| 8368551 | Cezary Rojewski | 19 May 2023, 20:17:09 UTC | ASoC: Intel: avs: Account for UID of ACPI device Configurations with multiple codecs attached to the platform are supported but only if each from the set is different. Add new field representing the 'Unique ID' so that codecs that share Vendor and Part IDs can be differentiated and thus enabling support for such configurations. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-6-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 22 May 2023, 10:18:24 UTC |
| 1cf036d | Cezary Rojewski | 19 May 2023, 20:17:08 UTC | ASoC: Intel: avs: Fix declaration of enum avs_channel_config Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is reserved for 'C7_1' instead. Fixes: 580a5912d1fe ("ASoC: Intel: avs: Declare module configuration types") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-5-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 22 May 2023, 10:18:23 UTC |
| 9510965 | Cezary Rojewski | 19 May 2023, 20:17:07 UTC | ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is reserved for 'C7_1' instead. Fixes: 04afbbbb1cba ("ASoC: Intel: Skylake: Update the topology interface structure") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-4-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 22 May 2023, 10:18:22 UTC |
| d849996 | Amadeusz Sławiński | 19 May 2023, 20:17:06 UTC | ASoC: Intel: avs: Access path components under lock Path and its components should be accessed under lock to prevent problems with one thread modifying them while other tries to read. Fixes: c8c960c10971 ("ASoC: Intel: avs: APL-based platforms support") Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-3-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 22 May 2023, 10:18:21 UTC |
| ff04437 | Amadeusz Sławiński | 19 May 2023, 20:17:05 UTC | ASoC: Intel: avs: Fix module lookup When changing value of kcontrol, FW module to which data should be send needs to be found. Currently it is done in improper way, fix it. Change function name to indicate that it looks only for volume module. This allows to change volume during runtime, instead of only changing init value. Fixes: be2b81b519d7 ("ASoC: Intel: avs: Parse control tuples") Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-2-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 22 May 2023, 10:18:20 UTC |
| e123036 | Ranjani Sridharan | 17 May 2023, 18:57:31 UTC | ASoC: soc-pcm: test if a BE can be prepared In the BE hw_params configuration, the existing code checks if any of the existing FEs are prepared, running, paused or suspended - and skips the configuration in those cases. This allows multiple calls of hw_params which the ALSA state machine supports. This check is not handled for the prepare stage, which can lead to the same BE being prepared multiple times. This patch adds a check similar to that of the hw_params, with the main difference being that the suspended state is allowed: the ALSA state machine allows a transition from suspended to prepared with hw_params skipped. This problem was detected on Intel IPC4/SoundWire devices, where the BE dailink .prepare stage is used to configure the SoundWire stream with a bank switch. Multiple .prepare calls lead to conflicts with the .trigger operation with IPC4 configurations. This problem was not detected earlier on Intel devices, HDaudio BE dailinks detect that the link is already prepared and skip the configuration, and for IPC3 devices there is no BE trigger. Link: https://github.com/thesofproject/sof/issues/7596 Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20230517185731.487124-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 18 May 2023, 17:31:14 UTC |
| 8b27137 | Matthias Kaehlcke | 16 May 2023, 16:46:30 UTC | ASoC: rt5682: Disable jack detection interrupt during suspend The rt5682 driver switches its regmap to cache-only when the device suspends and back to regular mode on resume. When the jack detect interrupt fires rt5682_irq() schedules the jack detect work. This can result in invalid reads from the regmap in cache-only mode if the work runs before the device has resumed: [ 56.245502] rt5682 9-001a: ASoC: error at soc_component_read_no_lock on rt5682.9-001a for register: [0x000000f0] -16 Disable the jack detection interrupt during suspend and re-enable it on resume. The driver already schedules the jack detection work on resume, so any state change during suspend is still handled. This is essentially the same as commit f7d00a9be147 ("SoC: rt5682s: Disable jack detection interrupt during suspend") for the rt5682s. Cc: stable@kernel.org Signed-off-by: Matthias Kaehlcke <mka@chromium.org Reviewed-by: Douglas Anderson <dianders@chromium.org Reviewed-by: Stephen Boyd <swboyd@chromium.org Link: https://lore.kernel.org/r/20230516164629.1.Ibf79e94b3442eecc0054d2b478779cc512d967fc@changeid Signed-off-by: Mark Brown <broonie@kernel.org | 17 May 2023, 01:48:07 UTC |
| 75e5fab | Ravulapati Vishnu Vardhan Rao | 11 May 2023, 11:25:32 UTC | ASoC: lpass: Fix for KASAN use_after_free out of bounds When we run syzkaller we get below Out of Bounds error. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: BUG: KASAN: slab-out-of-bounds in regcache_flat_read+0x10c/0x110 Read of size 4 at addr ffffff8088fbf714 by task syz-executor.4/14144 CPU: 6 PID: 14144 Comm: syz-executor.4 Tainted: G W Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT) Call trace: dump_backtrace+0x0/0x4ec show_stack+0x34/0x50 dump_stack_lvl+0xdc/0x11c print_address_description+0x30/0x2d8 kasan_report+0x178/0x1e4 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf8/0x5a0 _regmap_read+0x45c/0x86c _regmap_update_bits+0x128/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_put_dec_enum+0x1d0/0x268 snd_ctl_elem_write+0x288/0x474 By Error checking and checking valid values issue gets rectifies. Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com Link: https://lore.kernel.org/r/20230511112532.16106-1-quic_visr@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org | 17 May 2023, 01:48:06 UTC |
| 9be0b3a | Mark Brown | 15 May 2023, 15:13:09 UTC | ASoC: SOF: Intel: hda-mlink: fixes and extensions Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: With additional testing with multiple links and multiple DAI types, we found a couple of mistakes with refcounts, base address, missing initialization. A new helper was also added due to a change in the SoundWire programming sequences, with the host driver in charge of setting up the DMA channel mapping instead of the firmware. | 15 May 2023, 15:13:09 UTC |
| 1c0d023 | Ranjani Sridharan | 15 May 2023, 08:52:00 UTC | ASoC: SOF: topology: Fix tuples array allocation The memory allocated for the tuples array assumes that there's 1 instance of all tokens already. So for those tokens that have multiple instances in topology, we need to exclude the initial instance that has already been accounted for. Fixes: 4fdef47a44d6 ("ASoC: SOF: ipc4-topology: Add new tokens for input/output pin format count") Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230515085200.17094-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 11:10:18 UTC |
| be3c215 | Ranjani Sridharan | 15 May 2023, 10:44:03 UTC | ASoC: SOF: Separate the tokens for input and output pin index Using the same token ID for both input and output format pin index results in collisions and incorrect pin index getting parsed from topology. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230515104403.32207-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 11:10:17 UTC |
| aa70f36 | Mark Brown | 15 May 2023, 11:08:26 UTC | ASoC: SOF: Various runtime pm fixes, improvements Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: Three patch to correct error path PM runtime handling in few places. Regards, Peter --- Pierre-Louis Bossart (3): ASoC: SOF: debug: conditionally bump runtime_pm counter on exceptions ASoC: SOF: pcm: fix pm_runtime imbalance in error handling ASoC: SOF: sof-client-probes: fix pm_runtime imbalance in error handling sound/soc/sof/debug.c | 4 ++-- sound/soc/sof/pcm.c | 11 ++++++----- sound/soc/sof/sof-client-probes.c | 14 ++++++++------ 3 files changed, 16 insertions(+), 13 deletions(-) -- 2.40.1 | 15 May 2023, 11:08:26 UTC |
| dc60b67 | Lucas Tanure | 12 May 2023, 15:45:03 UTC | MAINTAINERS: Remove self from Cirrus Codec drivers I'm leaving Cirrus Logic, and will no longer have access to hardware and documentation necessary to be effective in a maintainership role. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com Link: https://lore.kernel.org/r/20230512154503.741718-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:35:30 UTC |
| 17082e0 | Simon Trimmer | 12 May 2023, 14:42:37 UTC | ASoC: cs35l56: Prevent unbalanced pm_runtime in dsp_work() on SoundWire Flush the SoundWire interrupt handler work instead of cancelling it. When a SoundWire interrupt is triggered the pm_runtime is held until the work has completed. It's therefore unsafe to cancel the work, it must be flushed. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com Link: https://lore.kernel.org/r/20230512144237.739000-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:35:12 UTC |
| 41c5305 | Ranjani Sridharan | 12 May 2023, 11:46:30 UTC | ASoC: SOF: topology: Fix logic for copying tuples Topology could have more instances of the tokens being searched for than the number of sets that need to be copied. Stop copying token after the limit of number of token instances has been reached. This worked before only by chance as we had allocated more size for the tuples array than the number of actual tokens being parsed. Fixes: 7006d20e5e9d ("ASoC: SOF: Introduce IPC3 ops") Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512114630.24439-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:21:15 UTC |
| 171b53b | Kai Vehmanen | 12 May 2023, 10:46:38 UTC | ASoC: SOF: pm: save io region state in case of errors in resume If there are failures in DSP runtime resume, the device state will not reach active and this makes it impossible e.g. to retrieve a possible DSP panic dump via "exception" debugfs node. If CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y is set, the data in cache is stale. If debugfs cache is not used, the region simply cannot be read. To allow debugging these scenarios, update the debugfs cache contents in resume error handler. User-space can then later retrieve DSP panic and other state via debugfs (requires SOF debugfs cache to be enabled in build). Reported-by: Curtis Malainey <cujomalainey@chromium.org Link: https://github.com/thesofproject/linux/issues/4274 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Curtis Malainey <cujomalainey@chromium.org Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512104638.21376-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:21:14 UTC |
| 647b5f5 | Krzysztof Kozlowski | 13 May 2023, 09:02:28 UTC | ASoC: MAINTAINERS: drop Krzysztof Kozlowski from Samsung audio Remove Krzysztof Kozlowski from maintainer of Samsung SoC Audio drivers and change the status to maintenance (no one is reality being paid for looking at this). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com Link: https://lore.kernel.org/r/20230513090228.4340-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:21:13 UTC |
