Revision 8700aff089843399f95bc7701ae87b642b35a716 authored by Edward Cree on 20 December 2019, 16:26:40 UTC, committed by David S. Miller on 21 December 2019, 05:56:48 UTC
It was possible for channel allocation logic to get confused between what it had and what it wanted, and end up trying to use the same channel for both PTP and regular TX. This led to a kernel panic: BUG: unable to handle page fault for address: 0000000000047635 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0-rc3-ehc14+ #900 Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013 RIP: 0010:native_queued_spin_lock_slowpath+0x188/0x1e0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb e8 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 c0 98 02 00 48 03 04 f5 a0 c6 ed 81 <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffc90000003d28 EFLAGS: 00010006 RAX: 0000000000047635 RBX: 0000000000000246 RCX: 0000000000040000 RDX: ffff888627a298c0 RSI: 0000000000003ffe RDI: ffff88861f6b8dd4 RBP: ffff8886225c6e00 R08: 0000000000040000 R09: 0000000000000000 R10: 0000000616f080c6 R11: 00000000000000c0 R12: ffff88861f6b8dd4 R13: ffffc90000003dc8 R14: ffff88861942bf00 R15: ffff8886150f2000 FS: 0000000000000000(0000) GS:ffff888627a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000047635 CR3: 000000000200a000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x22/0x30 skb_queue_tail+0x1b/0x50 sock_queue_err_skb+0x9d/0xf0 __skb_complete_tx_timestamp+0x9d/0xc0 efx_dequeue_buffer+0x126/0x180 [sfc] efx_xmit_done+0x73/0x1c0 [sfc] efx_ef10_ev_process+0x56a/0xfe0 [sfc] ? tick_sched_do_timer+0x60/0x60 ? timerqueue_add+0x5d/0x70 ? enqueue_hrtimer+0x39/0x90 efx_poll+0x111/0x380 [sfc] ? rcu_accelerate_cbs+0x50/0x160 net_rx_action+0x14a/0x400 __do_softirq+0xdd/0x2d0 irq_exit+0xa0/0xb0 do_IRQ+0x53/0xe0 common_interrupt+0xf/0xf </IRQ> In the long run we intend to rewrite the channel allocation code, but for 'net' fix this by allocating extra_channels, and giving them TX queues, even if we do not in fact need them (e.g. on NICs without MAC TX timestamping), and thereby using simpler logic to assign the channels once they're allocated. Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 258a980
blk-flush.c
// SPDX-License-Identifier: GPL-2.0
/*
* Functions to sequence PREFLUSH and FUA writes.
*
* Copyright (C) 2011 Max Planck Institute for Gravitational Physics
* Copyright (C) 2011 Tejun Heo <tj@kernel.org>
*
* REQ_{PREFLUSH|FUA} requests are decomposed to sequences consisted of three
* optional steps - PREFLUSH, DATA and POSTFLUSH - according to the request
* properties and hardware capability.
*
* If a request doesn't have data, only REQ_PREFLUSH makes sense, which
* indicates a simple flush request. If there is data, REQ_PREFLUSH indicates
* that the device cache should be flushed before the data is executed, and
* REQ_FUA means that the data must be on non-volatile media on request
* completion.
*
* If the device doesn't have writeback cache, PREFLUSH and FUA don't make any
* difference. The requests are either completed immediately if there's no data
* or executed as normal requests otherwise.
*
* If the device has writeback cache and supports FUA, REQ_PREFLUSH is
* translated to PREFLUSH but REQ_FUA is passed down directly with DATA.
*
* If the device has writeback cache and doesn't support FUA, REQ_PREFLUSH
* is translated to PREFLUSH and REQ_FUA to POSTFLUSH.
*
* The actual execution of flush is double buffered. Whenever a request
* needs to execute PRE or POSTFLUSH, it queues at
* fq->flush_queue[fq->flush_pending_idx]. Once certain criteria are met, a
* REQ_OP_FLUSH is issued and the pending_idx is toggled. When the flush
* completes, all the requests which were pending are proceeded to the next
* step. This allows arbitrary merging of different types of PREFLUSH/FUA
* requests.
