Revision 7582c5682b1f1fca61956a8c77a4afbb16252724 authored by jsteemann on 16 November 2020, 23:51:21 UTC, committed by Facebook GitHub Bot on 17 November 2020, 02:29:51 UTC
Summary: Add ArangoDB to USERS.md. We are using RocksDB since 2016. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7675 Reviewed By: riversand963 Differential Revision: D24998955 Pulled By: ajkr fbshipit-source-id: 82c656bf56589e52aff8c491bab6fbc19b52cc91
1 parent 1861de4
rate_limiter.cc
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#include "util/rate_limiter.h"
#include "monitoring/statistics.h"
#include "port/port.h"
#include "rocksdb/env.h"
#include "test_util/sync_point.h"
#include "util/aligned_buffer.h"
namespace ROCKSDB_NAMESPACE {
size_t RateLimiter::RequestToken(size_t bytes, size_t alignment,
Env::IOPriority io_priority, Statistics* stats,
RateLimiter::OpType op_type) {
if (io_priority < Env::IO_TOTAL && IsRateLimited(op_type)) {
bytes = std::min(bytes, static_cast<size_t>(GetSingleBurstBytes()));
if (alignment > 0) {
// Here we may actually require more than burst and block
// but we can not write less than one page at a time on direct I/O
// thus we may want not to use ratelimiter
bytes = std::max(alignment, TruncateToPageBoundary(alignment, bytes));
}
Request(bytes, io_priority, stats, op_type);
}
return bytes;
}
// Pending request
struct GenericRateLimiter::Req {
explicit Req(int64_t _bytes, port::Mutex* _mu)
: request_bytes(_bytes), bytes(_bytes), cv(_mu), granted(false) {}
int64_t request_bytes;
int64_t bytes;
port::CondVar cv;
bool granted;
};
GenericRateLimiter::GenericRateLimiter(int64_t rate_bytes_per_sec,
int64_t refill_period_us,
int32_t fairness, RateLimiter::Mode mode,
Env* env, bool auto_tuned)
: RateLimiter(mode),
refill_period_us_(refill_period_us),
rate_bytes_per_sec_(auto_tuned ? rate_bytes_per_sec / 2
: rate_bytes_per_sec),
refill_bytes_per_period_(
CalculateRefillBytesPerPeriod(rate_bytes_per_sec_)),
env_(env),
stop_(false),
exit_cv_(&request_mutex_),
requests_to_wait_(0),
available_bytes_(0),
next_refill_us_(NowMicrosMonotonic(env_)),
fairness_(fairness > 100 ? 100 : fairness),
rnd_((uint32_t)time(nullptr)),
leader_(nullptr),
auto_tuned_(auto_tuned),
num_drains_(0),
prev_num_drains_(0),
max_bytes_per_sec_(rate_bytes_per_sec),
tuned_time_(NowMicrosMonotonic(env_)) {
total_requests_[0] = 0;
total_requests_[1] = 0;
total_bytes_through_[0] = 0;
total_bytes_through_[1] = 0;
}
GenericRateLimiter::~GenericRateLimiter() {
MutexLock g(&request_mutex_);
stop_ = true;
requests_to_wait_ = static_cast<int32_t>(queue_[Env::IO_LOW].size() +
queue_[Env::IO_HIGH].size());
for (auto& r : queue_[Env::IO_HIGH]) {
r->cv.Signal();
}
for (auto& r : queue_[Env::IO_LOW]) {
r->cv.Signal();
}
while (requests_to_wait_ > 0) {
exit_cv_.Wait();
}
}
// This API allows user to dynamically change rate limiter's bytes per second.
void GenericRateLimiter::SetBytesPerSecond(int64_t bytes_per_second) {
assert(bytes_per_second > 0);
rate_bytes_per_sec_ = bytes_per_second;
refill_bytes_per_period_.store(
CalculateRefillBytesPerPeriod(bytes_per_second),
std::memory_order_relaxed);
}
void GenericRateLimiter::Request(int64_t bytes, const Env::IOPriority pri,
Statistics* stats) {
assert(bytes <= refill_bytes_per_period_.load(std::memory_order_relaxed));
TEST_SYNC_POINT("GenericRateLimiter::Request");
TEST_SYNC_POINT_CALLBACK("GenericRateLimiter::Request:1",
&rate_bytes_per_sec_);
MutexLock g(&request_mutex_);
if (auto_tuned_) {
static const int kRefillsPerTune = 100;
std::chrono::microseconds now(NowMicrosMonotonic(env_));
if (now - tuned_time_ >=
kRefillsPerTune * std::chrono::microseconds(refill_period_us_)) {
Tune();
}
}
if (stop_) {
return;
}
++total_requests_[pri];
if (available_bytes_ >= bytes) {
// Refill thread assigns quota and notifies requests waiting on
// the queue under mutex. So if we get here, that means nobody
// is waiting?
