Revision 7b6efc2bc4f19952b25ebf9b236e5ac43cd386c2 authored by Andrea Arcangeli on 01 November 2011, 00:08:26 UTC, committed by Linus Torvalds on 01 November 2011, 00:30:48 UTC
This replaces ptep_clear_flush() with ptep_get_and_clear() and a single
flush_tlb_range() at the end of the loop, to avoid sending one IPI for
each page.

The mmu_notifier_invalidate_range_start/end section is enlarged
accordingly but this is not going to fundamentally change things.  It was
more by accident that the region under mremap was for the most part still
available for secondary MMUs: the primary MMU was never allowed to
reliably access that region for the duration of the mremap (modulo
trapping SIGSEGV on the old address range which sounds unpractical and
flakey).  If users wants secondary MMUs not to lose access to a large
region under mremap they should reduce the mremap size accordingly in
userland and run multiple calls.  Overall this will run faster so it's
actually going to reduce the time the region is under mremap for the
primary MMU which should provide a net benefit to apps.

For KVM this is a noop because the guest physical memory is never
mremapped, there's just no point it ever moving it while guest runs.  One
target of this optimization is JVM GC (so unrelated to the mmu notifier
logic).

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent ebed484
Raw File
sha1.c
/*
 * SHA1 routine optimized to do word accesses rather than byte accesses,
 * and to avoid unnecessary copies into the context array.
 *
 * This was based on the git SHA1 implementation.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/cryptohash.h>
#include <asm/unaligned.h>

/*
 * If you have 32 registers or more, the compiler can (and should)
 * try to change the array[] accesses into registers. However, on
 * machines with less than ~25 registers, that won't really work,
 * and at least gcc will make an unholy mess of it.
 *
 * So to avoid that mess which just slows things down, we force
 * the stores to memory to actually happen (we might be better off
 * with a 'W(t)=(val);asm("":"+m" (W(t))' there instead, as
 * suggested by Artur Skawina - that will also make gcc unable to
 * try to do the silly "optimize away loads" part because it won't
 * see what the value will be).
 *
 * Ben Herrenschmidt reports that on PPC, the C version comes close
 * to the optimized asm with this (ie on PPC you don't want that
 * 'volatile', since there are lots of registers).
 *
 * On ARM we get the best code generation by forcing a full memory barrier
 * between each SHA_ROUND, otherwise gcc happily get wild with spilling and
 * the stack frame size simply explode and performance goes down the drain.
 */

#ifdef CONFIG_X86
  #define setW(x, val) (*(volatile __u32 *)&W(x) = (val))
#elif defined(CONFIG_ARM)
  #define setW(x, val) do { W(x) = (val); __asm__("":::"memory"); } while (0)
#else
  #define setW(x, val) (W(x) = (val))
#endif

/* This "rolls" over the 512-bit array */
#define W(x) (array[(x)&15])

/*
 * Where do we get the source from? The first 16 iterations get it from
 * the input data, the next mix it from the 512-bit array.
 */
#define SHA_SRC(t) get_unaligned_be32((__u32 *)data + t)
#define SHA_MIX(t) rol32(W(t+13) ^ W(t+8) ^ W(t+2) ^ W(t), 1)

#define SHA_ROUND(t, input, fn, constant, A, B, C, D, E) do { \
	__u32 TEMP = input(t); setW(t, TEMP); \
	E += TEMP + rol32(A,5) + (fn) + (constant); \
	B = ror32(B, 2); } while (0)

#define T_0_15(t, A, B, C, D, E)  SHA_ROUND(t, SHA_SRC, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E )
#define T_16_19(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E )
#define T_20_39(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) , 0x6ed9eba1, A, B, C, D, E )
#define T_40_59(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, ((B&C)+(D&(B^C))) , 0x8f1bbcdc, A, B, C, D, E )
#define T_60_79(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) ,  0xca62c1d6, A, B, C, D, E )

/**
 * sha_transform - single block SHA1 transform
 *
 * @digest: 160 bit digest to update
 * @data:   512 bits of data to hash
 * @array:  16 words of workspace (see note)
 *
 * This function generates a SHA1 digest for a single 512-bit block.
 * Be warned, it does not handle padding and message digest, do not
 * confuse it with the full FIPS 180-1 digest algorithm for variable
 * length messages.
 *
 * Note: If the hash is security sensitive, the caller should be sure
 * to clear the workspace. This is left to the caller to avoid
 * unnecessary clears between chained hashing operations.
 */
void sha_transform(__u32 *digest, const char *data, __u32 *array)
{
	__u32 A, B, C, D, E;

	A = digest[0];
	B = digest[1];
	C = digest[2];
	D = digest[3];
	E = digest[4];