*
* Currently, the following conditions are used to determine when to issue
* flush.
*
* C1. At any given time, only one flush shall be in progress. This makes
* double buffering sufficient.
*
* C2. Flush is deferred if any request is executing DATA of its sequence.
* This avoids issuing separate POSTFLUSHes for requests which shared
* PREFLUSH.
*
* C3. The second condition is ignored if there is a request which has
* waited longer than FLUSH_PENDING_TIMEOUT. This is to avoid
* starvation in the unlikely case where there are continuous stream of
* FUA (without PREFLUSH) requests.
*
* For devices which support FUA, it isn't clear whether C2 (and thus C3)
* is beneficial.
*
* Note that a sequenced PREFLUSH/FUA request with DATA is completed twice.
* Once while executing DATA and again after the whole sequence is
* complete. The first completion updates the contained bio but doesn't
* finish it so that the bio submitter is notified only after the whole
* sequence is complete. This is implemented by testing RQF_FLUSH_SEQ in
* req_bio_endio().
*
* The above peculiarity requires that each PREFLUSH/FUA request has only one
* bio attached to it, which is guaranteed as they aren't allowed to be
* merged in the usual way.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/gfp.h>
#include <linux/blk-mq.h>
#include "blk.h"
#include "blk-mq.h"
#include "blk-mq-tag.h"
#include "blk-mq-sched.h"
/* PREFLUSH/FUA sequences */
enum {
REQ_FSEQ_PREFLUSH = (1 << 0), /* pre-flushing in progress */
REQ_FSEQ_DATA = (1 << 1), /* data write in progress */
REQ_FSEQ_POSTFLUSH = (1 << 2), /* post-flushing in progress */
REQ_FSEQ_DONE = (1 << 3),
REQ_FSEQ_ACTIONS = REQ_FSEQ_PREFLUSH | REQ_FSEQ_DATA |
REQ_FSEQ_POSTFLUSH,
/*
* If flush has been pending longer than the following timeout,
* it's issued even if flush_data requests are still in flight.
*/
FLUSH_PENDING_TIMEOUT = 5 * HZ,
};
static void blk_kick_flush(struct request_queue *q,
struct blk_flush_queue *fq, unsigned int flags);
static unsigned int blk_flush_policy(unsigned long fflags, struct request *rq)
{
unsigned int policy = 0;
if (blk_rq_sectors(rq))
policy |= REQ_FSEQ_DATA;
if (fflags & (1UL << QUEUE_FLAG_WC)) {
if (rq->cmd_flags & REQ_PREFLUSH)
policy |= REQ_FSEQ_PREFLUSH;
if (!(fflags & (1UL << QUEUE_FLAG_FUA)) &&
(rq->cmd_flags & REQ_FUA))
policy |= REQ_FSEQ_POSTFLUSH;
}
return policy;
}
static unsigned int blk_flush_cur_seq(struct request *rq)
{
return 1 << ffz(rq->flush.seq);
}
static void blk_flush_restore_request(struct request *rq)
{
/*
* After flush data completion, @rq->bio is %NULL but we need to
* complete the bio again. @rq->biotail is guaranteed to equal the
* original @rq->bio. Restore it.
*/
rq->bio = rq->biotail;
/* make @rq a normal request */
rq->rq_flags &= ~RQF_FLUSH_SEQ;
rq->end_io = rq->flush.saved_end_io;
}
static void blk_flush_queue_rq(struct request *rq, bool add_front)
{
blk_mq_add_to_requeue_list(rq, add_front, true);
}
static void blk_account_io_flush(struct request *rq)
{
struct hd_struct *part = &rq->rq_disk->part0;
part_stat_lock();
part_stat_inc(part, ios[STAT_FLUSH]);
part_stat_add(part, nsecs[STAT_FLUSH],
ktime_get_ns() - rq->start_time_ns);
part_stat_unlock();
}
/**
* blk_flush_complete_seq - complete flush sequence
* @rq: PREFLUSH/FUA request being sequenced
* @fq: flush queue
* @seq: sequences to complete (mask of %REQ_FSEQ_*, can be zero)
* @error: whether an error occurred
*
* @rq just completed @seq part of its flush sequence, record the
* completion and trigger the next step.
