| 8ba7451 | Linus Torvalds | 14 February 2014, 20:48:46 UTC | Merge branch 'for-3.14' of git://linux-nfs.org/~bfields/linux Pull two nfsd bugfixes from Bruce Fields. * 'for-3.14' of git://linux-nfs.org/~bfields/linux: lockd: send correct lock when granting a delayed lock. nfsd4: fix acl buffer overrun | 14 February 2014, 20:48:46 UTC |
| bd3813d | Linus Torvalds | 14 February 2014, 20:48:16 UTC | Merge tag 'md/3.14-fixes' of git://neil.brown.name/md Pull md fixes from Neil Brown: "Two bugfixes for md both tagged for -stable" * tag 'md/3.14-fixes' of git://neil.brown.name/md: md/raid5: Fix CPU hotplug callback registration md/raid1: restore ability for check and repair to fix read errors. | 14 February 2014, 20:48:16 UTC |
| c1b8ae0 | Linus Torvalds | 14 February 2014, 19:10:49 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Paolo Bonzini: "A small error handling problem and a compile breakage for ARM64" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm64: KVM: Add VGIC device control for arm64 KVM: return an error code in kvm_vm_ioctl_register_coalesced_mmio() | 14 February 2014, 19:10:49 UTC |
| 161aa77 | Linus Torvalds | 14 February 2014, 19:09:11 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A collection of small fixes: - There still seem to be problems with asm goto which requires the empty asm hack. - If SMAP is disabled at compile time, don't enable it nor try to interpret a page fault as an SMAP violation. - Fix a case of unbounded recursion while tracing" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, smap: smap_violation() is bogus if CONFIG_X86_SMAP is off x86, smap: Don't enable SMAP if CONFIG_X86_SMAP is disabled compiler/gcc4: Make quirk for asm_volatile_goto() unconditional x86: Use preempt_disable_notrace() in cycles_2_ns() | 14 February 2014, 19:09:11 UTC |
| eef445e | Linus Torvalds | 14 February 2014, 19:07:29 UTC | Merge tag 'pm+acpi-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These include a fix for a recent intel_pstate regression, a fix for a regression in the ACPI-based PCI hotplug (ACPIPHP) code introduced during the 3.12 cycle, fixes for two bugs in the ACPI core introduced recently and a MAINTAINERS update related to cpufreq. Specifics: - Fix for a recent regression in the intel_pstate driver that introduced a race condition causing systems to crash during initialization in some situations. This removes the affected code altogether. From Dirk Brandewie. - ACPIPHP fix for a regression introduced during the 3.12 cycle causing devices to be dropped as a result of bus check notifications after system resume on some systems due to the way ACPIPHP interprets _STA return values (arguably incorrectly). From Mika Westerberg. - ACPI dock driver fix for a problem causing docking to fail due to a check that always fails after recent ACPI core changes (found by code inspection). - ACPI container driver fix to prevent memory from being leaked in an error code path after device_register() failures. - Update of the arm_big_little cpufreq driver maintainer's e-mail address" * tag 'pm+acpi-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: MAINTAINERS / cpufreq: update Sudeep's email address intel_pstate: Remove energy reporting from pstate_sample tracepoint ACPI / container: Fix error code path in container_device_attach() ACPI / hotplug / PCI: Relax the checking of _STA return values ACPI / dock: Use acpi_device_enumerated() to check if dock is present | 14 February 2014, 19:07:29 UTC |
| 3bd354a | Linus Torvalds | 14 February 2014, 19:05:41 UTC | Merge tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fixes from Borislav Petkov: "Fix polling timeout setting through sysfs. You're surely wondering why the patches are not based on an rc. Well, Andrew sent you 79040cad3f82 ("drivers/edac/edac_mc_sysfs.c: poll timeout cannot be zero sent you") already (it got in in -rc2) but it is not enough as a fix because for one, setting too low polling intervals (< 1sec) don't make any sense and cause unnecessary polling load on the system. Then, even if we set some interval, we explode with [ 4143.094342] WARNING: CPU: 1 PID: 0 at kernel/workqueue.c:1393 __queue_work+0x1d7/0x340() because the workqueue setup path is used also for the timeout period resetting and we're doing INIT_DELAYED_WORK() on an already active workqueue. Which is total bollocks. So this is taken care of by the second patch. I've CCed stable for those two" * tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Correct workqueue setup path EDAC: Poll timeout cannot be zero, p2 | 14 February 2014, 19:05:41 UTC |
| cbc2525 | Linus Torvalds | 14 February 2014, 19:04:54 UTC | Merge tag 'fbdev-fixes-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: "Minor fbdev fixes for 3.14" * tag 'fbdev-fixes-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: video: Kconfig: Allow more broad selection of the imxfb framebuffer driver. video: exynos: Fix S6E8AX0 LCD driver build error OMAPDSS: fix fck field types OMAPDSS: DISPC: decimation rounding fix | 14 February 2014, 19:04:54 UTC |
| 5e57dc8 | Linus Torvalds | 14 February 2014, 18:45:18 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block IO fixes from Jens Axboe: "Second round of updates and fixes for 3.14-rc2. Most of this stuff has been queued up for a while. The notable exception is the blk-mq changes, which are naturally a bit more in flux still. The pull request contains: - Two bug fixes for the new immutable vecs, causing crashes with raid or swap. From Kent. - Various blk-mq tweaks and fixes from Christoph. A fix for integrity bio's from Nic. - A few bcache fixes from Kent and Darrick Wong. - xen-blk{front,back} fixes from David Vrabel, Matt Rushton, Nicolas Swenson, and Roger Pau Monne. - Fix for a vec miscount with integrity vectors from Martin. - Minor annotations or fixes from Masanari Iida and Rashika Kheria. - Tweak to null_blk to do more normal FIFO processing of requests from Shlomo Pongratz. - Elevator switching bypass fix from Tejun. - Softlockup in blkdev_issue_discard() fix when !CONFIG_PREEMPT from me" * 'for-linus' of git://git.kernel.dk/linux-block: (31 commits) block: add cond_resched() to potentially long running ioctl discard loop xen-blkback: init persistent_purge_work work_struct blk-mq: pair blk_mq_start_request / blk_mq_requeue_request blk-mq: dont assume rq->errors is set when returning an error from ->queue_rq block: Fix cloning of discard/write same bios block: Fix type mismatch in ssize_t_blk_mq_tag_sysfs_show blk-mq: rework flush sequencing logic null_blk: use blk_complete_request and blk_mq_complete_request virtio_blk: use blk_mq_complete_request blk-mq: rework I/O completions fs: Add prototype declaration to appropriate header file include/linux/bio.h fs: Mark function as static in fs/bio-integrity.c block/null_blk: Fix completion processing from LIFO to FIFO block: Explicitly handle discard/write same segments block: Fix nr_vecs for inline integrity vectors blk-mq: Add bio_integrity setup to blk_mq_make_request blk-mq: initialize sg_reserved_size blk-mq: handle dma_drain_size blk-mq: divert __blk_put_request for MQ ops blk-mq: support at_head inserations for blk_execute_rq ... | 14 February 2014, 18:45:18 UTC |
| 0d25e36 | Linus Torvalds | 14 February 2014, 18:34:30 UTC | Merge tag 'sound-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Again only fixes for HD-audio: - regression fixes due to the modularization - a few fixups for Dell, Sony and HP laptops - a revert of the previous fix as it leads to another regression" * tag 'sound-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: Revert "ALSA: hda/realtek - Avoid invalid COEFs for ALC271X" ALSA: hda - Fix undefined symbol due to builtin/module mixup ALSA: hda - Fix mic capture on Sony VAIO Pro 11 ALSA: hda - Add a headset quirk for Dell XPS 13 ALSA: hda - Fix inconsistent Mic mute LED ALSA: hda - Fix leftover ifdef checks after modularization | 14 February 2014, 18:34:30 UTC |
