8b23d04 | Maxime Bizon | 05 August 2006, 19:14:32 UTC | [PATCH] doc: update panic_on_oops documentation Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:47 UTC |
2f34931 | Neil Brown | 05 August 2006, 19:14:29 UTC | [PATCH] knfsd: fix race related problem when adding items to and svcrpc auth cache If we don't find the item we are lookng for, we allocate a new one, and then grab the lock again and search to see if it has been added while we did the alloc. If it had been added we need to 'cache_put' the newly created item that we are never going to use. But as it hasn't been initialised properly, putting it can cause an oops. So move the ->init call earlier to that it will always be fully initilised if we have to put it. Thanks to Philipp Matthias Hahn <pmhahn@svs.Informatik.Uni-Oldenburg.de> for reporting the problem. Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:47 UTC |
9b7f750 | Alexey Dobriyan | 05 August 2006, 19:14:27 UTC | [PATCH] debug_locks.h: add "struct task_struct;" Removes many, many "declared inside parameter list" warnings on parisc. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:47 UTC |
60c371b | Andrew Morton | 05 August 2006, 19:14:25 UTC | [PATCH] fadvise() make POSIX_FADV_NOREUSE a no-op The POSIX_FADV_NOREUSE hint means "the application will use this range of the file a single time". It seems to be intended that the implementation will use this hint to perform drop-behind of that part of the file when the application gets around to reading or writing it. However for reasons which aren't obvious (or sane?) I mapped POSIX_FADV_NOREUSE onto POSIX_FADV_WILLNEED. ie: it does readahead. That's daft. So for now, make POSIX_FADV_NOREUSE a no-op. This is a non-back-compatible change. If someone was using POSIX_FADV_NOREUSE to perform readahead, they lose. The likelihood is low. If/when we later implement POSIX_FADV_NOREUSE things will get interesting - to do it fully we'll need to maintain file offset/length ranges and peform all sorts of complex tricks, and managing the lifetime of those ranges' data structures will be interesting.. A sensible implementation would probably ignore the file range and would simply mark the entire file as needing some form of drop-behind treatment. Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:47 UTC |
bb39e41 | Rodolfo Giometti | 05 August 2006, 19:14:22 UTC | [PATCH] au1100fb: Fix startup sequence - fix up the start up sequence. This new sequence allow you to correctly enable the LCD controller even if the bootloader has already did it. - fix up a wrong indentation issue. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:47 UTC |
fd2d543 | Rodolfo Giometti | 05 August 2006, 19:14:19 UTC | [PATCH] au1100fb: info->var.rotate fix Fix "info->var.rotate" data settings. This info should be deduced directly from "fbdev->panel->control_base" defined into au1100fb.h. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:47 UTC |
78944e5 | Antonino A. Daplas | 05 August 2006, 19:14:16 UTC | [PATCH] vt: printk: Fix framebuffer console triggering might_sleep assertion Reported by: Dave Jones Whilst printk'ing to both console and serial console, I got this... (2.6.18rc1) BUG: sleeping function called from invalid context at kernel/sched.c:4438 in_atomic():0, irqs_disabled():1 Call Trace: [<ffffffff80271db8>] show_trace+0xaa/0x23d [<ffffffff80271f60>] dump_stack+0x15/0x17 [<ffffffff8020b9f8>] __might_sleep+0xb2/0xb4 [<ffffffff8029232e>] __cond_resched+0x15/0x55 [<ffffffff80267eb8>] cond_resched+0x3b/0x42 [<ffffffff80268c64>] console_conditional_schedule+0x12/0x14 [<ffffffff80368159>] fbcon_redraw+0xf6/0x160 [<ffffffff80369c58>] fbcon_scroll+0x5d9/0xb52 [<ffffffff803a43c4>] scrup+0x6b/0xd6 [<ffffffff803a4453>] lf+0x24/0x44 [<ffffffff803a7ff8>] vt_console_print+0x166/0x23d [<ffffffff80295528>] __call_console_drivers+0x65/0x76 [<ffffffff80295597>] _call_console_drivers+0x5e/0x62 [<ffffffff80217e3f>] release_console_sem+0x14b/0x232 [<ffffffff8036acd6>] fb_flashcursor+0x279/0x2a6 [<ffffffff80251e3f>] run_workqueue+0xa8/0xfb [<ffffffff8024e5e0>] worker_thread+0xef/0x122 [<ffffffff8023660f>] kthread+0x100/0x136 [<ffffffff8026419e>] child_rip+0x8/0x12 This can occur when release_console_sem() is called but the log buffer still has contents that need to be flushed. The console drivers are called while the console_may_schedule flag is still true. The might_sleep() is triggered when fbcon calls console_conditional_schedule(). Fix by setting console_may_schedule to zero earlier, before the call to the console drivers. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:47 UTC |
38cbcdc | Jan Blunck | 05 August 2006, 19:14:14 UTC | [PATCH] fix vmstat per cpu usage The per cpu variables are used incorrectly in vmstat.h. Signed-off-by: Jan Blunck <jblunck@suse.de> Cc: Christoph Lameter <clameter@engr.sgi.com> Acked-by: Steve Fox <drfickle@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:47 UTC |
9f59ce5 | Chuck Ebbert | 05 August 2006, 19:14:11 UTC | [PATCH] ptrace: make pid of child process available for PTRACE_EVENT_VFORK_DONE When delivering PTRACE_EVENT_VFORK_DONE, provide pid of the child process when tracer calls ptrace(PTRACE_GETEVENTMSG). This is already (accidentally) available when the tracer is tracing VFORK in addition to VFORK_DONE. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Cc: Daniel Jacobowitz <dan@debian.org> Cc: Albert Cahalan <acahalan@gmail.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:46 UTC |
f9abd1a | NeilBrown | 05 August 2006, 19:14:07 UTC | [PATCH] md: Fix a bug that recently crept into md/linear A recent patch that allowed linear arrays to be reconfigured on-line allowed in a bug which results in divide by zero - not all mddev->array_size were converted to conf->array_size. This patch finished the conversion and fixed the bug. The offending patch was commit 7c7546ccf6463edbeee8d9aac6de7be1cd80d08a. Thanks to Simon Kirby <sim@netnation.com> for the bug report. Cc: Simon Kirby <sim@netnation.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:46 UTC |
