Revision 8ca15e05e6ac2745725d2d62394cfbe4ac335e84 authored by Josef Bacik on 05 July 2013, 17:58:19 UTC, committed by Chris Mason on 09 August 2013, 23:29:56 UTC
If you do btrfs inspect-internal logical-resolve on a compressed extent that has
been partly overwritten it won't find anything.  This is because we try and
match the extent offset we've searched for based on the extent offset in the
data extent entry.  However this doesn't work for compressed extents because the
offsets are for the uncompressed size, not the compressed size.  So instead only
do this check if we are not compressed, that way we can get an actual entry for
the physical offset rather than nothing for compressed.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
1 parent b76bb70
Raw File
compress.c
/*
 * This file is part of UBIFS.
 *
 * Copyright (C) 2006-2008 Nokia Corporation.
 * Copyright (C) 2006, 2007 University of Szeged, Hungary
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published by
 * the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc., 51
 * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 *
 * Authors: Adrian Hunter
 *          Artem Bityutskiy (Битюцкий Артём)
 *          Zoltan Sogor
 */

/*
 * This file provides a single place to access to compression and
 * decompression.
 */

#include <linux/crypto.h>
#include "ubifs.h"

/* Fake description object for the "none" compressor */
static struct ubifs_compressor none_compr = {
	.compr_type = UBIFS_COMPR_NONE,
	.name = "none",
	.capi_name = "",
};

#ifdef CONFIG_UBIFS_FS_LZO
static DEFINE_MUTEX(lzo_mutex);

static struct ubifs_compressor lzo_compr = {
	.compr_type = UBIFS_COMPR_LZO,
	.comp_mutex = &lzo_mutex,
	.name = "lzo",
	.capi_name = "lzo",
};
#else
static struct ubifs_compressor lzo_compr = {
	.compr_type = UBIFS_COMPR_LZO,
	.name = "lzo",
};
#endif

#ifdef CONFIG_UBIFS_FS_ZLIB
static DEFINE_MUTEX(deflate_mutex);
static DEFINE_MUTEX(inflate_mutex);

static struct ubifs_compressor zlib_compr = {
	.compr_type = UBIFS_COMPR_ZLIB,
	.comp_mutex = &deflate_mutex,
	.decomp_mutex = &inflate_mutex,
	.name = "zlib",
	.capi_name = "deflate",
};
#else
static struct ubifs_compressor zlib_compr = {
	.compr_type = UBIFS_COMPR_ZLIB,
	.name = "zlib",
};
#endif

/* All UBIFS compressors */
struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT];

/**
 * ubifs_compress - compress data.
 * @in_buf: data to compress
 * @in_len: length of the data to compress
 * @out_buf: output buffer where compressed data should be stored
 * @out_len: output buffer length is returned here
 * @compr_type: type of compression to use on enter, actually used compression
 *              type on exit
 *
 * This function compresses input buffer @in_buf of length @in_len and stores
 * the result in the output buffer @out_buf and the resulting length in
 * @out_len. If the input buffer does not compress, it is just copied to the
 * @out_buf. The same happens if @compr_type is %UBIFS_COMPR_NONE or if
 * compression error occurred.
 *
 * Note, if the input buffer was not compressed, it is copied to the output
 * buffer and %UBIFS_COMPR_NONE is returned in @compr_type.
 */
void ubifs_compress(const void *in_buf, int in_len, void *out_buf, int *out_len,
		    int *compr_type)
{
	int err;
	struct ubifs_compressor *compr = ubifs_compressors[*compr_type];

	if (*compr_type == UBIFS_COMPR_NONE)
		goto no_compr;

	/* If the input data is small, do not even try to compress it */
	if (in_len < UBIFS_MIN_COMPR_LEN)
		goto no_compr;

	if (compr->comp_mutex)
		mutex_lock(compr->comp_mutex);
	err = crypto_comp_compress(compr->cc, in_buf, in_len, out_buf,
				   (unsigned int *)out_len);
	if (compr->comp_mutex)
		mutex_unlock(compr->comp_mutex);
	if (unlikely(err)) {
		ubifs_warn("cannot compress %d bytes, compressor %s, error %d, leave data uncompressed",
			   in_len, compr->name, err);
		 goto no_compr;
	}

