| 814b0a6 | Roland Dreier | 17 February 2011, 22:04:59 UTC | Merge branches 'nes' and 'qib' into for-next | 17 February 2011, 22:04:59 UTC |
| c0af2c0 | Mike Marciniszyn | 16 February 2011, 15:48:25 UTC | IB/qib: Prevent double completions after a timeout or RNR error There is a double completion associated with error handling for RC QPs. The sequence is: - The do_rc_ack() routine fields an RNR nack and there are 0 rnr_retries configured on the QP. - qib_error_qp() stops the pending timer - qib_rc_send_complete() is called from sdma_complete() - qib_rc_send_complete() starts the timer because the msb of the psn just completed says an ack is needed. - a bunch of flushes occur as ipoib posts WQEs to an error'ed QP - rc_timeout() calls qib_restart_rc() - qib_restart_rc() calls qib_send_complete() with a IB_WC_RETRY_EXC_ERR on a wqe that has already been completed in the past The fix avoids starting the timer since another packet will never arrive. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 17 February 2011, 22:04:50 UTC |
| 414ed90 | Mike Marciniszyn | 10 February 2011, 14:11:28 UTC | IB/qib: Fix double add_timer() The following panic BUG_ON occurs during qib testing: Kernel BUG at include/linux/timer.h:82 RIP [<ffffffff881f7109>] :ib_qib:start_timer+0x73/0x89 RSP <ffffffff80425bd0> <0>Kernel panic - not syncing: Fatal exception <0>Dumping qib trace buffer from panic qib_set_lid INFO: IB0:1 got a lid: 0xf8 Done dumping qib trace buffer BUG: warning at kernel/panic.c:137/panic() (Tainted: G The flaw is due to a missing state test when processing responses that results in an add_timer() call when the same timer is already queued. This code was executing in parallel with a QP destroy on another CPU that had changed the state to reset, but the missing test caused to response handling code to run on into the panic. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 10 February 2011, 19:24:08 UTC |
| 25a54a6 | Maciej Sosnowski | 03 February 2011, 23:55:26 UTC | RDMA/nes: Don't generate async events for unregistered devices nes_port_ibevent() should not be called when the nes RDMA device is not registered with the RDMA core. Add missing checks of of_device_registered flag. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 03 February 2011, 23:55:26 UTC |
| 831d52b | Suresh Siddha | 03 February 2011, 20:20:04 UTC | x86, mm: avoid possible bogus tlb entries by clearing prev mm_cpumask after switching mm Clearing the cpu in prev's mm_cpumask early will avoid the flush tlb IPI's while the cr3 is still pointing to the prev mm. And this window can lead to the possibility of bogus TLB fills resulting in strange failures. One such problematic scenario is mentioned below. T1. CPU-1 is context switching from mm1 to mm2 context and got a NMI etc between the point of clearing the cpu from the mm_cpumask(mm1) and before reloading the cr3 with the new mm2. T2. CPU-2 is tearing down a specific vma for mm1 and will proceed with flushing the TLB for mm1. It doesn't send the flush TLB to CPU-1 as it doesn't see that cpu listed in the mm_cpumask(mm1). T3. After the TLB flush is complete, CPU-2 goes ahead and frees the page-table pages associated with the removed vma mapping. T4. CPU-2 now allocates those freed page-table pages for something else. T5. As the CR3 and TLB caches for mm1 is still active on CPU-1, CPU-1 can potentially speculate and walk through the page-table caches and can insert new TLB entries. As the page-table pages are already freed and being used on CPU-2, this page walk can potentially insert a bogus global TLB entry depending on the (random) contents of the page that is being used on CPU-2. T6. This bogus TLB entry being global will be active across future CR3 changes and can result in weird memory corruption etc. To avoid this issue, for the prev mm that is handing over the cpu to another mm, clear the cpu from the mm_cpumask(prev) after the cr3 is changed. Marking it for -stable, though we haven't seen any reported failure that can be attributed to this. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: stable@kernel.org [v2.6.32+] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 21:32:39 UTC |
| 9118626 | Linus Torvalds | 03 February 2011, 19:19:26 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Update missed conversion of flush_scheduled_work() RDMA/ucma: Copy iWARP route information on queries RDMA/amso1100: Fix compile warnings RDMA/cxgb4: Set the correct device physical function for iWARP connections RDMA/cxgb4: Limit MAXBURST EQ context field to 256B IB/qib: Hold link for TX SERDES settings mlx4_core: Add ConnectX-3 device IDs | 03 February 2011, 19:19:26 UTC |
| aba9943 | Linus Torvalds | 03 February 2011, 17:17:41 UTC | Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Prevent irq storm on migration | 03 February 2011, 17:17:41 UTC |
| 49abda9 | Linus Torvalds | 03 February 2011, 16:55:07 UTC | Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix update_curr_rt() sched, docs: Update schedstats documentation to version 15 | 03 February 2011, 16:55:07 UTC |
| eb487ab | Linus Torvalds | 03 February 2011, 16:52:05 UTC | Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix reading in perf_event_read() watchdog: Don't change watchdog state on read of sysctl watchdog: Fix sysctl consistency watchdog: Fix broken nowatchdog logic perf: Fix Pentium4 raw event validation perf: Fix alloc_callchain_buffers() | 03 February 2011, 16:52:05 UTC |
| 06c3bc6 | Peter Zijlstra | 02 February 2011, 12:19:48 UTC | sched: Fix update_curr_rt() cpu_stopper_thread() migration_cpu_stop() __migrate_task() deactivate_task() dequeue_task() dequeue_task_rq() update_curr_rt() Will call update_curr_rt() on rq->curr, which at that time is rq->stop. The problem is that rq->stop.prio matches an RT prio and thus falsely assumes its a rt_sched_class task. Reported-Debuged-Tested-Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Cc: stable@kernel.org # .37 Signed-off-by: Ingo Molnar <mingo@elte.hu> | 03 February 2011, 11:21:33 UTC |
| 542e72f | Peter Zijlstra | 26 January 2011, 14:38:35 UTC | perf: Fix reading in perf_event_read() It is quite possible for the event to have been disabled between perf_event_read() sending the IPI and the CPU servicing the IPI and calling __perf_event_read(), hence revalidate the state. Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 03 February 2011, 11:15:46 UTC |
| 0b0abea | Boaz Harrosh | 02 February 2011, 19:02:12 UTC | Revert "exofs: Set i_mapping->backing_dev_info anyway" This reverts commit 115e19c53501edc11f730191f7f047736815ae3d. Apparently setting inode->bdi to one's own sb->s_bdi stops VFS from sending *read-aheads*. This problem was bisected to this commit. A revert fixes it. I'll investigate farther why is this happening for the next Kernel, but for now a revert. I'm sending to stable@kernel.org as well, since it exists also in 2.6.37. 2.6.36 is good and does not have this patch. CC: Stable Tree <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 01:53:27 UTC |