af2bc7d | David Brownell | 05 August 2006, 19:14:04 UTC | [PATCH] omap-rng build fix Seems like the omap-rng driver in the main tree predates the switch from <asm/hardware/clock.h> to <linux/clk.h> ... now it builds OK. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:46 UTC |
b0b33de | Alexander Zarochentsev | 05 August 2006, 19:14:01 UTC | [PATCH] i_mutex does not need to be locked in reiserfs_delete_inode() Fixes an i_mutex-inside-i_mutex lockdep nasty. Signed-off-by: Alexander Zarochentsev <zam@namesys.com> Cc: <reiserfs-dev@namesys.com> Cc: Hans Reiser <reiser@namesys.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:46 UTC |
c3760ae | Olaf Hering | 05 August 2006, 19:13:59 UTC | [PATCH] crash in aty128_set_lcd_enable() on PowerBook Current Linus tree crashes in aty128_set_lcd_enable() because par->pdev is NULL. This happens since at least a week. Call trace is: aty128_set_lcd_enable aty128fb_set_par fbcon_init visual_init take_over_console fbcon_takeover notifier_call_chain blocking_notifier_call_chain register_framebuffer aty128fb_probe pci_device_probe bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver aty128fb_init init kernel_thread - info->fix was assigned twice. - par->vram_size is assigned in aty128_probe(), no need to redo it again in aty128_init() - register_framebuffer() uses uninitialized struct members, move it past par->pdev assignment and past aty128_bl_init(). Signed-off-by: Olaf Hering <olh@suse.de> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:46 UTC |
06fa45d | Evgeniy Dushistov | 05 August 2006, 19:13:57 UTC | [PATCH] ufs: handle truncated pages ufs_get_locked_page is called twice in ufs code, one time in ufs_truncate path(we allocated last block), and another time when fragments are reallocated. In ideal world in the second case on allocation/free block layer we should not know that things like `truncate' exists, but now with such crutch like ufs_get_locked_page we can (or should?) skip truncated pages. Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:46 UTC |
1fb32b7 | Evgeniy Dushistov | 05 August 2006, 19:13:55 UTC | [PATCH] ufs: ufs_get_locked_page() race fix As discussed earlier: http://lkml.org/lkml/2006/6/28/136 this patch fixes such issue: `ufs_get_locked_page' takes page from cache after that `vmtruncate' takes page and deletes it from cache `ufs_get_locked_page' locks page, and reports about EIO error. Also because of find_lock_page always return valid page or NULL, we have no need to check it if page not NULL. Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:46 UTC |
e91467e | Christian Borntraeger | 05 August 2006, 19:13:52 UTC | [PATCH] bug in futex unqueue_me This patch adds a barrier() in futex unqueue_me to avoid aliasing of two pointers. On my s390x system I saw the following oops: Unable to handle kernel pointer dereference at virtual kernel address 0000000000000000 Oops: 0004 [#1] CPU: 0 Not tainted Process mytool (pid: 13613, task: 000000003ecb6ac0, ksp: 00000000366bdbd8) Krnl PSW : 0704d00180000000 00000000003c9ac2 (_spin_lock+0xe/0x30) Krnl GPRS: 00000000ffffffff 000000003ecb6ac0 0000000000000000 0700000000000000 0000000000000000 0000000000000000 000001fe00002028 00000000000c091f 000001fe00002054 000001fe00002054 0000000000000000 00000000366bddc0 00000000005ef8c0 00000000003d00e8 0000000000144f91 00000000366bdcb8 Krnl Code: ba 4e 20 00 12 44 b9 16 00 3e a7 84 00 08 e3 e0 f0 88 00 04 Call Trace: ([<0000000000144f90>] unqueue_me+0x40/0xe4) [<0000000000145a0c>] do_futex+0x33c/0xc40 [<000000000014643e>] sys_futex+0x12e/0x144 [<000000000010bb00>] sysc_noemu+0x10/0x16 [<000002000003741c>] 0x2000003741c The code in question is: static int unqueue_me(struct futex_q *q) { int ret = 0; spinlock_t *lock_ptr; /* In the common case we don't take the spinlock, which is nice. */ retry: lock_ptr = q->lock_ptr; if (lock_ptr != 0) { spin_lock(lock_ptr); /* * q->lock_ptr can change between reading it and * spin_lock(), causing us to take the wrong lock. This * corrects the race condition. [...] and my compiler (gcc 4.1.0) makes the following out of it: 00000000000003c8 <unqueue_me>: 3c8: eb bf f0 70 00 24 stmg %r11,%r15,112(%r15) 3ce: c0 d0 00 00 00 00 larl %r13,3ce <unqueue_me+0x6> 3d0: R_390_PC32DBL .rodata+0x2a 3d4: a7 f1 1e 00 tml %r15,7680 3d8: a7 84 00 01 je 3da <unqueue_me+0x12> 3dc: b9 04 00 ef lgr %r14,%r15 3e0: a7 fb ff d0 aghi %r15,-48 3e4: b9 04 00 b2 lgr %r11,%r2 3e8: e3 e0 f0 98 00 24 stg %r14,152(%r15) 3ee: e3 c0 b0 28 00 04 lg %r12,40(%r11) /* write q->lock_ptr in r12 */ 3f4: b9 02 00 cc ltgr %r12,%r12 3f8: a7 84 00 4b je 48e <unqueue_me+0xc6> /* if r12 is zero then jump over the code.... */ 3fc: e3 20 b0 28 00 04 lg %r2,40(%r11) /* write q->lock_ptr in r2 */ 402: c0 e5 00 00 00 00 brasl %r14,402 <unqueue_me+0x3a> 404: R_390_PC32DBL _spin_lock+0x2 /* use r2 as parameter for spin_lock */ So the code becomes more or less: if (q->lock_ptr != 0) spin_lock(q->lock_ptr) instead of if (lock_ptr != 0) spin_lock(lock_ptr) Which caused the oops from above. After adding a barrier gcc creates code without this problem: [...] (the same) 3ee: e3 c0 b0 28 00 04 lg %r12,40(%r11) 3f4: b9 02 00 cc ltgr %r12,%r12 3f8: b9 04 00 2c lgr %r2,%r12 3fc: a7 84 00 48 je 48c <unqueue_me+0xc4> 400: c0 e5 00 00 00 00 brasl %r14,400 <unqueue_me+0x38> 402: R_390_PC32DBL _spin_lock+0x2 As a general note, this code of unqueue_me seems a bit fishy. The retry logic of unqueue_me only works if we can guarantee, that the original value of q->lock_ptr is always a spinlock (Otherwise we overwrite kernel memory). We know that q->lock_ptr can change. I dont know what happens with the original spinlock, as I am not an expert with the futex code. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@timesys.com> Signed-off-by: Christian Borntraeger <borntrae@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:46 UTC |