| e847882 | Linus Torvalds | 14 February 2014, 18:33:45 UTC | Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull RDMA/InfiniBand fixes from Roland Dreier: - Fix some rough edges from the "IP addressing for IBoE" merge - Other misc fixes, mostly to hardware drivers * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (21 commits) RDMA/ocrdma: Fix load time panic during GID table init RDMA/ocrdma: Fix traffic class shift IB/iser: Fix use after free in iser_snd_completion() IB/iser: Avoid dereferencing iscsi_iser conn object when not bound to iser connection IB/usnic: Fix smatch endianness error IB/mlx5: Remove dependency on X86 mlx5: Add include of <linux/slab.h> because of kzalloc()/kfree() use IB/qib: Add missing serdes init sequence RDMA/cxgb4: Add missing neigh_release in LE-Workaround path IB: Report using RoCE IP based gids in port caps IB/mlx4: Build the port IBoE GID table properly under bonding IB/mlx4: Do IBoE GID table resets per-port IB/mlx4: Do IBoE locking earlier when initializing the GID table IB/mlx4: Move rtnl locking to the right place IB/mlx4: Make sure GID index 0 is always occupied IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device RDMA/amso1100: Fix error return code RDMA/nes: Fix error return code IB/mlx5: Don't set "block multicast loopback" capability IB/mlx5: Fix binary compatibility with libmlx5 ... | 14 February 2014, 18:33:45 UTC |
| 8564358 | Linus Torvalds | 14 February 2014, 18:33:13 UTC | Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix arithmetic overflow in ntc_thermistor driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ntc_thermistor) Avoid math overflow | 14 February 2014, 18:33:13 UTC |
| 0a33d88 | Linus Torvalds | 14 February 2014, 18:32:28 UTC | Merge tag 'for-v3.14-fixes' of git://git.infradead.org/battery-2.6 Pull battery fixes from Dmitry Eremin-Solenikov: - Fix NULL pointer dereference in max17040 driver - Add bq2415x dts bindings documentation - Fix misleading comment in ds2782 driver - Remove useless check in isp1704 charger driver. * tag 'for-v3.14-fixes' of git://git.infradead.org/battery-2.6: power: max17040: Fix NULL pointer dereference when there is no platform_data dt: binding documentation for bq2415x charger isp1704_charger: remove useless check in isp1704_charger_probe() power: ds2782_battery: Typo in comment | 14 February 2014, 18:32:28 UTC |
| c945938 | Roland Dreier | 14 February 2014, 17:49:12 UTC | Merge branches 'cma', 'cxgb4', 'iser', 'misc', 'mlx4', 'mlx5', 'nes', 'ocrdma', 'qib' and 'usnic' into for-next | 14 February 2014, 17:49:12 UTC |
| 09de3f1 | Devesh Sharma | 04 February 2014, 06:40:48 UTC | RDMA/ocrdma: Fix load time panic during GID table init We should use rdma_vlan_dev_real_dev() instead of using vlan_dev_real_dev() when building the GID table for a vlan interface. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 14 February 2014, 17:49:04 UTC |
| a61d93d | Devesh Sharma | 10 February 2014, 08:18:58 UTC | RDMA/ocrdma: Fix traffic class shift Use correct value for obtaining traffic class from device response for Query QP request. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 14 February 2014, 17:49:00 UTC |
| fd8b48b | Dan Carpenter | 29 January 2014, 13:18:51 UTC | IB/iser: Fix use after free in iser_snd_completion() We use "tx_desc" again after we free it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 14 February 2014, 17:48:09 UTC |
| 7d9eacf | Roi Dayan | 04 February 2014, 14:54:54 UTC | IB/iser: Avoid dereferencing iscsi_iser conn object when not bound to iser connection Fix a possible NULL pointer dereference in disconnection flow. This can happen if the target disconnected/rejected the connection request, e.g before the binding stage between iscsi connection to the transport connection. Signed-off-by: Alex Tabachnik <alext@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 14 February 2014, 17:48:03 UTC |
| f809309 | Upinder Malhi | 23 January 2014, 22:38:04 UTC | IB/usnic: Fix smatch endianness error Error reported at http://marc.info/?l=linux-rdma&m=138995755801039&w=2 Fix short to int cast for big endian systems. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 14 February 2014, 17:47:29 UTC |
| 2a2f3e2 | Christoffer Dall | 02 February 2014, 21:41:02 UTC | arm64: KVM: Add VGIC device control for arm64 This fixes the build breakage introduced by c07a0191ef2de1f9510f12d1f88e3b0b5cd8d66f and adds support for the device control API and save/restore of the VGIC state for ARMv8. The defines were simply missing from the arm64 header files and uaccess.h must be implicitly imported from somewhere else on arm. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 14 February 2014, 10:09:49 UTC |
| cb6ef42 | Borislav Petkov | 12 February 2014, 17:15:00 UTC | EDAC: Correct workqueue setup path We're using edac_mc_workq_setup() both on the init path, when we load an edac driver and when we change the polling period (edac_mc_reset_delay_period) through /sys/.../edac_mc_poll_msec. On that second path we don't need to init the workqueue which has been initialized already. Thanks to Tejun for workqueue insights. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com Cc: <stable@vger.kernel.org> | 14 February 2014, 09:40:47 UTC |
| 9da21b1 | Borislav Petkov | 03 February 2014, 20:05:13 UTC | EDAC: Poll timeout cannot be zero, p2 Sanitize code even more to accept unsigned longs only and to not allow polling intervals below 1 second as this is unnecessary and doesn't make much sense anyway for polling errors. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com Cc: Doug Thompson <dougthompson@xmission.com> Cc: <stable@vger.kernel.org> | 14 February 2014, 09:40:29 UTC |
| b359bb0 | Denis Carikli | 22 January 2014, 17:09:36 UTC | video: Kconfig: Allow more broad selection of the imxfb framebuffer driver. Without that patch, a user can't select the imxfb driver when the i.MX25 and/or the i.MX27 device tree board are selected and that no boards that selects IMX_HAVE_PLATFORM_IMX_FB are compiled in. Cc: Eric Bénard <eric@eukrea.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> | 14 February 2014, 08:44:52 UTC |
| 31d6af2 | Sachin Kamat | 12 February 2014, 09:49:43 UTC | video: exynos: Fix S6E8AX0 LCD driver build error Enable S6E8AX0 LCD driver only if LCD_CLASS_DEVICE is a built-in driver. Else we get the following errors due to missing symbols: drivers/built-in.o: In function `s6e8ax0_probe': :(.text+0x51aec): undefined reference to `lcd_device_register' :(.text+0x51c44): undefined reference to `lcd_device_unregister' Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> | 14 February 2014, 08:44:51 UTC |
| 0861565 | Eli Cohen | 13 February 2014, 23:29:49 UTC | IB/mlx5: Remove dependency on X86 Remove Kconfig dependency of mlx5_ib/mlx5_core on X86, since there is no such dependency in reality. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Roland Dreier <roland@purestorage.com> | 14 February 2014, 04:48:02 UTC |
| 6ecde51 | Roland Dreier | 14 February 2014, 04:45:17 UTC | mlx5: Add include of <linux/slab.h> because of kzalloc()/kfree() use On some architectures (for example, arm), we don't end up indirectly pulling in the declaration of kzalloc() and kfree(), and so building anything that includes <linux/mlx5/driver.h> breaks. Fix this by adding an explicit include to get the declaration. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 14 February 2014, 04:48:02 UTC |
| d3d89c4 | Doug Anderson | 13 February 2014, 22:39:34 UTC | hwmon: (ntc_thermistor) Avoid math overflow The ntc thermistor code was doing math whose temporary result might have overflowed 32-bits. We need some casts in there to make it safe. In one example I found: - pullup_uV: 1800000 - result of iio_read_channel_raw: 3226 - 1800000 * 3226 => 0x15a1cbc80 Signed-off-by: Doug Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 14 February 2014, 03:43:52 UTC |
| 2f75e12 | Mike Marciniszyn | 12 February 2014, 16:54:15 UTC | IB/qib: Add missing serdes init sequence Research has shown that commit a77fcf895046 ("IB/qib: Use a single txselect module parameter for serdes tuning") missed a key serdes init sequence. This patch add that sequence. Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 13 February 2014, 22:52:44 UTC |
| 0f01320 | Kumar Sanghvi | 06 February 2014, 10:30:16 UTC | RDMA/cxgb4: Add missing neigh_release in LE-Workaround path Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 13 February 2014, 22:46:40 UTC |
| b4a26a2 | Moni Shoua | 09 February 2014, 09:54:34 UTC | IB: Report using RoCE IP based gids in port caps For userspace RoCE UD QPs we need to know the GID format that the kernel uses, e.g when working over older kernels. For that end, add a new port capability IB_PORT_IP_BASED_GIDS and report it when query port is issued. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 13 February 2014, 22:46:03 UTC |