| f2f1756 | Linus Torvalds | 03 February 2011, 01:52:19 UTC | Merge branch 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] fix saa7111 non-detection [media] rc/streamzap: fix reporting response times [media] mceusb: really fix remaining keybounce issues [media] rc: use time unit conversion macros correctly [media] rc/ir-lirc-codec: add back debug spew [media] ir-kbd-i2c: improve remote behavior with z8 behind usb [media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send [media] hdpvr: fix up i2c device registration [media] rc/mce: add mappings for missing keys [media] gspca - zc3xx: Discard the partial frames [media] gspca - zc3xx: Fix bad images with the sensor hv7131r [media] gspca - zc3xx: Bad delay when given by a table | 03 February 2011, 01:52:19 UTC |
| b8ef289 | Linus Torvalds | 03 February 2011, 01:51:31 UTC | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] reset default for CONFIG_CHSC_SCH [S390] qdio: prevent compile warning under CONFIG_32BIT [S390] use asm-generic/cacheflush.h [S390] tlb: fix build error caused by THP [S390] missing sacf in uaccess [S390] pgtable_list corruption [S390] dasd: prevent panic with unresumed devices | 03 February 2011, 01:51:31 UTC |
| d54cdc8 | Josef Bacik | 01 February 2011, 23:52:47 UTC | fs: make block fiemap mapping length at least blocksize long Some filesystems don't deal well with being asked to map less than blocksize blocks (GFS2 for example). Since we are always mapping at least blocksize sections anyway, just make sure len is at least as big as a blocksize so we don't trip up any filesystems. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:20 UTC |
| 3cd90ea | Namhyung Kim | 01 February 2011, 23:52:46 UTC | vfs: sparse: add __FMODE_EXEC FMODE_EXEC is a constant type of fmode_t but was used with normal integer constants. This results in following warnings from sparse. Fix it using new macro __FMODE_EXEC. fs/exec.c:116:58: warning: restricted fmode_t degrades to integer fs/exec.c:689:58: warning: restricted fmode_t degrades to integer fs/fcntl.c:777:9: warning: restricted fmode_t degrades to integer Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:19 UTC |
| 1a44bc8 | Namhyung Kim | 01 February 2011, 23:52:46 UTC | vfs: sparse: remove a warning on OPEN_FMODE() AND-ing FMODE_* constant with normal integer results in following sparse warnings. Fix it. fs/open.c:662:21: warning: restricted fmode_t degrades to integer fs/anon_inodes.c:123:34: warning: restricted fmode_t degrades to integer Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:19 UTC |
| 3751d60 | KAMEZAWA Hiroyuki | 01 February 2011, 23:52:45 UTC | memcg: fix event counting breakage from recent THP update Changes in e401f1761 ("memcg: modify accounting function for supporting THP better") adds nr_pages to support multiple page size in memory_cgroup_charge_statistics. But counting the number of event nees abs(nr_pages) for increasing counters. This patch fixes event counting. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:19 UTC |
| 8493ae4 | Johannes Weiner | 01 February 2011, 23:52:44 UTC | memcg: never OOM when charging huge pages Huge page coverage should obviously have less priority than the continued execution of a process. Never kill a process when charging it a huge page fails. Instead, give up after the first failed reclaim attempt and fall back to regular pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:19 UTC |
| 1994282 | Johannes Weiner | 01 February 2011, 23:52:43 UTC | memcg: prevent endless loop when charging huge pages to near-limit group If reclaim after a failed charging was unsuccessful, the limits are checked again, just in case they settled by means of other tasks. This is all fine as long as every charge is of size PAGE_SIZE, because in that case, being below the limit means having at least PAGE_SIZE bytes available. But with transparent huge pages, we may end up in an endless loop where charging and reclaim fail, but we keep going because the limits are not yet exceeded, although not allowing for a huge page. Fix this up by explicitely checking for enough room, not just whether we are within limits. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:19 UTC |
| 9221edb | Johannes Weiner | 01 February 2011, 23:52:42 UTC | memcg: prevent endless loop when charging huge pages The charging code can encounter a charge size that is bigger than a regular page in two situations: one is a batched charge to fill the per-cpu stocks, the other is a huge page charge. This code is distributed over two functions, however, and only the outer one is aware of huge pages. In case the charging fails, the inner function will tell the outer function to retry if the charge size is bigger than regular pages--assuming batched charging is the only case. And the outer function will retry forever charging a huge page. This patch makes sure the inner function can distinguish between batch charging and a single huge page charge. It will only signal another attempt if batch charging failed, and go into regular reclaim when it is called on behalf of a huge page. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:19 UTC |
| af241a0 | Jin Dongming | 01 February 2011, 23:52:41 UTC | thp: fix unsuitable behavior for hwpoisoned tail page When a tail page of THP is poisoned, memory-failure will do nothing except setting PG_hwpoison, while the expected behavior is that the process, who is using the poisoned tail page, should be killed. The above problem is caused by lru check of the poisoned tail page of THP. Because PG_lru flag is only set on the head page of THP, the check always consider the poisoned tail page as NON lru page. So the lru check for the tail page of THP should be avoided, as like as hugetlb. This patch adds !PageTransCompound() before lru check for THP, because of the check (!PageHuge() && !PageTransCompound()) the whole branch could be optimized away at build time when both hugetlbfs and THP are set with "N" (or in archs not supporting either of those). [akpm@linux-foundation.org: fix unrelated typo in shake_page() comment] Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:19 UTC |
