| 7859557 | Alan Cox | 03 July 2007, 20:28:35 UTC | ide: Fix a theoretical Ooops case Found by a static analyser. It is in theory possible we dereference dev->id when it has become invalid. Re-order to avoid this. Not needed for new-ide as we no longer support the crazy exabyte nest stuff Signed-off-by: Alan Cox <alan@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 03 July 2007, 20:28:35 UTC |
| b42fa13 | Masatake YAMATO | 03 July 2007, 20:28:34 UTC | ide: never called printk statement in ide-taskfile.c::wait_drive_not_busy Look at wait_drive_not_busy in drivers/ide/ide-taskfile.c: static u8 wait_drive_not_busy(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); int retries = 100; u8 stat; /* * Last sector was transfered, wait until drive is ready. * This can take up to 10 usec, but we will wait max 1 ms * (drive_cmd_intr() waits that long). */ while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) udelay(10); if (!retries) printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); return stat; } `printk' is never called because `retries' never holds zero at the outside of `while' loop: when `retries' holds zero at the while's loop condition, `retries' will hold -1 at the if condition. Signed-off-by: Masatake YAMATO <jet@gyve.org> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: joe@perches.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 03 July 2007, 20:28:34 UTC |
| 872aad4 | Alan Cox | 03 July 2007, 14:14:05 UTC | pata_pcmcia: Switch to ata_sff_port_start PCMCIA doesn't use DMA and as this driver is used on many platforms we don't want it to fail on those that define the DMA alloc API as a NULL return Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 July 2007, 15:31:06 UTC |
| a0ac38f | Alan Cox | 03 July 2007, 14:15:13 UTC | pata_pdc202xx_old: Correct cable detect logic We got it backwards and now the other detects are fixed it shows up Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 July 2007, 14:11:12 UTC |
| d6f4d5e | Alan Cox | 03 July 2007, 14:11:30 UTC | ata_generic: Check the right register for the DMA enabled flags Mirrors change in IT821X Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 July 2007, 14:09:29 UTC |
| ee58150 | Chuck Ebbert | 25 June 2007, 23:13:32 UTC | pata_ali: fix UDMA settings This patch was found to fix some of the problems with the pata_ali driver. https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=156482 Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 July 2007, 14:06:45 UTC |
| d9f9c6b | Florian Attenberger | 02 July 2007, 15:09:29 UTC | sata_mv: PCI-ID for Adaptec 1430SA SATA Controller Signed-off-by: Florian Attenberger <valdyn@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 July 2007, 14:06:35 UTC |
| 4031826 | Tejun Heo | 02 July 2007, 16:38:47 UTC | libata: fix assigned IRQ reporting host->irq and host->irq2 should be set before ata_host_register() for IRQ reporting to work. Move up host->irq assignment in ata_host_activate() and add it to ata_pci_init_one() native path and pata_cs5520. The port info printing in ata_host_register() doesn't fit all the different controllers. It should probably be moved out to LLDs with some helpers in the future. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 July 2007, 14:06:35 UTC |
| aa2e09d | Len Brown | 03 July 2007, 03:57:45 UTC | ACPI: fix acpi_osi=!Linux Need to check for special case "acpi_osi=!Linux" before handling the general case "acpi_osi=!*", or it will have no effect. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 July 2007, 04:06:48 UTC |
| 52c4d73 | Linus Torvalds | 03 July 2007, 04:05:35 UTC | Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IPoIB/cm: Partial error clean up unmaps wrong address mlx4_core: Add new Mellanox device IDs | 03 July 2007, 04:05:35 UTC |
| ca9c5ff | Linus Torvalds | 03 July 2007, 04:05:14 UTC | Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin arch: remove zero-sized include/asm-blackfin/macros.h Blackfin arch: update board defconfig files Blackfin arch: Fix up remaining printks with proper log levels Blackfin arch: Add proper -mcpu option according to the cpu and silicon revision configuration | 03 July 2007, 04:05:14 UTC |
| c1fa238 | Linus Torvalds | 03 July 2007, 04:04:36 UTC | Merge branch 'upstream-linus2' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus2' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_nv: undo merge error | 03 July 2007, 04:04:36 UTC |
| b59449b | Linus Torvalds | 03 July 2007, 04:01:38 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: 3c589_cs: fix local_bh_enable warning RESEND [PATCH 3/3] NetXen: Graceful teardown of interface and hardware upon module unload drivers/net/ns83820.c: fix a check-after-use net/usb/cdc_ether minor sparse cleanup RESEND [PATCH 2/3] NetXen: Support per PCI-function interrupt mask registers RESEND [PATCH 1/3] NetXen: Fix issue of MSI not working correctly dm9601: Return 0 from bind() on success Update MAINTAINERS for USB network devices usbnet: Zero padding byte if there is tail room in skb dm9601: HW header size shouldn't be included in packet length starfire list alpha as 64 bit arch myri10ge: SET_NETDEV_DEV() gianfar: Fix typo bug introduced by move to udp_hdr() [PATCH] libertas: remove private ioctls [PATCH] libertas: fix WPA associations by handling ENABLE_RSN correctly [PATCH] libertas: kill wlan_scan_process_results [PATCH] libertas: style fixes | 03 July 2007, 04:01:38 UTC |
| fffe566 | Linus Torvalds | 03 July 2007, 04:01:13 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: PATA-mode fixes for sis_sata libata: add HTS541616J9SA00 to NCQ blacklist sata_nv: allow changing queue depth sata_inic162x: disable LBA48 devices libata: remove reading alt_status from ata_hsm_qc_complete() libata: pata_pdc2027x PLL input clock fix scsi disk help file is not complete | 03 July 2007, 04:01:13 UTC |
