Revision 88663a6815cb411b0c81e6c28e7f1c7643659c30 authored by Yong He on 06 October 2022, 22:16:45 UTC, committed by GitHub on 06 October 2022, 22:16:45 UTC
* Add syntax for multi-level break. * Fix. * Fix. Co-authored-by: Yong He <yhe@nvidia.com>
1 parent 50a6906
slang-serialize.cpp
// slang-serialize.cpp
#include "slang-serialize.h"
#include "slang-ast-base.h"
namespace Slang {
const SerialClass* SerialClasses::add(const SerialClass* cls)
{
List<const SerialClass*>& classes = m_classesByTypeKind[Index(cls->typeKind)];
if (cls->subType >= classes.getCount())
{
classes.setCount(cls->subType + 1);
}
else
{
if (classes[cls->subType])
{
SLANG_ASSERT(!"Type is already set");
return nullptr;
}
}
SerialClass* copy = _createSerialClass(cls);
classes[cls->subType] = copy;
return copy;
}
const SerialClass* SerialClasses::add(SerialTypeKind kind, SerialSubType subType, const SerialField* fields, Index fieldsCount, const SerialClass* superCls)
{
SerialClass cls;
cls.typeKind = kind;
cls.subType = subType;
cls.fields = fields;
cls.fieldsCount = fieldsCount;
// If the superCls is set it must be owned
SLANG_ASSERT(superCls == nullptr || isOwned(superCls));
cls.super = superCls;
// Set to invalid values for now
cls.alignment = 0;
cls.size = 0;
cls.flags = 0;
return add(&cls);
}
const SerialClass* SerialClasses::addUnserialized(SerialTypeKind kind, SerialSubType subType)
{
List<const SerialClass*>& classes = m_classesByTypeKind[Index(kind)];
if (subType >= classes.getCount())
{
classes.setCount(subType + 1);
}
else
{
if (classes[subType])
{
SLANG_ASSERT(!"Type is already set");
return nullptr;
}
}
SerialClass* dst = m_arena.allocate<SerialClass>();
dst->typeKind = kind;
dst->subType = subType;
dst->size = 0;
dst->alignment = 0;
dst->fields = nullptr;
dst->fieldsCount = 0;
dst->flags = SerialClassFlag::DontSerialize;
dst->super = nullptr;
classes[subType] = dst;
return dst;
}
bool SerialClasses::isOwned(const SerialClass* cls) const
{
const List<const SerialClass*>& classes = m_classesByTypeKind[Index(cls->typeKind)];
return cls->subType < classes.getCount() && classes[cls->subType] == cls;
}
SerialClass* SerialClasses::_createSerialClass(const SerialClass* cls)
{
uint32_t maxAlignment = 1;
uint32_t offset = 0;
if (cls->super)
{
SLANG_ASSERT(isOwned(cls->super));
maxAlignment = cls->super->alignment;
offset = cls->super->size;
}
// Can't be 0
SLANG_ASSERT(maxAlignment != 0);
// Must be a power of 2
SLANG_ASSERT((maxAlignment & (maxAlignment - 1)) == 0);
// Check it is correctly aligned
SLANG_ASSERT((offset & (maxAlignment - 1)) == 0);
SerialField* dstFields = m_arena.allocateArray<SerialField>(cls->fieldsCount);
// Okay, go through fields setting their offset
const SerialField* srcFields = cls->fields;
for (Index j = 0; j < cls->fieldsCount; j++)
{
const SerialField& srcField = srcFields[j];
SerialField& dstField = dstFields[j];
// Copy the field
dstField = srcField;
uint32_t alignment = srcField.type->serialAlignment;
// Make sure the offset is aligned for the field requirement
offset = (offset + alignment - 1) & ~(alignment - 1);
// Save the field offset
dstField.serialOffset = uint32_t(offset);
// Move past the field
offset += uint32_t(srcField.type->serialSizeInBytes);
// Calc the maximum alignment
maxAlignment = (alignment > maxAlignment) ? alignment : maxAlignment;
}