| a6d30dd | Jin Dongming | 01 February 2011, 23:52:40 UTC | thp: fix the wrong reported address of hwpoisoned hugepages When the tail page of THP is poisoned, the head page will be poisoned too. And the wrong address, address of head page, will be sent with sigbus always. So when the poisoned page is used by Guest OS which is running on KVM, after the address changing(hva->gpa) by qemu, the unexpected process on Guest OS will be killed by sigbus. What we expected is that the process using the poisoned tail page could be killed on Guest OS, but not that the process using the healthy head page is killed. Since it is not good to poison the healthy page, avoid poisoning other than the page which is really poisoned. (While we poison all pages in a huge page in case of hugetlb, we can do this for THP thanks to split_huge_page().) Here we fix two parts: 1. Isolate the poisoned page only to make sure the reported address is the address of poisoned page. 2. make the poisoned page work as the poisoned regular page. [akpm@linux-foundation.org: fix spello in comment] Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:19 UTC |
| efeda7a | Jin Dongming | 01 February 2011, 23:52:39 UTC | thp: fix splitting of hwpoisoned hugepages The poisoned THP is now split with split_huge_page() in collect_procs_anon(). If kmalloc() is failed in collect_procs(), split_huge_page() could not be called. And the work after split_huge_page() for collecting the processes using poisoned page will not be done, too. So the processes using the poisoned page could not be killed. The condition becomes worse when CONFIG_DEBUG_VM == "Y". Because the poisoned THP could not be split, system panic will be caused by VM_BUG_ON(PageTransHuge(page)) in try_to_unmap(). This patch does: 1. move split_huge_page() to the place before collect_procs(). This can be sure the failure of splitting THP is caused by itself. 2. when splitting THP is failed, stop the operations after it. This can avoid unexpected system panic or non sense works. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:19 UTC |
| b16957c | Ben Dooks | 01 February 2011, 23:52:38 UTC | MAINTAINERS: fixup Simtec support email entries The support@simtec.co.uk address is for direct customer support only, the EB2410ITX and EB110ATX entries should direct to the Simtec Linux Team address of linux@simtec.co.uk Also add correct email address for Vincent Sanders [akpm@linux-foundation.org: fix Vincent's address] Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Vincent Sanders <vince@simtec.co.uk> Cc: Simtec Support <support@simtec.co.uk> Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: Jack Stone <jwjstone@fastmail.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:18 UTC |
| 5832203 | Ben Dooks | 01 February 2011, 23:52:37 UTC | MAINTAINERS: fixup file entries for "SIMTEC EB2410ITX (BAST)" Add the correct files for the Simtec BAST machine, ensuring the IDE and IRQ routing are added, and move to the machine specific file instead of trying to catch all of arch/arm/mach-s3c2410 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: Simtec Support <support@simtec.co.uk> Cc: Jack Stone <jwjstone@fastmail.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:18 UTC |
| eb2ffca | Ben Dooks | 01 February 2011, 23:52:36 UTC | MAINTAINERS: move s3c2410 drivers to ARM/SAMSUNG ARM There are currently two entries under the "SIMTEC EB2410ITX (BAST)" machine entry for drivers/*/*s3c2410*, which is catching everything s3c2410 driver related. This entry is for a specific S3C2410 based machine, so move these two file entries to the "ARM/SAMSUNG ARM ARCHITECTURES" entry, where it will reach a wider audience of interested parties. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Simtec Linux Team <linux@simtec.co.uk> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Jack Stone <jwjstone@fastmail.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:18 UTC |
| 0781b90 | Eric Dumazet | 01 February 2011, 23:52:35 UTC | epoll: epoll_wait() should not use timespec_add_ns() commit 95aac7b1cd224f ("epoll: make epoll_wait() use the hrtimer range feature") added a performance regression because it uses timespec_add_ns() with potential very large 'ns' values. [akpm@linux-foundation.org: s/epoll_set_mstimeout/ep_set_mstimeout/, per Davide] Reported-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Shawn Bohrer <shawn.bohrer@gmail.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: <stable@kernel.org> [2.6.37.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:18 UTC |
| 48db54e | Minchan Kim | 01 February 2011, 23:52:33 UTC | mm/migration: fix page corruption during hugepage migration If migrate_huge_page by memory-failure fails , it calls put_page in itself to decrease page reference and caller of migrate_huge_page also calls putback_lru_pages. It can do double free of page so it can make page corruption on page holder. In addtion, clean of pages on caller is consistent behavior with migrate_pages by cf608ac19c ("mm: compaction: fix COMPACTPAGEFAILED counting"). Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:18 UTC |
| 57fc4a5 | Andrea Arcangeli | 01 February 2011, 23:52:32 UTC | mm: when migrate_pages returns 0, all pages must have been released In some cases migrate_pages could return zero while still leaving a few pages in the pagelist (and some caller wouldn't notice it has to call putback_lru_pages after commit cf608ac19c9 ("mm: compaction: fix COMPACTPAGEFAILED counting")). Add one missing putback_lru_pages not added by commit cf608ac19c95 ("mm: compaction: fix COMPACTPAGEFAILED counting"). Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Lameter <cl@linux.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:18 UTC |
| 552b372 | Michal Hocko | 01 February 2011, 23:52:31 UTC | memsw: deprecate noswapaccount kernel parameter and schedule it for removal noswapaccount couldn't be used to control memsw for both on/off cases so we have added swapaccount[=0|1] parameter. This way we can turn the feature in two ways noswapaccount resp. swapaccount=0. We have kept the original noswapaccount but I think we should remove it after some time as it just makes more command line parameters without any advantages and also the code to handle parameters is uglier if we want both parameters. Signed-off-by: Michal Hocko <mhocko@suse.cz> Requested-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:18 UTC |
| fceda1b | Michal Hocko | 01 February 2011, 23:52:30 UTC | memsw: handle swapaccount kernel parameter correctly __setup based kernel command line parameters handlers which are handled in obsolete_checksetup are provided with the parameter value including = (more precisely everything right after the parameter name). This means that the current implementation of swapaccount[=1|0] doesn't work at all because if there is a value for the parameter then we are testing for "0" resp. "1" but we are getting "=0" resp. "=1" and if there is no parameter value we are getting an empty string rather than NULL. The original noswapccount parameter, which doesn't care about the value, works correctly. Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 February 2011, 00:03:18 UTC |
