Revision 89c38422e072bb453e3045b8f1b962a344c3edea authored by John Garry on 08 November 2018, 10:17:03 UTC, committed by Rob Herring on 08 November 2018, 18:44:34 UTC
Currently the NUMA distance map parsing does not validate the distance
table for the distance-matrix rules 1-2 in [1].

However the arch NUMA code may enforce some of these rules, but not all.
Such is the case for the arm64 port, which does not enforce the rule that
the distance between separates nodes cannot equal LOCAL_DISTANCE.

The patch adds the following rules validation:
- distance of node to self equals LOCAL_DISTANCE
- distance of separate nodes > LOCAL_DISTANCE

This change avoids a yet-unresolved crash reported in [2].

A note on dealing with symmetrical distances between nodes:

Validating symmetrical distances between nodes is difficult. If it were
mandated in the bindings that every distance must be recorded in the
table, then it would be easy. However, it isn't.

In addition to this, it is also possible to record [b, a] distance only
(and not [a, b]). So, when processing the table for [b, a], we cannot
assert that current distance of [a, b] != [b, a] as invalid, as [a, b]
distance may not be present in the table and current distance would be
default at REMOTE_DISTANCE.

As such, we maintain the policy that we overwrite distance [a, b] = [b, a]
for b > a. This policy is different to kernel ACPI SLIT validation, which
allows non-symmetrical distances (ACPI spec SLIT rules allow it). However,
the distance debug message is dropped as it may be misleading (for a distance
which is later overwritten).

Some final notes on semantics:

- It is implied that it is the responsibility of the arch NUMA code to
  reset the NUMA distance map for an error in distance map parsing.

- It is the responsibility of the FW NUMA topology parsing (whether OF or
  ACPI) to enforce NUMA distance rules, and not arch NUMA code.

[1] Documents/devicetree/bindings/numa.txt
[2] https://www.spinics.net/lists/arm-kernel/msg683304.html

Cc: stable@vger.kernel.org # 4.7
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
1 parent 6778be4
Raw File
rcuperf.c
/*
 * Read-Copy Update module-based performance-test facility
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, you can access it online at
 * http://www.gnu.org/licenses/gpl-2.0.html.
 *
 * Copyright (C) IBM Corporation, 2015
 *
 * Authors: Paul E. McKenney <paulmck@us.ibm.com>
 */

#define pr_fmt(fmt) fmt

#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kthread.h>
#include <linux/err.h>
#include <linux/spinlock.h>
#include <linux/smp.h>
#include <linux/rcupdate.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <uapi/linux/sched/types.h>
#include <linux/atomic.h>
#include <linux/bitops.h>
#include <linux/completion.h>
#include <linux/moduleparam.h>
#include <linux/percpu.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/freezer.h>
#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/stat.h>
#include <linux/srcu.h>
#include <linux/slab.h>
#include <asm/byteorder.h>
#include <linux/torture.h>
#include <linux/vmalloc.h>

#include "rcu.h"

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Paul E. McKenney <paulmck@linux.vnet.ibm.com>");

#define PERF_FLAG "-perf:"
#define PERFOUT_STRING(s) \
	pr_alert("%s" PERF_FLAG " %s\n", perf_type, s)
#define VERBOSE_PERFOUT_STRING(s) \
	do { if (verbose) pr_alert("%s" PERF_FLAG " %s\n", perf_type, s); } while (0)
#define VERBOSE_PERFOUT_ERRSTRING(s) \
	do { if (verbose) pr_alert("%s" PERF_FLAG "!!! %s\n", perf_type, s); } while (0)

