Revision 7f0801e566cc78315e5dc383bf3c3b5b5b436048 authored by Damien Lespiau on 05 February 2015, 19:35:13 UTC, committed by Jani Nikula on 18 March 2015, 08:09:05 UTC
We don't want to end up in a state where we track that the pipe has its primary plane enabled when primary plane registers are programmed with values that look possible but the plane actually disabled. Refuse to read out the fb state when the primary plane isn't enabled. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Reference: http://mid.gmane.org/20150203191507.GA2374@crion86 Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
1 parent 319c1d4
of_display_timing.c
/*
* OF helpers for parsing display timings
*
* Copyright (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
*
* based on of_videomode.c by Sascha Hauer <s.hauer@pengutronix.de>
*
* This file is released under the GPLv2
*/
#include <linux/export.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <video/display_timing.h>
#include <video/of_display_timing.h>
/**
* parse_timing_property - parse timing_entry from device_node
* @np: device_node with the property
* @name: name of the property
* @result: will be set to the return value
*
* DESCRIPTION:
* Every display_timing can be specified with either just the typical value or
* a range consisting of min/typ/max. This function helps handling this
**/
static int parse_timing_property(const struct device_node *np, const char *name,
struct timing_entry *result)
{
struct property *prop;
int length, cells, ret;
prop = of_find_property(np, name, &length);
if (!prop) {
pr_err("%s: could not find property %s\n",
of_node_full_name(np), name);
return -EINVAL;
}
cells = length / sizeof(u32);
if (cells == 1) {
ret = of_property_read_u32(np, name, &result->typ);
result->min = result->typ;
result->max = result->typ;
} else if (cells == 3) {
ret = of_property_read_u32_array(np, name, &result->min, cells);
} else {
pr_err("%s: illegal timing specification in %s\n",
of_node_full_name(np), name);
return -EINVAL;
}
return ret;
}
/**
* of_parse_display_timing - parse display_timing entry from device_node
* @np: device_node with the properties
**/
static int of_parse_display_timing(const struct device_node *np,
struct display_timing *dt)
{
u32 val = 0;
int ret = 0;
memset(dt, 0, sizeof(*dt));
ret |= parse_timing_property(np, "hback-porch", &dt->hback_porch);
ret |= parse_timing_property(np, "hfront-porch", &dt->hfront_porch);
ret |= parse_timing_property(np, "hactive", &dt->hactive);
ret |= parse_timing_property(np, "hsync-len", &dt->hsync_len);
ret |= parse_timing_property(np, "vback-porch", &dt->vback_porch);
ret |= parse_timing_property(np, "vfront-porch", &dt->vfront_porch);
ret |= parse_timing_property(np, "vactive", &dt->vactive);
ret |= parse_timing_property(np, "vsync-len", &dt->vsync_len);
ret |= parse_timing_property(np, "clock-frequency", &dt->pixelclock);
dt->flags = 0;
if (!of_property_read_u32(np, "vsync-active", &val))
dt->flags |= val ? DISPLAY_FLAGS_VSYNC_HIGH :
DISPLAY_FLAGS_VSYNC_LOW;
if (!of_property_read_u32(np, "hsync-active", &val))
dt->flags |= val ? DISPLAY_FLAGS_HSYNC_HIGH :
DISPLAY_FLAGS_HSYNC_LOW;
if (!of_property_read_u32(np, "de-active", &val))
dt->flags |= val ? DISPLAY_FLAGS_DE_HIGH :
DISPLAY_FLAGS_DE_LOW;
if (!of_property_read_u32(np, "pixelclk-active", &val))
dt->flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE :
DISPLAY_FLAGS_PIXDATA_NEGEDGE;
if (of_property_read_bool(np, "interlaced"))
dt->flags |= DISPLAY_FLAGS_INTERLACED;
if (of_property_read_bool(np, "doublescan"))
dt->flags |= DISPLAY_FLAGS_DOUBLESCAN;
if (of_property_read_bool(np, "doubleclk"))
dt->flags |= DISPLAY_FLAGS_DOUBLECLK;
if (ret) {
pr_err("%s: error reading timing properties\n",