72f0b4e | Andrew Morton | 05 August 2006, 19:13:47 UTC | [PATCH] disable debugging version of write_lock() We've confirmed that the debug version of write_lock() can get stuck for long enough to cause NMI watchdog timeouts and hence a crash. We don't know why, yet. Disable it for now. Also disable the similar read_lock() code. Just in case. Thanks to Dave Olson <olson@unixfolk.com> for reporting and testing. Acked-by: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:46 UTC |
927cbe8 | Adrian Bunk | 05 August 2006, 19:13:45 UTC | [PATCH] drivers/edac/edac_mc.h must #include <linux/platform_device.h> With CONFIG_PCI=n: CC drivers/edac/edac_mc.o drivers/edac/edac_mc.c: In function âadd_mc_to_global_listâ: drivers/edac/edac_mc.c:1362: error: implicit declaration of function âto_platform_deviceâ drivers/edac/edac_mc.c:1362: error: invalid type argument of â->â drivers/edac/edac_mc.c: In function âedac_mc_add_mcâ: drivers/edac/edac_mc.c:1467: error: invalid type argument of â->â drivers/edac/edac_mc.c: In function âedac_mc_del_mcâ: drivers/edac/edac_mc.c:1504: error: invalid type argument of â->â Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:46 UTC |
a7ef787 | Rafael J. Wysocki | 05 August 2006, 19:13:42 UTC | [PATCH] Make suspend possible with a traced process at a breakpoint It should be possible to suspend, either to RAM or to disk, if there's a traced process that has just reached a breakpoint. However, this is a special case, because its parent process might have been frozen already and then we are unable to deliver the "freeze" signal to the traced process. If this happens, it's better to cancel the freezing of the traced process. Ref. http://bugzilla.kernel.org/show_bug.cgi?id=6787 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 06 August 2006, 15:57:45 UTC |
f5d635f | Linus Torvalds | 04 August 2006, 19:25:24 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] make uncached allocator more node aware | 04 August 2006, 19:25:24 UTC |
eca7994 | Dean Nelson | 28 June 2006, 18:50:09 UTC | [IA64] make uncached allocator more node aware The uncached allocator has a function, uncached_get_new_chunk(), that needs to be serialized on a per node basis. It also has a global variable, allocated_granules, which should be defined on a per node basis and protected by that serialization. Additionally, all error returns from functions called (like ia64_pal_mc_drain()) should be handled appropriately. Signed-off-by: Dean Nelson <dcn@sgi.com> Acked-by: Jes Sorenson <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 04 August 2006, 17:27:27 UTC |
3b445ee | Linus Torvalds | 04 August 2006, 16:56:40 UTC | Merge branch 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6 * 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6: SUNRPC: Fix obvious refcounting bugs in rpc_pipefs. RPC: Ensure that we disconnect TCP socket when client requests error out NLM/lockd: remove b_done NFS: make 2 functions static NFS: Release dcache_lock in an error path of nfs_path | 04 August 2006, 16:56:40 UTC |
1295278 | Linus Torvalds | 04 August 2006, 16:41:22 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq * master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Propagate acpi_processor_preregister_performance return value. [CPUFREQ] [2/2] demand load governor modules. [CPUFREQ] [1/2] add __find_governor helper and clean up some error handling. [CPUFREQ] Longhaul - Rename & fix multipliers table [CPUFREQ] Longhaul - Fix power state test to do something more useful [CPUFREQ] Longhaul - Readd accidentally dropped line [CPUFREQ] Make longhaul_walk_callback() static [CPUFREQ] X86_GX_SUSPMOD must depend on PCI [CPUFREQ] Longhaul - Initialise later. [CPUFREQ] Longhaul - Workaround issues with APIC. [CPUFREQ] Longhaul - Hook into ACPI C states. [CPUFREQ] return error when failing to set minfreq | 04 August 2006, 16:41:22 UTC |
efe78cd | Linus Torvalds | 04 August 2006, 00:33:59 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] ahci: skip protocol test altogether in spurious interrupt code | 04 August 2006, 00:33:59 UTC |
8861e98 | Linus Torvalds | 04 August 2006, 00:33:32 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] myri10ge - Fix spurious invokations of the watchdog reset handler [PATCH] myri10ge - Write the firmware in 256-bytes chunks [PATCH] Stop calling phy_stop_interrupts() twice [PATCH] s2io driver bug fixes #2 [PATCH] s2io driver bug fixes #1 [PATCH] zd1211rw: Packet filter fix for managed (STA) mode [PATCH] zd1211rw: Fixed endianess issue with length info tag detection [PATCH] zd1211rw: Remove bogus assert [PATCH] zd1211rw: Fix software encryption/decryption [PATCH] zd1211rw: Pass more management frame types up to host [PATCH] zd1211rw: Fixes radiotap header | 04 August 2006, 00:33:32 UTC |
6e31554 | Linus Torvalds | 04 August 2006, 00:31:15 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: PNP: Add missing casts in printk() arguments PCI: docking station: remove dock uevents PCI: Unhide the SMBus on Asus PU-DLS PCI Hotplug: add acpiphp to MAINTAINERS PCI: pci/search: EXPORTs cannot be __devinit PCIE: cleanup on probe error pcie: fix warnings when CONFIG_PM=n | 04 August 2006, 00:31:15 UTC |
f1d39b2 | Unicorn Chang | 01 August 2006, 04:18:07 UTC | [PATCH] ahci: skip protocol test altogether in spurious interrupt code Skip protocol test altogether in spurious interrupt code. If PIOS is received when it shouldn't, ahci will raise protocol violation. Signed-off-by: Unicorn Chang <uchang@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 August 2006, 21:34:52 UTC |
c54772e | Brice Goglin | 30 July 2006, 04:14:15 UTC | [PATCH] myri10ge - Fix spurious invokations of the watchdog reset handler Fix spurious invocations of the watchdog reset handler. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 August 2006, 21:31:10 UTC |