*
* CONTEXT:
* spin_lock_irq(fq->mq_flush_lock)
*
* RETURNS:
* %true if requests were added to the dispatch queue, %false otherwise.
*/
static void blk_flush_complete_seq(struct request *rq,
struct blk_flush_queue *fq,
unsigned int seq, blk_status_t error)
{
struct request_queue *q = rq->q;
struct list_head *pending = &fq->flush_queue[fq->flush_pending_idx];
unsigned int cmd_flags;
BUG_ON(rq->flush.seq & seq);
rq->flush.seq |= seq;
cmd_flags = rq->cmd_flags;
if (likely(!error))
seq = blk_flush_cur_seq(rq);
else
seq = REQ_FSEQ_DONE;
switch (seq) {
case REQ_FSEQ_PREFLUSH:
case REQ_FSEQ_POSTFLUSH:
/* queue for flush */
if (list_empty(pending))
fq->flush_pending_since = jiffies;
list_move_tail(&rq->flush.list, pending);
break;
case REQ_FSEQ_DATA:
list_move_tail(&rq->flush.list, &fq->flush_data_in_flight);
blk_flush_queue_rq(rq, true);
break;
case REQ_FSEQ_DONE:
/*
* @rq was previously adjusted by blk_insert_flush() for
* flush sequencing and may already have gone through the
* flush data request completion path. Restore @rq for
* normal completion and end it.
*/
BUG_ON(!list_empty(&rq->queuelist));
list_del_init(&rq->flush.list);
blk_flush_restore_request(rq);
blk_mq_end_request(rq, error);
break;
default:
BUG();
}
blk_kick_flush(q, fq, cmd_flags);
}
static void flush_end_io(struct request *flush_rq, blk_status_t error)
{
struct request_queue *q = flush_rq->q;
struct list_head *running;
struct request *rq, *n;
unsigned long flags = 0;
struct blk_flush_queue *fq = blk_get_flush_queue(q, flush_rq->mq_ctx);
struct blk_mq_hw_ctx *hctx;
blk_account_io_flush(flush_rq);
/* release the tag's ownership to the req cloned from */
spin_lock_irqsave(&fq->mq_flush_lock, flags);
if (!refcount_dec_and_test(&flush_rq->ref)) {
fq->rq_status = error;
spin_unlock_irqrestore(&fq->mq_flush_lock, flags);
return;
}
if (fq->rq_status != BLK_STS_OK)
error = fq->rq_status;
hctx = flush_rq->mq_hctx;
if (!q->elevator) {
blk_mq_tag_set_rq(hctx, flush_rq->tag, fq->orig_rq);
flush_rq->tag = -1;
} else {
blk_mq_put_driver_tag(flush_rq);
flush_rq->internal_tag = -1;
}
running = &fq->flush_queue[fq->flush_running_idx];
BUG_ON(fq->flush_pending_idx == fq->flush_running_idx);
/* account completion of the flush request */
fq->flush_running_idx ^= 1;
/* and push the waiting requests to the next stage */
list_for_each_entry_safe(rq, n, running, flush.list) {
unsigned int seq = blk_flush_cur_seq(rq);
BUG_ON(seq != REQ_FSEQ_PREFLUSH && seq != REQ_FSEQ_POSTFLUSH);
blk_flush_complete_seq(rq, fq, seq, error);
}
fq->flush_queue_delayed = 0;
spin_unlock_irqrestore(&fq->mq_flush_lock, flags);
}
/**
* blk_kick_flush - consider issuing flush request
* @q: request_queue being kicked
* @fq: flush queue
* @flags: cmd_flags of the original request
*
* Flush related states of @q have changed, consider issuing flush request.
* Please read the comment at the top of this file for more info.
