Revision 7f0801e566cc78315e5dc383bf3c3b5b5b436048 authored by Damien Lespiau on 05 February 2015, 19:35:13 UTC, committed by Jani Nikula on 18 March 2015, 08:09:05 UTC
We don't want to end up in a state where we track that the pipe has its primary plane enabled when primary plane registers are programmed with values that look possible but the plane actually disabled. Refuse to read out the fb state when the primary plane isn't enabled. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Reference: http://mid.gmane.org/20150203191507.GA2374@crion86 Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
1 parent 319c1d4
amba-clcd.c
/*
* linux/drivers/video/amba-clcd.c
*
* Copyright (C) 2001 ARM Limited, by David A Rusling
* Updated to 2.5, Deep Blue Solutions Ltd.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*
* ARM PrimeCell PL110 Color LCD Controller
*/
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/list.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/hardirq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_graph.h>
#include <video/display_timing.h>
#include <video/of_display_timing.h>
#include <video/videomode.h>
#include <asm/sizes.h>
#define to_clcd(info) container_of(info, struct clcd_fb, fb)
/* This is limited to 16 characters when displayed by X startup */
static const char *clcd_name = "CLCD FB";
/*
* Unfortunately, the enable/disable functions may be called either from
* process or IRQ context, and we _need_ to delay. This is _not_ good.
*/
static inline void clcdfb_sleep(unsigned int ms)
{
if (in_atomic()) {
mdelay(ms);
} else {
msleep(ms);
}
}
static inline void clcdfb_set_start(struct clcd_fb *fb)
{
unsigned long ustart = fb->fb.fix.smem_start;
unsigned long lstart;
ustart += fb->fb.var.yoffset * fb->fb.fix.line_length;
lstart = ustart + fb->fb.var.yres * fb->fb.fix.line_length / 2;
writel(ustart, fb->regs + CLCD_UBAS);
writel(lstart, fb->regs + CLCD_LBAS);
}
static void clcdfb_disable(struct clcd_fb *fb)
{
u32 val;
if (fb->board->disable)
fb->board->disable(fb);
val = readl(fb->regs + fb->off_cntl);
if (val & CNTL_LCDPWR) {
val &= ~CNTL_LCDPWR;
writel(val, fb->regs + fb->off_cntl);
clcdfb_sleep(20);
}
if (val & CNTL_LCDEN) {
val &= ~CNTL_LCDEN;
writel(val, fb->regs + fb->off_cntl);
}
/*
* Disable CLCD clock source.
*/
if (fb->clk_enabled) {
fb->clk_enabled = false;
clk_disable(fb->clk);
}
}
static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
{
/*
* Enable the CLCD clock source.
*/
if (!fb->clk_enabled) {
fb->clk_enabled = true;
clk_enable(fb->clk);
}
/*
* Bring up by first enabling..
*/
cntl |= CNTL_LCDEN;
writel(cntl, fb->regs + fb->off_cntl);
clcdfb_sleep(20);
/*
* and now apply power.
*/
cntl |= CNTL_LCDPWR;
writel(cntl, fb->regs + fb->off_cntl);
/*
* finally, enable the interface.
*/
if (fb->board->enable)
fb->board->enable(fb);
}
static int
clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
{
u32 caps;
int ret = 0;
if (fb->panel->caps && fb->board->caps)
caps = fb->panel->caps & fb->board->caps;
else {
/* Old way of specifying what can be used */
caps = fb->panel->cntl & CNTL_BGR ?
CLCD_CAP_BGR : CLCD_CAP_RGB;
/* But mask out 444 modes as they weren't supported */
caps &= ~CLCD_CAP_444;
}
/* Only TFT panels can do RGB888/BGR888 */
if (!(fb->panel->cntl & CNTL_LCDTFT))
caps &= ~CLCD_CAP_888;
memset(&var->transp, 0, sizeof(var->transp));
var->red.msb_right = 0;
var->green.msb_right = 0;
var->blue.msb_right = 0;
switch (var->bits_per_pixel) {
case 1:
case 2:
case 4:
case 8:
/* If we can't do 5551, reject */
caps &= CLCD_CAP_5551;
if (!caps) {
ret = -EINVAL;
break;
}
var->red.length = var->bits_per_pixel;
var->red.offset = 0;
var->green.length = var->bits_per_pixel;
var->green.offset = 0;
var->blue.length = var->bits_per_pixel;
var->blue.offset = 0;
break;
case 16:
/* If we can't do 444, 5551 or 565, reject */
if (!(caps & (CLCD_CAP_444 | CLCD_CAP_5551 | CLCD_CAP_565))) {
ret = -EINVAL;
break;
}
/*
* Green length can be 4, 5 or 6 depending whether
* we're operating in 444, 5551 or 565 mode.
