Revision 80ef4464d5e27408685e609d389663aad46644b9 authored by Robert Richter on 20 March 2019, 18:57:23 UTC, committed by Joerg Roedel on 22 March 2019, 11:01:58 UTC
If a 32 bit allocation request is too big to possibly succeed, it early exits with a failure and then should never update max32_alloc_ size. This patch fixes current code, now the size is only updated if the slow path failed while walking the tree. Without the fix the allocation may enter the slow path again even if there was a failure before of a request with the same or a smaller size. Cc: <stable@vger.kernel.org> # 4.20+ Fixes: bee60e94a1e2 ("iommu/iova: Optimise attempts to allocate iova from 32bit address range") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
1 parent 4e50ce0
aspeed-lpc-ctrl.c
/*
* Copyright 2017 IBM Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/clk.h>
#include <linux/mfd/syscon.h>
#include <linux/miscdevice.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/poll.h>
#include <linux/regmap.h>
#include <linux/aspeed-lpc-ctrl.h>
#define DEVICE_NAME "aspeed-lpc-ctrl"
#define HICR5 0x0
#define HICR5_ENL2H BIT(8)
#define HICR5_ENFWH BIT(10)
#define HICR7 0x8
#define HICR8 0xc
struct aspeed_lpc_ctrl {
struct miscdevice miscdev;
struct regmap *regmap;
struct clk *clk;
phys_addr_t mem_base;
resource_size_t mem_size;
u32 pnor_size;
u32 pnor_base;
};
static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file)
{
return container_of(file->private_data, struct aspeed_lpc_ctrl,
miscdev);
}
static int aspeed_lpc_ctrl_mmap(struct file *file, struct vm_area_struct *vma)
{
struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
unsigned long vsize = vma->vm_end - vma->vm_start;
pgprot_t prot = vma->vm_page_prot;
if (vma->vm_pgoff + vsize > lpc_ctrl->mem_base + lpc_ctrl->mem_size)
return -EINVAL;
/* ast2400/2500 AHB accesses are not cache coherent */
prot = pgprot_noncached(prot);
if (remap_pfn_range(vma, vma->vm_start,
(lpc_ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff,
vsize, prot))
return -EAGAIN;
return 0;
}
static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd,
unsigned long param)
{
struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
void __user *p = (void __user *)param;
struct aspeed_lpc_ctrl_mapping map;
u32 addr;
u32 size;
long rc;
if (copy_from_user(&map, p, sizeof(map)))
return -EFAULT;
if (map.flags != 0)
return -EINVAL;
switch (cmd) {
case ASPEED_LPC_CTRL_IOCTL_GET_SIZE:
/* The flash windows don't report their size */
if (map.window_type != ASPEED_LPC_CTRL_WINDOW_MEMORY)
return -EINVAL;
/* Support more than one window id in the future */
if (map.window_id != 0)
return -EINVAL;
map.size = lpc_ctrl->mem_size;
return copy_to_user(p, &map, sizeof(map)) ? -EFAULT : 0;
case ASPEED_LPC_CTRL_IOCTL_MAP:
/*
* The top half of HICR7 is the MSB of the BMC address of the
* mapping.
* The bottom half of HICR7 is the MSB of the HOST LPC
* firmware space address of the mapping.
*
* The 1 bits in the top of half of HICR8 represent the bits
* (in the requested address) that should be ignored and
* replaced with those from the top half of HICR7.
* The 1 bits in the bottom half of HICR8 represent the bits
* (in the requested address) that should be kept and pass
* into the BMC address space.
*/
/*
* It doesn't make sense to talk about a size or offset with
* low 16 bits set. Both HICR7 and HICR8 talk about the top 16
* bits of addresses and sizes.
*/
if ((map.size & 0x0000ffff) || (map.offset & 0x0000ffff))
return -EINVAL;
/*
* Because of the way the masks work in HICR8 offset has to
* be a multiple of size.
*/
if (map.offset & (map.size - 1))
return -EINVAL;
if (map.window_type == ASPEED_LPC_CTRL_WINDOW_FLASH) {
addr = lpc_ctrl->pnor_base;
size = lpc_ctrl->pnor_size;
} else if (map.window_type == ASPEED_LPC_CTRL_WINDOW_MEMORY) {
addr = lpc_ctrl->mem_base;
size = lpc_ctrl->mem_size;
} else {
return -EINVAL;
}
/* Check overflow first! */
if (map.offset + map.size < map.offset ||
map.offset + map.size > size)
return -EINVAL;
if (map.size == 0 || map.size > size)
return -EINVAL;
addr += map.offset;
/*
* addr (host lpc address) is safe regardless of values. This
* simply changes the address the host has to request on its
* side of the LPC bus. This cannot impact the hosts own
* memory space by surprise as LPC specific accessors are
* required. The only strange thing that could be done is
* setting the lower 16 bits but the shift takes care of that.