*
* CONTEXT:
* spin_lock_irq(fq->mq_flush_lock)
*
*/
static void blk_kick_flush(struct request_queue *q, struct blk_flush_queue *fq,
unsigned int flags)
{
struct list_head *pending = &fq->flush_queue[fq->flush_pending_idx];
struct request *first_rq =
list_first_entry(pending, struct request, flush.list);
struct request *flush_rq = fq->flush_rq;
/* C1 described at the top of this file */
if (fq->flush_pending_idx != fq->flush_running_idx || list_empty(pending))
return;
/* C2 and C3
*
* For blk-mq + scheduling, we can risk having all driver tags
* assigned to empty flushes, and we deadlock if we are expecting
* other requests to make progress. Don't defer for that case.
*/
if (!list_empty(&fq->flush_data_in_flight) && q->elevator &&
time_before(jiffies,
fq->flush_pending_since + FLUSH_PENDING_TIMEOUT))
return;
/*
* Issue flush and toggle pending_idx. This makes pending_idx
* different from running_idx, which means flush is in flight.
*/
fq->flush_pending_idx ^= 1;
blk_rq_init(q, flush_rq);
/*
* In case of none scheduler, borrow tag from the first request
* since they can't be in flight at the same time. And acquire
* the tag's ownership for flush req.
*
* In case of IO scheduler, flush rq need to borrow scheduler tag
* just for cheating put/get driver tag.
*/
flush_rq->mq_ctx = first_rq->mq_ctx;
flush_rq->mq_hctx = first_rq->mq_hctx;
if (!q->elevator) {
fq->orig_rq = first_rq;
flush_rq->tag = first_rq->tag;
blk_mq_tag_set_rq(flush_rq->mq_hctx, first_rq->tag, flush_rq);
} else {
flush_rq->internal_tag = first_rq->internal_tag;
}
flush_rq->cmd_flags = REQ_OP_FLUSH | REQ_PREFLUSH;
flush_rq->cmd_flags |= (flags & REQ_DRV) | (flags & REQ_FAILFAST_MASK);
flush_rq->rq_flags |= RQF_FLUSH_SEQ;
flush_rq->rq_disk = first_rq->rq_disk;
flush_rq->end_io = flush_end_io;
blk_flush_queue_rq(flush_rq, false);
}
static void mq_flush_data_end_io(struct request *rq, blk_status_t error)
{
struct request_queue *q = rq->q;
struct blk_mq_hw_ctx *hctx = rq->mq_hctx;
struct blk_mq_ctx *ctx = rq->mq_ctx;
unsigned long flags;
struct blk_flush_queue *fq = blk_get_flush_queue(q, ctx);
if (q->elevator) {
WARN_ON(rq->tag < 0);
blk_mq_put_driver_tag(rq);
}
/*
* After populating an empty queue, kick it to avoid stall. Read
* the comment in flush_end_io().
*/
spin_lock_irqsave(&fq->mq_flush_lock, flags);
blk_flush_complete_seq(rq, fq, REQ_FSEQ_DATA, error);
spin_unlock_irqrestore(&fq->mq_flush_lock, flags);
blk_mq_sched_restart(hctx);
}
/**
* blk_insert_flush - insert a new PREFLUSH/FUA request
* @rq: request to insert
*
* To be called from __elv_add_request() for %ELEVATOR_INSERT_FLUSH insertions.
* or __blk_mq_run_hw_queue() to dispatch request.
* @rq is being submitted. Analyze what needs to be done and put it on the
* right queue.
*/
void blk_insert_flush(struct request *rq)
{
struct request_queue *q = rq->q;
unsigned long fflags = q->queue_flags; /* may change, cache */
unsigned int policy = blk_flush_policy(fflags, rq);
struct blk_flush_queue *fq = blk_get_flush_queue(q, rq->mq_ctx);
/*
* @policy now records what operations need to be done. Adjust
* REQ_PREFLUSH and FUA for the driver.