*/
if (var->green.length == 4 && caps & CLCD_CAP_444)
caps &= CLCD_CAP_444;
if (var->green.length == 5 && caps & CLCD_CAP_5551)
caps &= CLCD_CAP_5551;
else if (var->green.length == 6 && caps & CLCD_CAP_565)
caps &= CLCD_CAP_565;
else {
/*
* PL110 officially only supports RGB555,
* but may be wired up to allow RGB565.
*/
if (caps & CLCD_CAP_565) {
var->green.length = 6;
caps &= CLCD_CAP_565;
} else if (caps & CLCD_CAP_5551) {
var->green.length = 5;
caps &= CLCD_CAP_5551;
} else {
var->green.length = 4;
caps &= CLCD_CAP_444;
}
}
if (var->green.length >= 5) {
var->red.length = 5;
var->blue.length = 5;
} else {
var->red.length = 4;
var->blue.length = 4;
}
break;
case 32:
/* If we can't do 888, reject */
caps &= CLCD_CAP_888;
if (!caps) {
ret = -EINVAL;
break;
}
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
break;
default:
ret = -EINVAL;
break;
}
/*
* >= 16bpp displays have separate colour component bitfields
* encoded in the pixel data. Calculate their position from
* the bitfield length defined above.
*/
if (ret == 0 && var->bits_per_pixel >= 16) {
bool bgr, rgb;
bgr = caps & CLCD_CAP_BGR && var->blue.offset == 0;
rgb = caps & CLCD_CAP_RGB && var->red.offset == 0;
if (!bgr && !rgb)
/*
* The requested format was not possible, try just
* our capabilities. One of BGR or RGB must be
* supported.
*/
bgr = caps & CLCD_CAP_BGR;
if (bgr) {
var->blue.offset = 0;
var->green.offset = var->blue.offset + var->blue.length;
var->red.offset = var->green.offset + var->green.length;
} else {
var->red.offset = 0;
var->green.offset = var->red.offset + var->red.length;
var->blue.offset = var->green.offset + var->green.length;
}
}
return ret;
}
static int clcdfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct clcd_fb *fb = to_clcd(info);
int ret = -EINVAL;
if (fb->board->check)
ret = fb->board->check(fb, var);
if (ret == 0 &&
var->xres_virtual * var->bits_per_pixel / 8 *
var->yres_virtual > fb->fb.fix.smem_len)
ret = -EINVAL;
if (ret == 0)
ret = clcdfb_set_bitfields(fb, var);
return ret;
}
static int clcdfb_set_par(struct fb_info *info)
{
struct clcd_fb *fb = to_clcd(info);
struct clcd_regs regs;
fb->fb.fix.line_length = fb->fb.var.xres_virtual *
fb->fb.var.bits_per_pixel / 8;
if (fb->fb.var.bits_per_pixel <= 8)
fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
else
fb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
fb->board->decode(fb, ®s);
clcdfb_disable(fb);
writel(regs.tim0, fb->regs + CLCD_TIM0);
writel(regs.tim1, fb->regs + CLCD_TIM1);
writel(regs.tim2, fb->regs + CLCD_TIM2);
writel(regs.tim3, fb->regs + CLCD_TIM3);
clcdfb_set_start(fb);
clk_set_rate(fb->clk, (1000000000 / regs.pixclock) * 1000);
fb->clcd_cntl = regs.cntl;
clcdfb_enable(fb, regs.cntl);
#ifdef DEBUG
printk(KERN_INFO
"CLCD: Registers set to\n"
" %08x %08x %08x %08x\n"
" %08x %08x %08x %08x\n",
readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
readl(fb->regs + fb->off_ienb), readl(fb->regs + fb->off_cntl));
#endif
return 0;
}
static inline u32 convert_bitfield(int val, struct fb_bitfield *bf)
{
unsigned int mask = (1 << bf->length) - 1;
return (val >> (16 - bf->length) & mask) << bf->offset;
}
/*
* Set a single color register. The values supplied have a 16 bit
* magnitude. Return != 0 for invalid regno.
