Revision 7ec5cff52c9288f79f3410af70626e16efda8123 authored by Fons Rademakers on 14 July 2003, 15:35:12 UTC, committed by Fons Rademakers on 14 July 2003, 15:35:12 UTC
git-svn-id: http://root.cern.ch/svn/root/trunk@6922 27541ba8-7e3a-0410-8455-c3a389f83636
1 parent b449678
configure
#! /bin/sh
# A (not so) simple configure script.
#
# Authors: Christian Holm Christensen and Fons Rademakers
#
# To help with debugging the script, some comments are preprended with
# 3 '#' echo and 3 '%' - replace that pattern with echo and 3 '%' to
# get printouts. When done replace the pattern echo and 3 '%' with the
# original pattern of 3 '#' echo and 3 '%'. Emacs command M-C-% does
# this easily.
#
######################################################################
#
### echo %%% Some global variables
#
found_lib=no
found_dir=no
found_hdr=no
noact="no"
enable_afs=no
enable_alien=yes
enable_asimage=yes
enable_cern=yes
enable_chirp=yes
enable_dcache=yes
enable_krb5=yes
enable_ldap=yes
enable_mysql=yes
enable_opengl=yes
enable_openiv=yes
enable_pgsql=yes
enable_pythia=yes
enable_pythia6=yes
enable_qt=yes
enable_rfio=yes
enable_rpath=no
enable_sapdb=yes
enable_shadowpw=
enable_shared=yes
enable_soversion=no
enable_srp=yes
enable_table=no
enable_thread= # must be set explicitely via --enable-thread
enable_venus=yes
enable_exceptions=yes
enable_explicitlink=no
show_pkglist=no
options="enable_afs enable_cern enable_mysql enable_opengl enable_pgsql \
enable_pythia enable_pythia6 enable_qt enable_rfio enable_dcache \
enable_rpath enable_sapdb enable_shadowpw enable_shared \
enable_soversion enable_srp enable_table enable_thread enable_venus \
enable_krb5 enable_ldap enable_exceptions enable_openiv enable_alien \
enable_asimage enable_chirp enable_explicitlink"
######################################################################
#
### echo %%% Some common functions
#
message() {
# Write a simple message to std out
if test $# -lt 1 ; then
echo "message: Too few arguments"
return 1
fi
echo $ac_n "$* ... $ac_c"
}
checking_msg() {
# Write a simple "checking" message to std out.
if test $# -lt 1 ; then
echo "checking_msg: Too few arguments"
return 1
fi
echo $ac_n "Checking for$ac_c"
while test $# -gt 1 ; do
echo $ac_n " $1,$ac_c"
shift
if test $# -eq 1 ; then
echo $ac_n " or$ac_c"
fi
done
echo $ac_n " $1 ... $ac_c"
}
check_library() {
# This function will try to locate a library [$1] in the specific
# directory [$3] or in a default path [$*]. If the second argument
# [$2] is not "no", then shared libraries are favoured.
# The result of the search is stored in found_lib and found_dir,
# which should be immediately copied, since the variables value will
# be overwritten at next invocation of this function.
# Assert that we got enough arguments
if test $# -lt 4 ; then
echo "check_library: Too few arguments"
return 1
fi
# Save arguments in local names
lib=$1 ; shift
shared=$1 ; shift
libdirl=$1 ; shift
libdirs="$*"
# Write a message
checking_msg $lib
# check if we got a specific argument as to where the library
# is to be found
if test ! "x$libdirl" = "x" ; then
libdirs=$libdirl
fi
found_lib=no
found_dir=no
# Make list of libraries to search for. The .lib extension is for
# Windoze - note $shared is always "no" on windoze, since we need
# the .lib export library to link.
libs=""
for i in $lib ; do
for ext in .a .lib ; do
libs="$libs $i$ext"
done
done
if test ! "x$shared" = "xno" ; then
slibs=""
for i in $lib ; do
for ext in .so .sl .dylib ; do
slibs="$slibs $i$ext"
done
done
libs="$slibs $libs"
fi
# Loop over the list of possible directories, and see if we can
# find any of the library files as determind above.
for i in $libdirs ; do
# look first in the lib64 directories
if test "x$checklib64" = "xyes" ; then
i64=`echo $i | sed 's|lib|lib64|'`
i="$i64 $i"
fi
for l in $i ; do
for j in ${libs} ; do
# if we found the file (it's readable by user), we set the
# logical variables and are on our way, otherwise we continue
if test -r $l/$j ; then
found_dir=$l
found_lib=$j
break 3
fi
done
done
done
# skip cygwin libraries when in pure Win32 mode
if test "x$platform" = "xwin32"; then
case $found_dir in
/lib|/usr/*) found_dir="no" ;;
esac
fi
echo $found_dir
unset libs
unset slibs
unset libdirs
if test "x$found_dir" = "xno" || test "$found_lib" = "xno" ; then
found_dir=""
found_lib=""
else
flib=""
for i in $lib ; do
for ext in .a .lib ; do
if test "x$found_lib" = "x$i$ext" ; then
flib=$i$ext
fi
done
done
if test "x$shared" = "xno" || \
test "x$found_lib" = "x$flib" ; then
found_lib=${found_dir}/${found_lib}
found_dir=""
else
found_lib=`echo $found_lib | sed 's|^lib\(.*\)\..*|-l\1|'`
found_dir=-L${found_dir}
fi
fi
unset shared
unset lib
unset flib
unset libdirl
}
check_header() {
# This function will try to locate a header [$1] in the specific
# directory [$2] or in a default path [$*].
# The result of the search is stored in found_hdr and found_dir,
# which should be immediately copied, since the variables value will
# be overwritten at next invocation of this function.
# Assert that we got enough arguments
if test $# -lt 3 ; then
echo "check_header: Too few arguments"
return 1
fi
# Save arguments in logical names
hdrs=$1 ; shift
hdrdir=$1 ; shift
hdrdirs="$*"
# Write a message
checking_msg $hdrs
# Check if we got a specific argument as to where the library
# is to be found
if test ! "x$hdrdir" = "x" ; then
hdrdirs=$hdrdir
fi
found_hdr=no
found_dir=no
# Loop over the list of possible directories, and see if we can
# find any of the library files as determind above.
for i in $hdrdirs; do
for j in ${hdrs} ; do
# if we found the file (it's readable by user), we set the
# logical variables and are on our way, otherwise we continue
if test -r $i/$j ; then
found_dir=$i
found_hdr=$j
break 2
fi
done
done
# skip cygwin headers when in pure Win32 mode
if test "x$platform" = "xwin32"; then
case $found_dir in
/usr/*) found_dir="no" ;;
esac
fi
echo $found_dir
if test "x$found_hdr" = "xno" || test "$found_dir" = "xno" ; then
found_hdr=""
found_dir=""
fi
# Avoid inclusion of /usr/include, which is always included anyway
if test "x$found_dir" = "x/usr/include" ; then
found_dir="include"