e454358 | Brice Goglin | 30 July 2006, 04:14:09 UTC | [PATCH] myri10ge - Write the firmware in 256-bytes chunks When writing the firmware to the NIC, the FIFO is 256-bytes long, so we use 256-bytes chunks and a read to wait until the previous write is done. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 August 2006, 21:31:10 UTC |
817acf5 | Sergei Shtylylov | 25 July 2006, 20:53:53 UTC | [PATCH] Stop calling phy_stop_interrupts() twice Prevent phylib from freeing PHY IRQ twice on closing an eth device: phy_disconnect() first calls phy_stop_interrupts(), then it calls phy_stop_machine() which in turn calls phy_stop_interrupts() making the kernel complain on each bootup... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 August 2006, 21:29:59 UTC |
75c30b1 | Ananda Raju | 24 July 2006, 23:55:09 UTC | [PATCH] s2io driver bug fixes #2 This patch contains some of the bug fixes and enhancements done to s2io driver. Following are the brief description of changes 1. code cleanup to handle gso modification better 2. Move repeated code in rx path, to a common function s2io_chk_rx_buffers() 3. Bug fix in MSI interrupt 4. clear statistics when card is down 5. Avoid linked list traversing in lro aggregation. 6. Use pci_dma_sync_single_for_cpu for buffer0 in case of 2/3 buffer mode. 7. ethtool tso get/set functions to set clear NETIF_F_TSO6 8. Stop LRO aggregation when we receive ECN notification Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 August 2006, 21:27:26 UTC |
b41477f | Ananda Raju | 24 July 2006, 23:52:49 UTC | [PATCH] s2io driver bug fixes #1 This patch contains some of the bug fixes and enhancements done to s2io driver. Following are the brief description of changes 1. Introduced macro "S2IO_PARM_INT" for declaring integer load parameter 2. UDP_RR test failure, memset txdl after Tx completion 3. PXE boot may leave adapter in unknown state so do reset in probe. 4. Add Tx completion code in netpoll 5. In s2io_vpd_read() move array vpd_data[] to pointer, saves stack memory 6. Fix bug in ethtool online test Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 August 2006, 21:27:25 UTC |
2b14c30 | Jeff Garzik | 03 August 2006, 21:19:44 UTC | Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes | 03 August 2006, 21:19:44 UTC |
5c3e985 | Trond Myklebust | 29 July 2006, 21:37:40 UTC | SUNRPC: Fix obvious refcounting bugs in rpc_pipefs. Doh! Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 496f408f2f0e7ee5481a7c2222189be6c4f5aa6c commit) | 03 August 2006, 20:57:26 UTC |
e0ab53d | Trond Myklebust | 27 July 2006, 21:22:50 UTC | RPC: Ensure that we disconnect TCP socket when client requests error out If we're part way through transmitting a TCP request, and the client errors, then we need to disconnect and reconnect the TCP socket in order to avoid confusing the server. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 031a50c8b9ea82616abd4a4e18021a25848941ce commit) | 03 August 2006, 20:56:55 UTC |
f3d43c7 | J. Bruce Fields | 03 August 2006, 19:07:47 UTC | NLM/lockd: remove b_done We never actually set the b_done field any more; it's always zero. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from af8412d4283ef91356e65e0ed9b025b376aebded commit) | 03 August 2006, 20:56:02 UTC |
e4e2051 | Adrian Bunk | 03 August 2006, 19:07:47 UTC | NFS: make 2 functions static nfs_writedata_free() and nfs_readdata_free() can now become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 5e1ce40f0c3c8f67591aff17756930d7a18ceb1a commit) | 03 August 2006, 20:55:41 UTC |
ce51019 | Josh Triplett | 24 July 2006, 23:30:00 UTC | NFS: Release dcache_lock in an error path of nfs_path In one of the error paths of nfs_path, it may return with dcache_lock still held; fix this by adding and using a new error path Elong_unlock which unlocks dcache_lock. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from f4b90b43677fb23297c56802c3056fc304f988d9 commit) | 03 August 2006, 20:55:01 UTC |
2131ca8 | Pierre Ossman | 13 July 2006, 09:35:41 UTC | PNP: Add missing casts in printk() arguments Some resource_size_t values are fed to printk() without handling the fact that they can have different size depending on your .config. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 03 August 2006, 20:20:06 UTC |
5669021 | Kristen Carlson Accardi | 01 August 2006, 21:59:19 UTC | PCI: docking station: remove dock uevents Remove uevent dock notifications. There are no consumers of these events at present, and uevents are likely not the correct way to send this type of event anyway. Until I get some kind of idea if anyone in userspace cares about dock events, I will just not send any. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 03 August 2006, 20:20:06 UTC |
321311a | Jean Delvare | 31 July 2006, 06:53:15 UTC | PCI: Unhide the SMBus on Asus PU-DLS Unhide the SMBus controller on the Asus PU-DLS board. This fixes bug #6763. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 03 August 2006, 20:20:06 UTC |
998be20 | Kristen Carlson Accardi | 26 July 2006, 17:52:33 UTC | PCI Hotplug: add acpiphp to MAINTAINERS Add acpiphp to the MAINTAINERS file. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 03 August 2006, 20:20:06 UTC |
c8439cf | Randy Dunlap | 18 July 2006, 21:33:16 UTC | PCI: pci/search: EXPORTs cannot be __devinit EXPORTed symbols cannot be __init/__devinit. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 03 August 2006, 20:20:06 UTC |
e4fd1f4 | Randy Dunlap | 07 July 2006, 04:36:01 UTC | PCIE: cleanup on probe error If pcie_portdrv_probe() fails but it had already called pci_enable_device(), then call pci_disable_device() when returning error. Is there some reason that this isn't being done? or was it just missed? Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 03 August 2006, 20:20:06 UTC |
