87e24f4 | Peter Zijlstra | 05 March 2012, 22:59:25 UTC | perf/x86: Fix local vs remote memory events for NHM/WSM Verified using the below proglet.. before: [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0 remote write Performance counter stats for './numa 0': 2,101,554 node-stores 2,096,931 node-store-misses 5.021546079 seconds time elapsed [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1 local write Performance counter stats for './numa 1': 501,137 node-stores 199 node-store-misses 5.124451068 seconds time elapsed After: [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0 remote write Performance counter stats for './numa 0': 2,107,516 node-stores 2,097,187 node-store-misses 5.012755149 seconds time elapsed [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1 local write Performance counter stats for './numa 1': 2,063,355 node-stores 165 node-store-misses 5.082091494 seconds time elapsed #define _GNU_SOURCE #include <sched.h> #include <stdio.h> #include <errno.h> #include <sys/mman.h> #include <sys/types.h> #include <dirent.h> #include <signal.h> #include <unistd.h> #include <numaif.h> #include <stdlib.h> #define SIZE (32*1024*1024) volatile int done; void sig_done(int sig) { done = 1; } int main(int argc, char **argv) { cpu_set_t *mask, *mask2; size_t size; int i, err, t; int nrcpus = 1024; char *mem; unsigned long nodemask = 0x01; /* node 0 */ DIR *node; struct dirent *de; int read = 0; int local = 0; if (argc < 2) { printf("usage: %s [0-3]\n", argv[0]); printf(" bit0 - local/remote\n"); printf(" bit1 - read/write\n"); exit(0); } switch (atoi(argv[1])) { case 0: printf("remote write\n"); break; case 1: printf("local write\n"); local = 1; break; case 2: printf("remote read\n"); read = 1; break; case 3: printf("local read\n"); local = 1; read = 1; break; } mask = CPU_ALLOC(nrcpus); size = CPU_ALLOC_SIZE(nrcpus); CPU_ZERO_S(size, mask); node = opendir("/sys/devices/system/node/node0/"); if (!node) perror("opendir"); while ((de = readdir(node))) { int cpu; if (sscanf(de->d_name, "cpu%d", &cpu) == 1) CPU_SET_S(cpu, size, mask); } closedir(node); mask2 = CPU_ALLOC(nrcpus); CPU_ZERO_S(size, mask2); for (i = 0; i < size; i++) CPU_SET_S(i, size, mask2); CPU_XOR_S(size, mask2, mask2, mask); // invert if (!local) mask = mask2; err = sched_setaffinity(0, size, mask); if (err) perror("sched_setaffinity"); mem = mmap(0, SIZE, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); err = mbind(mem, SIZE, MPOL_BIND, &nodemask, 8*sizeof(nodemask), MPOL_MF_MOVE); if (err) perror("mbind"); signal(SIGALRM, sig_done); alarm(5); if (!read) { while (!done) { for (i = 0; i < SIZE; i++) mem[i] = 0x01; } } else { while (!done) { for (i = 0; i < SIZE; i++) t += *(volatile char *)(mem + i); } } return 0; } Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/n/tip-tq73sxus35xmqpojf7ootxgs@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu> | 12 March 2012, 19:43:41 UTC |
fde7d90 | Linus Torvalds | 10 March 2012, 21:49:52 UTC | Linux 3.3-rc7 | 10 March 2012, 21:49:52 UTC |
c7b2855 | Al Viro | 08 March 2012, 17:51:19 UTC | aio: fix the "too late munmap()" race Current code has put_ioctx() called asynchronously from aio_fput_routine(); that's done *after* we have killed the request that used to pin ioctx, so there's nothing to stop io_destroy() waiting in wait_for_all_aios() from progressing. As the result, we can end up with async call of put_ioctx() being the last one and possibly happening during exit_mmap() or elf_core_dump(), neither of which expects stray munmap() being done to them... We do need to prevent _freeing_ ioctx until aio_fput_routine() is done with that, but that's all we care about - neither io_destroy() nor exit_aio() will progress past wait_for_all_aios() until aio_fput_routine() does really_put_req(), so the ioctx teardown won't be done until then and we don't care about the contents of ioctx past that point. Since actual freeing of these suckers is RCU-delayed, we don't need to bump ioctx refcount when request goes into list for async removal. All we need is rcu_read_lock held just over the ->ctx_lock-protected area in aio_fput_routine(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Benjamin LaHaise <bcrl@kvack.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 10 March 2012, 02:59:59 UTC |
86b62a2 | Al Viro | 07 March 2012, 05:16:35 UTC | aio: fix io_setup/io_destroy race Have ioctx_alloc() return an extra reference, so that caller would drop it on success and not bother with re-grabbing it on failure exit. The current code is obviously broken - io_destroy() from another thread that managed to guess the address io_setup() would've returned would free ioctx right under us; gets especially interesting if aio_context_t * we pass to io_setup() points to PROT_READ mapping, so put_user() fails and we end up doing io_destroy() on kioctx another thread has just got freed... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 10 March 2012, 02:59:59 UTC |
86e0600 | Linus Torvalds | 10 March 2012, 02:09:18 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs updates from Chris Mason: "I have two additional and btrfs fixes in my for-linus branch. One is a casting error that leads to memory corruption on i386 during scrub, and the other fixes a corner case in the backref walking code (also triggered by scrub)." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix casting error in scrub reada code btrfs: fix locking issues in find_parent_nodes() | 10 March 2012, 02:09:18 UTC |
be22aec | Hugh Dickins | 09 March 2012, 21:37:32 UTC | memcg: revert fix to mapcount check for this release Respectfully revert commit e6ca7b89dc76 "memcg: fix mapcount check in move charge code for anonymous page" for the 3.3 release, so that it behaves exactly like releases 2.6.35 through 3.2 in this respect. Horiguchi-san's commit is correct in itself, 1 makes much more sense than 2 in that check; but it does not go far enough - swapcount should be considered too - if we really want such a check at all. We appear to have reached agreement now, and expect that 3.4 will remove the mapcount check, but had better not make 3.3 different. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 March 2012, 23:32:20 UTC |
a7f4255 | Thomas Gleixner | 09 March 2012, 19:55:10 UTC | x86: Derandom delay_tsc for 64 bit Commit f0fbf0abc093 ("x86: integrate delay functions") converted delay_tsc() into a random delay generator for 64 bit. The reason is that it merged the mostly identical versions of delay_32.c and delay_64.c. Though the subtle difference of the result was: static void delay_tsc(unsigned long loops) { - unsigned bclock, now; + unsigned long bclock, now; Now the function uses rdtscl() which returns the lower 32bit of the TSC. On 32bit that's not problematic as unsigned long is 32bit. On 64 bit this fails when the lower 32bit are close to wrap around when bclock is read, because the following check if ((now - bclock) >= loops) break; evaluated to true on 64bit for e.g. bclock = 0xffffffff and now = 0 because the unsigned long (now - bclock) of these values results in 0xffffffff00000001 which is definitely larger than the loops value. That explains Tvortkos observation: "Because I am seeing udelay(500) (_occasionally_) being short, and that by delaying for some duration between 0us (yep) and 491us." Make those variables explicitely u32 again, so this works for both 32 and 64 bit. Reported-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # >= 2.6.27 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 March 2012, 20:43:27 UTC |