/*
 * The intended use cases for the nreaders and nwriters module parameters
 * are as follows:
 *
 * 1.	Specify only the nr_cpus kernel boot parameter.  This will
 *	set both nreaders and nwriters to the value specified by
 *	nr_cpus for a mixed reader/writer test.
 *
 * 2.	Specify the nr_cpus kernel boot parameter, but set
 *	rcuperf.nreaders to zero.  This will set nwriters to the
 *	value specified by nr_cpus for an update-only test.
 *
 * 3.	Specify the nr_cpus kernel boot parameter, but set
 *	rcuperf.nwriters to zero.  This will set nreaders to the
 *	value specified by nr_cpus for a read-only test.
 *
 * Various other use cases may of course be specified.
 */

torture_param(bool, gp_async, false, "Use asynchronous GP wait primitives");
torture_param(int, gp_async_max, 1000, "Max # outstanding waits per reader");
torture_param(bool, gp_exp, false, "Use expedited GP wait primitives");
torture_param(int, holdoff, 10, "Holdoff time before test start (s)");
torture_param(int, nreaders, -1, "Number of RCU reader threads");
torture_param(int, nwriters, -1, "Number of RCU updater threads");
torture_param(bool, shutdown, !IS_ENABLED(MODULE),
	      "Shutdown at end of performance tests.");
torture_param(int, verbose, 1, "Enable verbose debugging printk()s");
torture_param(int, writer_holdoff, 0, "Holdoff (us) between GPs, zero to disable");

static char *perf_type = "rcu";
module_param(perf_type, charp, 0444);
MODULE_PARM_DESC(perf_type, "Type of RCU to performance-test (rcu, rcu_bh, ...)");

static int nrealreaders;
static int nrealwriters;
static struct task_struct **writer_tasks;
static struct task_struct **reader_tasks;
static struct task_struct *shutdown_task;

static u64 **writer_durations;
static int *writer_n_durations;
static atomic_t n_rcu_perf_reader_started;
static atomic_t n_rcu_perf_writer_started;
static atomic_t n_rcu_perf_writer_finished;
static wait_queue_head_t shutdown_wq;
static u64 t_rcu_perf_writer_started;
static u64 t_rcu_perf_writer_finished;
static unsigned long b_rcu_perf_writer_started;
static unsigned long b_rcu_perf_writer_finished;
static DEFINE_PER_CPU(atomic_t, n_async_inflight);

static int rcu_perf_writer_state;
#define RTWS_INIT		0
#define RTWS_ASYNC		1
#define RTWS_BARRIER		2
#define RTWS_EXP_SYNC		3
#define RTWS_SYNC		4
#define RTWS_IDLE		5
#define RTWS_STOPPING		6

#define MAX_MEAS 10000
#define MIN_MEAS 100

/*
 * Operations vector for selecting different types of tests.
 */

struct rcu_perf_ops {
	int ptype;
	void (*init)(void);
	void (*cleanup)(void);
	int (*readlock)(void);
	void (*readunlock)(int idx);
	unsigned long (*get_gp_seq)(void);
	unsigned long (*gp_diff)(unsigned long new, unsigned long old);
	unsigned long (*exp_completed)(void);
	void (*async)(struct rcu_head *head, rcu_callback_t func);
	void (*gp_barrier)(void);
	void (*sync)(void);
	void (*exp_sync)(void);
	const char *name;
};

static struct rcu_perf_ops *cur_ops;

/*
 * Definitions for rcu perf testing.
 */

static int rcu_perf_read_lock(void) __acquires(RCU)
{
	rcu_read_lock();
	return 0;
}

static void rcu_perf_read_unlock(int idx) __releases(RCU)
{
	rcu_read_unlock();
}

static unsigned long __maybe_unused rcu_no_completed(void)
{
	return 0;
}

static void rcu_sync_perf_init(void)
{
}

static struct rcu_perf_ops rcu_ops = {
	.ptype		= RCU_FLAVOR,
	.init		= rcu_sync_perf_init,
	.readlock	= rcu_perf_read_lock,
	.readunlock	= rcu_perf_read_unlock,
	.get_gp_seq	= rcu_get_gp_seq,
	.gp_diff	= rcu_seq_diff,
	.exp_completed	= rcu_exp_batches_completed,
	.async		= call_rcu,
	.gp_barrier	= rcu_barrier,
	.sync		= synchronize_rcu,
	.exp_sync	= synchronize_rcu_expedited,
	.name		= "rcu"
};

