| 8d7c55d | Michael Ellerman | 23 July 2013, 08:07:45 UTC | powerpc/perf: Export PERF_EVENT_CONFIG_EBB_SHIFT to userspace We use bit 63 of the event code for userspace to request that the event be counted using EBB (Event Based Branches). Export this value, making it part of the API - though only on processors that support EBB. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 01 August 2013, 03:11:46 UTC |
| e8e813e | Michael Ellerman | 04 June 2013, 04:21:17 UTC | powerpc: Rename PMU interrupts from CNT to PMI Back in commit 89713ed "Add timer, performance monitor and machine check counts to /proc/interrupts" we added a count of PMU interrupts to the output of /proc/interrupts. At the time we named them "CNT" to match x86. However in commit 89ccf46 "Rename 'performance counter interrupt'", the x86 guys renamed theirs from "CNT" to "PMI". Arguably changing the name could break someone's script, but I think the chance of that is minimal, and it's preferable to have a name that 1) is somewhat meaningful, and 2) matches x86. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 01 August 2013, 03:11:46 UTC |
| ff3d79d | Anshuman Khandual | 10 June 2013, 05:53:29 UTC | powerpc/perf: BHRB filter configuration should follow the task When the task moves around the system, the corresponding cpuhw per cpu strcuture should be popullated with the BHRB filter request value so that PMU could be configured appropriately with that during the next call into power_pmu_enable(). Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:42:34 UTC |
| 7689bdc | Anshuman Khandual | 10 June 2013, 05:53:28 UTC | powerpc/perf: Ignore separate BHRB privilege state filter request Completely ignore BHRB privilege state filter request as we are already configuring that with privilege state filtering attribute for the accompanying PMU event. This would help achieve cleaner user space interaction for BHRB. This patch fixes a situation like this Before patch:- ------------ ./perf record -j any -e branch-misses:k ls Error: The sys_perf_event_open() syscall returned with 95 (Operation not supported) for event (branch-misses:k). /bin/dmesg may provide additional information. No CONFIG_PERF_EVENTS=y kernel support configured? Here 'perf record' actually copies over ':k' filter request into BHRB privilege state filter config and our previous check in kernel would fail that. After patch:- ------------- ./perf record -j any -e branch-misses:k ls perf perf.data perf.data.old test-mmap-ring [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (~102 samples)] Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:42:31 UTC |
| 6797500 | Bjorn Helgaas | 02 July 2013, 18:20:03 UTC | powerpc/powernv: Mark pnv_pci_init_ioda2_phb() as __init Mark pnv_pci_init_ioda2_phb() as __init. It is called only from an init function (pnv_pci_init()), and it calls an init function (pnv_pci_init_ioda_phb()): pnv_pci_init # init pnv_pci_init_ioda2_phb # non-init pnv_pci_init_ioda_phb # init This should fix a section mismatch warning. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:42:27 UTC |
| de64095 | Aneesh Kumar K.V | 04 July 2013, 05:04:45 UTC | powerpc/mm: Use the correct SLB(LLP) encoding in tlbie instruction The sllp value is stored in mmu_psize_defs in such a way that we can easily OR the value to get the operand for slbmte instruction. ie, the L and LP bits are not contiguous. Decode the bits and use them correctly in tlbie. regression is introduced by 1f6aaaccb1b3af8613fe45781c1aefee2ae8c6b3 "powerpc: Update tlbie/tlbiel as per ISA doc" Reported-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:42:24 UTC |
| 83383b7 | Aneesh Kumar K.V | 03 July 2013, 08:20:03 UTC | powerpc/mm: Fix fallthrough bug in hpte_decode We should not fallthrough different case statements in hpte_decode. Add break statement to break out of the switch. The regression is introduced by dcda287a9b26309ae43a091d0ecde16f8f61b4c0 "powerpc/mm: Simplify hpte_decode" Reported-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:42:21 UTC |
| ad92c61 | Denis Kirjanov | 23 July 2013, 11:28:03 UTC | powerpc/pseries: Fix a typo in pSeries_lpar_hpte_insert() Commit 801eb73f45371accc78ca9d6d22d647eeb722c11 introduced a bug while checking PTE flags. We have to drop the _PAGE_COHERENT flag when __PAGE_NO_CACHE is set and the cache update policy is not write-through (i.e. _PAGE_WRITETHRU is not set) Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> CC: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:42:18 UTC |
| ab55d21 | Gavin Shan | 24 July 2013, 02:25:01 UTC | powerpc/eeh: Introdce flag to protect sysfs The patch introduces flag EEH_DEV_SYSFS to keep track that the sysfs entries for the corresponding EEH device (then PCI device) has been added or removed, in order to avoid race condition. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:49 UTC |
| 91150af | Gavin Shan | 24 July 2013, 02:25:00 UTC | powerpc/eeh: Fix unbalanced enable for IRQ The patch fixes following issue: Unbalanced enable for IRQ 23 ------------[ cut here ]------------ WARNING: at kernel/irq/manage.c:437 : NIP [c00000000016de8c] .__enable_irq+0x11c/0x140 LR [c00000000016de88] .__enable_irq+0x118/0x140 Call Trace: [c000003ea1f23880] [c00000000016de88] .__enable_irq+0x118/0x140 (unreliable) [c000003ea1f23910] [c00000000016df08] .enable_irq+0x58/0xa0 [c000003ea1f239a0] [c0000000000388b4] .eeh_enable_irq+0xc4/0xe0 [c000003ea1f23a30] [c000000000038a28] .eeh_report_reset+0x78/0x130 [c000003ea1f23ac0] [c000000000037508] .eeh_pe_dev_traverse+0x98/0x170 [c000003ea1f23b60] [c0000000000391ac] .eeh_handle_normal_event+0x2fc/0x3d0 [c000003ea1f23bf0] [c000000000039538] .eeh_handle_event+0x2b8/0x2c0 [c000003ea1f23c90] [c000000000039600] .eeh_event_handler+0xc0/0x170 [c000003ea1f23d30] [c0000000000da9a0] .kthread+0xf0/0x100 [c000003ea1f23e30] [c00000000000a1dc] .ret_from_kernel_thread+0x5c/0x80 Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:49 UTC |
| 4b83bd4 | Gavin Shan | 24 July 2013, 02:24:59 UTC | powerpc/eeh: Don't use pci_dev during BAR restore While restoring BARs for one specific PCI device, the pci_dev instance should have been released. So it's not reliable to use the pci_dev instance on restoring BARs. However, we still need some information (e.g. PCIe capability position, header type) from the pci_dev instance. So we have to store those information to EEH device in advance. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:49 UTC |
| f5c5771 | Gavin Shan | 24 July 2013, 02:24:58 UTC | powerpc/eeh: Use partial hotplug for EEH unaware drivers When EEH error happens to one specific PE, some devices with drivers supporting EEH won't except hotplug on the device. However, there might have other deivces without driver, or with driver without EEH support. For the case, we need do partial hotplug in order to make sure that the PE becomes absolutely quite during reset. Otherise, the PE reset might fail and leads to failure of error recovery. The current code doesn't handle that 'mixed' case properly, it either uses the error callbacks to the drivers, or tries hotplug, but doesn't handle a PE (EEH domain) composed of a combination of the two. The patch intends to support so-called "partial" hotplug for EEH: Before we do reset, we stop and remove those PCI devices without EEH sensitive driver. The corresponding EEH devices are not detached from its PE, but with special flag. After the reset is done, those EEH devices with the special flag will be scanned one by one. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:48 UTC |
| ab444ec | Gavin Shan | 24 July 2013, 02:24:57 UTC | powerpc/pci: Partial tree hotplug support When EEH error happens to one specific PE, the device drivers of its attached EEH devices (PCI devices) are checked to see the further action: reset with complete hotplug, or reset without hotplug. However, that's not enough for those PCI devices whose drivers can't support EEH, or those PCI devices without driver. So we need do so-called "partial hotplug" on basis of PCI devices. In the situation, part of PCI devices of the specific PE are unplugged and plugged again after PE reset. The patch changes pcibios_add_pci_devices() so that it can support full hotplug and so-called "partial" hotplug based on device-tree or real hardware. It's notable that pci_of_scan.c has been changed for a bit in order to support the "partial" hotplug based on dev-tree. Most of the generic code already supports that, we just need to plumb it properly on our side. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:48 UTC |
| 9feed42 | Gavin Shan | 24 July 2013, 02:24:56 UTC | powerpc/eeh: Use safe list traversal when walking EEH devices Currently, we're trasversing the EEH devices list using list_for_each_entry(). That's not safe enough because the EEH devices might be removed from its parent PE while doing iteration. The patch replaces that with list_for_each_entry_safe(). Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:47 UTC |
| 807a827 | Gavin Shan | 24 July 2013, 02:24:55 UTC | powerpc/eeh: Keep PE during hotplug When we do normal hotplug, the PE (shadow EEH structure) shouldn't be kept around. However, we need to keep it if the hotplug an artifial one caused by EEH errors recovery. Since we remove EEH device through the PCI hook pcibios_release_device(), the flag "purge_pe" passed to various functions is meaningless. So the patch removes the meaningless flag and introduce new flag "EEH_PE_KEEP" to save the PE while doing hotplug during EEH error recovery. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:47 UTC |
| c7b51bc | Gavin Shan | 24 July 2013, 02:24:54 UTC | powerpc/pci/hotplug: Don't need to remove from EEH cache twice Since pcibios_release_device() called by pci_stop_and_remove_bus_device() has removed the device from the EEH cache, we needn't do that again. Cc: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:47 UTC |
| 008a493 | Gavin Shan | 24 July 2013, 02:24:53 UTC | powerpc/pci: Override pcibios_release_device() The patch overrides pcibios_release_device() to release EEH resources (EEH cache, unbinding EEH device) for the indicated PCI device. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:46 UTC |
| f285649 | Gavin Shan | 24 July 2013, 02:24:52 UTC | powerpc/eeh: Export functions for hotplug Make some functions public in order to support hotplug on either specific PCI bus or PCI device in future. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:46 UTC |
