Revision 865f5b671b48d0088ce981cff1e822d9f7da441f authored by Marc Kleine-Budde on 27 November 2020, 07:35:12 UTC, committed by Marc Kleine-Budde on 27 November 2020, 09:49:20 UTC
The threaded IRQ handler is used for the tcan4x5x driver only. The IRQ pin of the tcan4x5x controller is active low, so better not use IRQF_TRIGGER_FALLING when requesting the IRQ. As this can result in missing interrupts. Further, if the device tree specified the interrupt as "IRQ_TYPE_LEVEL_LOW", unloading and reloading of the driver results in the following error during ifup: | irq: type mismatch, failed to map hwirq-31 for gpio@20a8000! | tcan4x5x spi1.1: m_can device registered (irq=0, version=32) | tcan4x5x spi1.1 can2: TCAN4X5X successfully initialized. | tcan4x5x spi1.1 can2: failed to request interrupt This patch fixes the problem by removing the IRQF_TRIGGER_FALLING from the request_threaded_irq(). Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Cc: Dan Murphy <dmurphy@ti.com> Cc: Sriram Dash <sriram.dash@samsung.com> Cc: Pankaj Sharma <pankj.sharma@samsung.com> Link: https://lore.kernel.org/r/20201127093548.509253-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
1 parent 1a1c436
File | Mode | Size |
---|---|---|
Documentation | ||
LICENSES | ||
arch | ||
block | ||
certs | ||
crypto | ||
drivers | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.clang-format | -rw-r--r-- | 16.3 KB |
.cocciconfig | -rw-r--r-- | 59 bytes |
.get_maintainer.ignore | -rw-r--r-- | 71 bytes |
.gitattributes | -rw-r--r-- | 62 bytes |
.gitignore | -rw-r--r-- | 1.8 KB |
.mailmap | -rw-r--r-- | 17.6 KB |
COPYING | -rw-r--r-- | 496 bytes |
CREDITS | -rw-r--r-- | 98.0 KB |
Kbuild | -rw-r--r-- | 1.3 KB |
Kconfig | -rw-r--r-- | 555 bytes |
MAINTAINERS | -rw-r--r-- | 562.2 KB |
Makefile | -rw-r--r-- | 62.7 KB |
README | -rw-r--r-- | 727 bytes |
Computing file changes ...