| dcf87a2 | Linus Torvalds | 03 July 2007, 03:59:54 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: add Kconfig help on building both stacks firewire: fix async reception on big endian machines | 03 July 2007, 03:59:54 UTC |
| 841adfc | Ralph Campbell | 29 June 2007, 18:37:56 UTC | IPoIB/cm: Partial error clean up unmaps wrong address If a page can't be allocated for the frag list of a skb, the code to unmap the partially allocated list is off by one. For exaple, if 'frags' equals one, i == 0, and the alloc_page() fails, then the old loop would have unmapped mapping[1] which is uninitialized. The same would happen if the call to ib_dma_map_page() failed. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Acked-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> | 03 July 2007, 03:48:31 UTC |
| 786f238 | Jack Morgenstein | 02 July 2007, 14:36:18 UTC | mlx4_core: Add new Mellanox device IDs Add new IDs for PCIe gen2 devices. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> | 03 July 2007, 03:41:35 UTC |
| 7718457 | Marco Roeland | 03 July 2007, 00:25:50 UTC | Blackfin arch: remove zero-sized include/asm-blackfin/macros.h This file accidentally got truncated instead of deleted in commit df30b11. Signed-off-by: Marco Roeland <marco.roeland@xs4all.nl> Cc: Robert P. J. Day <rpjday@mindspring.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Jesper Juhl <jesper.juhl@gmail.com> Cc: Alex Riesen <raa.lkml@gmail.com> Cc: Robin Getz <robin.getz@analog.com> Acked-by: Bryan Wu <bryan.wu@analog.com> | 03 July 2007, 00:25:50 UTC |
| 531e3a6 | Jeff Garzik | 02 July 2007, 22:12:19 UTC | [libata] sata_nv: undo merge error Only the ADMA entry was supposed to be able to change queue depth. Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 22:12:19 UTC |
| 63ac9b9 | Patrick McHardy | 02 July 2007, 14:08:28 UTC | 3c589_cs: fix local_bh_enable warning Russell King wrote: > Having upgraded from 2.6.16 to 2.6.22-rc6, I'm now seeing the following. > > Looks like netfilter is calling local_bh_enable() with IRQs disabled, > which would appear to be illegal. Thankfully, this is a warn-once > warning. > > WARNING: at /home/rmk/git/linux-2.6-rmk/kernel/softirq.c:138 local_bh_enable() > [...] > [<c01447fc>] (nf_conntrack_destroy+0x0/0x2c) from [<c012c05c>] (__kfree_skb+0xd0/0x100) > [<c012bf8c>] (__kfree_skb+0x0/0x100) from [<c012c0d8>] (kfree_skb+0x4c/0x50) > r5:c12a3800 r4:00000300 > [<c012c08c>] (kfree_skb+0x0/0x50) from [<bf03cbb0>] (el3_start_xmit+0xb8/0xd0 [3c589_cs]) > [<bf03caf8>] (el3_start_xmit+0x0/0xd0 [3c589_cs]) from [<c01324dc>] (dev_hard_start_xmit+0x1a8/0x244) > r7:c12a3800 r6:c1a9aa00 r5:c1a9aa00 r4:c12a3800 > [<c0132334>] (dev_hard_start_xmit+0x0/0x244) from [<c013fcc0>] (__qdisc_run+0xb0/0x198) Thats a bug in the 3c589_cs driver. Patch attached. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 14:50:46 UTC |
| a3cabb2 | Uwe Koziolek | 14 June 2007, 21:40:43 UTC | libata: PATA-mode fixes for sis_sata Changed PATA handler for PATA-ports used by sata_sis. This patch was originally submitted by Jeff Garzik. Added PCI-ID 1180 for SiS966 Controller in pata_sis. The 1180 mode is fully compatible to other SiS PATA-controller. The PCI-ID 1183 is SATA in PATA-emulation, but not fully compatible to SiS5513/5518. sata_sis.c is forwarding this ID to pata_sis. 1183 is not working if simply added to pata_sis. This handling fixes issues with SiS968. Signed-off-by: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 14:17:42 UTC |
| e14cbfa | Tejun Heo | 25 June 2007, 02:28:59 UTC | libata: add HTS541616J9SA00 to NCQ blacklist Another member of HTS5416* family doing spurious NCQ completion. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Enrico Sardi <enricoss@tiscali.it> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 14:14:02 UTC |
| 1e0b5ab | Robert Hancock | 29 June 2007, 00:52:24 UTC | sata_nv: allow changing queue depth The sata_nv driver was missing the change_queue_depth hook in the SCSI host template which the other NCQ-capable libata drivers had. This made it impossible to change the queue depth by user request. Add this in. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 14:14:02 UTC |
| 90c9378 | Tejun Heo | 29 June 2007, 02:33:08 UTC | sata_inic162x: disable LBA48 devices sata_inic162x can't do LBA48 properly yet and is likely to corrupt data on drives larger than LBA28 limit. Disable LBA48 devices during device configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 14:12:34 UTC |
| 74cdbba | Albert Lee | 28 June 2007, 02:05:31 UTC | libata: remove reading alt_status from ata_hsm_qc_complete() In ata_hsm_qc_complete(): Calling ata_altstatus() after the qc is completed might race with next qc. Remove it. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 14:12:34 UTC |
| 8c781bf | Albert Lee | 26 June 2007, 05:43:15 UTC | libata: pata_pdc2027x PLL input clock fix Recently the PLL input clock of pata_pdc2027x is sometimes detected higer than expected (e.g. 20.027 MHz compared to 16.714 MHz). It seems sometimes the mdelay() function is not as precise as it used to be. Per Alan's advice, HT or power management might affect the precision of mdelay(). This patch calls gettimeofday() to mesure the time elapsed and calculate the PLL input clock accordingly. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 14:12:34 UTC |
| abcdceb | Randy Dunlap | 11 June 2007, 18:59:34 UTC | scsi disk help file is not complete On Mon, 11 Jun 2007 20:28:16 +0200 api wrote: > Good day, > When doing make menuconfig one comes across CONFIG_BLK_DEV_SD. > The help file states that this is for scsi disks.NO MENTION IS MADE THAT > IT IS NEEDE FOR SATA DISKS AS WELL! > Would have saved me a lot of time if the help was up to date. > I hope this can be changed so others can make a kernel for sata systems > quicker. From: Randy Dunlap <randy.dunlap@oracle.com> Add help info for BLK_DEV_SD referring to its use in SATA or PATA driver configurations. Add help text for "ATA" indicating that it probably needs some SCSI config symbols enabled in order to be useful. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 14:12:34 UTC |