| ad4885d | Moni Shoua | 05 February 2014, 13:13:02 UTC | IB/mlx4: Build the port IBoE GID table properly under bonding When scanning netdevices we need to check a few more conditions and cases to build the IBoE GID table properly. For example, under bonding we must make sure that when a port is down, the bond IP address isn't programmed as a GID, since doing so will cause failure with IB core flows that selects ports by GID. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 13 February 2014, 22:31:09 UTC |
| 5071456 | Moni Shoua | 05 February 2014, 13:13:01 UTC | IB/mlx4: Do IBoE GID table resets per-port The IBoE code used to reset the GID table did it for all Ethernet ports of the device. Since the whole architecture of generating GIDs and responding to events is port-based, this is inefficient and can lead to wrong content in the GID table. Change the reset flow to be per-port. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 13 February 2014, 22:31:08 UTC |
| ddf8bd3 | Moni Shoua | 05 February 2014, 13:13:00 UTC | IB/mlx4: Do IBoE locking earlier when initializing the GID table Updating the GID table under IBoE requires read/write from/to shared data structures. These data structures are protected with the device iboe lock. The flows that modify the GID table start from 1. Initializing the GID table 2. NETDEV events 3. INET or INET6 events This patch makes sure that the flow of initializing the GID table is consistent with the other two flows w.r.t on what step the lock is taken. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 13 February 2014, 22:31:08 UTC |
| 4ce5a57 | Moni Shoua | 05 February 2014, 13:12:59 UTC | IB/mlx4: Move rtnl locking to the right place On the one hand, the invocation of netdev_master_upper_dev_get() within mlx4_ib_scan_netdevs() must be done with rtnl lock held. On the other hand, it's wrong to call rtnl_lock() from within this function since it's also called by our netdev notifier callback. Therefore move the locking to mlx4_ib_add() so that both cases are covered. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 13 February 2014, 22:31:08 UTC |
| acc4fcc | Moni Shoua | 05 February 2014, 13:12:58 UTC | IB/mlx4: Make sure GID index 0 is always occupied Make sure that for Ethernet ports, the port GID table index 0 is always occupied with a default GID of the relevant IPv6 link-local adderss. This provides better user experience for legacy applications that don't use the RDMA CM and were working on index 0 prior to the IP addressing change. Also, as GIDs are generated from IP addresses of the network devices that are associated with the port, it's basically possible that the GID table will be empty if no IP address was assigned. This doesn't comply with the IB spec section 4.1.1 "GID usage and properties". Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 13 February 2014, 22:31:08 UTC |
| 2ec197d | NeilBrown | 07 February 2014, 06:10:26 UTC | lockd: send correct lock when granting a delayed lock. If an NFS client attempts to get a lock (using NLM) and the lock is not available, the server will remember the request and when the lock becomes available it will send a GRANT request to the client to provide the lock. If the client already held an adjacent lock, the GRANT callback will report the union of the existing and new locks, which can confuse the client. This happens because __posix_lock_file (called by vfs_lock_file) updates the passed-in file_lock structure when adjacent or over-lapping locks are found. To avoid this problem we take a copy of the two fields that can be changed (fl_start and fl_end) before the call and restore them afterwards. An alternate would be to allocate a 'struct file_lock', initialise it, use locks_copy_lock() to take a copy, then locks_release_private() after the vfs_lock_file() call. But that is a lot more work. Reported-by: Olaf Kirch <okir@suse.com> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> -- v1 had a couple of issues (large on-stack struct and didn't really work properly). This version is much better tested. Signed-off-by: J. Bruce Fields <bfields@redhat.com> | 13 February 2014, 19:55:02 UTC |
| 4196670 | Matan Barak | 02 February 2014, 15:06:47 UTC | IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device When the device has only Ethernet ports, don't try to allocate range of steerable UD QPs since they aren't needed. This fixes an issue where mlx4 VFs tried to allocate a range of UD steerable QPs, but failed to do so. Fixes: c1c98501121e ("IB/mlx4: Add support for steerable IB UD QPs") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 13 February 2014, 17:00:18 UTC |
| 4640c7e | H. Peter Anvin | 13 February 2014, 15:46:04 UTC | x86, smap: smap_violation() is bogus if CONFIG_X86_SMAP is off If CONFIG_X86_SMAP is disabled, smap_violation() tests for conditions which are incorrect (as the AC flag doesn't matter), causing spurious faults. The dynamic disabling of SMAP (nosmap on the command line) is fine because it disables X86_FEATURE_SMAP, therefore causing the static_cpu_has() to return false. Found by Fengguang Wu's test system. [ v3: move all predicates into smap_violation() ] [ v2: use IS_ENABLED() instead of #ifdef ] Reported-by: Fengguang Wu <fengguang.wu@intel.com> Link: http://lkml.kernel.org/r/20140213124550.GA30497@localhost Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> # v3.7+ | 13 February 2014, 16:40:52 UTC |
| 03bbd59 | H. Peter Anvin | 13 February 2014, 15:34:30 UTC | x86, smap: Don't enable SMAP if CONFIG_X86_SMAP is disabled If SMAP support is not compiled into the kernel, don't enable SMAP in CR4 -- in fact, we should clear it, because the kernel doesn't contain the proper STAC/CLAC instructions for SMAP support. Found by Fengguang Wu's test system. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Link: http://lkml.kernel.org/r/20140213124550.GA30497@localhost Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> # v3.7+ | 13 February 2014, 15:50:25 UTC |
| a9f1803 | Steven Noonan | 13 February 2014, 07:01:07 UTC | compiler/gcc4: Make quirk for asm_volatile_goto() unconditional I started noticing problems with KVM guest destruction on Linux 3.12+, where guest memory wasn't being cleaned up. I bisected it down to the commit introducing the new 'asm goto'-based atomics, and found this quirk was later applied to those. Unfortunately, even with GCC 4.8.2 (which ostensibly fixed the known 'asm goto' bug) I am still getting some kind of miscompilation. If I enable the asm_volatile_goto quirk for my compiler, KVM guests are destroyed correctly and the memory is cleaned up. So make the quirk unconditional for now, until bug is found and fixed. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Noonan <steven@uplinklabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1392274867-15236-1-git-send-email-steven@uplinklabs.net Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 Signed-off-by: Ingo Molnar <mingo@kernel.org> | 13 February 2014, 11:34:05 UTC |
| 789b5e0 | Oleg Nesterov | 05 February 2014, 22:12:45 UTC | md/raid5: Fix CPU hotplug callback registration Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Interestingly, the raid5 code can actually prevent double initialization and hence can use the following simplified form of callback registration: register_cpu_notifier(&foobar_cpu_notifier); get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); put_online_cpus(); A hotplug operation that occurs between registering the notifier and calling get_online_cpus(), won't disrupt anything, because the code takes care to perform the memory allocations only once. So reorganize the code in raid5 this way to fix the deadlock with callback registration. Cc: linux-raid@vger.kernel.org Cc: stable@vger.kernel.org (v2.6.32+) Fixes: 36d1c6476be51101778882897b315bd928c8c7b5 Signed-off-by: Oleg Nesterov <oleg@redhat.com> [Srivatsa: Fixed the unregister_cpu_notifier() deadlock, added the free_scratch_buffer() helper to condense code further and wrote the changelog.] Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NeilBrown <neilb@suse.de> | 13 February 2014, 02:46:45 UTC |
| 465e5fc | Rafael J. Wysocki | 13 February 2014, 01:12:41 UTC | Merge branch 'pm-cpufreq' * pm-cpufreq: MAINTAINERS / cpufreq: update Sudeep's email address intel_pstate: Remove energy reporting from pstate_sample tracepoint | 13 February 2014, 01:12:41 UTC |
