Revision 780dc9ba4eb682a89be48d5b814feae6722a19e0 authored by Afzal Mohammed on 08 November 2011, 13:24:10 UTC, committed by Mark Brown on 23 November 2011, 14:03:52 UTC
Count of selector voltage is required for regulator_set_voltage to work via set_voltage_sel. VDD1/2 currently have it as zero, so regulator_set_voltage won't work for VDD1/2. Update count (n_voltages) for VDD1/2. Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain With above expr, number of voltages that can be selected is step value count * gain count constant for gain count will be called VDD1_2_NUM_VOLT_COARSE existing constant for step value count is VDD1_2_NUM_VOLTS, use VDD1_2_NUM_VOLT_FINE instead to make clear that step value is not the only component in deciding selectable voltage count Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
1 parent cfcfc9e
File | Mode | Size |
---|---|---|
.gitignore | -rw-r--r-- | 14 bytes |
IRQ-redir.txt | -rw-r--r-- | 2.5 KB |
Makefile | -rw-r--r-- | 218 bytes |
README | -rw-r--r-- | 1.2 KB |
aliasing-test.c | -rw-r--r-- | 6.0 KB |
aliasing.txt | -rw-r--r-- | 8.5 KB |
efirtc.txt | -rw-r--r-- | 4.3 KB |
err_inject.txt | -rw-r--r-- | 25.2 KB |
fsys.txt | -rw-r--r-- | 11.8 KB |
kvm.txt | -rw-r--r-- | 3.0 KB |
mca.txt | -rw-r--r-- | 8.8 KB |
paravirt_ops.txt | -rw-r--r-- | 6.2 KB |
serial.txt | -rw-r--r-- | 6.3 KB |
xen.txt | -rw-r--r-- | 5.5 KB |
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...