*/
rq->cmd_flags &= ~REQ_PREFLUSH;
if (!(fflags & (1UL << QUEUE_FLAG_FUA)))
rq->cmd_flags &= ~REQ_FUA;
/*
* REQ_PREFLUSH|REQ_FUA implies REQ_SYNC, so if we clear any
* of those flags, we have to set REQ_SYNC to avoid skewing
* the request accounting.
*/
rq->cmd_flags |= REQ_SYNC;
/*
* An empty flush handed down from a stacking driver may
* translate into nothing if the underlying device does not
* advertise a write-back cache. In this case, simply
* complete the request.
*/
if (!policy) {
blk_mq_end_request(rq, 0);
return;
}
BUG_ON(rq->bio != rq->biotail); /*assumes zero or single bio rq */
/*
* If there's data but flush is not necessary, the request can be
* processed directly without going through flush machinery. Queue
* for normal execution.
*/
if ((policy & REQ_FSEQ_DATA) &&
!(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) {
blk_mq_request_bypass_insert(rq, false);
return;
}
/*
* @rq should go through flush machinery. Mark it part of flush
* sequence and submit for further processing.
*/
memset(&rq->flush, 0, sizeof(rq->flush));
INIT_LIST_HEAD(&rq->flush.list);
rq->rq_flags |= RQF_FLUSH_SEQ;
rq->flush.saved_end_io = rq->end_io; /* Usually NULL */
rq->end_io = mq_flush_data_end_io;
spin_lock_irq(&fq->mq_flush_lock);
blk_flush_complete_seq(rq, fq, REQ_FSEQ_ACTIONS & ~policy, 0);
spin_unlock_irq(&fq->mq_flush_lock);
}
/**
* blkdev_issue_flush - queue a flush
* @bdev: blockdev to issue flush for
* @gfp_mask: memory allocation flags (for bio_alloc)
* @error_sector: error sector
*
* Description:
* Issue a flush for the block device in question. Caller can supply
* room for storing the error offset in case of a flush error, if they
* wish to.
*/
int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
sector_t *error_sector)
{
struct request_queue *q;
struct bio *bio;
int ret = 0;
if (bdev->bd_disk == NULL)
return -ENXIO;
q = bdev_get_queue(bdev);
if (!q)
return -ENXIO;
/*
* some block devices may not have their queue correctly set up here
* (e.g. loop device without a backing file) and so issuing a flush
* here will panic. Ensure there is a request function before issuing
* the flush.
*/
if (!q->make_request_fn)
return -ENXIO;
bio = bio_alloc(gfp_mask, 0);
bio_set_dev(bio, bdev);
bio->bi_opf = REQ_OP_WRITE | REQ_PREFLUSH;
ret = submit_bio_wait(bio);
/*
* The driver must store the error location in ->bi_sector, if
* it supports it. For non-stacked drivers, this should be
* copied from blk_rq_pos(rq).
*/
if (error_sector)
*error_sector = bio->bi_iter.bi_sector;
bio_put(bio);
return ret;
}
EXPORT_SYMBOL(blkdev_issue_flush);
struct blk_flush_queue *blk_alloc_flush_queue(struct request_queue *q,
int node, int cmd_size, gfp_t flags)
{
struct blk_flush_queue *fq;
int rq_sz = sizeof(struct request);
fq = kzalloc_node(sizeof(*fq), flags, node);
if (!fq)
goto fail;
spin_lock_init(&fq->mq_flush_lock);
rq_sz = round_up(rq_sz + cmd_size, cache_line_size());
fq->flush_rq = kzalloc_node(rq_sz, flags, node);
if (!fq->flush_rq)
goto fail_rq;
INIT_LIST_HEAD(&fq->flush_queue[0]);
INIT_LIST_HEAD(&fq->flush_queue[1]);
INIT_LIST_HEAD(&fq->flush_data_in_flight);
return fq;
fail_rq:
kfree(fq);
fail:
return NULL;
}
void blk_free_flush_queue(struct blk_flush_queue *fq)
{
/* bio based request queue hasn't flush queue */
if (!fq)
return;
kfree(fq->flush_rq);
kfree(fq);
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...