| 96acb6e | Dhananjay Phadke | 02 July 2007, 04:07:57 UTC | RESEND [PATCH 3/3] NetXen: Graceful teardown of interface and hardware upon module unload Resending patch 3/3 only. These changes allow driver close routine to be called during module unload, to clean-up buffers and other software resources, flush queues etc. Also, hardware is reset to pristine state. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Milan Bag <mbag@netxen.com> Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 12:24:52 UTC |
| d14e37e | Adrian Bunk | 01 July 2007, 20:21:10 UTC | drivers/net/ns83820.c: fix a check-after-use This patch fixes a check-after-use spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 12:24:52 UTC |
| afaee82 | David Brownell | 01 July 2007, 18:47:59 UTC | net/usb/cdc_ether minor sparse cleanup Remove an "sparse" warning about a shadowed variable name. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 12:24:52 UTC |
| 2d1a3bb | dhananjay.phadke@gmail.com | 01 July 2007, 18:56:00 UTC | RESEND [PATCH 2/3] NetXen: Support per PCI-function interrupt mask registers This patch updates the various access routines to access different control and status settings present in different register locations. This will fix problems related to working of different ports in multi Port card. Signed-off by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off by: Milan Bag <mbag@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 12:24:52 UTC |
| 644caee | dhananjay.phadke@gmail.com | 01 July 2007, 18:55:59 UTC | RESEND [PATCH 1/3] NetXen: Fix issue of MSI not working correctly NetXen driver uses PCI function 0 to provide the functionality of MSI. The patch makes driver check the bus master bit for function 0 and enable it after the card initialization. Signed-off-by: Dhananjay Phadke<dhananjay@netxen.com> Signed-off-by: Milan Bag <mbag@netxen.com> Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 12:24:52 UTC |
| b8f5958 | Peter Korsgaard | 30 June 2007, 21:07:42 UTC | dm9601: Return 0 from bind() on success Fixup dm9601_bind() so it returns 0 on success rather than just a positive number, as otherwise usbnet doesn't init the status handler. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 12:24:51 UTC |
| 043600a | Peter Korsgaard | 27 June 2007, 19:18:18 UTC | Update MAINTAINERS for USB network devices >>>>> "Greg" == Greg KH <greg@kroah.com> writes: Greg> Yeah, this is the cdc_acm driver that is still in the USB drivers/ Greg> directory tree as it is a USB class driver that shows up as a tty device Greg> to userspace. It should not be moved to the networking list unless no Greg> one minds that I never see any queries about it :) Ok, here's an updated patch: Questions regarding the USB network drivers should now go to netdev. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 12:24:51 UTC |
| 3e323f3 | Peter Korsgaard | 27 June 2007, 06:48:15 UTC | usbnet: Zero padding byte if there is tail room in skb Usbnet adds a padding byte if a 0 byte USB packet would be sent. Zero padding byte if there is tail room in skb. Signed-of-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 12:24:51 UTC |
| 23de559 | Peter Korsgaard | 27 June 2007, 06:14:50 UTC | dm9601: HW header size shouldn't be included in packet length The dm9601 driver was including the 2 byte hardware header in the packet length, causing the HW to send 2 extra bytes of garbage on tx. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 12:24:51 UTC |
| 983b7dc | maximilian attems | 24 June 2007, 21:36:45 UTC | starfire list alpha as 64 bit arch instead of: "This driver has not been ported to this 64-bit architecture yet." the driver is said to work on alpha, see http://bugs.debian.org/305330 Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 12:24:51 UTC |
| b245fb6 | Maik Hampel | 28 June 2007, 15:07:26 UTC | myri10ge: SET_NETDEV_DEV() SET_NETDEV_DEV() in myri10ge to create the "/sys/class/net/<if>/device" symlink. Signed-off-by: Maik Hampel <m.hampel@gmx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 02 July 2007, 12:24:51 UTC |
| c529e63 | Jeff Garzik | 02 July 2007, 12:15:33 UTC | Merge branch 'for_linus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into upstream-fixes | 02 July 2007, 12:15:33 UTC |
| 36f9d0c | Jeff Garzik | 02 July 2007, 12:14:30 UTC | Merge branch 'libertas-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes | 02 July 2007, 12:14:30 UTC |
| 4a3207a | Mike Frysinger | 02 July 2007, 05:49:15 UTC | Blackfin arch: update board defconfig files Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> | 02 July 2007, 05:49:15 UTC |
| a38d618 | Linus Torvalds | 01 July 2007, 19:54:24 UTC | Linux 2.6.22-rc7 Last -rc? That's the plan.. | 01 July 2007, 19:54:24 UTC |
| 2391dae | Rafael J. Wysocki | 01 July 2007, 19:07:33 UTC | PM: introduce set_target method in pm_ops Commit 52ade9b3b97fd3bea42842a056fe0786c28d0555 changed the suspend code ordering to execute pm_ops->prepare() after the device model per-device .suspend() calls in order to fix some ACPI-related issues. Unfortunately, it broke the at91 platform which assumed that pm_ops->prepare() would be called before suspending devices. at91 used pm_ops->prepare() to get notified of the target system sleep state, so that it could use this information while suspending devices. However, with the current suspend code ordering pm_ops->prepare() is called too late for this purpose. Thus, at91 needs an additional method in 'struct pm_ops' that will be used for notifying the platform of the target system sleep state. Moreover, in the future such a method will also be needed by ACPI. This patch adds the .set_target() method to 'struct pm_ops' and makes the suspend code call it, if implemented, before executing the device model per-device .suspend() calls. It also modifies the at91 code to use pm_ops->set_target() instead of pm_ops->prepare(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2007, 19:29:44 UTC |
