Revision 7f453c24b95a085fc7bd35d53b33abc4dc5a048b authored by Peter Zijlstra on 21 July 2009, 11:19:40 UTC, committed by Peter Zijlstra on 22 July 2009, 16:05:56 UTC
Anton noted that for inherited counters the counter-id as provided by PERF_SAMPLE_ID isn't mappable to the id found through PERF_RECORD_ID because each inherited counter gets its own id. His suggestion was to always return the parent counter id, since that is the primary counter id as exposed. However, these inherited counters have a unique identifier so that events like PERF_EVENT_PERIOD and PERF_EVENT_THROTTLE can be specific about which counter gets modified, which is important when trying to normalize the sample streams. This patch removes PERF_EVENT_PERIOD in favour of PERF_SAMPLE_PERIOD, which is more useful anyway, since changing periods became a lot more common than initially thought -- rendering PERF_EVENT_PERIOD the less useful solution (also, PERF_SAMPLE_PERIOD reports the more accurate value, since it reports the value used to trigger the overflow, whereas PERF_EVENT_PERIOD simply reports the requested period changed, which might only take effect on the next cycle). This still leaves us PERF_EVENT_THROTTLE to consider, but since that _should_ be a rare occurrence, and linking it to a primary id is the most useful bit to diagnose the problem, we introduce a PERF_SAMPLE_STREAM_ID, for those few cases where the full reconstruction is important. [Does change the ABI a little, but I see no other way out] Suggested-by: Anton Blanchard <anton@samba.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1248095846.15751.8781.camel@twins>
1 parent 573402d
lapb_in.c
/*
* LAPB release 002
*
* This code REQUIRES 2.1.15 or higher/ NET3.038
*
* This module:
* This module is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* History
* LAPB 001 Jonathan Naulor Started Coding
* LAPB 002 Jonathan Naylor New timer architecture.
* 2000-10-29 Henner Eisen lapb_data_indication() return status.
*/
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/in.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/fcntl.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <net/lapb.h>
/*
* State machine for state 0, Disconnected State.
* The handling of the timer(s) is in file lapb_timer.c.
*/
static void lapb_state0_machine(struct lapb_cb *lapb, struct sk_buff *skb,
struct lapb_frame *frame)
{
switch (frame->type) {
case LAPB_SABM:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S0 RX SABM(%d)\n",
lapb->dev, frame->pf);
#endif
if (lapb->mode & LAPB_EXTENDED) {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S0 TX DM(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_DM, frame->pf,
LAPB_RESPONSE);
} else {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S0 TX UA(%d)\n",
lapb->dev, frame->pf);
#endif
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S0 -> S3\n",
lapb->dev);
#endif
lapb_send_control(lapb, LAPB_UA, frame->pf,
LAPB_RESPONSE);
lapb_stop_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb->state = LAPB_STATE_3;
lapb->condition = 0x00;
lapb->n2count = 0;
lapb->vs = 0;
lapb->vr = 0;
lapb->va = 0;
lapb_connect_indication(lapb, LAPB_OK);
}
break;
case LAPB_SABME:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S0 RX SABME(%d)\n",
lapb->dev, frame->pf);
#endif
if (lapb->mode & LAPB_EXTENDED) {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S0 TX UA(%d)\n",
lapb->dev, frame->pf);
#endif
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S0 -> S3\n",
lapb->dev);
#endif
lapb_send_control(lapb, LAPB_UA, frame->pf,
LAPB_RESPONSE);
lapb_stop_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb->state = LAPB_STATE_3;
lapb->condition = 0x00;
lapb->n2count = 0;
lapb->vs = 0;
lapb->vr = 0;
lapb->va = 0;
lapb_connect_indication(lapb, LAPB_OK);
} else {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S0 TX DM(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_DM, frame->pf,
LAPB_RESPONSE);
}
break;
case LAPB_DISC:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S0 RX DISC(%d)\n",
lapb->dev, frame->pf);
printk(KERN_DEBUG "lapb: (%p) S0 TX UA(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_UA, frame->pf,
LAPB_RESPONSE);
break;
default:
break;
}
kfree_skb(skb);
}
/*
* State machine for state 1, Awaiting Connection State.
* The handling of the timer(s) is in file lapb_timer.c.