| 0ba1788 | Gavin Shan | 24 July 2013, 02:24:51 UTC | powerpc/eeh: Remove reference to PCI device We will rely on pcibios_release_device() to remove the EEH cache and unbind EEH device for the specific PCI device. So we shouldn't hold the reference to the PCI device from EEH cache and EEH device. Otherwise, pcibios_release_device() won't be called as we expected. The patch removes the reference to the PCI device in EEH core. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:46 UTC |
| ee1dd1e | Mahesh Salgaonkar | 10 July 2013, 13:02:56 UTC | powerpc: Fix the corrupt r3 error during MCE handling. During Machine Check interrupt on pseries platform, R3 generally points to memory region inside RTAS (FWNMI) area. We see r3 corruption because when RTAS delivers the machine check exception it passes the address inside FWNMI area with the top most bit set. This patch fixes this issue by masking top two bit in machine check exception handler. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:45 UTC |
| 5d7ead0 | Michael Ellerman | 13 July 2013, 02:53:40 UTC | powerpc/perf: Set PPC_FEATURE2_EBB when we register the power8 PMU The presence or absence of EBB is advertised to userspace via the presence or absence of PPC_FEATURE2_EBB in cpu_user_features2. Because the kernel can be built without PMU support, we should only add PPC_FEATURE2_EBB to cpu_user_features2 when we successfully register the power8 PMU support. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:45 UTC |
| 9764515 | Paul Bolle | 14 July 2013, 11:02:15 UTC | powerpc/pseries: Drop "select HOTPLUG" The Kconfig symbol HOTPLUG was removed with commit 40b313608a ("Finally eradicate CONFIG_HOTPLUG"). But there's still one select statement for that symbol. It seems that select statement was added after the patch to remove CONFIG_HOTPLUG was submitted. Anyhow, it is useless and can be dropped. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:44 UTC |
| 0b88f77 | Tiejun Chen | 15 July 2013, 02:36:04 UTC | powerpc: Access local paca after hard irq disabled In hard_irq_disable(), we accessed the PACA before we hard disabled the interrupts, potentially causing a warning as get_paca() will us debug_smp_processor_id(). Move that to after the disabling, and also use local_paca directly rather than get_paca() to avoid several redundant and useless checks. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:44 UTC |
| 0e0ed64 | Anton Blanchard | 15 July 2013, 04:04:50 UTC | powerpc/modules: Module CRC relocation fix causes perf issues Module CRCs are implemented as absolute symbols that get resolved by a linker script. We build an intermediate .o that contains an unresolved symbol for each CRC. genksysms parses this .o, calculates the CRCs and writes a linker script that "resolves" the symbols to the calculated CRC. Unfortunately the ppc64 relocatable kernel sees these CRCs as symbols that need relocating and relocates them at boot. Commit d4703aef (module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y) added a hook to reverse the bogus relocations. Part of this patch created a symbol at 0x0: # head -2 /proc/kallsyms 0000000000000000 T reloc_start c000000000000000 T .__start This reloc_start symbol is causing lots of confusion to perf. It thinks reloc_start is a massive function that stretches from 0x0 to 0xc000000000000000 and we get various cryptic errors out of perf, including: problem incrementing symbol count, skipping event This patch removes the reloc_start linker script label and instead defines it as PHYSICAL_START. We also need to wrap it with CONFIG_PPC64 because the ppc32 kernel can set a non zero PHYSICAL_START at compile time and we wouldn't want to subtract it from the CRCs in that case. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:43 UTC |
| 33959f8 | Michael Neuling | 18 July 2013, 01:31:51 UTC | powerpc: Add second POWER8 PVR entry POWER8 comes with two different PVRs. This patch enables the additional PVR in the cputable. The existing entry (PVR=0x4b) is renamed to POWER8E and the new entry (PVR=0x4d) is given POWER8. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 24 July 2013, 04:18:43 UTC |
| 3b2f64d | Linus Torvalds | 21 July 2013, 19:05:29 UTC | Linux 3.11-rc2 | 21 July 2013, 19:05:29 UTC |
| ea45ea7 | Linus Torvalds | 21 July 2013, 17:11:04 UTC | Merge tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI video support fixes from Rafael Wysocki: "I'm sending a separate pull request for this as it may be somewhat controversial. The breakage addressed here is not really new and the fixes may not satisfy all users of the affected systems, but we've had so much back and forth dance in this area over the last several weeks that I think it's time to actually make some progress. The source of the problem is that about a year ago we started to tell BIOSes that we're compatible with Windows 8, which we really need to do, because some systems shipping with Windows 8 are tested with it and nothing else, so if we tell their BIOSes that we aren't compatible with Windows 8, we expose our users to untested BIOS/AML code paths. However, as it turns out, some Windows 8-specific AML code paths are not tested either, because Windows 8 actually doesn't use the ACPI methods containing them, so if we declare Windows 8 compatibility and attempt to use those ACPI methods, things break. That occurs mostly in the backlight support area where in particular the _BCM and _BQC methods are plain unusable on some systems if the OS declares Windows 8 compatibility. [ The additional twist is that they actually become usable if the OS says it is not compatible with Windows 8, but that may cause problems to show up elsewhere ] Investigation carried out by Matthew Garrett indicates that what Windows 8 does about backlight is to leave backlight control up to individual graphics drivers. At least there's evidence that it does that if the Intel graphics driver is used, so we've decided to follow Windows 8 in that respect and allow i915 to control backlight (Daniel likes that part). The first commit from Aaron Lu makes ACPICA export the variable from which we can infer whether or not the BIOS believes that we are compatible with Windows 8. The second commit from Matthew Garrett prepares the ACPI video driver by making it initialize the ACPI backlight even if it is not going to be used afterward (that is needed for backlight control to work on Thinkpads). The third commit implements the actual workaround making i915 take over backlight control if the firmware thinks it's dealing with Windows 8 and is based on the work of multiple developers, including Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu. The final commit from Aaron Lu makes us follow Windows 8 by informing the firmware through the _DOS method that it should not carry out automatic brightness changes, so that brightness can be controlled by GUI. Hopefully, this approach will allow us to avoid using blacklists of systems that should not declare Windows 8 compatibility just to avoid backlight control problems in the future. - Change from Aaron Lu makes ACPICA export a variable which can be used by driver code to determine whether or not the BIOS believes that we are compatible with Windows 8. - Change from Matthew Garrett makes the ACPI video driver initialize the ACPI backlight even if it is not going to be used afterward (that is needed for backlight control to work on Thinkpads). - Fix from Rafael J Wysocki implements Windows 8 backlight support workaround making i915 take over bakclight control if the firmware thinks it's dealing with Windows 8. Based on the work of multiple developers including Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu. - Fix from Aaron Lu makes the kernel follow Windows 8 by informing the firmware through the _DOS method that it should not carry out automatic brightness changes, so that brightness can be controlled by GUI" * tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: no automatic brightness changes by win8-compatible firmware ACPI / video / i915: No ACPI backlight if firmware expects Windows 8 ACPI / video: Always call acpi_video_init_brightness() on init ACPICA: expose OSI version | 21 July 2013, 17:11:04 UTC |
| 90db76e | Linus Torvalds | 21 July 2013, 03:11:42 UTC | Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext[34] tmpfile bugfix from Ted Ts'o: "Fix regression caused by commit af51a2ac36d1f which added ->tmpfile() support (along with a similar fix for ext3)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext3: fix a BUG when opening a file with O_TMPFILE flag ext4: fix a BUG when opening a file with O_TMPFILE flag | 21 July 2013, 03:11:42 UTC |
| dda5690 | Zheng Liu | 21 July 2013, 02:03:20 UTC | ext3: fix a BUG when opening a file with O_TMPFILE flag When we try to open a file with O_TMPFILE flag, we will trigger a bug. The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and this check always fails because we set ->i_nlink = 1 in inode_init_always(). We can use the following program to trigger it: int main(int argc, char *argv[]) { int fd; fd = open(argv[1], O_TMPFILE, 0666); if (fd < 0) { perror("open "); return -1; } close(fd); return 0; } The oops message looks like this: kernel: kernel BUG at fs/ext3/namei.c:1992! kernel: invalid opcode: 0000 [#1] SMP kernel: Modules linked in: ext4 jbd2 crc16 cpufreq_ondemand ipv6 dm_mirror dm_region_hash dm_log dm_mod parport_pc parport serio_raw sg dcdbas pcspkr i2c_i801 ehci_pci ehci_hcd button acpi_cpufreq mperf e1000e ptp pps_core ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core ext3 jbd sd_mod ahci libahci libata scsi_mod uhci_hcd kernel: CPU: 0 PID: 2882 Comm: tst_tmpfile Not tainted 3.11.0-rc1+ #4 kernel: Hardware name: Dell Inc. OptiPlex 780 /0V4W66, BIOS A05 08/11/2010 kernel: task: ffff880112d30050 ti: ffff8801124d4000 task.ti: ffff8801124d4000 kernel: RIP: 0010:[<ffffffffa00db5ae>] [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3] kernel: RSP: 0018:ffff8801124d5cc8 EFLAGS: 00010202 kernel: RAX: 0000000000000000 RBX: ffff880111510128 RCX: ffff8801114683a0 kernel: RDX: 0000000000000000 RSI: ffff880111510128 RDI: ffff88010fcf65a8 kernel: RBP: ffff8801124d5d18 R08: 0080000000000000 R09: ffffffffa00d3b7f kernel: R10: ffff8801114683a0 R11: ffff8801032a2558 R12: 0000000000000000 kernel: R13: ffff88010fcf6800 R14: ffff8801032a2558 R15: ffff8801115100d8 kernel: FS: 00007f5d172b5700(0000) GS:ffff880117c00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b kernel: CR2: 00007f5d16df15d0 CR3: 0000000110b1d000 CR4: 00000000000407f0 kernel: Stack: kernel: 000000000000000c ffff8801048a7dc8 ffff8801114685a8 ffffffffa00b80d7 kernel: ffff8801124d5e38 ffff8801032a2558 ffff88010ce24d68 0000000000000000 kernel: ffff88011146b300 ffff8801124d5d44 ffff8801124d5d78 ffffffffa00db7e1 kernel: Call Trace: kernel: [<ffffffffa00b80d7>] ? journal_start+0x8c/0xbd [jbd] kernel: [<ffffffffa00db7e1>] ext3_tmpfile+0xb2/0x13b [ext3] kernel: [<ffffffff821076f8>] path_openat+0x11f/0x5e7 kernel: [<ffffffff821c86b4>] ? list_del+0x11/0x30 kernel: [<ffffffff82065fa2>] ? __dequeue_entity+0x33/0x38 kernel: [<ffffffff82107cd5>] do_filp_open+0x3f/0x8d kernel: [<ffffffff82112532>] ? __alloc_fd+0x50/0x102 kernel: [<ffffffff820f9296>] do_sys_open+0x13b/0x1cd kernel: [<ffffffff820f935c>] SyS_open+0x1e/0x20 kernel: [<ffffffff82398c02>] system_call_fastpath+0x16/0x1b kernel: Code: 39 c7 0f 85 67 01 00 00 0f b7 03 25 00 f0 00 00 3d 00 40 00 00 74 18 3d 00 80 00 00 74 11 3d 00 a0 00 00 74 0a 83 7b 48 00 74 04 <0f> 0b eb fe 49 8b 85 50 03 00 00 4c 89 f6 48 c7 c7 c0 99 0e a0 kernel: RIP [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3] kernel: RSP <ffff8801124d5cc8> Here we couldn't call clear_nlink() directly because in d_tmpfile() we will call inode_dec_link_count() to decrease ->i_nlink. So this commit tries to call d_tmpfile() before ext4_orphan_add() to fix this problem. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> | 21 July 2013, 02:03:20 UTC |