6085483 | Henrik Kretzschmar | 06 July 2006, 14:05:51 UTC | pcie: fix warnings when CONFIG_PM=n Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 03 August 2006, 20:20:05 UTC |
c31ca59 | Linus Torvalds | 03 August 2006, 19:50:20 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix show_mem for VIRTUAL_MEM_MAP+FLATMEM [IA64] align high endpoint of VIRTUAL_MEM_MAP [PATCH] Fix RAID5 + IA64 compile [IA64] Don't alloc empty frame in ia64_switch_mode_phys [IA64] Do not assume output registers be reservered. [IA64] add platform check to snsc driver init [IA64] sparse cleanups [IA64] Fix breakage in simscsi.c [IA64] Format /proc/pal/*/version_info correctly | 03 August 2006, 19:50:20 UTC |
fd60ae4 | Jack Morgenstein | 03 August 2006, 17:56:42 UTC | IB/uverbs: Avoid a crash on device hot remove Wait until all users have closed their device context before allowing device unregistration to complete. This prevents a crash caused by referring to stale data structures. A better solution would be to have a way to revoke contexts rather than waiting for userspace to close the context, but that's a much bigger change that will have to wait. For now let's at least avoid the crash. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> | 03 August 2006, 17:56:42 UTC |
8ddc7c5 | Or Gerlitz | 13 July 2006, 08:00:39 UTC | IB/ipoib: Remove broken link from Kconfig and documentation Remove references to the IPoIB IETF working group as it has been closed. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com> | 03 August 2006, 17:48:31 UTC |
559ce8f | Ishai Rabinovitz | 03 August 2006, 17:35:43 UTC | IB/srp: Work around data corruption bug on Mellanox targets Data corruption has been seen with Mellanox SRP targets when FMRs create a memory region with I/O virtual address != 0. Add a workaround that disables FMR merging for Mellanox targets (OUI 0002c9). Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> | 03 August 2006, 17:35:43 UTC |
e44e41d | Bob Picco | 28 June 2006, 16:55:43 UTC | [IA64] fix show_mem for VIRTUAL_MEM_MAP+FLATMEM contig.c (FLATMEM) requires the same optimization as in discontig.c for show_mem when VIRTUAL_MEM_MAP is in use. Otherwise FLATMEM has softlockup timeouts. This was boot tested for memory configuration: SPARSEMEM, DISCONTIG+VIRTUAL_MEM_MAP, FLATMEM, FLATMEM+VIRTUAL_MEM_MAP and FLATMEM+VIRTUAL_MEM_MAP with largest memory gap less than LARGE_GAP by using boot parameter "mem=". This was boot tested and "echo m >/proc/sysrq-trigger" output evaluated for : FLATMEM, FLATMEM+VIRTUAL_MEM_MAP, DISCONTIGMEM+VIRTUAL_MEM_MAP and SPARSEMEM. Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 03 August 2006, 17:13:23 UTC |
921eea1 | Bob Picco | 28 June 2006, 16:54:55 UTC | [IA64] align high endpoint of VIRTUAL_MEM_MAP Assure that vmem_map's high endpoint is MAX_ORDER aligned. Not doing so violates the buddy allocator algorithm. Also anyone using mem=XXX on boot line and not aligned to MAX_ORDER requires this patch in order to satisfy buddy allocator. vmem_map always starts at pfn 0. The potentially large MAX_ORDER on ia64 (due to hugetlbfs) requires that the end of vmem_map be aligned to MAX_ORDER_NR_PAGES. This was boot tested for: FLATMEM, FLATMEM+VIRTUAL_MEM_MAP, DISCONTIGMEM+VIRTUAL_MEM_MAP and SPARSEMEM. Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 03 August 2006, 17:12:30 UTC |
0a69ca9 | Prarit Bhargava | 31 July 2006, 13:12:11 UTC | [PATCH] Fix RAID5 + IA64 compile CONFIG_MD_RAID5 became CONFIG_MD_RAID456 in drivers/md/Kconfig. Make the same change in arch/ia64 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Aron Griffis <aron@hp.com> Acked-by: Jes Sorenson <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 03 August 2006, 17:04:27 UTC |
d916a8f | Ishai Rabinovitz | 25 July 2006, 16:54:09 UTC | IB/srp: Fix crash in srp_reconnect_target Protect against srp_reset_device() clearing the req_queue while srp_reconnect_target() is in progress (note that state change at the top of srp_reconnect_target() is not sufficient for this since srp_reset_device() ignores the state). Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> | 03 August 2006, 16:44:22 UTC |
75df23e | Sean Hefty | 25 July 2006, 16:52:01 UTC | IB/cm: Fix error handling in ib_send_cm_req Report error code rather than success (0) on failure allocating timewait_info in ib_send_cm_req(). Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com> | 03 August 2006, 16:44:22 UTC |
69e9fbb | Roland Dreier | 03 August 2006, 16:44:22 UTC | IB/mthca: Clean up mthca array index mask Define a constant MTHCA_ARRAY_MASK to replace repeated uses of (PAGE_SIZE / sizeof (void *) - 1) in mthca array code. Signed-off-by: Roland Dreier <rolandd@cisco.com> | 03 August 2006, 16:44:22 UTC |
bf74c74 | Michael S. Tsirkin | 26 July 2006, 13:02:53 UTC | IB/mthca: Fix mthca_array_clear() thinko mthca_array_clear() does not clear the slot if the used count is positive. This leads to crashes in mthca_qp_event() since that uses mthca_array_get() to check that the qp is valid. Discovered by Ali Ayoub. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> | 03 August 2006, 16:44:21 UTC |
3f2792f | Al Viro | 16 July 2006, 10:43:48 UTC | [PATCH] take filling ->pid, etc. out of audit_get_context() move that stuff downstream and into the only branch where it'll be used. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 03 August 2006, 14:59:51 UTC |
5ac3a9c | Al Viro | 16 July 2006, 10:38:45 UTC | [PATCH] don't bother with aux entires for dummy context Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 03 August 2006, 14:59:42 UTC |
d51374a | Al Viro | 03 August 2006, 14:59:26 UTC | [PATCH] mark context of syscall entered with no rules as dummy Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 03 August 2006, 14:59:26 UTC |
471a5c7 | Al Viro | 10 July 2006, 12:29:24 UTC | [PATCH] introduce audit rules counter Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 03 August 2006, 14:55:18 UTC |