fi
unset hdrs
unset hdrdirs
unset hdrdir
}
check_symbol() {
# This function will try to locate a symbol [$1] in a specific
# library [$2] and in a given directory [$3].
# The result of the check is stored in found_symbol, 1 if true,
# 0 otherwise, which should be immediately copied, since the variable
# will be overwritten at next invocation of this function.
# Assert that we got enough arguments
if test $# -ne 3 ; then
echo "check_symbol: Not 3 arguments"
return 1
fi
# Save arguments in logical names
symbol=$1 ; shift
symbollib=$1 ; shift
symboldir=$1
# Check if we got a specific argument as to where the library
# is to be found
symbolfile=$symbollib
if test ! "x$symboldir" = "x" ; then
symbolfile=$symboldir/$symbollib
if test ! -r $symbolfile ; then
for i in .a .so .lib ; do
if test -r $symbolfile$i ; then
symbolfile=$symbolfile$i
break
fi
done
fi
fi
if test "x$symbolfile" = "x" || test ! -r $symbolfile ; then
found_symbol=0
return 1
fi
symbol_in_lib=`nm $symbolfile | grep $symbol > /dev/null 2>&1`
if test $? -eq 0 ; then
found_symbol=1
else
found_symbol=0
fi
}
###################################################################
#
### echo %%% Some skeleton and config files
#
ARCHS=config/ARCHS
MAKEIN=config/Makefile.in
MAKEOUT=config/Makefile.config
CONFIN=config/config.in
CONFOUT=include/config.h
RCONFIN=config/root-config.in
RCONFOUT=bin/root-config
ROOTRCIN=config/rootrc.in
ROOTRCOUT=etc/system.rootrc
MEMPROBEIN=config/memprobe.in
MEMPROBEOUT=bin/memprobe
MIMEUNIXIN=config/mimes.unix.in
MIMEWIN32IN=config/mimes.win32.in
MIMEOUT=etc/root.mimes
######################################################################
#
### echo %%% Testing the echo features
#
if `(echo "testing\c"; echo 1,2,3) | grep c > /dev/null` ; then
if `(echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn > /dev/null`; then
ac_n= ac_c='
' ac_t=' '
else
ac_n=-n ac_c= ac_t=
fi
else
ac_n= ac_c='\c' ac_t=
fi
######################################################################
#
### echo %%% Help function
#
confhelp() {
cat <<EOF
Usage: $0 <architecture> [flag=value]
FLAG DESCRIPTION DEFAULT
--aclocaldir Autoconf macro install dir(<prefix>/share/aclocal)
--bindir Binary installation dir (<prefix>/bin)
--build Build configuration [debug, exceptions, ...],
overrides the ROOTBUILD shell variable
--cintincdir CINT interpeted headers (<datadir>/cint)
--datadir Data installation dir (<prefix>/share/root)
--docdir Documentation (<prefix>/share/doc/root)
--elispdir Where to put Emacs Lisp (<prefix>/share/emacs/site-lisp)
--etcdir Config installation dir (/etc/root)
--fontdir Font installation dir (<datadir>/fonts)
--iconpath Icon installation dir (<datadir>/icons)
--incdir Header installation dir (<prefix>/include/root)
--libdir Library installation dir (<prefix>/lib/root)
--macrodir Macro installation dir (<datadir>/macros)
--mandir Manpages installation dir (<prefix>/share/man/man1)
--no-create Do not create output files, dry run
--prefix Installation prefix (/usr/local)
--proofdir PROOF utils dir (<datadir>/proof)
--srcdir Sources installation dir (<datadir>/src)
--testdir Tests (<docdir>/test)
--tutdir Tutorials (<docdir>/tutorial)
enable/disable options, prefix with either --enable- or --disable-
afs AFS support, requires AFS libs and objects
alien AliEn support, requires libAliEn from ALICE
asimage Image processing support, requires libAfterImage
cern CERNLIB usage, build h2root and g2root
chirp Chirp support (Condor remote I/O), requires libchirp_client
dcache dCache support, requires libdcap from DESY
exceptions Turn on compiler exception handling capability
explicitlink Explicitly link with all dependent libraries
krb5 Kerberos5 support, requires Kerberos libs
ldap LDAP support, requires (Open)LDAP libs
mysql MySQL support, requires libmysqlclient
opengl OpenGL support, requires libGL and libGLU
openiv OpenInventor support, requires libInventor and libInventorXt
pgsql PostgreSQL support, requires libpq
pythia Pythia5 EG support, requires libPythia
pythia6 Pythia6 EG support, requires libPythia6
rfio SHIFT support, requires libshift from CERN
rpath Set library path on executables
sapdb SapDB support, requires libsqlod and libsqlrte
shadowpw Shadow password support
shared Use shared 3rd party libraries if possible
soversion Set version number in sonames
srp SRP support, requires SRP source tree
table Build libTable contrib library
thread Thread support
venus Venus EG support, requires libVenus
with options, prefix with --with-, enables corresponding support
afs AFS support, location of AFS distribution
alien-incdir AliEn support, location of AliEn.h
alien-libdir AliEn support, location of libAliEn
cern-libdir HBOOK converter, location of CERNLIB libraries
chirp-incdir Chirp support, location of chirp_client.h
chirp-libdir Chirp support, location of libchirp_client
dcap-incdir dCache support, location of dcap.h
dcap-libdir dCache support, location of libdcap
krb5 Kerberos5 support, location of Kerberos distribution
ldap-incdir LDAP support, location of ldap.h
ldap-libdir LDAP support, location of libldap
mysql-incdir MySQL support, location of mysql.h
mysql-libdir MySQL support, location of libmysqlclient
opengl-incdir OpenGL support, location of GL/gl.h
opengl-libdir OpenGL support, location of libGL
openiv-incdir OpenInventor support, location of Inventor/SoType.h
openiv-libdir OpenInventor support, location of libInventor
pgsql-incdir PostgreSQL support, location of libpq-fe.h
pgsql-libdir PostgreSQL support, location of libpq
pythia-libdir PYHTIA support, location of libPythia
pythia6-libdir PYHTIA6 support, location of libPythia6
sapdb-incdir SapDB support, location of sql.h
sapdb-libdir SapDB support, location of libsqlod
shift-libdir RFIO support, location of libshift
srp Secure Remote Passwd support, location of SRP distribution
srp-incdir SRP support, location header of t_server.h
srp-libdir SRP support, location header of libsrp.a
sys-iconpath Extra icon path
thread-libdir Thread support, path to libpthread
venus-libdir VENUS support, location of libVenus
x11-libdir X11 support, path to libX11
xpm-libdir XPM support, path to libXpm
EOF
cat config/ARCHS
}
######################################################################
#
### echo %%% See if we got the architecture
#
if test $# -lt 1 ; then
echo "You must give architecture as first argument - try $0 --help"
exit 1
else
case $1 in
-h|--help) confhelp ; exit 0 ;;
*) arch1=$1
if test "$arch1" = "linuxegcs" ; then
arch1="linux"
fi
if `grep "^$arch1 " $ARCHS >/dev/null 2>&1` ; then
arch=$arch1
echo "Configuring for $arch"
shift
else
echo "Invalid architecture. Try $0 --help"
exit 1
fi
if test "x$arch" = "xwin32" || test "x$arch" = "xwin32gdk" ; then
platform="win32"
else
platform=$arch
fi
if test "x$arch" = "xlinuxx8664gcc" ; then
checklib64="yes"
fi
;;
esac
fi
######################################################################
#
### echo %%% Some clean up
#
trap "rm -f Makefile.tmp config.tmp root-config.tmp TMakefile.tmp rootrc.tmp \