| e94bd34 | Zheng Liu | 21 July 2013, 01:58:38 UTC | ext4: fix a BUG when opening a file with O_TMPFILE flag When we try to open a file with O_TMPFILE flag, we will trigger a bug. The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and this check always fails because we set ->i_nlink = 1 in inode_init_always(). We can use the following program to trigger it: int main(int argc, char *argv[]) { int fd; fd = open(argv[1], O_TMPFILE, 0666); if (fd < 0) { perror("open "); return -1; } close(fd); return 0; } The oops message looks like this: kernel BUG at fs/ext4/namei.c:2572! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: dlci bridge stp hidp cmtp kernelcapi l2tp_ppp l2tp_netlink l2tp_core sctp libcrc32c rfcomm tun fuse nfnetli nk can_raw ipt_ULOG can_bcm x25 scsi_transport_iscsi ipx p8023 p8022 appletalk phonet psnap vmw_vsock_vmci_transport af_key vmw_vmci rose vsock atm can netrom ax25 af_rxrpc ir da pppoe pppox ppp_generic slhc bluetooth nfc rfkill rds caif_socket caif crc_ccitt af_802154 llc2 llc snd_hda_codec_realtek snd_hda_intel snd_hda_codec serio_raw snd_pcm pcsp kr edac_core snd_page_alloc snd_timer snd soundcore r8169 mii sr_mod cdrom pata_atiixp radeon backlight drm_kms_helper ttm CPU: 1 PID: 1812571 Comm: trinity-child2 Not tainted 3.11.0-rc1+ #12 Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010 task: ffff88007dfe69a0 ti: ffff88010f7b6000 task.ti: ffff88010f7b6000 RIP: 0010:[<ffffffff8125ce69>] [<ffffffff8125ce69>] ext4_orphan_add+0x299/0x2b0 RSP: 0018:ffff88010f7b7cf8 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8800966d3020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88007dfe70b8 RDI: 0000000000000001 RBP: ffff88010f7b7d40 R08: ffff880126a3c4e0 R09: ffff88010f7b7ca0 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801271fd668 R13: ffff8800966d2f78 R14: ffff88011d7089f0 R15: ffff88007dfe69a0 FS: 00007f70441a3740(0000) GS:ffff88012a800000(0000) knlGS:00000000f77c96c0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000002834000 CR3: 0000000107964000 CR4: 00000000000007e0 DR0: 0000000000780000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Stack: 0000000000002000 00000020810b6dde 0000000000000000 ffff88011d46db00 ffff8800966d3020 ffff88011d7089f0 ffff88009c7f4c10 ffff88010f7b7f2c ffff88007dfe69a0 ffff88010f7b7da8 ffffffff8125cfac ffff880100000004 Call Trace: [<ffffffff8125cfac>] ext4_tmpfile+0x12c/0x180 [<ffffffff811cba78>] path_openat+0x238/0x700 [<ffffffff8100afc4>] ? native_sched_clock+0x24/0x80 [<ffffffff811cc647>] do_filp_open+0x47/0xa0 [<ffffffff811db73f>] ? __alloc_fd+0xaf/0x200 [<ffffffff811ba2e4>] do_sys_open+0x124/0x210 [<ffffffff81010725>] ? syscall_trace_enter+0x25/0x290 [<ffffffff811ba3ee>] SyS_open+0x1e/0x20 [<ffffffff816ca8d4>] tracesys+0xdd/0xe2 [<ffffffff81001001>] ? start_thread_common.constprop.6+0x1/0xa0 Code: 04 00 00 00 89 04 24 31 c0 e8 c4 77 04 00 e9 43 fe ff ff 66 25 00 d0 66 3d 00 80 0f 84 0e fe ff ff 83 7b 48 00 0f 84 04 fe ff ff <0f> 0b 49 8b 8c 24 50 07 00 00 e9 88 fe ff ff 0f 1f 84 00 00 00 Here we couldn't call clear_nlink() directly because in d_tmpfile() we will call inode_dec_link_count() to decrease ->i_nlink. So this commit tries to call d_tmpfile() before ext4_orphan_add() to fix this problem. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Tested-by: Darrick J. Wong <darrick.wong@oracle.com> Tested-by: Dave Jones <davej@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Acked-by: Al Viro <viro@zeniv.linux.org.uk> | 21 July 2013, 01:58:38 UTC |
| f6a0d9d | Linus Torvalds | 20 July 2013, 22:42:38 UTC | Merge tag 'staging-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree fixes from Greg KH: "Here are a few iio driver fixes for 3.11-rc2. They are still spread across drivers/iio and drivers/staging/iio so they are coming in through this tree. I've also removed the drivers/staging/csr/ driver as the developers who originally sent it to me have moved on to other companies, and CSR still will not send us the specs for the device, making the driver pretty much obsolete and impossible to fix up. Deleting it now prevents people from sending in lots of tiny codingsyle fixes that will never go anywhere. It also helps to offset the large lustre filesystem merge that happened in 3.11-rc1 in the overall 3.11.0 diffstat. :)" * tag 'staging-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: csr: remove driver iio: lps331ap: Fix wrong in_pressure_scale output value iio staging: fix lis3l02dq, read error handling staging:iio:ad7291: add missing .driver_module to struct iio_info iio: ti_am335x_adc: add missing .driver_module to struct iio_info iio: mxs-lradc: Remove useless check in read_raw iio: mxs-lradc: Fix misuse of iio->trig iio: inkern: fix iio_convert_raw_to_processed_unlocked iio: Fix iio_channel_has_info iio:trigger: device_unregister->device_del to avoid double free iio: dac: ad7303: fix error return code in ad7303_probe() | 20 July 2013, 22:42:38 UTC |
| 36231d2 | Linus Torvalds | 20 July 2013, 17:50:01 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "The sget() one is a long-standing bug and will need to go into -stable (in fact, it had been originally caught in RHEL6), the other two are 3.11-only" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: constify dentry parameter in d_count() livelock avoidance in sget() allow O_TMPFILE to work with O_WRONLY | 20 July 2013, 17:50:01 UTC |
| 19bf1c2 | Linus Torvalds | 20 July 2013, 17:48:59 UTC | Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o: "Fixes for 3.11-rc2, sent at 5pm, in the professoinal style. :-)" I'm not sure I like this new level of "professionalism". 9-5, people, 9-5. * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: call ext4_es_lru_add() after handling cache miss ext4: yield during large unlinks ext4: make the extent_status code more robust against ENOMEM failures ext4: simplify calculation of blocks to free on error ext4: fix error handling in ext4_ext_truncate() | 20 July 2013, 17:48:59 UTC |
| 3be542d | Linus Torvalds | 20 July 2013, 17:48:24 UTC | Merge tag 'nfs-for-3.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: - Fix a regression against NFSv4 FreeBSD servers when creating a new file - Fix another regression in rpc_client_register() * tag 'nfs-for-3.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix a regression against the FreeBSD server SUNRPC: Fix another issue with rpc_client_register() | 20 July 2013, 17:48:24 UTC |
| 90290c4 | Linus Torvalds | 20 July 2013, 17:47:38 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next Pull btrfs fixes from Josef Bacik: "I'm playing the role of Chris Mason this week while he's on vacation. There are a few critical fixes for btrfs here, all regressions and have been tested well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next: Btrfs: fix wrong write offset when replacing a device Btrfs: re-add root to dead root list if we stop dropping it Btrfs: fix lock leak when resuming snapshot deletion Btrfs: update drop progress before stopping snapshot dropping | 20 July 2013, 17:47:38 UTC |
| 24924a2 | Peng Tao | 18 July 2013, 14:09:08 UTC | vfs: constify dentry parameter in d_count() so that it can be used in places like d_compare/d_hash without causing a compiler warning. Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 20 July 2013, 01:06:27 UTC |
| acfec9a | Al Viro | 19 July 2013, 23:13:55 UTC | livelock avoidance in sget() Eric Sandeen has found a nasty livelock in sget() - take a mount(2) about to fail. The superblock is on ->fs_supers, ->s_umount is held exclusive, ->s_active is 1. Along comes two more processes, trying to mount the same thing; sget() in each is picking that superblock, bumping ->s_count and trying to grab ->s_umount. ->s_active is 3 now. Original mount(2) finally gets to deactivate_locked_super() on failure; ->s_active is 2, superblock is still ->fs_supers because shutdown will *not* happen until ->s_active hits 0. ->s_umount is dropped and now we have two processes chasing each other: s_active = 2, A acquired ->s_umount, B blocked A sees that the damn thing is stillborn, does deactivate_locked_super() s_active = 1, A drops ->s_umount, B gets it A restarts the search and finds the same superblock. And bumps it ->s_active. s_active = 2, B holds ->s_umount, A blocked on trying to get it ... and we are in the earlier situation with A and B switched places. The root cause, of course, is that ->s_active should not grow until we'd got MS_BORN. Then failing ->mount() will have deactivate_locked_super() shut the damn thing down. Fortunately, it's easy to do - the key point is that grab_super() is called only for superblocks currently on ->fs_supers, so it can bump ->s_count and grab ->s_umount first, then check MS_BORN and bump ->s_active; we must never increment ->s_count for superblocks past ->kill_sb(), but grab_super() is never called for those. The bug is pretty old; we would've caught it by now, if not for accidental exclusion between sget() for block filesystems; the things like cgroup or e.g. mtd-based filesystems don't have anything of that sort, so they get bitten. The right way to deal with that is obviously to fix sget()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 20 July 2013, 00:58:58 UTC |