*/
static void lapb_state1_machine(struct lapb_cb *lapb, struct sk_buff *skb,
struct lapb_frame *frame)
{
switch (frame->type) {
case LAPB_SABM:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S1 RX SABM(%d)\n",
lapb->dev, frame->pf);
#endif
if (lapb->mode & LAPB_EXTENDED) {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S1 TX DM(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_DM, frame->pf,
LAPB_RESPONSE);
} else {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S1 TX UA(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_UA, frame->pf,
LAPB_RESPONSE);
}
break;
case LAPB_SABME:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S1 RX SABME(%d)\n",
lapb->dev, frame->pf);
#endif
if (lapb->mode & LAPB_EXTENDED) {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S1 TX UA(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_UA, frame->pf,
LAPB_RESPONSE);
} else {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S1 TX DM(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_DM, frame->pf,
LAPB_RESPONSE);
}
break;
case LAPB_DISC:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S1 RX DISC(%d)\n",
lapb->dev, frame->pf);
printk(KERN_DEBUG "lapb: (%p) S1 TX DM(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_DM, frame->pf,
LAPB_RESPONSE);
break;
case LAPB_UA:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S1 RX UA(%d)\n",
lapb->dev, frame->pf);
#endif
if (frame->pf) {
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S1 -> S3\n",
lapb->dev);
#endif
lapb_stop_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb->state = LAPB_STATE_3;
lapb->condition = 0x00;
lapb->n2count = 0;
lapb->vs = 0;
lapb->vr = 0;
lapb->va = 0;
lapb_connect_confirmation(lapb, LAPB_OK);
}
break;
case LAPB_DM:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S1 RX DM(%d)\n",
lapb->dev, frame->pf);
#endif
if (frame->pf) {
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S1 -> S0\n",
lapb->dev);
#endif
lapb_clear_queues(lapb);
lapb->state = LAPB_STATE_0;
lapb_start_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb_disconnect_indication(lapb, LAPB_REFUSED);
}
break;
}
kfree_skb(skb);
}
/*
* State machine for state 2, Awaiting Release State.
* The handling of the timer(s) is in file lapb_timer.c
*/
static void lapb_state2_machine(struct lapb_cb *lapb, struct sk_buff *skb,
struct lapb_frame *frame)
{
switch (frame->type) {
case LAPB_SABM:
case LAPB_SABME:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S2 RX {SABM,SABME}(%d)\n",
lapb->dev, frame->pf);
printk(KERN_DEBUG "lapb: (%p) S2 TX DM(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_DM, frame->pf,
LAPB_RESPONSE);
break;
case LAPB_DISC:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S2 RX DISC(%d)\n",
lapb->dev, frame->pf);
printk(KERN_DEBUG "lapb: (%p) S2 TX UA(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_UA, frame->pf,
LAPB_RESPONSE);
break;
case LAPB_UA:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S2 RX UA(%d)\n",
lapb->dev, frame->pf);
#endif
if (frame->pf) {
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S2 -> S0\n",
lapb->dev);
#endif
lapb->state = LAPB_STATE_0;
lapb_start_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb_disconnect_confirmation(lapb, LAPB_OK);
}
break;
case LAPB_DM:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S2 RX DM(%d)\n",
lapb->dev, frame->pf);
#endif
if (frame->pf) {
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S2 -> S0\n",
lapb->dev);
#endif
lapb->state = LAPB_STATE_0;
lapb_start_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb_disconnect_confirmation(lapb,
LAPB_NOTCONNECTED);
}
break;
case LAPB_I:
case LAPB_REJ:
case LAPB_RNR:
case LAPB_RR:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S2 RX {I,REJ,RNR,RR}"
"(%d)\n", lapb->dev, frame->pf);
printk(KERN_DEBUG "lapb: (%p) S2 RX DM(%d)\n",
lapb->dev, frame->pf);
#endif
if (frame->pf)
lapb_send_control(lapb, LAPB_DM, frame->pf,
LAPB_RESPONSE);
break;
}
kfree_skb(skb);
}
/*
* State machine for state 3, Connected State.