5422e01 | Amy Griffis | 01 August 2006, 21:52:26 UTC | [PATCH] fix audit oops with invalid operator Michael C Thompson wrote: [Tue Aug 01 2006, 02:36:36PM EDT] > The trigger for this oops is: > # auditctl -a exit,always -S pread64 -F 'inode<1' Setting the err value will fix it. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 03 August 2006, 14:54:43 UTC |
6988434 | Amy Griffis | 13 July 2006, 17:17:12 UTC | [PATCH] fix oops with CONFIG_AUDIT and !CONFIG_AUDITSYSCALL Always initialize the audit_inode_hash[] so we don't oops on list rules. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 03 August 2006, 14:50:39 UTC |
73d3ec5 | Amy Griffis | 13 July 2006, 17:16:39 UTC | [PATCH] fix missed create event for directory audit When an object is created via a symlink into an audited directory, audit misses the event due to not having collected the inode data for the directory. Modify __audit_inode_child() to copy the parent inode data if a parent wasn't found in audit_names[]. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 03 August 2006, 14:50:30 UTC |
3e2efce | Amy Griffis | 13 July 2006, 17:16:02 UTC | [PATCH] fix faulty inode data collection for open() with O_CREAT When the specified path is an existing file or when it is a symlink, audit collects the wrong inode number, which causes it to miss the open() event. Adding a second hook to the open() path fixes this. Also add audit_copy_inode() to consolidate some code. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 03 August 2006, 14:50:21 UTC |
46f5960 | Linus Torvalds | 03 August 2006, 05:35:26 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) [NET]: Fix more per-cpu typos [SECURITY]: Fix build with CONFIG_SECURITY disabled. [I/OAT]: Remove CPU hotplug lock from net_dma_rebalance [DECNET]: Fix for routing bug [AF_UNIX]: Kernel memory leak fix for af_unix datagram getpeersec patch [NET]: skb_queue_lock_key() is no longer used. [NET]: Remove lockdep_set_class() call from skb_queue_head_init(). [IPV6]: SNMPv2 "ipv6IfStatsOutFragCreates" counter error [IPV6]: SNMPv2 "ipv6IfStatsInHdrErrors" counter error [NET]: Kill the WARN_ON() calls for checksum fixups. [NETFILTER]: xt_hashlimit/xt_string: missing string validation [NETFILTER]: SIP helper: expect RTP streams in both directions [E1000]: Convert to netdev_alloc_skb [TG3]: Convert to netdev_alloc_skb [NET]: Add netdev_alloc_skb(). [TCP]: Process linger2 timeout consistently. [SECURITY] secmark: nul-terminate secdata [NET] infiniband: Cleanup ib_addr module to use the netevents [NET]: Core net changes to generate netevents [NET]: Network Event Notifier Mechanism. ... | 03 August 2006, 05:35:26 UTC |
90eb29e | Linus Torvalds | 03 August 2006, 03:25:35 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (24 commits) Revert "[PATCH] USB: move usb_device_class class devices to be real devices" Revert "[PATCH] USB: convert usb class devices to real devices" USB: UHCI: Don't test the Short Packet Detect bit USB: unusual_devs entry for Nokia 3250 USB: dummy-hcd: disable interrupts during req->complete USB: fix the USB_GADGET_DUMMY_HCD dependencies USB: ati_remote.c: autorepeat fix USB: doc: fixes devio.c location in proc_usb_info.txt. USB: doc: usb-help.txt update. USB: Patch for rtl8150 to fix unplug problems USB: cypress driver comment updates USB: unusual_devs device removal usb-storage: Add US_FL_IGNORE_DEVICE flag; ignore ZyXEL G220F USB: New USB ID for Belkin Serial Adapter USB: Additional PID for the ftdi_sio driver USB: adding support for SHARP WS003SH to ipaq.c USB: Fix Freescale high-speed USB host dependency USB: Removed 3-port device handler from Option driver USB: Drop Sierra Wireless MC8755 from the Option driver USB: Let option driver handle Anydata CDMA modems. Remove anydata driver. ... | 03 August 2006, 03:25:35 UTC |
1398ab7 | Linus Torvalds | 03 August 2006, 03:21:23 UTC | Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3743/1: ARM: OMAP: Fix compile for OMAP [ARM] 3739/1: genirq updates: irq_chip, add and use irq_chip.name | 03 August 2006, 03:21:23 UTC |
a166222 | Muli Ben-Yehuda | 02 August 2006, 20:37:31 UTC | [PATCH] x86_64: Fix CONFIG_IOMMU_DEBUG If CONFIG_IOMMU_DEBUG is set force_iommu defaults to 1. In the case where no HW IOMMU is present in the machine and we end up using nommu, leaving force_iommu set to 1 causes dma_alloc_coherent to do the wrong thing. Therefore, if we end up using nommu, make sure force_iommu is 0. Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 03 August 2006, 03:19:54 UTC |
2699500 | Andi Kleen | 02 August 2006, 20:37:28 UTC | [PATCH] x86_64: Fix backtracing for interrupt stacks Re-add backlink for old style unwinder to stack switching. Add proper stack frame and CFI annotations to call_softirq This prevents a oops when backtracing with fallback through the interrupt stack top. Suggested by Jan Beulich and Herbert Xu wanted it in 2.6.18. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 03 August 2006, 03:19:54 UTC |
ae74c3b | Linus Torvalds | 03 August 2006, 03:17:49 UTC | Fix force_sig_info() semantics after cleanups Suresh points out that commit b0423a0d9cc836b2c3d796623cd19236bfedfe63 broke the semantics of a synchronous signal like SIGSEGV occurring recursively inside its own handler handler (or, indeed, any other context when the signal was blocked). That was unintentional, and this fixes things up by reinstating the old semantics, but without reverting the cleanups. Cc: Paul E. McKenney <paulmck@us.ibm.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 03 August 2006, 03:17:49 UTC |
202668e | Linus Torvalds | 03 August 2006, 03:12:25 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-2.6.18 * git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-2.6.18: gitignore: gitignore quilt's files kbuild: always use $(CC) for $(call cc-version) kconfig: correct oldconfig for unset choice options kbuild: -fno-stack-protector is not good kbuild: fix typo in modpost kbuild: improve error from file2alias kbuild: .gitignore utsrelease.h kbuild: version.h and new headers_* targets does not require a kernel config kbuild: hardcode value of YACC&LEX for aic7-triple-x | 03 August 2006, 03:12:25 UTC |