	/* Round 1 - iterations 0-16 take their input from 'data' */
	T_0_15( 0, A, B, C, D, E);
	T_0_15( 1, E, A, B, C, D);
	T_0_15( 2, D, E, A, B, C);
	T_0_15( 3, C, D, E, A, B);
	T_0_15( 4, B, C, D, E, A);
	T_0_15( 5, A, B, C, D, E);
	T_0_15( 6, E, A, B, C, D);
	T_0_15( 7, D, E, A, B, C);
	T_0_15( 8, C, D, E, A, B);
	T_0_15( 9, B, C, D, E, A);
	T_0_15(10, A, B, C, D, E);
	T_0_15(11, E, A, B, C, D);
	T_0_15(12, D, E, A, B, C);
	T_0_15(13, C, D, E, A, B);
	T_0_15(14, B, C, D, E, A);
	T_0_15(15, A, B, C, D, E);

	/* Round 1 - tail. Input from 512-bit mixing array */
	T_16_19(16, E, A, B, C, D);
	T_16_19(17, D, E, A, B, C);
	T_16_19(18, C, D, E, A, B);
	T_16_19(19, B, C, D, E, A);

	/* Round 2 */
	T_20_39(20, A, B, C, D, E);
	T_20_39(21, E, A, B, C, D);
	T_20_39(22, D, E, A, B, C);
	T_20_39(23, C, D, E, A, B);
	T_20_39(24, B, C, D, E, A);
	T_20_39(25, A, B, C, D, E);
	T_20_39(26, E, A, B, C, D);
	T_20_39(27, D, E, A, B, C);
	T_20_39(28, C, D, E, A, B);
	T_20_39(29, B, C, D, E, A);
	T_20_39(30, A, B, C, D, E);
	T_20_39(31, E, A, B, C, D);
	T_20_39(32, D, E, A, B, C);
	T_20_39(33, C, D, E, A, B);
	T_20_39(34, B, C, D, E, A);
	T_20_39(35, A, B, C, D, E);
	T_20_39(36, E, A, B, C, D);
	T_20_39(37, D, E, A, B, C);
	T_20_39(38, C, D, E, A, B);
	T_20_39(39, B, C, D, E, A);

	/* Round 3 */
	T_40_59(40, A, B, C, D, E);
	T_40_59(41, E, A, B, C, D);
	T_40_59(42, D, E, A, B, C);
	T_40_59(43, C, D, E, A, B);
	T_40_59(44, B, C, D, E, A);
	T_40_59(45, A, B, C, D, E);
	T_40_59(46, E, A, B, C, D);
	T_40_59(47, D, E, A, B, C);
	T_40_59(48, C, D, E, A, B);
	T_40_59(49, B, C, D, E, A);
	T_40_59(50, A, B, C, D, E);
	T_40_59(51, E, A, B, C, D);
	T_40_59(52, D, E, A, B, C);
	T_40_59(53, C, D, E, A, B);
	T_40_59(54, B, C, D, E, A);
	T_40_59(55, A, B, C, D, E);
	T_40_59(56, E, A, B, C, D);
	T_40_59(57, D, E, A, B, C);
	T_40_59(58, C, D, E, A, B);
	T_40_59(59, B, C, D, E, A);

	/* Round 4 */
	T_60_79(60, A, B, C, D, E);
	T_60_79(61, E, A, B, C, D);
	T_60_79(62, D, E, A, B, C);
	T_60_79(63, C, D, E, A, B);
	T_60_79(64, B, C, D, E, A);
	T_60_79(65, A, B, C, D, E);
	T_60_79(66, E, A, B, C, D);
	T_60_79(67, D, E, A, B, C);
	T_60_79(68, C, D, E, A, B);
	T_60_79(69, B, C, D, E, A);
	T_60_79(70, A, B, C, D, E);
	T_60_79(71, E, A, B, C, D);
	T_60_79(72, D, E, A, B, C);
	T_60_79(73, C, D, E, A, B);
	T_60_79(74, B, C, D, E, A);
	T_60_79(75, A, B, C, D, E);
	T_60_79(76, E, A, B, C, D);
	T_60_79(77, D, E, A, B, C);
	T_60_79(78, C, D, E, A, B);
	T_60_79(79, B, C, D, E, A);

	digest[0] += A;
	digest[1] += B;
	digest[2] += C;
	digest[3] += D;
	digest[4] += E;
}
EXPORT_SYMBOL(sha_transform);

/**
 * sha_init - initialize the vectors for a SHA1 digest
 * @buf: vector to initialize
 */
void sha_init(__u32 *buf)
{
	buf[0] = 0x67452301;
	buf[1] = 0xefcdab89;
	buf[2] = 0x98badcfe;
	buf[3] = 0x10325476;
	buf[4] = 0xc3d2e1f0;
}
back to top