| cbcdd77 | Bjorn Helgaas | 01 July 2007, 19:06:49 UTC | smsc-ircc2: bypass PNP detection until we get the quirks worked out Don't use PNP detection by default yet. We have some PNP and BIOS issues to work out first. Sample problem on a Toshiba Portege 4000: the SMCf010 device is handed off disabled. We assign I/O ports originally assigned to the SMCf010 to a PCMCIA device instead. We enable the SMCf010, configuring it to use disjoint ports, but _SRS doesn't work correctly, so the device doesn't work. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2007, 19:29:44 UTC |
| 84288ad | Andrew Morton | 01 July 2007, 19:06:48 UTC | i386: mtrr crash fix Commit 3ebad5905609476a4ff1151a66b21d9794009961 ("[PATCH] x86: Save and restore the fixed-range MTRRs of the BSP when suspending") added mtrr operations without verifying that the CPU has MTRRs. Crashes transmeta CPUs. Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux@horizon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2007, 19:29:44 UTC |
| 5ebffd7 | Maxime Austruy | 01 July 2007, 19:06:38 UTC | asus_acpi: fix oops on non-asus machines If asus_acpi_init doesn't find any device it knows about, it mistakenly returns a "success" error code even though it cleans up after itself. Later when trying to rmmod asus_acpi, the module_exit routine would try to clean up one more time and we would end up calling acpi_bus_unregister_driver(&asus_hotk_driver) twice. This patch addresses this first problem by returning -ENODEV when no appropriate device is found. Then there was also another bug with the code handling the return value of backlight_device_register. If this function ever failed, the driver would cleanup by calling the module_exit routine from module_init, but it would still return "success". So any attempt to rmmod this module would result in asus_acpi_exit being called twice but it's not ready to handle it (I haven't hit this bug, just found it by code inspection). This patch fixes that by inserting a return -ENODEV; at the end of this error handling path. Signed-off-by: Maxime Austruy <maxime@tralhalla.org> Cc: Len Brown <lenb@kernel.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2007, 19:29:44 UTC |
| d80d021 | Randy Dunlap | 01 July 2007, 19:06:37 UTC | pci.h stubs (for EDD build error) Provide stubs for more PCI bus/slot functions when CONFIG_PCI=n. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2007, 19:29:44 UTC |
| 10c86be | Randy Dunlap | 01 July 2007, 19:06:37 UTC | ALSA: more section mismatches Fix section mismatch warnings: WARNING: sound/built-in.o(.exit.text+0x3ad): Section mismatch: reference to .init.text: (between 'sb_exit' and 'unload_uart6850') WARNING: sound/built-in.o(.exit.text+0x753): Section mismatch: reference to .init.text: (between 'snd_mts64_module_exit' and 'snd_portman_module_exit') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2007, 19:29:44 UTC |
| 95203ae | Alexey Dobriyan | 01 July 2007, 19:06:36 UTC | frv: fix fallout from "remove sched.h from mm.h" patch /home/rpjday/AMD/k/topics/0_hi/hi1.c:15: error: dereferencing pointer to incomplete type /home/rpjday/AMD/k/topics/0_hi/hi1.c:16: error: dereferencing pointer to incomplete type Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2007, 19:29:44 UTC |
| 1702222 | Christoph Lameter | 01 July 2007, 19:06:35 UTC | SLAB: remove WARN_ON_ONCE for zero sized objects for 2.6.22 release We agreed to remove the WARN_ON_ONCE before 2.6.22 is released. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2007, 19:29:43 UTC |
| 0f4915b | Stephen Hemminger | 01 July 2007, 16:50:35 UTC | blink driver power saving The blink driver wakes up every jiffies which wastes power unnecessarily. Using a notifier gives same effect. Also add ability to unload module. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> [ We should really just delete the whole thing. The blink driver is broken in many other ways too -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2007, 18:08:39 UTC |
| 4710bcc | Linus Torvalds | 01 July 2007, 17:56:11 UTC | i386: remove bogus mtrr range check Commit 9215da33209b861b01c51382254b178a3fe92a30 "fixed" the MTRR range check to not allow any MTRR's under the 1MB mark (since that's where the fixed MTRR's are active). However, that was totally bogus, since it's normal (and almost required) to have a large variable MTRR that starts at 0, and covers some large percentage of the whole RAM, and then using the fixed MTRR's to override that large MTRR to handle the special ISA hole in the 640k-1M region. The old check was bogus too (checking that no variable MTRR is used that is entirely under the 1MB range), but at least it wasn't actively detrimental, because no sane situation would ever trigger such MTRR usage in the first place. That said, the whole notion of not allowing variable MTRR's in the low 1MB is just stupid, so rather than revert the commit, this just removes the whole sad and unnecessary check entirely. Cc: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Tested-by: Luca Palermo <darkmage@sabayonlinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2007, 17:56:11 UTC |
| abdba71 | Linus Torvalds | 30 June 2007, 04:30:18 UTC | Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Add linux/pagemap.h to asm/tlb.h [SPARC64]: Need to set state to IDLE during sun4v IRQ enable. [SPARC64]: Fix VIRQ enabling. [SPARC64]: Add irqs to mdesc_node. | 30 June 2007, 04:30:18 UTC |
| 2d408b4 | Linus Torvalds | 30 June 2007, 04:29:57 UTC | Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IRDA]: fix printk format [NETPOLL] netconsole: fix soft lockup when removing module [NETPOLL]: tx lock deadlock fix SCTP: lock_sock_nested in sctp_sock_migrate SCTP: Fix sctp_getsockopt_get_peer_addrs SCTP: update sctp_getsockopt helpers to allow oversized buffers | 30 June 2007, 04:29:57 UTC |