* The handling of the timer(s) is in file lapb_timer.c
*/
static void lapb_state3_machine(struct lapb_cb *lapb, struct sk_buff *skb,
struct lapb_frame *frame)
{
int queued = 0;
int modulus = (lapb->mode & LAPB_EXTENDED) ? LAPB_EMODULUS :
LAPB_SMODULUS;
switch (frame->type) {
case LAPB_SABM:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 RX SABM(%d)\n",
lapb->dev, frame->pf);
#endif
if (lapb->mode & LAPB_EXTENDED) {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 TX DM(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_DM, frame->pf,
LAPB_RESPONSE);
} else {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 TX UA(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_UA, frame->pf,
LAPB_RESPONSE);
lapb_stop_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb->condition = 0x00;
lapb->n2count = 0;
lapb->vs = 0;
lapb->vr = 0;
lapb->va = 0;
lapb_requeue_frames(lapb);
}
break;
case LAPB_SABME:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 RX SABME(%d)\n",
lapb->dev, frame->pf);
#endif
if (lapb->mode & LAPB_EXTENDED) {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 TX UA(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_UA, frame->pf,
LAPB_RESPONSE);
lapb_stop_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb->condition = 0x00;
lapb->n2count = 0;
lapb->vs = 0;
lapb->vr = 0;
lapb->va = 0;
lapb_requeue_frames(lapb);
} else {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 TX DM(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_DM, frame->pf,
LAPB_RESPONSE);
}
break;
case LAPB_DISC:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 RX DISC(%d)\n",
lapb->dev, frame->pf);
#endif
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S3 -> S0\n",
lapb->dev);
#endif
lapb_clear_queues(lapb);
lapb_send_control(lapb, LAPB_UA, frame->pf,
LAPB_RESPONSE);
lapb_start_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb->state = LAPB_STATE_0;
lapb_disconnect_indication(lapb, LAPB_OK);
break;
case LAPB_DM:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 RX DM(%d)\n",
lapb->dev, frame->pf);
#endif
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S3 -> S0\n",
lapb->dev);
#endif
lapb_clear_queues(lapb);
lapb->state = LAPB_STATE_0;
lapb_start_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb_disconnect_indication(lapb, LAPB_NOTCONNECTED);
break;
case LAPB_RNR:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 RX RNR(%d) R%d\n",
lapb->dev, frame->pf, frame->nr);
#endif
lapb->condition |= LAPB_PEER_RX_BUSY_CONDITION;
lapb_check_need_response(lapb, frame->cr, frame->pf);
if (lapb_validate_nr(lapb, frame->nr)) {
lapb_check_iframes_acked(lapb, frame->nr);
} else {
lapb->frmr_data = *frame;
lapb->frmr_type = LAPB_FRMR_Z;
lapb_transmit_frmr(lapb);
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S3 -> S4\n",
lapb->dev);
#endif
lapb_start_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb->state = LAPB_STATE_4;
lapb->n2count = 0;
}
break;
case LAPB_RR:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 RX RR(%d) R%d\n",
lapb->dev, frame->pf, frame->nr);
#endif
lapb->condition &= ~LAPB_PEER_RX_BUSY_CONDITION;
lapb_check_need_response(lapb, frame->cr, frame->pf);
if (lapb_validate_nr(lapb, frame->nr)) {
lapb_check_iframes_acked(lapb, frame->nr);
} else {
lapb->frmr_data = *frame;
lapb->frmr_type = LAPB_FRMR_Z;
lapb_transmit_frmr(lapb);
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S3 -> S4\n",
lapb->dev);
#endif
lapb_start_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb->state = LAPB_STATE_4;
lapb->n2count = 0;
}
break;
case LAPB_REJ:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 RX REJ(%d) R%d\n",
lapb->dev, frame->pf, frame->nr);
#endif
lapb->condition &= ~LAPB_PEER_RX_BUSY_CONDITION;
lapb_check_need_response(lapb, frame->cr, frame->pf);
if (lapb_validate_nr(lapb, frame->nr)) {
lapb_frames_acked(lapb, frame->nr);
lapb_stop_t1timer(lapb);
lapb->n2count = 0;
lapb_requeue_frames(lapb);
} else {
lapb->frmr_data = *frame;
lapb->frmr_type = LAPB_FRMR_Z;
lapb_transmit_frmr(lapb);
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S3 -> S4\n",
lapb->dev);
#endif
lapb_start_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb->state = LAPB_STATE_4;
lapb->n2count = 0;
}
break;
case LAPB_I:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 RX I(%d) S%d R%d\n",
lapb->dev, frame->pf, frame->ns, frame->nr);
#endif
if (!lapb_validate_nr(lapb, frame->nr)) {
lapb->frmr_data = *frame;
lapb->frmr_type = LAPB_FRMR_Z;
lapb_transmit_frmr(lapb);
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S3 -> S4\n",
lapb->dev);
#endif
lapb_start_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb->state = LAPB_STATE_4;
lapb->n2count = 0;
break;
}
if (lapb->condition & LAPB_PEER_RX_BUSY_CONDITION)
lapb_frames_acked(lapb, frame->nr);
else
lapb_check_iframes_acked(lapb, frame->nr);
if (frame->ns == lapb->vr) {
int cn;
cn = lapb_data_indication(lapb, skb);
queued = 1;
/*
* If upper layer has dropped the frame, we
* basically ignore any further protocol
* processing. This will cause the peer
* to re-transmit the frame later like
* a frame lost on the wire.