| f1a0639 | Thomas Gleixner | 28 January 2011, 07:47:15 UTC | genirq: Prevent irq storm on migration move_native_irq() masks and unmasks the interrupt line unconditionally, but the interrupt line might be masked due to a threaded oneshot handler in progress. Unmasking the line in that case can lead to interrupt storms. Observed on PREEMPT_RT. Originally-from: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org | 02 February 2011, 21:15:08 UTC |
| afe8a88 | Linus Torvalds | 01 February 2011, 23:23:58 UTC | Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix ASM optimized code for LE microblaze: Fix unaligned issue on MMU system with BS=0 DIV=1 microblaze: Fix DTB passing from bootloader | 01 February 2011, 23:23:58 UTC |
| 405b864 | Linus Torvalds | 01 February 2011, 23:22:40 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: fix length checks in checkSMB [CIFS] Update cifs minor version cifs: No need to check crypto blockcipher allocation cifs: clean up some compiler warnings cifs: make CIFS depend on CRYPTO_MD4 cifs: force a reconnect if there are too many MIDs in flight cifs: don't pop a printk when sending on a socket is interrupted cifs: simplify SMB header check routine cifs: send an NT_CANCEL request when a process is signalled cifs: handle cancelled requests better cifs: fix two compiler warning about uninitialized vars | 01 February 2011, 23:22:40 UTC |
| fdf4c58 | Michel Lespinasse | 01 February 2011, 01:03:41 UTC | mlock: operate on any regions with protection != PROT_NONE As Tao Ma noticed, change 5ecfda0 breaks blktrace. This is because blktrace mmaps a file with PROT_WRITE permissions but without PROT_READ, so my attempt to not unnecessarity break COW during mlock ended up causing mlock to fail with a permission problem. I am proposing to let mlock ignore vma protection in all cases except PROT_NONE. In particular, mlock should not fail for PROT_WRITE regions (as in the blktrace case, which broke at 5ecfda0) or for PROT_EXEC regions (which seem to me like they were always broken). Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 February 2011, 23:20:50 UTC |
| 69bc70d | Randy Dunlap | 01 February 2011, 19:17:28 UTC | gpu/stub: fix acpi_video build error, fix stub kconfig dependencies The comments under "config STUB_POULSBO" are close to correct, but they are not being followed. This patch updates them to reflect the requirements for THERMAL. This build error is caused by STUB_POULSBO selecting ACPI_VIDEO when ACPI_VIDEO's config requirements are not met. ERROR: "thermal_cooling_device_register" [drivers/acpi/video.ko] undefined! ERROR: "thermal_cooling_device_unregister" [drivers/acpi/video.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 February 2011, 23:18:42 UTC |
| 1e1dbb2 | Javi Merino | 31 January 2011, 23:11:36 UTC | sched, docs: Update schedstats documentation to version 15 Version 15 of schedstats was introduced in: 67aa0f767af4: sched: remove unused fields from struct rq and removed three unused counters in sched_yield(). Update the documentation. Signed-off-by: Javi Merino <cibervicho@gmail.com> Cc: henrix@sapo.pt Cc: rdunlap@xenotime.net Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1296515496-8229-1-git-send-email-cibervicho@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 01 February 2011, 08:07:13 UTC |
| ebf5382 | Linus Torvalds | 01 February 2011, 03:05:49 UTC | Linux 2.6.38-rc3 | 01 February 2011, 03:05:49 UTC |
| 0fd08c5 | Linus Torvalds | 31 January 2011, 23:41:02 UTC | Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: NFSv4 readdir loses entries NFS: Micro-optimize nfs4_decode_dirent() NFS: Fix an NFS client lockdep issue NFS construct consistent co_ownerid for v4.1 NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount NFS improve pnfs_put_deviceid_cache debug print NFS fix cb_sequence error processing NFS do not find client in NFSv4 pg_authenticate NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!" NFS: Prevent memory allocation failure in nfsacl_encode() NFS: nfsacl_{encode,decode} should return signed integer NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!" NFS: Fix "kernel BUG at fs/aio.c:554!" NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds(). NFS: fix handling of malloc failure during nfs_flush_multi() | 31 January 2011, 23:41:02 UTC |
| 6284644 | Jeff Layton | 31 January 2011, 14:14:17 UTC | cifs: fix length checks in checkSMB The cERROR message in checkSMB when the calculated length doesn't match the RFC1001 length is incorrect in many cases. It always says that the RFC1001 length is bigger than the SMB, even when it's actually the reverse. Fix the error message to say the reverse of what it does now when the SMB length goes beyond the end of the received data. Also, clarify the error message when the RFC length is too big. Finally, clarify the comments to show that the 512 byte limit on extra data at the end of the packet is arbitrary. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 31 January 2011, 22:35:37 UTC |
| 7921127 | Linus Torvalds | 31 January 2011, 22:30:31 UTC | Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm * 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: smp_on_up: allow non-ARM SMP processors ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+ ARM: initrd: disable initrd if passed address overlaps reserved region ARM: footbridge: fix debug macros ARM: mmci: round down the bytes transferred on error ARM: mmci: complete the transaction on error ARM: 6642/1: mmci: calculate remaining bytes at error correctly | 31 January 2011, 22:30:31 UTC |
| 35a8524 | Linus Torvalds | 31 January 2011, 22:27:55 UTC | Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR arm: omap2: mux: fix compile warning omap1: Simplify use of omap_irq_flags omap2+: Fix unused variable warning for omap_irq_base | 31 January 2011, 22:27:55 UTC |
| ffbbf2d | Randy Dunlap | 31 January 2011, 17:29:14 UTC | kernel.h: fix kernel-doc warning Fix kernel-doc warning in kernel.h from commit 7ef88ad56145 ("BUILD_BUG_ON: make it handle more cases"): Warning(include/linux/kernel.h:605): No description found for parameter 'condition' Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 31 January 2011, 22:23:22 UTC |