cae74b3 | Greg Kroah-Hartman | 02 August 2006, 23:52:10 UTC | Revert "[PATCH] USB: move usb_device_class class devices to be real devices" This reverts c182274ffe1277f4e7c564719a696a37cacf74ea commit because it required a newer version of udev to work properly than what is currently documented in Documentation/Changes. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:52:10 UTC |
27fb4f0 | Greg Kroah-Hartman | 02 August 2006, 23:49:37 UTC | Revert "[PATCH] USB: convert usb class devices to real devices" This reverts bd00949647ddcea47ce4ea8bb2cfcfc98ebf9f2a commit because it required a newer version of udev to work properly than what is currently documented in Documentation/Changes. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:49:37 UTC |
f443ddf | Alan Stern | 31 July 2006, 14:16:24 UTC | USB: UHCI: Don't test the Short Packet Detect bit Apparently some UHCI controllers change the value of the Short Packet Detect (SPD) bit in the TD status word -- presumably when they receive a short packet. This patch (as759) changes uhci-hcd to avoid assuming that the bit is unchanged; in fact, the driver no longer looks at SPD at all. This fixes the second problem reported in Bugzilla #6752. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:42 UTC |
de1caa4 | Alan Stern | 31 July 2006, 14:10:28 UTC | USB: unusual_devs entry for Nokia 3250 Here is another unusual_devs entry (as760) for another Nokia device, this time the 3250. From: Mario Rettig <mariorettig@web.de> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:42 UTC |
b4dbda1 | Alan Stern | 28 July 2006, 21:07:34 UTC | USB: dummy-hcd: disable interrupts during req->complete This patch (as756) fixes a bug in dummy-hcd found by the lockdep checker. In one of the code paths, the driver did not disable interrupts before calling a request completion routine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:42 UTC |
be0c801 | Adrian Bunk | 30 July 2006, 23:43:53 UTC | USB: fix the USB_GADGET_DUMMY_HCD dependencies If USB=m, USB_GADGET=y, the option USB_GADGET_DUMMY_HCD mustn't be offered since selecting it results in a compile error. This patch fixes kernel Bugzilla #6534 reported by Toralf F\xf6rster. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:42 UTC |
168ffc4 | Marko Macek | 30 July 2006, 08:55:12 UTC | USB: ati_remote.c: autorepeat fix When HZ is set to 250 (new default) or 100, the time span during which repeated events from the device are ignored could be too small due to ms->jiffies rounding. This causes the auto repeat to kick in early making it impossible for the user to generate individual press/release events. Increate the timeout to compensate. Signed-off-by: Marko Macek <Marko.Macek@gmx.net> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:42 UTC |
064e875 | Luiz Fernando N. Capitulino | 28 July 2006, 01:01:34 UTC | USB: doc: fixes devio.c location in proc_usb_info.txt. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:42 UTC |
0e74b06 | Luiz Fernando N. Capitulino | 28 July 2006, 00:59:17 UTC | USB: doc: usb-help.txt update. http://www.suse.cz/development/linux-usb/ doesn't exist anymore. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:42 UTC |
23219c1 | Peter Chubb | 25 July 2006, 10:39:14 UTC | USB: Patch for rtl8150 to fix unplug problems The RTL8150 driver currently crashes the kernel if the USB lead is unplugged while the device is active. The attached patch adds error handling to tell the network layer that the device has gone away when the device is unplugged. With this patch, the device can be plugged and unplugged to one's hearts' content, without crashing anything. Oh, I've also added rudimentary suspend and resume methods. Signed-off-by: Peter Chubb <peter@gelato.unsw.edu.au> Acked-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:42 UTC |
6ad576b | Oliver Bock | 27 July 2006, 19:34:58 UTC | USB: cypress driver comment updates Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:42 UTC |
eda30fd | Phil Dibowitz | 27 July 2006, 05:36:29 UTC | USB: unusual_devs device removal This entry has been a mystery for some time. I had sent this patch as an RFC a while ago, and now we've had two reports of this not being needed, so I'm removing it. In the event there are reports of breakage, we should revert this patch, but add a US_FL_NEED_OVERRIDE flag. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:42 UTC |
3c33242 | Daniel Drake | 26 July 2006, 12:59:23 UTC | usb-storage: Add US_FL_IGNORE_DEVICE flag; ignore ZyXEL G220F This patch adds a new unusual_devs flag for when usb-storage needs to ignore a device that it would otherwise claim. We need to ignore the ZyXEL G220F as it is a virtual CDROM drive which includes the windows driver for this USB-WLAN adapter. After the windows driver is installed on a windows system, it converts it into a WLAN adapter (by ejecting the virtual disc). The virtual CDROM is of no interest to Linux users. The zd1211rw driver will automatically perform the eject operation, we just need to ensure that usb-storage does not claim the device. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:42 UTC |
b7aa94b | Kim Oldfield | 25 July 2006, 05:54:59 UTC | USB: New USB ID for Belkin Serial Adapter Can you add the USB IDs for the Belkin USB Serial adapter (P/N F5U257) to the pl2303 driver in the Linux Kernel? Are you the appropriate person to approach for this? I recently purchased a Belkin USB Serial adapter (P/N F5U257) and found that it didn't work. After a bit of experimentation I found that it works with the pl2303 driver once the ID has been added. See attached patch to fix this. Also attached is the output from lsusb -v just in case you require any information from there. From: Kim Oldfield <luv@oldfield.wattle.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:41 UTC |
