Revision 7dbc3f6ead13cb87d2318443ebd8f19a987149aa authored by Mike Frysinger on 05 March 2009, 16:20:49 UTC, committed by Bryan Wu on 05 March 2009, 16:20:49 UTC
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
1 parent fb7b75a
atomic.h
#ifndef _ASM_GENERIC_BITOPS_ATOMIC_H_
#define _ASM_GENERIC_BITOPS_ATOMIC_H_
#include <asm/types.h>
#ifdef CONFIG_SMP
#include <asm/spinlock.h>
#include <asm/cache.h> /* we use L1_CACHE_BYTES */
/* Use an array of spinlocks for our atomic_ts.
* Hash function to index into a different SPINLOCK.
* Since "a" is usually an address, use one spinlock per cacheline.
*/
# define ATOMIC_HASH_SIZE 4
# define ATOMIC_HASH(a) (&(__atomic_hash[ (((unsigned long) a)/L1_CACHE_BYTES) & (ATOMIC_HASH_SIZE-1) ]))
extern raw_spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] __lock_aligned;
/* Can't use raw_spin_lock_irq because of #include problems, so
* this is the substitute */
#define _atomic_spin_lock_irqsave(l,f) do { \
raw_spinlock_t *s = ATOMIC_HASH(l); \
local_irq_save(f); \
__raw_spin_lock(s); \
} while(0)
#define _atomic_spin_unlock_irqrestore(l,f) do { \
raw_spinlock_t *s = ATOMIC_HASH(l); \
__raw_spin_unlock(s); \
local_irq_restore(f); \
} while(0)
#else
# define _atomic_spin_lock_irqsave(l,f) do { local_irq_save(f); } while (0)
# define _atomic_spin_unlock_irqrestore(l,f) do { local_irq_restore(f); } while (0)
#endif
/*
* NMI events can occur at any time, including when interrupts have been
* disabled by *_irqsave(). So you can get NMI events occurring while a
* *_bit function is holding a spin lock. If the NMI handler also wants
* to do bit manipulation (and they do) then you can get a deadlock
* between the original caller of *_bit() and the NMI handler.
*
* by Keith Owens
*/
/**
* set_bit - Atomically set a bit in memory
* @nr: the bit to set
* @addr: the address to start counting from
*
* This function is atomic and may not be reordered. See __set_bit()
* if you do not require the atomic guarantees.
*
* Note: there are no guarantees that this function will not be reordered
* on non x86 architectures, so if you are writing portable code,
* make sure not to rely on its reordering guarantees.
*
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
static inline void set_bit(int nr, volatile unsigned long *addr)
{
unsigned long mask = BIT_MASK(nr);
unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
unsigned long flags;
_atomic_spin_lock_irqsave(p, flags);
*p |= mask;
_atomic_spin_unlock_irqrestore(p, flags);
}
/**
* clear_bit - Clears a bit in memory
* @nr: Bit to clear
* @addr: Address to start counting from
*
* clear_bit() is atomic and may not be reordered. However, it does
* not contain a memory barrier, so if it is used for locking purposes,
* you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
* in order to ensure changes are visible on other processors.
*/
static inline void clear_bit(int nr, volatile unsigned long *addr)
{
unsigned long mask = BIT_MASK(nr);
unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
unsigned long flags;
_atomic_spin_lock_irqsave(p, flags);
*p &= ~mask;
_atomic_spin_unlock_irqrestore(p, flags);
}
/**
* change_bit - Toggle a bit in memory
* @nr: Bit to change
* @addr: Address to start counting from
*
* change_bit() is atomic and may not be reordered. It may be
* reordered on other architectures than x86.
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
static inline void change_bit(int nr, volatile unsigned long *addr)
{
unsigned long mask = BIT_MASK(nr);
unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
unsigned long flags;
_atomic_spin_lock_irqsave(p, flags);
*p ^= mask;
_atomic_spin_unlock_irqrestore(p, flags);
}
/**
* test_and_set_bit - Set a bit and return its old value
* @nr: Bit to set
* @addr: Address to count from
*
* This operation is atomic and cannot be reordered.
* It may be reordered on other architectures than x86.
* It also implies a memory barrier.
*/
static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
{
unsigned long mask = BIT_MASK(nr);
unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
unsigned long old;
unsigned long flags;
_atomic_spin_lock_irqsave(p, flags);
old = *p;
*p = old | mask;
_atomic_spin_unlock_irqrestore(p, flags);
return (old & mask) != 0;
}
/**
* test_and_clear_bit - Clear a bit and return its old value
* @nr: Bit to clear
* @addr: Address to count from
*
* This operation is atomic and cannot be reordered.
* It can be reorderdered on other architectures other than x86.
* It also implies a memory barrier.
*/
static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
{
unsigned long mask = BIT_MASK(nr);
unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
unsigned long old;
unsigned long flags;
_atomic_spin_lock_irqsave(p, flags);
old = *p;
*p = old & ~mask;
_atomic_spin_unlock_irqrestore(p, flags);
return (old & mask) != 0;
}
/**
* test_and_change_bit - Change a bit and return its old value
* @nr: Bit to change
* @addr: Address to count from
*
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
{
unsigned long mask = BIT_MASK(nr);
unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
unsigned long old;
unsigned long flags;
_atomic_spin_lock_irqsave(p, flags);
old = *p;
*p = old ^ mask;
_atomic_spin_unlock_irqrestore(p, flags);
return (old & mask) != 0;
}
#endif /* _ASM_GENERIC_BITOPS_ATOMIC_H */
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...