| fb9f1f1 | Linus Torvalds | 31 January 2011, 22:15:40 UTC | Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs * 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: xfs_bmap_add_extent_delay_real should init br_startblock xfs: fix dquot shaker deadlock xfs: handle CIl transaction commit failures correctly xfs: limit extsize to size of AGs and/or MAXEXTLEN xfs: prevent extsize alignment from exceeding maximum extent size xfs: limit extent length for allocation to AG size xfs: speculative delayed allocation uses rounddown_power_of_2 badly xfs: fix efi item leak on forced shutdown xfs: fix log ticket leak on forced shutdown. | 31 January 2011, 22:15:40 UTC |
| 2426ec8 | Michael S. Tsirkin | 31 January 2011, 06:16:20 UTC | virtio: update MAINTAINERS Patches should keep coming through Rusty but it helps if I'm Cc'd as well. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 31 January 2011, 22:09:13 UTC |
| cbae487 | Linus Torvalds | 31 January 2011, 22:07:40 UTC | Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits) usb: gadget: composite: avoid access beyond array max length USB: serial: handle Data Carrier Detect changes USB: gadget: Fix endpoint representation in ci13xxx_udc USB: gadget: Fix error path in ci13xxx_udc gadget probe function usb: pch_udc: Fix the worning log issue at gadget driver remove USB: serial: Updated support for ICOM devices USB: ehci-mxc: add work-around for efika mx/sb bug USB: unbreak ehci-mxc on otg port of i.MX27 drivers: update to pl2303 usb-serial to support Motorola cables USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products USB serial: add missing .usb_driver field in serial drivers USB: ehci-fsl: Fix 'have_sysif_regs' detection USB: g_printer: fix bug in module parameter definitions USB: g_printer: fix bug in unregistration USB: uss720: remove duplicate USB device MAINTAINERS: add ueagle-atm entry USB: EHCI: fix DMA deallocation bug USB: pch_udc: support new device ML7213 IOH usb: pch_udc: Fixed issue which does not work with g_serial usb: set ep_dev async suspend should be later than device_initialize ... | 31 January 2011, 22:07:40 UTC |
| fb1c634 | Linus Torvalds | 31 January 2011, 22:06:31 UTC | Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits) staging: r8712u: Add new device IDs staging: brcm80211: fix suspend/resume issue in brcmsmac staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel Staging: iio: Aditional fixpoint formatted output bugfix staging: usbip: vhci: use urb->dev->portnum to find port staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO staging: usbip: vhci: friendly log messages for connection errors staging: usbip: vhci: refuse to enqueue for dead connections staging: usbip: vhci: give back URBs from in-flight unlink requests staging: usbip: vhci: update reference count for usb_device staging: usbip: stub: update refcounts for devices and interfaces staging: tidspbridge: replace mbox callback with notifier_call staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card Staging: speakup: &&/|| confusion in silent_store() iio: Fixpoint formatted output bugfix staging: rt2860: Fix incorrect netif_stop_queue usage warning staging: r8712u: Fix memory leak in firmware loading staging: tidspbridge: configure full L1 MMU range staging: rt2870sta: Add ID for Linksys WUSB100v2 Staging: xgfib: put parenthesis in the right place ... | 31 January 2011, 22:06:31 UTC |
| abfa44b | Linus Torvalds | 31 January 2011, 22:05:19 UTC | Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty/serial: fix apbuart build n_hdlc: fix read and write locking serial: unbreak billionton CF card tty: use for_each_console() and WARN() on sysfs failures vt: fix issue when fbcon wants to takeover a second time. Fix up trivial conflict in drivers/tty/tty_io.c | 31 January 2011, 22:05:19 UTC |
| cab6958 | Steve French | 31 January 2011, 21:56:35 UTC | [CIFS] Update cifs minor version Signed-off-by: Steve French <sfrench@us.ibm.com> | 31 January 2011, 21:56:35 UTC |
| e98ff0f | Russell King | 30 January 2011, 16:40:20 UTC | ARM: smp_on_up: allow non-ARM SMP processors Allow non-ARM SMP processors to use the SMP_ON_UP feature. CPUs supporting SMP must have the new CPU ID format, so check for this first. Then check for ARM11MPCore, which fails the MPIDR check. Lastly check the MPIDR reports multiprocessing extensions and that the CPU is part of a multiprocessing system. Cc: <stable@kernel.org> Reported-and-Tested-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 31 January 2011, 21:48:53 UTC |
| 7a8587e | Shirish Pargaonkar | 29 January 2011, 19:54:58 UTC | cifs: No need to check crypto blockcipher allocation Missed one change as per earlier suggestion. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 31 January 2011, 17:29:18 UTC |
| bed3c1d | Russell King | 30 January 2011, 13:03:30 UTC | [media] fix saa7111 non-detection One saa7111 device is reporting a different ID: saa7115 0-0024: chip found @ 0x48 (ID 0f7111d0e111111) does not match a known saa711x chip. As this is for sure a saa7111, change the detection code to also cover this device. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 31 January 2011, 16:19:50 UTC |
| 31c2659 | Jeff Layton | 31 January 2011, 12:24:46 UTC | cifs: clean up some compiler warnings New compiler warnings that I noticed when building a patchset based on recent Fedora kernel: fs/cifs/cifssmb.c: In function 'CIFSSMBSetFileSize': fs/cifs/cifssmb.c:4813:8: warning: variable 'data_offset' set but not used [-Wunused-but-set-variable] fs/cifs/file.c: In function 'cifs_open': fs/cifs/file.c:349:24: warning: variable 'pCifsInode' set but not used [-Wunused-but-set-variable] fs/cifs/file.c: In function 'cifs_partialpagewrite': fs/cifs/file.c:1149:23: warning: variable 'cifs_sb' set but not used [-Wunused-but-set-variable] fs/cifs/file.c: In function 'cifs_iovec_write': fs/cifs/file.c:1740:9: warning: passing argument 6 of 'CIFSSMBWrite2' from incompatible pointer type [enabled by default] fs/cifs/cifsproto.h:337:12: note: expected 'unsigned int *' but argument is of type 'size_t *' fs/cifs/readdir.c: In function 'cifs_readdir': fs/cifs/readdir.c:767:23: warning: variable 'cifs_sb' set but not used [-Wunused-but-set-variable] fs/cifs/cifs_dfs_ref.c: In function 'cifs_dfs_d_automount': fs/cifs/cifs_dfs_ref.c:342:2: warning: 'rc' may be used uninitialized in this function [-Wuninitialized] fs/cifs/cifs_dfs_ref.c:278:6: note: 'rc' was declared here Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com> | 31 January 2011, 15:39:10 UTC |
| f855f6c | Jeff Layton | 31 January 2011, 13:41:36 UTC | cifs: make CIFS depend on CRYPTO_MD4 Recently CIFS was changed to use the kernel crypto API for MD4 hashes, but the Kconfig dependencies were not changed to reflect this. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reported-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 31 January 2011, 15:26:07 UTC |