| 171d0ba | Sudeep Holla | 11 February 2014, 11:42:32 UTC | MAINTAINERS / cpufreq: update Sudeep's email address Though my old email address continues to work as alias, updating to the new address as it's shorter, easier and more appropriate. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 13 February 2014, 01:11:32 UTC |
| 709c078 | Dirk Brandewie | 12 February 2014, 18:01:03 UTC | intel_pstate: Remove energy reporting from pstate_sample tracepoint Remove the reporting of energy since it does not provide any useful information about the state of the driver and will be a maintainance headache going forward since the RAPL energy units register is not architectural and subject to change between micro-architectures References: https://bugzilla.kernel.org/show_bug.cgi?id=69831 Fixes: b69880f9ccf7 (intel_pstate: Add trace point to report internal state.) Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 13 February 2014, 01:11:18 UTC |
| 4675348 | Linus Torvalds | 12 February 2014, 20:28:05 UTC | Merge tag 'stable/for-linus-3.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bugfixes from Konrad Rzeszutek Wilk: "This has an healthy amount of code being removed - which we do not use anymore (the only user of it was ia64 Xen which had been removed already). The other bug-fixes are to make Xen ARM be able to use the new event channel mechanism and proper export of header files to user-space. Summary: - Fix ARM and Xen FIFO not working. - Remove more Xen ia64 vestigates. - Fix UAPI missing Xen files" * tag 'stable/for-linus-3.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: ia64/xen: Remove Xen support for ia64 even more xen: install xen/gntdev.h and xen/gntalloc.h xen/events: bind all new interdomain events to VCPU0 | 12 February 2014, 20:28:05 UTC |
| ab57662 | Julia Lawall | 29 December 2013, 22:47:29 UTC | RDMA/amso1100: Fix error return code Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Roland Dreier <roland@purestorage.com> | 12 February 2014, 19:11:46 UTC |
| d07875b | Julia Lawall | 29 December 2013, 22:47:37 UTC | RDMA/nes: Fix error return code Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Roland Dreier <roland@purestorage.com> | 12 February 2014, 19:11:09 UTC |
| 9398a10 | Linus Torvalds | 12 February 2014, 17:13:09 UTC | Merge tag 'regulator-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Two driver fixes, one fixing the mapping of interrupts on da9055 (which previously wouldn't have worked at all) and a fix for reference counting OF nodes in the max14577 driver" * tag 'regulator-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: da9055: Remove use of regmap_irq_get_virq() regulator: max14577: Add missing of_node_put | 12 February 2014, 17:13:09 UTC |
| dea054f | Linus Torvalds | 12 February 2014, 17:12:04 UTC | Merge tag 'gpio-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here are some accumulated patches with small fixes for this and that in a few GPIO drivers, and a more important fix to an #ifdef in the GPIO consumer header. Summary: - Get #ifdef's right in the <linux/gpio/consumer.h> header. - Minor fixes to tb10x, clps711x, bcm281xx, intel-mid and xtensa GPIO drivers" * tag 'gpio-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: consumer.h: Move forward declarations outside #ifdef gpio: tb10x: GPIO_TB10X needs to select GENERIC_IRQ_CHIP gpio: clps711x: Add module alias to support module auto loading gpio: bcm281xx: Update MODULE_AUTHOR gpio: intel-mid: fix the incorrect return of idle callback gpio: xtensa: fix build when XCHAL_HAVE_CP is 0 | 12 February 2014, 17:12:04 UTC |
| 7df4d0c | Linus Torvalds | 12 February 2014, 17:11:24 UTC | Merge tag 'spi-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few driver and documentation fixes, plus a fix for double error handling which had crept in due to the confusing documentation - it wasn't clear if the core or the driver was responsible for cleanup in error cases so both tried to do it with unfortunate results" * tag 'spi-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: nuc900: Set SPI_LSB_FIRST for master->mode_bits if hw->pdata->lsb is true spi: rspi: Document support for Renesas QSPI in Kconfig spi: Fix crash with double message finalisation on error handling spi: correct the transfer_one_message documentation wording spi: document the transfer_one spi_master callback spi: spi.h: clarify the documentation of transfer_one | 12 February 2014, 17:11:24 UTC |
| 641f832 | Linus Torvalds | 12 February 2014, 17:02:49 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Nothing too crazy. Radeon irq fixes, i915 regression fixes, exynos fixes, tda998x chip fixes, and a bunch of msm fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits) drm/i915: Pair va_copy with va_end in i915_error_vprintf drm/i915: Fix intel_pipe_to_cpu_transcoder for UMS drm/i915: Disable dp aux irq on g4x drm/msm: bigger synchronization hammer drm/exynos: Convert to use the standard hdmi.h header drm/exynos: Fix trivial typo drm/exynos: Remove unnecessary semicolon drm/exynos: Fix multiplatform breakage for ipp/gsc drm/exynos: Fix freeing issues in exynos_drm_drv.c drm/radeon: add missing include in btc_dpm.c drm/radeon/dpm: fix uninitialized read from stack in kv_dpm_late_enable drm/radeon: remove useless return drm/radeon/dpm: use stored max_vddc rather than looking it up drm/radeon/dpm: use the driver state for dpm debugfs drm/radeon: fix UVD IRQ support on 7xx drm/radeon: fix UVD IRQ support on SI drm/msm: fix deadlock in bo create fail path drm/msm/mdp4: cursor fixes drm/msm/mdp4: pageflip fixes drm/msm/mdp5: fix ref leaks in error paths ... | 12 February 2014, 17:02:49 UTC |
| 2078600 | Martin Kepplinger | 12 February 2014, 16:09:23 UTC | ALSA: Revert "ALSA: hda/realtek - Avoid invalid COEFs for ALC271X" This reverts commit d3c56568f43807135f2c2a09582a69f809f0d8b7. The reverted commit breaks audio through headphone line out on the Acer TravelMate B113 (Type1Sku0) Notebook, my main work machine. I don't know much about it but this fixes my problem. Bisected and tested. Fixes: d3c56568f438 ('ALSA: hda/realtek - Avoid invalid COEFs for ALC271X') Cc: <stable@vger.kernel.org> Tested-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 February 2014, 16:37:46 UTC |
| c8123f8 | Jens Axboe | 12 February 2014, 16:34:01 UTC | block: add cond_resched() to potentially long running ioctl discard loop When mkfs issues a full device discard and the device only supports discards of a smallish size, we can loop in blkdev_issue_discard() for a long time. If preempt isn't enabled, this can turn into a softlock situation and the kernel will start complaining. Add an explicit cond_resched() at the end of the loop to avoid that. Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@fb.com> | 12 February 2014, 16:36:37 UTC |
| d990ce0 | Rafael J. Wysocki | 12 February 2014, 13:56:58 UTC | Merge branches 'acpi-dock', 'acpi-scan' and 'acpi-pci-hotplug' * acpi-dock: ACPI / dock: Use acpi_device_enumerated() to check if dock is present * acpi-scan: ACPI / container: Fix error code path in container_device_attach() * acpi-pci-hotplug: ACPI / hotplug / PCI: Relax the checking of _STA return values | 12 February 2014, 13:56:58 UTC |
| 0f6aa09 | Rafael J. Wysocki | 11 February 2014, 23:52:49 UTC | ACPI / container: Fix error code path in container_device_attach() To avoid leaking memory on errors from device_register(), do a put_device() on the device object in question in the error code path of container_device_attach(). Fixes: caa73ea158de (ACPI / hotplug / driver core: Handle containers in a special way) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> | 12 February 2014, 13:55:16 UTC |
| 5c306c8 | Mark Brown | 12 February 2014, 11:47:33 UTC | Merge remote-tracking branches 'regulator/fix/da9055' and 'regulator/fix/max14577' into regulator-linus | 12 February 2014, 11:47:33 UTC |