/*
 * Definitions for rcu_bh perf testing.
 */

static int rcu_bh_perf_read_lock(void) __acquires(RCU_BH)
{
	rcu_read_lock_bh();
	return 0;
}

static void rcu_bh_perf_read_unlock(int idx) __releases(RCU_BH)
{
	rcu_read_unlock_bh();
}

static struct rcu_perf_ops rcu_bh_ops = {
	.ptype		= RCU_BH_FLAVOR,
	.init		= rcu_sync_perf_init,
	.readlock	= rcu_bh_perf_read_lock,
	.readunlock	= rcu_bh_perf_read_unlock,
	.get_gp_seq	= rcu_bh_get_gp_seq,
	.gp_diff	= rcu_seq_diff,
	.exp_completed	= rcu_exp_batches_completed_sched,
	.async		= call_rcu_bh,
	.gp_barrier	= rcu_barrier_bh,
	.sync		= synchronize_rcu_bh,
	.exp_sync	= synchronize_rcu_bh_expedited,
	.name		= "rcu_bh"
};

/*
 * Definitions for srcu perf testing.
 */

DEFINE_STATIC_SRCU(srcu_ctl_perf);
static struct srcu_struct *srcu_ctlp = &srcu_ctl_perf;

static int srcu_perf_read_lock(void) __acquires(srcu_ctlp)
{
	return srcu_read_lock(srcu_ctlp);
}

static void srcu_perf_read_unlock(int idx) __releases(srcu_ctlp)
{
	srcu_read_unlock(srcu_ctlp, idx);
}

static unsigned long srcu_perf_completed(void)
{
	return srcu_batches_completed(srcu_ctlp);
}

static void srcu_call_rcu(struct rcu_head *head, rcu_callback_t func)
{
	call_srcu(srcu_ctlp, head, func);
}

static void srcu_rcu_barrier(void)
{
	srcu_barrier(srcu_ctlp);
}

static void srcu_perf_synchronize(void)
{
	synchronize_srcu(srcu_ctlp);
}

static void srcu_perf_synchronize_expedited(void)
{
	synchronize_srcu_expedited(srcu_ctlp);
}

static struct rcu_perf_ops srcu_ops = {
	.ptype		= SRCU_FLAVOR,
	.init		= rcu_sync_perf_init,
	.readlock	= srcu_perf_read_lock,
	.readunlock	= srcu_perf_read_unlock,
	.get_gp_seq	= srcu_perf_completed,
	.gp_diff	= rcu_seq_diff,
	.exp_completed	= srcu_perf_completed,
	.async		= srcu_call_rcu,
	.gp_barrier	= srcu_rcu_barrier,
	.sync		= srcu_perf_synchronize,
	.exp_sync	= srcu_perf_synchronize_expedited,
	.name		= "srcu"
};

static struct srcu_struct srcud;

static void srcu_sync_perf_init(void)
{
	srcu_ctlp = &srcud;
	init_srcu_struct(srcu_ctlp);
}

static void srcu_sync_perf_cleanup(void)
{
	cleanup_srcu_struct(srcu_ctlp);
}

static struct rcu_perf_ops srcud_ops = {
	.ptype		= SRCU_FLAVOR,
	.init		= srcu_sync_perf_init,
	.cleanup	= srcu_sync_perf_cleanup,
	.readlock	= srcu_perf_read_lock,
	.readunlock	= srcu_perf_read_unlock,
	.get_gp_seq	= srcu_perf_completed,
	.gp_diff	= rcu_seq_diff,
	.exp_completed	= srcu_perf_completed,
	.async		= srcu_call_rcu,
	.gp_barrier	= srcu_rcu_barrier,
	.sync		= srcu_perf_synchronize,
	.exp_sync	= srcu_perf_synchronize_expedited,
	.name		= "srcud"
};