c447064 | Linus Torvalds | 09 March 2012, 20:14:23 UTC | Merge tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Nothing exciting here: just a few regression fixes for HD-audio and ASoC, also the support of missing 32bit compat ioctl for HDSPM." * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hdspm - Provide ioctl_compat ALSA: hda/realtek - Apply the coef-setup only to ALC269VB ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3 ASoC: neo1973: fix neo1973 wm8753 initialization | 09 March 2012, 20:14:23 UTC |
8cd5c86 | David Brown | 09 March 2012, 19:39:32 UTC | MAINTAINERS: new git entry for arm/mach-msm The msm git tree moved to git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 March 2012, 20:13:36 UTC |
0ab5d75 | Linus Torvalds | 09 March 2012, 15:27:38 UTC | Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming Pull C6X fix from Mark Salter: "Fix for C6X KSTK_EIP and KSTK_ESP macros." * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: C6X: fix KSTK_EIP and KSTK_ESP macros | 09 March 2012, 15:27:38 UTC |
0cacaf5 | Linus Torvalds | 09 March 2012, 15:26:25 UTC | Merge tag 'iommu-fixes-v3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull two IOMMU fixes from Joerg Roedel: "The first is an additional fix for the OMAP initialization order issue and the second patch fixes a possible section mismatch which can lead to a kernel crash in the AMD IOMMU driver when suspend/resume is used and the compiler has not inlined the iommu_set_device_table function." * tag 'iommu-fixes-v3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: x86/amd: iommu_set_device_table() must not be __init ARM: OMAP: fix iommu, not mailbox | 09 March 2012, 15:26:25 UTC |
45b8da9 | Linus Torvalds | 09 March 2012, 15:23:17 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull radeon drm stuff from Dave Airlie: "Just some radeon fixes, one is for an oops where we run out of ioremap space on some big hardware systems in 32-bit mode, stuff doesn't work properly but at least the machine will boot. One regression fix, and two bugs, one hw, one blit code." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: fix hdmi duallink checks drm/radeon/kms: set SX_MISC in the r6xx blit code (v2) drm/radeon: deal with errors from framebuffer init path. drm/radeon: fix a semaphore deadlock on pre cayman asics | 09 March 2012, 15:23:17 UTC |
e304dfd | Linus Torvalds | 09 March 2012, 15:14:44 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking from David Miller: 1) IPV4 routing metrics can become stale when routes are changed by the administrator, fix from Steffen Klassert. 2) atl1c does "val |= XXX;" where XXX is a bit number not a bit mask, fix by using set_bit. From Dan Carpenter. 3) Memory accounting bug in carl9170 driver results in wedged TX queue. Fix from Nicolas Cavallari. 4) iwlwifi accidently uses "sizeof(ptr)" instead of "sizeof(*ptr)", fix from Johannes Berg. 5) Openvswitch doesn't honor dp_ifindex when doing vport lookups, fix from Ben Pfaff. 6) ehea conversion to 64-bit stats lost multicast and rx_errors accounting, fix from Eric Dumazet. 7) Bridge state transition logging in br_stp_disable_port() is busted, it's emitted at the wrong time and the message is in the wrong tense, fix from Paulius Zaleckas. 8) mlx4 device erroneously invokes the queue resize firmware operation twice, fix from Jack Morgenstein. 9) Fix deadlock in usbnet, need to drop lock when invoking usb_unlink_urb() otherwise we recurse into taking it again. Fix from Sebastian Siewior. 10) hyperv network driver uses the wrong driver name string, fix from Haiyang Zhang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver net/usbnet: avoid recursive locking in usbnet_stop() route: Remove redirect_genid inetpeer: Invalidate the inetpeer tree along with the routing cache mlx4_core: fix bug in modify_cq wrapper for resize flow. atl1c: set ATL1C_WORK_EVENT_RESET bit correctly bridge: fix state reporting when port is disabled bridge: br_log_state() s/entering/entered/ ehea: restore multicast and rx_errors fields openvswitch: Fix checksum update for actions on UDP packets. openvswitch: Honor dp_ifindex, when specified, for vport lookup by name. iwlwifi: fix wowlan suspend mwifiex: reset encryption mode flag before association carl9170: fix frame delivery if sta is in powersave mode carl9170: Fix memory accounting when sta is in power-save mode. | 09 March 2012, 15:14:44 UTC |
9f8050c | Linus Torvalds | 09 March 2012, 01:32:42 UTC | Merge tag 'fixes-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull last minute fixes from Olof Johansson: "One samsung build fix due to a mis-applied patch, and a small set of OMAP fixes. This should be the last from arm-soc for 3.3, hopefully." * tag 'fixes-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: S3C2440: Fixed build error for s3c244x ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688 ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision ARM: OMAP2+: Remove apply_uV constraints for fixed regulator ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts | 09 March 2012, 01:32:42 UTC |
9a0cee7 | Linus Torvalds | 09 March 2012, 01:25:17 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "Another small, clear fix in a specific driver." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps65910: Configure correct value for VDDCTRL vout reg | 09 March 2012, 01:25:17 UTC |
ee0849c | Linus Torvalds | 09 March 2012, 01:24:27 UTC | Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6 Pull minor devicetree bug fixes and documentation updates from Grant Likely: "Fixes up a duplicate #include, adds an empty implementation of of_find_compatible_node() and make git ignore .dtb files. And fix up bus name on OF described PHYs. Nothing exciting here." * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6: doc: dt: Fix broken reference in gpio-leds documentation of/mdio: fix fixed link bus name of/fdt.c: asm/setup.h included twice of: add picochip vendor prefix dt: add empty of_find_compatible_node function ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignore | 09 March 2012, 01:24:27 UTC |
7d77696 | Linus Torvalds | 09 March 2012, 01:23:45 UTC | Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6 Pull SPI section mismatch bug fix for v3.3-rc3 from Grant Likely: "Minor fix for pl022_dma_probe() function which was put in the wrong section." * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: Fix section mismatch in spi-pl022.c | 09 March 2012, 01:23:45 UTC |
42a6c7e | Linus Torvalds | 09 March 2012, 01:22:54 UTC | Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull four hwmon patches from Guenter Roeck * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804 hwmon: (zl6100) Maintain delay parameter in driver instance data hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000 | 09 March 2012, 01:22:54 UTC |
5d0edf2 | Linus Torvalds | 09 March 2012, 01:21:51 UTC | Merge tag 'dm-3.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper fixes for 3.3 from Alasdair Kergon Eight small device-mapper bug fixes. * tag 'dm-3.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm raid: fix flush support dm raid: set MD_CHANGE_DEVS when rebuilding dm thin metadata: decrement counter after removing mapped block dm thin metadata: unlock superblock in init_pmd error path dm thin metadata: remove incorrect close_device on creation error paths dm flakey: fix crash on read when corrupt_bio_byte not set dm io: fix discard support dm ioctl: do not leak argv if target message only contains whitespace | 09 March 2012, 01:21:51 UTC |