| ba57ea6 | Al Viro | 19 July 2013, 23:11:32 UTC | allow O_TMPFILE to work with O_WRONLY Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 19 July 2013, 23:11:32 UTC |
| d471ce5 | Linus Torvalds | 19 July 2013, 22:11:09 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML fixes from Richard Weinberger: "Special thanks goes to Toralf Föster for continuously testing UML and reporting issues!" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: remove dead code um: siginfo cleanup uml: Fix which_tmpdir failure when /dev/shm is a symlink, and in other edge cases um: Fix wait_stub_done() error handling um: Mark stub pages mapping with VM_PFNMAP um: Fix return value of strnlen_user() | 19 July 2013, 22:11:09 UTC |
| 1b05018 | Linus Torvalds | 19 July 2013, 22:10:01 UTC | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "MIPS fixes for 3.11. Half of then is for Netlogic the remainder touches things across arch/mips. Nothing really dramatic and by rc1 standards MIPS will be in fairly good shape with this applied. Tested by building all MIPS defconfigs of which with this pull request four platforms won't build. And yes, it boots also on my favorite test systems" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATION MIPS: Octeon: Fix DT pruning bug with pip ports MIPS: KVM: Mark KVM_GUEST (T&E KVM) as BROKEN_ON_SMP MIPS: tlbex: fix broken build in v3.11-rc1 MIPS: Netlogic: Add XLP PIC irqdomain MIPS: Netlogic: Fix USB block's coherent DMA mask MIPS: tlbex: Fix typo in r3000 tlb store handler MIPS: BMIPS: Fix thinko to release slave TP from reset MIPS: Delete dead invocation of exception_exit(). | 19 July 2013, 22:10:01 UTC |
| 89d0abe | Linus Torvalds | 19 July 2013, 22:08:53 UTC | Merge tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: - Post -rc1 update to the common reboot infrastructure. - Fixes (user cache maintenance fault handling, !COMPAT compilation, CPU online and interrupt hanlding). * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: use common reboot infrastructure arm64: mm: don't treat user cache maintenance faults as writes arm64: add '#ifdef CONFIG_COMPAT' for aarch32_break_handler() arm64: Only enable local interrupts after the CPU is marked online | 19 July 2013, 22:08:53 UTC |
| 89a8c59 | Linus Torvalds | 19 July 2013, 22:08:12 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "An update for the BFP jit to the latest and greatest, two patches to get kdump working again, the random-abort ptrace extention for transactional execution, the z90crypt module alias for ap and a tiny cleanup" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: Alias for new zcrypt device driver base module s390/kdump: Allow copy_oldmem_page() copy to virtual memory s390/kdump: Disable mmap for s390 s390/bpf,jit: add pkt_type support s390/bpf,jit: address randomize and write protect jit code s390/bpf,jit: use generic jit dumper s390/bpf,jit: call module_free() from any context s390/qdio: remove unused variable s390/ptrace: PTRACE_TE_ABORT_RAND | 19 July 2013, 22:08:12 UTC |
| 115930c | Stefan Behrens | 04 July 2013, 14:14:23 UTC | Btrfs: fix wrong write offset when replacing a device Miao Xie reported the following issue: The filesystem was corrupted after we did a device replace. Steps to reproduce: # mkfs.btrfs -f -m single -d raid10 <device0>..<device3> # mount <device0> <mnt> # btrfs replace start -rfB 1 <device4> <mnt> # umount <mnt> # btrfsck <device4> The reason for the issue is that we changed the write offset by mistake, introduced by commit 625f1c8dc. We read the data from the source device at first, and then write the data into the corresponding place of the new device. In order to implement the "-r" option, the source location is remapped using btrfs_map_block(). The read takes place on the mapped location, and the write needs to take place on the unmapped location. Currently the write is using the mapped location, and this commit changes it back by undoing the change to the write address that the aforementioned commit added by mistake. Reported-by: Miao Xie <miaox@cn.fujitsu.com> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com> | 19 July 2013, 19:07:26 UTC |
| d29a9f6 | Josef Bacik | 17 July 2013, 23:30:20 UTC | Btrfs: re-add root to dead root list if we stop dropping it If we stop dropping a root for whatever reason we need to add it back to the dead root list so that we will re-start the dropping next transaction commit. The other case this happens is if we recover a drop because we will add a root without adding it to the fs radix tree, so we can leak it's root and commit root extent buffer, adding this to the dead root list makes this cleanup happen. Thanks, Cc: stable@vger.kernel.org Reported-by: Alex Lyakas <alex.btrfs@zadarastorage.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> | 19 July 2013, 19:07:19 UTC |
| fec386a | Josef Bacik | 15 July 2013, 16:41:42 UTC | Btrfs: fix lock leak when resuming snapshot deletion We aren't setting path->locks[level] when we resume a snapshot deletion which means we won't unlock the buffer when we free the path. This causes deadlocks if we happen to re-allocate the block before we've evicted the extent buffer from cache. Thanks, Cc: stable@vger.kernel.org Reported-by: Alex Lyakas <alex.btrfs@zadarastorage.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> | 19 July 2013, 19:07:11 UTC |
| 3c8f242 | Josef Bacik | 15 July 2013, 15:57:06 UTC | Btrfs: update drop progress before stopping snapshot dropping Alex pointed out a problem and fix that exists in the drop one snapshot at a time patch. If we decide we need to exit for whatever reason (umount for example) we will just exit the snapshot dropping without updating the drop progress. So the next time we go to resume we will BUG_ON() because we can't find the extent we left off at because we never updated it. This patch fixes the problem. Cc: stable@vger.kernel.org Reported-by: Alex Lyakas <alex.btrfs@zadarastorage.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> | 19 July 2013, 19:07:03 UTC |
| b8a33fc | Linus Torvalds | 19 July 2013, 17:17:12 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fix from Paolo Bonzini: "This single patch fixes a regression caused by one of the optimizations introduced in 3.11, which is generally visible only on AMD processors" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: avoid fast page fault fixing mmio page fault | 19 July 2013, 17:17:12 UTC |
| b7356ab | Linus Torvalds | 19 July 2013, 16:59:06 UTC | Merge tag 'pm+acpi-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes collected over the last week, most importnatly two cpufreq reverts fixing regressions introduced in 3.10, an autoseelp fix preventing systems using it from crashing during shutdown and two ACPI scan fixes related to hotplug. Specifics: - Two cpufreq commits from the 3.10 cycle introduced regressions. The first of them was buggy (it did way much more than it needed to do) and the second one attempted to fix an issue introduced by the first one. Fixes from Srivatsa S Bhat revert both. - If autosleep triggers during system shutdown and the shutdown callbacks of some device drivers have been called already, it may crash the system. Fix from Liu Shuo prevents that from happening by making try_to_suspend() check system_state. - The ACPI memory hotplug driver doesn't clear its driver_data on errors which may cause a NULL poiter dereference to happen later. Fix from Toshi Kani. - The ACPI namespace scanning code should not try to attach scan handlers to device objects that have them already, which may confuse things quite a bit, and it should rescan the whole namespace branch starting at the given node after receiving a bus check notify event even if the device at that particular node has been discovered already. Fixes from Rafael J Wysocki. - New ACPI video blacklist entry for a system whose initial backlight setting from the BIOS doesn't make sense. From Lan Tianyu. - Garbage string output avoindance for ACPI PNP from Liu Shuo. - Two Kconfig fixes for issues introduced recently in the s3c24xx cpufreq driver (when moving the driver to drivers/cpufreq) from Paul Bolle. - Trivial comment fix in pm_wakeup.h from Chanwoo Choi" * tag 'pm+acpi-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: ignore BIOS initial backlight value for Fujitsu E753 PNP / ACPI: avoid garbage in resource name cpufreq: Revert commit 2f7021a8 to fix CPU hotplug regression cpufreq: s3c24xx: fix "depends on ARM_S3C24XX" in Kconfig cpufreq: s3c24xx: rename CONFIG_CPU_FREQ_S3C24XX_DEBUGFS PM / Sleep: Fix comment typo in pm_wakeup.h PM / Sleep: avoid 'autosleep' in shutdown progress cpufreq: Revert commit a66b2e to fix suspend/resume regression ACPI / memhotplug: Fix a stale pointer in error path ACPI / scan: Always call acpi_bus_scan() for bus check notifications ACPI / scan: Do not try to attach scan handlers to devices having them | 19 July 2013, 16:59:06 UTC |
| ff70130 | Marc Zyngier | 11 July 2013, 11:13:00 UTC | arm64: use common reboot infrastructure Commit 7b6d864b48d9 (reboot: arm: change reboot_mode to use enum reboot_mode) changed the way reboot is handled on arm, which has a direct impact on arm64 as we share the reset driver on the VE platform. The obvious fix is to move arm64 to use the same infrastructure. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> [catalin.marinas@arm.com: removed reboot_mode = REBOOT_HARD default setting] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 19 July 2013, 14:57:08 UTC |
| db6f410 | Will Deacon | 19 July 2013, 14:37:12 UTC | arm64: mm: don't treat user cache maintenance faults as writes On arm64, cache maintenance faults appear as data aborts with the CM bit set in the ESR. The WnR bit, usually used to distinguish between faulting loads and stores, always reads as 1 and (slightly confusingly) the instructions are treated as reads by the architecture. This patch fixes our fault handling code to treat cache maintenance faults in the same way as loads. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 19 July 2013, 14:49:44 UTC |