/*
 * Definitions for sched perf testing.
 */

static int sched_perf_read_lock(void)
{
	preempt_disable();
	return 0;
}

static void sched_perf_read_unlock(int idx)
{
	preempt_enable();
}

static struct rcu_perf_ops sched_ops = {
	.ptype		= RCU_SCHED_FLAVOR,
	.init		= rcu_sync_perf_init,
	.readlock	= sched_perf_read_lock,
	.readunlock	= sched_perf_read_unlock,
	.get_gp_seq	= rcu_sched_get_gp_seq,
	.gp_diff	= rcu_seq_diff,
	.exp_completed	= rcu_exp_batches_completed_sched,
	.async		= call_rcu_sched,
	.gp_barrier	= rcu_barrier_sched,
	.sync		= synchronize_sched,
	.exp_sync	= synchronize_sched_expedited,
	.name		= "sched"
};

/*
 * Definitions for RCU-tasks perf testing.
 */

static int tasks_perf_read_lock(void)
{
	return 0;
}

static void tasks_perf_read_unlock(int idx)
{
}

static struct rcu_perf_ops tasks_ops = {
	.ptype		= RCU_TASKS_FLAVOR,
	.init		= rcu_sync_perf_init,
	.readlock	= tasks_perf_read_lock,
	.readunlock	= tasks_perf_read_unlock,
	.get_gp_seq	= rcu_no_completed,
	.gp_diff	= rcu_seq_diff,
	.async		= call_rcu_tasks,
	.gp_barrier	= rcu_barrier_tasks,
	.sync		= synchronize_rcu_tasks,
	.exp_sync	= synchronize_rcu_tasks,
	.name		= "tasks"
};

static unsigned long rcuperf_seq_diff(unsigned long new, unsigned long old)
{
	if (!cur_ops->gp_diff)
		return new - old;
	return cur_ops->gp_diff(new, old);
}

/*
 * If performance tests complete, wait for shutdown to commence.
 */
static void rcu_perf_wait_shutdown(void)
{
	cond_resched_tasks_rcu_qs();
	if (atomic_read(&n_rcu_perf_writer_finished) < nrealwriters)
		return;
	while (!torture_must_stop())
		schedule_timeout_uninterruptible(1);
}

/*
 * RCU perf reader kthread.  Repeatedly does empty RCU read-side
 * critical section, minimizing update-side interference.
 */
static int
rcu_perf_reader(void *arg)
{
	unsigned long flags;
	int idx;
	long me = (long)arg;

	VERBOSE_PERFOUT_STRING("rcu_perf_reader task started");
	set_cpus_allowed_ptr(current, cpumask_of(me % nr_cpu_ids));
	set_user_nice(current, MAX_NICE);
	atomic_inc(&n_rcu_perf_reader_started);

	do {
		local_irq_save(flags);
		idx = cur_ops->readlock();
		cur_ops->readunlock(idx);
		local_irq_restore(flags);
		rcu_perf_wait_shutdown();
	} while (!torture_must_stop());
	torture_kthread_stopping("rcu_perf_reader");
	return 0;
}

/*
 * Callback function for asynchronous grace periods from rcu_perf_writer().
 */
static void rcu_perf_async_cb(struct rcu_head *rhp)
{
	atomic_dec(this_cpu_ptr(&n_async_inflight));
	kfree(rhp);
}

/*
 * RCU perf writer kthread.  Repeatedly does a grace period.
 */
static int
rcu_perf_writer(void *arg)
{
	int i = 0;
	int i_max;
	long me = (long)arg;
	struct rcu_head *rhp = NULL;
	struct sched_param sp;
	bool started = false, done = false, alldone = false;
	u64 t;
	u64 *wdp;
	u64 *wdpp = writer_durations[me];