| a93d2af | Douglas Anderson | 11 May 2023, 16:25:12 UTC | ASoC: mediatek: mt8186: Fix use-after-free in driver remove path When devm runs function in the "remove" path for a device it runs them in the reverse order. That means that if you have parts of your driver that aren't using devm or are using "roll your own" devm w/ devm_add_action_or_reset() you need to keep that in mind. The mt8186 audio driver didn't quite get this right. Specifically, in mt8186_init_clock() it called mt8186_audsys_clk_register() and then went on to call a bunch of other devm function. The caller of mt8186_init_clock() used devm_add_action_or_reset() to call mt8186_deinit_clock() but, because of the intervening devm functions, the order was wrong. Specifically at probe time, the order was: 1. mt8186_audsys_clk_register() 2. afe_priv->clk = devm_kcalloc(...) 3. afe_priv->clk[i] = devm_clk_get(...) At remove time, the order (which should have been 3, 2, 1) was: 1. mt8186_audsys_clk_unregister() 3. Free all of afe_priv->clk[i] 2. Free afe_priv->clk The above seemed to be causing a use-after-free. Luckily, it's easy to fix this by simply using devm more correctly. Let's move the devm_add_action_or_reset() to the right place. In addition to fixing the use-after-free, code inspection shows that this fixes a leak (missing call to mt8186_audsys_clk_unregister()) that would have happened if any of the syscon_regmap_lookup_by_phandle() calls in mt8186_init_clock() had failed. Fixes: 55b423d5623c ("ASoC: mediatek: mt8186: support audio clock control in platform driver") Signed-off-by: Douglas Anderson <dianders@chromium.org Link: https://lore.kernel.org/r/20230511092437.1.I31cceffc8c45bb1af16eb613e197b3df92cdc19e@changeid Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:21:13 UTC |
| 4708449 | Peter Ujfalusi | 12 May 2023, 11:03:17 UTC | ASoC: SOF: ipc3-topology: Make sure that only one cmd is sent in dai_config The commands in sof_ipc_dai_config.flags are encoded as bits: 1 (bit0) - hw_params 2 (bit1) - hw_free 4 (bit2) - pause These are commands, they cannot be combined as one would assume, for example 3 (bit0 | bit1) is invalid. This can happen right at the second start of a stream as at the end of the first stream we set the hw_free command (bit1) and on the second start we would OR on top of it the hw_params (bit0). Fixes: b66bfc3a9810 ("ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20230512110317.5180-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:21:12 UTC |
| bc42427 | Pierre-Louis Bossart | 12 May 2023, 10:33:15 UTC | ASoC: SOF: sof-client-probes: fix pm_runtime imbalance in error handling When an error occurs, we need to make sure the device can pm_runtime suspend instead of keeping it active. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512103315.8921-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:59 UTC |
| da0fe8f | Pierre-Louis Bossart | 12 May 2023, 10:33:14 UTC | ASoC: SOF: pcm: fix pm_runtime imbalance in error handling When an error occurs, we need to make sure the device can pm_runtime suspend instead of keeping it active. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512103315.8921-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:58 UTC |
| 3de9758 | Pierre-Louis Bossart | 12 May 2023, 10:33:13 UTC | ASoC: SOF: debug: conditionally bump runtime_pm counter on exceptions When a firmware IPC error happens during a pm_runtime suspend, we ignore the error and suspend anyways. However, the code unconditionally increases the runtime_pm counter. This results in a confusing configuration where the code will suspend, resume but never suspend again due to the use of pm_runtime_get_noresume(). The intent of the counter increase was to prevent entry in D3, but if that transition to D3 is already started it cannot be stopped. In addition, there's no point in that case in trying to prevent anything, the firmware error is handled and the next resume will re-initialize the firmware completely. This patch changes the logic to prevent suspend when the device is pm_runtime active and has a use_count > 0. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512103315.8921-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:57 UTC |
| ccc2f0c | Pierre-Louis Bossart | 12 May 2023, 17:46:11 UTC | ASoC: SOF: Intel: hda-mlink: add helper to program SoundWire PCMSyCM registers These registers enable the HDaudio DMA hardware to split/merge data from different PDIs, possibly on different links. This capability exists for all types of HDaudio extended links, but for now is only required for SoundWire. In the SSP/DMIC case, the IP is programmed by the DSP firmware. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Link: https://lore.kernel.org/r/20230512174611.84372-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:14 UTC |
| 9643456 | Pierre-Louis Bossart | 12 May 2023, 17:46:10 UTC | ASoC: SOF: Intel: hda-mlink: initialize instance_offset member We defined the values but never initialized it for SoundWire/SSP, fix this miss. A Fixes: tag is not provided as instance_offset was not used so far, so nothing was really broken. This patch is only required for the SoundWire support in the following patch. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Link: https://lore.kernel.org/r/20230512174611.84372-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:13 UTC |
| 7dfd1cc | Pierre-Louis Bossart | 12 May 2023, 17:46:09 UTC | ASoC: SOF: Intel: hda-mlink: use 'ml_addr' parameter consistently We mix the use of hlink->ml_addr and the 'ml_addr' parameter. It's the same thing, let's align on using the parameter. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Link: https://lore.kernel.org/r/20230512174611.84372-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:12 UTC |
| af8c32b | Pierre-Louis Bossart | 12 May 2023, 17:46:08 UTC | ASoC: SOF: Intel: hda-mlink: fix base_ptr computation The base_ptr value needs to be derived from the remap_addr pointer, not the ml_addr. This base_ptr was used only in debug logs that were so far not contributed upstream so the issue was not detected. It needs to be fixed for SoundWire support on LunarLake. Fixes: 17c9b6ec35c0 ("ASoC: SOF: Intel: hda-mlink: add structures to parse ALT links") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Link: https://lore.kernel.org/r/20230512174611.84372-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:11 UTC |
| dcb88fc | Pierre-Louis Bossart | 12 May 2023, 17:46:07 UTC | ASoC: SOF: Intel: hda-mlink: add helper to get SoundWire hlink Same functionality as for DMIC/SSP with different ID. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20230512174611.84372-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:10 UTC |
| 7430dea | Pierre-Louis Bossart | 12 May 2023, 17:46:06 UTC | ASoC: SOF: Intel: hda-mlink: fix sublink refcounting In hindsight it was a very bad idea to use the same refcount for Extended and 'legacy' HDaudio multi-links. The existing solution only powers-up the first sublink, which causes SoundWire and SSP tests to fail when more than one DAI is used concurrently. Solving this problem requires per-sublink refcounting, as suggested in this patch. The existing refcounting remains for 'legacy' HdAudio links, mainly to avoid changing the obscure programming sequence in snd_hdac_ext_bus_link_put(). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20230512174611.84372-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:09 UTC |
| f63550e | Paweł Anikiel | 08 May 2023, 11:30:37 UTC | ASoC: ssm2602: Add workaround for playback distortions Apply a workaround for what appears to be a hardware quirk. The problem seems to happen when enabling "whole chip power" (bit D7 register R6) for the very first time after the chip receives power. If either "output" (D4) or "DAC" (D3) aren't powered on at that time, playback becomes very distorted later on. This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10: https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229 I suspect this happens only when using an external MCLK signal (which is the case for both of these boards). Here are some experiments run on a Google Chameleon v3. These were run in userspace using a wrapper around the i2cset utility: ssmset() { i2cset -y 0 0x1a $(($1*2)) $2 } For each of the following sequences, we apply power to the ssm2603 chip, set the configuration registers R0-R5 and R7-R8, run the selected sequence, and check for distortions on playback. ssmset 0x09 0x01 # core ssmset 0x06 0x07 # chip, out, dac OK ssmset 0x09 0x01 # core ssmset 0x06 0x87 # out, dac ssmset 0x06 0x07 # chip OK (disable MCLK) ssmset 0x09 0x01 # core ssmset 0x06 0x1f # chip ssmset 0x06 0x07 # out, dac (enable MCLK) OK ssmset 0x09 0x01 # core ssmset 0x06 0x1f # chip ssmset 0x06 0x07 # out, dac NOT OK ssmset 0x06 0x1f # chip ssmset 0x09 0x01 # core ssmset 0x06 0x07 # out, dac NOT OK ssmset 0x09 0x01 # core ssmset 0x06 0x0f # chip, out ssmset 0x06 0x07 # dac NOT OK ssmset 0x09 0x01 # core ssmset 0x06 0x17 # chip, dac ssmset 0x06 0x07 # out NOT OK For each of the following sequences, we apply power to the ssm2603 chip, run the selected sequence, issue a reset with R15, configure R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check for distortions. ssmset 0x09 0x01 # core ssmset 0x06 0x07 # chip, out, dac OK (disable MCLK) ssmset 0x09 0x01 # core ssmset 0x06 0x07 # chip, out, dac (enable MCLK after reset) NOT OK ssmset 0x09 0x01 # core ssmset 0x06 0x17 # chip, dac NOT OK ssmset 0x09 0x01 # core ssmset 0x06 0x0f # chip, out NOT OK ssmset 0x06 0x07 # chip, out, dac NOT OK Signed-off-by: Paweł Anikiel <pan@semihalf.com Link: https://lore.kernel.org/r/20230508113037.137627-8-pan@semihalf.com Signed-off-by: Mark Brown <broonie@kernel.org | 12 May 2023, 01:26:47 UTC |
| efb2bfd | Martin Povišer | 09 May 2023, 15:34:12 UTC | ASoC: dt-bindings: Adjust #sound-dai-cells on TI's single-DAI codecs A bunch of TI's codecs have binding schemas which force #sound-dai-cells to one despite those codecs only having a single DAI. Allow for bindings with zero DAI cells and deprecate the former non-zero value. Signed-off-by: Martin Povišer <povik+lin@cutebit.org Link: https://lore.kernel.org/r/20230509153412.62847-1-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org | 11 May 2023, 01:17:59 UTC |
