Revision 78780aab93f9ec398f9b59106b4f9d065c70e595 authored by jellewestenberger on 09 August 2020, 12:55:05 UTC, committed by jellewestenberger on 09 August 2020, 12:55:05 UTC
1 parent 9091c1f
Makefile.ac
# Hey Emacs, this is a -*- makefile -*-
#
# Copyright (C) 2003-2014 The Paparazzi Team
#
# This file is part of paparazzi.
#
# paparazzi is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# paparazzi is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with paparazzi; see the file COPYING. If not, write to
# the Free Software Foundation, 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.
# Preprocessing of XML configuration files
PAPARAZZI_SRC ?= $(shell pwd)
include conf/Makefile.local
# main directory where the generated files and compilation results for an aircraft are stored
AIRCRAFT_BUILD_DIR = $(PAPARAZZI_HOME)/var/aircrafts/$(AIRCRAFT)
CONF=$(PAPARAZZI_HOME)/conf
VAR=$(PAPARAZZI_HOME)/var
CONF_XML ?= $(CONF)/conf.xml
AIRBORNE=sw/airborne
MESSAGES_XML = $(VAR)/messages.xml
# make sure the TARGET variable is set if needed for current make target
ifneq (,$(findstring $(MAKECMDGOALS),all_ac_h radio_ac_h flight_plan_ac_h))
ifeq ($(TARGET),)
$(warning No TARGET specified! Defaulting to "TARGET=ap")
override TARGET=ap
endif
endif
# Enable QT
PAPARAZZI_QT_GEN?=
ifneq (,$(findstring qt,$(MAKECMDGOALS)))
PAPARAZZI_QT_GEN=1
endif
AIRCRAFT_CONF_DIR = $(AIRCRAFT_BUILD_DIR)/conf
AC_GENERATED = $(AIRCRAFT_BUILD_DIR)/$(TARGET)/generated
AIRFRAME_H=$(AC_GENERATED)/airframe.h
PERIODIC_H=$(AC_GENERATED)/periodic_telemetry.h
RADIO_H=$(AC_GENERATED)/radio.h
FLIGHT_PLAN_H=$(AC_GENERATED)/flight_plan.h
FLIGHT_PLAN_XML=$(AIRCRAFT_BUILD_DIR)/flight_plan.xml
SRCS_LIST=$(AIRCRAFT_BUILD_DIR)/$(TARGET)_srcs.list
TMP_LIST=$(AIRCRAFT_BUILD_DIR)/$(TARGET)_tmp.list
SETTINGS_H=$(AC_GENERATED)/settings.h
SETTINGS_XMLS=$(patsubst %,$(CONF)/%,$(SETTINGS))
SETTINGS_XMLS_DEP=$(filter-out %~,$(SETTINGS_XMLS))
SETTINGS_XML=$(AIRCRAFT_BUILD_DIR)/settings.xml
SETTINGS_MODULES=$(AIRCRAFT_BUILD_DIR)/settings_modules.xml
SETTINGS_TELEMETRY=$(AIRCRAFT_BUILD_DIR)/settings_telemetry.xml
SETTINGS_AUTOPILOT=$(AIRCRAFT_BUILD_DIR)/settings_autopilot.xml
SETTINGS_FLIGHTPLAN=$(AIRCRAFT_BUILD_DIR)/settings_flightplan.xml
MAKEFILE_AC=$(AIRCRAFT_BUILD_DIR)/Makefile.ac
MODULES_H=$(AC_GENERATED)/modules.h
MODULES_DIR=$(PAPARAZZI_HOME)/conf/modules/
AUTOPILOT_DIR=$(AC_GENERATED)/
AIRCRAFT_MD5=$(AIRCRAFT_CONF_DIR)/aircraft.md5
GENERATE_KEYS ?= 0
UNAME = $(shell uname -s)
ifeq ("$(UNAME)","Darwin")