*/
if (cn == NET_RX_DROP) {
printk(KERN_DEBUG
"LAPB: rx congestion\n");
break;
}
lapb->vr = (lapb->vr + 1) % modulus;
lapb->condition &= ~LAPB_REJECT_CONDITION;
if (frame->pf)
lapb_enquiry_response(lapb);
else {
if (!(lapb->condition &
LAPB_ACK_PENDING_CONDITION)) {
lapb->condition |= LAPB_ACK_PENDING_CONDITION;
lapb_start_t2timer(lapb);
}
}
} else {
if (lapb->condition & LAPB_REJECT_CONDITION) {
if (frame->pf)
lapb_enquiry_response(lapb);
} else {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG
"lapb: (%p) S3 TX REJ(%d) R%d\n",
lapb->dev, frame->pf, lapb->vr);
#endif
lapb->condition |= LAPB_REJECT_CONDITION;
lapb_send_control(lapb, LAPB_REJ,
frame->pf,
LAPB_RESPONSE);
lapb->condition &= ~LAPB_ACK_PENDING_CONDITION;
}
}
break;
case LAPB_FRMR:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 RX FRMR(%d) %02X "
"%02X %02X %02X %02X\n", lapb->dev, frame->pf,
skb->data[0], skb->data[1], skb->data[2],
skb->data[3], skb->data[4]);
#endif
lapb_establish_data_link(lapb);
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S3 -> S1\n",
lapb->dev);
#endif
lapb_requeue_frames(lapb);
lapb->state = LAPB_STATE_1;
break;
case LAPB_ILLEGAL:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S3 RX ILLEGAL(%d)\n",
lapb->dev, frame->pf);
#endif
lapb->frmr_data = *frame;
lapb->frmr_type = LAPB_FRMR_W;
lapb_transmit_frmr(lapb);
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S3 -> S4\n", lapb->dev);
#endif
lapb_start_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb->state = LAPB_STATE_4;
lapb->n2count = 0;
break;
}
if (!queued)
kfree_skb(skb);
}
/*
* State machine for state 4, Frame Reject State.
* The handling of the timer(s) is in file lapb_timer.c.
*/
static void lapb_state4_machine(struct lapb_cb *lapb, struct sk_buff *skb,
struct lapb_frame *frame)
{
switch (frame->type) {
case LAPB_SABM:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S4 RX SABM(%d)\n",
lapb->dev, frame->pf);
#endif
if (lapb->mode & LAPB_EXTENDED) {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S4 TX DM(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_DM, frame->pf,
LAPB_RESPONSE);
} else {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S4 TX UA(%d)\n",
lapb->dev, frame->pf);
#endif
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S4 -> S3\n",
lapb->dev);
#endif
lapb_send_control(lapb, LAPB_UA, frame->pf,
LAPB_RESPONSE);
lapb_stop_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb->state = LAPB_STATE_3;
lapb->condition = 0x00;
lapb->n2count = 0;
lapb->vs = 0;
lapb->vr = 0;
lapb->va = 0;
lapb_connect_indication(lapb, LAPB_OK);
}
break;
case LAPB_SABME:
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S4 RX SABME(%d)\n",
lapb->dev, frame->pf);
#endif
if (lapb->mode & LAPB_EXTENDED) {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S4 TX UA(%d)\n",
lapb->dev, frame->pf);
#endif
#if LAPB_DEBUG > 0
printk(KERN_DEBUG "lapb: (%p) S4 -> S3\n",
lapb->dev);
#endif
lapb_send_control(lapb, LAPB_UA, frame->pf,
LAPB_RESPONSE);
lapb_stop_t1timer(lapb);
lapb_stop_t2timer(lapb);
lapb->state = LAPB_STATE_3;
lapb->condition = 0x00;
lapb->n2count = 0;
lapb->vs = 0;
lapb->vr = 0;
lapb->va = 0;
lapb_connect_indication(lapb, LAPB_OK);
} else {
#if LAPB_DEBUG > 1
printk(KERN_DEBUG "lapb: (%p) S4 TX DM(%d)\n",
lapb->dev, frame->pf);
#endif
lapb_send_control(lapb, LAPB_DM, frame->pf,
LAPB_RESPONSE);
}
break;
}
kfree_skb(skb);
}
/*
* Process an incoming LAPB frame
*/
void lapb_data_input(struct lapb_cb *lapb, struct sk_buff *skb)
{
struct lapb_frame frame;
if (lapb_decode(lapb, skb, &frame) < 0) {
kfree_skb(skb);
return;
}
switch (lapb->state) {
case LAPB_STATE_0:
lapb_state0_machine(lapb, skb, &frame); break;
case LAPB_STATE_1:
lapb_state1_machine(lapb, skb, &frame); break;
case LAPB_STATE_2:
lapb_state2_machine(lapb, skb, &frame); break;
case LAPB_STATE_3:
lapb_state3_machine(lapb, skb, &frame); break;
case LAPB_STATE_4:
lapb_state4_machine(lapb, skb, &frame); break;
}
lapb_kick(lapb);
}
Computing file changes ...