| fde937d | Will Schmidt | 29 June 2007, 20:49:50 UTC | Fix VDSO gettimeofday() when called with NULL struct timeval. The vdso64 portion of patch 74609f4536f2b8fd6a48381bbbe3cd37da20a527 for fixing problems with NULL gettimeofday input mistakenly checks for a null tz field twice, when it should be checking for null tz once, and null tv once; by way of a r10/r11 typo. Any application calling gettimeofday(&tv,NULL) will "fail". This corrects that typo, and makes my G5 happy. Tested on G5. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Cc: Tony Breeds <tony@bakeyournoodle.com> Forwarded-by: Ben Herrenschmidt <benh@kernel.crashing.org> [ Ben says: "I checked the 32 bits part of the change is correct. You can probably blame me for originally writing the 2 versions with inversed usage of r10 and r11, thus confusing Tony :-)" Ben duly blamed. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 30 June 2007, 04:27:00 UTC |
| fe77d4f | Stefan Richter | 25 June 2007, 20:18:40 UTC | firewire: add Kconfig help on building both stacks Alas that won't work so good, because nobody reads help texts. I thought about adding some crude multiple choice selection (build the old stack, build the new stack, build both stacks). It's possible, but it would introduce awkward dummy config variables. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> | 29 June 2007, 15:32:07 UTC |
| 0a9972b | Stefan Richter | 23 June 2007, 18:28:17 UTC | firewire: fix async reception on big endian machines descriptor.data_address is little endian Tested-by: Olaf Hering <olh@suse.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com> | 29 June 2007, 15:32:07 UTC |
| 5f02121 | Randy Dunlap | 29 June 2007, 05:40:23 UTC | [IRDA]: fix printk format Fix printk format warning: drivers/net/irda/irport.c:512: warning: format '%d' expects type 'int', but argument 5 has type 'long int' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 June 2007, 05:40:23 UTC |
| 8da32de | Kumar Gala | 29 June 2007, 05:12:04 UTC | gianfar: Fix typo bug introduced by move to udp_hdr() In commit 4bedb45203eab92a87b4c863fe2d0cded633427f both the udp and tcp cases where changed to use udp_hdr() instead of leaving the tcp case alone and fixing with tcp_hdr(). This ended up causing random behavior with TCP connections because of looking for tcp_hdr()->check in the wrong place. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | 29 June 2007, 05:12:04 UTC |
| 1720081 | Jarek Poplawski | 29 June 2007, 05:11:47 UTC | [NETPOLL] netconsole: fix soft lockup when removing module #1 Until kernel ver. 2.6.21 (including) cancel_rearming_delayed_work() required a work function should always (unconditionally) rearm with delay > 0 - otherwise it would endlessly loop. This patch replaces this function with cancel_delayed_work(). Later kernel versions don't require this, so here it's only for uniformity. #2 After deleting a timer in cancel_[rearming_]delayed_work() there could stay a last skb queued in npinfo->txq causing a memory leak after kfree(npinfo). Initial patch & testing by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jarek Poplawski <jarkao2@o2.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 June 2007, 05:11:47 UTC |
| 9f462a1 | Alexey Dobriyan | 29 June 2007, 04:25:31 UTC | [SPARC64]: Add linux/pagemap.h to asm/tlb.h As seen on sparc64-allnoconfig: CC arch/sparc64/mm/tlb.o In file included from arch/sparc64/mm/tlb.c:19: include/asm/tlb.h: In function 'tlb_flush_mmu': include/asm/tlb.h:60: warning: implicit declaration of function 'release_pages' include/asm/tlb.h: In function 'tlb_remove_page': include/asm/tlb.h:92: warning: implicit declaration of function 'page_cache_release' Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 June 2007, 04:25:31 UTC |
| 2524363 | David S. Miller | 29 June 2007, 04:21:43 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/vxy/lksctp-dev | 29 June 2007, 04:21:43 UTC |
| 0471448 | Linus Torvalds | 28 June 2007, 18:45:12 UTC | Merge branch 'for_linus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc * 'for_linus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: phy: Fix phy_id for Vitesse 824x PHY | 28 June 2007, 18:45:12 UTC |
| edd5cd4 | David Woodhouse | 27 June 2007, 21:10:09 UTC | Introduce fixed sys_sync_file_range2() syscall, implement on PowerPC and ARM Not all the world is an i386. Many architectures need 64-bit arguments to be aligned in suitable pairs of registers, and the original sys_sync_file_range(int, loff_t, loff_t, int) was therefore wasting an argument register for padding after the first integer. Since we don't normally have more than 6 arguments for system calls, that left no room for the final argument on some architectures. Fix this by introducing sys_sync_file_range2(int, int, loff_t, loff_t) which all fits nicely. In fact, ARM already had that, but called it sys_arm_sync_file_range. Move it to fs/sync.c and rename it, then implement the needed compatibility routine. And stop the missing syscall check from bitching about the absence of sys_sync_file_range() if we've implemented sys_sync_file_range2() instead. Tested on PPC32 and with 32-bit and 64-bit userspace on PPC64. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:38:30 UTC |
| 2f4d4da | Jay Lubomirski | 27 June 2007, 21:10:09 UTC | serial: clear proper MPSC interrupt cause bits The interrupt clearing code in mpsc_sdma_intr_ack() mistakenly clears the interrupt for both controllers instead of just the one its supposed to. This can result in the other controller appearing to hang because its interrupt was effectively lost. So, don't clear the interrupt cause bits for both MPSC controllers when clearing the interrupt for one of them. Just clear the one that is supposed to be cleared. Signed-off-by: Jay Lubomirski <jaylubo@motorola.com> Acked-by: Mark A. Greer <mgreer@mvista.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:38:29 UTC |