| c783c28 | Chen Gang | 24 June 2013, 09:27:49 UTC | arm64: add '#ifdef CONFIG_COMPAT' for aarch32_break_handler() If 'COMPAT' not defined, aarch32_break_handler() cannot pass compiling, and it can work independent with 'COMPAT', so remove dummy definition. The related error: arch/arm64/kernel/debug-monitors.c:249:5: error: redefinition of ‘aarch32_break_handler’ In file included from arch/arm64/kernel/debug-monitors.c:29:0: /root/linux-next/arch/arm64/include/asm/debug-monitors.h:89:12: note: previous definition of ‘aarch32_break_handler’ was here Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 19 July 2013, 14:49:43 UTC |
| 53ae3ac | Catalin Marinas | 19 July 2013, 14:08:15 UTC | arm64: Only enable local interrupts after the CPU is marked online There is a slight chance that (timer) interrupts are triggered before a secondary CPU has been marked online with implications on softirq thread affinity. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Kirill Tkhai <tkhai@yandex.ru> | 19 July 2013, 14:49:42 UTC |
| f1b7001 | Markos Chandras | 11 June 2013, 09:02:33 UTC | MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATION Virtualization does not always need KVM capabilities so drop the dependency. The KVM symbol already depends on HAVE_KVM. Fixes the following problem on a randconfig: warning: (REMOTEPROC && RPMSG) selects VIRTUALIZATION which has unmet direct dependencies (HAVE_KVM) warning: (REMOTEPROC && RPMSG) selects VIRTUALIZATION which has unmet direct dependencies (HAVE_KVM) Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5443/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 July 2013, 10:45:57 UTC |
| 9e82d45 | Richard Weinberger | 19 July 2013, 09:35:32 UTC | um: remove dead code "me" is not used. Signed-off-by: Richard Weinberger <richard@nod.at> | 19 July 2013, 09:35:32 UTC |
| 9a8c135 | Richard Weinberger | 19 July 2013, 09:31:36 UTC | um: siginfo cleanup Currently we use both struct siginfo and siginfo_t. Let's use struct siginfo internally to avoid ongoing compiler warning. We are allowed to do so because struct siginfo and siginfo_t are equivalent. Signed-off-by: Richard Weinberger <richard@nod.at> | 19 July 2013, 09:31:36 UTC |
| ab2bb14 | Faidon Liambotis | 11 July 2013, 21:08:09 UTC | MIPS: Octeon: Fix DT pruning bug with pip ports During the pruning of the device tree octeon_fdt_pip_iface() is called for each PIP interface and every port up to the port count is removed from the device tree. However, the count was set to the return value of cvmx_helper_interface_enumerate() which doesn't actually return the count but just returns zero on success. This effectively removed *all* ports from the tree. Use cvmx_helper_ports_on_interface() instead to fix this. This successfully restores the 3 ports of my ERLite-3 and fixes the "kernel assigns random MAC addresses" issue. Signed-off-by: Faidon Liambotis <paravoid@debian.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 July 2013, 09:04:54 UTC |
| 7473534 | Tristan Schmelcher | 08 July 2013, 20:19:49 UTC | uml: Fix which_tmpdir failure when /dev/shm is a symlink, and in other edge cases which_tmpdir did the wrong thing if /dev/shm was a symlink (e.g., to /run/shm), if there were multiple mounts on top of each other, if the mount(s) were obscured by a later mount, or if /dev/shm was a prefix of another mount point. This fixes these cases. Applies to 3.9.6. Signed-off-by: Tristan Schmelcher <tschmelcher@google.com> Signed-off-by: Richard Weinberger <richard@nod.at> | 19 July 2013, 08:45:18 UTC |
| 0974a9c | Richard Weinberger | 17 May 2013, 12:21:01 UTC | um: Fix wait_stub_done() error handling If we die within a stub handler we only way to reliable kill the (obviously) dying uml guest process is killing it's host twin on the host side. Signed-off-by: Richard Weinberger <richard@nod.at> | 19 July 2013, 08:45:18 UTC |
| dee2003 | Richard Weinberger | 12 May 2013, 21:26:03 UTC | um: Mark stub pages mapping with VM_PFNMAP Ensure that a process cannot destroy his stub pages with using MADV_DONTNEED and friends. Reported-by: toralf.foerster@gmx.de Signed-off-by: Richard Weinberger <richard@nod.at> | 19 July 2013, 08:45:17 UTC |
| 3179ce7 | Richard Weinberger | 11 May 2013, 13:35:32 UTC | um: Fix return value of strnlen_user() In case of an error it must not return -EFAULT. Return 0 like all other archs do. Reported-by: toralf.foerster@gmx.de Signed-off-by: Richard Weinberger <richard@nod.at> | 19 July 2013, 08:45:17 UTC |
| f2a5b1d | James Hogan | 12 July 2013, 10:26:11 UTC | MIPS: KVM: Mark KVM_GUEST (T&E KVM) as BROKEN_ON_SMP Make KVM_GUEST depend on BROKEN_ON_SMP so that it cannot be enabled with SMP. SMP kernels use ll/sc instructions for an atomic section in the tlb fill handler, with a tlbp instruction contained in the middle. This cannot be emulated with trap & emulate KVM because the tlbp instruction traps and the eret to return to the guest code clears the LLbit which makes the sc instruction always fail. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5588/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 July 2013, 08:41:17 UTC |
| 38a997a | Aaro Koskinen | 15 July 2013, 07:21:57 UTC | MIPS: tlbex: fix broken build in v3.11-rc1 Commit 6ba045f9fbdafb48da42aa8576ea7a3980443136 (MIPS: Move generated code to .text for microMIPS) deleted tlbmiss_handler_setup_pgd_array, but some references were not converted. Fix that to enable building a MIPS kernel. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Jayachandran C. <jchandra@broadcom.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 July 2013, 08:36:10 UTC |
| 628f065 | Jayachandran C | 17 July 2013, 10:27:26 UTC | MIPS: Netlogic: Add XLP PIC irqdomain Add a legacy irq domain for the XLP PIC interrupts. This will be used when interrupts are assigned from the device tree. This change is required after commit c5cdc67 "irqdomain: Remove temporary MIPS workaround code". Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Cc: Jayachandran C <jchandra@broadcom.com> Patchwork: https://patchwork.linux-mips.org/patch/5597/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 July 2013, 08:24:12 UTC |
| 35ac784 | Ganesan Ramalingam | 17 July 2013, 10:27:25 UTC | MIPS: Netlogic: Fix USB block's coherent DMA mask The on-chip USB controller on Netlogic XLP does not suppport DMA beyond 32-bit physical address. Set the coherent_dma_mask of the USB in its PCI fixup to support this. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C. <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5596/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 July 2013, 08:23:14 UTC |
| afc813a | Tony Wu | 18 July 2013, 09:45:47 UTC | MIPS: tlbex: Fix typo in r3000 tlb store handler commit 6ba045f (MIPS: Move generated code to .text for microMIPS) causes a panic at boot. The handler builder should test against handle_tlbs_end, not handle_tlbs. Signed-off-by: Tony Wu <tung7970@gmail.com> Acked-by: Jayachandran C. <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5600/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 July 2013, 08:18:07 UTC |
| 976f39b | Florian Fainelli | 17 July 2013, 17:56:31 UTC | MIPS: BMIPS: Fix thinko to release slave TP from reset Commit 4df715aa ["MIPS: BMIPS: support booting from physical CPU other than 0"] introduced a thinko which will prevents slave CPUs from being released from reset on systems where we boot from TP0. The problem is that we are checking whether the slave CPU logical CPU map is 0, which is never true for systems booting from TP0, so we do not release the slave TP from reset and we are just stuck. Fix this by properly checking that the CPU we intend to boot really is the physical slave CPU (logical and physical value being 1). Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: Florian Fainelli <florian@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/5598/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 July 2013, 08:09:59 UTC |
| 9da3545 | Ingo Tuchscherer | 18 July 2013, 14:28:26 UTC | s390/zcrypt: Alias for new zcrypt device driver base module The zcrypt device driver has been split into base/bus module, api-module, card modules and message type modules. The base module has been renamed from z90crypt to ap. A module alias (with the well-known z90crypt identifier) will be introduced that enable users to use their existing way to load the zcrypt device driver. Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 19 July 2013, 06:37:39 UTC |
| ecb2cf1 | Linus Torvalds | 19 July 2013, 03:08:47 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "A couple interesting SKB fragment handling fixes, plus the usual small bits here and there: 1) Fix 64-bit divide build failure on 32-bit platforms in mlx5, from Tim Gardner. 2) Get rid of a stupid reimplementation on "%*phC" in our sysfs MAC address printing helper. 3) Fix NETIF_F_SG capability advertisement in hyperv driver, if the device can't do checksumming offloads then it shouldn't say it can do SG either. From Haiyang Zhang. 4) bgmac needs to depend on PHYLIB, from Hauke Mehrtens. 5) Don't leak DMA mappings on mapping failures, from Neil Horman. 6) We need to reset the transport header of SKBs in ipv4 before we attempt to perform early socket demux, just like ipv6 does. From Eric Dumazet. 7) Add missing locking on vxlan device removal, from Stephen Hemminger. 8) xen-netfront has to make two passes over an SKB to prepare it for transfer. One pass calculates the number of slots needed, the second massages the SKB and fills the slots. Unfortunately, the first pass doesn't calculate the number of slots properly so we can end up trying to build a MAX_SKB_FRAGS + 1 SKB which doesn't work out so well. Fix from Jan Beulich with help and discussion with several others. 9) Fix a similar problem in tun and macvtap, which have to split up scatter-gather elements at PAGE_SIZE boundaries. Don't do zerocopy if it would result in a > MAX_SKB_FRAGS skb. Fixes from Jason Wang. 10) On receive, once we've decoded the VLAN state completely, clear skb->vlan_tci. Otherwise demuxed tunnels underneath can trigger the VLAN code again, corrupting the packet. Fix from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: vlan: fix a race in egress prio management vlan: mask vlan prio bits macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS pkt_sched: sch_qfq: remove a source of high packet delay/jitter xen-netfront: pull on receive skb may need to happen earlier vxlan: add necessary locking on device removal hyperv: Fix the NETIF_F_SG flag setting in netvsc net: Fix sysfs_format_mac() code duplication. be2net: Fix to avoid hardware workaround when not needed macvtap: do not assume 802.1Q when send vlan packets macvtap: fix the missing ret value of TUNSETQUEUE ipv4: set transport header earlier mlx5 core: Fix __udivdi3 when compiling for 32 bit arches bgmac: add dependency to phylib net/irda: fixed style issues in irlan_eth ethtool: fixed trailing statements in ethtool ndisc: bool initializations should use true and false atl1e: unmap partially mapped skb on dma error and free skb | 19 July 2013, 03:08:47 UTC |