of_node_full_name(np));
return -EINVAL;
}
return 0;
}
/**
* of_get_display_timing - parse a display_timing entry
* @np: device_node with the timing subnode
* @name: name of the timing node
* @dt: display_timing struct to fill
**/
int of_get_display_timing(struct device_node *np, const char *name,
struct display_timing *dt)
{
struct device_node *timing_np;
if (!np)
return -EINVAL;
timing_np = of_get_child_by_name(np, name);
if (!timing_np) {
pr_err("%s: could not find node '%s'\n",
of_node_full_name(np), name);
return -ENOENT;
}
return of_parse_display_timing(timing_np, dt);
}
EXPORT_SYMBOL_GPL(of_get_display_timing);
/**
* of_get_display_timings - parse all display_timing entries from a device_node
* @np: device_node with the subnodes
**/
struct display_timings *of_get_display_timings(struct device_node *np)
{
struct device_node *timings_np;
struct device_node *entry;
struct device_node *native_mode;
struct display_timings *disp;
if (!np)
return NULL;
timings_np = of_get_child_by_name(np, "display-timings");
if (!timings_np) {
pr_err("%s: could not find display-timings node\n",
of_node_full_name(np));
return NULL;
}
disp = kzalloc(sizeof(*disp), GFP_KERNEL);
if (!disp) {
pr_err("%s: could not allocate struct disp'\n",
of_node_full_name(np));
goto dispfail;
}
entry = of_parse_phandle(timings_np, "native-mode", 0);
/* assume first child as native mode if none provided */
if (!entry)
entry = of_get_next_child(timings_np, NULL);
/* if there is no child, it is useless to go on */
if (!entry) {
pr_err("%s: no timing specifications given\n",
of_node_full_name(np));
goto entryfail;
}
pr_debug("%s: using %s as default timing\n",
of_node_full_name(np), entry->name);
native_mode = entry;
disp->num_timings = of_get_child_count(timings_np);
if (disp->num_timings == 0) {
/* should never happen, as entry was already found above */
pr_err("%s: no timings specified\n", of_node_full_name(np));
goto entryfail;
}
disp->timings = kzalloc(sizeof(struct display_timing *) *
disp->num_timings, GFP_KERNEL);
if (!disp->timings) {
pr_err("%s: could not allocate timings array\n",
of_node_full_name(np));
goto entryfail;
}
disp->num_timings = 0;
disp->native_mode = 0;
for_each_child_of_node(timings_np, entry) {
struct display_timing *dt;
int r;
dt = kzalloc(sizeof(*dt), GFP_KERNEL);
if (!dt) {
pr_err("%s: could not allocate display_timing struct\n",
of_node_full_name(np));
goto timingfail;
}
r = of_parse_display_timing(entry, dt);
if (r) {
/*
* to not encourage wrong devicetrees, fail in case of
* an error
*/
pr_err("%s: error in timing %d\n",
of_node_full_name(np), disp->num_timings + 1);
goto timingfail;
}
if (native_mode == entry)
disp->native_mode = disp->num_timings;
disp->timings[disp->num_timings] = dt;
disp->num_timings++;
}
of_node_put(timings_np);
/*
* native_mode points to the device_node returned by of_parse_phandle
* therefore call of_node_put on it
*/
of_node_put(native_mode);
pr_debug("%s: got %d timings. Using timing #%d as default\n",
of_node_full_name(np), disp->num_timings,
disp->native_mode + 1);
return disp;
timingfail:
of_node_put(native_mode);
display_timings_release(disp);
disp = NULL;
entryfail:
kfree(disp);
dispfail:
of_node_put(timings_np);
return NULL;
}
EXPORT_SYMBOL_GPL(of_get_display_timings);
/**
* of_display_timings_exist - check if a display-timings node is provided
* @np: device_node with the timing
**/
int of_display_timings_exist(struct device_node *np)
{
struct device_node *timings_np;
if (!np)
return -EINVAL;
timings_np = of_parse_phandle(np, "display-timings", 0);
if (!timings_np)
return -EINVAL;
of_node_put(timings_np);
return 1;
}
EXPORT_SYMBOL_GPL(of_display_timings_exist);
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...