https://github.com/torvalds/linux
Revision 77b071e7931dd762563ac74e3e448b2aef23ad2f authored by Marek Vasut on 08 May 2015, 05:25:49 UTC, committed by Dmitry Torokhov on 22 May 2015, 00:06:13 UTC
Wait a little bit longer, 50mS instead of 20mS, until the driver starts polling for pen-up. The problematic behavior before this patch is applied is as follows. The behavior was observed on the STMPE610QTR controller. Upon a physical pen-down event, the touchscreen reports one set of x-y-p coordinates and a pen-down event. After that, the pen-up polling is triggered and since the controller is not ready yet, the polling mistakenly detects a pen-up event while the physical state is still such that the pen is down on the touch surface. The pen-up handling flushes the controller FIFO, so after that, all the samples in the controller are discarded. The controller becomes ready shortly after this bogus pen-up handling and does generate again a pen-down interrupt. This time, the controller contains x-y-p samples which all read as zero. Since pressure value is zero, this set of samples is effectively ignored by userland. In the end, the driver just bounces between pen-down and bogus pen-up handling, generating no useful results. Fix this by giving the controller a bit more time before polling it for pen-up. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
1 parent e686e9e
Tip revision: 77b071e7931dd762563ac74e3e448b2aef23ad2f authored by Marek Vasut on 08 May 2015, 05:25:49 UTC
Input: smtpe-ts - wait 50mS until polling for pen-up
Input: smtpe-ts - wait 50mS until polling for pen-up
Tip revision: 77b071e
File | Mode | Size |
---|---|---|
Documentation | ||
arch | ||
block | ||
crypto | ||
drivers | ||
firmware | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.gitignore | -rw-r--r-- | 1.2 KB |
.mailmap | -rw-r--r-- | 4.9 KB |
COPYING | -rw-r--r-- | 18.3 KB |
CREDITS | -rw-r--r-- | 94.0 KB |
Kbuild | -rw-r--r-- | 2.1 KB |
Kconfig | -rw-r--r-- | 252 bytes |
MAINTAINERS | -rw-r--r-- | 299.3 KB |
Makefile | -rw-r--r-- | 53.3 KB |
README | -rw-r--r-- | 18.3 KB |
REPORTING-BUGS | -rw-r--r-- | 7.3 KB |
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...