| ee114b9 | Linus Torvalds | 19 July 2013, 00:39:05 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "Trying again to get the fixes queue, including the fixed IDT alignment patch. The UEFI patch is by far the biggest issue at hand: it is currently causing quite a few machines to boot. Which is sad, because the only reason they would is because their BIOSes touch memory that has already been freed. The other major issue is that we finally have tracked down the root cause of a significant number of machines failing to suspend/resume" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Make sure IDT is page aligned x86, suspend: Handle CPUs which fail to #GP on RDMSR x86/platform/ce4100: Add header file for reboot type Revert "UEFI: Don't pass boot services regions to SetVirtualAddressMap()" efivars: check for EFI_RUNTIME_SERVICES | 19 July 2013, 00:39:05 UTC |
| 4b8b8a4 | Linus Torvalds | 19 July 2013, 00:37:46 UTC | Merge tag 'md-3.11-fixes' of git://neil.brown.name/md Pull md bug fixes from NeilBrown: "Sorry boss, back at work now boss. Here's them nice shiny patches ya wanted. All nicely tagged and justified for -stable and everyfing: Three bug fixes for md in 3.10 3.10 wasn't a good release for md. The bio changes left a couple of bugs, and an md "fix" created another one. These three patches appear to fix the issues and have been tagged for -stable" * tag 'md-3.11-fixes' of git://neil.brown.name/md: md/raid1: fix bio handling problems in process_checks() md: Remove recent change which allows devices to skip recovery. md/raid10: fix two problems with RAID10 resync. | 19 July 2013, 00:37:46 UTC |
| 0a693ab | Linus Torvalds | 18 July 2013, 21:01:08 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "You'll be terribly disappointed in this, I'm not trying to sneak any features in or anything, its mostly radeon and intel fixes, a couple of ARM driver fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (34 commits) drm/radeon/dpm: add debugfs support for RS780/RS880 (v3) drm/radeon/dpm/atom: fix broken gcc harder drm/radeon/dpm/atom: restructure logic to work around a compiler bug drm/radeon/dpm: fix atom vram table parsing drm/radeon: fix an endian bug in atom table parsing drm/radeon: add a module parameter to disable aspm drm/rcar-du: Use the GEM PRIME helpers drm/shmobile: Use the GEM PRIME helpers uvesafb: Really allow mtrr being 0, as documented and warn()ed radeon kms: do not flush uninitialized hotplug work drm/radeon/dpm/sumo: handle boost states properly when forcing a perf level drm/radeon: align VM PTBs (Page Table Blocks) to 32K drm/radeon: allow selection of alignment in the sub-allocator drm/radeon: never unpin UVD bo v3 drm/radeon: fix UVD fence emit drm/radeon: add fault decode function for CIK drm/radeon: add fault decode function for SI (v2) drm/radeon: add fault decode function for cayman/TN (v2) drm/radeon: use radeon device for request firmware drm/radeon: add missing ttm_eu_backoff_reservation to radeon_bo_list_validate ... | 18 July 2013, 21:01:08 UTC |
| 3e3aac4 | Eric Dumazet | 18 July 2013, 16:35:10 UTC | vlan: fix a race in egress prio management egress_priority_map[] hash table updates are protected by rtnl, and we never remove elements until device is dismantled. We have to make sure that before inserting an new element in hash table, all its fields are committed to memory or else another cpu could find corrupt values and crash. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 July 2013, 20:07:13 UTC |
| d4b812d | Eric Dumazet | 18 July 2013, 14:19:26 UTC | vlan: mask vlan prio bits In commit 48cc32d38a52d0b68f91a171a8d00531edc6a46e ("vlan: don't deliver frames for unknown vlans to protocols") Florian made sure we set pkt_type to PACKET_OTHERHOST if the vlan id is set and we could find a vlan device for this particular id. But we also have a problem if prio bits are set. Steinar reported an issue on a router receiving IPv6 frames with a vlan tag of 4000 (id 0, prio 2), and tunneled into a sit device, because skb->vlan_tci is set. Forwarded frame is completely corrupted : We can see (8100:4000) being inserted in the middle of IPv6 source address : 16:48:00.780413 IP6 2001:16d8:8100:4000:ee1c:0:9d9:bc87 > 9f94:4d95:2001:67c:29f4::: ICMP6, unknown icmp6 type (0), length 64 0x0000: 0000 0029 8000 c7c3 7103 0001 a0ae e651 0x0010: 0000 0000 ccce 0b00 0000 0000 1011 1213 0x0020: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223 0x0030: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233 It seems we are not really ready to properly cope with this right now. We can probably do better in future kernels : vlan_get_ingress_priority() should be a netdev property instead of a per vlan_dev one. For stable kernels, lets clear vlan_tci to fix the bugs. Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 July 2013, 20:05:23 UTC |
| ece793f | Jason Wang | 18 July 2013, 02:55:16 UTC | macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS We try to linearize part of the skb when the number of iov is greater than MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest network. Solve this problem by calculate the pages needed for iov before trying to do zerocopy and switch to use copy instead of zerocopy if it needs more than MAX_SKB_FRAGS. This is done through introducing a new helper to count the pages for iov, and call uarg->callback() manually when switching from zerocopy to copy to notify vhost. We can do further optimization on top. This bug were introduced from b92946e2919134ebe2a4083e4302236295ea2a73 (macvtap: zerocopy: validate vectors before building skb). Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 July 2013, 20:04:25 UTC |
| 8852917 | Jason Wang | 18 July 2013, 02:55:15 UTC | tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS We try to linearize part of the skb when the number of iov is greater than MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest network. Solve this problem by calculate the pages needed for iov before trying to do zerocopy and switch to use copy instead of zerocopy if it needs more than MAX_SKB_FRAGS. This is done through introducing a new helper to count the pages for iov, and call uarg->callback() manually when switching from zerocopy to copy to notify vhost. We can do further optimization on top. The bug were introduced from commit 0690899b4d4501b3505be069b9a687e68ccbe15b (tun: experimental zero copy tx support) Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 July 2013, 20:04:25 UTC |
| 87f40dd | Paolo Valente | 16 July 2013, 06:52:30 UTC | pkt_sched: sch_qfq: remove a source of high packet delay/jitter QFQ+ inherits from QFQ a design choice that may cause a high packet delay/jitter and a severe short-term unfairness. As QFQ, QFQ+ uses a special quantity, the system virtual time, to track the service provided by the ideal system it approximates. When a packet is dequeued, this quantity must be incremented by the size of the packet, divided by the sum of the weights of the aggregates waiting to be served. Tracking this sum correctly is a non-trivial task, because, to preserve tight service guarantees, the decrement of this sum must be delayed in a special way [1]: this sum can be decremented only after that its value would decrease also in the ideal system approximated by QFQ+. For efficiency, QFQ+ keeps track only of the 'instantaneous' weight sum, increased and decreased immediately as the weight of an aggregate changes, and as an aggregate is created or destroyed (which, in its turn, happens as a consequence of some class being created/destroyed/changed). However, to avoid the problems caused to service guarantees by these immediate decreases, QFQ+ increments the system virtual time using the maximum value allowed for the weight sum, 2^10, in place of the dynamic, instantaneous value. The instantaneous value of the weight sum is used only to check whether a request of weight increase or a class creation can be satisfied. Unfortunately, the problems caused by this choice are worse than the temporary degradation of the service guarantees that may occur, when a class is changed or destroyed, if the instantaneous value of the weight sum was used to update the system virtual time. In fact, the fraction of the link bandwidth guaranteed by QFQ+ to each aggregate is equal to the ratio between the weight of the aggregate and the sum of the weights of the competing aggregates. The packet delay guaranteed to the aggregate is instead inversely proportional to the guaranteed bandwidth. By using the maximum possible value, and not the actual value of the weight sum, QFQ+ provides each aggregate with the worst possible service guarantees, and not with service guarantees related to the actual set of competing aggregates. To see the consequences of this fact, consider the following simple example. Suppose that only the following aggregates are backlogged, i.e., that only the classes in the following aggregates have packets to transmit: one aggregate with weight 10, say A, and ten aggregates with weight 1, say B1, B2, ..., B10. In particular, suppose that these aggregates are always backlogged. Given the weight distribution, the smoothest and fairest service order would be: A B1 A B2 A B3 A B4 A B5 A B6 A B7 A B8 A B9 A B10 A B1 A B2 ... QFQ+ would provide exactly this optimal service if it used the actual value for the weight sum instead of the maximum possible value, i.e., 11 instead of 2^10. In contrast, since QFQ+ uses the latter value, it serves aggregates as follows (easy to prove and to reproduce experimentally): A B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 A A A A A A A A A A B1 B2 ... B10 A A ... By replacing 10 with N in the above example, and by increasing N, one can increase at will the maximum packet delay and the jitter experienced by the classes in aggregate A. This patch addresses this issue by just using the above 'instantaneous' value of the weight sum, instead of the maximum possible value, when updating the system virtual time. After the instantaneous weight sum is decreased, QFQ+ may deviate from the ideal service for a time interval in the order of the time to serve one maximum-size packet for each backlogged class. The worst-case extent of the deviation exhibited by QFQ+ during this time interval [1] is basically the same as of the deviation described above (but, without this patch, QFQ+ suffers from such a deviation all the time). Finally, this patch modifies the comment to the function qfq_slot_insert, to make it coherent with the fact that the weight sum used by QFQ+ can now be lower than the maximum possible value. [1] P. Valente, "Extending WF2Q+ to support a dynamic traffic mix", Proceedings of AAA-IDEA'05, June 2005. Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 July 2013, 20:02:00 UTC |