*/
static int
clcdfb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
unsigned int blue, unsigned int transp, struct fb_info *info)
{
struct clcd_fb *fb = to_clcd(info);
if (regno < 16)
fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) |
convert_bitfield(blue, &fb->fb.var.blue) |
convert_bitfield(green, &fb->fb.var.green) |
convert_bitfield(red, &fb->fb.var.red);
if (fb->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
int hw_reg = CLCD_PALETTE + ((regno * 2) & ~3);
u32 val, mask, newval;
newval = (red >> 11) & 0x001f;
newval |= (green >> 6) & 0x03e0;
newval |= (blue >> 1) & 0x7c00;
/*
* 3.2.11: if we're configured for big endian
* byte order, the palette entries are swapped.
*/
if (fb->clcd_cntl & CNTL_BEBO)
regno ^= 1;
if (regno & 1) {
newval <<= 16;
mask = 0x0000ffff;
} else {
mask = 0xffff0000;
}
val = readl(fb->regs + hw_reg) & mask;
writel(val | newval, fb->regs + hw_reg);
}
return regno > 255;
}
/*
* Blank the screen if blank_mode != 0, else unblank. If blank == NULL
* then the caller blanks by setting the CLUT (Color Look Up Table) to all
* black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due
* to e.g. a video mode which doesn't support it. Implements VESA suspend
* and powerdown modes on hardware that supports disabling hsync/vsync:
* blank_mode == 2: suspend vsync
* blank_mode == 3: suspend hsync
* blank_mode == 4: powerdown
*/
static int clcdfb_blank(int blank_mode, struct fb_info *info)
{
struct clcd_fb *fb = to_clcd(info);
if (blank_mode != 0) {
clcdfb_disable(fb);
} else {
clcdfb_enable(fb, fb->clcd_cntl);
}
return 0;
}
static int clcdfb_mmap(struct fb_info *info,
struct vm_area_struct *vma)
{
struct clcd_fb *fb = to_clcd(info);
unsigned long len, off = vma->vm_pgoff << PAGE_SHIFT;
int ret = -EINVAL;
len = info->fix.smem_len;
if (off <= len && vma->vm_end - vma->vm_start <= len - off &&
fb->board->mmap)
ret = fb->board->mmap(fb, vma);
return ret;
}
static struct fb_ops clcdfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = clcdfb_check_var,
.fb_set_par = clcdfb_set_par,
.fb_setcolreg = clcdfb_setcolreg,
.fb_blank = clcdfb_blank,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_mmap = clcdfb_mmap,
};
static int clcdfb_register(struct clcd_fb *fb)
{
int ret;
/*
* ARM PL111 always has IENB at 0x1c; it's only PL110
* which is reversed on some platforms.
*/
if (amba_manf(fb->dev) == 0x41 && amba_part(fb->dev) == 0x111) {
fb->off_ienb = CLCD_PL111_IENB;
fb->off_cntl = CLCD_PL111_CNTL;
} else {
#ifdef CONFIG_ARCH_VERSATILE
fb->off_ienb = CLCD_PL111_IENB;
fb->off_cntl = CLCD_PL111_CNTL;
#else
fb->off_ienb = CLCD_PL110_IENB;
fb->off_cntl = CLCD_PL110_CNTL;
#endif
}
fb->clk = clk_get(&fb->dev->dev, NULL);
if (IS_ERR(fb->clk)) {
ret = PTR_ERR(fb->clk);
goto out;
}
ret = clk_prepare(fb->clk);
if (ret)
goto free_clk;
fb->fb.device = &fb->dev->dev;
fb->fb.fix.mmio_start = fb->dev->res.start;
fb->fb.fix.mmio_len = resource_size(&fb->dev->res);
fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
if (!fb->regs) {
printk(KERN_ERR "CLCD: unable to remap registers\n");
ret = -ENOMEM;
goto clk_unprep;
}
fb->fb.fbops = &clcdfb_ops;
fb->fb.flags = FBINFO_FLAG_DEFAULT;
fb->fb.pseudo_palette = fb->cmap;
strncpy(fb->fb.fix.id, clcd_name, sizeof(fb->fb.fix.id));
fb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