// Align with maximum alignment
offset = (offset + maxAlignment - 1) & ~(maxAlignment - 1);
SerialClass* dst = m_arena.allocate<SerialClass>();
*dst = *cls;
dst->alignment = uint8_t(maxAlignment);
dst->size = uint32_t(offset);
dst->fields = dstFields;
return dst;
}
bool SerialClasses::isOk() const
{
StringSlicePool pool(StringSlicePool::Style::Default);
for (const auto& classes : m_classesByTypeKind)
{
for (const SerialClass* cls : classes)
{
// It is possible potentially to have gaps
if (cls == nullptr)
{
continue;
}
if (cls->super && cls->super->typeKind != cls->typeKind)
{
// If has a super type, must be the same typeKind
return false;
}
// Make sure the fields are uniquely named
pool.clear();
{
const SerialClass* curCls = cls;
do
{
for (Index i = 0; i < curCls->fieldsCount; ++i)
{
const SerialField& field = curCls->fields[i];
StringSlicePool::Handle handle;
if (pool.findOrAdd(UnownedStringSlice(field.name), handle))
{
return false;
}
}
// Add the fields of the parent
curCls = curCls->super;
}
while (curCls);
}
}
}
return true;
}
SerialClasses::SerialClasses():
m_arena(2048)
{
}
// !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SerialWriter !!!!!!!!!!!!!!!!!!!!!!!!!!!!
SerialWriter::SerialWriter(SerialClasses* classes, SerialFilter* filter) :
m_arena(2048),
m_classes(classes),
m_filter(filter)
{
// 0 is always the null pointer
m_entries.add(nullptr);
m_ptrMap.Add(nullptr, 0);
}
SerialIndex SerialWriter::writeObject(const SerialClass* serialCls, const void* ptr)
{
if (serialCls->flags & SerialClassFlag::DontSerialize)
{
return SerialIndex(0);
}
// This pointer cannot be in the map
SLANG_ASSERT(m_ptrMap.TryGetValue(ptr) == nullptr);
typedef SerialInfo::ObjectEntry ObjectEntry;
ObjectEntry* nodeEntry = (ObjectEntry*)m_arena.allocateAligned(sizeof(ObjectEntry) + serialCls->size, SerialInfo::MAX_ALIGNMENT);
nodeEntry->typeKind = serialCls->typeKind;
nodeEntry->subType = serialCls->subType;
nodeEntry->info = SerialInfo::makeEntryInfo(serialCls->alignment);
// We add before adding fields, so if the fields point to this, the entry will be set
auto index = _add(ptr, nodeEntry);
// Point to start of payload
uint8_t* serialPayload = (uint8_t*)(nodeEntry + 1);
while (serialCls)
{
for (Index i = 0; i < serialCls->fieldsCount; ++i)
{
auto field = serialCls->fields[i];
// Work out the offsets
auto srcField = ((const uint8_t*)ptr) + field.nativeOffset;
auto dstField = serialPayload + field.serialOffset;
field.type->toSerialFunc(this, srcField, dstField);
}
// Get the super class
serialCls = serialCls->super;
}
return index;
}
SerialIndex SerialWriter::writeObject(const NodeBase* node)
{
const SerialClass* serialClass = m_classes->getSerialClass(SerialTypeKind::NodeBase, SerialSubType(node->astNodeType));
return writeObject(serialClass, (const void*)node);
}
SerialIndex SerialWriter::writeObject(const RefObject* obj)
{
const SerialRefObject* serialObj = as<const SerialRefObject>(obj);
if (!serialObj)
{
SLANG_ASSERT(!"Unhandled type");
return SerialIndex(0);
}
const ReflectClassInfo* classInfo = serialObj->getClassInfo();
SLANG_ASSERT(classInfo);
const SerialClass* serialClass = m_classes->getSerialClass(SerialTypeKind::RefObject, SerialSubType(classInfo->m_classId));
return writeObject(serialClass, (const void*)obj);
}
void SerialWriter::setPointerIndex(const NodeBase* ptr, SerialIndex index)