| 7a62711 | Linus Torvalds | 18 July 2013, 19:48:40 UTC | Merge tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here are some driver core patches for 3.11-rc2. They aren't really bugfixes, but a bunch of new helper macros for drivers to properly create attribute groups, which drivers and subsystems need to fix up a ton of race issues with incorrectly creating sysfs files (binary and normal) after userspace has been told that the device is present. Also here is the ability to create binary files as attribute groups, to solve that race condition, which was impossible to do before this, so that's my fault the drivers were broken. The majority of the .c changes is indenting and moving code around a bit. It affects no existing code, but allows the large backlog of 70+ patches that I already have created to start flowing into the different subtrees, instead of having to live in my driver-core tree, causing merge nightmares in linux-next for the next few months. These were finalized too late for the -rc1 merge window, which is why they were didn't make that pull request, testing and review from others didn't happen until a few weeks ago, and then there's the whole distraction of the past few days, which prevented these from getting to you sooner, sorry about that. Oh, and there's a bugfix for the documentation build warning in here as well. All of these have been in linux-next this week, with no reported problems" * tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver-core: fix new kernel-doc warning in base/platform.c sysfs: use file mode defines from stat.h sysfs: add more helper macro's for (bin_)attribute(_groups) driver core: add default groups to struct class driver core: Introduce device_create_groups sysfs: prevent warning when only using binary attributes sysfs: add support for binary attributes in groups driver core: device.h: add RW and RO attribute macros sysfs.h: add BIN_ATTR macro sysfs.h: add ATTRIBUTE_GROUPS() macro sysfs.h: add __ATTR_RW() macro | 18 July 2013, 19:48:40 UTC |
| 5a8d281 | Rafael J. Wysocki | 18 July 2013, 19:47:00 UTC | Merge branch 'pm-fixes' * pm-fixes: cpufreq: Revert commit 2f7021a8 to fix CPU hotplug regression cpufreq: s3c24xx: fix "depends on ARM_S3C24XX" in Kconfig cpufreq: s3c24xx: rename CONFIG_CPU_FREQ_S3C24XX_DEBUGFS PM / Sleep: Fix comment typo in pm_wakeup.h PM / Sleep: avoid 'autosleep' in shutdown progress cpufreq: Revert commit a66b2e to fix suspend/resume regression | 18 July 2013, 19:47:00 UTC |
| fc0ad6c | Rafael J. Wysocki | 18 July 2013, 19:46:51 UTC | Merge branch 'acpi-fixes' * acpi-fixes: ACPI / video: ignore BIOS initial backlight value for Fujitsu E753 PNP / ACPI: avoid garbage in resource name ACPI / memhotplug: Fix a stale pointer in error path ACPI / scan: Always call acpi_bus_scan() for bus check notifications ACPI / scan: Do not try to attach scan handlers to devices having them | 18 July 2013, 19:46:51 UTC |
| 9657a56 | Lan Tianyu | 16 July 2013, 02:07:21 UTC | ACPI / video: ignore BIOS initial backlight value for Fujitsu E753 The BIOS of FUjitsu E753 reports an incorrect initial backlight value for WIN8 compatible OS, causing backlight to be dark during startup. This change causes the incorrect initial value from BIOS to be ignored. References: https://bugzilla.kernel.org/show_bug.cgi?id=60161 Reported-and-tested-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: 3.7+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 18 July 2013, 19:43:41 UTC |
| 5d88d15 | Linus Torvalds | 18 July 2013, 18:32:36 UTC | Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Single patch to staticize a local variable" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (abx500) Staticize abx500_temp_attributes | 18 July 2013, 18:32:36 UTC |
| 3f334c2 | Linus Torvalds | 18 July 2013, 17:50:26 UTC | Merge branch 'cpuinit_phase2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull phase two of __cpuinit removal from Paul Gortmaker: "With the __cpuinit infrastructure removed earlier, this group of commits only removes the function/data tagging that was done with the various (now no-op) __cpuinit related prefixes. Now that the dust has settled with yesterday's v3.11-rc1, there hopefully shouldn't be any new users leaking back in tree, but I think we can leave the harmless no-op stubs there for a release as a courtesy to those who still have out of tree stuff and weren't paying attention. Although the commits are against the recent tag to allow for minor context refreshes for things like yesterday's v3.11-rc1~ slab content, the patches have been largely unchanged for weeks, aside from such trivial updates. For detail junkies, the largely boring and mostly irrelevant history of the patches can be viewed at: http://git.kernel.org/cgit/linux/kernel/git/paulg/cpuinit-delete.git If nothing else, I guess it does at least demonstrate the level of involvement required to shepherd such a treewide change to completion. This is the same repository of patches that has been applied to the end of the daily linux-next branches for the past several weeks" * 'cpuinit_phase2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (28 commits) block: delete __cpuinit usage from all block files drivers: delete __cpuinit usage from all remaining drivers files kernel: delete __cpuinit usage from all core kernel files rcu: delete __cpuinit usage from all rcu files net: delete __cpuinit usage from all net files acpi: delete __cpuinit usage from all acpi files hwmon: delete __cpuinit usage from all hwmon files cpufreq: delete __cpuinit usage from all cpufreq files clocksource+irqchip: delete __cpuinit usage from all related files x86: delete __cpuinit usage from all x86 files score: delete __cpuinit usage from all score files xtensa: delete __cpuinit usage from all xtensa files openrisc: delete __cpuinit usage from all openrisc files m32r: delete __cpuinit usage from all m32r files hexagon: delete __cpuinit usage from all hexagon files frv: delete __cpuinit usage from all frv files cris: delete __cpuinit usage from all cris files metag: delete __cpuinit usage from all metag files tile: delete __cpuinit usage from all tile files sh: delete __cpuinit usage from all sh files ... | 18 July 2013, 17:50:26 UTC |
| c66bce9 | Linus Torvalds | 18 July 2013, 17:48:48 UTC | Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Except for a slightly big OMAP changes, all rest are small, mostly boring changes; all either 3.11 regression fixes or stable materials. - ASoC OMAP fixes due to non-DT OMAP4 removals - Other ASoC driver changes (sglt5000, wm8978, wm8948, samsung) - Fix missing locking for snd_pcm_stop() calls in many drivers - Fix the blocking request_module() in OSS sequencer - Fix old OSS vwsnd driver builds - Add a new HD-audio HDMI codec ID" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: seq-oss: Initialize MIDI clients asynchronously ALSA: hda - Add new GPU codec ID to snd-hda staging: line6: Fix unlocked snd_pcm_stop() call [media] saa7134: Fix unlocked snd_pcm_stop() call ASoC: s6000: Fix unlocked snd_pcm_stop() call ASoC: atmel: Fix unlocked snd_pcm_stop() call ALSA: pxa2xx: Fix unlocked snd_pcm_stop() call ALSA: usx2y: Fix unlocked snd_pcm_stop() call ALSA: ua101: Fix unlocked snd_pcm_stop() call ALSA: 6fire: Fix unlocked snd_pcm_stop() call ALSA: atiixp: Fix unlocked snd_pcm_stop() call ALSA: asihpi: Fix unlocked snd_pcm_stop() call sound: oss/vwsnd: Always define vwsnd_mutex sound: oss/vwsnd: Add missing inclusion of linux/delay.h ASoC: wm8978: enable symmetric rates ASoC: omap-mcbsp: Use different method for DMA request when booted with DT ASoC: omap-dmic: Do not use platform_get_resource_byname() for DMA ASoC: omap-mcpdm: Do not use platform_get_resource_byname() for DMA ASoC: omap-pcm: Request the DMA channel differently when DT is involved ASoC: Samsung: Set RFS and BFS in slave mode ... | 18 July 2013, 17:48:48 UTC |
| 191a2fa | Michael Holzheu | 18 July 2013, 10:18:27 UTC | s390/kdump: Allow copy_oldmem_page() copy to virtual memory The kdump mmap patch series (git commit 83086978c63afd7c73e1c) changed the requirements for copy_oldmem_page(). Now this function is used for copying to virtual memory. So implement vmalloc support for the s390 version of copy_oldmem_page(). Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 18 July 2013, 11:40:22 UTC |
| 5a74953 | Michael Holzheu | 18 July 2013, 10:17:57 UTC | s390/kdump: Disable mmap for s390 The kdump mmap patch series (git commit 83086978c63afd7c73e1c) directly map the PT_LOADs to memory. On s390 this does not work because the copy_from_oldmem() function swaps [0,crashkernel size] with [crashkernel base, crashkernel base+crashkernel size]. The swap int copy_from_oldmem() was done in order correctly implement /dev/oldmem. See: http://marc.info/?l=kexec&m=136940802511603&w=2 Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 18 July 2013, 11:40:18 UTC |
| c9a7afa | Heiko Carstens | 17 July 2013, 12:26:50 UTC | s390/bpf,jit: add pkt_type support s390 version of 3b58908a "x86: bpf_jit_comp: add pkt_type support". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> | 18 July 2013, 10:44:38 UTC |
| aa2d2c7 | Heiko Carstens | 16 July 2013, 11:25:49 UTC | s390/bpf,jit: address randomize and write protect jit code This is the s390 variant of 314beb9b "x86: bpf_jit_comp: secure bpf jit against spraying attacks". With this change the whole jit code and literal pool will be write protected after creation. In addition the start address of the jit code won't be always on a page boundary anymore. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 18 July 2013, 10:44:37 UTC |