memprobe.tmp; exit 1" 1 2 3 15
######################################################################
#
### echo %%% Command line arguments
#
if test $# -gt 0 ; then
while test ! "x$1" = "x" ; do
case "$1" in
-*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
*) optarg= ;;
esac
case $1 in
--help|-h) confhelp ; exit 0 ;;
################################################################
#
# With options to specifiy third part software
#
--no-create) noact="yes" ;;
--with-afs=*) afsdir=$optarg ; enable_afs="yes" ;;
--with-alien-incdir=*) alienincdir=$optarg ; enable_alien="yes" ;;
--with-alien-libdir=*) alienlibdir=$optarg ; enable_alien="yes" ;;
--with-cern-libdir=*) cernlibdir=$optarg ; enable_cern="yes" ;;
--with-chirp-incdir=*) chirpincdir=$optarg ; enable_chirp="yes" ;;
--with-chirp-libdir=*) chirplibdir=$optarg ; enable_chirp="yes" ;;
--with-dcap-incdir=*) dcapincdir=$optarg ; enable_dcache="yes" ;;
--with-dcap-libdir=*) dcaplibdir=$optarg ; enable_dcache="yes" ;;
--with-krb5=*) krb5dir=$optarg ; enable_krb5="yes" ;;
--with-ldap-incdir=*) ldapincdir=$optarg ; enable_ldap="yes" ;;
--with-ldap-libdir=*) ldaplibdir=$optarg ; enable_ldap="yes" ;;
--with-mysql-incdir=*) mysqlincdir=$optarg ; enable_mysql="yes" ;;
--with-mysql-libdir=*) mysqllibdir=$optarg ; enable_mysql="yes" ;;
--with-opengl-incdir=*) openglincdir=$optarg ; enable_opengl="yes" ;;
--with-opengl-libdir=*) opengllibdir=$optarg ; enable_opengl="yes" ;;
--with-openiv-incdir=*) openivincdir=$optarg ; enable_openiv="yes" ;;
--with-openiv-libdir=*) openivlibdir=$optarg ; enable_openiv="yes" ;;
--with-pgsql-incdir=*) pgsqlincdir=$optarg ; enable_pgsql="yes" ;;
--with-pgsql-libdir=*) pgsqllibdir=$optarg ; enable_pgsql="yes" ;;
--with-pythia-libdir=*) pythialibdir=$optarg ; enable_pythia="yes" ;;
--with-pythia6-libdir=*) pythia6libdir=$optarg ; enable_pythia6="yes" ;;
--with-qt-incdir=*) qtincdir=$optarg ; enable_qt="yes" ;;
--with-qt-libdir=*) qtlibdir=$optarg ; enable_qt="yes" ;;
--with-sapdb-incdir=*) sapdbincdir=$optarg ; enable_sapdb="yes" ;;
--with-sapdb-libdir=*) sapdblibdir=$optarg ; enable_sapdb="yes" ;;
--with-shift-libdir=*) shiftlibdir=$optarg ; enable_rfio="yes" ;;
--with-srp-incdir=*) srpincdir=$optarg ; enable_srp="yes" ;;
--with-srp-libdir=*) srplibdir=$optarg ; enable_srp="yes" ;;
--with-srp=*) srpdir=$optarg ; enable_srp="yes" ;;
--with-sys-iconpath=*) extraiconpath=$optarg ;;
--with-thread-libdir=*) threadlibdir=$optarg ; enable_thread="yes" ;;
--with-venus-libdir=*) venuslibdir=$optarg ; enable_venus="yes" ;;
--with-x11-libdir=*) x11libdir=$optarg ;;
--with-xpm-libdir=*) xpmlibdir=$optarg ;;
################################################################
#
# Enable/disable to turn on/off third party software linkage and
# features
#
--enable-*)
f=`echo $1 | sed -e 's/--//' -e 's/-/_/'`
eval $f=yes
for c in $options ; do
if test "x$c" = "x$f" ; then
f=""
fi
done
if test "x$f" != "x" ; then
echo "Invalid option '$1'. Try $0 --help" ; exit 1 ;
fi
;;
--disable-*)
f=`echo $1 | sed -e 's/--disable/enable/' -e 's/-/_/'`
eval $f=no
for c in $options ; do
if test "x$c" = "x$f" ; then
f=""
fi
done
if test "x$f" != "x" ; then
echo "Invalid option '$1'. Try $0 --help" ; exit 1 ;
fi
;;
################################################################
#
# Build steering option
#
--build=*) rootbuild="ROOTBUILD := $optarg" ;;
################################################################
#
# Install path options
#
--aclocaldir=*) haveconfig=-DHAVE_CONFIG ; aclocaldir=$optarg ;;
--bindir=*) haveconfig=-DHAVE_CONFIG ; bindir=$optarg ;;
--cintincdir=*) haveconfig=-DHAVE_CONFIG ; cintincdir=$optarg ;;
--datadir=*) haveconfig=-DHAVE_CONFIG ; datadir=$optarg ;;
--docdir=*) haveconfig=-DHAVE_CONFIG ; docdir=$optarg ;;
--elispdir=*) haveconfig=-DHAVE_CONFIG ; elispdir=$optarg ;;
--etcdir=*) haveconfig=-DHAVE_CONFIG ; etcdir=$optarg ;;
--fontdir=*) haveconfig=-DHAVE_CONFIG ; fontdir=$optarg ;;
--iconpath=*) haveconfig=-DHAVE_CONFIG ; iconpath=$optarg ;;
--incdir=*) haveconfig=-DHAVE_CONFIG ; incdir=$optarg ;;
--libdir=*) haveconfig=-DHAVE_CONFIG ; libdir=$optarg ;;
--macrodir=*) haveconfig=-DHAVE_CONFIG ; macrodir=$optarg ;;
--mandir=*) haveconfig=-DHAVE_CONFIG ; mandir=$optarg ;;
--pkglist*) show_pkglist="yes" ; noact="yes";;
--prefix*) haveconfig=-DHAVE_CONFIG ; prefix=$optarg ;;
--srcdir=*) haveconfig=-DHAVE_CONFIG ; srcdir=$optarg ;;
--testdir=*) haveconfig=-DHAVE_CONFIG ; testdir=$optarg ;;
--tutdir=*) haveconfig=-DHAVE_CONFIG ; tutdir=$optarg ;;
*) echo "Invalid option '$1'. Try $0 --help" ; exit 1 ;;
esac
shift
done
fi
######################################################################
#
### echo %%% Copy skeletons to temporary files
#
if test "x$noact" = "xno"; then
cp -f $MAKEIN Makefile.tmp
cp -f $CONFIN config.tmp
cp -f $RCONFIN root-config.tmp
cp -f $ROOTRCIN rootrc.tmp
cp -f $MEMPROBEIN memprobe.tmp
fi
######################################################################
#
### echo %%% Should sonames contain version numbers
#
if test "x$enable_soversion" = "xyes"; then
major=`sed 's|\(.*\)\..*/.*|\1|' < build/version_number`
minor=`sed 's|.*\.\(.*\)/.*|\1|' < build/version_number`
revis=`sed 's|.*\..*/\(.*\)|\1|' < build/version_number`
mkliboption="-v $major $minor $revis "
unset major
unset minor
unset revis
fi
######################################################################
#
### echo %%% On Windoze always set enable_shared to no; need .lib
#
if test "x$platform" = "xwin32"; then
enable_shared="no"
fi
######################################################################
#
### echo %%% X11 and XPM Library - Mandatory lib on Unix
#
# Mandatory test, must succeed
# Check for X11 and Xpm library (for X11 use always shared lib)
#
if test ! "$platform" = "win32"; then
check_library "libX11" "yes" "$x11libdir" \
/usr/lib32 /usr/lib /usr/X11R6/lib /usr/lib/X11 /usr/openwin/lib \
/usr/local/lib /usr/local/lib/X11 /use/local/X11R6/lib \
/usr/X11/lib /usr/lib/X11R5
x11libdir=$found_dir
if test "x$found_lib" = "x" ; then
echo "`basename $0`: libX11 MUST be installed"
exit 1
fi
check_library "libXpm" "$enable_shared" "$xpmlibdir" \
$XPM $XPM/lib /usr/lib /usr/local/lib /usr/lib/X11 \
/usr/local/lib/X11 /usr/X11R6/lib /use/local/X11R6/lib \
/usr/X11/lib
xpmlib=$found_lib
xpmlibdir=$found_dir
if test "x$xpmlib" = "x" ; then
echo "`basename $0`: libXpm MUST be installed"
exit 1
fi
fi
######################################################################
#
### echo %%% Exceptions - compiler feature
#
if test "x$EXCEPTIONS" = "xno" ; then
enable_exceptions=no
fi
e=`echo $rootbuild | sed 's/.*exceptions.*/1/'`
if test "x$e" = "x1" ; then
enable_exceptions=no
fi
######################################################################
#
### echo %%% Explicitlink - explicitly link with all dependent libraries
#
case $platform in
freebsd*|aix*|win32*)
enable_explicitlink="yes"
;;
esac
if test "$platform" = "macosx" ; then
enable_explicitlink="no"
fi
if test "x$enable_explicitlink" = "xyes" && test ! "$platform" = "win32" ; then