| ddc80bd | Andrew Morton | 27 June 2007, 21:10:08 UTC | ext2: fix return of uninitialised variable gcc correctly says fs/ext2/super.c: In function 'ext2_remount': fs/ext2/super.c:1055: warning: 'err' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:38:29 UTC |
| 5da44ad | Alexey Dobriyan | 27 June 2007, 21:10:06 UTC | mips-jazz: correct flags for timer io resource arch/mips/jazz/setup.c:55:4: error: Initializer entry defined twice Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:38:19 UTC |
| 33e44b1 | Evgeniy Polyakov | 27 June 2007, 21:10:04 UTC | w1_therm_read_bin: don't call flush_signals() This can disrupt userspace signal management. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:38:19 UTC |
| a66e356 | Masami Hiramatsu | 27 June 2007, 21:10:04 UTC | relayfs: fix overwrites When I use relayfs with "overwrite" mode, read() still sets incorrect number of consumed bytes. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Tom Zanussi <zanussi@us.ibm.com> Acked-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:38:18 UTC |
| 8d62fde | David Wilder | 27 June 2007, 21:10:03 UTC | relay file read: start-pos fix Fix a bug in the relay read interface causing the number of consumed bytes to be set incorrectly. Signed-off-by: Tom Zanussi <zanussi@us.ibm.com> Signed-off-by: David Wilder <dwilder@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:54 UTC |
| ea7fc33 | Randy Dunlap | 27 June 2007, 21:10:02 UTC | ALSA: use __devexit_p Change __devexit to __devexit_p: sound/isa/opl3sa2.c:956: error: expected expression before '__attribute__' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:54 UTC |
| 8a465c3 | Stefan Richter | 27 June 2007, 21:10:01 UTC | Documentation/HOWTO: update URLs of git trees Also, remove outdated 1394 tree and mention MAINTAINERS as pointer to development trees. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:54 UTC |
| 74bfe03 | Olaf Hering | 27 June 2007, 21:10:00 UTC | fix section mismatch in chipsfb WARNING: drivers/built-in.o(.text+0x8742a): Section mismatch: reference to .init.data:chipsfb_fix (between 'chipsfb_pci_init' and 'chipsfb_set_par') WARNING: drivers/built-in.o(.text+0x87432): Section mismatch: reference to .init.data:chipsfb_fix (between 'chipsfb_pci_init' and 'chipsfb_set_par') WARNING: drivers/built-in.o(.text+0x87442): Section mismatch: reference to .init.data:chipsfb_var (between 'chipsfb_pci_init' and 'chipsfb_set_par') WARNING: drivers/built-in.o(.text+0x8744a): Section mismatch: reference to .init.data:chipsfb_var (between 'chipsfb_pci_init' and 'chipsfb_set_par') init_chips is only called from chipsfb_pci_init chipsfb_fix and chipsfb_var are only referenced from init_chips Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:54 UTC |
| f8738c5 | Davide Libenzi | 27 June 2007, 21:09:59 UTC | avoid spurious POLLIN returns in signalfd The new code in kernel/signal.c does not allow fetching private signals from another task. This patch avoid spurious POLLIN returns from a signalfd poll(2) operation. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:54 UTC |
| 58e7847 | Jeff Mahoney | 27 June 2007, 21:09:58 UTC | saa7134: fix thread shutdown handling This patch changes the test for the thread pid from >= 0 to > 0. When the saa8134 driver initialization fails after a certain point, it goes through the complete shutdown process for the driver. Part of shutting it down includes tearing down the thread for tv audio. The test for tearing down the thread tests for >= 0. Since the dev structure is kzalloc'd, the test will always be true if we haven't tried to start the thread yet. We end up waiting on pid 0 to complete, which will never happen, so we lock up. This bug was observed in Novell Bugzilla 284718, when request_irq() failed. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:54 UTC |
| 53f3bed | Randy Dunlap | 27 June 2007, 21:09:57 UTC | ALSA: fix ice1712 section mismatch Cannot mix const and __initdata: sound/pci/ice1712/prodigy192.c:708: error: ak4114_controls causes a section type conflict Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:53 UTC |
| 92504f7 | Randy Dunlap | 27 June 2007, 21:09:56 UTC | IOATDMA: fix section mismatches Rename struct pci_driver data so that false section mismatch warnings won't be produced. Sam, ISTM that depending on variable names is the weakest & worst part of modpost section checking. Should __init_refok work here? I got build errors when I tried to use it, probably because the struct pci_driver probe and remove methods are not marked "__init_refok". WARNING: drivers/dma/ioatdma.o(.data+0x10): Section mismatch: reference to .init.text: (between 'ioat_pci_drv' and 'ioat_pci_tbl') WARNING: drivers/dma/ioatdma.o(.data+0x14): Section mismatch: reference to .exit.text: (between 'ioat_pci_drv' and 'ioat_pci_tbl') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Chris Leech <christopher.leech@intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:53 UTC |
| 59faba1 | Trent Piepho | 27 June 2007, 21:09:54 UTC | Fix Kconfig dependency problems wrt boolean menuconfigs If one has a dependency chain (tristate)FOO depends on (bool)BAR depends on (tristate)BAZ, build problems will result. If BAZ=m, then BAR can be set y, which allows FOO=y. It's possible to have FOO=y && BAZ=m, which wouldn't be allowed if FOO depended directly on BAZ. In effect, the bool promotes the tristate from m to y. This ends up causing a problem with several menuconfigs that look like: menuconfig BAR bool depends on BAZ [tristate] if BAR config FOO tristate endif The solution used here is to add the dependencies of BAR to the if statement, so that items in the if block will gain a direct non-bool-promoted dependency on BAZ. This is how it would work if a menu was used instead of an if block. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:53 UTC |