| ad721bc | Aidan MacDonald | 09 May 2023, 12:51:34 UTC | ASoC: jz4740-i2s: Make I2S divider calculations more robust When the CPU supplies bit/frame clocks, the system clock (clk_i2s) is divided to produce the bit clock. This is a simple 1/N divider with a fairly limited range, so for a given system clock frequency only a few sample rates can be produced. Usually a wider range of sample rates is supported by varying the system clock frequency. The old calculation method was not very robust and could easily produce the wrong clock rate, especially with non-standard rates. For example, if the system clock is 1.99x the target bit clock rate, the divider would be calculated as 1 instead of the more accurate 2. Instead, use a more accurate method that considers two adjacent divider settings and selects the one that produces the least error versus the requested rate. If the error is 5% or higher then the rate setting is rejected to prevent garbled audio. Skip divider calculation when the codec is supplying both the bit and frame clock; in that case, the divider outputs are unused and we don't want to constrain the sample rate. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com Link: https://lore.kernel.org/r/20230509125134.208129-1-aidanmacdonald.0x0@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org | 11 May 2023, 01:17:58 UTC |
| 051d71e | V sujith kumar Reddy | 08 May 2023, 07:05:08 UTC | ASoC: SOF: amd: Fix NULL pointer crash in acp_sof_ipc_msg_data function Check substream and runtime variables before assigning. Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com Link: https://lore.kernel.org/r/20230508070510.6100-1-Vsujithkumar.Reddy@amd.com Signed-off-by: Mark Brown <broonie@kernel.org | 09 May 2023, 05:43:33 UTC |
| 17955ab | Shengjiu Wang | 08 May 2023, 10:16:36 UTC | ASoC: fsl_micfil: Fix error handler with pm_runtime_enable There is error message when defer probe happens: fsl-micfil-dai 30ca0000.micfil: Unbalanced pm_runtime_enable! Fix the error handler with pm_runtime_enable and add fsl_micfil_remove() for pm_runtime_disable. Fixes: 47a70e6fc9a8 ("ASoC: Add MICFIL SoC Digital Audio Interface driver.") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com Link: https://lore.kernel.org/r/1683540996-6136-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org | 08 May 2023, 13:35:10 UTC |
| ab6ecfb | Maxim Kochetkov | 05 May 2023, 06:28:20 UTC | ASoC: dwc: limit the number of overrun messages On slow CPU (FPGA/QEMU emulated) printing overrun messages from interrupt handler to uart console may leads to more overrun errors. So use dev_err_ratelimited to limit the number of error messages. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru Link: https://lore.kernel.org/r/20230505062820.21840-1-fido_max@inbox.ru Signed-off-by: Mark Brown <broonie@kernel.org | 08 May 2023, 00:07:43 UTC |
| 7b9891a | Jeremy Soller | 05 May 2023, 16:14:58 UTC | ASoC: amd: yc: Add DMI entry to support System76 Pangolin 12 Add pang12 quirk to enable the internal microphone. Signed-off-by: Jeremy Soller <jeremy@system76.com Signed-off-by: Tim Crawford <tcrawford@system76.com Link: https://lore.kernel.org/r/20230505161458.19676-1-tcrawford@system76.com Signed-off-by: Mark Brown <broonie@kernel.org | 08 May 2023, 00:07:42 UTC |
| ac9a786 | Linus Torvalds | 07 May 2023, 20:34:35 UTC | Linux 6.4-rc1 | 07 May 2023, 20:34:35 UTC |
| f085df1 | Linus Torvalds | 07 May 2023, 18:32:18 UTC | Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "Third version of perf tool updates, with the build problems with with using a 'vmlinux.h' generated from the main build fixed, and the bpf skeleton build disabled by default. Build: - Require libtraceevent to build, one can disable it using NO_LIBTRACEEVENT=1. It is required for tools like 'perf sched', 'perf kvm', 'perf trace', etc. libtraceevent is available in most distros so installing 'libtraceevent-devel' should be a one-time event to continue building perf as usual. Using NO_LIBTRACEEVENT=1 produces tooling that is functional and sufficient for lots of users not interested in those libtraceevent dependent features. - Allow Python support in 'perf script' when libtraceevent isn't linked, as not all features requires it, for instance Intel PT does not use tracepoints. - Error if the python interpreter needed for jevents to work isn't available and NO_JEVENTS=1 isn't set, preventing a build without support for JSON vendor events, which is a rare but possible condition. The two check error messages: $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.) $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.) - Make libbpf 1.0 the minimum required when building with out of tree, distro provided libbpf. - Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++ demangler, add 'perf test' entry for it. - Make binutils libraries opt in, as distros disable building with it due to licensing, they were used for C++ demangling, for instance. - Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or equivalent) isn't installed, we'll just have a build warning: Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev - Add a feature test for scandirat(), that is not implemented so far in musl and uclibc, disabling features that need it, such as scanning for tracepoints in /sys/kernel/tracing/events. perf BPF filters: - New feature where BPF can be used to filter samples, for instance: $ sudo ./perf record -e cycles --filter 'period > 1000' true $ sudo ./perf script perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms]) perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms]) perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms]) true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms]) true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) - In addition to 'period' (PERF_SAMPLE_PERIOD), the other PERF_SAMPLE_ can be used for filtering, and also some other sample accessible values, from tools/perf/Documentation/perf-record.txt: Essentially the BPF filter expression is: <term> <operator> <value> (("," | "||") <term> <operator> <value>)* The <term> can be one of: ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr, code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat, p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock, mem_dtlb, mem_blk, mem_hops The <operator> can be one of: ==, !=, >, >=, <, <=, & The <value> can be one of: <number> (for any term) na, load, store, pfetch, exec (for mem_op) l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl) na, none, hit, miss, hitm, fwd, peer (for mem_snoop) remote (for mem_remote) na, locked (for mem_locked) na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb) na, by_data, by_addr (for mem_blk) hops0, hops1, hops2, hops3 (for mem_hops) perf lock contention: - Show lock type with address. - Track and show mmap_lock, siglock and per-cpu rq_lock with address. This is done for mmap_lock by following the current->mm pointer: $ sudo ./perf lock con -abl -- sleep 10 contended total wait max wait avg wait address symbol ... 16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640 17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0 3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock 3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58 1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70 9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock 14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0 3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock 16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560 11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock 1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8 1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock 581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058 5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070 112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120 381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock 255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80 - Update default map size to 16384. - Allocate single letter option -M for --map-nr-entries, as it is proving being frequently used. - Fix struct rq lock access for older kernels with BPF's CO-RE (Compile once, run everywhere). - Fix problems found with MSAn. perf report/top: - Add inline information when using --call-graph=fp or lbr, as was already done to the --call-graph=dwarf callchain mode. - Improve the 'srcfile' sort key performance by really using an optimization introduced in 6.2 for the 'srcline' sort key that avoids calling addr2line for comparision with each sample. perf sched: - Make 'perf sched latency/map/replay' to use "sched:sched_waking" instead of "sched:sched_waking", consistent with 'perf record' since d566a9c2d482 ("perf sched: Prefer sched_waking event when it exists"). perf ftrace: - Make system wide the default target for latency subcommand, run the following command then generate some network traffic and press control+C: # perf ftrace latency -T __kfree_skb ^C DURATION | COUNT | GRAPH | 0 - 1 us | 27 | ############# | 1 - 2 us | 22 | ########### | 2 - 4 us | 8 | #### | 4 - 8 us | 5 | ## | 8 - 16 us | 24 | ############ | 16 - 32 us | 2 | # | 32 - 64 us | 1 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | # perf top: - Add --branch-history (LBR: Last Branch Record) option, just like already available for 'perf record'. - Fix segfault in thread__comm_len() where thread->comm was being used outside thread->comm_lock. perf annotate: - Allow configuring objdump and addr2line in ~/.perfconfig., so that you can use alternative binaries, such as llvm's. perf kvm: - Add TUI mode for 'perf kvm stat report'. Reference counting: - Add reference count checking infrastructure to check for use after free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs, more to come. To build with it use -DREFCNT_CHECKING=1 in the make command line to build tools/perf. Documented at: https://perf.wiki.kernel.org/index.php/Reference_Count_Checking - The above caught, for instance, fix, present in this series: - Fix maps use after put in 'perf test "Share thread maps"': 'maps' is copied from leader, but the leader is put on line 79 and then 'maps' is used to read the reference count below - so a use after put, with the put of maps happening within thread__put. Fixed by reversing the order of puts so that the leader is put last. - Also several fixes were made to places where reference counts were not being held. - Make this one of the tests in 'make -C tools/perf build-test' to regularly build test it and to make sure no direct access to the reference counted structs are made, doing that via accessors to check the validity of the struct pointer. ARM64: - Fix 'perf report' segfault when filtering coresight traces by sparse lists of CPUs. - Add support for 'simd' as a sort field for 'perf report', to show ARM's NEON SIMD's predicate flags: "partial" and "empty". arm64 vendor events: - Add N1 metrics. Intel vendor events: - Add graniterapids, grandridge and sierraforrest events. - Refresh events for: alderlake, aldernaken, broadwell, broadwellde, broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex, jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids, silvermont, skylake, tigerlake and westmereep-dp - Refresh metrics for alderlake-n, broadwell, broadwellde, broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and skylakex. perf stat: - Implement --topdown using JSON metrics. - Add TopdownL1 JSON metric as a default if present, but disable it for now for some Intel hybrid architectures, a series of patches addressing this is being reviewed and will be submitted for v6.5. - Use metrics for --smi-cost. - Update topdown documentation. Vendor events (JSON) infrastructure: - Add support for computing and printing metric threshold values. For instance, here is one found in thesapphirerapids json file: { "BriefDescription": "Percentage of cycles spent in System Management Interrupts.", "MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)", "MetricGroup": "smi", "MetricName": "smi_cycles", "MetricThreshold": "smi_cycles > 0.1", "ScaleUnit": "100%" }, - Test parsing metric thresholds with the fake PMU in 'perf test pmu-events'. - Support for printing metric thresholds in 'perf list'. - Add --metric-no-threshold option to 'perf stat'. - Add rand (reverse and) and has_pmem (optane memory) support to metrics. - Sort list of input files to avoid depending on the order from readdir() helping in obtaining reproducible builds. S/390: - Add common metrics: - CPI (cycles per instruction), prbstate (ratio of instructions executed in problem state compared to total number of instructions), l1mp (Level one instruction and data cache misses per 100 instructions). - Add cache metrics for z13, z14, z15 and z16. - Add metric for TLB and cache. ARM: - Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE (Memory Tagging Extension) and MOPS (Memory Operations) load/store. Intel PT hardware tracing: - Add event type names UINTR (User interrupt delivered) and UIRET (Exiting from user interrupt routine), documented in table 32-50 "CFE Packet Type and Vector Fields Details" in the Intel Processor Trace chapter of The Intel SDM Volume 3 version 078. - Add support for new branch instructions ERETS and ERETU. - Fix CYC timestamps after standalone CBR ARM CoreSight hardware tracing: - Allow user to override timestamp and contextid settings. - Fix segfault in dso lookup. - Fix timeless decode mode detection. - Add separate decode paths for timeless and per-thread modes. auxtrace: - Fix address filter entire kernel size. Miscellaneous: - Fix use-after-free and unaligned bugs in the PLT handling routines. - Use zfree() to reduce chances of use after free. - Add missing 0x prefix for addresses printed in hexadecimal in 'perf probe'. - Suppress massive unsupported target platform errors in the unwind code. - Fix return incorrect build_id size in elf_read_build_id(). - Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 . - Add missing new parameter in kfree_skb tracepoint to the python scripts using it. - Add 'perf bench syscall fork' benchmark. - Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in 'perf mem'. - Fix wrong size expectation for perf test 'Setup struct perf_event_attr' caused by the patch adding perf_event_attr::config3. - Fix some spelling mistakes" * tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits) Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" Revert "perf build: Warn for BPF skeletons if endian mismatches" perf metrics: Fix SEGV with --for-each-cgroup perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE perf stat: Separate bperf from bpf_profiler perf test record+probe_libc_inet_pton: Fix call chain match on x86_64 perf test record+probe_libc_inet_pton: Fix call chain match on s390 perf tracepoint: Fix memory leak in is_valid_tracepoint() perf cs-etm: Add fix for coresight trace for any range of CPUs perf build: Fix unescaped # in perf build-test perf unwind: Suppress massive unsupported target platform errors perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it perf script: Print raw ip instead of binary offset for callchain perf symbols: Fix return incorrect build_id size in elf_read_build_id() perf list: Modify the warning message about scandirat(3) perf list: Fix memory leaks in print_tracepoint_events() perf lock contention: Rework offset calculation with BPF CO-RE perf lock contention: Fix struct rq lock access perf stat: Disable TopdownL1 on hybrid perf stat: Avoid SEGV on counter->name ... | 07 May 2023, 18:32:18 UTC |
| 17784de | Linus Torvalds | 07 May 2023, 18:04:26 UTC | Merge tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects fix from Thomas Gleixner: "A single fix for debugobjects: The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism, so that debugobject OOMs now in certain situations. The reason is that the functions which got updated no longer invoke debug_objecs_init(), which is now the only place to care about refilling the tracking object pool. Restore the original behaviour by adding explicit refill opportunities to those places" * tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobject: Ensure pool refill (again) | 07 May 2023, 18:04:26 UTC |
| 6f69c98 | Linus Torvalds | 07 May 2023, 17:57:14 UTC | Merge tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - A long-standing bug in crypto_engine - A buggy but harmless check in the sun8i-ss driver - A regression in the CRYPTO_USER interface * tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Fix CRYPTO_USER checks for report function crypto: engine - fix crypto_queue backlog handling crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs() | 07 May 2023, 17:57:14 UTC |
| 63342b1 | Linus Torvalds | 07 May 2023, 17:46:21 UTC | Merge tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "smb3 client fixes, mostly DFS or reconnect related: - Two DFS connection sharing fixes - DFS refresh fix - Reconnect fix - Two potential use after free fixes - Also print prefix patch in mount debug msg - Two small cleanup fixes" * tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Remove unneeded semicolon cifs: fix sharing of DFS connections cifs: avoid potential races when handling multiple dfs tcons cifs: protect access of TCP_Server_Info::{origin,leaf}_fullpath cifs: fix potential race when tree connecting ipc cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname cifs: print smb3_fs_context::source when mounting cifs: protect session status check in smb2_reconnect() SMB3.1.1: correct definition for app_instance_id create contexts | 07 May 2023, 17:46:21 UTC |
| d6b8a8c | Linus Torvalds | 07 May 2023, 17:31:45 UTC | Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A couple more patches that would be good to get into -rc1: - Revert an i.MX patch that's causing video failures because division math goes sideways - Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit variable instead of the usual u64 type - Fix a Kconfig bug in the StarFive JH7110 clk config that selects a reset controller when it can't be selected" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case clk: sp7021: Adjust width of _m in HWM_FIELD_PREP() Revert "clk: imx: composite-8m: Add support to determine_rate" | 07 May 2023, 17:31:45 UTC |
| 1c1094e | Linus Torvalds | 07 May 2023, 17:17:33 UTC | Merge tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mailbox api: allow direct registration to a channel and convert omap and pcc to use mbox_bind_client - omap and hi6220 : use of_property_read_bool - test: fix double-free and use spinlock header - rockchip and bcm-pdc: drop of_match_ptr - mpfs: change config symbol - mediatek gce: support MT6795 - qcom apcs: consolidate of_device_id and support IPQ9574 * tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC mailbox: qcom-apcs-ipc: do not grow the of_device_id dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795 mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE mailbox: bcm-pdc: drop of_match_ptr for ID table mailbox: rockchip: drop of_match_ptr for ID table mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write() mailbox: mailbox-test: Explicitly include header for spinlock support mailbox: Use of_property_read_bool() for boolean properties mailbox: pcc: Use mbox_bind_client mailbox: omap: Use mbox_bind_client mailbox: Allow direct registration to a channel | 07 May 2023, 17:17:33 UTC |
| 03e5cb7 | Linus Torvalds | 07 May 2023, 17:00:09 UTC | Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux Pull more io_uring updates from Jens Axboe: "Nothing major in here, just two different parts: - A small series from Breno that enables passing the full SQE down for ->uring_cmd(). This is a prerequisite for enabling full network socket operations. Queued up a bit late because of some stylistic concerns that got resolved, would be nice to have this in 6.4-rc1 so the dependent work will be easier to handle for 6.5. - Fix for the huge page coalescing, which was a regression introduced in the 6.3 kernel release (Tobias)" * tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux: io_uring: Remove unnecessary BUILD_BUG_ON io_uring: Pass whole sqe to commands io_uring: Create a helper to return the SQE size io_uring/rsrc: check for nonconsecutive pages | 07 May 2023, 17:00:09 UTC |
| 9a2d517 | Arnaldo Carvalho de Melo | 06 May 2023, 21:07:37 UTC | Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" This reverts commit a980755beb5aca9002e1c95ba519b83a44242b5b. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 06 May 2023, 21:07:37 UTC |
| c3e6df9 | Arnaldo Carvalho de Melo | 06 May 2023, 21:06:43 UTC | Revert "perf build: Warn for BPF skeletons if endian mismatches" This reverts commit 51924ae69eea5bc90b5da525fbcf4bbd5f8551b3. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 06 May 2023, 21:06:43 UTC |
| fc4354c | Linus Torvalds | 06 May 2023, 18:43:08 UTC | Merge tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull dmapool updates - again - from Andrew Morton: "Reinstate the dmapool changes which were accidentally removed by a mishap on the last commit in the previous attempt at the series" Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup"). [ The whole old series: def8574308ed..2d55c16c0c54 results in an empty diff because that last commit ended up being just a revert of all that came everything before it. - Linus ] * tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: dmapool: link blocks across pages dmapool: don't memset on free twice dmapool: simplify freeing dmapool: consolidate page initialization dmapool: rearrange page alloc failure handling dmapool: move debug code to own functions dmapool: speedup DMAPOOL_DEBUG with init_on_alloc dmapool: cleanup integer types dmapool: use sysfs_emit() instead of scnprintf() dmapool: remove checks for dev == NULL | 06 May 2023, 18:43:08 UTC |
| 706ce3c | Linus Torvalds | 06 May 2023, 18:25:03 UTC | Merge tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "Five hotfixes. Three are cc:stable, two pertain to merge window changes" * tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: afs: fix the afs_dir_get_folio return value nilfs2: do not write dirty data after degenerating to read-only mm: do not reclaim private data from pinned page nilfs2: fix infinite loop in nilfs_mdt_get_block() mm/mmap/vma_merge: always check invariants | 06 May 2023, 18:25:03 UTC |