mkliboption=$mkliboption"-x "
fi
######################################################################
#
### echo %%% Posix Thread Library
#
# Check for posix thread library
#
case $platform in
linux|linuxdeb|linuxicc|linuxia64*|linuxx8664*|win32gcc)
if test "x$enable_thread" = "x"; then
enable_thread="yes"
fi
;;
esac
if test "x$enable_thread" = "xyes" && test ! "$platform" = "win32" ; then
check_library "libpthread" "$enable_shared" "$threadlibdir" \
$THREAD $THREAD/lib /usr/lib32 /usr/lib /usr/local/lib /usr/lib/X11 \
/usr/local/lib/X11 /usr/X11R6/lib /usr/local/X11R6/lib \
/usr/X11/lib /usr/shlib
threadlib=$found_lib
threadlibdir=$found_dir
if test "x$threadlib" = "x" ; then
enable_thread="no"
fi
fi
######################################################################
#
### echo %%% OpenGL Support - Third party libraries
#
# (see mesa3d.org)
#
if test ! "x$enable_opengl" = "xno" && test ! "$platform" = "win32" ; then
# Check for OpenGL compatible include and library
check_header "GL/gl.h" "$openglincdir" $OPENGL $OPENGL/include \
/usr/include /usr/include/X11 /usr/X11/include \
/usr/X11R6/include /usr/local/include/X11 \
/usr/local/X11R6/include /usr/local/include \
/usr/include/Mesa /usr/local/include/Mesa /usr/Mesa/include \
/usr/local/Mesa/include /usr/Mesa /usr/local/Mesa /opt/Mesa \
/opt/Mesa/include /opt/graphics/OpenGL/include
openglinc=$found_hdr
openglincdir=$found_dir
opengllibdirs="$OPENGL $OPENGL/lib /usr/lib /usr/local/lib /usr/lib/X11 \
/usr/X11R6/lib /usr/local/lib/X11 /usr/local/X11R6/lib \
/usr/X11/lib /usr/lib/Mesa /usr/local/lib/Mesa /usr/Mesa/lib \
/usr/local/Mesa/lib /usr/Mesa /usr/local/Mesa /opt/Mesa \
/opt/Mesa/lib /opt/graphics/OpenGL/lib/hpux64 /opt/graphics/OpenGL/lib"
keep=$opengllibdir
check_library "libGL libMesaGL" "$enable_shared" \
"$opengllibdir" $opengllibdirs
opengllib=$found_lib
opengllibdir=$found_dir
check_library "libGLU libMesaGLU" "$enable_shared" \
"$keep" $opengllibdirs
openglulib=$found_lib
openglulibdir=$found_dir
if test "x$openglincdir" = "x" || \
test "x$opengllib" = "x" || \
test "x$openglulib" = "x" ; then
enable_opengl="no"
fi
fi
######################################################################
#
### echo %%% OpenInventor Support - Third party libraries
#
# (see http://oss.sgi.com/projects/inventor/)
#
if test "x$enable_opengl" = "xno" ; then
enable_openiv="no"
fi
if test ! "x$enable_openiv" = "xno" && test ! "$platform" = "win32" ; then
# Check for OpenInventor compatible include and library
check_header "Inventor/SoType.h" "$openivincdir" $IVROOT $IVROOT/include \
$IVROOT/usr/include /usr/include /usr/include/X11 /usr/X11/include \
/usr/X11R6/include /usr/local/include/X11 \
/usr/local/X11R6/include /usr/local/include \
/usr/include/inventor /usr/local/include/inventor \
/usr/inventor/include /usr/local/inventor/include \
/usr/inventor/usr/include /usr/local/inventor/usr/include \
/usr/local/inventor /opt/inventor /opt/inventor/include \
/opt/inventor/usr/include
openivinc=$found_hdr
openivincdir=$found_dir
openivlibdirs="$IVROOT $IVROOT/lib $IVROOT/usr/lib /usr/lib /usr/local/lib \
/usr/lib/X11 /usr/X11R6/lib /usr/local/lib/X11 /usr/local/X11R6/lib \
/usr/X11/lib /usr/lib/inventor /usr/local/lib/inventor \
/usr/inventor/lib /usr/inventor/usr/lib /usr/local/inventor/lib \
/usr/local/inventor/usr/lib /usr/inventor /usr/local/inventor \
/opt/inventor /opt/inventor/lib /opt/inventor/usr/lib"
keep=$openivlibdir
check_library "libInventor" "$enable_shared" \
"$openivlibdir" $openivlibdirs
openivlib=$found_lib
openivlibdir=$found_dir
check_library "libInventorXt" "$enable_shared" \
"$keep" $openivlibdirs
openivlib="$openivlib $found_lib"
openivlibdir="$openivlibdir $found_dir"
if test "x$openivincdir" = "x" || \
test "x$openivlib" = "x" ; then
enable_openiv="no"
fi
fi
######################################################################
#
### echo %%% OpenGL support on Windoze
#
# On win32 we always have OpenGL available (is this true?)
#
if test "$platform" = "win32"; then
enable_opengl="yes"
openglincdir="include"
fi
######################################################################
#
### echo %%% MySQL Support - Third party libraries
#
# (See mysql.org)
#
# If the user has set the flags "--disable-mysql", we don't check for
# MySQL at all.
#
if test ! "x$enable_mysql" = "xno"; then
# Check for MySQL include and library
check_header "mysql.h" "$mysqlincdir" \
$MYSQL $MYSQL/include /usr/local/include /usr/local/include/mysql \
/usr/local/mysql /usr/local/mysql/include /opt/mysql \
/opt/mysql/include /usr/include /usr/include/mysql \
/usr/mysql /usr/mysql/include
mysqlinc=$found_hdr
mysqlincdir=$found_dir
check_library "libmysqlclient" "$enable_shared" "$mysqllibdir" \
$MYSQL $MYSQL/lib /usr/local/lib /usr/local/lib/mysql \
/usr/local/mysql /usr/local/mysql/lib /opt/mysql /opt/mysql/lib \
/usr/lib /usr/lib/mysql /usr/mysql /usr/mysql/lib
mysqllib=$found_lib
mysqllibdir=$found_dir
# on linux, but maybe also other systems, explicitely add libz
# (formally only needed when linking against the static libmysqlclient.a)
if test ! "x$mysqllib" = "x" ; then
case $arch in
linux*|win32gcc) mysqllib="$mysqllib -lz" ;;
esac
fi
if test "x$mysqlincdir" = "x" || test "x$mysqllib" = "x"; then
enable_mysql="no"
fi
fi
######################################################################
#
### echo %%% PostgreSQL Support - Third party libraries
#
# (See postgresql.org)
#
# If the user has set the flags "--disable-pgsql", we don't check for
# PostgreSQL at all.
#
if test ! "x$enable_pgsql" = "xno"; then
# Check for PgSQL include and library
check_header "libpq-fe.h" "$pgsqlincdir" $PGSQL $PGSQL/include \
/usr/include /usr/local/include /usr/local/pgsql/include \
/usr/include/pgsql /usr/include/postgresql /usr/pgsql/include \
/usr/local/include/pgsql /usr/local/include/postgresql \
/usr/pgsql /usr/local/pgsql /opt/pgsql /opt/pgsql/include
pgsqlinc=$found_hdr
pgsqlincdir=$found_dir
check_library "libpq" "$enable_shared" "$pgsqllibdir" \
$PGSQL $PGSQL/lib /usr/local/pgsql/lib /usr/local/lib \
/usr/lib/pgsql /usr/local/lib/pgsql /usr/pgsql/lib /usr/lib \
/usr/pgsql /usr/local/pgsql /opt/pgsql /opt/pgsql/lib
pgsqllib=$found_lib
pgsqllibdir=$found_dir
if test "x$pgsqlincdir" = "x" || test "x$pgsqllib" = "x"; then
enable_pgsql="no"
fi
fi
######################################################################
#
### echo %%% Qt Support - Optional alternative graphics backend
#
# If the user has set the flags "--disable-qt", we don't check for
# Qt at all.
#
if test ! "x$enable_qt" = "xno"; then
# Check for Qt include and library
check_header "qt.h" "$qtincdir" $QTDIR $QTDIR/include \
/usr/local/include /usr/local/qt/include /usr/include \
/usr/include/qt
qtinc=$found_hdr
qtincdir=$found_dir
check_library "libqt-mt libqt" "$enable_shared" "$qtlibdir" \
$QTDIR $QTDIR/lib /usr/local/lib /usr/local/qt/lib \
/usr/lib /usr/qt/lib
qtlib=$found_lib
qtlibdir=$found_dir
if test "x$qtincdir" = "x" || test "x$qtlib" = "x"; then
enable_qt="no"