{
m_ptrMap.Add(ptr, Index(index));
}
void SerialWriter::setPointerIndex(const RefObject* ptr, SerialIndex index)
{
m_ptrMap.Add(ptr, Index(index));
}
SerialIndex SerialWriter::addPointer(const NodeBase* node)
{
// Null is always 0
if (node == nullptr)
{
return SerialIndex(0);
}
// Look up in the map
Index* indexPtr = m_ptrMap.TryGetValue(node);
if (indexPtr)
{
return SerialIndex(*indexPtr);
}
if (m_filter)
{
return m_filter->writePointer(this, node);
}
else
{
return writeObject(node);
}
}
SerialIndex SerialWriter::addPointer(const RefObject* obj)
{
// Null is always 0
if (obj == nullptr)
{
return SerialIndex(0);
}
// Look up in the map
Index* indexPtr = m_ptrMap.TryGetValue(obj);
if (indexPtr)
{
return SerialIndex(*indexPtr);
}
// TODO(JS):
// Arguably the lookup for these types should be done the same way as arbitrary RefObject types
// and have a enum for them, such we can use a switch instead of all this casting
if (auto stringRep = dynamicCast<StringRepresentation>(obj))
{
SerialIndex index = addString(StringRepresentation::asSlice(stringRep));
m_ptrMap.Add(obj, Index(index));
return index;
}
else if (auto name = dynamicCast<const Name>(obj))
{
return addName(name);
}
if (m_filter)
{
return m_filter->writePointer(this, obj);
}
else
{
return writeObject(obj);
}
}
SerialIndex SerialWriter::_addStringSlice(SerialTypeKind typeKind, SliceMap& sliceMap, const UnownedStringSlice& slice)
{
typedef ByteEncodeUtil Util;
typedef SerialInfo::StringEntry StringEntry;
if (slice.getLength() == 0)
{
return SerialIndex(0);
}
Index* indexPtr = sliceMap.TryGetValue(slice);
if (indexPtr)
{
return SerialIndex(*indexPtr);
}
// Okay we need to add the string
uint8_t encodeBuf[Util::kMaxLiteEncodeUInt32];
const int encodeCount = Util::encodeLiteUInt32(uint32_t(slice.getLength()), encodeBuf);
StringEntry* entry = (StringEntry*)m_arena.allocateUnaligned(SLANG_OFFSET_OF(StringEntry, sizeAndChars) + encodeCount + slice.getLength());
entry->info = SerialInfo::EntryInfo::Alignment1;
entry->typeKind = typeKind;
uint8_t* dst = (uint8_t*)(entry->sizeAndChars);
for (int i = 0; i < encodeCount; ++i)
{
dst[i] = encodeBuf[i];
}
memcpy(dst + encodeCount, slice.begin(), slice.getLength());
// Make a key that will stay in scope -> it's actually just stored in the arena.
// NOTE! without terminating 0
UnownedStringSlice keySlice(((const char*)dst) + encodeCount, slice.getLength());
Index newIndex = m_entries.getCount();
sliceMap.Add(keySlice, newIndex);
m_entries.add(entry);
return SerialIndex(newIndex);
}
SerialIndex SerialWriter::addString(const String& in)
{
return addPointer(in.getStringRepresentation());
}
SerialIndex SerialWriter::addName(const Name* name)
{
if (name == nullptr)
{
return SerialIndex(0);
}
// Look it up
Index* indexPtr = m_ptrMap.TryGetValue(name);
if (indexPtr)
{
return SerialIndex(*indexPtr);
}
SerialIndex index = addString(name->text);
m_ptrMap.Add(name, Index(index));
return index;
}
SerialIndex SerialWriter::addSerialArray(size_t elementSize, size_t alignment, const void* elements, Index elementCount)
{
typedef SerialInfo::ArrayEntry Entry;
if (elementCount == 0)
{
return SerialIndex(0);
}
SLANG_ASSERT(alignment >= 1 && alignment <= SerialInfo::MAX_ALIGNMENT);
// We must at a minimum have the alignment for the array prefix info