| da9619a | Keith Busch | 26 January 2023, 21:51:24 UTC | dmapool: link blocks across pages The allocated dmapool pages are never freed for the lifetime of the pool. There is no need for the two level list+stack lookup for finding a free block since nothing is ever removed from the list. Just use a simple stack, reducing time complexity to constant. The implementation inserts the stack linking elements and the dma handle of the block within itself when freed. This means the smallest possible dmapool block is increased to at most 16 bytes to accommodate these fields, but there are no exisiting users requesting a dma pool smaller than that anyway. Removing the list has a significant change in performance. Using the kernel's micro-benchmarking self test: Before: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:57282 dmapool test: size:64 blocks:8192 time:172562 dmapool test: size:256 blocks:8192 time:789247 dmapool test: size:1024 blocks:2048 time:371823 dmapool test: size:4096 blocks:1024 time:362237 After: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:24997 dmapool test: size:64 blocks:8192 time:26584 dmapool test: size:256 blocks:8192 time:33542 dmapool test: size:1024 blocks:2048 time:9022 dmapool test: size:4096 blocks:1024 time:6045 The module test allocates quite a few blocks that may not accurately represent how these pools are used in real life. For a more marco level benchmark, running fio high-depth + high-batched on nvme, this patch shows submission and completion latency reduced by ~100usec each, 1% IOPs improvement, and perf record's time spent in dma_pool_alloc/free were reduced by half. [kbusch@kernel.org: push new blocks in ascending order] Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:38 UTC |
| 8ecc369 | Keith Busch | 26 January 2023, 21:51:23 UTC | dmapool: don't memset on free twice If debug is enabled, dmapool will poison the range, so no need to clear it to 0 immediately before writing over it. Link: https://lkml.kernel.org/r/20230126215125.4069751-11-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:38 UTC |
| cc66995 | Keith Busch | 26 January 2023, 21:51:22 UTC | dmapool: simplify freeing The actions for busy and not busy are mostly the same, so combine these and remove the unnecessary function. Also, the pool is about to be freed so there's no need to poison the page data since we only check for poison on alloc, which can't be done on a freed pool. Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:37 UTC |
| f0bccea | Keith Busch | 26 January 2023, 21:51:21 UTC | dmapool: consolidate page initialization Various fields of the dma pool are set in different places. Move it all to one function. Link: https://lkml.kernel.org/r/20230126215125.4069751-9-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:37 UTC |
| 5407df1 | Keith Busch | 26 January 2023, 21:51:20 UTC | dmapool: rearrange page alloc failure handling Handle the error in a condition so the good path can be in the normal flow. Link: https://lkml.kernel.org/r/20230126215125.4069751-8-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:37 UTC |
| d93e08b | Keith Busch | 26 January 2023, 21:51:19 UTC | dmapool: move debug code to own functions Clean up the normal path by moving the debug code outside it. Link: https://lkml.kernel.org/r/20230126215125.4069751-7-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:37 UTC |
| 290911c | Tony Battersby | 26 January 2023, 21:51:18 UTC | dmapool: speedup DMAPOOL_DEBUG with init_on_alloc Avoid double-memset of the same allocated memory in dma_pool_alloc() when both DMAPOOL_DEBUG is enabled and init_on_alloc=1. Link: https://lkml.kernel.org/r/20230126215125.4069751-6-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:36 UTC |
| 7902335 | Tony Battersby | 26 January 2023, 21:51:17 UTC | dmapool: cleanup integer types To represent the size of a single allocation, dmapool currently uses 'unsigned int' in some places and 'size_t' in other places. Standardize on 'unsigned int' to reduce overhead, but use 'size_t' when counting all the blocks in the entire pool. Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:36 UTC |
| 08cc96c | Tony Battersby | 26 January 2023, 21:51:16 UTC | dmapool: use sysfs_emit() instead of scnprintf() Use sysfs_emit instead of scnprintf, snprintf or sprintf. Link: https://lkml.kernel.org/r/20230126215125.4069751-4-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:36 UTC |
| 67a540c | Tony Battersby | 26 January 2023, 21:51:15 UTC | dmapool: remove checks for dev == NULL dmapool originally tried to support pools without a device because dma_alloc_coherent() supports allocations without a device. But nobody ended up using dma pools without a device, and trying to do so will result in an oops. So remove the checks for pool->dev == NULL since they are unneeded bloat. [kbusch@kernel.org: add check for null dev on create] Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:36 UTC |
| 994e241 | Linus Torvalds | 06 May 2023, 17:16:19 UTC | nfs: fix mis-merged __filemap_get_folio() error check Fix another case of an incorrect check for the returned 'folio' value from __filemap_get_folio(). The failure case used to return NULL, but was changed by commit 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio"). But in the meantime, commit ec108d3cc766 ("NFS: Convert readdir page array functions to use a folio") added a new user of that function. And my merge of the two did not fix this up correctly. The ext4 merge had the same issue, but that one had been caught in linux-next and got properly fixed while merging. Fixes: 0127f25b5dfc ("Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs") Cc: Anna Schumaker <anna@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 06 May 2023, 17:16:19 UTC |
| 58f5f66 | Christoph Hellwig | 03 May 2023, 15:45:26 UTC | afs: fix the afs_dir_get_folio return value Keep returning NULL on failure instead of letting an ERR_PTR escape to callers that don't expect it. Link: https://lkml.kernel.org/r/20230503154526.1223095-2-hch@lst.de Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio") Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:10:08 UTC |
| 28a65b4 | Ryusuke Konishi | 27 April 2023, 01:15:26 UTC | nilfs2: do not write dirty data after degenerating to read-only According to syzbot's report, mark_buffer_dirty() called from nilfs_segctor_do_construct() outputs a warning with some patterns after nilfs2 detects metadata corruption and degrades to read-only mode. After such read-only degeneration, page cache data may be cleared through nilfs_clear_dirty_page() which may also clear the uptodate flag for their buffer heads. However, even after the degeneration, log writes are still performed by unmount processing etc., which causes mark_buffer_dirty() to be called for buffer heads without the "uptodate" flag and causes the warning. Since any writes should not be done to a read-only file system in the first place, this fixes the warning in mark_buffer_dirty() by letting nilfs_segctor_do_construct() abort early if in read-only mode. This also changes the retry check of nilfs_segctor_write_out() to avoid unnecessary log write retries if it detects -EROFS that nilfs_segctor_do_construct() returned. Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290 Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:10:07 UTC |
| d824ec2 | Jan Kara | 28 April 2023, 12:41:40 UTC | mm: do not reclaim private data from pinned page If the page is pinned, there's no point in trying to reclaim it. Furthermore if the page is from the page cache we don't want to reclaim fs-private data from the page because the pinning process may be writing to the page at any time and reclaiming fs private info on a dirty page can upset the filesystem (see link below). Link: https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz Link: https://lkml.kernel.org/r/20230428124140.30166-1-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:10:07 UTC |
| a6a491c | Ryusuke Konishi | 30 April 2023, 19:30:46 UTC | nilfs2: fix infinite loop in nilfs_mdt_get_block() If the disk image that nilfs2 mounts is corrupted and a virtual block address obtained by block lookup for a metadata file is invalid, nilfs_bmap_lookup_at_level() may return the same internal return code as -ENOENT, meaning the block does not exist in the metadata file. This duplication of return codes confuses nilfs_mdt_get_block(), causing it to read and create a metadata block indefinitely. In particular, if this happens to the inode metadata file, ifile, semaphore i_rwsem can be left held, causing task hangs in lock_mount. Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block address translation failures with -ENOENT as metadata corruption instead of returning the error code. Link: https://lkml.kernel.org/r/20230430193046.6769-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+221d75710bde87fa0e97@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=221d75710bde87fa0e97 Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:10:07 UTC |
| 29417d2 | Lorenzo Stoakes | 30 April 2023, 20:19:17 UTC | mm/mmap/vma_merge: always check invariants We may still have inconsistent input parameters even if we choose not to merge and the vma_merge() invariant checks are useful for checking this with no production runtime cost (these are only relevant when CONFIG_DEBUG_VM is specified). Therefore, perform these checks regardless of whether we merge. This is relevant, as a recent issue (addressed in commit "mm/mempolicy: Correctly update prev when policy is equal on mbind") in the mbind logic was only picked up in the 6.2.y stable branch where these assertions are performed prior to determining mergeability. Had this remained the same in mainline this issue may have been picked up faster, so moving forward let's always check them. Link: https://lkml.kernel.org/r/df548a6ae3fa135eec3b446eb3dae8eb4227da97.1682885809.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:10:07 UTC |
| 38a55db | Matthew Wilcox | 06 May 2023, 16:04:14 UTC | filemap: Handle error return from __filemap_get_folio() Smatch reports that filemap_fault() was missed in the conversion of __filemap_get_folio() error returns from NULL to ERR_PTR. Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-by: syzbot+48011b86c8ea329af1b9@syzkaller.appspotmail.com Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 06 May 2023, 17:08:59 UTC |
| dd9e11d | Linus Torvalds | 06 May 2023, 15:37:28 UTC | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull more SCSI updates from James Bottomley: "Six late arriving patches for the merge window. Five are minor assorted fixes and updates. The IPR driver change removes SATA support, which will now allow a major cleanup in the ATA subsystem because it was the only driver still using the old attachment mechanism. The driver is only used on power systems and SATA was used to support a DVD device, which has long been moved to a different hba. IBM chose this route instead of porting ipr to the newer SATA interfaces" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Fix use after free bug in qedi_remove() scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue scsi: ipr: Remove several unused variables scsi: pm80xx: Log device registration scsi: ipr: Remove SATA support scsi: scsi_debug: Abort commands from scsi_debug_device_reset() | 06 May 2023, 15:37:28 UTC |