fi
fi
######################################################################
#
### echo %%% SapDB Support - Third party libraries
#
# (See www.sapdb.org)
#
# If the user has set the flags "--disable-sapdb", we don't check for
# SapDB at all.
#
if test ! "x$enable_sapdb" = "xno"; then
# Check for SapDB include and library
check_header "sql.h" "$sapdbincdir" $SAPDB $SAPDB/include \
/opt/sapdb/interfaces/odbc/incl /usr/sapdb/interfaces/odbc/incl \
/usr/sapdb/include /usr/local/sapdb/interfaces/odbc/incl \
/usr/sapdb/web/incl /usr/include/sapdb /usr/local/include/sapdb \
/usr/local/sapdb/include /usr/local/sapdb/web/incl /usr/sapdb \
/usr/local/sapdb /opt/sapdb /opt/sapdb/include /opt/sapdb/web/incl
sapdbinc=$found_hdr
sapdbincdir=$found_dir
check_library "libsqlod" "$enable_shared" "$sapdblibdir" \
$SAPDB $SAPDB/lib /opt/sapdb/interfaces/odbc/lib \
/usr/sapdb/interfaces/odbc/lib /usr/spadb/lib \
/usr/local/sapdb/interfaces/odbc/lib /usr/local/sapdb/lib \
/usr/lib/sapdb /usr/local/lib/sapdb /usr/sapdb/lib \
/usr/local/sapdb/lib /usr/sapdb /usr/local/sapdb \
/opt/sapdb /opt/sapdb/lib /usr/sapdb/web/lib \
/usr/local/sapdb/web/lib /opt/sapdb/web/lib
sapdblib=$found_lib
sapdblibdir=$found_dir
if test "x$sapdbincdir" = "x" || test "x$sapdblib" = "x"; then
enable_sapdb="no"
fi
fi
######################################################################
#
### echo %%% SHIFT Support - Third party libraries
#
# (See http://www.cern.ch)
#
# Check for libshift.a
#
if test ! "x$enable_rfio" = "xno" ; then
check_library "libshift shiftmd shift" "$enable_shared" "$shiftlibdir" \
$RFIO $RFIO/lib /cern/pro/lib /cern/new/lib /cern/old/lib \
/opt/shift/lib /usr/local/shift/lib /usr/lib/shift \
/usr/local/lib/shift /usr/lib /usr/local/lib
shiftlib=$found_lib
shiftlibdir=$found_dir
if test "x$shiftlib" = "x"; then
enable_rfio="no"
else
case $platform in
linux*) shiftlib="$shiftlib -lnsl" ;;
solarisCC5) shiftlib="$shiftlib -lposix4" ;;
esac
fi
fi
######################################################################
#
### echo %%% CERNLIB Usage - Third party libraries
#
# (See http://www.cern.ch)
#
# Check for CERN libs (libpacklib and libkernlib)
#
if test ! "x$enable_cern" = "xno"; then
cernlibdirs="$CERNLIB $CERNLIB/lib ${CERN}/${CERN_LEVEL}/lib \
/cern/pro/lib /cern/new/lib /cern/old/lib /opt/cern/pro/lib \
/opt/cern/new/lib /opt/cern/old/lib /usr/local/cern/pro/lib \
/usr/local/cern/new/lib /usr/local/cern/old/lib /usr/lib \
/usr/lib/cern /usr/local/lib /usr/local/lib/cern"
check_library "libpacklib packmd packlib" "$enable_shared" "${cernlibdir}" \
$cernlibdirs
packlib=$found_lib
packlibdir=$found_dir
check_library "libkernlib kernmd kernlib" "$enable_shared" "${cernlibdir}" \
$cernlibdirs
kernlib=$found_lib
kernlibdir=$found_dir
if test ! "x$packlib" = "x" && test "x$enable_rfio" = "xno" ; then
# check if libpacklib contains rfio references, if yes make further check
check_symbol rfio "$packlib" "$packlibdir"
if test $found_symbol -eq 1 ; then
# check if libpacklib contains rfio code (case of < 2002 version)
check_symbol rfio_connect "$packlib" "$packlibdir"
if test $found_symbol -eq 0 ; then
echo "### Need libshift with this version of $packlib"
echo "### Run configure with --enable-rfio or set --with-shift-libdir"
packlib=""
fi
fi
fi
if test "x$packlib" = "x" || test "x$kernlib" = "x"; then
enable_cern="no"
else
cernlib="$packlib $kernlib"
cernlibdir="$packlibdir $kernlibdir"
fi
fi
######################################################################
#
### echo %%% Pythia5 Usage - Third party libraries
#
# (See http://root.cern.ch and Lund)
#
# Check for libPythia
#
if test ! "x$enable_pythia" = "xno"; then
check_library "libPythia" "$enable_shared" "$pythialibdir" \
$PYTHIA $PYTHIA/lib /cern/pro/lib /opt/pythia /opt/pythia5 \
/usr/lib/pythia /usr/local/lib/pythia /usr/lib/pythia5 \
/usr/local/lib/pythia5 /usr/lib /usr/local/lib
pythialib=$found_lib
pythialibdir=$found_dir
if test "x$pythialib" = "x"; then
enable_pythia=no
fi
fi
######################################################################
#
### echo %%% Pythia6 Usage - Third party libraries
#
# (See http://root.cern.ch and Lund)
#
# Check for libPythia6
#
if test ! "x$enable_pythia6" = "xno" ; then
check_library "libPythia6" "$enable_shared" "$pythia6libdir" \
$PYTHIA6 $PYTHIA6/lib /cern/pro/lib /opt/pythia /opt/pythia6 \
/usr/lib/pythia /usr/local/lib/pythia /usr/lib/pythia6 \
/usr/local/lib/pythia6 /usr/lib /usr/local/lib
pythia6lib=$found_lib
pythia6libdir=$found_dir
if test "x$pythia6lib" = "x" ; then
enable_pythia6=no
fi
fi
######################################################################
#
### echo %%% Venus Usage - Third party libraries
#
# (See http://root.cern.ch)
#
# Check for libVenus
#
if test ! "x$enable_venus" = "xno" ; then
check_library "libVenus" "$enable_shared" "$venuslibdir" \
$VENUS $VENUS/lib /cern/pro/lib /opt/venus /usr/lib/venus \
/usr/local/lib/venus /usr/lib /usr/local/lib
venuslib=$found_lib
venuslibdir=$found_dir
if test "x$venuslib" = "x" ; then
enable_venus=no
fi
fi
######################################################################
#
### echo %%% dCache Support - Third party libraries
#
# (See http://www.dcache.org)
#
# Check for libdcap
#
if test ! "x$enable_dcache" = "xno" ; then
check_header "dcap.h" "$dcapincdir" $DCACHE $DCACHE/include \
/products/dcache/include \
/opt/dcache/include /usr/include /usr/local/include
dcapincdir=$found_dir
check_library "libdcap" "$enable_shared" "$dcaplibdir" $DCACHE $DCACHE/lib \
/products/dcache/lib /opt/dcache/lib /usr/lib /usr/local/lib
dcaplib=$found_lib
dcaplibdir=$found_dir
if test "x$dcapincdir" = "x" || test "x$dcaplib" = "x"; then
enable_dcache="no"
fi
fi
######################################################################
#
### echo %%% Chirp Support - Third party libraries
#
# (See http://www.cs.wisc.edu/condor/chirp)
#
# Check for libchirp_client
#
if test ! "x$enable_chirp" = "xno" ; then
check_header "chirp_client.h" "$chirpincdir" $CHIRP $CHIRP/include \
/opt/chirp/include /usr/include /usr/local/include
chirpincdir=$found_dir
#At this time, libchirp_client.a should always be prefered over .so,
#to avoid problems with linkage on grid execute machines.
check_library "libchirp_client" "no" "$chirplibdir" $CHIRP $CHIRP/lib \
/opt/chirp/lib /usr/lib /usr/local/lib
chirplib=$found_lib
chirplibdir=$found_dir
if test "x$chirpincdir" = "x" || test "x$chirplib" = "x"; then
enable_chirp="no"
fi
fi
######################################################################
#
### echo %%% AliEn Support - Third party libraries
#
# (See http://alien.cern.ch)
#
# Check for libAliEn
#
if test ! "x$enable_alien" = "xno" ; then
check_header "AliEn.h" "$alienincdir" $ALIEN $ALIEN/include \
/opt/alien/include /usr/local/alien/include /usr/include \
/usr/local/include
alienincdir=$found_dir
check_library "libAliEn" "$enable_shared" "$alienlibdir" \
$ALIEN $ALIEN/lib /opt/alien/lib /usr/local/alien/lib \
/usr/lib /usr/local/lib
alienlib=$found_lib
alienlibdir=$found_dir
if test "x$alienincdir" = "x" || test "x$alienlib" = "x"; then
enable_alien="no"
fi
fi
######################################################################
#
### echo %%% AfterImage Support - Third party libraries
#
# (See http://afterstep.sourceforge.net/afterimage/)
#
# Check for graphics libraries used by libAfterImage, like libjpeg, etc.
#
if test "x$platform" = "xwin32"; then
enable_asimage="no"
fi
if test ! "x$enable_asimage" = "xno" ; then
check_header "jpeglib.h" "" $ASIMAGE $ASIMAGE/include \
/usr/local/include /usr/include /opt/include /sw/include
asjpegincdir=$found_dir
check_header "png.h" "" $ASIMAGE $ASIMAGE/include \
/usr/local/include /usr/include /opt/include /sw/include
aspngincdir=$found_dir
check_header "tiffio.h" "" $ASIMAGE $ASIMAGE/include \
/usr/local/include /usr/include /opt/include /sw/include
astiffincdir=$found_dir
check_header "gif_lib.h" "" $ASIMAGE $ASIMAGE/include \
/usr/local/include /usr/include /opt/include /sw/include
asgifincdir=$found_dir
asextralib=""
asextralibdir=""
found_libz=""
found_dirz=""
# libz must be before libpng, if libz is not found don't
# add libpng which needs libz
for k in libjpeg libtiff libungif libz libpng ; do
check_library $k "$enable_shared" "" \
$ASIMAGE $ASIMAGE/lib /usr/local/lib /usr/lib /opt/lib /sw/lib
if test "x$k" = "xlibz" ; then
found_libz=$found_lib
found_dirz=$found_dir
continue;
fi
if test "x$k" = "xlibpng" && test "x$found_libz" = "x" ; then
break;
fi
if test ! "x$found_lib" = "x" ; then
asextralib="$asextralib $found_lib"
asextralibdir="$asextralibdir $found_dir"
fi
done
if test "x$asextralib" = "x" ; then
asextralib=""
asextralibdir=""
asjpegincdir=""
aspngincdir=""
astiffincdir=""
asgifincdir=""
enable_asimage="no"
else
asextralib="$asextralib $found_libz"
asextralibdir="$asextralibdir $found_dirz"