fb->fb.fix.type_aux = 0;
fb->fb.fix.xpanstep = 0;
fb->fb.fix.ypanstep = 0;
fb->fb.fix.ywrapstep = 0;
fb->fb.fix.accel = FB_ACCEL_NONE;
fb->fb.var.xres = fb->panel->mode.xres;
fb->fb.var.yres = fb->panel->mode.yres;
fb->fb.var.xres_virtual = fb->panel->mode.xres;
fb->fb.var.yres_virtual = fb->panel->mode.yres;
fb->fb.var.bits_per_pixel = fb->panel->bpp;
fb->fb.var.grayscale = fb->panel->grayscale;
fb->fb.var.pixclock = fb->panel->mode.pixclock;
fb->fb.var.left_margin = fb->panel->mode.left_margin;
fb->fb.var.right_margin = fb->panel->mode.right_margin;
fb->fb.var.upper_margin = fb->panel->mode.upper_margin;
fb->fb.var.lower_margin = fb->panel->mode.lower_margin;
fb->fb.var.hsync_len = fb->panel->mode.hsync_len;
fb->fb.var.vsync_len = fb->panel->mode.vsync_len;
fb->fb.var.sync = fb->panel->mode.sync;
fb->fb.var.vmode = fb->panel->mode.vmode;
fb->fb.var.activate = FB_ACTIVATE_NOW;
fb->fb.var.nonstd = 0;
fb->fb.var.height = fb->panel->height;
fb->fb.var.width = fb->panel->width;
fb->fb.var.accel_flags = 0;
fb->fb.monspecs.hfmin = 0;
fb->fb.monspecs.hfmax = 100000;
fb->fb.monspecs.vfmin = 0;
fb->fb.monspecs.vfmax = 400;
fb->fb.monspecs.dclkmin = 1000000;
fb->fb.monspecs.dclkmax = 100000000;
/*
* Make sure that the bitfields are set appropriately.
*/
clcdfb_set_bitfields(fb, &fb->fb.var);
/*
* Allocate colourmap.
*/
ret = fb_alloc_cmap(&fb->fb.cmap, 256, 0);
if (ret)
goto unmap;
/*
* Ensure interrupts are disabled.
*/
writel(0, fb->regs + fb->off_ienb);
fb_set_var(&fb->fb, &fb->fb.var);
dev_info(&fb->dev->dev, "%s hardware, %s display\n",
fb->board->name, fb->panel->mode.name);
ret = register_framebuffer(&fb->fb);
if (ret == 0)
goto out;
printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret);
fb_dealloc_cmap(&fb->fb.cmap);
unmap:
iounmap(fb->regs);
clk_unprep:
clk_unprepare(fb->clk);
free_clk:
clk_put(fb->clk);
out:
return ret;
}
#ifdef CONFIG_OF
static int clcdfb_of_get_dpi_panel_mode(struct device_node *node,
struct fb_videomode *mode)
{
int err;
struct display_timing timing;
struct videomode video;
err = of_get_display_timing(node, "panel-timing", &timing);
if (err)
return err;
videomode_from_timing(&timing, &video);
err = fb_videomode_from_videomode(&video, mode);
if (err)
return err;
return 0;
}
static int clcdfb_snprintf_mode(char *buf, int size, struct fb_videomode *mode)
{
return snprintf(buf, size, "%ux%u@%u", mode->xres, mode->yres,
mode->refresh);
}
static int clcdfb_of_get_mode(struct device *dev, struct device_node *endpoint,
struct fb_videomode *mode)
{
int err;
struct device_node *panel;
char *name;
int len;
panel = of_graph_get_remote_port_parent(endpoint);
if (!panel)
return -ENODEV;
/* Only directly connected DPI panels supported for now */
if (of_device_is_compatible(panel, "panel-dpi"))
err = clcdfb_of_get_dpi_panel_mode(panel, mode);
else
err = -ENOENT;
if (err)
return err;
len = clcdfb_snprintf_mode(NULL, 0, mode);
name = devm_kzalloc(dev, len + 1, GFP_KERNEL);
if (!name)
return -ENOMEM;
clcdfb_snprintf_mode(name, len + 1, mode);
mode->name = name;
return 0;
}
static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0)
{
static struct {
unsigned int part;
u32 r0, g0, b0;
u32 caps;
} panels[] = {
{ 0x110, 1, 7, 13, CLCD_CAP_5551 },
{ 0x110, 0, 8, 16, CLCD_CAP_888 },
{ 0x111, 4, 14, 20, CLCD_CAP_444 },