| 30acbab | Hugh Dickins | 27 June 2007, 21:09:53 UTC | mm: kill validate_anon_vma to avoid mapcount BUG validate_anon_vma gave a useful check on the integrity of the anon_vma list when Andrea was developing obj rmap; but it was not enabled in SLES9 itself, nor in mainline, until Nick changed commented-out RMAP_DEBUG to configurable CONFIG_DEBUG_VM in 2.6.17. Now Petr Vandrovec reports that its BUG_ON(mapcount > 100000) can easily crash a CONFIG_DEBUG_VM=y system. That limit was just an arbitrary number to protect against an infinite loop. We could raise it to something enormous (depending on sizeof struct vma and size of memory?); but I rather think validate_anon_vma has outlived its usefulness, and is better just removed - which gives a magnificent performance boost to anything like Petr's test program ;) Of course, a very long anon_vma list is bad news for preemption latency, and I believe there has been one recent report of such: let's not forget that, but validate_anon_vma only makes it worse not better. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Petr Vandrovec <petr@vmware.com> Acked-by: Nick Piggin <npiggin@suse.de> Cc: Andrea Arcangeli <andrea@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:53 UTC |
| 172d049 | Bjorn Helgaas | 27 June 2007, 21:09:52 UTC | PNP SMCf010 quirk: auto-config device if BIOS left it broken Some HP firmware leaves the SMCf010 IRDA device incompletely configured, or reports the wrong resources in _CRS. As a workaround, when we find such a device, try to auto-configure the device. This ignores the _CRS data, picks a config from _PRS, and runs _SRS to configure the device. This makes smsc-ircc2 work correctly with PNP resources (with no preconfiguration!) on all the machines I tested. I think Windows does something like this by default for all devices, so we should consider doing the same thing in Linux. This patch addresses part of the 2.6.22 regression: "no irda0 interface (2.6.21 was OK), smsc does not find chip" It fixes smsc-ircc2 PNP device detection on HP nc6000, nc6220, nw8000, nw8240, and possibly other machines. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:53 UTC |
| 7c31d2f | Bjorn Helgaas | 27 June 2007, 21:09:50 UTC | smsc-ircc2: skip preconfiguration for PNP devices If we rely on the device resources from PNPBIOS, we also have to rely on the BIOS to configure any bridges on the way to the device. Using the PNPBIOS resources but changing the configuration of a bridge behind the back of the firmware is likely to make things inconsistent. This patch addresses part of the 2.6.22 regression: "no irda0 interface (2.6.21 was OK), smsc does not find chip" It fixes smsc-ircc2 PNP device detection on HP nx5000 laptops. Other laptops, including HP nc6000, HP nc8000, HP nw8000, and Toshiba Portege 4000, still need PNP quirks to make this work. With "smsc-ircc2.nopnp", we do the legacy device probe, including manual bridge preconfiguration, as before. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Samuel Ortiz <samuel@sortiz.org> Acked-by: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:53 UTC |
| 80581c4 | Randy Dunlap | 27 June 2007, 21:09:49 UTC | mtrr/cyrix: fix sections main.c::mtrr_add() or mtrr_del() [exported] calls main.c::mtrr_add_page() or mtrr_del_page() or mtrr_restore() [resume] calls main.c::set_mtrr() calls main.c::ipi_handler() calls main.c::mtrr_if->set_all() == which can be cyrix_set_all WARNING: arch/i386/kernel/built-in.o(.text+0x8657): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region') WARNING: arch/i386/kernel/built-in.o(.text+0x866b): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region') WARNING: arch/i386/kernel/built-in.o(.text+0x867e): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region') WARNING: arch/i386/kernel/built-in.o(.text+0x8684): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region') WARNING: arch/i386/kernel/built-in.o(.text+0x868a): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:53 UTC |
| d2fd899 | Randy Dunlap | 27 June 2007, 21:09:48 UTC | eventfd: clean compile when CONFIG_EVENTFD=n Fix gcc warning and add parameter checking when CONFIG_EVENTFD=n: fs/aio.c: In function 'aio_complete': fs/aio.c:955: warning: statement with no effect Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:53 UTC |
| c0887ee | Ville Syrjala | 27 June 2007, 21:09:46 UTC | atyfb: Fix XCLK frequency on Apple iBook1 Fix a regression on Apple iBook1. Changes in the clock init code caused an incorrect XCLK frequency to be used leading to a corrupted display. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Cc: Olaf Hering <olaf@aepfle.de> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:53 UTC |
| d4c5cdb | Michael Halcrow | 27 June 2007, 21:09:45 UTC | zero out last page for llseek/write When one llseek's past the end of the file and then writes, every page past the previous end of the file should be cleared. Trevor found that the code, as is, does not assure that the very last page is always cleared. This patch takes care of that. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:53 UTC |
| e10f281 | Michael Halcrow | 27 June 2007, 21:09:44 UTC | eCryptfs: initialize crypt_stat in setattr Recent changes in eCryptfs have made it possible to get to ecryptfs_setattr() with an uninitialized crypt_stat struct. This results in a wide and colorful variety of unpleasantries. This patch properly initializes the crypt_stat structure in ecryptfs_setattr() when it is necessary to do so. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:53 UTC |
