Revision 761bfb999868c413aabed8caa345694836ec6f11 authored by Alex Deucher on 06 August 2013, 17:34:00 UTC, committed by Alex Deucher on 07 August 2013, 21:37:19 UTC
The rlc is required for dpm to work properly, so if the rlc ucode is missing, don't enable dpm. Enabling dpm without the rlc enabled can result in hangs. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1 parent f61d5b4
of_regulator.c
/*
* OF helpers for regulator framework
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
static void of_get_regulation_constraints(struct device_node *np,
struct regulator_init_data **init_data)
{
const __be32 *min_uV, *max_uV, *uV_offset;
const __be32 *min_uA, *max_uA, *ramp_delay;
struct regulation_constraints *constraints = &(*init_data)->constraints;
constraints->name = of_get_property(np, "regulator-name", NULL);
min_uV = of_get_property(np, "regulator-min-microvolt", NULL);
if (min_uV)
constraints->min_uV = be32_to_cpu(*min_uV);
max_uV = of_get_property(np, "regulator-max-microvolt", NULL);
if (max_uV)
constraints->max_uV = be32_to_cpu(*max_uV);
/* Voltage change possible? */
if (constraints->min_uV != constraints->max_uV)
constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
/* Only one voltage? Then make sure it's set. */
if (min_uV && max_uV && constraints->min_uV == constraints->max_uV)
constraints->apply_uV = true;
uV_offset = of_get_property(np, "regulator-microvolt-offset", NULL);
if (uV_offset)
constraints->uV_offset = be32_to_cpu(*uV_offset);
min_uA = of_get_property(np, "regulator-min-microamp", NULL);
if (min_uA)
constraints->min_uA = be32_to_cpu(*min_uA);
max_uA = of_get_property(np, "regulator-max-microamp", NULL);
if (max_uA)
constraints->max_uA = be32_to_cpu(*max_uA);
/* Current change possible? */
if (constraints->min_uA != constraints->max_uA)
constraints->valid_ops_mask |= REGULATOR_CHANGE_CURRENT;
if (of_find_property(np, "regulator-boot-on", NULL))
constraints->boot_on = true;
if (of_find_property(np, "regulator-always-on", NULL))
constraints->always_on = true;
else /* status change should be possible if not always on. */
constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS;
if (of_property_read_bool(np, "regulator-allow-bypass"))
constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS;
ramp_delay = of_get_property(np, "regulator-ramp-delay", NULL);
if (ramp_delay)
constraints->ramp_delay = be32_to_cpu(*ramp_delay);
}
/**
* of_get_regulator_init_data - extract regulator_init_data structure info
* @dev: device requesting for regulator_init_data
*
* Populates regulator_init_data structure by extracting data from device
* tree node, returns a pointer to the populated struture or NULL if memory
* alloc fails.
*/
struct regulator_init_data *of_get_regulator_init_data(struct device *dev,
struct device_node *node)
{
struct regulator_init_data *init_data;
if (!node)
return NULL;
init_data = devm_kzalloc(dev, sizeof(*init_data), GFP_KERNEL);
if (!init_data)
return NULL; /* Out of memory? */
of_get_regulation_constraints(node, &init_data);
return init_data;
}
EXPORT_SYMBOL_GPL(of_get_regulator_init_data);
/**
* of_regulator_match - extract multiple regulator init data from device tree.
* @dev: device requesting the data
* @node: parent device node of the regulators
* @matches: match table for the regulators
* @num_matches: number of entries in match table
*
* This function uses a match table specified by the regulator driver to
* parse regulator init data from the device tree. @node is expected to
* contain a set of child nodes, each providing the init data for one
* regulator. The data parsed from a child node will be matched to a regulator
* based on either the deprecated property regulator-compatible if present,
* or otherwise the child node's name. Note that the match table is modified
* in place.
*
* Returns the number of matches found or a negative error code on failure.
*/
int of_regulator_match(struct device *dev, struct device_node *node,
struct of_regulator_match *matches,
unsigned int num_matches)
{
unsigned int count = 0;
unsigned int i;
const char *name;
struct device_node *child;
if (!dev || !node)
return -EINVAL;
for (i = 0; i < num_matches; i++) {
struct of_regulator_match *match = &matches[i];
match->init_data = NULL;
match->of_node = NULL;
}
for_each_child_of_node(node, child) {
name = of_get_property(child,
"regulator-compatible", NULL);
if (!name)
name = child->name;
for (i = 0; i < num_matches; i++) {
struct of_regulator_match *match = &matches[i];
if (match->of_node)
continue;
if (strcmp(match->name, name))
continue;
match->init_data =
of_get_regulator_init_data(dev, child);
if (!match->init_data) {
dev_err(dev,
"failed to parse DT for regulator %s\n",
child->name);
return -EINVAL;
}
match->of_node = child;
count++;
break;
}
}
return count;
}
EXPORT_SYMBOL_GPL(of_regulator_match);
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...