| 56b0ec3 | Jarod Wilson | 27 January 2011, 18:08:35 UTC | [media] rc/streamzap: fix reporting response times The streamzap driver has relatively low sampling resolution, and any delays in reporting events seem to cause some minor problems for the likes of irw when using the lirc bridge driver, resulting in a single keypress registering as multiple independent ones, rather than as a single press with repeats. If we call ir_raw_event_handle() more frequently and reset the rawir kfifo at end-of-signal, the behavior improves quite a bit. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 31 January 2011, 14:22:13 UTC |
| 5bd9d73 | Jarod Wilson | 26 January 2011, 15:20:09 UTC | [media] mceusb: really fix remaining keybounce issues Make sure rawir struct is zeroed out before populating it for each ir_raw_event_store_with_filter() call, and when we see a trailing 0x80 packet (end-of-data), issue an ir_raw_event_reset() call. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 31 January 2011, 14:20:35 UTC |
| b4608fa | Jarod Wilson | 18 January 2011, 20:31:24 UTC | [media] rc: use time unit conversion macros correctly Due to my own stupidity, some of the wrong time unit conversion macros were being used inside some of the IR drivers I've been working on. Fix that, and convert over some additional places to also use the macros. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 31 January 2011, 14:20:11 UTC |
| 457e2ff | Jarod Wilson | 18 January 2011, 05:33:08 UTC | [media] rc/ir-lirc-codec: add back debug spew Some occasionally useful debug spew disappeared as part of a feature update a while back, and I'm finding myself in need of it again to help diagnose some issues. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 31 January 2011, 14:19:42 UTC |
| 8df5991 | Jarod Wilson | 20 January 2011, 21:31:18 UTC | [media] ir-kbd-i2c: improve remote behavior with z8 behind usb Add the same "are you ready?" i2c_master_send() poll command to get_key_haup_xvr found in lirc_zilog, which is apparently seen in the Windows driver for the PVR-150 w/a z8. This stabilizes what is received from both the HD-PVR and HVR-1950, even with their polling intervals at the default of 100, thus the removal of the custom 260ms polling_interval in pvrusb2-i2c-core.c. Acked-by: Andy Walls <awalls@md.metrocast.net> Acked-by: Mike Isely <isely@isely.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 31 January 2011, 14:19:15 UTC |
| 5766d20 | Jarod Wilson | 19 January 2011, 21:49:19 UTC | [media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send Both the HD-PVR and HVR-1950, driven by the hdpvr and pvrusb2 drivers respectively, have a zilog z8 chip exposed via i2c. These are both usb-connected devices, and on both of them, back-to-back i2c_master_send calls that work fine with a z8 on a pci card fail with a -EIO, as the chip isn't yet ready from the prior command. To cope with that, add a delay and retry loop where necessary. Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 31 January 2011, 14:18:42 UTC |
| 7f2a06d | Jarod Wilson | 19 January 2011, 21:10:14 UTC | [media] hdpvr: fix up i2c device registration We have to actually call i2c_new_device() once for each of the rx and tx addresses. Also improve error-handling and device remove i2c cleanup. Reviewed-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 31 January 2011, 14:18:04 UTC |
| 86ee659 | Jarod Wilson | 18 January 2011, 05:27:45 UTC | [media] rc/mce: add mappings for missing keys Per http://mediacenterguides.com/book/export/html/31 and investigation by Erin, we were missing these last three mappings to complete the mce key table. Lets remedy that. Reported-by: Erin Simonds <fisslefink@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 31 January 2011, 14:16:52 UTC |
| a5ecdfb | Jean-François Moine | 24 January 2011, 19:31:58 UTC | [media] gspca - zc3xx: Discard the partial frames In some cases, some frames may not end with the JPEG end of frame. Being not complete, they are now discarded. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 31 January 2011, 14:05:48 UTC |
| 3d24406 | Jean-François Moine | 24 January 2011, 19:22:11 UTC | [media] gspca - zc3xx: Fix bad images with the sensor hv7131r The problem was introduced by the commit 2af0b4c60cc0daf0. Some registers were no more initialized. Tested-by: <Giovanni Scafora giovanni@archlinux.org> Tested-by: <Sergey Manucharian sm@ingeniware.com> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 31 January 2011, 14:05:26 UTC |
| 7c45f2c | Jean-François Moine | 24 January 2011, 18:15:34 UTC | [media] gspca - zc3xx: Bad delay when given by a table Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 31 January 2011, 14:04:25 UTC |
| 9ffdc6c | Marcin Slusarz | 28 January 2011, 16:00:33 UTC | watchdog: Don't change watchdog state on read of sysctl Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> [ add {}'s to fix a warning ] Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org> LKML-Reference: <1296230433-6261-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 31 January 2011, 12:22:43 UTC |
| 3973576 | Marcin Slusarz | 28 January 2011, 16:00:32 UTC | watchdog: Fix sysctl consistency If it was not possible to enable watchdog for any cpu, switch watchdog_enabled back to 0, because it's visible via kernel.watchdog sysctl. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org> LKML-Reference: <1296230433-6261-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 31 January 2011, 12:22:43 UTC |
| 4135038 | Marcin Slusarz | 28 January 2011, 16:00:31 UTC | watchdog: Fix broken nowatchdog logic Passing nowatchdog to kernel disables 2 things: creation of watchdog threads AND initialization of percpu watchdog_hrtimer. As hrtimers are initialized only at boot it's not possible to enable watchdog later - for me all watchdog threads started to eat 100% of CPU time, but they could just crash. Additionally, even if these threads would start properly, watchdog_disable_all_cpus was guarded by no_watchdog check, so you couldn't disable watchdog. To fix this, remove no_watchdog variable and use already existing watchdog_enabled variable. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> [ removed another no_watchdog instance ] Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org> LKML-Reference: <1296230433-6261-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 31 January 2011, 12:22:42 UTC |
| c192802 | Russell King | 30 January 2011, 11:29:40 UTC | ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+ Ensure that the ISA/PCI IO space accessors are properly ordered on ARMv6+ architectures. These should always be ordered with respect to all other accesses. This also fixes __iormb() and __iowmb() not being visible to ioread/ iowrite if a platform defines its own MMIO accessors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 31 January 2011, 10:53:42 UTC |