| a3b111b | Linus Torvalds | 06 May 2023, 15:28:58 UTC | Merge tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux Pull more block updates from Jens Axboe: - MD pull request via Song: - Improve raid5 sequential IO performance on spinning disks, which fixes a regression since v6.0 (Jan Kara) - Fix bitmap offset types, which fixes an issue introduced in this merge window (Jonathan Derrick) - Cleanup of hweight type used for cgroup writeback (Maxim) - Fix a regression with the "has_submit_bio" changes across partitions (Ming) - Cleanup of QUEUE_FLAG_ADD_RANDOM clearing. We used to set this flag on queues non blk-mq queues, and hence some drivers clear it unconditionally. Since all of these have since been converted to true blk-mq drivers, drop the useless clear as the bit is not set (Chaitanya) - Fix the flags being set in a bio for a flush for drbd (Christoph) - Cleanup and deduplication of the code handling setting block device capacity (Damien) - Fix for ublk handling IO timeouts (Ming) - Fix for a regression in blk-cgroup teardown (Tao) - NBD documentation and code fixes (Eric) - Convert blk-integrity to using device_attributes rather than a second kobject to manage lifetimes (Thomas) * tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux: ublk: add timeout handler drbd: correctly submit flush bio on barrier mailmap: add mailmap entries for Jens Axboe block: Skip destroyed blkg when restart in blkg_destroy_all() writeback: fix call of incorrect macro md: Fix bitmap offset type in sb writer md/raid5: Improve performance for sequential IO docs nbd: userspace NBD now favors github over sourceforge block nbd: use req.cookie instead of req.handle uapi nbd: add cookie alias to handle uapi nbd: improve doc links to userspace spec blk-integrity: register sysfs attributes on struct device blk-integrity: convert to struct device_attribute blk-integrity: use sysfs_emit block/drivers: remove dead clear of random flag block: sync part's ->bd_has_submit_bio with disk's block: Cleanup set_capacity()/bdev_set_nr_sectors() | 06 May 2023, 15:28:58 UTC |
| 7644c82 | Linus Torvalds | 06 May 2023, 15:15:20 UTC | Merge tag 'pipe-nonblock-2023-05-06' of git://git.kernel.dk/linux Pull nonblocking pipe io_uring support from Jens Axboe: "Here's the revised edition of the FMODE_NOWAIT support for pipes, in which we just flag it as such supporting FMODE_NOWAIT unconditionally, but clear it if we ever end up using splice/vmsplice on the pipe. The pipe read/write side is perfectly fine for nonblocking IO, however splice and vmsplice can potentially wait for IO with the pipe lock held" * tag 'pipe-nonblock-2023-05-06' of git://git.kernel.dk/linux: pipe: set FMODE_NOWAIT on pipes splice: clear FMODE_NOWAIT on file if splice/vmsplice is used | 06 May 2023, 15:15:20 UTC |
| 0021b53 | Linus Torvalds | 06 May 2023, 15:07:11 UTC | Merge tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes for rc1. The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most of it was merely a code shuffling. Another significant change here is for ALSA PCM core; it received a revert and a series of fixes for PCM auto-silencing where it caused a regression in the previous PR for rc1. Others are all small: ASoC Intel fixes, various quirks for ASoC AMD, HD-audio and USB-audio, the continued legacy emu10k1 code cleanup, and some documentation updates" * tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence() ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence() ALSA: pcm: playback silence - move silence variable updates to separate function ALSA: pcm: playback silence - remove extra code ALSA: pcm: fix playback silence - correct incremental silencing ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()" ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init` ALSA: usb-audio: Add quirk for Pioneer DDJ-800 ALSA: hda/realtek: support HP Pavilion Aero 13-be0xxx Mute LED ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet ASoC: amd: yc: Add Asus VivoBook Pro 14 OLED M6400RC to the quirks list for acp6x ASoC: codecs: wcd938x: fix accessing regmap on unattached devices ALSA: docs: Fix code block indentation in ALSA driver example ALSA: docs: Extend module parameters description ALSA: hda/realtek: Add quirk for ASUS UM3402YAR using CS35L41 ALSA: emu10k1: use more existing defines instead of open-coded numbers ASoC: amd: yc: Add ASUS M3402RA into DMI table ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6 ... | 06 May 2023, 15:07:11 UTC |
| 27e0c84 | Linus Torvalds | 06 May 2023, 15:06:09 UTC | Merge tag 'regulator-fix-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "A trivial typo fix that came in during the merge window" * tag 'regulator-fix-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: consumer.rst: fix 'regulator_enable' typo. | 06 May 2023, 15:06:09 UTC |
| 2e1e133 | Linus Torvalds | 06 May 2023, 02:16:58 UTC | Merge tag '6.4-rc-ksmbd-server-fixes-part2' of git://git.samba.org/ksmbd Pull ksmbd server fixes from Steve French: "Ten ksmbd server fixes, including some important security fixes: - Two use after free fixes - Fix RCU callback race - Deadlock fix - Three patches to prevent session setup attacks - Prevent guest users from establishing multichannel sessions - Fix null pointer dereference in query FS info - Memleak fix" * tag '6.4-rc-ksmbd-server-fixes-part2' of git://git.samba.org/ksmbd: ksmbd: call rcu_barrier() in ksmbd_server_exit() ksmbd: fix racy issue under cocurrent smb2 tree disconnect ksmbd: fix racy issue from smb2 close and logoff with multichannel ksmbd: not allow guest user on multichannel ksmbd: fix deadlock in ksmbd_find_crypto_ctx() ksmbd: block asynchronous requests when making a delay on session setup ksmbd: destroy expired sessions ksmbd: fix racy issue from session setup and logoff ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem() ksmbd: fix memleak in session setup | 06 May 2023, 02:16:58 UTC |
| ed23734 | Linus Torvalds | 06 May 2023, 02:12:01 UTC | Merge tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency" * tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() pds_core: fix mutex double unlock in error path net/sched: flower: fix error handler on replace Revert "net/sched: flower: Fix wrong handle assignment during filter change" net/sched: flower: fix filter idr initialization net: fec: correct the counting of XDP sent frames bonding: add xdp_features support net: enetc: check the index of the SFI rather than the handle sfc: Add back mailing list virtio_net: suppress cpu stall when free_unused_bufs ice: block LAN in case of VF to VF offload net: dsa: mt7530: fix network connectivity with multiple CPU ports net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 9p: Remove INET dependency netfilter: nf_tables: fix ct untracked match breakage af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). igc: read before write to SRRCTL register pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig pds_core: remove CONFIG_DEBUG_FS from makefile ionic: catch failure from devlink_alloc ... | 06 May 2023, 02:12:01 UTC |
| a5e2190 | Linus Torvalds | 06 May 2023, 02:07:17 UTC | Merge tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "Some more driver bugfixes and a DT binding conversion" * tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: dt-bindings: i2c: brcm,kona-i2c: convert to YAML i2c: gxp: fix build failure without CONFIG_I2C_SLAVE i2c: imx-lpi2c: avoid taking clk_prepare mutex in PM callbacks i2c: omap: Fix standard mode false ACK readings i2c: tegra: Fix PEC support for SMBUS block read | 06 May 2023, 02:07:17 UTC |
| c12753d | Lukas Bulwahn | 05 May 2023, 22:39:09 UTC | s390: remove the unneeded select GCC12_NO_ARRAY_BOUNDS Commit 0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") makes config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS. As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390 architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped. Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS". Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 06 May 2023, 01:56:23 UTC |
| 6c73f81 | Ian Rogers | 05 May 2023, 20:41:19 UTC | perf metrics: Fix SEGV with --for-each-cgroup Ensure the metric threshold is copied correctly or else a use of uninitialized memory happens. Fixes: d0a3052f6faefffc ("perf metric: Compute and print threshold values") Reported-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230505204119.3443491-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 05 May 2023, 22:18:55 UTC |
| a887466 | Arnaldo Carvalho de Melo | 04 May 2023, 22:03:51 UTC | perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE Linus reported a build break due to using a vmlinux without a BTF elf section to generate the vmlinux.h header with bpftool for use in the BPF tools in tools/perf/util/bpf_skel/*.bpf.c. Instead add a vmlinux.h file with the structs needed with the fields the tools need, marking the structs with __attribute__((preserve_access_index)), so that libbpf's CO-RE code can fixup the struct field offsets. In some cases the vmlinux.h file that was being generated by bpftool from the kernel BTF information was not needed at all, just including linux/bpf.h, sometimes linux/perf_event.h was enough as non-UAPI types were not being used. To keep te patch small, include those UAPI headers from the trimmed down vmlinux.h file, that then provides the tools with just the structs and the subset of its fields needed for them. Testing it: # perf lock contention -b find / > /dev/null ^C contended total wait max wait avg wait type caller 7 53.59 us 10.86 us 7.66 us rwlock:R start_this_handle+0xa0 2 30.35 us 21.99 us 15.17 us rwsem:R iterate_dir+0x52 1 9.04 us 9.04 us 9.04 us rwlock:W start_this_handle+0x291 1 8.73 us 8.73 us 8.73 us spinlock raw_spin_rq_lock_nested+0x1e # # perf lock contention -abl find / > /dev/null ^C contended total wait max wait avg wait address symbol 1 262.96 ms 262.96 ms 262.96 ms ffff8e67502d0170 (mutex) 12 244.24 us 39.91 us 20.35 us ffff8e6af56f8070 mmap_lock (rwsem) 7 30.28 us 6.85 us 4.33 us ffff8e6c865f1d40 rq_lock (spinlock) 3 7.42 us 4.03 us 2.47 us ffff8e6c864b1d40 rq_lock (spinlock) 2 3.72 us 2.19 us 1.86 us ffff8e6c86571d40 rq_lock (spinlock) 1 2.42 us 2.42 us 2.42 us ffff8e6c86471d40 rq_lock (spinlock) 4 2.11 us 559 ns 527 ns ffffffff9a146c80 rcu_state (spinlock) 3 1.45 us 818 ns 482 ns ffff8e674ae8384c (rwlock) 1 870 ns 870 ns 870 ns ffff8e68456ee060 (rwlock) 1 663 ns 663 ns 663 ns ffff8e6c864f1d40 rq_lock (spinlock) 1 573 ns 573 ns 573 ns ffff8e6c86531d40 rq_lock (spinlock) 1 472 ns 472 ns 472 ns ffff8e6c86431740 (spinlock) 1 397 ns 397 ns 397 ns ffff8e67413a4f04 (spinlock) # # perf test offcpu 95: perf record offcpu profiling tests : Ok # # perf kwork latency --use-bpf Starting trace, Hit <Ctrl+C> to stop and report ^C Kwork Name | Cpu | Avg delay | Count | Max delay | Max delay start | Max delay end | -------------------------------------------------------------------------------------------------------------------------------- (w)flush_memcg_stats_dwork | 0000 | 1056.212 ms | 2 | 2112.345 ms | 550113.229573 s | 550115.341919 s | (w)toggle_allocation_gate | 0000 | 10.144 ms | 62 | 416.389 ms | 550113.453518 s | 550113.869907 s | (w)0xffff8e6748e28080 | 0002 | 0.623 ms | 