| 7282059 | Mika Westerberg | 11 February 2014, 10:42:37 UTC | ACPI / hotplug / PCI: Relax the checking of _STA return values The ACPI specification (ACPI 5.0A, Section 6.3.7) says: _STA may return bit 0 clear (not present) with bit 3 set (device is functional). This case is used to indicate a valid device for which no device driver should be loaded (for example, a bridge device.) Children of this device may be present and valid. OSPM should continue enumeration below a device whose _STA returns this bit combination. Evidently, some BIOSes follow that and return 0x0A from _STA, which causes problems to happen when they trigger bus check or device check notifications for those devices too. Namely, ACPIPHP thinks that they are gone and may drop them, for example, if such a notification is triggered during a resume from system suspend. To fix that, modify ACPICA to regard devies as present and functioning if _STA returns both the ACPI_STA_DEVICE_ENABLED and ACPI_STA_DEVICE_FUNCTIONING bits set for them. Reported-and-tested-by: Peter Wu <lekensteyn@gmail.com> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ [rjw: Subject and changelog, minor code modifications] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 12 February 2014, 11:45:57 UTC |
| 45f7fdc | Linus Torvalds | 12 February 2014, 06:28:47 UTC | Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "Here is some powerpc goodness for -rc2. Arguably -rc1 material more than -rc2 but I was travelling (again !) It's mostly bug fixes including regressions, but there are a couple of new things that I decided to drop-in. One is a straightforward patch from Michael to add a bunch of P8 cache events to perf. The other one is a patch by myself to add the direct DMA (iommu bypass) for PCIe on Power8 for 64-bit capable devices. This has been around for a while, I had lost track of it. However it's been in our internal kernels we use for testing P8 already and it affects only P8 related code. Since P8 is still unreleased the risk is pretty much nil at this point" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/powernv: Add iommu DMA bypass support for IODA2 powerpc: Fix endian issues in kexec and crash dump code powerpc/ppc32: Fix the bug in the init of non-base exception stack for UP powerpc/xmon: Don't signal we've entered until we're finished printing powerpc/xmon: Fix timeout loop in get_output_lock() powerpc/xmon: Don't loop forever in get_output_lock() powerpc/perf: Configure BHRB filter before enabling PMU interrupts crypto/nx/nx-842: Fix handling of vmalloc addresses powerpc/pseries: Select ARCH_RANDOM on pseries powerpc/perf: Add Power8 cache & TLB events powerpc/relocate fix relocate processing in LE mode powerpc: Fix kdump hang issue on p8 with relocation on exception enabled. powerpc/pseries: Disable relocation on exception while going down during crash. powerpc/eeh: Drop taken reference to driver on eeh_rmv_device powerpc: Fix build failure in sysdev/mpic.c for MPIC_WEIRD=y | 12 February 2014, 06:28:47 UTC |
| abb97b8 | Roger Pau Monne | 12 February 2014, 03:34:03 UTC | xen-blkback: init persistent_purge_work work_struct Initialize persistent_purge_work work_struct on xen_blkif_alloc (and remove the previous initialization done in purge_persistent_gnt). This prevents flush_work from complaining even if purge_persistent_gnt has not been used. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Jens Axboe <axboe@fb.com> | 12 February 2014, 03:34:03 UTC |
| 9b244b5 | Dave Airlie | 11 February 2014, 23:51:51 UTC | Merge branch 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox into drm-next These are a number of fixes from the patch set which Jean-Francois has been working on which I think are important to be merged during -rc, and have been tested independently here. I've been in discussion with Rob, who is happy that I send these directly to you. * 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: drm/i2c: tda998x: fix the ENABLE_SPACE register drm/i2c: tda998x: set the PLL division factor in range 0..3 drm/i2c: tda998x: force the page register at startup time drm/i2c: tda998x: free the CEC device on encoder_destroy drm/i2c: tda998x: check the CEC device creation drm/i2c: tda998x: fix bad value in the AIF | 11 February 2014, 23:51:51 UTC |
| da89486 | Dave Airlie | 11 February 2014, 23:51:16 UTC | Merge tag 'drm-intel-fixes-2014-02-11' of ssh://git.freedesktop.org/git/drm-intel into drm-next 3 regression fixes in i915 * tag 'drm-intel-fixes-2014-02-11' of ssh://git.freedesktop.org/git/drm-intel: drm/i915: Pair va_copy with va_end in i915_error_vprintf drm/i915: Fix intel_pipe_to_cpu_transcoder for UMS drm/i915: Disable dp aux irq on g4x | 11 February 2014, 23:51:16 UTC |
| bbb1955 | Linus Torvalds | 11 February 2014, 20:37:35 UTC | Merge tag 'dt-fixes-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - Fix compile error drivers/spi/spi-rspi.c with !CONFIG_OF - Fix warnings for unused/uninitialized variables with !CONFIG_OF - Fix PCIe bus matching for powerpc - Add documentation for various vendor strings * tag 'dt-fixes-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: DT: Add vendor prefix for Spansion Inc. of/device: Nullify match table in of_match_device() for CONFIG_OF=n dt-bindings: add vendor-prefix for neonode of: fix PCI bus match for PCIe slots of: restructure for_each macros to fix compile warnings of: add vendor prefix for Honeywell of: Update qcom vendor prefix description of: add vendor prefix for Allwinner Technology | 11 February 2014, 20:37:35 UTC |
| 738b52b | Linus Torvalds | 11 February 2014, 20:24:35 UTC | Merge tag 'microblaze-3.14-rc3' of git://git.monstr.eu/linux-2.6-microblaze Pull microblaze fixes from Michal Simek: - Fix two compilation issues - HZ, readq/writeq - Fix stack protection support * tag 'microblaze-3.14-rc3' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix a typo when disabling stack protection microblaze: Define readq and writeq IO helper function microblaze: Fix missing HZ macro | 11 February 2014, 20:24:35 UTC |
| a87af77 | Linus Torvalds | 11 February 2014, 20:23:50 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 bugfixes from Martin Schwidefsky: "A collection a bug fixes. Most of them are minor but two of them are more severe. The linkage stack bug can be used by user space to force an oops, with panic_on_oops this is a denial-of-service. And the dump memory detection issue can cause incomplete memory dumps" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: improve cio_commit_config s390: fix kernel crash due to linkage stack instructions s390/dump: Fix dump memory detection s390/appldata: restore missing init_virt_timer() s390/qdio: correct program-controlled interruption checking s390/qdio: for_each macro correctness | 11 February 2014, 20:23:50 UTC |
| 16e5a2e | Linus Torvalds | 11 February 2014, 20:05:55 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking updates from David Miller: 1) Fix flexcan build on big endian, from Arnd Bergmann 2) Correctly attach cpsw to GPIO bitbang MDIO drive, from Stefan Roese 3) udp_add_offload has to use GFP_ATOMIC since it can be invoked from non-sleepable contexts. From Or Gerlitz 4) vxlan_gro_receive() does not iterate over all possible flows properly, fix also from Or Gerlitz 5) CAN core doesn't use a proper SKB destructor when it hooks up sockets to SKBs. Fix from Oliver Hartkopp 6) ip_tunnel_xmit() can use an uninitialized route pointer, fix from Eric Dumazet 7) Fix address family assignment in IPVS, from Michal Kubecek 8) Fix ath9k build on ARM, from Sujith Manoharan 9) Make sure fail_over_mac only applies for the correct bonding modes, from Ding Tianhong 10) The udp offload code doesn't use RCU correctly, from Shlomo Pongratz 11) Handle gigabit features properly in generic PHY code, from Florian Fainelli 12) Don't blindly invoke link operations in rtnl_link_get_slave_info_data_size, they are optional. Fix from Fernando Luis Vazquez Cao 13) Add USB IDs for Netgear Aircard 340U, from Bjørn Mork 14) Handle netlink packet padding properly in openvswitch, from Thomas Graf 15) Fix oops when deleting chains in nf_tables, from Patrick McHardy 16) Fix RX stalls in xen-netback driver, from Zoltan Kiss 17) Fix deadlock in mac80211 stack, from Emmanuel Grumbach 18) inet_nlmsg_size() forgets to consider ifa_cacheinfo, fix from Geert Uytterhoeven 19) tg3_change_mtu() can deadlock, fix from Nithin Sujir 20) Fix regression in setting SCTP local source addresses on accepted sockets, caused by some generic ipv6 socket changes. Fix from Matija Glavinic Pecotic 21) IPPROTO_* must be pure defines, otherwise module aliases don't get constructed properly. Fix from Jan Moskyto 22) IPV6 netconsole setup doesn't work properly unless an explicit source address is specified, fix from Sabrina