| b0a2679 | Russell King | 30 January 2011, 11:21:05 UTC | ARM: initrd: disable initrd if passed address overlaps reserved region Disable the initrd if the passed address already overlaps the reserved region. This avoids oopses on Netwinders when NeTTrom tells the kernel that an initrd is located at mem+4MB, but this overlaps the BSS, resulting in the kernels in-use BSS being freed. This should be applied to v2.6.37-stable. Cc: <stable@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 31 January 2011, 10:53:41 UTC |
| 5f2c1b3 | Russell King | 28 January 2011, 20:57:57 UTC | ARM: footbridge: fix debug macros 0ea1293 (arm: return both physical and virtual addresses from addruart) changed the way the 'addruart' worked, making it return both the virt and phys addresses. Unfortunately, for footbridge, these were reversed. Fix that. Tested on Netwinder. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 31 January 2011, 10:53:39 UTC |
| 613b152 | Russell King | 30 January 2011, 21:06:53 UTC | ARM: mmci: round down the bytes transferred on error We should not report incomplete blocks on error. Return the number of bytes successfully transferred, rounded down to the nearest block. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 31 January 2011, 10:53:37 UTC |
| ccff9b5 | Russell King | 30 January 2011, 21:03:50 UTC | ARM: mmci: complete the transaction on error When we encounter an error, make sure we complete the transaction otherwise we'll leave the request dangling. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 31 January 2011, 10:53:23 UTC |
| d9c11b1 | Sebastian Ott | 31 January 2011, 10:30:09 UTC | [S390] reset default for CONFIG_CHSC_SCH 6f9a3c33 "[S390] cleanup s390 Kconfig" accidentally changed the default for CONFIG_CHSC_SCH. Reset it to m. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 31 January 2011, 10:30:21 UTC |
| 6fa1098 | Jan Glauber | 31 January 2011, 10:30:08 UTC | [S390] qdio: prevent compile warning under CONFIG_32BIT Prevent the following compiler warning if compiling a 31 bit kernel: drivers/s390/cio/qdio_main.c: In function ‘get_outbound_buffer_frontier’: drivers/s390/cio/qdio_main.c:646:16: warning: ‘state’ may be used uninitialized in this function CC lib/radix-tree.o CC drivers/s390/scsi/zfcp_cfdc.o drivers/s390/cio/qdio_main.c: In function ‘qdio_inbound_q_moved’: drivers/s390/cio/qdio_main.c:479:16: warning: ‘state’ may be used uninitialized in this function drivers/s390/cio/qdio_main.c:479:16: note: ‘state’ was declared here Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 31 January 2011, 10:30:21 UTC |
| 786cca8 | Akinobu Mita | 31 January 2011, 10:30:07 UTC | [S390] use asm-generic/cacheflush.h The implementation of the cache flushing interfaces on the s390 is identical with the default implementation in asm-generic. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 31 January 2011, 10:30:21 UTC |
| c84ca00 | Heiko Carstens | 31 January 2011, 10:30:06 UTC | [S390] tlb: fix build error caused by THP Fix this build error with !CONFIG_SWAP caused by tranparent huge pages support: In file included from mm/pgtable-generic.c:9:0: /linux-2.6/arch/s390/include/asm/tlb.h: In function 'tlb_remove_page': /linux-2.6/arch/s390/include/asm/tlb.h:92:2: error: implicit declaration of function 'page_cache_release' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 31 January 2011, 10:30:21 UTC |
| e4d8269 | Martin Schwidefsky | 31 January 2011, 10:30:05 UTC | [S390] missing sacf in uaccess The uaccess functions copy_in_user_std and clear_user_std fail to switch back from secondary space mode to primary space mode with sacf in case of an unresolvable page fault. We need to make sure that the switch back to primary mode is done in all cases, otherwise the code following the uaccess inline assembly will crash. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 31 January 2011, 10:30:20 UTC |
| f1be77b | Martin Schwidefsky | 31 January 2011, 10:30:04 UTC | [S390] pgtable_list corruption After page_table_free_rcu removed a page from the pgtable_list page_table_free better not add it again. Otherwise a page_table_alloc can reuse a page table fragment that is still in the rcu process. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 31 January 2011, 10:30:20 UTC |
| f602f6d | Stefan Haberland | 31 January 2011, 10:30:03 UTC | [S390] dasd: prevent panic with unresumed devices If a device is not resumed correctly the system crashes when this device is set offline. This may happen if it gets disconnected during suspend. Check if the device is already removed from alias handling and skip these steps to prevent the kernel panic. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 31 January 2011, 10:30:20 UTC |
| 92a4e0f | Jeff Layton | 29 January 2011, 12:02:28 UTC | cifs: force a reconnect if there are too many MIDs in flight Currently, we allow the pending_mid_q to grow without bound with SIGKILL'ed processes. This could eventually be a DoS'able problem. An unprivileged user could a process that does a long-running call and then SIGKILL it. If he can also intercept the NT_CANCEL calls or the replies from the server, then the pending_mid_q could grow very large, possibly even to 2^16 entries which might leave GetNextMid in an infinite loop. Fix this by imposing a hard limit of 32k calls per server. If we cross that limit, set the tcpStatus to CifsNeedReconnect to force cifsd to eventually reconnect the socket and clean out the pending_mid_q. While we're at it, clean up the function a bit and eliminate an unnecessary NULL pointer check. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 31 January 2011, 04:38:15 UTC |
| d804d41 | Jeff Layton | 28 January 2011, 20:05:43 UTC | cifs: don't pop a printk when sending on a socket is interrupted If we kill the process while it's sending on a socket then the kernel_sendmsg will return -EINTR. This is normal. No need to spam the ring buffer with this info. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 31 January 2011, 04:32:21 UTC |
| 68abaff | Jeff Layton | 28 January 2011, 20:05:42 UTC | cifs: simplify SMB header check routine ...just cleanup. There should be no behavior change. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 31 January 2011, 04:30:37 UTC |
| 2db7c58 | Jeff Layton | 28 January 2011, 12:08:28 UTC | cifs: send an NT_CANCEL request when a process is signalled Use the new send_nt_cancel function to send an NT_CANCEL when the process is delivered a fatal signal. This is a "best effort" enterprise however, so don't bother to check the return code. There's nothing we can reasonably do if it fails anyway. Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 31 January 2011, 04:24:38 UTC |