d31b20f | Haiyang Zhang | 07 March 2012, 10:02:00 UTC | net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: Olaf Hering <olaf@aepfle.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 21:55:27 UTC |
c66fcfa | Olof Johansson | 08 March 2012, 18:56:12 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688 ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision ARM: OMAP2+: Remove apply_uV constraints for fixed regulator ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts | 08 March 2012, 18:56:12 UTC |
48546cc | Kukjin Kim | 08 March 2012, 09:48:36 UTC | ARM: S3C2440: Fixed build error for s3c244x Fixed following: arch/arm/mach-s3c2440/s3c244x.c: In function 's3c244x_restart': arch/arm/mach-s3c2440/s3c244x.c:209: error: expected declaration or statement at end of input make[1]: *** [arch/arm/mach-s3c24xx/s3c244x.o] Error 1 make: *** [arch/arm/mach-s3c24xx] Error 2 Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net> | 08 March 2012, 16:57:29 UTC |
8de5d6f | Adrian Knoth | 08 March 2012, 14:38:04 UTC | ALSA: hdspm - Provide ioctl_compat snd_hdspm uses its own ioctls to acquire config- and status information. Expose the corresponding ioctl handler via ioctl_compat, so that 32bit applications can use it on 64bit kernels. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 08 March 2012, 14:58:58 UTC |
6b7f000 | Jan Beulich | 08 March 2012, 08:58:13 UTC | x86/amd: iommu_set_device_table() must not be __init This function is called from enable_iommus(), which in turn is used from amd_iommu_resume(). Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> | 08 March 2012, 10:36:06 UTC |
38aa4a5 | Alex Deucher | 08 March 2012, 00:05:01 UTC | drm/radeon/kms: fix hdmi duallink checks All pre-SI chips are limited to 165 Mhz for single link. Code in question will be re-enabled when SI support is added. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44755 https://bugzilla.kernel.org/show_bug.cgi?id=42887 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 08 March 2012, 09:39:54 UTC |
cf00790 | Marek Olšák | 07 March 2012, 22:33:00 UTC | drm/radeon/kms: set SX_MISC in the r6xx blit code (v2) Mesa may set it to 1, causing all primitives to be killed. v2: also update the r7xx code Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 08 March 2012, 09:39:29 UTC |
4231d47 | Sebastian Siewior | 07 March 2012, 10:19:28 UTC | net/usbnet: avoid recursive locking in usbnet_stop() |kernel BUG at kernel/rtmutex.c:724! |[<c029599c>] (rt_spin_lock_slowlock+0x108/0x2bc) from [<c01c2330>] (defer_bh+0x1c/0xb4) |[<c01c2330>] (defer_bh+0x1c/0xb4) from [<c01c3afc>] (rx_complete+0x14c/0x194) |[<c01c3afc>] (rx_complete+0x14c/0x194) from [<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) |[<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) from [<c01e1ff4>] (musb_giveback+0x34/0x40) |[<c01e1ff4>] (musb_giveback+0x34/0x40) from [<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) |[<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) from [<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) |[<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) from [<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) |[<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) from [<c01cbb90>] (unlink1+0xbc/0xcc) |[<c01cbb90>] (unlink1+0xbc/0xcc) from [<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) |[<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) from [<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) |[<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) from [<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) |[<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) from [<c01c2d68>] (usbnet_stop+0x100/0x15c) |[<c01c2d68>] (usbnet_stop+0x100/0x15c) from [<c020f718>] (__dev_close_many+0x94/0xc8) defer_bh() takes the lock which is hold during unlink_urbs(). The safe walk suggest that the skb will be removed from the list and this is done by defer_bh() so it seems to be okay to drop the lock here. Cc: stable@kernel.org Reported-by: AnÃbal Almeida Pinto <anibal.pinto@efacec.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:49:29 UTC |
ac3f48d | Steffen Klassert | 06 March 2012, 21:21:10 UTC | route: Remove redirect_genid As we invalidate the inetpeer tree along with the routing cache now, we don't need a genid to reset the redirect handling when the routing cache is flushed. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:30:32 UTC |
5faa5df | Steffen Klassert | 06 March 2012, 21:20:26 UTC | inetpeer: Invalidate the inetpeer tree along with the routing cache We initialize the routing metrics with the values cached on the inetpeer in rt_init_metrics(). So if we have the metrics cached on the inetpeer, we ignore the user configured fib_metrics. To fix this issue, we replace the old tree with a fresh initialized inet_peer_base. The old tree is removed later with a delayed work queue. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:30:24 UTC |
dcf353b | Jack Morgenstein | 07 March 2012, 05:56:35 UTC | mlx4_core: fix bug in modify_cq wrapper for resize flow. The actual FW command is called in procedure "handle_resize". Code incorrectly invoked the FW command again (in good flow), in the modify_cq wrapper function. Fix by skipping second FW invocation unconditionally for resize. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:28:01 UTC |
7831545 | Dan Carpenter | 07 March 2012, 00:02:04 UTC | atl1c: set ATL1C_WORK_EVENT_RESET bit correctly ATL1C_WORK_EVENT_RESET is zero so the original code here is a nop. The intent was to set the zero bit. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:27:45 UTC |
5200959 | Paulius Zaleckas | 06 March 2012, 22:25:22 UTC | bridge: fix state reporting when port is disabled Now we have: eth0: link *down* br0: port 1(eth0) entered *forwarding* state br_log_state(p) should be called *after* p->state is set to BR_STATE_DISABLED. Reported-by: Zilvinas Valinskas <zilvinas@wilibox.com> Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:25:25 UTC |
d9e179e | Paulius Zaleckas | 06 March 2012, 22:25:14 UTC | bridge: br_log_state() s/entering/entered/ When br_log_state() is reporting state it should say "entered" istead of "entering" since state at this point is already changed. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:25:25 UTC |
09c1d44 | Eric Dumazet | 06 March 2012, 19:46:41 UTC | ehea: restore multicast and rx_errors fields Commit 239c562c94d (ehea: Add 64bit statistics) added a regression, since we no longer report multicast & rx_errors fields, taken from port->stats structure. These fields are updated in ehea_update_stats() every second. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:23:04 UTC |
9259c48 | David S. Miller | 08 March 2012, 06:49:01 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch | 08 March 2012, 06:49:01 UTC |
81e5d41 | Jesse Gross | 06 March 2012, 23:05:46 UTC | openvswitch: Fix checksum update for actions on UDP packets. When modifying IP addresses or ports on a UDP packet we don't correctly follow the rules for unchecksummed packets. This meant that packets without a checksum can be given a incorrect new checksum and packets with a checksum can become marked as being unchecksummed. This fixes it to handle those requirements. Signed-off-by: Jesse Gross <jesse@nicira.com> | 07 March 2012, 22:36:57 UTC |
d47775c | David S. Miller | 07 March 2012, 20:34:42 UTC | Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless | 07 March 2012, 20:34:42 UTC |