{ 0x111, 3, 11, 19, CLCD_CAP_444 | CLCD_CAP_5551 },
{ 0x111, 3, 10, 19, CLCD_CAP_444 | CLCD_CAP_5551 |
CLCD_CAP_565 },
{ 0x111, 0, 8, 16, CLCD_CAP_444 | CLCD_CAP_5551 |
CLCD_CAP_565 | CLCD_CAP_888 },
};
int i;
/* Bypass pixel clock divider, data output on the falling edge */
fb->panel->tim2 = TIM2_BCD | TIM2_IPC;
/* TFT display, vert. comp. interrupt at the start of the back porch */
fb->panel->cntl |= CNTL_LCDTFT | CNTL_LCDVCOMP(1);
fb->panel->caps = 0;
/* Match the setup with known variants */
for (i = 0; i < ARRAY_SIZE(panels) && !fb->panel->caps; i++) {
if (amba_part(fb->dev) != panels[i].part)
continue;
if (g0 != panels[i].g0)
continue;
if (r0 == panels[i].r0 && b0 == panels[i].b0)
fb->panel->caps = panels[i].caps;
}
return fb->panel->caps ? 0 : -EINVAL;
}
static int clcdfb_of_init_display(struct clcd_fb *fb)
{
struct device_node *endpoint;
int err;
unsigned int bpp;
u32 max_bandwidth;
u32 tft_r0b0g0[3];
fb->panel = devm_kzalloc(&fb->dev->dev, sizeof(*fb->panel), GFP_KERNEL);
if (!fb->panel)
return -ENOMEM;
endpoint = of_graph_get_next_endpoint(fb->dev->dev.of_node, NULL);
if (!endpoint)
return -ENODEV;
err = clcdfb_of_get_mode(&fb->dev->dev, endpoint, &fb->panel->mode);
if (err)
return err;
err = of_property_read_u32(fb->dev->dev.of_node, "max-memory-bandwidth",
&max_bandwidth);
if (!err) {
/*
* max_bandwidth is in bytes per second and pixclock in
* pico-seconds, so the maximum allowed bits per pixel is
* 8 * max_bandwidth / (PICOS2KHZ(pixclock) * 1000)
* Rearrange this calculation to avoid overflow and then ensure
* result is a valid format.
*/
bpp = max_bandwidth / (1000 / 8)
/ PICOS2KHZ(fb->panel->mode.pixclock);
bpp = rounddown_pow_of_two(bpp);
if (bpp > 32)
bpp = 32;
} else
bpp = 32;
fb->panel->bpp = bpp;
#ifdef CONFIG_CPU_BIG_ENDIAN
fb->panel->cntl |= CNTL_BEBO;
#endif
fb->panel->width = -1;
fb->panel->height = -1;
if (of_property_read_u32_array(endpoint,
"arm,pl11x,tft-r0g0b0-pads",
tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) == 0)
return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0],
tft_r0b0g0[1], tft_r0b0g0[2]);
return -ENOENT;
}
static int clcdfb_of_vram_setup(struct clcd_fb *fb)
{
int err;
struct device_node *memory;
u64 size;
err = clcdfb_of_init_display(fb);
if (err)
return err;
memory = of_parse_phandle(fb->dev->dev.of_node, "memory-region", 0);
if (!memory)
return -ENODEV;
fb->fb.screen_base = of_iomap(memory, 0);
if (!fb->fb.screen_base)
return -ENOMEM;
fb->fb.fix.smem_start = of_translate_address(memory,
of_get_address(memory, 0, &size, NULL));
fb->fb.fix.smem_len = size;
return 0;
}
static int clcdfb_of_vram_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
unsigned long off, user_size, kernel_size;
off = vma->vm_pgoff << PAGE_SHIFT;
user_size = vma->vm_end - vma->vm_start;
kernel_size = fb->fb.fix.smem_len;
if (off >= kernel_size || user_size > (kernel_size - off))
return -ENXIO;
return remap_pfn_range(vma, vma->vm_start,
__phys_to_pfn(fb->fb.fix.smem_start) + vma->vm_pgoff,
user_size,
pgprot_writecombine(vma->vm_page_prot));
}
static void clcdfb_of_vram_remove(struct clcd_fb *fb)
{
iounmap(fb->fb.screen_base);
}
static int clcdfb_of_dma_setup(struct clcd_fb *fb)
{
unsigned long framesize;
dma_addr_t dma;
int err;
err = clcdfb_of_init_display(fb);
if (err)
return err;