available_bytes_ -= bytes;
total_bytes_through_[pri] += bytes;
return;
}
// Request cannot be satisfied at this moment, enqueue
Req r(bytes, &request_mutex_);
queue_[pri].push_back(&r);
do {
bool timedout = false;
// Leader election, candidates can be:
// (1) a new incoming request,
// (2) a previous leader, whose quota has not been not assigned yet due
// to lower priority
// (3) a previous waiter at the front of queue, who got notified by
// previous leader
if (leader_ == nullptr &&
((!queue_[Env::IO_HIGH].empty() &&
&r == queue_[Env::IO_HIGH].front()) ||
(!queue_[Env::IO_LOW].empty() &&
&r == queue_[Env::IO_LOW].front()))) {
leader_ = &r;
int64_t delta = next_refill_us_ - NowMicrosMonotonic(env_);
delta = delta > 0 ? delta : 0;
if (delta == 0) {
timedout = true;
} else {
int64_t wait_until = env_->NowMicros() + delta;
RecordTick(stats, NUMBER_RATE_LIMITER_DRAINS);
++num_drains_;
timedout = r.cv.TimedWait(wait_until);
}
} else {
// Not at the front of queue or an leader has already been elected
r.cv.Wait();
}
// request_mutex_ is held from now on
if (stop_) {
--requests_to_wait_;
exit_cv_.Signal();
return;
}
// Make sure the waken up request is always the header of its queue
assert(r.granted ||
(!queue_[Env::IO_HIGH].empty() &&
&r == queue_[Env::IO_HIGH].front()) ||
(!queue_[Env::IO_LOW].empty() &&
&r == queue_[Env::IO_LOW].front()));
assert(leader_ == nullptr ||
(!queue_[Env::IO_HIGH].empty() &&
leader_ == queue_[Env::IO_HIGH].front()) ||
(!queue_[Env::IO_LOW].empty() &&
leader_ == queue_[Env::IO_LOW].front()));
if (leader_ == &r) {
// Waken up from TimedWait()
if (timedout) {
// Time to do refill!
Refill();
// Re-elect a new leader regardless. This is to simplify the
// election handling.
leader_ = nullptr;
// Notify the header of queue if current leader is going away
if (r.granted) {
// Current leader already got granted with quota. Notify header
// of waiting queue to participate next round of election.
assert((queue_[Env::IO_HIGH].empty() ||
&r != queue_[Env::IO_HIGH].front()) &&
(queue_[Env::IO_LOW].empty() ||
&r != queue_[Env::IO_LOW].front()));
if (!queue_[Env::IO_HIGH].empty()) {
queue_[Env::IO_HIGH].front()->cv.Signal();
} else if (!queue_[Env::IO_LOW].empty()) {
queue_[Env::IO_LOW].front()->cv.Signal();
}
// Done
break;
}
} else {
// Spontaneous wake up, need to continue to wait
assert(!r.granted);
leader_ = nullptr;
}
} else {
// Waken up by previous leader:
// (1) if requested quota is granted, it is done.
// (2) if requested quota is not granted, this means current thread
// was picked as a new leader candidate (previous leader got quota).
// It needs to participate leader election because a new request may
// come in before this thread gets waken up. So it may actually need
// to do Wait() again.