alignment = (alignment < SLANG_ALIGN_OF(Entry)) ? SLANG_ALIGN_OF(Entry) : alignment;
size_t payloadSize = elementCount * elementSize;
Entry* entry = (Entry*)m_arena.allocateAligned(sizeof(Entry) + payloadSize, alignment);
entry->typeKind = SerialTypeKind::Array;
entry->info = SerialInfo::makeEntryInfo(int(alignment));
entry->elementSize = uint16_t(elementSize);
entry->elementCount = uint32_t(elementCount);
memcpy(entry + 1, elements, payloadSize);
m_entries.add(entry);
return SerialIndex(m_entries.getCount() - 1);
}
static const uint8_t s_fixBuffer[SerialInfo::MAX_ALIGNMENT]{ 0, };
SlangResult SerialWriter::write(Stream* stream)
{
const Int entriesCount = m_entries.getCount();
// Add a sentinal so we don't need special handling for
SerialInfo::Entry sentinal;
sentinal.typeKind = SerialTypeKind::String;
sentinal.info = SerialInfo::EntryInfo::Alignment1;
m_entries.add(&sentinal);
m_entries.removeLast();
SerialInfo::Entry** entries = m_entries.getBuffer();
// Note strictly required in our impl of List. But by writing this and
// knowing that removeLast cannot release memory, means the sentinal must be at the last position.
entries[entriesCount] = &sentinal;
{
size_t offset = 0;
SerialInfo::Entry* entry = entries[1];
// We start on 1, because 0 is nullptr and not used for anything
for (Index i = 1; i < entriesCount; ++i)
{
SerialInfo::Entry* next = entries[i + 1];
// Before writing we need to store the next alignment
const size_t nextAlignment = SerialInfo::getAlignment(next->info);
const size_t alignment = SerialInfo::getAlignment(entry->info);
SLANG_UNUSED(alignment);
entry->info = SerialInfo::combineWithNext(entry->info, next->info);
// Check we are aligned correctly
SLANG_ASSERT((offset & (alignment - 1)) == 0);
// When we write, we need to make sure it take into account the next alignment
const size_t entrySize = entry->calcSize(m_classes);
// Work out the fix for next alignment
size_t nextOffset = offset + entrySize;
nextOffset = (nextOffset + nextAlignment - 1) & ~(nextAlignment - 1);
size_t alignmentFixSize = nextOffset - (offset + entrySize);
// The fix must be less than max alignment. We require it to be less because we aligned each Entry to
// MAX_ALIGNMENT, and so < MAX_ALIGNMENT is the most extra bytes we can write
SLANG_ASSERT( alignmentFixSize < SerialInfo::MAX_ALIGNMENT);
SLANG_RETURN_ON_FAIL(stream->write(entry, entrySize));
// If we needed to fix so that subsequent alignment is right, write out extra bytes here
if (alignmentFixSize)
{
SLANG_RETURN_ON_FAIL(stream->write(s_fixBuffer, alignmentFixSize));
}
// Onto next
offset = nextOffset;
entry = next;
}
}
return SLANG_OK;
}
SlangResult SerialWriter::writeIntoContainer(FourCC fourCc, RiffContainer* container)
{
typedef RiffContainer::Chunk Chunk;
typedef RiffContainer::ScopeChunk ScopeChunk;
{
ScopeChunk scopeData(container, Chunk::Kind::Data, fourCc);
{
// Sentinel so we don't need special handling for end of list
SerialInfo::Entry sentinal;
sentinal.typeKind = SerialTypeKind::String;
sentinal.info = SerialInfo::EntryInfo::Alignment1;
size_t offset = 0;
const Int entriesCount = m_entries.getCount();
{
m_entries.add(&sentinal);
m_entries.removeLast();
// Note strictly required in our impl of List. But by writing this and
// knowing that removeLast cannot release memory, means the sentinal must be at the last position.