fi
fi
######################################################################
#
### echo %%% LDAP Support - Third party libraries
#
# (See openldap.org)
#
# If the user has set the flags "--disable-ldap", we don't check for
# LDAP at all.
#
if test ! "x$enable_ldap" = "xno"; then
# Check for ldap include and library
check_header "ldap.h" "$ldapincdir" $LDAP $LDAP/include \
/usr/include /usr/local/include /usr/local/ldap/include \
/usr/include/ldap /usr/include/openldap /usr/ldap/include \
/usr/local/include/ldap /usr/local/include/openldap \
/usr/ldap /usr/local/ldap /opt/ldap /opt/ldap/include
ldapinc=$found_hdr
ldapincdir=$found_dir
ldaplib=""
ldaplibdir=""
for i in libldap liblber ; do
check_library $i "$enable_shared" "" $ldaplibdir \
$LDAP $LDAP/lib /usr/local/ldap/lib /usr/local/lib \
/usr/lib/ldap /usr/local/lib/ldap /usr/ldap/lib /usr/lib \
/usr/ldap /usr/local/ldap /opt/ldap /opt/ldap/lib
if test "x$found_lib" = "x" ; then
ldaplib=""
ldaplibdir=""
enable_ldap="no"
break
fi
ldaplib="$ldaplib $found_lib"
ldaplibdir="$ldaplibdir $found_dir"
done
if test "x$ldapincdir" = "x" || test "x$ldaplib" = "x"; then
enable_ldap="no"
fi
fi
######################################################################
#
### echo %%% SRP Support - Third party libraries
#
# (see http://srp.stanford.edu/srp)
# Note: You can not make do with the libsrp package. You need the full
# source for this add-on.
#
# Check for SRP (libsrp.a)
#
if test ! "x$enable_srp" = "xno" ; then
if test "x$srpincdir" = "x" && test ! "x$srpdir" = "x" ; then
srpincdir=$srpdir/include
if test ! -d $srpincdir ; then
srpincdir=$srpdir/libsrp
fi
fi
check_header "t_server.h" "$srpincdir" $SRP/include $SRP/libsrp \
/usr/srp/include /usr/include /usr/local/include /usr/local/srp/include
srpinc=$found_hdr
srpincdir=$found_dir
if test "x$srpincdir" = "x" ; then
enable_srp="no"
fi
if test "x$srplibdir" = "x" && test ! "x$srpdir" = "x" ; then
srplibdir=$srpdir/lib
if test ! -d $srplibdir ; then
srplibdir=$srpdir/libsrp
fi
fi
srplibdirs="$SRP $SRP/lib $SRP/libsrp /usr/srp/lib /usr/local/srp/lib \
/usr/lib/srp /usr/local/lib/srp /usr/lib /usr/local/lib"
check_library "libsrp" "no" "$srplibdir" $srplibdirs
srplib=$found_lib
srplibdir=$found_dir
check_symbol BN_new "$srplib" "$srplibdir"
if test $found_symbol -eq 0 ; then
check_library "libgmp" "$enable_shared" "" $srplibdir $srplibdirs
gmplib=$found_lib
gmplibdir=$found_dir
else
check_library "libcrypto" "$enable_shared" "" $srplibdir $srplibdirs
gmplib=$found_lib
gmplibdir=$found_dir
if test -r $gmplib && test "x$enable_shared" = "xno" ; then
case $arch in
linux*) gmplib="$gmplib -ldl"
esac
fi
fi
if test "x$srplib" = "x" ; then
enable_srp="no"
srplibdir=""
elif test "x$gmplib" = "x" ; then
enable_srp="no"
gmplibdir=""
else
srplib="$srplib $gmplib"
srplibdir="$srplibdir $gmplibdir"
case $arch in
linux*) srplib="$srplib -lcrypt" ;;
esac
fi
srputillib=""
srputillibdir=""
for i in base/libmisc/libmisc base/lib/libshadow ; do
check_library "$i" "no" "$srpdir" $srplibdirs
if test "x$found_lib" = "x" ; then
srputillib=""
srputillibdir=""
enable_srp="no"
break
fi
srputillib="$srputillib $found_lib"
srputillibdir="$srputillibdir $found_dir"
done
if test ! "x$srpdir" = "x" ; then
srputilincdir=$srpdir/base/lib
fi
check_header "pwauth.h" "$srputilincdir" $SRP $SRP/base/lib \
/usr/srp/base/lib /usr/local/srp/base/lib
srputilincdir=$found_dir
if test "x$srputilincdir" = "x" ; then
enable_srp="no"
fi
if test "x$enable_srp" = "xno" ; then
srplib=""
srputillib=""
fi
fi
######################################################################
#
### echo %%% AFS Support - Third party libraries
#
# (See http://www.openafs.org)
#
# Check for AFS (libdes.a)
#
if test ! "x$enable_afs" = "xno" ; then
if test ! "x$afsdir" = "x" ; then
afsdir="$afsdir $afsdir/afs"
fi
afslibdirs="$AFS/lib /usr/afsws/lib /usr/local/afsws/lib \
/opt/afs/lib /usr/local/afs/lib /usr/lib /usr/local/lib \
/usr/athena/lib /usr/local/athena/lib"
afslib=""
afslibdir=""
for i in afs/libkauth afs/libprot afs/libauth afs/libsys afs/libcmd \
afs/libcom_err afs/libaudit afs/util libubik librx librxkad \
liblwp libafsrpc libdes ; do
check_library "$i" "no" "$afsdir" $afslibdirs
if test "x$found_lib" = "x" ; then
afslib=""
afslibdir=""
enable_afs="no"
break
fi
afslib="$afslib $found_lib"
afslibdir="$afslibdir $found_dir"
done
if test "x$afslib" = "x" ; then
enable_afs="no"
fi
fi
######################################################################
#
### echo %%% krb5 Support - Third party libraries
#
#
# Check for krb5 (libkrb5.a)
#
if test ! "x$enable_krb5" = "xno" ; then
krb5incdir=""
krb5libdirorg=""
if test ! "x$krb5dir" = "x" ; then
krb5incdir=$krb5dir/include
krb5libdirorg=$krb5dir/lib
fi
check_header "krb5.h" "$krb5incdir" /usr/athena/include \
/usr/local/athena/include /usr/kerberos/include \
/usr/krb5/include /usr/local/kerberos/include \
/usr/include /usr/local/include
krb5inc=$found_hdr
krb5incdir=$found_dir
krb5libdirs="/usr/athena/lib /usr/local/athena/lib /usr/kerberos/lib \
/usr/krb5/lib /usr/local/kerberos/lib /usr/lib /usr/local/lib"
# check whether using MIT krb5
krb5mit=yes
check_library libk5crypto "no" "$krb5libdirorg" $krb5libdirs
if test "x$found_lib" = "x" ; then
krb5mit=no
fi
krb5lib=""
krb5libdir=""
if test $krb5mit = yes ; then
for i in libkrb5 libcom_err libss libk5crypto; do
check_library $i "no" "$krb5libdirorg" $krb5libdirs
if test "x$found_lib" = "x" ; then
krb5lib=""
krb5libdir=""
enable_krb5="no"
break
fi
krb5lib="$krb5lib $found_lib"
krb5libdir="$krb5libdir $found_dir"
done
else
for i in libkrb5 libcom_err libcrypto ; do
check_library $i "no" "$krb5libdirorg" $krb5libdirs
if test "x$found_lib" = "x" ; then
krb5lib=""
krb5libdir=""
enable_krb5="no"
break
fi
krb5lib="$krb5lib $found_lib"
krb5libdir="$krb5libdir $found_dir"
done
fi
# on linux, the resolver lives in a separate library
if test ! "x$krb5lib" = "x" ; then
case $arch in
linux*) krb5lib="$krb5lib -lresolv" ;;
esac
fi
if test "x$krb5lib" = "x" || test "x$krb5incdir" = "x" ; then
enable_krb5="no"
fi
fi
######################################################################
#
### echo %%% Shadow password support
#
checking_msg "shadow passwords"
if test "x$enable_shadowpw" = "x"; then
if test -f "/etc/shadow"; then
enable_shadowpw="yes"
else
enable_shadowpw="no"
fi
fi
if test "x$enable_shadowpw" = "xyes"; then
shadowpw="-DR__SHADOWPW "
fi
echo $enable_shadowpw
######################################################################
#
### echo %%% Table Library - Contributed library
#
message "Checking whether to build libTable"
if test "x$enable_table" = "xyes" || test ! "x$TABLE" = "x"; then
enable_table="1"
echo "yes"
else
enable_table=""
echo "no"