assert(!timedout);
}
} while (!r.granted);
}
void GenericRateLimiter::Refill() {
TEST_SYNC_POINT("GenericRateLimiter::Refill");
next_refill_us_ = NowMicrosMonotonic(env_) + refill_period_us_;
// Carry over the left over quota from the last period
auto refill_bytes_per_period =
refill_bytes_per_period_.load(std::memory_order_relaxed);
if (available_bytes_ < refill_bytes_per_period) {
available_bytes_ += refill_bytes_per_period;
}
int use_low_pri_first = rnd_.OneIn(fairness_) ? 0 : 1;
for (int q = 0; q < 2; ++q) {
auto use_pri = (use_low_pri_first == q) ? Env::IO_LOW : Env::IO_HIGH;
auto* queue = &queue_[use_pri];
while (!queue->empty()) {
auto* next_req = queue->front();
if (available_bytes_ < next_req->request_bytes) {
// avoid starvation
next_req->request_bytes -= available_bytes_;
available_bytes_ = 0;
break;
}
available_bytes_ -= next_req->request_bytes;
next_req->request_bytes = 0;
total_bytes_through_[use_pri] += next_req->bytes;
queue->pop_front();
next_req->granted = true;
if (next_req != leader_) {
// Quota granted, signal the thread
next_req->cv.Signal();
}
}
}
}
int64_t GenericRateLimiter::CalculateRefillBytesPerPeriod(
int64_t rate_bytes_per_sec) {
if (port::kMaxInt64 / rate_bytes_per_sec < refill_period_us_) {
// Avoid unexpected result in the overflow case. The result now is still
// inaccurate but is a number that is large enough.
return port::kMaxInt64 / 1000000;
} else {
return std::max(kMinRefillBytesPerPeriod,
rate_bytes_per_sec * refill_period_us_ / 1000000);
}
}
Status GenericRateLimiter::Tune() {
const int kLowWatermarkPct = 50;
const int kHighWatermarkPct = 90;
const int kAdjustFactorPct = 5;
// computed rate limit will be in
// `[max_bytes_per_sec_ / kAllowedRangeFactor, max_bytes_per_sec_]`.
const int kAllowedRangeFactor = 20;
std::chrono::microseconds prev_tuned_time = tuned_time_;
tuned_time_ = std::chrono::microseconds(NowMicrosMonotonic(env_));
int64_t elapsed_intervals = (tuned_time_ - prev_tuned_time +
std::chrono::microseconds(refill_period_us_) -
std::chrono::microseconds(1)) /
std::chrono::microseconds(refill_period_us_);
// We tune every kRefillsPerTune intervals, so the overflow and division-by-
// zero conditions should never happen.
assert(num_drains_ - prev_num_drains_ <= port::kMaxInt64 / 100);
assert(elapsed_intervals > 0);
int64_t drained_pct =
(num_drains_ - prev_num_drains_) * 100 / elapsed_intervals;
int64_t prev_bytes_per_sec = GetBytesPerSecond();
int64_t new_bytes_per_sec;
if (drained_pct == 0) {
new_bytes_per_sec = max_bytes_per_sec_ / kAllowedRangeFactor;
} else if (drained_pct < kLowWatermarkPct) {
// sanitize to prevent overflow
int64_t sanitized_prev_bytes_per_sec =
std::min(prev_bytes_per_sec, port::kMaxInt64 / 100);
new_bytes_per_sec =
std::max(max_bytes_per_sec_ / kAllowedRangeFactor,
sanitized_prev_bytes_per_sec * 100 / (100 + kAdjustFactorPct));
} else if (drained_pct > kHighWatermarkPct) {
// sanitize to prevent overflow
int64_t sanitized_prev_bytes_per_sec = std::min(
prev_bytes_per_sec, port::kMaxInt64 / (100 + kAdjustFactorPct));
new_bytes_per_sec =
std::min(max_bytes_per_sec_,
sanitized_prev_bytes_per_sec * (100 + kAdjustFactorPct) / 100);
} else {
new_bytes_per_sec = prev_bytes_per_sec;
}
if (new_bytes_per_sec != prev_bytes_per_sec) {
SetBytesPerSecond(new_bytes_per_sec);
}
num_drains_ = prev_num_drains_;
return Status::OK();
}
RateLimiter* NewGenericRateLimiter(
int64_t rate_bytes_per_sec, int64_t refill_period_us /* = 100 * 1000 */,
int32_t fairness /* = 10 */,
RateLimiter::Mode mode /* = RateLimiter::Mode::kWritesOnly */,
bool auto_tuned /* = false */) {
assert(rate_bytes_per_sec > 0);
assert(refill_period_us > 0);
assert(fairness > 0);
return new GenericRateLimiter(rate_bytes_per_sec, refill_period_us, fairness,
mode, Env::Default(), auto_tuned);
}
} // namespace ROCKSDB_NAMESPACE
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...