c4632ae | Laxman Dewangan | 07 March 2012, 11:09:05 UTC | regulator: tps65910: Configure correct value for VDDCTRL vout reg As per datasheet, the voltage output is defined as from SEL[6:0] = 3 to 64 (dec) Vout= (SEL[6:0] × 12.5 mV + 562.5 mV) The list_voltage returns the vout as 600mV + selector * 12.5mV and so equivalent VSEL is selector + 3. Adding 3 on selector when configuring VSEL register for VDDCTRL output. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 07 March 2012, 19:28:37 UTC |
0ca93de | Jonathan E Brassow | 07 March 2012, 19:09:48 UTC | dm raid: fix flush support Fix dm-raid flush support. Both md and dm have support for flush, but the dm-raid target forgot to set the flag to indicate that flushes should be passed on. (Important for data integrity e.g. with writeback cache enabled.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:48 UTC |
3aa3b2b | Jonathan E Brassow | 07 March 2012, 19:09:47 UTC | dm raid: set MD_CHANGE_DEVS when rebuilding The 'rebuild' parameter is used to rebuild individual devices in an array (e.g. resynchronize a RAID1 device or recalculate a parity device in higher RAID). The MD_CHANGE_DEVS flag must be set when this parameter is given in order to write out the superblocks and make the change take immediate effect. The code that handles new devices in super_load already sets MD_CHANGE_DEVS and 'FirstUse'. (The 'FirstUse' flag was being set as a special case for rebuilds in super_init_validation.) Add a condition for rebuilds in super_load to take care of both flags without the special case in 'super_init_validation'. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:47 UTC |
af63bcb | Joe Thornber | 07 March 2012, 19:09:44 UTC | dm thin metadata: decrement counter after removing mapped block Correct the number of mapped sectors shown on a thin device's status line by decrementing td->mapped_blocks in __remove() each time a block is removed. Signed-off-by: Joe Thornber <ejt@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:44 UTC |
4469a5f | Joe Thornber | 07 March 2012, 19:09:43 UTC | dm thin metadata: unlock superblock in init_pmd error path If dm_sm_disk_create() fails the superblock must be unlocked. Signed-off-by: Joe Thornber <ejt@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:43 UTC |
1f3db25 | Mike Snitzer | 07 March 2012, 19:09:41 UTC | dm thin metadata: remove incorrect close_device on creation error paths The __open_device() error paths in __create_thin() and __create_snap() incorrectly call __close_device() even if td was not initialized by __open_device(). Remove this. Also document __open_device() return values, remove a redundant td->changed = 1 in __create_thin(), and insert an additional safeguard against creating an already-existing device. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:41 UTC |
1212268 | Mike Snitzer | 07 March 2012, 19:09:39 UTC | dm flakey: fix crash on read when corrupt_bio_byte not set The following BUG is hit on the first read that is submitted to a dm flakey test device while the device is "down" if the corrupt_bio_byte feature wasn't requested when the device's table was loaded. Example DM table that will hit this BUG: 0 2097152 flakey 8:0 2048 0 30 This bug was introduced by commit a3998799fb4df0b0af8271a7d50c4269032397aa (dm flakey: add corrupt_bio_byte feature) in v3.1-rc1. BUG: unable to handle kernel paging request at ffff8801cfce3fff IP: [<ffffffffa008c233>] corrupt_bio_data+0x6e/0xae [dm_flakey] PGD 1606063 PUD 0 Oops: 0002 [#1] SMP ... Call Trace: <IRQ> [<ffffffffa008c2b5>] flakey_end_io+0x42/0x48 [dm_flakey] [<ffffffffa00dca98>] clone_endio+0x54/0xb6 [dm_mod] [<ffffffff81130587>] bio_endio+0x2d/0x2f [<ffffffff811c819a>] req_bio_endio+0x96/0x9f [<ffffffff811c94b9>] blk_update_request+0x1dc/0x3a9 [<ffffffff812f5ee2>] ? rcu_read_unlock+0x21/0x23 [<ffffffff811c96a6>] blk_update_bidi_request+0x20/0x6e [<ffffffff811c9713>] blk_end_bidi_request+0x1f/0x5d [<ffffffff811c978d>] blk_end_request+0x10/0x12 [<ffffffff8128f450>] scsi_io_completion+0x1e5/0x4b1 [<ffffffff812882a9>] scsi_finish_command+0xec/0xf5 [<ffffffff8128f830>] scsi_softirq_done+0xff/0x108 [<ffffffff811ce284>] blk_done_softirq+0x84/0x98 [<ffffffff81048d19>] __do_softirq+0xe3/0x1d5 [<ffffffff8138f83f>] ? _raw_spin_lock+0x62/0x69 [<ffffffff810997cf>] ? handle_irq_event+0x4c/0x61 [<ffffffff8139833c>] call_softirq+0x1c/0x30 [<ffffffff81003b37>] do_softirq+0x4b/0xa3 [<ffffffff81048a39>] irq_exit+0x53/0xca [<ffffffff81398acd>] do_IRQ+0x9d/0xb4 [<ffffffff81390333>] common_interrupt+0x73/0x73 ... Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.1+ Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:39 UTC |
0c535e0 | Milan Broz | 07 March 2012, 19:09:37 UTC | dm io: fix discard support This patch fixes a crash by recognising discards in dm_io. Currently dm_mirror can send REQ_DISCARD bios if running over a discard-enabled device and without support in dm_io the system crashes badly. BUG: unable to handle kernel paging request at 00800000 IP: __bio_add_page.part.17+0xf5/0x1e0 ... bio_add_page+0x56/0x70 dispatch_io+0x1cf/0x240 [dm_mod] ? km_get_page+0x50/0x50 [dm_mod] ? vm_next_page+0x20/0x20 [dm_mod] ? mirror_flush+0x130/0x130 [dm_mirror] dm_io+0xdc/0x2b0 [dm_mod] ... Introduced in 2.6.38-rc1 by commit 5fc2ffeabb9ee0fc0e71ff16b49f34f0ed3d05b4 (dm raid1: support discard). Signed-off-by: Milan Broz <mbroz@redhat.com> Cc: stable@kernel.org Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:37 UTC |
902c6a9 | Jesper Juhl | 07 March 2012, 19:09:34 UTC | dm ioctl: do not leak argv if target message only contains whitespace If 'argc' is zero we jump to the 'out:' label, but this leaks the (unused) memory that 'dm_split_args()' allocated for 'argv' if the string being split consisted entirely of whitespace. Jump to the 'out_argv:' label instead to free up that memory. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:34 UTC |
1bd612a | Guenter Roeck | 05 March 2012, 19:13:52 UTC | hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804 Also update IDT datasheet locations. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare <khali@linux-fr.org> | 07 March 2012, 17:48:44 UTC |
7ad6307 | Guenter Roeck | 07 March 2012, 11:58:55 UTC | hwmon: (zl6100) Maintain delay parameter in driver instance data A global delay parameter has the side effect of being overwritten with 0 if a single ZL2004 or ZL6105 is instantiated. If other chips supported by the same driver are in the system, this will result in access errors for those chips. To solve the problem, keep a per-instance copy of the delay parameter, and do not change the original parameter. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.1+ Acked-by: Jean Delvare <khali@linux-fr.org> | 07 March 2012, 17:48:43 UTC |
7cb3c44 | Guenter Roeck | 04 March 2012, 16:10:57 UTC | hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes There are up to three POUT alarm attributes, not two, since cap_alarm was added. Reported-by: Michele Petracca <mi.petracca@gmail.com> Cc: stable@vger.kernel.org # 3.0+ [3.0 will need backport] Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 07 March 2012, 17:48:42 UTC |
4de8612 | Jean Delvare | 05 March 2012, 13:32:00 UTC | hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000 These are fully compatible with Jedec JC 42.4 as far as I can see. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> | 07 March 2012, 17:48:21 UTC |
