Revision 85bd839983778fcd0c1c043327b14a046e979b39 authored by Gu Zheng on 10 June 2015, 18:14:43 UTC, committed by Linus Torvalds on 10 June 2015, 23:43:43 UTC
Izumi found the following oops when hot re-adding a node: BUG: unable to handle kernel paging request at ffffc90008963690 IP: __wake_up_bit+0x20/0x70 Oops: 0000 [#1] SMP CPU: 68 PID: 1237 Comm: rs:main Q:Reg Not tainted 4.1.0-rc5 #80 Hardware name: FUJITSU PRIMEQUEST2800E/SB, BIOS PRIMEQUEST 2000 Series BIOS Version 1.87 04/28/2015 task: ffff880838df8000 ti: ffff880017b94000 task.ti: ffff880017b94000 RIP: 0010:[<ffffffff810dff80>] [<ffffffff810dff80>] __wake_up_bit+0x20/0x70 RSP: 0018:ffff880017b97be8 EFLAGS: 00010246 RAX: ffffc90008963690 RBX: 00000000003c0000 RCX: 000000000000a4c9 RDX: 0000000000000000 RSI: ffffea101bffd500 RDI: ffffc90008963648 RBP: ffff880017b97c08 R08: 0000000002000020 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a0797c73800 R13: ffffea101bffd500 R14: 0000000000000001 R15: 00000000003c0000 FS: 00007fcc7ffff700(0000) GS:ffff880874800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc90008963690 CR3: 0000000836761000 CR4: 00000000001407e0 Call Trace: unlock_page+0x6d/0x70 generic_write_end+0x53/0xb0 xfs_vm_write_end+0x29/0x80 [xfs] generic_perform_write+0x10a/0x1e0 xfs_file_buffered_aio_write+0x14d/0x3e0 [xfs] xfs_file_write_iter+0x79/0x120 [xfs] __vfs_write+0xd4/0x110 vfs_write+0xac/0x1c0 SyS_write+0x58/0xd0 system_call_fastpath+0x12/0x76 Code: 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 48 8d 47 48 <48> 39 47 48 48 c7 45 e8 00 00 00 00 48 c7 45 f0 00 00 00 00 48 RIP [<ffffffff810dff80>] __wake_up_bit+0x20/0x70 RSP <ffff880017b97be8> CR2: ffffc90008963690 Reproduce method (re-add a node):: Hot-add nodeA --> remove nodeA --> hot-add nodeA (panic) This seems an use-after-free problem, and the root cause is zone->wait_table was not set to *NULL* after free it in try_offline_node. When hot re-add a node, we will reuse the pgdat of it, so does the zone struct, and when add pages to the target zone, it will init the zone first (including the wait_table) if the zone is not initialized. The judgement of zone initialized is based on zone->wait_table: static inline bool zone_is_initialized(struct zone *zone) { return !!zone->wait_table; } so if we do not set the zone->wait_table to *NULL* after free it, the memory hotplug routine will skip the init of new zone when hot re-add the node, and the wait_table still points to the freed memory, then we will access the invalid address when trying to wake up the waiting people after the i/o operation with the page is done, such as mentioned above. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Reported-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Reviewed by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent 5879ae5
hid-gaff.c
/*
* Force feedback support for GreenAsia (Product ID 0x12) based devices
*
* The devices are distributed under various names and the same USB device ID
* can be used in many game controllers.
*
*
* 0e8f:0012 "GreenAsia Inc. USB Joystick "
* - tested with MANTA Warior MM816 and SpeedLink Strike2 SL-6635.
*
* Copyright (c) 2008 Lukasz Lubojanski <lukasz@lubojanski.info>
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/hid.h>
#include <linux/module.h>
#include "hid-ids.h"
#ifdef CONFIG_GREENASIA_FF
struct gaff_device {
struct hid_report *report;
};
static int hid_gaff_play(struct input_dev *dev, void *data,
struct ff_effect *effect)
{
struct hid_device *hid = input_get_drvdata(dev);
struct gaff_device *gaff = data;
int left, right;
left = effect->u.rumble.strong_magnitude;
right = effect->u.rumble.weak_magnitude;
dbg_hid("called with 0x%04x 0x%04x", left, right);
left = left * 0xfe / 0xffff;
right = right * 0xfe / 0xffff;
gaff->report->field[0]->value[0] = 0x51;
gaff->report->field[0]->value[1] = 0x0;
gaff->report->field[0]->value[2] = right;
gaff->report->field[0]->value[3] = 0;
gaff->report->field[0]->value[4] = left;
gaff->report->field[0]->value[5] = 0;
dbg_hid("running with 0x%02x 0x%02x", left, right);
hid_hw_request(hid, gaff->report, HID_REQ_SET_REPORT);
gaff->report->field[0]->value[0] = 0xfa;
gaff->report->field[0]->value[1] = 0xfe;
gaff->report->field[0]->value[2] = 0x0;
gaff->report->field[0]->value[4] = 0x0;
hid_hw_request(hid, gaff->report, HID_REQ_SET_REPORT);
return 0;
}
static int gaff_init(struct hid_device *hid)
{
struct gaff_device *gaff;
struct hid_report *report;
struct hid_input *hidinput = list_entry(hid->inputs.next,
struct hid_input, list);
struct list_head *report_list =
&hid->report_enum[HID_OUTPUT_REPORT].report_list;
struct list_head *report_ptr = report_list;
struct input_dev *dev = hidinput->input;
int error;
if (list_empty(report_list)) {
hid_err(hid, "no output reports found\n");
return -ENODEV;
}
report_ptr = report_ptr->next;
report = list_entry(report_ptr, struct hid_report, list);
if (report->maxfield < 1) {
hid_err(hid, "no fields in the report\n");
return -ENODEV;
}
if (report->field[0]->report_count < 6) {
hid_err(hid, "not enough values in the field\n");
return -ENODEV;
}
gaff = kzalloc(sizeof(struct gaff_device), GFP_KERNEL);
if (!gaff)
return -ENOMEM;
set_bit(FF_RUMBLE, dev->ffbit);
error = input_ff_create_memless(dev, gaff, hid_gaff_play);
if (error) {
kfree(gaff);
return error;
}
gaff->report = report;
gaff->report->field[0]->value[0] = 0x51;
gaff->report->field[0]->value[1] = 0x00;
gaff->report->field[0]->value[2] = 0x00;
gaff->report->field[0]->value[3] = 0x00;
hid_hw_request(hid, gaff->report, HID_REQ_SET_REPORT);
gaff->report->field[0]->value[0] = 0xfa;
gaff->report->field[0]->value[1] = 0xfe;
hid_hw_request(hid, gaff->report, HID_REQ_SET_REPORT);
hid_info(hid, "Force Feedback for GreenAsia 0x12 devices by Lukasz Lubojanski <lukasz@lubojanski.info>\n");
return 0;
}
#else
static inline int gaff_init(struct hid_device *hdev)
{
return 0;
}
#endif
static int ga_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
dev_dbg(&hdev->dev, "Greenasia HID hardware probe...");
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
goto err;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
if (ret) {
hid_err(hdev, "hw start failed\n");
goto err;
}
gaff_init(hdev);
return 0;
err:
return ret;
}
static const struct hid_device_id ga_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012), },
{ }
};
MODULE_DEVICE_TABLE(hid, ga_devices);
static struct hid_driver ga_driver = {
.name = "greenasia",
.id_table = ga_devices,
.probe = ga_probe,
};
module_hid_driver(ga_driver);
MODULE_LICENSE("GPL");
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...