fi
######################################################################
#
### echo %%% Debian or Red Hat package list
#
# If we're asked to build for a set of RPMs or Debian packages, we
# make a list of the packages it's possible for us to build on this
# system.
#
if test "x$show_pkglist" = "xyes" ; then
pkglist="root-daemon"
test "x$enable_cern" = "xyes" && pkglist="$pkglist root-zebra"
if test "x$enable_openiv" = "xyes" ; then
pkglist="$pkglist root-gliv"
elif test "x$enable_opengl" = "xyes" ; then
pkglist="$pkglist root-gl"
fi
test "x$enable_mysql" = "xyes" && pkglist="$pkglist root-mysql"
test "x$enable_pgsql" = "xyes" && pkglist="$pkglist root-pgsql"
test "x$enable_sapdb" = "xyes" && pkglist="$pkglist root-sapdb"
test "x$enable_pythia" = "xyes" && test "x$enable_pythia6" = "xyes" && pkglist="$pkglist root-pythia"
test "x$enable_rfio" = "xyes" && pkglist="$pkglist root-shift"
test "x$enable_srputil" = "xyes" && pkglist="$pkglist root-srp"
pkglist="$pkglist root-cint root-doc libroot-dev root-bin libroot"
# If we're called from the package preparation script, then
# print out the package list and exit
echo "packages: $pkglist"
exit 0
fi
######################################################################
#
### echo %%% check for setresuid and setresgid
#
setresuid="undef"
case $arch in
linux*)
message "Checking whether setresuid declared in /usr/include/unistd.h"
if `grep setresuid /usr/include/unistd.h >/dev/null 2>&1` ; then
setresuid="define"
echo "yes"
else
echo "no"
fi ;;
esac
######################################################################
#
### echo %%% Exit here if this is a dry run
#
if test "x$noact" = "xyes" ; then
exit 0
fi
######################################################################
#
### echo %%% Create needed directories
#
if test ! -d include ; then
message "Creating include"
mkdir include
echo "done"
fi
if test ! -d bin ; then
message "Creating bin"
mkdir bin
echo "done"
fi
if test ! -d lib ; then
message "Creating lib"
mkdir lib
echo "done"
fi
######################################################################
#
### echo %%% Cleanup obsolete links and files
#
if test -h opengl ; then
rm -f opengl
fi
if test -h ttf ; then
rm -f ttf
fi
if test -f system.rootrc ; then
rm -f system.rootrc
fi
if test -d new ; then
rm -rf new
fi
if test -d star ; then
rm -rf star
fi
######################################################################
#
### echo %%% Fleshin out paths
#
# First win32 does not support -L in ldflags, so remove @ldflags@.
#
if test "$platform" = "win32" ; then
sed -e "s|@ldflags@||" \
< Makefile.tmp > Makefile.tmpp
mv Makefile.tmpp Makefile.tmp
fi
if test ! "x$haveconfig" = "x" ; then
##################################################################
#
### echo %%% Static directory build.
#
if test "x$prefix" = "x"; then prefix=/usr/local; fi
if test "x$bindir" = "x"; then bindir=$prefix/bin; fi
if test "x$libdir" = "x"; then libdir=$prefix/lib/root; fi
if test "x$incdir" = "x"; then incdir=$prefix/include/root; fi
if test "x$etcdir" = "x"; then etcdir=/etc/root; fi
if test "x$mandir" = "x"; then mandir=$prefix/share/man/man1; fi
if test "x$datadir" = "x"; then datadir=$prefix/share/root; fi
if test "x$proofdir" = "x"; then proofdir=$datadir/proof; fi
if test "x$macrodir" = "x"; then macrodir=$datadir/macros; fi
if test "x$cintincdir" = "x"; then cintincdir=$datadir/cint; fi
if test "x$iconpath" = "x"; then iconpath=$datadir/icons; fi
if test "x$srcdir" = "x"; then srcdir=$datadir/src; fi
if test "x$fontdir" = "x"; then fontdir=$datadir/fonts; fi
if test "x$docdir" = "x"; then docdir=$prefix/share/doc/root; fi
if test "x$testdir" = "x"; then testdir=$docdir/test; fi
if test "x$tutdir" = "x"; then tutdir=$docdir/tutorials; fi
if test "x$aclocaldir" = "x"; then aclocaldir=$prefix/share/aclocal; fi
if test "x$elispdir" = "x"; then elispdir=$prefix/share/emacs/site-lisp; fi
if test "x$enable_rpath" = "xyes" ; then
if test "$platform" = "solarisCC5"; then
sed -e "s|@ldflags@|-R$libdir @ldflags@|" \
< Makefile.tmp > Makefile.tmpp
else
sed -e "s|@ldflags@|-Wl,-rpath,$libdir @ldflags@|" \
< Makefile.tmp > Makefile.tmpp
fi
mv Makefile.tmpp Makefile.tmp
fi
sed -e "s|@useconfig@|TRUE|" \
-e "s|@cflags@|-DHAVE_CONFIG|" \
< Makefile.tmp > Makefile.tmpp
mv Makefile.tmpp Makefile.tmp
else
##################################################################
#
### echo %%% Environment driven build. Escape sequences very important
#
prefix=\$\(ROOTSYS\)
bindir=\$\(ROOTSYS\)/bin
libdir=\$\(ROOTSYS\)/lib
incdir=\$\(ROOTSYS\)/include
etcdir=\$\(ROOTSYS\)/etc
datadir=\$\(ROOTSYS\)
mandir=\$\(ROOTSYS\)/man/man1
proofdir=\$\(ROOTSYS\)/proof
macrodir=\$\(ROOTSYS\)/macros
cintincdir=\$\(ROOTSYS\)/cint
iconpath=\$\(ROOTSYS\)/icons
srcdir=\$\(ROOTSYS\)/src
fontdir=\$\(ROOTSYS\)/fonts
docdir=\$\(ROOTSYS\)
testdir=\$\(ROOTSYS\)/test
tutdir=\$\(ROOTSYS\)/tutorials
aclocaldir=\$\(ROOTSYS\)/build/misc
elispdir=\$\(ROOTSYS\)/build/misc
# when using rpath in this case build product is not relocatable
if test "x$enable_rpath" = "xyes" ; then
if test "$platform" = "solarisCC5"; then
sed -e "s|@ldflags@|-R$libdir @ldflags@|" \
< Makefile.tmp > Makefile.tmpp
else
sed -e "s|@ldflags@|-Wl,-rpath,$libdir @ldflags@|" \
< Makefile.tmp > Makefile.tmpp
fi
mv Makefile.tmpp Makefile.tmp
fi
sed -e "s|@useconfig@|FALSE|" \
-e "s|@cflags@||" \
-e "s|@ldflags@||" \
< Makefile.tmp > Makefile.tmpp
mv Makefile.tmpp Makefile.tmp
fi
######################################################################
#
### echo %%% Writing files
#
#---------------------------------------------------------------------
# config/Makefile.config
#
message "Writing $MAKEOUT"
sed \
-e "s|@aclocaldir@|$aclocaldir|" \
-e "s|@afslib@|$afslib|" \
-e "s|@afslibdir@|$afslibdir|" \
-e "s|@alienincdir@|$alienincdir|" \
-e "s|@alienlib@|$alienlib|" \
-e "s|@alienlibdir@|$alienlibdir|" \
-e "s|@architecture@|$arch|" \
-e "s|@asextralib@|$asextralib|" \
-e "s|@asextralibdir@|$asextralibdir|" \
-e "s|@asjpegincdir@|$asjpegincdir|" \
-e "s|@aspngincdir@|$aspngincdir|" \
-e "s|@astiffincdir@|$astiffincdir|" \
-e "s|@asgifincdir@|$asgifincdir|" \
-e "s|@bindir@|$bindir|" \
-e "s|@buildasimage@|$enable_asimage|" \
-e "s|@cernlibdir@|$cernlibdir|" \
-e "s|@cernlibs@|$cernlib|" \