m_entries.getBuffer()[entriesCount] = &sentinal;
}
SerialInfo::Entry*const* entries = m_entries.getBuffer();
SerialInfo::Entry* entry = entries[1];
// We start on 1, because 0 is nullptr and not used for anything
for (Index i = 1; i < entriesCount; ++i)
{
SerialInfo::Entry* next = entries[i + 1];
// Before writing we need to store the next alignment
const size_t nextAlignment = SerialInfo::getAlignment(next->info);
const size_t alignment = SerialInfo::getAlignment(entry->info);
SLANG_UNUSED(alignment);
entry->info = SerialInfo::combineWithNext(entry->info, next->info);
// Check we are aligned correctly
SLANG_ASSERT((offset & (alignment - 1)) == 0);
// When we write, we need to make sure it take into account the next alignment
const size_t entrySize = entry->calcSize(m_classes);
// Work out the fix for next alignment
size_t nextOffset = offset + entrySize;
nextOffset = (nextOffset + nextAlignment - 1) & ~(nextAlignment - 1);
size_t alignmentFixSize = nextOffset - (offset + entrySize);
// The fix must be less than max alignment. We require it to be less because we aligned each Entry to
// MAX_ALIGNMENT, and so < MAX_ALIGNMENT is the most extra bytes we can write
SLANG_ASSERT(alignmentFixSize < SerialInfo::MAX_ALIGNMENT);
container->write(entry, entrySize);
if (alignmentFixSize)
{
container->write(s_fixBuffer, alignmentFixSize);
}
// Onto next
offset = nextOffset;
entry = next;
}
}
}
return SLANG_OK;
}
// !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SerialInfo::Entry !!!!!!!!!!!!!!!!!!!!!!!!
size_t SerialInfo::Entry::calcSize(SerialClasses* serialClasses) const
{
switch (typeKind)
{
case SerialTypeKind::ImportSymbol:
case SerialTypeKind::String:
{
auto entry = static_cast<const StringEntry*>(this);
const uint8_t* cur = (const uint8_t*)entry->sizeAndChars;
uint32_t charsSize;
int sizeSize = ByteEncodeUtil::decodeLiteUInt32(cur, &charsSize);
return SLANG_OFFSET_OF(StringEntry, sizeAndChars) + sizeSize + charsSize;
}
case SerialTypeKind::Array:
{
auto entry = static_cast<const ArrayEntry*>(this);
return sizeof(ArrayEntry) + entry->elementSize * entry->elementCount;
}
case SerialTypeKind::RefObject:
case SerialTypeKind::NodeBase:
{
auto entry = static_cast<const ObjectEntry*>(this);
auto serialClass = serialClasses->getSerialClass(typeKind, entry->subType);
// Align by the alignment of the entry
size_t alignment = getAlignment(entry->info);
size_t size = sizeof(ObjectEntry) + serialClass->size;
size = size + (alignment - 1) & ~(alignment - 1);
return size;
}
default: break;
}
SLANG_ASSERT(!"Unknown type");
return 0;
}
// !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SerialReader !!!!!!!!!!!!!!!!!!!!!!!!!!!!
SerialReader::~SerialReader()
{
for (const RefObject* obj : m_scope)
{
const_cast<RefObject*>(obj)->releaseReference();
}
}
const void* SerialReader::getArray(SerialIndex index, Index& outCount)
{
if (index == SerialIndex(0))
{
outCount = 0;
return nullptr;
}
SLANG_ASSERT(SerialIndexRaw(index) < SerialIndexRaw(m_entries.getCount()));
const Entry* entry = m_entries[Index(index)];
switch (entry->typeKind)
{
case SerialTypeKind::Array:
{
auto arrayEntry = static_cast<const SerialInfo::ArrayEntry*>(entry);
outCount = Index(arrayEntry->elementCount);
return (arrayEntry + 1);
}
default: break;
}
SLANG_ASSERT(!"Not an array");
outCount = 0;
return nullptr;
}
SerialPointer SerialReader::getPointer(SerialIndex index)
{
if (index == SerialIndex(0))
{
return SerialPointer();
}
SLANG_ASSERT(SerialIndexRaw(index) < SerialIndexRaw(m_entries.getCount()));
const Entry* entry = m_entries[Index(index)];
const SerialPointer& ptr = m_objects[Index(index)];
switch (entry->typeKind)
{
case SerialTypeKind::String:
{
// Hmm. Tricky -> we don't know if will be cast as Name or String. Lets assume string.