MKTEMP = gmktemp
else
MKTEMP = mktemp
endif
# By default, detect number of processors for parallel compilation
# same as passing J=AUTO from toplevel make.
# Number of processes can also be explicitly set with e.g. J=4
# For serial compilation, call make with J=1
NPROCS := 1
J ?= AUTO
ifeq ($J,AUTO)
ifeq ($(UNAME),Linux)
NPROCS := $(shell grep -c ^processor /proc/cpuinfo)
else ifeq ($(UNAME),Darwin)
NPROCS := $(shell sysctl hw.ncpu | awk '{print $$2}')
endif # $(UNAME)
else # not auto, explicitly specified
NPROCS := $J
endif
#
# export paparazzi version
#
GIT_SHA1 := $(shell git log -1 --pretty=format:%H 2> /dev/null)
ifneq ($(words $(GIT_SHA1)),1)
GIT_SHA1 := "UNKNOWN"
endif
GIT_DESC := $(shell ./paparazzi_version)
BUILD_DESC := $(shell cat $(PAPARAZZI_HOME)/var/build_version.txt 2> /dev/null || echo UNKNOWN)
# extract only version number in format <major>.<minor>.<patch>
PPRZ_VER := $(shell echo $(GIT_DESC) | sed 's/[^0-9.]*\([0-9.]*\).*/\1/')
PPRZ_VER_MAJOR := $(shell echo $(GIT_DESC) | sed 's/v\([0-9]*\).*/\1/')
PPRZ_VER_MINOR := $(shell echo $(GIT_DESC) | sed 's/v[0-9]*.\([0-9]*\).*/\1/')
PPRZ_VER_PATCH := $(shell echo $(GIT_DESC) | sed 's/v[0-9]*.[0-9]*.\([0-9]*\).*/\1/')
ifneq ($(words $(PPRZ_VER_PATCH)),1)
PPRZ_VER_PATCH := 0
endif
export GIT_DESC
export BUILD_DESC
export GIT_SHA1
export PPRZ_VER_MAJOR
export PPRZ_VER_MINOR
export PPRZ_VER_PATCH
# show warning with print_version if PPRZ_VER (e.g. 5.3.2) is not part of the BUILD_DESC string
VERSION_MATCH = ""
ifeq (,$(findstring $(PPRZ_VER),$(BUILD_DESC)))
VERSION_MATCH = "\nWarning: version differs from build version ($(BUILD_DESC)), you might want to run the toplevel make."
endif
# "make Q=''" to get full echo
Q=@
#
# include the generated airframe makefile
#
ifeq ($(MAKECMDGOALS),all_ac_h)
-include $(AIRBORNE)/Makefile
ifdef PERIODIC_FREQUENCY
# telemetry and module periodic frequency default to PERIODIC_FREQUENCY
TELEMETRY_FREQUENCY ?= $(PERIODIC_FREQUENCY)
DEFAULT_MODULES_FREQUENCY = $(PERIODIC_FREQUENCY)
else
$(warning Info: PERIODIC_FREQUENCY not configured, defaulting to 60Hz for modules and telemetry)
TELEMETRY_FREQUENCY ?= 60
DEFAULT_MODULES_FREQUENCY = 60
endif
endif
print_version:
@echo "-----------------------------------------------------------------------"
@echo "Paparazzi version" $(GIT_DESC)$(VERSION_MATCH)
@echo "-----------------------------------------------------------------------"
all_ac_h: $(SRCS_LIST) qt_project generate_keys build_rust_modules
$(SRCS_LIST) : $(CONF_XML) $(AIRFRAME_H) $(MODULES_H) $(SETTINGS_H) $(MAKEFILE_AC) $(PERIODIC_H)
@echo "TARGET: " $(TARGET) > $(SRCS_LIST)
@echo "CFLAGS: " $(CFLAGS) $(IINCDIR) $(TOPT) >> $(SRCS_LIST)
@echo "LDFLAGS: " $($(TARGET).LDFLAGS) >> $(SRCS_LIST)
@echo "srcs: " $($(TARGET).srcs) >> $(SRCS_LIST)
@echo -n "headers: " >> $(SRCS_LIST)
ifneq ($(PAPARAZZI_QT_GEN),)
@echo $(VPATH) > $(TMP_LIST)
@echo $($(TARGET).srcs) >> $(TMP_LIST)
ifeq (,$(findstring cpp,$($(TARGET).srcs)))
@echo $(CFLAGS) >> $(TMP_LIST)
@echo $(IINCDIR) >> $(TMP_LIST)
@echo $(TOPT)>> $(TMP_LIST)
@echo ../../sw/tools/find_vpaths.py $(CC) $(TMP_LIST) $(PAPARAZZI_SRC)
$(Q)cd $(PAPARAZZI_SRC) ; ./sw/tools/find_vpaths.py $(CC) $(TMP_LIST) $(PAPARAZZI_SRC) >> $(SRCS_LIST)
else
@echo $(CXXFLAGS) >> $(TMP_LIST)
@echo $(IINCDIR) >> $(TMP_LIST)
@echo $(TOPT)>> $(TMP_LIST)
@echo ../../sw/tools/find_vpaths.py $(CXX) $(TMP_LIST) $(PAPARAZZI_SRC)
$(Q)cd $(PAPARAZZI_SRC) ; ./sw/tools/find_vpaths.py $(CXX) $(TMP_LIST) $(PAPARAZZI_SRC) >> $(SRCS_LIST)
endif
endif
CARGO=$(shell which cargo)
# guard for simulation (NPS) target
ifneq (,$(findstring thumb, $(RUST_ARCH)))
# thumbv6 or 7
RUST_FEATURES+="not_std"
else
# using host architecture
RUST_FEATURES+="use_std"
endif
build_rust_modules:
ifneq ($(strip $(RUST_MODULES)),)
ifneq ($(CARGO),)
ifneq ($(RUST_ARCH),)
@echo PROCESSING RUST MODULES
@echo $(RUST_MODULES)
@echo RUST_FEATURES = $(RUST_FEATURES)
@$(foreach module_path, $(RUST_MODULES),\
echo Building $(module_path);\
cd $(module_path) && \
AC_GENERATED=$(AC_GENERATED) cargo build --target $(RUST_ARCH) --verbose --release --features $(RUST_FEATURES);)
else
@echo "Error: RUST_ARCH not specified, this board is likely not supported."