1 | 0.623 ms | 550110.989841 s | 550110.990464 s | (w)vmstat_shepherd | 0000 | 0.586 ms | 10 | 2.828 ms | 550111.971536 s | 550111.974364 s | (w)vmstat_update | 0007 | 0.363 ms | 5 | 1.634 ms | 550113.222520 s | 550113.224154 s | (w)vmstat_update | 0000 | 0.324 ms | 10 | 2.827 ms | 550111.971526 s | 550111.974354 s | (w)0xffff8e674c5f4a58 | 0002 | 0.102 ms | 5 | 0.134 ms | 550110.989839 s | 550110.989972 s | (w)psi_avgs_work | 0001 | 0.086 ms | 3 | 0.107 ms | 550114.957852 s | 550114.957959 s | (w)psi_avgs_work | 0000 | 0.079 ms | 5 | 0.100 ms | 550118.605668 s | 550118.605768 s | (w)kfree_rcu_monitor | 0006 | 0.079 ms | 1 | 0.079 ms | 550110.925821 s | 550110.925900 s | (w)psi_avgs_work | 0004 | 0.079 ms | 1 | 0.079 ms | 550109.581835 s | 550109.581914 s | (w)psi_avgs_work | 0001 | 0.078 ms | 1 | 0.078 ms | 550109.197809 s | 550109.197887 s | (w)psi_avgs_work | 0002 | 0.077 ms | 5 | 0.086 ms | 550110.669819 s | 550110.669905 s | <SNIP> # strace -e bpf -o perf-stat-bpf-counters.output perf stat -e cycles --bpf-counters sleep 1 Performance counter stats for 'sleep 1': 6,197,983 cycles 1.003922848 seconds time elapsed 0.000000000 seconds user 0.002032000 seconds sys # head -7 perf-stat-bpf-counters.output bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/perf_attr_map", bpf_fd=0, file_flags=0}, 16) = 3 bpf(BPF_OBJ_GET_INFO_BY_FD, {info={bpf_fd=3, info_len=88, info=0x7ffcead64990}}, 16) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=3, key=0x24129e0, value=0x7ffcead65a48, flags=BPF_ANY}, 32) = 0 bpf(BPF_LINK_GET_FD_BY_ID, {link_id=1252}, 12) = -1 ENOENT (No such file or directory) bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65780, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, +func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 116) = 4 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65920, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, +func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0, fd_array=NULL}, 128) = 4 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\20\0\0\0\20\0\0\0\5\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=45, btf_log_size=0, btf_log_level=0}, 28) = 4 # Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Song Liu <song@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Co-developed-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/lkml/ZFU1PJrn8YtHIqno@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 05 May 2023, 22:18:39 UTC |
| 644bca1 | Jakub Kicinski | 05 May 2023, 20:35:45 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next There's a fix which landed in net-next, pull it in along with the couple of minor cleanups. Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 05 May 2023, 20:35:45 UTC |
| ecc68ee | Dmitrii Dolgov | 12 April 2023, 18:23:16 UTC | perf stat: Separate bperf from bpf_profiler It seems that perf stat -b <prog id> doesn't produce any results: $ perf stat -e cycles -b 4 -I 10000 -vvv Control descriptor is not initialized cycles: 0 0 0 time counts unit events 10.007641640 <not supported> cycles Looks like this happens because fentry/fexit progs are getting loaded, but the corresponding perf event is not enabled and not added into the events bpf map. I think there is some mixing up between two type of bpf support, one for bperf and one for bpf_profiler. Both are identified via evsel__is_bpf, based on which perf events are enabled, but for the latter (bpf_profiler) a perf event is required. Using evsel__is_bperf to check only bperf produces expected results: $ perf stat -e cycles -b 4 -I 10000 -vvv Control descriptor is not initialized ------------------------------------------------------------ perf_event_attr: size 136 sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ [...perf_event_attr for other CPUs...] ------------------------------------------------------------ cycles: 309426 169009 169009 time counts unit events 10.010091271 309426 cycles The final numbers correspond (at least in the level of magnitude) to the same metric obtained via bpftool. Fixes: 112cb56164bc2108 ("perf stat: Introduce config stat.bpf-counter-events") Reviewed-by: Song Liu <song@kernel.org> Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com> Tested-by: Song Liu <song@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230412182316.11628-1-9erthalion6@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 05 May 2023, 20:30:05 UTC |
| 418d5c9 | Linus Torvalds | 05 May 2023, 20:27:59 UTC | Merge tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Add Conor Dooley as a DT binding maintainer - Swap the order of parsing /memreserve/ and /reserved-memory nodes so that the /reserved-memory nodes which have more information are handled first - Fix some property dependencies in riscv,pmu binding - Update maintainers entries on a couple of bindings * tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: MAINTAINERS: add Conor as a dt-bindings maintainer dt-bindings: perf: riscv,pmu: fix property dependencies dt-bindings: xilinx: Remove Naga from memory and mtd bindings of: fdt: Scan /memreserve/ last dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro | 05 May 2023, 20:27:59 UTC |
| 647681b | Linus Torvalds | 05 May 2023, 20:16:42 UTC | Merge tag 'docs-6.4-2' of git://git.lwn.net/linux Pull more documentation updates from Jonathan Corbet: "A handful of late-arriving documentation fixes, plus one Spanish translation that has been ready for some time but got applied late" * tag 'docs-6.4-2' of git://git.lwn.net/linux: docs/sp_SP: Add translation of process/adding-syscalls CREDITS: Update email address for Mat Martineau Documentation: update kernel stack for x86_64 docs: Remove unnecessary unicode character docs: fix "Reviewd" typo Documentation: timers: hrtimers: Make hybrid union historical docs/admin-guide/mm/ksm.rst fix intraface -> interface typo doc:it_IT: fix some typos | 05 May 2023, 20:16:42 UTC |
| e919a3f | Linus Torvalds | 05 May 2023, 20:11:02 UTC | Merge tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull more tracing updates from Steven Rostedt: - Make buffer_percent read/write. The buffer_percent file is how users can state how long to block on the tracing buffer depending on how much is in the buffer. When it hits the "buffer_percent" it will wake the task waiting on the buffer. For some reason it was set to read-only. This was not noticed because testing was done as root without SELinux, but with SELinux it will prevent even root to write to it without having CAP_DAC_OVERRIDE. - The "touched_functions" was added this merge window, but one of the reasons for adding it was not implemented. That was to show what functions were not only touched, but had either a direct trampoline attached to it, or a kprobe or live kernel patching that can "hijack" the function to run a different function. The point is to know if there's functions in the kernel that may not be behaving as the kernel code shows. This can be used for debugging. TODO: Add this information to kernel oops too. * tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached tracing: Fix permissions for the buffer_percent file | 05 May 2023, 20:11:02 UTC |
| b115d85 | Linus Torvalds | 05 May 2023, 19:56:55 UTC | Merge tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: - Introduce local{,64}_try_cmpxchg() - a slightly more optimal primitive, which will be used in perf events ring-buffer code - Simplify/modify rwsems on PREEMPT_RT, to address writer starvation - Misc cleanups/fixes * tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomic: Correct (cmp)xchg() instrumentation locking/x86: Define arch_try_cmpxchg_local() locking/arch: Wire up local_try_cmpxchg() locking/generic: Wire up local{,64}_try_cmpxchg() locking/atomic: Add generic try_cmpxchg{,64}_local() support locking/rwbase: Mitigate indefinite writer starvation locking/arch: Rename all internal __xchg() names to __arch_xchg() | 05 May 2023, 19:56:55 UTC |
| d5ed10b | Linus Torvalds | 05 May 2023, 19:29:57 UTC | Merge branch 'x86-uaccess-cleanup': x86 uaccess header cleanups Merge my x86 uaccess updates branch. The LAM ("Linear Address Masking") updates in this release made me unhappy about how "access_ok()" was done, and it actually turned out to have a couple of small bugs in it too. This is my cleanup of the code: - use the sign bit of the __user pointer rather than masking the address and checking it against the TASK_SIZE range. We already did this part for the get/put_user() side, but 'access_ok()' did the naïve "mask and range check" thing, which not only generates nasty code, but also ended up meaning that __access_ok itself didn't do a good job, and so copy_from_user_nmi() didn't get the check right. - move all the code that is 64-bit only into the 64-bit version of the header file, so that we don't unnecessarily pollute the shared x86 code and make it look like LAM might work in 32-bit too. - fix a bug in the address masking (that doesn't end up mattering: in this case the fix was to just remove the buggy code entirely). - a couple of trivial cleanups and added commentary about the access_ok() rules. * x86-uaccess-cleanup: x86-64: mm: clarify the 'positive addresses' user address rules x86: mm: remove 'sign' games from LAM untagged_addr*() macros x86: uaccess: move 32-bit and 64-bit parts into proper <asm/uaccess_N.h> header x86: mm: remove architecture-specific 'access_ok()' define x86-64: make access_ok() independent of LAM | 05 May 2023, 19:29:57 UTC |
| 982365a | Linus Torvalds | 05 May 2023, 19:23:33 UTC | Merge tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for hibernation - The .rela.dyn section has been moved to the init area - A fix for the SBI probing to allow for implementation-defined behavior - Various other fixes and cleanups throughout the tree * tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: include cpufeature.h in cpufeature.c riscv: Move .rela.dyn to the init sections dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support riscv: compat_syscall_table: Fixup compile warning RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename RISC-V: fix sifive and thead section mismatches in errata RISC-V: Align SBI probe implementation with spec riscv: mm: remove redundant parameter of create_fdt_early_page_table riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection RISC-V: Add arch functions to support hibernation/suspend-to-disk RISC-V: mm: Enable huge page support to kernel_page_present() function RISC-V: Factor out common code of __cpu_resume_enter() RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function | 05 May 2023, 19:23:33 UTC |