4f262ac | Linus Torvalds | 07 March 2012, 16:33:03 UTC | Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm Pull ARM updates from Russell King. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7358/1: perf: add PMU hotplug notifier ARM: 7357/1: perf: fix overflow handling for xscale2 PMUs ARM: 7356/1: perf: check that we have an event in the PMU IRQ handlers ARM: 7355/1: perf: clear overflow flag when disabling counter on ARMv7 PMU ARM: 7354/1: perf: limit sample_period to half max_period in non-sampling mode ARM: ecard: ensure fake vma vm_flags is setup ARM: 7346/1: errata: fix PL310 erratum #753970 workaround selection ARM: 7345/1: errata: update workaround for A9 erratum #743622 ARM: 7348/1: arm/spear600: fix one-shot timer ARM: 7339/1: amba/serial.h: Include types.h for resolving dependency of type bool | 07 March 2012, 16:33:03 UTC |
d09b3c9 | Linus Torvalds | 07 March 2012, 16:31:31 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just a few driver fixups, nothing exciting." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - fix 3rd-gen Bamboo MT when 4+ fingers are in use Input: twl4030-vibra - use proper guard for PM methods Input: evdev - fix variable initialisation Input: wacom - add missing LEDS_CLASS to Kconfig Input: ALPS - fix touchpad detection when buttons are pressed | 07 March 2012, 16:31:31 UTC |
4cd7c0a | Mark Salter | 07 March 2012, 16:19:31 UTC | C6X: fix KSTK_EIP and KSTK_ESP macros There was a latent typo in the C6X KSTK_EIP and KSTK_ESP macros which caused a problem with a new patch which used them. The broken definitions were of the form: #define KSTK_FOO(tsk) (task_pt_regs(task)->foo) Note the use of task vs tsk. This actually worked before because the only place in the kernel which used these macros passed in a local pointer named task. Signed-off-by: Mark Salter <msalter@redhat.com> | 07 March 2012, 16:28:22 UTC |
4293f20 | Linus Torvalds | 07 March 2012, 16:21:19 UTC | Revert "CPU hotplug, cpusets, suspend: Don't touch cpusets during suspend/resume" This reverts commit 8f2f748b0656257153bcf0941df8d6060acc5ca6. It causes some odd regression that we have not figured out, and it's too late in the -rc series to try to figure it out now. As reported by Konstantin Khlebnikov, it causes consistent hangs on his laptop (Thinkpad x220: 2x cores + HT). They can be avoided by adding calls to "rebuild_sched_domains();" in cpuset_cpu_[in]active() for the CPU_{ONLINE/DOWN_FAILED/DOWN_PREPARE}_FROZEN cases, but it's not at all clear why, and it makes no sense. Konstantin's config doesn't even have CONFIG_CPUSETS enabled, just to make things even more interesting. So it's not the cpusets, it's just the scheduling domains. So until this is understood, revert. Bisected-reported-and-tested-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 07 March 2012, 16:21:19 UTC |
aaefcd4 | Dave Airlie | 06 March 2012, 10:44:40 UTC | drm/radeon: deal with errors from framebuffer init path. We've been getting occasional oops running a 32-bit kernel on a certain system in our RHEL test hw. It appears that we fail to get sufficent ioremap space for the framebuffer, and this leads to an oops. This patch should fix the oops and leave a message in the logs we can check for. A future fix would probably to resize the console to a size that we can ioremap. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 07 March 2012, 14:07:40 UTC |
0be7043 | Christian König | 07 March 2012, 10:28:57 UTC | drm/radeon: fix a semaphore deadlock on pre cayman asics The out of order execution of semaphore commands on pre cayman asics doesn't work correctly and can cause deadlocks, so turn it off for now. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 07 March 2012, 14:07:29 UTC |
a0feb6d | Lorenzo Pieralisi | 06 March 2012, 16:37:45 UTC | ARM: 7358/1: perf: add PMU hotplug notifier When a CPU is taken out of reset, either cold booted or hotplugged in, some of its PMU registers can contain UNKNOWN values. This patch adds a hotplug notifier to ARM core perf code so that upon CPU restart the PMU unit is reset and becomes ready to use again. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 07 March 2012, 09:40:50 UTC |
3f31ae1 | Will Deacon | 06 March 2012, 16:35:55 UTC | ARM: 7357/1: perf: fix overflow handling for xscale2 PMUs xscale2 PMUs indicate overflow not via the PMU control register, but by a separate overflow FLAG register instead. This patch fixes the xscale2 PMU code to use this register to detect to overflow and ensures that we clear any pending overflow when disabling a counter. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 07 March 2012, 09:40:49 UTC |
f6f5a30 | Will Deacon | 06 March 2012, 16:34:50 UTC | ARM: 7356/1: perf: check that we have an event in the PMU IRQ handlers The PMU IRQ handlers in perf assume that if a counter has overflowed then perf must be responsible. In the paranoid world of crazy hardware, this could be false, so check that we do have a valid event before attempting to dereference NULL in the interrupt path. Cc: <stable@vger.kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 07 March 2012, 09:40:49 UTC |
99c1745 | Will Deacon | 06 March 2012, 16:34:22 UTC | ARM: 7355/1: perf: clear overflow flag when disabling counter on ARMv7 PMU When disabling a counter on an ARMv7 PMU, we should also clear the overflow flag in case an overflow occurred whilst stopping the counter. This prevents a spurious overflow being picked up later and leading to either false accounting or a NULL dereference. Cc: <stable@vger.kernel.org> Reported-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 07 March 2012, 09:40:49 UTC |
5727347 | Will Deacon | 06 March 2012, 16:33:17 UTC | ARM: 7354/1: perf: limit sample_period to half max_period in non-sampling mode On ARM, the PMU does not stop counting after an overflow and therefore IRQ latency affects the new counter value read by the kernel. This is significant for non-sampling runs where it is possible for the new value to overtake the previous one, causing the delta to be out by up to max_period events. Commit a737823d ("ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency") attempted to fix this problem by allowing interrupt handlers to pass an overflow flag to the event update function, causing the overflow calculation to assume that the counter passed through zero when going from prev to new. Unfortunately, this doesn't work when overflow occurs on the perf_task_tick path because we have the flag cleared and end up computing a large negative delta. This patch removes the overflow flag from armpmu_event_update and instead limits the sample_period to half of the max_period for non-sampling profiling runs. Cc: <stable@vger.kernel.org> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 07 March 2012, 09:40:48 UTC |
19d57d3 | Jason Gerecke | 06 March 2012, 18:19:19 UTC | Input: wacom - fix 3rd-gen Bamboo MT when 4+ fingers are in use The message count field uses three bits of storage, not two. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 07 March 2012, 08:45:26 UTC |
526af6e | Kailang Yang | 07 March 2012, 07:25:20 UTC | ALSA: hda/realtek - Apply the coef-setup only to ALC269VB The coef setup in alc269_fill_coef() was designed only for ALC269VB model, and this has some bad effects for other ALC269 variants, such as turning off the external mic input. Apply it only to ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 March 2012, 08:03:29 UTC |