endif # Check Rust Arch
else
@echo "Error: Cargo (Rust) not found, cannot build Rust modules. Please install xargo."
endif # Check if Cargo is present
endif # No rust modules to process
generate_keys:
ifeq ($(GENERATE_KEYS),1)
ifneq ($(CARGO),)
@echo GENERATE KEYS
$(Q)cargo run --manifest-path $(PAPARAZZI_SRC)/sw/ext/key_generator/Cargo.toml --release $(AC_GENERATED)
else
@echo "Error: Cargo (Rust) is not found, keys are not generated. Please install cargo."
endif
endif
qt_project : $(SRCS_LIST)
ifneq ($(PAPARAZZI_QT_GEN),)
$(Q)./sw/tools/qt_project.py $(AIRCRAFT) $(CONF_XML) $(SRCS_LIST)
endif
radio_ac_h : $(RADIO_H)
flight_plan_ac_h : $(FLIGHT_PLAN_H) $(FLIGHT_PLAN_XML)
makefile_ac: $(MAKEFILE_AC)
$(AIRFRAME_H) : $(CONF)/$(AIRFRAME_XML) $(CONF_XML) $(AIRCRAFT_MD5) $(GENERATORS)/gen_airframe.out $(GENERATORS)/gen_autopilot.out $(CONF)/autopilot/*.xml
$(Q)test -d $(AC_GENERATED) || mkdir -p $(AC_GENERATED)
@echo GENERATE $@ from $(AIRFRAME_XML)
$(eval $@_TMP := $(shell $(MKTEMP)))
$(Q)$(GENERATORS)/gen_airframe.out $(AC_ID) $(AIRCRAFT) $(MD5SUM) $< > $($@_TMP)
$(Q)mv $($@_TMP) $@
$(Q)chmod a+r $@
$(Q)cp $(CONF)/airframes/airframe.dtd $(AIRCRAFT_CONF_DIR)/airframes
@echo GENERATE autopilots in $(AUTOPILOT_DIR)
$(Q)$(GENERATORS)/gen_autopilot.out $(CONF)/$(AIRFRAME_XML) $(AUTOPILOT_DIR) $(SETTINGS_AUTOPILOT)
$(RADIO_H) : $(CONF)/$(RADIO) $(CONF_XML) $(GENERATORS)/gen_radio.out
$(Q)test -d $(AC_GENERATED) || mkdir -p $(AC_GENERATED)
@echo GENERATE $@ from $(RADIO)
$(eval $@_TMP := $(shell $(MKTEMP)))
$(Q)$(GENERATORS)/gen_radio.out $< > $($@_TMP)
$(Q)mv $($@_TMP) $@
$(Q)chmod a+r $@
$(Q)cp $< $(AIRCRAFT_CONF_DIR)/radios
$(PERIODIC_H) : $(MESSAGES_XML) $(CONF_XML) $(CONF)/$(TELEMETRY) $(MAKEFILE_AC)
$(Q)test -d $(AC_GENERATED) || mkdir -p $(AC_GENERATED)
@echo GENERATE $@ from $(TELEMETRY)
$(eval $@_TMP := $(shell $(MKTEMP)))
$(Q)$(GENERATORS)/gen_periodic.out $(MESSAGES_XML) $(CONF)/$(TELEMETRY) $(TELEMETRY_FREQUENCY) $(SETTINGS_TELEMETRY) > $($@_TMP)
$(Q)mv $($@_TMP) $@
$(Q)chmod a+r $@
$(Q)cp $(CONF)/$(TELEMETRY) $(AIRCRAFT_CONF_DIR)/telemetry
$(FLIGHT_PLAN_H) : $(CONF)/$(FLIGHT_PLAN) $(CONF_XML) $(GENERATORS)/gen_flight_plan.out
$(Q)test -d $(AC_GENERATED) || mkdir -p $(AC_GENERATED)
@echo GENERATE $@ from $(FLIGHT_PLAN)
$(eval $@_TMP := $(shell $(MKTEMP)))
$(Q)$(GENERATORS)/gen_flight_plan.out -settings $(SETTINGS_FLIGHTPLAN) $< > $($@_TMP)
$(Q)mv $($@_TMP) $@
$(Q)chmod a+r $@
$(Q)cp $< $(AIRCRAFT_CONF_DIR)/flight_plans
$(FLIGHT_PLAN_XML) : $(CONF)/$(FLIGHT_PLAN) $(CONF_XML) $(GENERATORS)/gen_flight_plan.out
