Revision 7f35144cea219104fe42e7c6cd0ee5103016da2e authored by Vlad Zakharov on 03 March 2017, 11:30:02 UTC, committed by Vineet Gupta on 06 March 2017, 04:04:59 UTC
We were reading clock rate directly from device tree "clock-frequency" property of corresponding clock node in show_cpuinfo function. Such approach is correct only in case cpu is always clocked by "fixed-clock". If we use clock driver that allows rate to be changed this won't work as rate may change during the time or even "clock-frequency" property may not be presented at all. So this commit replaces reading device tree with getting rate from clock driver. This approach is much more flexible and will work for both fixed and mutable clocks. Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
1 parent 4ed1095
Makefile
#
# Makefile for the Linux filesystems.
#
# 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
# Rewritten to use lists instead of if-statements.
#
obj-y := open.o read_write.o file_table.o super.o \
char_dev.o stat.o exec.o pipe.o namei.o fcntl.o \
ioctl.o readdir.o select.o dcache.o inode.o \
attr.o bad_inode.o file.o filesystems.o namespace.o \
seq_file.o xattr.o libfs.o fs-writeback.o \
pnode.o splice.o sync.o utimes.o \
stack.o fs_struct.o statfs.o fs_pin.o nsfs.o
ifeq ($(CONFIG_BLOCK),y)