dac12d1 | Linus Torvalds | 07 March 2012, 06:31:08 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) TCP can chop up SACK'd SKBs below below the unacked send sequence and that breaks lots of stuff. Fix from Neal Cardwell. 2) There is code in ipv6 to properly join and leave the all-routers multicast code when the forwarding setting is changed, but once forwarding is turned on, we don't do the join for newly registered devices. Fix from Li Wei. 3) Netfilter's NAT module autoload in ctnetlink drops a spinlock around a sleeping call, problem is this code path doesn't actually hold that lock. Fix from Pablo Neira Ayuso. 4) TG3 uses the wrong interfaces to hook into the new byte queue limit support. It uses the device level interfaces, which is fine for single queue devices, but on more recent chips this driver supports multiqueue so we have to use the multiqueue BQL APIs. Fix from Tom Herbert. 5) r8169 resume fix from Francois Romieu. 6) Add some cxgb4 device IDs, from Vipul Pandya. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: IPv6: Fix not join all-router mcast group when forwarding set. caif-hsi: Set default MTU to 4096 cxgb4vf: Add support for Chelsio's T480-CR and T440-LP-CR adapters cxgb4: Add support for Chelsio's T480-CR and T440-LP-CR adapters mlx4_core: remove buggy sched_queue masking netfilter: nf_conntrack: fix early_drop with reliable event delivery bridge: netfilter: don't call iptables on vlan packets if sysctl is off netfilter: bridge: fix wrong pointer dereference netfilter: ctnetlink: remove incorrect spin_[un]lock_bh on NAT module autoload netfilter: ebtables: fix wrong name length while copying to user-space r8169: runtime resume before shutdown. tcp: fix tcp_shift_skb_data() to not shift SACKed data below snd_una tg3: Fix to use multi queue BQL interfaces | 07 March 2012, 06:31:08 UTC |
55062d0 | Linus Torvalds | 07 March 2012, 02:48:13 UTC | x86: fix typo in recent find_vma_prev purge It turns out that test-compiling this file on x86-64 doesn't really help, because much of it is x86-32-specific. And so I hadn't noticed the slightly over-eager removal of the 'r' from 'addr' variable despite thinking I had tested it. Signed-off-by: Linus "oopsie" Torvalds <torvalds@linux-foundation.org> | 07 March 2012, 02:48:13 UTC |
097d591 | Linus Torvalds | 07 March 2012, 02:23:36 UTC | vm: avoid using find_vma_prev() unnecessarily Several users of "find_vma_prev()" were not in fact interested in the previous vma if there was no primary vma to be found either. And in those cases, we're much better off just using the regular "find_vma()", and then "prev" can be looked up by just checking vma->vm_prev. The find_vma_prev() semantics are fairly subtle (see Mikulas' recent commit 83cd904d271b: "mm: fix find_vma_prev"), and the whole "return prev by reference" means that it generates worse code too. Thus this "let's avoid using this inconvenient and clearly too subtle interface when we don't really have to" patch. Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 07 March 2012, 02:23:36 UTC |
71fece9 | Linus Torvalds | 07 March 2012, 00:55:50 UTC | Merge git://git.samba.org/sfrench/cifs-2.6 Pull CIFS fixes from Steve French * git://git.samba.org/sfrench/cifs-2.6: cifs: fix dentry refcount leak when opening a FIFO on lookup CIFS: Fix mkdir/rmdir bug for the non-POSIX case | 07 March 2012, 00:55:50 UTC |
83cd904 | Mikulas Patocka | 05 March 2012, 00:52:03 UTC | mm: fix find_vma_prev Commit 6bd4837de96e ("mm: simplify find_vma_prev()") broke memory management on PA-RISC. After application of the patch, programs that allocate big arrays on the stack crash with segfault, for example, this will crash if compiled without optimization: int main() { char array[200000]; array[199999] = 0; return 0; } The reason is that PA-RISC has up-growing stack and the stack is usually the last memory area. In the above example, a page fault happens above the stack. Previously, if we passed too high address to find_vma_prev, it returned NULL and stored the last VMA in *pprev. After "simplify find_vma_prev" change, it stores NULL in *pprev. Consequently, the stack area is not found and it is not expanded, as it used to be before the change. This patch restores the old behavior and makes it return the last VMA in *pprev if the requested address is higher than address of any other VMA. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 07 March 2012, 00:48:03 UTC |
52abb70 | Thomas Gleixner | 06 March 2012, 22:18:54 UTC | genirq: Clear action->thread_mask if IRQ_ONESHOT is not set Xommit ac5637611(genirq: Unmask oneshot irqs when thread was not woken) fails to unmask when a !IRQ_ONESHOT threaded handler is handled by handle_level_irq. This happens because thread_mask is or'ed unconditionally in irq_wake_thread(), but for !IRQ_ONESHOT interrupts never cleared. So the check for !desc->thread_active fails and keeps the interrupt disabled. Keep the thread_mask zero for !IRQ_ONESHOT interrupts. Document the thread_mask magic while at it. Reported-and-tested-by: Sven Joachim <svenjoac@gmx.de> Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 07 March 2012, 00:46:39 UTC |
651a68e | Ben Pfaff | 06 March 2012, 23:04:04 UTC | openvswitch: Honor dp_ifindex, when specified, for vport lookup by name. When OVS_VPORT_ATTR_NAME is specified and dp_ifindex is nonzero, the logical behavior would be for the vport name lookup scope to be limited to the specified datapath, but in fact the dp_ifindex value was ignored. This commit causes the search scope to be honored. Signed-off-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> | 06 March 2012, 23:04:04 UTC |
d6ddef9 | Li Wei | 05 March 2012, 14:45:17 UTC | IPv6: Fix not join all-router mcast group when forwarding set. When forwarding was set and a new net device is register, we need add this device to the all-router mcast group. Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 March 2012, 21:58:47 UTC |
ce8fea7 | Hugh Dickins | 06 March 2012, 20:28:52 UTC | mmap: EINVAL not ENOMEM when rejecting VM_GROWS Currently error is -ENOMEM when rejecting VM_GROWSDOWN|VM_GROWSUP from shared anonymous: hoist the file case's -EINVAL up for both. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 06 March 2012, 21:49:08 UTC |
34efc28 | Sjur Brændeland | 04 March 2012, 08:38:58 UTC | caif-hsi: Set default MTU to 4096 Default MTU for CAIF HSI was wrongly set to 15 * 4092 bytes. The patch sets default MTU size to 4096. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 March 2012, 21:27:45 UTC |
79421b4 | Vipul Pandya | 05 March 2012, 22:56:37 UTC | cxgb4vf: Add support for Chelsio's T480-CR and T440-LP-CR adapters This patch adds PCI device ids for Chelsio's T480-CR and T440-LP-CR adapters. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 March 2012, 21:21:17 UTC |
f637d57 | Vipul Pandya | 05 March 2012, 22:56:36 UTC | cxgb4: Add support for Chelsio's T480-CR and T440-LP-CR adapters This patch adds PCI device ids for Chelsio's T480-CR and T440-LP-CR adapters. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 March 2012, 21:21:17 UTC |
1d4526e | Yevgeny Petrilin | 06 March 2012, 03:05:14 UTC | mlx4_core: remove buggy sched_queue masking Fixes a bug introduced by commit fe9a2603c, where the priority bits in the schedule queue field were masked out. Signed-off-by: Amir Vadai <amirv@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 March 2012, 19:43:50 UTC |
7413851 | Pablo Neira Ayuso | 06 March 2012, 01:22:55 UTC | netfilter: nf_conntrack: fix early_drop with reliable event delivery If reliable event delivery is enabled and ctnetlink fails to deliver the destroy event in early_drop, the conntrack subsystem cannot drop any the candidate flow that was planned to be evicted. Reported-by: Kerin Millar <kerframil@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 March 2012, 19:43:50 UTC |