	VERBOSE_PERFOUT_STRING("rcu_perf_writer task started");
	WARN_ON(!wdpp);
	set_cpus_allowed_ptr(current, cpumask_of(me % nr_cpu_ids));
	sp.sched_priority = 1;
	sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);

	if (holdoff)
		schedule_timeout_uninterruptible(holdoff * HZ);

	t = ktime_get_mono_fast_ns();
	if (atomic_inc_return(&n_rcu_perf_writer_started) >= nrealwriters) {
		t_rcu_perf_writer_started = t;
		if (gp_exp) {
			b_rcu_perf_writer_started =
				cur_ops->exp_completed() / 2;
		} else {
			b_rcu_perf_writer_started = cur_ops->get_gp_seq();
		}
	}

	do {
		if (writer_holdoff)
			udelay(writer_holdoff);
		wdp = &wdpp[i];
		*wdp = ktime_get_mono_fast_ns();
		if (gp_async) {
retry:
			if (!rhp)
				rhp = kmalloc(sizeof(*rhp), GFP_KERNEL);
			if (rhp && atomic_read(this_cpu_ptr(&n_async_inflight)) < gp_async_max) {
				rcu_perf_writer_state = RTWS_ASYNC;
				atomic_inc(this_cpu_ptr(&n_async_inflight));
				cur_ops->async(rhp, rcu_perf_async_cb);
				rhp = NULL;
			} else if (!kthread_should_stop()) {
				rcu_perf_writer_state = RTWS_BARRIER;
				cur_ops->gp_barrier();
				goto retry;
			} else {
				kfree(rhp); /* Because we are stopping. */
			}
		} else if (gp_exp) {
			rcu_perf_writer_state = RTWS_EXP_SYNC;
			cur_ops->exp_sync();
		} else {
			rcu_perf_writer_state = RTWS_SYNC;
			cur_ops->sync();
		}
		rcu_perf_writer_state = RTWS_IDLE;
		t = ktime_get_mono_fast_ns();
		*wdp = t - *wdp;
		i_max = i;
		if (!started &&
		    atomic_read(&n_rcu_perf_writer_started) >= nrealwriters)
			started = true;
		if (!done && i >= MIN_MEAS) {
			done = true;
			sp.sched_priority = 0;
			sched_setscheduler_nocheck(current,
						   SCHED_NORMAL, &sp);
			pr_alert("%s%s rcu_perf_writer %ld has %d measurements\n",
				 perf_type, PERF_FLAG, me, MIN_MEAS);
			if (atomic_inc_return(&n_rcu_perf_writer_finished) >=
			    nrealwriters) {
				schedule_timeout_interruptible(10);
				rcu_ftrace_dump(DUMP_ALL);
				PERFOUT_STRING("Test complete");
				t_rcu_perf_writer_finished = t;
				if (gp_exp) {
					b_rcu_perf_writer_finished =
						cur_ops->exp_completed() / 2;
				} else {
					b_rcu_perf_writer_finished =
						cur_ops->get_gp_seq();
				}
				if (shutdown) {
					smp_mb(); /* Assign before wake. */
					wake_up(&shutdown_wq);
				}
			}
		}
		if (done && !alldone &&
		    atomic_read(&n_rcu_perf_writer_finished) >= nrealwriters)
			alldone = true;
		if (started && !alldone && i < MAX_MEAS - 1)
			i++;
		rcu_perf_wait_shutdown();
	} while (!torture_must_stop());
	if (gp_async) {
		rcu_perf_writer_state = RTWS_BARRIER;
		cur_ops->gp_barrier();
	}
	rcu_perf_writer_state = RTWS_STOPPING;
	writer_n_durations[me] = i_max;
	torture_kthread_stopping("rcu_perf_writer");
	return 0;
}

static void
rcu_perf_print_module_parms(struct rcu_perf_ops *cur_ops, const char *tag)
{
	pr_alert("%s" PERF_FLAG
		 "--- %s: nreaders=%d nwriters=%d verbose=%d shutdown=%d\n",
		 perf_type, tag, nrealreaders, nrealwriters, verbose, shutdown);
}

static void
rcu_perf_cleanup(void)
{
	int i;
	int j;
	int ngps = 0;
	u64 *wdp;
	u64 *wdpp;