Dubroca 23) Use __GFP_NORETRY for high order skb page allocations in sock_alloc_send_pskb and skb_page_frag_refill. From Eric Dumazet 24) Fix a regression added in netconsole over bridging, from Cong Wang 25) TCP uses an artificial offset of 1ms for SRTT, but this doesn't jive well with TCP pacing which needs the SRTT to be accurate. Fix from Eric Dumazet 26) Several cases of missing header file includes from Rashika Kheria 27) Add ZTE MF667 device ID to qmi_wwan driver, from Raymond Wanyoike 28) TCP Small Queues doesn't handle nonagle properly in some corner cases, fix from Eric Dumazet 29) Remove extraneous read_unlock in bond_enslave, whoops. From Ding Tianhong 30) Fix 9p trans_virtio handling of vmalloc buffers, from Richard Yao * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (136 commits) 6lowpan: fix lockdep splats alx: add missing stats_lock spinlock init 9p/trans_virtio.c: Fix broken zero-copy on vmalloc() buffers bonding: remove unwanted bond lock for enslave processing USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support tcp: tsq: fix nonagle handling bridge: Prevent possible race condition in br_fdb_change_mac_address bridge: Properly check if local fdb entry can be deleted when deleting vlan bridge: Properly check if local fdb entry can be deleted in br_fdb_delete_by_port bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address bridge: Fix the way to check if a local fdb entry can be deleted bridge: Change local fdb entries whenever mac address of bridge device changes bridge: Fix the way to find old local fdb entries in br_fdb_change_mac_address bridge: Fix the way to insert new local fdb entries in br_fdb_changeaddr bridge: Fix the way to find old local fdb entries in br_fdb_changeaddr tcp: correct code comment stating 3 min timeout for FIN_WAIT2, we only do 1 min net: vxge: Remove unused device pointer net: qmi_wwan: add ZTE MF667 3c59x: Remove unused pointer in vortex_eisa_cleanup() net: fix 'ip rule' iif/oif device rename ... | 11 February 2014, 20:05:55 UTC |
| 09bdc2d | J. Bruce Fields | 11 February 2014, 16:29:05 UTC | nfsd4: fix acl buffer overrun 4ac7249ea5a0ceef9f8269f63f33cc873c3fac61 "nfsd: use get_acl and ->set_acl" forgets to set the size in the case get_acl() succeeds, so _posix_to_nfsv4_one() can then write past the end of its allocation. Symptoms were slab corruption warnings. Also, some minor cleanup while we're here. (Among other things, note that the first few lines guarantee that pacl is non-NULL.) Signed-off-by: J. Bruce Fields <bfields@redhat.com> | 11 February 2014, 18:48:11 UTC |
| 49f5baa | Christoph Hellwig | 11 February 2014, 16:27:14 UTC | blk-mq: pair blk_mq_start_request / blk_mq_requeue_request Make sure we have a proper pairing between starting and requeueing requests. Move the dma drain and REQ_END setup into blk_mq_start_request, and make sure blk_mq_requeue_request properly undoes them, giving us a pair of function to prepare and unprepare a request without leaving side effects. Together this ensures we always clean up properly after BLK_MQ_RQ_QUEUE_BUSY returns from ->queue_rq. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com> | 11 February 2014, 16:34:08 UTC |
| 1e93b8c | Christoph Hellwig | 11 February 2014, 16:27:13 UTC | blk-mq: dont assume rq->errors is set when returning an error from ->queue_rq rq->errors never has been part of the communication protocol between drivers and the block stack and most drivers will not have initialized it. Return -EIO to upper layers when the driver returns BLK_MQ_RQ_QUEUE_ERROR unconditionally. If a driver want to return a different error it can easily do so by returning success after calling blk_mq_end_io itself. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com> | 11 February 2014, 16:34:07 UTC |
| 8423ae3 | Kent Overstreet | 11 February 2014, 01:45:50 UTC | block: Fix cloning of discard/write same bios Immutable biovecs changed the way bio segments are treated in such a way that bio_for_each_segment() cannot now do what we want for discard/write same bios, since bi_size means something completely different for them. Fortunately discard and write same bios never have more than a single biovec, so bio_for_each_segment() is unnecessary and not terribly meaningful for them, but we still have to special case them in a few places. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com> | 11 February 2014, 15:40:45 UTC |
| d8320b2 | Paul Bolle | 08 February 2014, 22:35:43 UTC | ia64/xen: Remove Xen support for ia64 even more Commit d52eefb47d4e ("ia64/xen: Remove Xen support for ia64") removed the Kconfig symbol XEN_XENCOMM. But it didn't remove the code depending on that symbol. Remove that code now. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> | 11 February 2014, 15:12:37 UTC |
| 564eb71 | David Vrabel | 10 February 2014, 13:54:02 UTC | xen: install xen/gntdev.h and xen/gntalloc.h xen/gntdev.h and xen/gntalloc.h both provide userspace ABIs so they should be installed. CC: stable@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> | 11 February 2014, 15:12:36 UTC |
| 97253ee | David Vrabel | 05 February 2014, 14:13:10 UTC | xen/events: bind all new interdomain events to VCPU0 Commit fc087e10734a4d3e40693fc099461ec1270b3fff (xen/events: remove unnecessary init_evtchn_cpu_bindings()) causes a regression. The kernel-side VCPU binding was not being correctly set for newly allocated or bound interdomain events. In ARM guests where 2-level events were used, this would result in no interdomain events being handled because the kernel-side VCPU masks would all be clear. x86 guests would work because the irq affinity was set during irq setup and this would set the correct kernel-side VCPU binding. Fix this by properly initializing the kernel-side VCPU binding in bind_evtchn_to_irq(). Reported-and-tested-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> | 11 February 2014, 15:12:34 UTC |
| c56812f | Tomi Valkeinen | 28 January 2014, 06:50:47 UTC | OMAPDSS: fix fck field types 'fck' field in dpi and sdi clock calculation struct is 'unsigned long long', even though it should be 'unsigned long'. This hasn't caused any issues so far. Fix the field's type. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> | 11 February 2014, 14:19:46 UTC |
| eec77da | Tomi Valkeinen | 27 January 2014, 09:29:53 UTC | OMAPDSS: DISPC: decimation rounding fix The driver uses DIV_ROUND_UP when calculating decimated width & height. For example, when decimating with 3, the width is calculated as: width = DIV_ROUND_UP(width, decim_x); This yields bad results for some values. For example, 800/3=266.666..., which is rounded to 267. When the input width is set to 267, and pixel increment is set to 3, this causes the dispc to read a line of 801 pixels, i.e. it reads a wrong pixel at the end of the line. Even more pressing, the above rounding causes a BUG() in pixinc(), as the value of 801 is used to calculate row increment, leading to a bad value being passed to pixinc(). This patch fixes the decimation by removing the DIV_ROUND_UP()s when calculating width and height for decimation. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> | 11 February 2014, 14:19:41 UTC |
| cf20662 | Mark Brown | 11 February 2014, 12:08:27 UTC | Merge remote-tracking branches 'spi/fix/doc', 'spi/fix/nuc900' and 'spi/fix/rspi' into spi-linus | 11 February 2014, 12:08:27 UTC |
| 797d0de | Mark Brown | 11 February 2014, 12:08:26 UTC | Merge remote-tracking branch 'spi/fix/core' into spi-linus | 11 February 2014, 12:08:26 UTC |
| 1d2cb9a | Mika Kuoppala | 07 February 2014, 15:40:50 UTC | drm/i915: Pair va_copy with va_end in i915_error_vprintf Each invocation of va_copy() must be matched by a corresponding invocation of va_end() in the same function. This regression has been introduced in commit e29bb4ebbf000ff9ac081d29784a3331618f012e Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Sep 20 10:20:59 2013 +0100 drm/i915: Use a temporary va_list for two-pass string handling Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 11 February 2014, 10:53:15 UTC |
| a2d213d | Daniel Vetter | 07 February 2014, 15:34:05 UTC | drm/i915: Fix intel_pipe_to_cpu_transcoder for UMS We don't have all the drm_crtc&co hanging around in that case. This regression has been introduced in commit 391f75e2bf13f105d9e4a120736ccdd8e3bc638b Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Sep 25 19:55:26 2013 +0300 drm/i915: Fix pre-CTG vblank counter Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=69521 Cc: stable@vger.kernel.org (for 3.13 only) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 11 February 2014, 10:53:09 UTC |