framesize = fb->panel->mode.xres * fb->panel->mode.yres *
fb->panel->bpp / 8;
fb->fb.screen_base = dma_alloc_coherent(&fb->dev->dev, framesize,
&dma, GFP_KERNEL);
if (!fb->fb.screen_base)
return -ENOMEM;
fb->fb.fix.smem_start = dma;
fb->fb.fix.smem_len = framesize;
return 0;
}
static int clcdfb_of_dma_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base,
fb->fb.fix.smem_start, fb->fb.fix.smem_len);
}
static void clcdfb_of_dma_remove(struct clcd_fb *fb)
{
dma_free_coherent(&fb->dev->dev, fb->fb.fix.smem_len,
fb->fb.screen_base, fb->fb.fix.smem_start);
}
static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
{
struct clcd_board *board = devm_kzalloc(&dev->dev, sizeof(*board),
GFP_KERNEL);
struct device_node *node = dev->dev.of_node;
if (!board)
return NULL;
board->name = of_node_full_name(node);
board->caps = CLCD_CAP_ALL;
board->check = clcdfb_check;
board->decode = clcdfb_decode;
if (of_find_property(node, "memory-region", NULL)) {
board->setup = clcdfb_of_vram_setup;
board->mmap = clcdfb_of_vram_mmap;
board->remove = clcdfb_of_vram_remove;
} else {
board->setup = clcdfb_of_dma_setup;
board->mmap = clcdfb_of_dma_mmap;
board->remove = clcdfb_of_dma_remove;
}
return board;
}
#else
static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
{
return NULL;
}
#endif
static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
{
struct clcd_board *board = dev_get_platdata(&dev->dev);
struct clcd_fb *fb;
int ret;
if (!board)
board = clcdfb_of_get_board(dev);
if (!board)
return -EINVAL;
ret = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
if (ret)
goto out;
ret = amba_request_regions(dev, NULL);
if (ret) {
printk(KERN_ERR "CLCD: unable to reserve regs region\n");
goto out;
}
fb = kzalloc(sizeof(struct clcd_fb), GFP_KERNEL);
if (!fb) {
printk(KERN_INFO "CLCD: could not allocate new clcd_fb struct\n");
ret = -ENOMEM;
goto free_region;
}
fb->dev = dev;
fb->board = board;
dev_info(&fb->dev->dev, "PL%03x rev%u at 0x%08llx\n",
amba_part(dev), amba_rev(dev),
(unsigned long long)dev->res.start);
ret = fb->board->setup(fb);
if (ret)
goto free_fb;
ret = clcdfb_register(fb);
if (ret == 0) {
amba_set_drvdata(dev, fb);
goto out;
}
fb->board->remove(fb);
free_fb:
kfree(fb);
free_region:
amba_release_regions(dev);
out:
return ret;
}
static int clcdfb_remove(struct amba_device *dev)
{
struct clcd_fb *fb = amba_get_drvdata(dev);
clcdfb_disable(fb);
unregister_framebuffer(&fb->fb);
if (fb->fb.cmap.len)
fb_dealloc_cmap(&fb->fb.cmap);
iounmap(fb->regs);
clk_unprepare(fb->clk);
clk_put(fb->clk);
fb->board->remove(fb);
kfree(fb);
amba_release_regions(dev);
return 0;
}
static struct amba_id clcdfb_id_table[] = {
{
.id = 0x00041110,
.mask = 0x000ffffe,
},
{ 0, 0 },
};
MODULE_DEVICE_TABLE(amba, clcdfb_id_table);
static struct amba_driver clcd_driver = {
.drv = {
.name = "clcd-pl11x",
},
.probe = clcdfb_probe,
.remove = clcdfb_remove,
.id_table = clcdfb_id_table,
};
static int __init amba_clcdfb_init(void)
{
if (fb_get_options("ambafb", NULL))
return -ENODEV;
return amba_driver_register(&clcd_driver);
}
module_init(amba_clcdfb_init);
static void __exit amba_clcdfb_exit(void)
{
amba_driver_unregister(&clcd_driver);
}
module_exit(amba_clcdfb_exit);
MODULE_DESCRIPTION("ARM PrimeCell PL110 CLCD core driver");
MODULE_LICENSE("GPL");
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...