-e "s|@chirpincdir@|$chirpincdir|" \
-e "s|@chirplib@|$chirplib|" \
-e "s|@chirplibdir@|$chirplibdir|" \
-e "s|@cintincdir@|$cintincdir|" \
-e "s|@datadir@|$datadir|" \
-e "s|@dcapincdir@|$dcapincdir|" \
-e "s|@dcaplib@|$dcaplib|" \
-e "s|@dcaplibdir@|$dcaplibdir|" \
-e "s|@docdir@|$docdir|" \
-e "s|@elispdir@|$elispdir|" \
-e "s|@enable_table@|$enable_table|" \
-e "s|@enable_thread@|$enable_thread|" \
-e "s|@etcdir@|$etcdir|" \
-e "s|@exceptions@|$enable_exceptions|" \
-e "s|@explicitlink@|$enable_explicitlink|" \
-e "s|@iconpath@|$iconpath|" \
-e "s|@incdir@|$incdir|" \
-e "s|@krb5incdir@|$krb5incdir|" \
-e "s|@krb5lib@|$krb5lib|" \
-e "s|@krb5libdir@|$krb5libdir|" \
-e "s|@ldapincdir@|$ldapincdir|" \
-e "s|@ldaplib@|$ldaplib|" \
-e "s|@ldaplibdir@|$ldaplibdir|" \
-e "s|@ldflags@||" \
-e "s|@libdir@|$libdir|" \
-e "s|@macrodir@|$macrodir|" \
-e "s|@mandir@|$mandir|" \
-e "s|@mkliboption@|$mkliboption|" \
-e "s|@mysqlincdir@|$mysqlincdir|" \
-e "s|@mysqllib@|$mysqllib|" \
-e "s|@mysqllibdir@|$mysqllibdir|" \
-e "s|@openglincdir@|$openglincdir|" \
-e "s|@opengllib@|$opengllib|" \
-e "s|@opengllibdir@|$opengllibdir|" \
-e "s|@openglulib@|$openglulib|" \
-e "s|@openivincdir@|$openivincdir|" \
-e "s|@openivlib@|$openivlib|" \
-e "s|@openivlibdir@|$openivlibdir|" \
-e "s|@pgsqlincdir@|$pgsqlincdir|" \
-e "s|@pgsqllib@|$pgsqllib|" \
-e "s|@pgsqllibdir@|$pgsqllibdir|" \
-e "s|@proofdir@|$proofdir|" \
-e "s|@pythia6lib@|$pythia6lib|" \
-e "s|@pythia6libdir@|$pythia6libdir|" \
-e "s|@pythialib@|$pythialib|" \
-e "s|@pythialibdir@|$pythialibdir|" \
-e "s|@qtincdir@|$qtincdir|" \
-e "s|@qtlib@|$qtlib|" \
-e "s|@qtlibdir@|$qtlibdir|" \
-e "s|@rootbuild@|$rootbuild|" \
-e "s|@sapdbincdir@|$sapdbincdir|" \
-e "s|@sapdblib@|$sapdblib|" \
-e "s|@sapdblibdir@|$sapdblibdir|" \
-e "s|@shadowpw@|$shadowpw|" \
-e "s|@shiftlib@|$shiftlib|" \
-e "s|@shiftlibdir@|$shiftlibdir|" \
-e "s|@srcdir@|$srcdir|" \
-e "s|@srpincdir@|$srpincdir|" \
-e "s|@srplib@|$srplib|" \
-e "s|@srplibdir@|$srplibdir|" \
-e "s|@srputilincdir@|$srputilincdir|" \
-e "s|@srputillib@|$srputillib|" \
-e "s|@srputillibdir@|$srputillibdir|" \
-e "s|@testdir@|$testdir|" \
-e "s|@threadlib@|$threadlib|" \
-e "s|@threadlibdir@|$threadlibdir|" \
-e "s|@ttffontdir@|$fontdir|" \
-e "s|@tutdir@|$tutdir|" \
-e "s|@venuslib@|$venuslib|" \
-e "s|@venuslibdir@|$venuslibdir|" \
-e "s|@x11libdir@|$x11libdir|" \
-e "s|@xpmlib@|$xpmlib|" \
-e "s|@xpmlibdir@|$xpmlibdir|" \
< Makefile.tmp > $MAKEOUT
rm -f Makefile.tmp
echo "done"
#---------------------------------------------------------------------
# include/config.h
#
message "Writing $CONFOUT"
sed \
-e "s|@architecture@|$arch|" \
-e "s|@bindir@|$bindir|" \
-e "s|@cintincdir@|$cintincdir|" \
-e "s|@datadir@|$datadir|" \
-e "s|@etcdir@|$etcdir|" \
-e "s|@extraiconpath@|$extraiconpath|" \
-e "s|@iconpath@|$iconpath|" \
-e "s|@incdir@|$incdir|" \
-e "s|@libdir@|$libdir|" \
-e "s|@macrodir@|$macrodir|" \
-e "s|@prefix@|$prefix|" \
-e "s|@srcdir@|$srcdir|" \
-e "s|@ttffontdir@|$fontdir|" \
-e "s|@setresuid@|$setresuid|" \
< config.tmp > $CONFOUT
rm -f config.tmp
echo "done"
#---------------------------------------------------------------------
# bin/root-config
#
message "Writing $RCONFOUT"
prefix2=$prefix
incdir2=$incdir
libdir2=$libdir
if test "$prefix2" = "\$(ROOTSYS)" ; then
prefix2=\$ROOTSYS
libdir2=\$ROOTSYS/lib
incdir2=\$ROOTSYS/include
fi
features=""
for f in $options ; do
bar="$`echo $f`"
if test "x`eval echo $bar`" = "xyes" ; then
feat=`echo $f | sed 's/enable_//'`
features="$features $feat"
fi
done
sed -e "s|@architecture@|$arch|" \
-e "s|@prefix@|$prefix2|" \
-e "s|@incdir@|$incdir2|" \
-e "s|@libdir@|$libdir2|" \
-e "s|@features@|$features|" \
< root-config.tmp > $RCONFOUT
rm -f root-config.tmp
chmod 755 $RCONFOUT
echo "done"
#---------------------------------------------------------------------
# etc/system.rootrc
#
message "Writing $ROOTRCOUT"
sed -e "s|@libdir@|$libdir|" \
-e "s|@macrodir@|$macrodir|" \
-e "s|@bindir@|$bindir|" \
-e "s|@etcdir@|$etcdir|" \
-e "s|@ttffontdir@|$fontdir|" \
-e "s|@iconpath@|$iconpath|" \
< rootrc.tmp > $ROOTRCOUT
rm -f rootrc.tmp
echo "done"
#---------------------------------------------------------------------
# etc/root.mimes
#
message "Writing $MIMEOUT"
if test "$platform" = "win32" ; then
cp -f $MIMEWIN32IN $MIMEOUT
else
cp -f $MIMEUNIXIN $MIMEOUT
fi
echo "done"
#---------------------------------------------------------------------
# bin/memprobe
#
message "Writing $MEMPROBEOUT"
if test -x /usr/bin/env ; then
perlexe="/usr/bin/env perl"
else
perlexe=`which perl`
fi
sed -e "s|@perl@|$perlexe|" \
< memprobe.tmp > $MEMPROBEOUT
rm -f memprobe.tmp
chmod 755 $MEMPROBEOUT
echo "done"
#---------------------------------------------------------------------
# build/misc/root-help.el
#
message "Writing build/misc/root-help.el"
sed -e "s|@bindir@|$bindir|" \
-e "s|@incdir@|$incdir|" \
< config/root-help.el.in > build/misc/root-help.el
echo "done"
######################################################################
#
# FAT conversion in test/tutorials
#
# On win32 convert all files in tutorials and test to \r\n convention
# (only if CVS directory does not exist, otherwise cvs will already
# have made the conversion).
#
if test "x$platform" = "xwin32" && test ! -d CVS ; then
message "Converting files in tutorials and test to DOS format"
for i in tutorials/*.C tutorials/*.sql test/*.cxx test/*.h \
test/Makefile* test/README etc/system.rootrc
do
sed 's/$//' $i > r__tmp
touch -r $i r__tmp
mv -f r__tmp $i
done
echo "done"
fi
######################################################################
#
# Warning about recommended build options
#
echo ""
if test "x$enable_opengl" = "xno" ; then
echo "To build the ROOT OpenGL add-on library see README/INSTALL."
echo ""
echo ""
fi
######################################################################
#
### echo %%% Final instructions
#
# List the possible Makefiles
#
echo "To build ROOT type:"
echo ""
if test "x$platform" = "xwin32" || test "x$platform" = "xwin32gcc" ; then
echo " make"
if test ! "x$haveconfig" = "x" ; then
echo " make install"
fi
else
echo " gmake"
if test ! "x$haveconfig" = "x" ; then
echo " gmake install"
fi
fi
echo ""
exit 0
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...