| cd15b04 | Benjamin Herrenschmidt | 11 February 2014, 00:32:38 UTC | powerpc/powernv: Add iommu DMA bypass support for IODA2 This patch adds the support for to create a direct iommu "bypass" window on IODA2 bridges (such as Power8) allowing to bypass iommu page translation completely for 64-bit DMA capable devices, thus significantly improving DMA performances. Additionally, this adds a hook to the struct iommu_table so that the IOMMU API / VFIO can disable the bypass when external ownership is requested, since in that case, the device will be used by an environment such as userspace or a KVM guest which must not be allowed to bypass translations. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 05:07:37 UTC |
| 379dd27 | Dave Airlie | 11 February 2014, 02:57:27 UTC | Merge tag 'drm-intel-fixes-2014-02-06' of ssh://git.freedesktop.org/git/drm-intel into drm-next Just minor stuff really, on vlv dp fix and two patches to tune down some opregion sanity check. Plus MAINTAINERS update for the new git repo, which is the only reason I've really bothered with this pull request. * tag 'drm-intel-fixes-2014-02-06' of ssh://git.freedesktop.org/git/drm-intel: drm/i915: demote opregion excessive timeout WARN_ONCE to DRM_INFO_ONCE drm: add DRM_INFO_ONCE() to print a one-time DRM_INFO() message MAINTAINERS: Update drm/i915 git repo drm/i915: vlv: fix DP PHY lockup due to invalid PP sequencer setup | 11 February 2014, 02:57:27 UTC |
| 30d4442 | Dave Airlie | 11 February 2014, 02:56:57 UTC | Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next This pull request fixes memory leak issue in exynos_drm_open() and multiplatform breakage for ipp/gsc. And also including some cleanups. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Convert to use the standard hdmi.h header drm/exynos: Fix trivial typo drm/exynos: Remove unnecessary semicolon drm/exynos: Fix multiplatform breakage for ipp/gsc drm/exynos: Fix freeing issues in exynos_drm_drv.c | 11 February 2014, 02:56:57 UTC |
| 7431105 | Dave Airlie | 11 February 2014, 02:56:17 UTC | Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next Compared to original fixes pull req that I sent yesterday, this adds one more fix that I found for a synchronization issue which starts to crop up when we use XA in DDX for 2d accel on 3d core. In particular, accelerating presentation blit triggers this problem. * 'msm-next' of git://people.freedesktop.org/~robclark/linux: drm/msm: bigger synchronization hammer drm/msm: fix deadlock in bo create fail path drm/msm/mdp4: cursor fixes drm/msm/mdp4: pageflip fixes drm/msm/mdp5: fix ref leaks in error paths drm/msm: fix inconsequential typo | 11 February 2014, 02:56:17 UTC |
| 20e7c4e | Eric Dumazet | 10 February 2014, 19:42:35 UTC | 6lowpan: fix lockdep splats When a device ndo_start_xmit() calls again dev_queue_xmit(), lockdep can complain because dev_queue_xmit() is re-entered and the spinlocks protecting tx queues share a common lockdep class. Same issue was fixed for bonding/l2tp/ppp in commits 0daa2303028a6 ("[PATCH] bonding: lockdep annotation") 49ee49202b4ac ("bonding: set qdisc_tx_busylock to avoid LOCKDEP splat") 23d3b8bfb8eb2 ("net: qdisc busylock needs lockdep annotations ") 303c07db487be ("ppp: set qdisc_tx_busylock to avoid LOCKDEP splat ") Reported-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 February 2014, 01:51:29 UTC |
| 3e5ccc2 | John Greene | 10 February 2014, 19:34:04 UTC | alx: add missing stats_lock spinlock init Trivial fix for init time stack trace occuring in alx_get_stats64 upon start up. Should have been part of commit adding the spinlock: f1b6b106 alx: add alx_get_stats64 operation Signed-off-by: John Greene <jogreene@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 February 2014, 01:50:35 UTC |
| b6f52ae | Richard Yao | 09 February 2014, 00:32:01 UTC | 9p/trans_virtio.c: Fix broken zero-copy on vmalloc() buffers The 9p-virtio transport does zero copy on things larger than 1024 bytes in size. It accomplishes this by returning the physical addresses of pages to the virtio-pci device. At present, the translation is usually a bit shift. That approach produces an invalid page address when we read/write to vmalloc buffers, such as those used for Linux kernel modules. Any attempt to load a Linux kernel module from 9p-virtio produces the following stack. [<ffffffff814878ce>] p9_virtio_zc_request+0x45e/0x510 [<ffffffff814814ed>] p9_client_zc_rpc.constprop.16+0xfd/0x4f0 [<ffffffff814839dd>] p9_client_read+0x15d/0x240 [<ffffffff811c8440>] v9fs_fid_readn+0x50/0xa0 [<ffffffff811c84a0>] v9fs_file_readn+0x10/0x20 [<ffffffff811c84e7>] v9fs_file_read+0x37/0x70 [<ffffffff8114e3fb>] vfs_read+0x9b/0x160 [<ffffffff81153571>] kernel_read+0x41/0x60 [<ffffffff810c83ab>] copy_module_from_fd.isra.34+0xfb/0x180 Subsequently, QEMU will die printing: qemu-system-x86_64: virtio: trying to map MMIO memory This patch enables 9p-virtio to correctly handle this case. This not only enables us to load Linux kernel modules off virtfs, but also enables ZFS file-based vdevs on virtfs to be used without killing QEMU. Special thanks to both Avi Kivity and Alexander Graf for their interpretation of QEMU backtraces. Without their guidence, tracking down this bug would have taken much longer. Also, special thanks to Linus Torvalds for his insightful explanation of why this should use is_vmalloc_addr() instead of is_vmalloc_or_module_addr(): https://lkml.org/lkml/2014/2/8/272 Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 February 2014, 01:48:54 UTC |
| 6b8790b | dingtianhong | 10 February 2014, 08:33:59 UTC | bonding: remove unwanted bond lock for enslave processing The bond enslave processing don't hold bond->lock anymore, so release an unlocked rw lock will cause warning message, remove the unwanted read_unlock(&bond->lock). Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 February 2014, 00:54:29 UTC |
| 19a38d8 | Liu Junliang | 10 February 2014, 06:31:42 UTC | USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support Signed-off-by: Liu Junliang <liujunliang_ljl@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 February 2014, 00:53:06 UTC |
| ea961a8 | Anton Blanchard | 21 January 2014, 21:40:28 UTC | powerpc: Fix endian issues in kexec and crash dump code We expose a number of OF properties in the kexec and crash dump code and these need to be big endian. Cc: stable@vger.kernel.org # v3.13 Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:52 UTC |
| 04a3411 | Kevin Hao | 29 January 2014, 10:24:54 UTC | powerpc/ppc32: Fix the bug in the init of non-base exception stack for UP We would allocate one specific exception stack for each kind of non-base exceptions for every CPU. For ppc32 the CPU hard ID is used as the subscript to get the specific exception stack for one CPU. But for an UP kernel, there is only one element in the each kind of exception stack array. We would get stuck if the CPU hard ID is not equal to '0'. So in this case we should use the subscript '0' no matter what the CPU hard ID is. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:52 UTC |
| d2b496e | Michael Ellerman | 23 December 2013, 12:46:06 UTC | powerpc/xmon: Don't signal we've entered until we're finished printing Currently we set our cpu's bit in cpus_in_xmon, and then we take the output lock and print the exception information. This can race with the master cpu entering the command loop and printing the backtrace. The result is that the backtrace gets garbled with another cpu's exception print out. Fix it by delaying the set of cpus_in_xmon until we are finished printing. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:51 UTC |
| 1507589 | Michael Ellerman | 23 December 2013, 12:46:05 UTC | powerpc/xmon: Fix timeout loop in get_output_lock() As far as I can tell, our 70s era timeout loop in get_output_lock() is generating no code. This leads to the hostile takeover happening more or less simultaneously on all cpus. The result is "interesting", some example output that is more readable than most: cpu 0x1: Vector: 100 (Scypsut e0mx bR:e setV)e catto xc0p:u[ c 00 c0:0 000t0o0V0erc0td:o5 rfc28050000]0c00 0 0 0 6t(pSrycsV1ppuot uxe 1m 2 0Rx21e3:0s0ce000c00000t00)00 60602oV2SerucSayt0y 0p 1sxs Fix it by using udelay() in the timeout loop. The wait time and check frequency are arbitrary, but seem to work OK. We already rely on udelay() working so this is not a new dependency. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:51 UTC |
