Revision 879d68a445dd7073a8c022fcdd21dc27eca7f192 authored by Ryan Press on 26 March 2013, 23:32:31 UTC, committed by Jason Cooper on 28 March 2013, 17:29:23 UTC
The previous configuration used the wrong "clk" pin. Without this change mv_sdio worked because the bootloader would set the pin up, but with a bootloader that does not set the pin, mv_sdio fails to detect any card. I have tested this change using a mwifiex_sdio wireless network adapter over the SDIO interface. Signed-off-by: Ryan Press <ryan@presslab.us> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
1 parent e0656a9
| File | Mode | Size |
|---|---|---|
| Makefile | -rw-r--r-- | 383 bytes |
| generic_mpih-add1.c | -rw-r--r-- | 2.0 KB |
| generic_mpih-lshift.c | -rw-r--r-- | 2.1 KB |
| generic_mpih-mul1.c | -rw-r--r-- | 1.9 KB |
| generic_mpih-mul2.c | -rw-r--r-- | 1.9 KB |
| generic_mpih-mul3.c | -rw-r--r-- | 1.9 KB |
| generic_mpih-rshift.c | -rw-r--r-- | 2.1 KB |
| generic_mpih-sub1.c | -rw-r--r-- | 2.0 KB |
| longlong.h | -rw-r--r-- | 39.5 KB |
| mpi-bit.c | -rw-r--r-- | 1.5 KB |
| mpi-cmp.c | -rw-r--r-- | 1.7 KB |
| mpi-inline.h | -rw-r--r-- | 3.3 KB |
| mpi-internal.h | -rw-r--r-- | 7.8 KB |
| mpi-pow.c | -rw-r--r-- | 8.3 KB |
| mpicoder.c | -rw-r--r-- | 6.2 KB |
| mpih-cmp.c | -rw-r--r-- | 2.0 KB |
| mpih-div.c | -rw-r--r-- | 5.8 KB |
| mpih-mul.c | -rw-r--r-- | 14.2 KB |
| mpiutil.c | -rw-r--r-- | 2.6 KB |
Computing file changes ...