739e450 | Florian Westphal | 06 March 2012, 01:22:54 UTC | bridge: netfilter: don't call iptables on vlan packets if sysctl is off When net.bridge.bridge-nf-filter-vlan-tagged is 0 (default), vlan packets arriving should not be sent to ip(6)tables by bridge netfilter. However, it turns out that we currently always send VLAN packets to netfilter, if .. a), CONFIG_VLAN_8021Q is enabled ; or b), CONFIG_VLAN_8021Q is not set but rx vlan offload is enabled on the bridge port. This is because bridge netfilter treats skb with skb->protocol == ETH_P_IP{V6} as "non-vlan packet". With rx vlan offload on or CONFIG_VLAN_8021Q=y, the vlan header has already been removed here, and we cannot rely on skb->protocol alone. Fix this by only using skb->protocol if the skb has no vlan tag, or if a vlan tag is present and filter-vlan-tagged bridge netfilter sysctl is enabled. We cannot remove the skb->protocol == htons(ETH_P_8021Q) test because the vlan tag is still around in the CONFIG_VLAN_8021Q=n && "ethtool -K $itf rxvlan off" case. reproducer: iptables -t raw -I PREROUTING -i br0 iptables -t raw -I PREROUTING -i br0.1 Then send packets to an ip address configured on br0.1 interface. Even with net.bridge.bridge-nf-filter-vlan-tagged=0, the 1st rule will match instead of the 2nd one. With this patch applied, the 2nd rule will match instead. In the non-local address case, netfilter won't be consulted after this patch unless the sysctl is switched on. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 March 2012, 19:43:49 UTC |
a157b9d | Pablo Neira Ayuso | 06 March 2012, 01:22:53 UTC | netfilter: bridge: fix wrong pointer dereference In adf7ff8, a invalid dereference was added in ebt_make_names. CC [M] net/bridge/netfilter/ebtables.o net/bridge/netfilter/ebtables.c: In function `ebt_make_names': net/bridge/netfilter/ebtables.c:1371:20: warning: `t' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 March 2012, 19:43:49 UTC |
8be619d | Pablo Neira Ayuso | 06 March 2012, 01:22:51 UTC | netfilter: ctnetlink: remove incorrect spin_[un]lock_bh on NAT module autoload Since 7d367e0, ctnetlink_new_conntrack is called without holding the nf_conntrack_lock spinlock. Thus, ctnetlink_parse_nat_setup does not require to release that spinlock anymore in the NAT module autoload case. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 March 2012, 19:43:49 UTC |
848edc6 | Santosh Nayak | 06 March 2012, 01:22:50 UTC | netfilter: ebtables: fix wrong name length while copying to user-space user-space ebtables expects 32 bytes-long names, but xt_match names use 29 bytes. We have to copy less 29 bytes and then, make sure we fill the remaining bytes with zeroes. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 March 2012, 19:43:49 UTC |
2a15cd2 | françois romieu | 06 March 2012, 01:14:12 UTC | r8169: runtime resume before shutdown. With runtime PM, if the ethernet cable is disconnected, the device is transitioned to D3 state to conserve energy. If the system is shutdown in this state, any register accesses in rtl_shutdown are dropped on the floor. As the device was programmed by .runtime_suspend() to wake on link changes, it is thus brought back up as soon as the link recovers. Resuming every suspended device through the driver core would slow things down and it is not clear how many devices really need it now. Original report and D0 transition patch by Sameer Nanda. Patch has been changed to comply with advices by Rafael J. Wysocki and the PM folks. Reported-by: Sameer Nanda <snanda@chromium.org> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Hayes Wang <hayeswang@realtek.com> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 March 2012, 19:43:49 UTC |
4648dc9 | Neal Cardwell | 05 March 2012, 19:35:04 UTC | tcp: fix tcp_shift_skb_data() to not shift SACKed data below snd_una This commit fixes tcp_shift_skb_data() so that it does not shift SACKed data below snd_una. This fixes an issue whose symptoms exactly match reports showing tp->sacked_out going negative since 3.3.0-rc4 (see "WARNING: at net/ipv4/tcp_input.c:3418" thread on netdev). Since 2008 (832d11c5cd076abc0aa1eaf7be96c81d1a59ce41) tcp_shift_skb_data() had been shifting SACKed ranges that were below snd_una. It checked that the *end* of the skb it was about to shift from was above snd_una, but did not check that the end of the actual shifted range was above snd_una; this commit adds that check. Shifting SACKed ranges below snd_una is problematic because for such ranges tcp_sacktag_one() short-circuits: it does not declare anything as SACKed and does not increase sacked_out. Before the fixes in commits cc9a672ee522d4805495b98680f4a3db5d0a0af9 and daef52bab1fd26e24e8e9578f8fb33ba1d0cb412, shifting SACKed ranges below snd_una happened to work because tcp_shifted_skb() was always (incorrectly) passing in to tcp_sacktag_one() an skb whose end_seq tcp_shift_skb_data() had already guaranteed was beyond snd_una. Hence tcp_sacktag_one() never short-circuited and always increased tp->sacked_out in this case. After those two fixes, my testing has verified that shifting SACKed ranges below snd_una could cause tp->sacked_out to go negative with the following sequence of events: (1) tcp_shift_skb_data() sees an skb whose end_seq is beyond snd_una, then shifts a prefix of that skb that is below snd_una (2) tcp_shifted_skb() increments the packet count of the already-SACKed prev sk_buff (3) tcp_sacktag_one() sees the end of the new SACKed range is below snd_una, so it short-circuits and doesn't increase tp->sacked_out (5) tcp_clean_rtx_queue() sees the SACKed skb has been ACKed, decrements tp->sacked_out by this "inflated" pcount that was missing a matching increase in tp->sacked_out, and hence tp->sacked_out underflows to a u32 like 0xFFFFFFFF, which casted to s32 is negative. (6) this leads to the warnings seen in the recent "WARNING: at net/ipv4/tcp_input.c:3418" thread on the netdev list; e.g.: tcp_input.c:3418 WARN_ON((int)tp->sacked_out < 0); More generally, I think this bug can be tickled in some cases where two or more ACKs from the receiver are lost and then a DSACK arrives that is immediately above an existing SACKed skb in the write queue. This fix changes tcp_shift_skb_data() to abort this sequence at step (1) in the scenario above by noticing that the bytes are below snd_una and not shifting them. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 March 2012, 19:43:49 UTC |
7f466cf | John W. Linville | 06 March 2012, 19:16:48 UTC | Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem | 06 March 2012, 19:16:48 UTC |
917ec63 | Linus Torvalds | 06 March 2012, 17:10:31 UTC | Merge tag 'fixes-3.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc bug fixes from Arnd Bergmann: "Here are all the fixes I got after sending the last pull request. These fix mostly regressions on exynos, at91, pxa and ep93xx. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" * tag 'fixes-3.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ep93xx: convert vision_ep9307 to MULTI_IRQ_HANDLER ARM: EXYNOS: fix touchscreen IRQ setup on Universal C210 board ARM: pxa: fix invalid mfp pin issue ARM: pxa: remove duplicated registeration on pxa-gpio ARM: pxa: add dummy clock for pxa25x and pxa27x ARM: S3C24XX: DMA resume regression fix ARM: S3C24XX: Fix restart on S3C2442 ARM: SAMSUNG: Fix memory size for hsotg ARM: at91/dma: DMA controller registering with DT support ARM: at91/dma: remove platform data from DMA controller | 06 March 2012, 17:10:31 UTC |