*/
rc = regmap_write(lpc_ctrl->regmap, HICR7,
(addr | (map.addr >> 16)));
if (rc)
return rc;
rc = regmap_write(lpc_ctrl->regmap, HICR8,
(~(map.size - 1)) | ((map.size >> 16) - 1));
if (rc)
return rc;
/*
* Enable LPC FHW cycles. This is required for the host to
* access the regions specified.
*/
return regmap_update_bits(lpc_ctrl->regmap, HICR5,
HICR5_ENFWH | HICR5_ENL2H,
HICR5_ENFWH | HICR5_ENL2H);
}
return -EINVAL;
}
static const struct file_operations aspeed_lpc_ctrl_fops = {
.owner = THIS_MODULE,
.mmap = aspeed_lpc_ctrl_mmap,
.unlocked_ioctl = aspeed_lpc_ctrl_ioctl,
};
static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
{
struct aspeed_lpc_ctrl *lpc_ctrl;
struct device_node *node;
struct resource resm;
struct device *dev;
int rc;
dev = &pdev->dev;
lpc_ctrl = devm_kzalloc(dev, sizeof(*lpc_ctrl), GFP_KERNEL);
if (!lpc_ctrl)
return -ENOMEM;
node = of_parse_phandle(dev->of_node, "flash", 0);
if (!node) {
dev_err(dev, "Didn't find host pnor flash node\n");
return -ENODEV;
}
rc = of_address_to_resource(node, 1, &resm);
of_node_put(node);
if (rc) {
dev_err(dev, "Couldn't address to resource for flash\n");
return rc;
}
lpc_ctrl->pnor_size = resource_size(&resm);
lpc_ctrl->pnor_base = resm.start;
dev_set_drvdata(&pdev->dev, lpc_ctrl);
node = of_parse_phandle(dev->of_node, "memory-region", 0);
if (!node) {
dev_err(dev, "Didn't find reserved memory\n");
return -EINVAL;
}
rc = of_address_to_resource(node, 0, &resm);
of_node_put(node);
if (rc) {
dev_err(dev, "Couldn't address to resource for reserved memory\n");
return -ENOMEM;
}
lpc_ctrl->mem_size = resource_size(&resm);
lpc_ctrl->mem_base = resm.start;
lpc_ctrl->regmap = syscon_node_to_regmap(
pdev->dev.parent->of_node);
if (IS_ERR(lpc_ctrl->regmap)) {
dev_err(dev, "Couldn't get regmap\n");
return -ENODEV;
}
lpc_ctrl->clk = devm_clk_get(dev, NULL);
if (IS_ERR(lpc_ctrl->clk)) {
dev_err(dev, "couldn't get clock\n");
return PTR_ERR(lpc_ctrl->clk);
}
rc = clk_prepare_enable(lpc_ctrl->clk);
if (rc) {
dev_err(dev, "couldn't enable clock\n");
return rc;
}
lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
lpc_ctrl->miscdev.name = DEVICE_NAME;
lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops;
lpc_ctrl->miscdev.parent = dev;
rc = misc_register(&lpc_ctrl->miscdev);
if (rc) {
dev_err(dev, "Unable to register device\n");
goto err;
}
dev_info(dev, "Loaded at %pr\n", &resm);
return 0;
err:
clk_disable_unprepare(lpc_ctrl->clk);
return rc;
}
static int aspeed_lpc_ctrl_remove(struct platform_device *pdev)
{
struct aspeed_lpc_ctrl *lpc_ctrl = dev_get_drvdata(&pdev->dev);
misc_deregister(&lpc_ctrl->miscdev);
clk_disable_unprepare(lpc_ctrl->clk);
return 0;
}
static const struct of_device_id aspeed_lpc_ctrl_match[] = {
{ .compatible = "aspeed,ast2400-lpc-ctrl" },
{ .compatible = "aspeed,ast2500-lpc-ctrl" },
{ },
};
static struct platform_driver aspeed_lpc_ctrl_driver = {
.driver = {
.name = DEVICE_NAME,
.of_match_table = aspeed_lpc_ctrl_match,
},
.probe = aspeed_lpc_ctrl_probe,
.remove = aspeed_lpc_ctrl_remove,
};
module_platform_driver(aspeed_lpc_ctrl_driver);
MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Cyril Bur <cyrilbur@gmail.com>");
MODULE_DESCRIPTION("Control for aspeed 2400/2500 LPC HOST to BMC mappings");
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...