obj-y += buffer.o block_dev.o direct-io.o mpage.o
else
obj-y += no-block.o
endif
obj-$(CONFIG_PROC_FS) += proc_namespace.o
obj-y += notify/
obj-$(CONFIG_EPOLL) += eventpoll.o
obj-$(CONFIG_ANON_INODES) += anon_inodes.o
obj-$(CONFIG_SIGNALFD) += signalfd.o
obj-$(CONFIG_TIMERFD) += timerfd.o
obj-$(CONFIG_EVENTFD) += eventfd.o
obj-$(CONFIG_USERFAULTFD) += userfaultfd.o
obj-$(CONFIG_AIO) += aio.o
obj-$(CONFIG_FS_DAX) += dax.o
obj-$(CONFIG_FS_ENCRYPTION) += crypto/
obj-$(CONFIG_FILE_LOCKING) += locks.o
obj-$(CONFIG_COMPAT) += compat.o compat_ioctl.o
obj-$(CONFIG_BINFMT_AOUT) += binfmt_aout.o
obj-$(CONFIG_BINFMT_EM86) += binfmt_em86.o
obj-$(CONFIG_BINFMT_MISC) += binfmt_misc.o
obj-$(CONFIG_BINFMT_SCRIPT) += binfmt_script.o
obj-$(CONFIG_BINFMT_ELF) += binfmt_elf.o
obj-$(CONFIG_COMPAT_BINFMT_ELF) += compat_binfmt_elf.o
obj-$(CONFIG_BINFMT_ELF_FDPIC) += binfmt_elf_fdpic.o
obj-$(CONFIG_BINFMT_FLAT) += binfmt_flat.o
obj-$(CONFIG_FS_MBCACHE) += mbcache.o
obj-$(CONFIG_FS_POSIX_ACL) += posix_acl.o
obj-$(CONFIG_NFS_COMMON) += nfs_common/
obj-$(CONFIG_COREDUMP) += coredump.o
obj-$(CONFIG_SYSCTL) += drop_caches.o
obj-$(CONFIG_FHANDLE) += fhandle.o
obj-$(CONFIG_FS_IOMAP) += iomap.o
obj-y += quota/
obj-$(CONFIG_PROC_FS) += proc/
obj-$(CONFIG_KERNFS) += kernfs/
obj-$(CONFIG_SYSFS) += sysfs/
obj-$(CONFIG_CONFIGFS_FS) += configfs/
obj-y += devpts/
obj-$(CONFIG_PROFILING) += dcookies.o
obj-$(CONFIG_DLM) += dlm/
# Do not add any filesystems before this line
obj-$(CONFIG_FSCACHE) += fscache/
obj-$(CONFIG_REISERFS_FS) += reiserfs/
obj-$(CONFIG_EXT4_FS) += ext4/
# We place ext4 before ext2 so that clean ext3 root fs's do NOT mount using the
# ext2 driver, which doesn't know about journalling! Explicitly request ext2
# by giving the rootfstype= parameter.
obj-$(CONFIG_EXT2_FS) += ext2/
obj-$(CONFIG_JBD2) += jbd2/
obj-$(CONFIG_CRAMFS) += cramfs/
obj-$(CONFIG_SQUASHFS) += squashfs/
obj-y += ramfs/
obj-$(CONFIG_HUGETLBFS) += hugetlbfs/
obj-$(CONFIG_CODA_FS) += coda/
obj-$(CONFIG_MINIX_FS) += minix/
obj-$(CONFIG_FAT_FS) += fat/
obj-$(CONFIG_BFS_FS) += bfs/
obj-$(CONFIG_ISO9660_FS) += isofs/
obj-$(CONFIG_HFSPLUS_FS) += hfsplus/ # Before hfs to find wrapped HFS+
obj-$(CONFIG_HFS_FS) += hfs/
obj-$(CONFIG_ECRYPT_FS) += ecryptfs/
obj-$(CONFIG_VXFS_FS) += freevxfs/
obj-$(CONFIG_NFS_FS) += nfs/
obj-$(CONFIG_EXPORTFS) += exportfs/
obj-$(CONFIG_NFSD) += nfsd/
obj-$(CONFIG_LOCKD) += lockd/
obj-$(CONFIG_NLS) += nls/
obj-$(CONFIG_SYSV_FS) += sysv/
obj-$(CONFIG_CIFS) += cifs/
obj-$(CONFIG_NCP_FS) += ncpfs/
obj-$(CONFIG_HPFS_FS) += hpfs/
obj-$(CONFIG_NTFS_FS) += ntfs/
obj-$(CONFIG_UFS_FS) += ufs/
obj-$(CONFIG_EFS_FS) += efs/
obj-$(CONFIG_JFFS2_FS) += jffs2/
obj-$(CONFIG_UBIFS_FS) += ubifs/
obj-$(CONFIG_AFFS_FS) += affs/
obj-$(CONFIG_ROMFS_FS) += romfs/
obj-$(CONFIG_QNX4FS_FS) += qnx4/
obj-$(CONFIG_QNX6FS_FS) += qnx6/
obj-$(CONFIG_AUTOFS4_FS) += autofs4/
obj-$(CONFIG_ADFS_FS) += adfs/
obj-$(CONFIG_FUSE_FS) += fuse/
obj-$(CONFIG_OVERLAY_FS) += overlayfs/
obj-$(CONFIG_ORANGEFS_FS) += orangefs/
obj-$(CONFIG_UDF_FS) += udf/
obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/
obj-$(CONFIG_OMFS_FS) += omfs/
obj-$(CONFIG_JFS_FS) += jfs/
obj-$(CONFIG_XFS_FS) += xfs/
obj-$(CONFIG_9P_FS) += 9p/
obj-$(CONFIG_AFS_FS) += afs/
obj-$(CONFIG_NILFS2_FS) += nilfs2/
obj-$(CONFIG_BEFS_FS) += befs/
obj-$(CONFIG_HOSTFS) += hostfs/
obj-$(CONFIG_CACHEFILES) += cachefiles/
obj-$(CONFIG_DEBUG_FS) += debugfs/
obj-$(CONFIG_TRACING) += tracefs/
obj-$(CONFIG_OCFS2_FS) += ocfs2/
obj-$(CONFIG_BTRFS_FS) += btrfs/
obj-$(CONFIG_GFS2_FS) += gfs2/
obj-$(CONFIG_F2FS_FS) += f2fs/
obj-y += exofs/ # Multiple modules
obj-$(CONFIG_CEPH_FS) += ceph/
obj-$(CONFIG_PSTORE) += pstore/
obj-$(CONFIG_EFIVAR_FS) += efivarfs/
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...