	/*
	 * Would like warning at start, but everything is expedited
	 * during the mid-boot phase, so have to wait till the end.
	 */
	if (rcu_gp_is_expedited() && !rcu_gp_is_normal() && !gp_exp)
		VERBOSE_PERFOUT_ERRSTRING("All grace periods expedited, no normal ones to measure!");
	if (rcu_gp_is_normal() && gp_exp)
		VERBOSE_PERFOUT_ERRSTRING("All grace periods normal, no expedited ones to measure!");
	if (gp_exp && gp_async)
		VERBOSE_PERFOUT_ERRSTRING("No expedited async GPs, so went with async!");

	if (torture_cleanup_begin())
		return;

	if (reader_tasks) {
		for (i = 0; i < nrealreaders; i++)
			torture_stop_kthread(rcu_perf_reader,
					     reader_tasks[i]);
		kfree(reader_tasks);
	}

	if (writer_tasks) {
		for (i = 0; i < nrealwriters; i++) {
			torture_stop_kthread(rcu_perf_writer,
					     writer_tasks[i]);
			if (!writer_n_durations)
				continue;
			j = writer_n_durations[i];
			pr_alert("%s%s writer %d gps: %d\n",
				 perf_type, PERF_FLAG, i, j);
			ngps += j;
		}
		pr_alert("%s%s start: %llu end: %llu duration: %llu gps: %d batches: %ld\n",
			 perf_type, PERF_FLAG,
			 t_rcu_perf_writer_started, t_rcu_perf_writer_finished,
			 t_rcu_perf_writer_finished -
			 t_rcu_perf_writer_started,
			 ngps,
			 rcuperf_seq_diff(b_rcu_perf_writer_finished,
					  b_rcu_perf_writer_started));
		for (i = 0; i < nrealwriters; i++) {
			if (!writer_durations)
				break;
			if (!writer_n_durations)
				continue;
			wdpp = writer_durations[i];
			if (!wdpp)
				continue;
			for (j = 0; j <= writer_n_durations[i]; j++) {
				wdp = &wdpp[j];
				pr_alert("%s%s %4d writer-duration: %5d %llu\n",
					perf_type, PERF_FLAG,
					i, j, *wdp);
				if (j % 100 == 0)
					schedule_timeout_uninterruptible(1);
			}
			kfree(writer_durations[i]);
		}
		kfree(writer_tasks);
		kfree(writer_durations);
		kfree(writer_n_durations);
	}

	/* Do flavor-specific cleanup operations.  */
	if (cur_ops->cleanup != NULL)
		cur_ops->cleanup();

	torture_cleanup_end();
}

/*
 * Return the number if non-negative.  If -1, the number of CPUs.
 * If less than -1, that much less than the number of CPUs, but
 * at least one.
 */
static int compute_real(int n)
{
	int nr;

	if (n >= 0) {
		nr = n;
	} else {
		nr = num_online_cpus() + 1 + n;
		if (nr <= 0)
			nr = 1;
	}
	return nr;
}

