swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Revision 86de5921a3d5dd246df661e09bdd0a6131b39ae3 authored by Eric Dumazet on 20 November 2018, 13:53:59 UTC, committed by David S. Miller on 21 November 2018, 23:49:52 UTC
Jean-Louis reported a TCP regression and bisected to recent SACK compression. After a loss episode (receiver not able to keep up and dropping packets because its backlog is full), linux TCP stack is sending a single SACK (DUPACK). Sender waits a full RTO timer before recovering losses. While RFC 6675 says in section 5, "Algorithm Details", (2) If DupAcks < DupThresh but IsLost (HighACK + 1) returns true -- indicating at least three segments have arrived above the current cumulative acknowledgment point, which is taken to indicate loss -- go to step (4). ... (4) Invoke fast retransmit and enter loss recovery as follows: there are old TCP stacks not implementing this strategy, and still counting the dupacks before starting fast retransmit. While these stacks probably perform poorly when receivers implement LRO/GRO, we should be a little more gentle to them. This patch makes sure we do not enable SACK compression unless 3 dupacks have been sent since last rcv_nxt update. Ideally we should even rearm the timer to send one or two more DUPACK if no more packets are coming, but that will be work aiming for linux-4.21. Many thanks to Jean-Louis for bisecting the issue, providing packet captures and testing this patch. Fixes: 5d9f4262b7ea ("tcp: add SACK compression") Reported-by: Jean-Louis Dupond <jean-louis@dupond.be> Tested-by: Jean-Louis Dupond <jean-louis@dupond.be> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent b5dd186
Tip revision: 644e9524388a5dbc6d4f58c492ee9ef7bd4ddf4d authored by Linus Torvalds on 26 November 2022, 02:02:49 UTC
Merge tag 'for-v6.1-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Merge tag 'for-v6.1-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Tip revision: 644e952
File | Mode | Size |
---|---|---|
Documentation | ||
LICENSES | ||
arch | ||
block | ||
certs | ||
crypto | ||
drivers | ||
firmware | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.clang-format | -rw-r--r-- | 12.7 KB |
.cocciconfig | -rw-r--r-- | 59 bytes |
.get_maintainer.ignore | -rw-r--r-- | 31 bytes |
.gitattributes | -rw-r--r-- | 30 bytes |
.gitignore | -rw-r--r-- | 1.5 KB |
.mailmap | -rw-r--r-- | 10.5 KB |
COPYING | -rw-r--r-- | 423 bytes |
CREDITS | -rw-r--r-- | 96.5 KB |
Kbuild | -rw-r--r-- | 2.2 KB |
Kconfig | -rw-r--r-- | 563 bytes |
MAINTAINERS | -rw-r--r-- | 470.9 KB |
Makefile | -rw-r--r-- | 59.7 KB |
README | -rw-r--r-- | 727 bytes |
Computing file changes ...