| 1be912d | Jeff Layton | 28 January 2011, 12:08:28 UTC | cifs: handle cancelled requests better Currently, when a request is cancelled via signal, we delete the mid immediately. If the request was already transmitted however, the client is still likely to receive a response. When it does, it won't recognize it however and will pop a printk. It's also a little dangerous to just delete the mid entry like this. We may end up reusing that mid. If we do then we could potentially get the response from the first request confused with the later one. Prevent the reuse of mids by marking them as cancelled and keeping them on the pending_mid_q list. If the reply comes in, we'll delete it from the list then. If it never comes, then we'll delete it at reconnect or when cifsd comes down. Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 31 January 2011, 04:23:31 UTC |
| 58b8a5b | Steve French | 31 January 2011, 04:17:03 UTC | Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6 | 31 January 2011, 04:17:03 UTC |
| ffeb414 | Jeff Layton | 29 January 2011, 12:03:02 UTC | cifs: fix two compiler warning about uninitialized vars fs/cifs/link.c: In function ‘symlink_hash’: fs/cifs/link.c:58:3: warning: ‘rc’ may be used uninitialized in this function [-Wuninitialized] fs/cifs/smbencrypt.c: In function ‘mdfour’: fs/cifs/smbencrypt.c:61:3: warning: ‘rc’ may be used uninitialized in this function [-Wuninitialized] Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 31 January 2011, 03:15:57 UTC |
| 70d1f36 | Linus Torvalds | 31 January 2011, 03:04:51 UTC | Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6 * 'for-linus' of git://git.infradead.org/ubi-2.6: Revert "UBI: use mtd->writebufsize to set minimal I/O unit size" | 31 January 2011, 03:04:51 UTC |
| 54e74b8 | Dmitry Torokhov | 29 January 2011, 07:33:29 UTC | Input: rc-keymap - return KEY_RESERVED for unknown mappings Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped scancodes, but rather return KEY_RESERVED. This fixes breakage with Ubuntu's input-kbd utility that stopped returning full keymaps for remote controls. Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Mark Lord <kernel@teksavvy.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 31 January 2011, 03:04:11 UTC |
| 1ca05b7 | Linus Torvalds | 31 January 2011, 03:02:34 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - retry failed resets when reconnecting Input: synaptics - fix reconnect logic on MT devices Input: tegra-kbc - fix keymap entry for LeftMeta key Input: tegra-kbc - fix build error | 31 January 2011, 03:02:34 UTC |
| aa5bd67 | Kacper Kornet | 28 January 2011, 23:21:04 UTC | Fix prlimit64 for suid/sgid processes Since check_prlimit_permission always fails in the case of SUID/GUID processes, such processes are not able to read or set their own limits. This commit changes this by assuming that process can always read/change its own limits. Signed-off-by: Kacper Kornet <kornet@camk.edu.pl> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 31 January 2011, 03:01:27 UTC |
| 2f215a7 | Huang Weiyi | 28 January 2011, 14:05:25 UTC | intel_scu_ipc: remove duplicated #include Remove duplicated #include('s) in drivers/platform/x86/intel_scu_ipc.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 31 January 2011, 02:59:34 UTC |
| af5eb74 | Anton Altaparmakov | 28 January 2011, 20:45:28 UTC | NTFS: Fix invalid pointer dereference in ntfs_mft_record_alloc(). In ntfs_mft_record_alloc() when mapping the new extent mft record with map_extent_mft_record() we overwrite @m with the return value and on error, we then try to use the old @m but that is no longer there as @m now contains an error code instead so we crash when dereferencing the error code as if it were a pointer. The simple fix is to use a temporary variable to store the return value thus preserving the original @m for later use. This is a backport from the commercial Tuxera-NTFS driver and is well tested... Thanks go to Julia Lawall for pointing this out (whilst I had fixed it in the commercial driver I had failed to fix it in the Linux kernel). Signed-off-by: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 31 January 2011, 02:58:11 UTC |
| 9fbf0c0 | Linus Torvalds | 31 January 2011, 02:56:27 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: More crypto cleanup (try #2) CIFS: Add strictcache mount option CIFS: Implement cifs_strict_writev (try #4) [CIFS] Replace cifs md5 hashing functions with kernel crypto APIs | 31 January 2011, 02:56:27 UTC |
| 4fda116 | Linus Torvalds | 31 January 2011, 02:55:38 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm: kmemleak: Allow kmemleak metadata allocations to fail kmemleak: remove memset by using kzalloc | 31 January 2011, 02:55:38 UTC |
| 52cea8a | Linus Torvalds | 31 January 2011, 02:54:54 UTC | Merge branch 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: Delete zero-length drivers/staging/vme/bridges/Module.symvers | 31 January 2011, 02:54:54 UTC |
| 7bfeea0 | Linus Torvalds | 31 January 2011, 02:53:12 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: HDA: Fix automute on Thinkpad L412/L512 ALSA: HDA: Fix dmesg output of HDMI supported bits ALSA: fix invalid hardware.h include in ac97c for AVR32 architecture ASoC: correct link specifications for corgi, poodle and spitz ASoC: Samsung: Fix outdated cpu_dai_name for s3c24xx i2s ASoC: Fix codec device id format used by some dai_links ALSA: azt3328 - fix broken AZF_FMT_XLATE macro ALSA: Xonar, CS43xx: Don't overrun static array ASoC: Handle low measured DC offsets for wm_hubs devices ASoC: da8xx/omap-l1xx: match codec_name with i2c ids ASoC: WM8994: fix wrong value in tristate function ASoC: WM8995: Fix incorrect use of snd_soc_update_bits() | 31 January 2011, 02:53:12 UTC |
| f9a3d1d | Linus Torvalds | 31 January 2011, 02:51:28 UTC | Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: set queue DMA alignment to sector size for ATAPI too libata: DVR-212D can't do SETXFER DVD-RW DVR-212D ahci: add HFLAG_YES_FBS and apply it to 88SE9128 pata_hpt37x: inherit prereset() method for HPT374 ahci: AHCI mode SATA patch for Intel DH89xxCC DeviceIDs pata_hpt37x: fold 'if' statement into 'switch' pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...) pata_hpt{366|37x}: use pr_warning(...) instead of printk(KERN_WARNING ...) pata_mpc52xx: inherit from ata_bmdma_port_ops | 31 January 2011, 02:51:28 UTC |
| ef9f2fa | Linus Torvalds | 31 January 2011, 02:49:26 UTC | Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegra * 'for-linus' of git://android.git.kernel.org/kernel/tegra: ARM: tegra: clock: Add forward reference to struct clk ARM: tegra: irq: Rename gic pointers to avoid conflicts arm/tegra: Fix tegra irq_data conversion | 31 January 2011, 02:49:26 UTC |