@echo GENERATE $@ from $(FLIGHT_PLAN)
$(eval $@_TMP := $(shell $(MKTEMP)))
$(Q)$(GENERATORS)/gen_flight_plan.out -dump $< > $($@_TMP)
$(Q)mv $($@_TMP) $@
$(Q)chmod a+r $@
# split system settings (generated) from user settings with a '--'
$(SETTINGS_H) : $(SETTINGS_XMLS_DEP) $(CONF_XML) $(SETTINGS_MODULES) $(SETTINGS_TELEMETRY) $(SETTINGS_AUTOPILOT) $(GENERATORS)/gen_settings.out
$(Q)test -d $(AC_GENERATED) || mkdir -p $(AC_GENERATED)
@echo GENERATE $@
$(eval $@_TMP := $(shell $(MKTEMP)))
$(Q)$(GENERATORS)/gen_settings.out $(SETTINGS_XML) $(SETTINGS_AUTOPILOT) $(SETTINGS_TELEMETRY) $(SETTINGS_FLIGHTPLAN) $(SETTINGS_MODULES) -- $(SETTINGS_XMLS) > $($@_TMP)
$(Q)mv $($@_TMP) $@
$(Q)chmod a+r $@
$(Q)cp $(SETTINGS_XMLS_DEP) $(AIRCRAFT_CONF_DIR)/settings
$(MODULES_H) : $(CONF)/$(AIRFRAME_XML) $(FLIGHT_PLAN_XML) $(GENERATORS)/gen_modules.out $(CONF)/modules/*.xml
$(Q)test -d $(AC_GENERATED) || mkdir -p $(AC_GENERATED)
@echo GENERATE $@
$(eval $@_TMP := $(shell $(MKTEMP)))
$(Q)$(GENERATORS)/gen_modules.out $(AC_ID) $(SETTINGS_MODULES) $(DEFAULT_MODULES_FREQUENCY) $(FLIGHT_PLAN_XML) $< > $($@_TMP)
$(Q)mv $($@_TMP) $@
$(Q)chmod a+r $@
$(SETTINGS_MODULES) : $(MODULES_H)
$(SETTINGS_TELEMETRY) : $(PERIODIC_H)
$(SETTINGS_FLIGHTPLAN) : $(FLIGHT_PLAN_H)
%.ac_h : $(GENERATORS)/gen_aircraft.out
$(Q)if (expr "$(AIRCRAFT)") > /dev/null; then : ; else echo "AIRCRAFT undefined: type 'make AIRCRAFT=AircraftName ...'"; exit 1; fi
@echo "#######################################"
@echo "# BUILD AIRCRAFT=$(AIRCRAFT), TARGET $*"
@echo "#######################################"
$(Q)PAPARAZZI_SRC=$(PAPARAZZI_SRC) PAPARAZZI_HOME=$(PAPARAZZI_HOME) PAPARAZZI_QT_GEN=$(PAPARAZZI_QT_GEN) TARGET=$* Q=$(Q) $(GENERATORS)/gen_aircraft.out $(AIRCRAFT) $(CONF_XML)
%.qt: %.ac_h
@echo "GENERATED Qt project"
%.compile: %.ac_h | print_version
cd $(AIRBORNE); $(MAKE) -j$(NPROCS) TARGET=$* all
%.upload: %.compile
cd $(AIRBORNE); $(MAKE) TARGET=$* upload
sim sim.compile: sim.ac_h | print_version
cd $(AIRBORNE); $(MAKE) -j$(NPROCS) TARGET=sim ARCHI=sim ARCH=sim all
# Rules for backward compatibility (old guys are used to !)
fbw : fbw.compile
ap: ap.compile
clean_ac :
$(Q)if (expr "$(AIRCRAFT)") > /dev/null; then : ; else echo "AIRCRAFT undefined: type 'make AIRCRAFT=AircraftName ...'"; exit 1; fi
@echo "CLEANING $(AIRCRAFT)"
$(Q)rm -fr $(AIRCRAFT_BUILD_DIR)
.PHONY: all_ac_h radio_ac_h flight_plan_ac_h makefile_ac clean_ac print_version generate_keys
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...