/*
 * RCU perf shutdown kthread.  Just waits to be awakened, then shuts
 * down system.
 */
static int
rcu_perf_shutdown(void *arg)
{
	do {
		wait_event(shutdown_wq,
			   atomic_read(&n_rcu_perf_writer_finished) >=
			   nrealwriters);
	} while (atomic_read(&n_rcu_perf_writer_finished) < nrealwriters);
	smp_mb(); /* Wake before output. */
	rcu_perf_cleanup();
	kernel_power_off();
	return -EINVAL;
}

static int __init
rcu_perf_init(void)
{
	long i;
	int firsterr = 0;
	static struct rcu_perf_ops *perf_ops[] = {
		&rcu_ops, &rcu_bh_ops, &srcu_ops, &srcud_ops, &sched_ops,
		&tasks_ops,
	};

	if (!torture_init_begin(perf_type, verbose))
		return -EBUSY;

	/* Process args and tell the world that the perf'er is on the job. */
	for (i = 0; i < ARRAY_SIZE(perf_ops); i++) {
		cur_ops = perf_ops[i];
		if (strcmp(perf_type, cur_ops->name) == 0)
			break;
	}
	if (i == ARRAY_SIZE(perf_ops)) {
		pr_alert("rcu-perf: invalid perf type: \"%s\"\n", perf_type);
		pr_alert("rcu-perf types:");
		for (i = 0; i < ARRAY_SIZE(perf_ops); i++)
			pr_cont(" %s", perf_ops[i]->name);
		pr_cont("\n");
		firsterr = -EINVAL;
		goto unwind;
	}
	if (cur_ops->init)
		cur_ops->init();

	nrealwriters = compute_real(nwriters);
	nrealreaders = compute_real(nreaders);
	atomic_set(&n_rcu_perf_reader_started, 0);
	atomic_set(&n_rcu_perf_writer_started, 0);
	atomic_set(&n_rcu_perf_writer_finished, 0);
	rcu_perf_print_module_parms(cur_ops, "Start of test");

	/* Start up the kthreads. */

	if (shutdown) {
		init_waitqueue_head(&shutdown_wq);
		firsterr = torture_create_kthread(rcu_perf_shutdown, NULL,
						  shutdown_task);
		if (firsterr)
			goto unwind;
		schedule_timeout_uninterruptible(1);
	}
	reader_tasks = kcalloc(nrealreaders, sizeof(reader_tasks[0]),
			       GFP_KERNEL);
	if (reader_tasks == NULL) {
		VERBOSE_PERFOUT_ERRSTRING("out of memory");
		firsterr = -ENOMEM;
		goto unwind;
	}
	for (i = 0; i < nrealreaders; i++) {
		firsterr = torture_create_kthread(rcu_perf_reader, (void *)i,
						  reader_tasks[i]);
		if (firsterr)
			goto unwind;
	}
	while (atomic_read(&n_rcu_perf_reader_started) < nrealreaders)
		schedule_timeout_uninterruptible(1);
	writer_tasks = kcalloc(nrealwriters, sizeof(reader_tasks[0]),
			       GFP_KERNEL);
	writer_durations = kcalloc(nrealwriters, sizeof(*writer_durations),
				   GFP_KERNEL);
	writer_n_durations =
		kcalloc(nrealwriters, sizeof(*writer_n_durations),
			GFP_KERNEL);
	if (!writer_tasks || !writer_durations || !writer_n_durations) {
		VERBOSE_PERFOUT_ERRSTRING("out of memory");
		firsterr = -ENOMEM;
		goto unwind;
	}
	for (i = 0; i < nrealwriters; i++) {
		writer_durations[i] =
			kcalloc(MAX_MEAS, sizeof(*writer_durations[i]),
				GFP_KERNEL);
		if (!writer_durations[i]) {
			firsterr = -ENOMEM;
			goto unwind;
		}
		firsterr = torture_create_kthread(rcu_perf_writer, (void *)i,
						  writer_tasks[i]);
		if (firsterr)
			goto unwind;
	}
	torture_init_end();
	return 0;

unwind:
	torture_init_end();
	rcu_perf_cleanup();
	return firsterr;
}

module_init(rcu_perf_init);
module_exit(rcu_perf_cleanup);
back to top