| 730efb6 | Michael Ellerman | 23 December 2013, 12:46:04 UTC | powerpc/xmon: Don't loop forever in get_output_lock() If we enter with xmon_speaker != 0 we skip the first cmpxchg(), we also skip the while loop because xmon_speaker != last_speaker (0) - meaning we skip the second cmpxchg() also. Following that code path the compiler sees no memory barriers and so is within its rights to never reload xmon_speaker. The end result is we loop forever. This manifests as all cpus being in xmon ('c' command), but they refuse to take control when you switch to them ('c x' for cpu # x). I have seen this deadlock in practice and also checked the generated code to confirm this is what's happening. The simplest fix is just to always try the cmpxchg(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:50 UTC |
| b4d6c06 | Anshuman Khandual | 18 December 2013, 02:14:53 UTC | powerpc/perf: Configure BHRB filter before enabling PMU interrupts Right now the config_bhrb() PMU specific call happens after write_mmcr0(), which actually enables the PMU for event counting and interrupts. So there is a small window of time where the PMU and BHRB runs without the required HW branch filter (if any) enabled in BHRB. This can cause some of the branch samples to be collected through BHRB without any filter applied and hence affects the correctness of the results. This patch moves the BHRB config function call before enabling interrupts. Here are some data points captured via trace prints which depicts how we could get PMU interrupts with BHRB filter NOT enabled with a standard perf record command line (asking for branch record information as well). $ perf record -j any_call ls Before the patch:- ls-1962 [003] d... 2065.299590: .perf_event_interrupt: MMCRA: 40000000000 ls-1962 [003] d... 2065.299603: .perf_event_interrupt: MMCRA: 40000000000 ... All the PMU interrupts before this point did not have the requested HW branch filter enabled in the MMCRA. ls-1962 [003] d... 2065.299647: .perf_event_interrupt: MMCRA: 40040000000 ls-1962 [003] d... 2065.299662: .perf_event_interrupt: MMCRA: 40040000000 After the patch:- ls-1850 [008] d... 190.311828: .perf_event_interrupt: MMCRA: 40040000000 ls-1850 [008] d... 190.311848: .perf_event_interrupt: MMCRA: 40040000000 All the PMU interrupts have the requested HW BHRB branch filter enabled in MMCRA. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Fixed up whitespace and cleaned up changelog] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:50 UTC |
| 0ba3e10 | Nathan Fontenot | 29 January 2014, 16:34:56 UTC | crypto/nx/nx-842: Fix handling of vmalloc addresses The powerpc specific nx-842 compression driver does not currently handle translating a vmalloc address to a physical address. The current driver uses __pa() for all addresses which does not properly handle vmalloc addresses and thus causes a failure since we do not pass a proper physical address to the hypervisor. This patch adds a routine to convert an address to a physical address by checking for vmalloc addresses and handling them properly. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> --- drivers/crypto/nx/nx-842.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:49 UTC |
| 8d4887e | Michael Ellerman | 10 December 2013, 03:02:49 UTC | powerpc/pseries: Select ARCH_RANDOM on pseries We have a driver for the ARCH_RANDOM hook in rng.c, so we should select ARCH_RANDOM on pseries. Without this the build breaks if you turn ARCH_RANDOM off. This hasn't broken the build because pseries_defconfig doesn't specify a value for PPC_POWERNV, which is default y, and selects ARCH_RANDOM. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:49 UTC |
| 2fdd313 | Michael Ellerman | 24 January 2014, 04:50:51 UTC | powerpc/perf: Add Power8 cache & TLB events Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:48 UTC |
| 3b830c8 | Laurent Dufour | 30 January 2014, 15:58:42 UTC | powerpc/relocate fix relocate processing in LE mode Relocation's code is not working in little endian mode because the r_info field, which is a 64 bits value, should be read from the right offset. The current code is optimized to read the r_info field as a 32 bits value starting at the middle of the double word (offset 12). When running in LE mode, the read value is not correct since only the MSB is read. This patch removes this optimization which consist to deal with a 32 bits value instead of a 64 bits one. This way it works in big and little endian mode. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:48 UTC |
| 429d2e8 | Mahesh Salgaonkar | 30 January 2014, 19:01:04 UTC | powerpc: Fix kdump hang issue on p8 with relocation on exception enabled. On p8 systems, with relocation on exception feature enabled we are seeing kdump kernel hang at interrupt vector 0xc*4400. The reason is, with this feature enabled, exception are raised with MMU (IR=DR=1) ON with the default offset of 0xc*4000. Since exception is raised in virtual mode it requires the vector region to be executable without which it fails to fetch and execute instruction at 0xc*4xxx. For default kernel since kernel is loaded at real 0, the htab mappings sets the entire kernel text region executable. But for relocatable kernel (e.g. kdump case) we only copy interrupt vectors down to real 0 and never marked that region as executable because in p7 and below we always get exception in real mode. This patch fixes this issue by marking htab mapping range as executable that overlaps with the interrupt vector region for relocatable kernel. Thanks to Ben who helped me to debug this issue and find the root cause. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:47 UTC |
| 3ec8b78 | Mahesh Salgaonkar | 30 January 2014, 19:00:45 UTC | powerpc/pseries: Disable relocation on exception while going down during crash. Disable relocation on exception while going down even in kdump case. This is because we are about clear htab mappings while kexec-ing into kdump kernel and we may run into issues if we still have AIL ON. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:47 UTC |
| 8cc6b6c | Thadeu Lima de Souza Cascardo | 05 February 2014, 18:20:45 UTC | powerpc/eeh: Drop taken reference to driver on eeh_rmv_device Commit f5c57710dd62dd06f176934a8b4b8accbf00f9f8 ("powerpc/eeh: Use partial hotplug for EEH unaware drivers") introduces eeh_rmv_device, which may grab a reference to a driver, but not release it. That prevents a driver from being removed after it has gone through EEH recovery. This patch drops the reference if it was taken. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:46 UTC |
| 0215b4a | Paul Gortmaker | 07 February 2014, 19:50:58 UTC | powerpc: Fix build failure in sysdev/mpic.c for MPIC_WEIRD=y Commit 446f6d06fab0b49c61887ecbe8286d6aaa796637 ("powerpc/mpic: Properly set default triggers") breaks the mpc7447_hpc_defconfig as follows: CC arch/powerpc/sysdev/mpic.o arch/powerpc/sysdev/mpic.c: In function 'mpic_set_irq_type': arch/powerpc/sysdev/mpic.c:886:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:890:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:894:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:898:9: error: case label does not reduce to an integer constant Looking at the cpp output (gcc 4.7.3), I see: case mpic->hw_set[MPIC_IDX_VECPRI_SENSE_EDGE] | mpic->hw_set[MPIC_IDX_VECPRI_POLARITY_POSITIVE]: The pointer into an array appears because CONFIG_MPIC_WEIRD=y is set for this platform, thus enabling the following: ------------------- #ifdef CONFIG_MPIC_WEIRD static u32 mpic_infos[][MPIC_IDX_END] = { [0] = { /* Original OpenPIC compatible MPIC */ [...] #define MPIC_INFO(name) mpic->hw_set[MPIC_IDX_##name] #else /* CONFIG_MPIC_WEIRD */ #define MPIC_INFO(name) MPIC_##name #endif /* CONFIG_MPIC_WEIRD */ ------------------- Here we convert the case section to if/else if, and also add the equivalent of a default case to warn about unknown types. Boot tested on sbc8548, build tested on all defconfigs. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 11 February 2014, 00:24:45 UTC |