String string = getString(index);
return SerialPointer(string.getStringRepresentation());
}
case SerialTypeKind::ImportSymbol:
{
if (ptr.m_kind == SerialTypeKind::Unknown)
{
// TODO(JS):
// Could have an error here, because import symbol was not set
// For now just return nullptr
return SerialPointer();
}
break;
}
default: break;
}
return ptr;
}
String SerialReader::getString(SerialIndex index)
{
if (index == SerialIndex(0))
{
return String();
}
SLANG_ASSERT(SerialIndexRaw(index) < SerialIndexRaw(m_entries.getCount()));
const Entry* entry = m_entries[Index(index)];
// It has to be a string type
if (entry->typeKind != SerialTypeKind::String)
{
SLANG_ASSERT(!"Not a string");
return String();
}
RefObject* obj = m_objects[Index(index)].dynamicCast<RefObject>();
if (obj)
{
StringRepresentation* stringRep = dynamicCast<StringRepresentation>(obj);
if (stringRep)
{
return String(stringRep);
}
// Must be a name then
Name* name = dynamicCast<Name>(obj);
SLANG_ASSERT(name);
return name->text;
}
// Okay we need to construct as a string
UnownedStringSlice slice = getStringSlice(index);
StringRepresentation* stringRep = nullptr;
const Index length = slice.getLength();
if (length)
{
stringRep = StringRepresentation::createWithCapacityAndLength(length, length);
memcpy(stringRep->getData(), slice.begin(), length * sizeof(char));
addScope(stringRep);
}
m_objects[Index(index)] = stringRep;
return String(stringRep);
}
Name* SerialReader::getName(SerialIndex index)
{
if (index == SerialIndex(0))
{
return nullptr;
}
SLANG_ASSERT(SerialIndexRaw(index) < SerialIndexRaw(m_entries.getCount()));
const Entry* entry = m_entries[Index(index)];
// It has to be a string type
if (entry->typeKind != SerialTypeKind::String)
{
SLANG_ASSERT(!"Not a string");
return nullptr;
}
RefObject* obj = m_objects[Index(index)].dynamicCast<RefObject>();
if (obj)
{
Name* name = dynamicCast<Name>(obj);
if (name)
{
return name;
}
// Can only be a string then
StringRepresentation* stringRep = dynamicCast<StringRepresentation>(obj);
SLANG_ASSERT(stringRep);
// I don't need to scope, as scoped in NamePool
name = m_namePool->getName(String(stringRep));
// Store as name, as can always access the inner string if needed
m_objects[Index(index)] = name;
return name;
}
UnownedStringSlice slice = getStringSlice(index);
String string(slice);
Name* name = m_namePool->getName(string);
// Don't need to add to scope, because scoped on the pool
m_objects[Index(index)] = name;
return name;
}
UnownedStringSlice SerialReader::getStringSlice(SerialIndex index)
{
SLANG_ASSERT(SerialIndexRaw(index) < SerialIndexRaw(m_entries.getCount()));
const Entry* entry = m_entries[Index(index)];
// It has to be a string type
if (entry->typeKind == SerialTypeKind::String ||
entry->typeKind == SerialTypeKind::ImportSymbol)
{
auto stringEntry = static_cast<const SerialInfo::StringEntry*>(entry);
const uint8_t* src = (const uint8_t*)stringEntry->sizeAndChars;
// Decode the string
uint32_t size;
int sizeSize = ByteEncodeUtil::decodeLiteUInt32(src, &size);
return UnownedStringSlice((const char*)src + sizeSize, size);
}
// Can't be accessed as a slice
SLANG_ASSERT(!"Not accessible as a slice");
return UnownedStringSlice();
}
/* static */SlangResult SerialReader::loadEntries(const uint8_t* data, size_t dataCount, SerialClasses* serialClasses, List<const Entry*>& outEntries)
{