274a4bb | Dave Platt | 19 July 2006, 04:26:54 UTC | USB: Additional PID for the ftdi_sio driver Here's a short patch which adds one PID to the set of devices supported by the ftdi_sio driver. The device in question is a DLP module used as part of a ham radio USB-to-packet adapter. From: Dave Platt <dplatt@radagast.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:41 UTC |
aec0d50 | Norihiko Tomiyama | 13 July 2006, 00:43:02 UTC | USB: adding support for SHARP WS003SH to ipaq.c This small patch enables a support of "SHARP WS003SH". "SHARP WS003SH" (usullary called "W-ZERO3") is most polular All-in-one handheld CellPhone-plus-WindowsMobile5.0 in Japan. "SHARP WS003SH" has two modes, "Modem" and "ActiveSync". But, "ActiveSync" mode uses NDIS connection. Therefore, ipaq.c can only support "Modem" mode. http://www.sharp.co.jp/ws/ (Japanese Site) http://greggman.com/edit/editheadlines/2005-12-24.htm From: Norihiko Tomiyama <norihiko.tomiyama@ctc-g.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:41 UTC |
a11570f | Li Yang | 14 July 2006, 11:58:14 UTC | USB: Fix Freescale high-speed USB host dependency The high-speed USB SOC only exists on MPC834x family not MPC83xx family. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:41 UTC |
a01c452 | Matthias Urlichs | 20 July 2006, 03:01:21 UTC | USB: Removed 3-port device handler from Option driver Dead code. From: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:41 UTC |
7c1c2f7 | Matthias Urlichs | 20 July 2006, 02:56:00 UTC | USB: Drop Sierra Wireless MC8755 from the Option driver This device is now supported by sierra.c. From: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:41 UTC |
31fcbb7 | Matthias Urlichs | 12 July 2006, 06:35:29 UTC | USB: Let option driver handle Anydata CDMA modems. Remove anydata driver. Signed-off-by: Jon K Hellan <hellan@acm.org> Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:41 UTC |
02b2ac5 | Matthias Urlichs | 02 August 2006, 23:41:41 UTC | USB: Option driver: Short driver names were identical The short driver names were not unique, which prevented the driver from actually loading. Also, one of the ioctl pointers was missing. Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:41 UTC |
b3fdab5 | Matthias Urlichs | 02 August 2006, 23:41:41 UTC | USB: Option driver: removed change history and linux/version.h include Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:41 UTC |
0365ee0 | David Brownell | 19 June 2006, 21:27:20 UTC | USB: AT91 OHCI updates, mostly power management OHCI updates for AT91 series processors: - Get ready for at91sam926x processors (ARMv5tej not ARMv4t) - Suspend/resume support now behaves properly - In "standby" mode, OHCI can be a source of system wakeup events (remote wakeup, device connect/disconnect, etc) And minor cleanups. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:41 UTC |
8b2e766 | David Brownell | 05 July 2006, 09:38:56 UTC | USB: AT91 UDC updates, mostly power management UDC updates for AT91 series processors: - Get ready for at91sam926x processors (ARMv5tej not ARMv4t) - Suspend/resume support now behaves properly - In "standby" mode, UDC can be a source of system wakeup events (host resume, device connect/disconnect, etc) - Fix IRQ storming issues, seemingly related to clock disabling changes that went in a while back And minor cleanups, especially whitespace. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 02 August 2006, 23:41:41 UTC |
e55ce45 | Zou Nan hai | 25 July 2006, 23:36:40 UTC | [IA64] Don't alloc empty frame in ia64_switch_mode_phys I think ia64_switch_mode_phys and ia64_switch_mode_virt does not need to alloc an empty frame. An empty frame is required by loadrs but flushrs does not need that. Signed-off-by: Zou Nan hai <nanhai.zou@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 02 August 2006, 23:13:17 UTC |
acb15c8 | Zou Nan hai | 25 July 2006, 23:26:51 UTC | [IA64] Do not assume output registers be reservered. We found an issue in pal.S. According to the software runtime SPEC, The caller's output registers do not need to be preserved for caller. The callee may reuse input registers for any other purpose within the procedure. in ia64_pal_call_phys_stacked, input registers are copied to output registers before call into ia64_switch_mode_phys, then used to call into PAL. This assumes output registers are preserved in ia64_switch_mode_phys, which may not be true. In this particular case, ia64_switch_mode_phys alloc a null frame , and mask off psr.i. If an interrupt comes at this small window, or an MCA comes inside the procedure, output registers maybe changed, then the pal call may got some staled input registers. This patch moves the copies from input to output after ia64_switch_mode_phys to follow the software runtime convention. It also removed some unused labels in ia64_pal_call_phys_stacked. Signed-off-by: Zou Nan hai <nanhai.zou@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 02 August 2006, 23:12:08 UTC |
c7c1742 | Greg Edwards | 28 July 2006, 15:03:55 UTC | [IA64] add platform check to snsc driver init Add a platform check to the snsc driver init function, to prevent loading on non-sn2 systems. Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 02 August 2006, 23:07:55 UTC |
e037cda | Keith Owens | 17 July 2006, 05:41:59 UTC | [IA64] sparse cleanups Fix some sparse warnings on ia64. Large constants that should be long instead of int. Use NULL instead of 0. Add some missing __iomem casts. Replace a non-C99 structure assignment. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 02 August 2006, 23:03:44 UTC |
29bbd72 | Alexey Dobriyan | 02 August 2006, 22:02:31 UTC | [NET]: Fix more per-cpu typos Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 02 August 2006, 22:02:31 UTC |