4704fe6 | Linus Torvalds | 06 March 2012, 16:24:15 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 regression fix from Martin Schwidefsky: "It is a fix for a regression that has been introduced with git commit 25f269f17316 - "[S390] qdio: EQBS retry after CCQ 96" - and if possible we would like to have working code for the fcp data router in 3.3." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] qdio: fix handler function arguments for zfcp data router | 06 March 2012, 16:24:15 UTC |
1de9d14 | Linus Torvalds | 06 March 2012, 16:23:30 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A simple fix that's obvious from inspection. There's no mainline users of this driver yet (there's some i.MX platforms which will use it)." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix mask parameter in da9052_reg_update calls | 06 March 2012, 16:23:30 UTC |
5756b76 | Jan Beulich | 05 March 2012, 16:49:24 UTC | vsprintf: make %pV handling compatible with kasprintf() kasprintf() (and potentially other functions that I didn't run across so far) want to evaluate argument lists twice. Caring to do so for the primary list is obviously their job, but they can't reasonably be expected to check the format string for instances of %pV, which however need special handling too: On architectures like x86-64 (as opposed to e.g. ix86), using the same argument list twice doesn't produce the expected results, as an internally managed cursor gets updated during the first run. Fix the problem by always acting on a copy of the original list when handling %pV. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 06 March 2012, 16:22:26 UTC |
c09ff08 | Hugh Dickins | 06 March 2012, 04:52:55 UTC | page_cgroup: fix horrid swap accounting regression Why is memcg's swap accounting so broken? Insane counts, wrong ownership, unfreeable structures, which later get freed and then accessed after free. Turns out to be a tiny a little 3.3-rc1 regression in 9fb4b7cc0724 "page_cgroup: add helper function to get swap_cgroup": the helper function (actually named lookup_swap_cgroup()) returns an address using void* arithmetic, but the structure in question is a short. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Bob Liu <lliubbo@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 06 March 2012, 16:18:23 UTC |
6b60805 | Arnd Bergmann | 06 March 2012, 16:12:13 UTC | Merge branch 'fixes' of git://github.com/hzhuang1/linux into fixes * 'fixes' of git://github.com/hzhuang1/linux: (3 commits) ARM: pxa: fix invalid mfp pin issue ARM: pxa: remove duplicated registeration on pxa-gpio ARM: pxa: add dummy clock for pxa25x and pxa27x Includes an update to v3.3-rc6 | 06 March 2012, 16:12:26 UTC |
4c75aab | Arnd Bergmann | 06 March 2012, 16:11:56 UTC | Merge branch 'v3.3-samsung-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.3-samsung-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: fix touchscreen IRQ setup on Universal C210 board ARM: S3C24XX: DMA resume regression fix ARM: S3C24XX: Fix restart on S3C2442 ARM: SAMSUNG: Fix memory size for hsotg | 06 March 2012, 16:11:56 UTC |
1dbd02e | H Hartley Sweeten | 02 March 2012, 00:13:59 UTC | ARM: ep93xx: convert vision_ep9307 to MULTI_IRQ_HANDLER As done for the other ep93xx machines in: commit 9a6879bd902e2ec605fff4d9fb3247b440a1f66a ARM: ep93xx: convert to MULTI_IRQ_HANDLER Now that there is a generic IRQ handler for multiple VIC devices use it for vision_ep9307 to help building multi platform kernels. Signed-off-by: Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 06 March 2012, 15:57:56 UTC |
63f32b3 | Bartlomiej Zolnierkiewicz | 06 March 2012, 10:25:15 UTC | ARM: EXYNOS: fix touchscreen IRQ setup on Universal C210 board Fixes atmel_mxt_ts freeze on Universal C210. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 06 March 2012, 10:25:15 UTC |
8f23921 | Marton Balint | 05 March 2012, 20:33:23 UTC | ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3 My CD input got lost in commit 68ef0561efe494143516df38c03a16b837b8e79c. Raymond helped me to add the necessary pin fixup to make it appear again. In fact, this is basically his patch. It fixes alsa bug #5541. Signed-off-by: Marton Balint <cus@passwd.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 06 March 2012, 09:44:01 UTC |
af82931 | Haojian Zhuang | 06 March 2012, 06:57:16 UTC | ARM: pxa: fix invalid mfp pin issue Failure is reported on hx4700 with kernel v3.3-rc1. __mfp_validate: GPIO20 is invalid pin __mfp_validate: GPIO21 is invalid pin __mfp_validate: GPIO15 is invalid pin __mfp_validate: GPIO78 is invalid pin __mfp_validate: GPIO79 is invalid pin __mfp_validate: GPIO80 is invalid pin __mfp_validate: GPIO33 is invalid pin __mfp_validate: GPIO48 is invalid pin __mfp_validate: GPIO49 is invalid pin __mfp_validate: GPIO50 is invalid pin Since pxa_last_gpio is used in mfp-pxa2xx driver. But it's only updated in pxa-gpio driver that run after mfp-pxa2xx driver. So update the pxa_last_gpio first in mfp-pxa2xx driver. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> | 06 March 2012, 06:57:16 UTC |
0c7de34 | Haojian Zhuang | 06 March 2012, 06:37:04 UTC | ARM: pxa: remove duplicated registeration on pxa-gpio Both reboot (via reboot(RB_AUTOBOOT)) and suspend freeze on hx4700. Registration of pxa_gpio_syscore_ops is moved into pxa-gpio driver, but it still exists in arch-pxa directory. It resulsts failure on reboot and suspend. Now remove the registration code in arch-pxa. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> | 06 March 2012, 06:40:59 UTC |
bbdc818 | Haojian Zhuang | 28 February 2012, 02:57:48 UTC | ARM: pxa: add dummy clock for pxa25x and pxa27x gpio-pxa driver is shared among arch-pxa and arch-mmp. Clock is the essential component on pxa3xx/pxa95x and arch-mmp. So we need to define dummy clock in pxa25x/pxa27x instead. This regression was introduced by the commit "ARM: pxa: add dummy clock for sa1100-rtc", id a55b5adaf403c4d032e0871ad4ee3367782f4db6. Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> | 06 March 2012, 06:24:59 UTC |
5cb917b | Tom Herbert | 05 March 2012, 19:53:50 UTC | tg3: Fix to use multi queue BQL interfaces Fix tg3 to use BQL multi queue related netdev interfaces since the device supports multi queue. Signed-off-by: Tom Herbert <therbert@google.com> Reported-by: Christoph Lameter <cl@gentwo.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 March 2012, 06:19:08 UTC |
f3969bf | Linus Torvalds | 06 March 2012, 00:23:12 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "It contains three cherry-picked fixes from perf/core, which turned out to be more urgent than we originally thought." * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Handle kernels that don't support attr.exclude_{guest,host} perf tools: Change perf_guest default back to false perf record: No build id option fails | 06 March 2012, 00:23:12 UTC |
98e990a | Linus Torvalds | 06 March 2012, 00:10:44 UTC | Merge tag 'usb-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb USB: revert a powerpc EHCI patch There is just one patch in here, a revert of a powerpc EHCI driver patch that was reported to cause problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'usb-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "powerpc/usb: fix issue of CPU halt when missing USB PHY clock" | 06 March 2012, 00:10:44 UTC |