Revision 780dc9ba4eb682a89be48d5b814feae6722a19e0 authored by Afzal Mohammed on 08 November 2011, 13:24:10 UTC, committed by Mark Brown on 23 November 2011, 14:03:52 UTC
Count of selector voltage is required for regulator_set_voltage to work via set_voltage_sel. VDD1/2 currently have it as zero, so regulator_set_voltage won't work for VDD1/2. Update count (n_voltages) for VDD1/2. Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain With above expr, number of voltages that can be selected is step value count * gain count constant for gain count will be called VDD1_2_NUM_VOLT_COARSE existing constant for step value count is VDD1_2_NUM_VOLTS, use VDD1_2_NUM_VOLT_FINE instead to make clear that step value is not the only component in deciding selectable voltage count Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
1 parent cfcfc9e
| File | Mode | Size |
|---|---|---|
| 00-INDEX | -rw-r--r-- | 2.3 KB |
| arkfb.txt | -rw-r--r-- | 2.0 KB |
| aty128fb.txt | -rw-r--r-- | 2.1 KB |
| cirrusfb.txt | -rw-r--r-- | 1.9 KB |
| cmap_xfbdev.txt | -rw-r--r-- | 1.9 KB |
| deferred_io.txt | -rw-r--r-- | 3.0 KB |
| efifb.txt | -rw-r--r-- | 593 bytes |
| ep93xx-fb.txt | -rw-r--r-- | 4.2 KB |
| fbcon.txt | -rw-r--r-- | 11.5 KB |
| framebuffer.txt | -rw-r--r-- | 14.0 KB |
| gxfb.txt | -rw-r--r-- | 1.2 KB |
| intel810.txt | -rw-r--r-- | 8.3 KB |
| intelfb.txt | -rw-r--r-- | 3.6 KB |
| internals.txt | -rw-r--r-- | 2.6 KB |
| lxfb.txt | -rw-r--r-- | 1.2 KB |
| matroxfb.txt | -rw-r--r-- | 19.1 KB |
| metronomefb.txt | -rw-r--r-- | 2.0 KB |
| modedb.txt | -rw-r--r-- | 6.7 KB |
| pvr2fb.txt | -rw-r--r-- | 2.2 KB |
| pxafb.txt | -rw-r--r-- | 4.6 KB |
| s3fb.txt | -rw-r--r-- | 2.5 KB |
| sa1100fb.txt | -rw-r--r-- | 1.3 KB |
| sh7760fb.txt | -rw-r--r-- | 4.4 KB |
| sisfb.txt | -rw-r--r-- | 6.3 KB |
| sm501.txt | -rw-r--r-- | 291 bytes |
| sstfb.txt | -rw-r--r-- | 6.7 KB |
| tgafb.txt | -rw-r--r-- | 2.4 KB |
| tridentfb.txt | -rw-r--r-- | 2.6 KB |
| udlfb.txt | -rw-r--r-- | 7.0 KB |
| uvesafb.txt | -rw-r--r-- | 6.9 KB |
| vesafb.txt | -rw-r--r-- | 6.1 KB |
| viafb.modes | -rw-r--r-- | 30.8 KB |
| viafb.txt | -rw-r--r-- | 9.6 KB |
| vt8623fb.txt | -rw-r--r-- | 1.8 KB |
Computing file changes ...