// Check the input data is at least aligned to the max alignment (otherwise everything cannot be aligned correctly)
SLANG_ASSERT((size_t(data) & (SerialInfo::MAX_ALIGNMENT - 1)) == 0);
outEntries.setCount(1);
outEntries[0] = nullptr;
const uint8_t*const end = data + dataCount;
const uint8_t* cur = data;
while (cur < end)
{
const Entry* entry = (const Entry*)cur;
outEntries.add(entry);
const size_t entrySize = entry->calcSize(serialClasses);
cur += entrySize;
// Need to get the next alignment
const size_t nextAlignment = SerialInfo::getNextAlignment(entry->info);
// Need to fix cur with the alignment
cur = (const uint8_t*)((size_t(cur) + nextAlignment - 1) & ~(nextAlignment - 1));
}
return SLANG_OK;
}
SlangResult SerialReader::constructObjects(NamePool* namePool)
{
m_namePool = namePool;
m_objects.clearAndDeallocate();
m_objects.setCount(m_entries.getCount());
memset(m_objects.getBuffer(), 0, m_objects.getCount() * sizeof(void*));
// Go through entries, constructing objects.
for (Index i = 1; i < m_entries.getCount(); ++i)
{
const Entry* entry = m_entries[i];
switch (entry->typeKind)
{
case SerialTypeKind::ImportSymbol:
{
// We don't construct any object for an imported symbol.
// It will be the responsibility of external code to interpet the symbols and *set* the appopriate
// objects prior to a call to `deserializeObjects`
break;
}
case SerialTypeKind::String:
{
// Don't need to construct an object. This is probably a StringRepresentation, or a Name
// Will evaluate lazily.
break;
}
case SerialTypeKind::RefObject:
case SerialTypeKind::NodeBase:
{
auto objectEntry = static_cast<const SerialInfo::ObjectEntry*>(entry);
void* obj = m_objectFactory->create(objectEntry->typeKind, objectEntry->subType);
if (!obj)
{
return SLANG_FAIL;
}
m_objects[i].set(entry->typeKind, obj);
break;
}
case SerialTypeKind::Array:
{
// Don't need to construct an object, as will be accessed an interpreted by the object that holds it
break;
}
}
}
return SLANG_OK;
}
SlangResult SerialReader::deserializeObjects()
{
// Deserialize
for (Index i = 1; i < m_entries.getCount(); ++i)
{
const Entry* entry = m_entries[i];
// First see if there is anything to construct
SerialPointer& dstPtr = m_objects[i];
if (!dstPtr)
{
continue;
}
switch (entry->typeKind)
{
case SerialTypeKind::NodeBase:
case SerialTypeKind::RefObject:
{
auto objectEntry = static_cast<const SerialInfo::ObjectEntry*>(entry);
auto serialClass = m_classes->getSerialClass(objectEntry->typeKind, objectEntry->subType);
if (!serialClass)
{
return SLANG_FAIL;
}
const uint8_t* src = (const uint8_t*)(objectEntry + 1);
uint8_t* dst = (uint8_t*)dstPtr.m_ptr;
// It must be constructed
SLANG_ASSERT(dst);
while (serialClass)
{
for (Index j = 0; j < serialClass->fieldsCount; ++j)
{
auto field = serialClass->fields[j];
auto fieldType = field.type;
fieldType->toNativeFunc(this, src + field.serialOffset, dst + field.nativeOffset);
}
// Get the super class
serialClass = serialClass->super;
}
break;
}
default: break;
}
}
return SLANG_OK;
}
SlangResult SerialReader::load(const uint8_t* data, size_t dataCount, NamePool* namePool)
{
// Load and place entries into entries table
SLANG_RETURN_ON_FAIL(loadEntries(data, dataCount));
// Construct all of the objects
SLANG_RETURN_ON_FAIL(constructObjects(namePool));
SLANG_RETURN_ON_FAIL(deserializeObjects());
return SLANG_OK;
}
} // namespace Slang
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...