| 493804a | Linus Torvalds | 05 May 2023, 19:17:01 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull more kvm updates from Paolo Bonzini: "This includes the 6.4 changes for RISC-V, and a few bugfix patches for other architectures. For x86, this closes a longstanding performance issue in the newer and (usually) more scalable page table management code. RISC-V: - ONE_REG interface to enable/disable SBI extensions - Zbb extension for Guest/VM - AIA CSR virtualization x86: - Fix a long-standing TDP MMU flaw, where unloading roots on a vCPU can result in the root being freed even though the root is completely valid and can be reused as-is (with a TLB flush). s390: - A couple of bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix race in gmap_make_secure() KVM: s390: pv: fix asynchronous teardown for small VMs KVM: x86: Preserve TDP MMU roots until they are explicitly invalidated RISC-V: KVM: Virtualize per-HART AIA CSRs RISC-V: KVM: Use bitmap for irqs_pending and irqs_pending_mask RISC-V: KVM: Add ONE_REG interface for AIA CSRs RISC-V: KVM: Implement subtype for CSR ONE_REG interface RISC-V: KVM: Initial skeletal support for AIA RISC-V: KVM: Drop the _MASK suffix from hgatp.VMID mask defines RISC-V: Detect AIA CSRs from ISA string RISC-V: Add AIA related CSR defines RISC-V: KVM: Allow Zbb extension for Guest/VM RISC-V: KVM: Add ONE_REG interface to enable/disable SBI extensions RISC-V: KVM: Alphabetize selects KVM: RISC-V: Retry fault if vma_lookup() results become invalid | 05 May 2023, 19:17:01 UTC |
| 7163a21 | Linus Torvalds | 05 May 2023, 19:10:09 UTC | Merge tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Remove an ACPI backlight quirk for Lenovo ThinkPad W530, added during the 6.3 cycle, that turned out to do more harm than help (Hans de Goede)" * tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530 | 05 May 2023, 19:10:09 UTC |
| 817e1af | Linus Torvalds | 05 May 2023, 19:05:00 UTC | Merge tag 'thermal-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix a NULL pointer dereference in the Intel powerclamp driver introduced during the 6.3 cycle and update MAINTAINERS to match recent code changes. Specifics: - Fix NULL pointer access in the Intel powerclamp thermal driver that occurs on attempts to set the cooling device state to 0 in the default configuration (Srinivas Pandruvada) - Drop the stale MAINTAINERS entry for the Intel Menlow thermal driver that has been removed recently (Lukas Bulwahn)" * tag 'thermal-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER thermal: intel: powerclamp: Fix NULL pointer access issue | 05 May 2023, 19:05:00 UTC |
| b49178e | Linus Torvalds | 05 May 2023, 18:57:29 UTC | Merge tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: - Fix for mediatek driver warning for variable used uninitialized and for wrong pll math * tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: mediatek: hdmi: mt8195: fix wrong pll calculus phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc | 05 May 2023, 18:57:29 UTC |
| 084f51d | Linus Torvalds | 05 May 2023, 18:49:22 UTC | Merge tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm Pull more drm fixes from Dave Airlie: "This is the fixes for the last couple of weeks for i915 and last 3 weeks for amdgpu, lots of them but pretty scattered around and all pretty small. amdgpu: - SR-IOV fixes - DCN 3.2 fixes - DC mclk handling fixes - eDP fixes - SubVP fixes - HDCP regression fix - DSC fixes - DC FP fixes - DCN 3.x fixes - Display flickering fix when switching between vram and gtt - Z8 power saving fix - Fix hang when skipping modeset - GPU reset fixes - Doorbell fix when resizing BARs - Fix spurious warnings in gmc - Locking fix for AMDGPU_SCHED IOCTL - SR-IOV fix - DCN 3.1.4 fix - DCN 3.2 fix - Fix job cleanup when CS is aborted i915: - skl pipe source size check - mtl transcoder mask fix - DSI power on sequence fix - GuC versioning corner case fix" * tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits) drm/amdgpu: drop redundant sched job cleanup when cs is aborted drm/amd/display: filter out invalid bits in pipe_fuses drm/amd/display: Change default Z8 watermark values drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV drm/amdgpu: add a missing lock for AMDGPU_SCHED drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini() drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini drm/amdgpu: Enable doorbell selfring after resize FB BAR drm/amdgpu: Use the default reset when loading or reloading the driver drm/amdgpu: Fix mode2 reset for sienna cichlid drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep() drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info drm/i915/guc: Actually return an error if GuC version range check fails drm/amd/display: Lowering min Z8 residency time drm/amd/display: fix flickering caused by S/G mode drm/amd/display: Set min_width and min_height capability for DCN30 drm/amd/display: Isolate remaining FPU code in DCN32 drm/amd/display: Update bounding box values for DCN321 drm/amd/display: Do not clear GPINT register when releasing DMUB from reset ... | 05 May 2023, 18:49:22 UTC |
| ee2dd70 | Oswald Buddenhagen | 05 May 2023, 15:52:44 UTC | ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence() We already know that `frames` is greater than zero, because we just checked it. So we don't need to check the loop condition on the first iteration. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-7-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:53 UTC |
| 6ffa6f3 | Oswald Buddenhagen | 05 May 2023, 15:52:43 UTC | ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence() Inline the remaining call of snd_pcm_playback_hw_avail(). This makes the top-up branch more congruent with the thresholded one, and allows simplifying the handling of the corner cases. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-6-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:52 UTC |
| 6d8d56d | Jaroslav Kysela | 05 May 2023, 15:52:42 UTC | ALSA: pcm: playback silence - move silence variable updates to separate function The code tracking the added samples in thresholded mode and the code tracking the just played samples in top-up mode are semantically identical, so factor it out to a common function to enhance readability. Co-developed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230505155244.2312199-5-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:52 UTC |
| 190cb66 | Jaroslav Kysela | 05 May 2023, 15:52:41 UTC | ALSA: pcm: playback silence - remove extra code The removed condition handles de facto only one situation where runtime->silence_filled variable is equal to runtime->buffer_size, because this variable cannot go over the buffer size. This case is implicitly caught by the required comparison of the noise distance with the threshold. Suggested-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-4-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:51 UTC |
| 781b4da | Jaroslav Kysela | 05 May 2023, 15:52:40 UTC | ALSA: pcm: fix playback silence - correct incremental silencing Commit 9a826ddba6e ("[ALSA] pcm core: fix silence_start calculations") came with exactly the right commit message, but the patch just made things broken in a different way: We'd fill at a too low address if the area was already partially zeroed, so we'd under-fill. This affected both thresholded mode (where it was somewhat less likely) and top-up mode (where it would be the case consistently). Co-developed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230505155244.2312199-3-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:50 UTC |
| 2fbaa44 | Jaroslav Kysela | 05 May 2023, 15:52:39 UTC | ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode The snd_pcm_playback_hw_avail() function uses runtime->status->hw_ptr. Unfortunately, in case when we call this function from snd_pcm_update_hw_ptr0(), this variable contains the previous hardware pointer. Use the new_hw_ptr argument to calculate hw_avail (filled samples by the user space) to correct the threshold comparison. The new_hw_ptr argument may also be set to ULONG_MAX which means the initialization phase. In this case, use runtime->status->hw_ptr. Suggested-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-2-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:49 UTC |
| d7f5dd9 | Jaroslav Kysela | 05 May 2023, 15:52:38 UTC | ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()" This reverts commit 9f656705c5faa18afb26d922cfc64f9fd103c38d. There was a regression (in the top-up mode). Unfortunately, the patch provided from the author of this commit is not easy to review. Keep the updated and new comments in headers. Also add a new comment that documents the missed API constraint which led to the regression. Reported-by: Jeff Chua <jeff.chua.linux@gmail.com> Link: https://lore.kernel.org/r/CAAJw_ZsbTVd3Es373x_wTNDF7RknGhCD0r+NKUSwAO7HpLAkYA@mail.gmail.com Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-1-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:48 UTC |
| 56fc217 | Kai-Heng Feng | 05 May 2023, 12:59:23 UTC | ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop There's another laptop that needs the fixup to enable mute and micmute LEDs. So do it accordingly. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230505125925.543601-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 15:12:28 UTC |
| 4a22488 | Takashi Iwai | 05 May 2023, 15:11:08 UTC | Merge tag 'asoc-fix-v6.4-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.4 A small set of fixes and device quirks that have come in during the merge window, the Qualcomm fix seems quite large but it's mainly code motion so looks larger than it is. | 05 May 2023, 15:11:08 UTC |
| 6ce2c04 | Steven Rostedt (Google) | 03 May 2023, 01:32:33 UTC | ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached If a function had ever had IPMODIFY or DIRECT attached to it, where this is how live kernel patching and BPF overrides work, mark them and display an "M" in the enabled_functions and touched_functions files. This can be used for debugging. If a function had been modified and later there's a bug in the code related to that function, this can be used to know if the cause is possibly from a live kernel patch or a BPF program that changed the behavior of the code. Also update the documentation on the enabled_functions and touched_functions output, as it was missing direct callers and CALL_OPS. And include this new modify attribute. Link: https://lore.kernel.org/linux-trace-kernel/20230502213233.004e3ae4@gandalf.local.home Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> | 05 May 2023, 15:09:25 UTC |
| 2492ba4 | Lukas Bulwahn | 05 May 2023, 04:36:05 UTC | MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER Commit 2b6a7409ac39 ("thermal: intel: menlow: Get rid of this driver") removes the driver drivers/thermal/intel/intel_menlow.c, but misses to remove its reference in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Remove the INTEL MENLOW THERMAL DRIVER section in MAINTAINERS. Fixes: 2b6a7409ac39 ("thermal: intel: menlow: Get rid of this driver") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 05 May 2023, 14:10:12 UTC |
| 6997f84 | Conor Dooley | 04 May 2023, 21:58:39 UTC | MAINTAINERS: add Conor as a dt-bindings maintainer Rob asked if I would be interested in helping with the dt-bindings maintenance, and since I am a glutton for punishment I accepted. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230504-renderer-alive-1c01d431b2a7@spud Signed-off-by: Rob Herring <robh@kernel.org> | 05 May 2023, 12:45:17 UTC |
