Revision 7d0d46da750a252371cb747b48ddda27d1047881 authored by Linus Torvalds on 18 January 2014, 06:19:28 UTC, committed by Linus Torvalds on 18 January 2014, 06:19:28 UTC
Pull networking fixes from David Miller: 1) The value choosen for the new SO_MAX_PACING_RATE socket option on parisc was very poorly choosen, let's fix it while we still can. From Eric Dumazet. 2) Our generic reciprocal divide was found to handle some edge cases incorrectly, part of this is encoded into the BPF as deep as the JIT engines themselves. Just use a real divide throughout for now. From Eric Dumazet. 3) Because the initial lookup is lockless, the TCP metrics engine can end up creating two entries for the same lookup key. Fix this by doing a second lookup under the lock before we actually create the new entry. From Christoph Paasch. 4) Fix scatter-gather list init in usbnet driver, from Bjørn Mork. 5) Fix unintended 32-bit truncation in cxgb4 driver's bit shifting. From Dan Carpenter. 6) Netlink socket dumping uses the wrong socket state for timewait sockets. Fix from Neal Cardwell. 7) Fix netlink memory leak in ieee802154_add_iface(), from Christian Engelmayer. 8) Multicast forwarding in ipv4 can overflow the per-rule reference counts, causing all multicast traffic to cease. Fix from Hannes Frederic Sowa. 9) via-rhine needs to stop all TX queues when it resets the device, from Richard Weinberger. 10) Fix RDS per-cpu accesses broken by the this_cpu_* conversions. From Gerald Schaefer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: s390/bpf,jit: fix 32 bit divisions, use unsigned divide instructions parisc: fix SO_MAX_PACING_RATE typo ipv6: simplify detection of first operational link-local address on interface tcp: metrics: Avoid duplicate entries with the same destination-IP net: rds: fix per-cpu helper usage e1000e: Fix compilation warning when !CONFIG_PM_SLEEP bpf: do not use reciprocal divide be2net: add dma_mapping_error() check for dma_map_page() bnx2x: Don't release PCI bars on shutdown net,via-rhine: Fix tx_timeout handling batman-adv: fix batman-adv header overhead calculation qlge: Fix vlan netdev features. net: avoid reference counter overflows on fib_rules in multicast forwarding dm9601: add USB IDs for new dm96xx variants MAINTAINERS: add virtio-dev ML for virtio ieee802154: Fix memory leak in ieee802154_add_iface() net: usbnet: fix SG initialisation inet_diag: fix inet_diag_dump_icsk() to use correct state for timewait sockets cxgb4: silence shift wrapping static checker warning
hci_h4.c
/*
*
* Bluetooth HCI UART driver
*
* Copyright (C) 2000-2001 Qualcomm Incorporated
* Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com>
* Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/signal.h>
#include <linux/ioctl.h>
#include <linux/skbuff.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "hci_uart.h"
#define VERSION "1.2"
struct h4_struct {
unsigned long rx_state;
unsigned long rx_count;
struct sk_buff *rx_skb;
struct sk_buff_head txq;
};
/* H4 receiver States */
#define H4_W4_PACKET_TYPE 0
#define H4_W4_EVENT_HDR 1
#define H4_W4_ACL_HDR 2
#define H4_W4_SCO_HDR 3
#define H4_W4_DATA 4
/* Initialize protocol */
static int h4_open(struct hci_uart *hu)
{
struct h4_struct *h4;
BT_DBG("hu %p", hu);
h4 = kzalloc(sizeof(*h4), GFP_KERNEL);
if (!h4)
return -ENOMEM;
skb_queue_head_init(&h4->txq);
hu->priv = h4;
return 0;
}
/* Flush protocol data */
static int h4_flush(struct hci_uart *hu)
{
struct h4_struct *h4 = hu->priv;
BT_DBG("hu %p", hu);
skb_queue_purge(&h4->txq);
return 0;
}
/* Close protocol */
static int h4_close(struct hci_uart *hu)
{
struct h4_struct *h4 = hu->priv;
hu->priv = NULL;
BT_DBG("hu %p", hu);
skb_queue_purge(&h4->txq);
kfree_skb(h4->rx_skb);
hu->priv = NULL;
kfree(h4);
return 0;
}
/* Enqueue frame for transmittion (padding, crc, etc) */
static int h4_enqueue(struct hci_uart *hu, struct sk_buff *skb)
{
struct h4_struct *h4 = hu->priv;
BT_DBG("hu %p skb %p", hu, skb);
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
skb_queue_tail(&h4->txq, skb);
return 0;
}
/* Recv data */
static int h4_recv(struct hci_uart *hu, void *data, int count)
{
int ret;
if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
return -EUNATCH;
ret = hci_recv_stream_fragment(hu->hdev, data, count);
if (ret < 0) {
BT_ERR("Frame Reassembly Failed");
return ret;
}
return count;
}
static struct sk_buff *h4_dequeue(struct hci_uart *hu)
{
struct h4_struct *h4 = hu->priv;
return skb_dequeue(&h4->txq);
}
static struct hci_uart_proto h4p = {
.id = HCI_UART_H4,
.open = h4_open,
.close = h4_close,
.recv = h4_recv,
.enqueue = h4_enqueue,
.dequeue = h4_dequeue,
.flush = h4_flush,
};
int __init h4_init(void)
{
int err = hci_uart_register_proto(&h4p);
if (!err)
BT_INFO("HCI H4 protocol initialized");
else
BT_ERR("HCI H4 protocol registration failed");
return err;
}
int __exit h4_deinit(void)
{
return hci_uart_unregister_proto(&h4p);
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...