| 240e2df | Michael Halcrow | 27 June 2007, 21:09:44 UTC | eCryptfs: fix write zeros behavior This patch fixes the processes involved in wiping regions of the data during truncate and write events, fixing a kernel hang in 2.6.22-rc4 while assuring that zero values are written out to the appropriate locations during events in which the i_size will change. The range passed to ecryptfs_truncate() from ecryptfs_prepare_write() includes the page that is the object of ecryptfs_prepare_write(). This leads to a kernel hang as read_cache_page() is executed on the same page in the ecryptfs_truncate() execution path. This patch remedies this by limiting the range passed to ecryptfs_truncate() so as to exclude the page that is the object of ecryptfs_prepare_write(); it also adds code to ecryptfs_prepare_write() to zero out the region of its own page when writing past the i_size position. This patch also modifies ecryptfs_truncate() so that when a file is truncated to a smaller size, eCryptfs will zero out the contents of the new last page from the new size through to the end of the last page. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 June 2007, 18:34:53 UTC |
| 5f708dd | Kumar Gala | 28 June 2007, 18:26:06 UTC | phy: Fix phy_id for Vitesse 824x PHY The phy_id specified for the Vitesse 824x PHY would never match because it was expecting bits to be set that would be masked by the phy_id_mask. Fix the phy_id so it will match properly, and changed the mdio_bus_match to mask both the driver and devices phy_id with the mask so we dont have this issue in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | 28 June 2007, 18:26:06 UTC |
| 7dcf528 | Dan Williams | 18 June 2007, 16:10:33 UTC | [PATCH] libertas: remove private ioctls Signed-off-by: Christoph Hellwig <hch@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 28 June 2007, 11:48:47 UTC |
| 18c96c3 | Dan Williams | 18 June 2007, 16:01:12 UTC | [PATCH] libertas: fix WPA associations by handling ENABLE_RSN correctly Don't clobber the firmware's internal state machine by setting ENABLE_RSN more than once during the 4-way handshake. Check what the ENABLE_RSN status is and only set if it should be changed. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 28 June 2007, 11:48:47 UTC |
| f8f5510 | Dan Williams | 30 May 2007, 14:12:55 UTC | [PATCH] libertas: kill wlan_scan_process_results Fold into wlan_scan_networks() and protect with debug defines. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 28 June 2007, 11:48:47 UTC |
| b59bb61 | Dan Williams | 18 June 2007, 15:50:43 UTC | [PATCH] libertas: style fixes Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 28 June 2007, 11:48:46 UTC |
| b75ae86 | Linus Torvalds | 27 June 2007, 17:04:02 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Make SN2 PCI code use ioremap rather than manually mangle the address [IA64] Force error to surface in nofault code [IA64] change sh_change_coherence oemcall to use nolock [IA64] remove duplicate header include line [IA64] Correct unwind validation code [IA64] is_power_of_2-ia64/mm/hugetlbpage.c | 27 June 2007, 17:04:02 UTC |
| 75ca0d2 | Linus Torvalds | 27 June 2007, 17:00:23 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: kill ATA_HORKAGE_DMA_RW_ONLY libata: use PIO for non-16 byte aligned ATAPI commands libata: call ata_check_atapi_dma() with qc better prepared libata: fix infinite EH waiting bug libata: fix ata_dev_disable() pata_it821x: fix section mismatch warning libata: remove unused variable from ata_eh_reset() libata: be less verbose about hpa libata: kill non-sense warning message libata: kill the infamous abnormal status message HPT374 is UDMA100 not UDMA133 | 27 June 2007, 17:00:23 UTC |
| 7af5f53 | Linus Torvalds | 27 June 2007, 16:59:52 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: 2.6.22: ERROR: "__ucmpdi2" [drivers/net/s2io.ko] undefined! cxgb3 - fix register to stop bc/mc traffic au1000_eth: Fix warnings. | 27 June 2007, 16:59:52 UTC |
| 67a32be | Stephen Hemminger | 27 June 2007, 02:03:04 UTC | remove leftover documentation of acpi_generic_hotkey This looks like leftover text in the kernel parameter in documentation. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 27 June 2007, 16:55:34 UTC |
| ad5c980 | Ian Romanick | 26 June 2007, 20:38:00 UTC | Add support SiS based XGI chips to SiS DRM. This adds support for some of the XGI Volari family that are based on the SiS. Signed-off-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 27 June 2007, 16:54:49 UTC |
| 0db3dc7 | Stephen Hemminger | 27 June 2007, 07:39:42 UTC | [NETPOLL]: tx lock deadlock fix If sky2 device poll routine is called from netpoll_send_skb, it would deadlock. The netpoll_send_skb held the netif_tx_lock, and the poll routine could acquire it to clean up skb's. Other drivers might use same locking model. The driver is correct, netpoll should not introduce more locking problems than it causes already. So change the code to drop lock before calling poll handler. Signed-off-by: Stephen Hemminger <shemminger@linux.foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 June 2007, 07:39:42 UTC |
| 40a1d53 | Tejun Heo | 26 June 2007, 17:49:38 UTC | libata: kill ATA_HORKAGE_DMA_RW_ONLY ATA_HORKAGE_DMA_RW_ONLY for TORiSAN is verified to be subset of using DMA for ATAPI commands which aren't aligned to 16 bytes. As libata now doesn't use DMA for unaligned ATAPI commands, the horkage is redundant. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 June 2007, 06:50:08 UTC |
| b9a4197 | Tejun Heo | 26 June 2007, 17:48:43 UTC | libata: use PIO for non-16 byte aligned ATAPI commands The IDE driver used DMA for ATAPI commands if READ/WRITE command is multiple of sector size or sg command is multiple of 16 bytes. For libata, READ/WRITE sector alignment is guaranteed by the high level driver (sr), so we only have to worry about the 16 byte alignment. This patch makes ata_check_atapi_dma() always request PIO for all data transfer commands which are not multiple of 16 bytes. The following reports are related to this problem. http://bugzilla.kernel.org/show_bug.cgi?id=8605 (confirmed) http://thread.gmane.org/gmane.linux.kernel/476620 (confirmed) https://bugzilla.novell.com/show_bug.cgi?id=229260 (probably) Albert first pointed out the difference between IDE and libata. Kudos to him. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 June 2007, 06:50:08 UTC |
