Revision 761bfb999868c413aabed8caa345694836ec6f11 authored by Alex Deucher on 06 August 2013, 17:34:00 UTC, committed by Alex Deucher on 07 August 2013, 21:37:19 UTC
The rlc is required for dpm to work properly, so if the rlc ucode is missing, don't enable dpm. Enabling dpm without the rlc enabled can result in hangs. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1 parent f61d5b4
ltc4151.c
/*
* Driver for Linear Technology LTC4151 High Voltage I2C Current
* and Voltage Monitor
*
* Copyright (C) 2011 AppearTV AS
*
* Derived from:
*
* Driver for Linear Technology LTC4261 I2C Negative Voltage Hot
* Swap Controller
* Copyright (C) 2010 Ericsson AB.
*
* Datasheet: http://www.linear.com/docs/Datasheet/4151fc.pdf
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>
/* chip registers */
#define LTC4151_SENSE_H 0x00
#define LTC4151_SENSE_L 0x01
#define LTC4151_VIN_H 0x02
#define LTC4151_VIN_L 0x03
#define LTC4151_ADIN_H 0x04
#define LTC4151_ADIN_L 0x05
struct ltc4151_data {
struct device *hwmon_dev;
struct mutex update_lock;
bool valid;
unsigned long last_updated; /* in jiffies */
/* Registers */
u8 regs[6];
};
static struct ltc4151_data *ltc4151_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct ltc4151_data *data = i2c_get_clientdata(client);
struct ltc4151_data *ret = data;
mutex_lock(&data->update_lock);
/*
* The chip's A/D updates 6 times per second
* (Conversion Rate 6 - 9 Hz)
*/
if (time_after(jiffies, data->last_updated + HZ / 6) || !data->valid) {
int i;
dev_dbg(&client->dev, "Starting ltc4151 update\n");
/* Read all registers */
for (i = 0; i < ARRAY_SIZE(data->regs); i++) {
int val;
val = i2c_smbus_read_byte_data(client, i);
if (unlikely(val < 0)) {
dev_dbg(dev,
"Failed to read ADC value: error %d\n",
val);
ret = ERR_PTR(val);
goto abort;
}
data->regs[i] = val;
}
data->last_updated = jiffies;
data->valid = 1;
}
abort:
mutex_unlock(&data->update_lock);
return ret;
}
/* Return the voltage from the given register in mV */
static int ltc4151_get_value(struct ltc4151_data *data, u8 reg)
{
u32 val;
val = (data->regs[reg] << 4) + (data->regs[reg + 1] >> 4);
switch (reg) {
case LTC4151_ADIN_H:
/* 500uV resolution. Convert to mV. */
val = val * 500 / 1000;
break;
case LTC4151_SENSE_H:
/*
* 20uV resolution. Convert to current as measured with
* an 1 mOhm sense resistor, in mA.
*/
val = val * 20;
break;
case LTC4151_VIN_H:
/* 25 mV per increment */
val = val * 25;
break;
default:
/* If we get here, the developer messed up */
WARN_ON_ONCE(1);
val = 0;
break;
}
return val;
}
static ssize_t ltc4151_show_value(struct device *dev,
struct device_attribute *da, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct ltc4151_data *data = ltc4151_update_device(dev);
int value;
if (IS_ERR(data))
return PTR_ERR(data);
value = ltc4151_get_value(data, attr->index);
return snprintf(buf, PAGE_SIZE, "%d\n", value);
}
/*
* Input voltages.
*/
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ltc4151_show_value, NULL,
LTC4151_VIN_H);
static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc4151_show_value, NULL,
LTC4151_ADIN_H);
/* Currents (via sense resistor) */
static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc4151_show_value, NULL,
LTC4151_SENSE_H);
/*
* Finally, construct an array of pointers to members of the above objects,
* as required for sysfs_create_group()
*/
static struct attribute *ltc4151_attributes[] = {
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_curr1_input.dev_attr.attr,
NULL,
};
static const struct attribute_group ltc4151_group = {
.attrs = ltc4151_attributes,
};
static int ltc4151_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = client->adapter;
struct ltc4151_data *data;
int ret;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
/* Register sysfs hooks */
ret = sysfs_create_group(&client->dev.kobj, <c4151_group);
if (ret)
return ret;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
ret = PTR_ERR(data->hwmon_dev);
goto out_hwmon_device_register;
}
return 0;
out_hwmon_device_register:
sysfs_remove_group(&client->dev.kobj, <c4151_group);
return ret;
}
static int ltc4151_remove(struct i2c_client *client)
{
struct ltc4151_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, <c4151_group);
return 0;
}
static const struct i2c_device_id ltc4151_id[] = {
{ "ltc4151", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ltc4151_id);
/* This is the driver that will be inserted */
static struct i2c_driver ltc4151_driver = {
.driver = {
.name = "ltc4151",
},
.probe = ltc4151_probe,
.remove = ltc4151_remove,
.id_table = ltc4151_id,
};
module_i2c_driver(ltc4151_driver);
MODULE_AUTHOR("Per Dalen <per.dalen@appeartv.com>");
MODULE_DESCRIPTION("LTC4151 driver");
MODULE_LICENSE("GPL");
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...