	/*
	 * If the data compressed only slightly, it is better to leave it
	 * uncompressed to improve read speed.
	 */
	if (in_len - *out_len < UBIFS_MIN_COMPRESS_DIFF)
		goto no_compr;

	return;

no_compr:
	memcpy(out_buf, in_buf, in_len);
	*out_len = in_len;
	*compr_type = UBIFS_COMPR_NONE;
}

/**
 * ubifs_decompress - decompress data.
 * @in_buf: data to decompress
 * @in_len: length of the data to decompress
 * @out_buf: output buffer where decompressed data should
 * @out_len: output length is returned here
 * @compr_type: type of compression
 *
 * This function decompresses data from buffer @in_buf into buffer @out_buf.
 * The length of the uncompressed data is returned in @out_len. This functions
 * returns %0 on success or a negative error code on failure.
 */
int ubifs_decompress(const void *in_buf, int in_len, void *out_buf,
		     int *out_len, int compr_type)
{
	int err;
	struct ubifs_compressor *compr;

	if (unlikely(compr_type < 0 || compr_type >= UBIFS_COMPR_TYPES_CNT)) {
		ubifs_err("invalid compression type %d", compr_type);
		return -EINVAL;
	}

	compr = ubifs_compressors[compr_type];

	if (unlikely(!compr->capi_name)) {
		ubifs_err("%s compression is not compiled in", compr->name);
		return -EINVAL;
	}

	if (compr_type == UBIFS_COMPR_NONE) {
		memcpy(out_buf, in_buf, in_len);
		*out_len = in_len;
		return 0;
	}

	if (compr->decomp_mutex)
		mutex_lock(compr->decomp_mutex);
	err = crypto_comp_decompress(compr->cc, in_buf, in_len, out_buf,
				     (unsigned int *)out_len);
	if (compr->decomp_mutex)
		mutex_unlock(compr->decomp_mutex);
	if (err)
		ubifs_err("cannot decompress %d bytes, compressor %s, error %d",
			  in_len, compr->name, err);

	return err;
}

/**
 * compr_init - initialize a compressor.
 * @compr: compressor description object
 *
 * This function initializes the requested compressor and returns zero in case
 * of success or a negative error code in case of failure.
 */
static int __init compr_init(struct ubifs_compressor *compr)
{
	if (compr->capi_name) {
		compr->cc = crypto_alloc_comp(compr->capi_name, 0, 0);
		if (IS_ERR(compr->cc)) {
			ubifs_err("cannot initialize compressor %s, error %ld",
				  compr->name, PTR_ERR(compr->cc));
			return PTR_ERR(compr->cc);
		}
	}

	ubifs_compressors[compr->compr_type] = compr;
	return 0;
}

/**
 * compr_exit - de-initialize a compressor.
 * @compr: compressor description object
 */
static void compr_exit(struct ubifs_compressor *compr)
{
	if (compr->capi_name)
		crypto_free_comp(compr->cc);
	return;
}

/**
 * ubifs_compressors_init - initialize UBIFS compressors.
 *
 * This function initializes the compressor which were compiled in. Returns
 * zero in case of success and a negative error code in case of failure.
 */
int __init ubifs_compressors_init(void)
{
	int err;

	err = compr_init(&lzo_compr);
	if (err)
		return err;

	err = compr_init(&zlib_compr);
	if (err)
		goto out_lzo;

	ubifs_compressors[UBIFS_COMPR_NONE] = &none_compr;
	return 0;

out_lzo:
	compr_exit(&lzo_compr);
	return err;
}

/**
 * ubifs_compressors_exit - de-initialize UBIFS compressors.
 */
void ubifs_compressors_exit(void)
{
	compr_exit(&lzo_compr);
	compr_exit(&zlib_compr);
}
back to top