| fee1b54 | Heiko Carstens | 16 July 2013, 08:36:06 UTC | s390/bpf,jit: use generic jit dumper This is the s390 backend of 79617801 "filter: bpf_jit_comp: refactor and unify BPF JIT image dump output". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 18 July 2013, 10:44:35 UTC |
| 1eeb747 | Heiko Carstens | 16 July 2013, 08:24:48 UTC | s390/bpf,jit: call module_free() from any context The workqueue workaround is no longer needed. Same as 5199dfe531 "sparc: bpf_jit_comp: can call module_free() from any context". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 18 July 2013, 10:44:34 UTC |
| 1c118b8 | Xiao Guangrong | 18 July 2013, 04:52:37 UTC | KVM: MMU: avoid fast page fault fixing mmio page fault Currently, fast page fault incorrectly tries to fix mmio page fault when the generation number is invalid (spte.gen != kvm.gen). It then returns to guest to retry the fault since it sees the last spte is nonpresent. This causes an infinite loop. Since fast page fault only works for direct mmu, the issue exists when 1) tdp is enabled. It is only triggered only on AMD host since on Intel host the mmio page fault is recognized as ept-misconfig whose handler call fault-page path with error_code = 0 2) guest paging is disabled. Under this case, the issue is hardly discovered since paging disable is short-lived and the sptes will be invalid after memslot changed for 150 times Fix it by filtering out MMIO page faults in page_fault_can_be_fast. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 18 July 2013, 10:26:57 UTC |
| 3668f0d | Dave Airlie | 18 July 2013, 10:04:50 UTC | Merge branch 'drm/3.11/fixes' of git://linuxtv.org/pinchartl/fbdev into drm-fixes Fixes builds * 'drm/3.11/fixes' of git://linuxtv.org/pinchartl/fbdev: drm/rcar-du: Use the GEM PRIME helpers drm/shmobile: Use the GEM PRIME helpers | 18 July 2013, 10:04:50 UTC |
| 30bc9b5 | NeilBrown | 17 July 2013, 05:19:29 UTC | md/raid1: fix bio handling problems in process_checks() Recent change to use bio_copy_data() in raid1 when repairing an array is faulty. The underlying may have changed the bio in various ways using bio_advance and these need to be undone not just for the 'sbio' which is being copied to, but also the 'pbio' (primary) which is being copied from. So perform the reset on all bios that were read from and do it early. This also ensure that the sbio->bi_io_vec[j].bv_len passed to memcmp is correct. This fixes a crash during a 'check' of a RAID1 array. The crash was introduced in 3.10 so this is suitable for 3.10-stable. Cc: stable@vger.kernel.org (3.10) Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: NeilBrown <neilb@suse.de> | 18 July 2013, 04:18:04 UTC |
| 5024c29 | NeilBrown | 17 July 2013, 04:55:31 UTC | md: Remove recent change which allows devices to skip recovery. commit 7ceb17e87bde79d285a8b988cfed9eaeebe60b86 md: Allow devices to be re-added to a read-only array. allowed a bit more than just that. It also allows devices to be added to a read-write array and to end up skipping recovery. This patch removes the offending piece of code pending a rewrite for a subsequent release. More specifically: If the array has a bitmap, then the device will still need a bitmap based resync ('saved_raid_disk' is set under different conditions is a bitmap is present). If the array doesn't have a bitmap, then this is correct as long as nothing has been written to the array since the metadata was checked by ->validate_super. However there is no locking to ensure that there was no write. Bug was introduced in 3.10 and causes data corruption so patch is suitable for 3.10-stable. Cc: stable@vger.kernel.org (3.10) Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: NeilBrown <neilb@suse.de> | 18 July 2013, 04:18:03 UTC |
| 7bb23c4 | NeilBrown | 16 July 2013, 06:50:47 UTC | md/raid10: fix two problems with RAID10 resync. 1/ When an different between blocks is found, data is copied from one bio to the other. However bv_len is used as the length to copy and this could be zero. So use r10_bio->sectors to calculate length instead. Using bv_len was probably always a bit dubious, but the introduction of bio_advance made it much more likely to be a problem. 2/ When preparing some blocks for sync, we don't set BIO_UPTODATE except on bios that we schedule for a read. This ensures that missing/failed devices don't confuse the loop at the top of sync_request write. Commit 8be185f2c9d54d6 "raid10: Use bio_reset()" removed a loop which set BIO_UPTDATE on all appropriate bios. So we need to re-add that flag. These bugs were introduced in 3.10, so this patch is suitable for 3.10-stable, and can remove a potential for data corruption. Cc: stable@vger.kernel.org (3.10) Reported-by: Brassow Jonathan <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de> | 18 July 2013, 04:18:01 UTC |
| fb328d7 | Dave Airlie | 18 July 2013, 00:19:46 UTC | Merge branch 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux more DPM fixes for radeon. * 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/dpm: add debugfs support for RS780/RS880 (v3) drm/radeon/dpm/atom: fix broken gcc harder drm/radeon/dpm/atom: restructure logic to work around a compiler bug drm/radeon/dpm: fix atom vram table parsing drm/radeon: fix an endian bug in atom table parsing drm/radeon: add a module parameter to disable aspm | 18 July 2013, 00:19:46 UTC |
| efaa14c | Aaron Lu | 16 July 2013, 05:08:05 UTC | ACPI / video: no automatic brightness changes by win8-compatible firmware Starting from win8, MS backlight control driver will set bit 2 of the parameter of control method _DOS, to inform firmware it should not perform any automatic brightness changes. This mostly affects hotkey notification deliver - if we do not set this bit, on hotkey press, firmware may choose to adjust brightness level instead of sending out notification and doing nothing. So this patch sets bit 2 when calling _DOS so that GUIs can show the notification window on hotkey press. This behavior change is only necessary for win8 systems. The MS document on win8 backlight control is here: http://msdn.microsoft.com/en-US/library/windows/hardware/jj159305 References: https://bugzilla.kernel.org/show_bug.cgi?id=52951 References: https://bugzilla.kernel.org/show_bug.cgi?id=56711 Reported-by: Micael Dias <kam1kaz3@gmail.com> Reported-by: Dan Garton <dan.garton@gmail.com> Reported-by: Bob Ziuchkovski <bob.ziuchkovski@gmail.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 18 July 2013, 00:08:16 UTC |
| 8c5bd7a | Rafael J. Wysocki | 18 July 2013, 00:08:06 UTC | ACPI / video / i915: No ACPI backlight if firmware expects Windows 8 According to Matthew Garrett, "Windows 8 leaves backlight control up to individual graphics drivers rather than making ACPI calls itself. There's plenty of evidence to suggest that the Intel driver for Windows [8] doesn't use the ACPI interface, including the fact that it's broken on a bunch of machines when the OS claims to support Windows 8. The simplest thing to do appears to be to disable the ACPI backlight interface on these systems". There's a problem with that approach, however, because simply avoiding to register the ACPI backlight interface if the firmware calls _OSI for Windows 8 may not work in the following situations: (1) The ACPI backlight interface actually works on the given system and the i915 driver is not loaded (e.g. another graphics driver is used). (2) The ACPI backlight interface doesn't work on the given system, but there is a vendor platform driver that will register its own, equally broken, backlight interface if not prevented from doing so by the ACPI subsystem. Therefore we need to allow the ACPI backlight interface to be registered until the i915 driver is loaded which then will unregister it if the firmware has called _OSI for Windows 8 (or will register the ACPI video driver without backlight support if not already present). For this reason, introduce an alternative function for registering ACPI video, acpi_video_register_with_quirks(), that will check whether or not the ACPI video driver has already been registered and whether or not the backlight Windows 8 quirk has to be applied. If the quirk has to be applied, it will block the ACPI backlight support and either unregister the backlight interface if the ACPI video driver has already been registered, or register the ACPI video driver without the backlight interface otherwise. Make the i915 driver use acpi_video_register_with_quirks() instead of acpi_video_register() in i915_driver_load(). This change is based on earlier patches from Matthew Garrett, Chun-Yi Lee and Seth Forshee and includes a fix from Aaron Lu's. References: https://bugzilla.kernel.org/show_bug.cgi?id=51231 Tested-by: Aaron Lu <aaron.lu@intel.com> Tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Tested-by: Yves-Alexis Perez <corsac@debian.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Matthew Garrett <matthew.garrett@nebula.com> | 18 July 2013, 00:08:06 UTC |
| 3c0fc07 | Liu ShuoX | 16 July 2013, 08:23:44 UTC | PNP / ACPI: avoid garbage in resource name Set temporary variable as 0 to avoid garbage string output from /proc/iomem after register resources and reset to PNP dev name later. Signed-off-by: Liu ShuoX <shuox.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 17 July 2013, 23:38:59 UTC |
| c04c697 | Matthew Garrett | 16 July 2013, 17:08:16 UTC | ACPI / video: Always call acpi_video_init_brightness() on init We have to call acpi_video_init_brightness() even if we're not going to initialise the backlight - Thinkpads seem to use this as the trigger for enabling ACPI notifications rather than handling it in firmware. [rjw: Drop the brightness object created by acpi_video_init_brightness() if we are not going to use it.] Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 17 July 2013, 23:31:47 UTC |
| 242b228 | Aaron Lu | 02 July 2013, 13:59:10 UTC | ACPICA: expose OSI version Expose acpi_gbl_osi_data so that code outside of ACPICA can check the value of the last successfull _OSI call. The definitions for OSI versions are moved to actypes.h so that other components can access them too. Based on a patch from Matthew Garrett which in turn was based on an earlier patch from Seth Forshee. [rjw: Changelog] Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 17 July 2013, 23:29:14 UTC |
