Revision 8e37395c3a5dceff62a5010ebbbc107f4145935c authored by Linus Torvalds on 20 October 2021, 16:13:22 UTC, committed by Linus Torvalds on 20 October 2021, 16:13:22 UTC
Pull sound fixes from Takashi Iwai: "Again it became bigger than wished, unfortunately, as this contains quite a few ASoC fixes that came up a bit late. It also includes yet more HD- and USB-audio quirks: I decided to merge them now, as those are for stable, and we'll need them sooner or later. Although the volumes are a bit high, all changes are device-specific (and reasonably small) fixes, so it should be safe for the late rc" * tag 'sound-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Fix microphone sound on Jieli webcam. ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset ALSA: hda/realtek: Add quirk for Clevo PC50HS ALSA: usb-audio: add Schiit Hel device to quirk table ASoC: wm8960: Fix clock configuration on slave mode ASoC: cs42l42: Ensure 0dB full scale volume is used for headsets ASoC: soc-core: fix null-ptr-deref in snd_soc_del_component_unlocked() ASoC: codec: wcd938x: Add irq config support ASoC: DAPM: Fix missing kctl change notifications ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional() ASoC: Intel: bytcht_es8316: Use temporary variable for struct device ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata() ASoC: wcd938x: Fix jack detection issue ASoC: nau8824: Fix headphone vs headset, button-press detection no longer working ASoC: cs4341: Add SPI device ID table ASoC: pcm179x: Add missing entries SPI to device ID table ASoC: fsl_xcvr: Fix channel swap issue with ARC ASoC: pcm512x: Mend accesses to the I2S_1 and I2S_2 registers
ucd9200.rst
Kernel driver ucd9200
=====================
Supported chips:
* TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
Prefixes: 'ucd9220', 'ucd9222', 'ucd9224', 'ucd9240', 'ucd9244', 'ucd9246',
'ucd9248'
Addresses scanned: -
Datasheets:
- http://focus.ti.com/lit/ds/symlink/ucd9220.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9222.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9224.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9240.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9244.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9246.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9248.pdf
Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
[From datasheets] UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and
UCD9248 are multi-rail, multi-phase synchronous buck digital PWM controllers
designed for non-isolated DC/DC power applications. The devices integrate
dedicated circuitry for DC/DC loop management with flash memory and a serial
interface to support configuration, monitoring and management.
This driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
Usage Notes
-----------
This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
details.
Platform data support
---------------------
The driver supports standard PMBus driver platform data. Please see
Documentation/hwmon/pmbus.rst for details.
Sysfs entries
-------------
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
======================= ========================================================
in1_label "vin".
in1_input Measured voltage. From READ_VIN register.
in1_min Minimum Voltage. From VIN_UV_WARN_LIMIT register.
in1_max Maximum voltage. From VIN_OV_WARN_LIMIT register.
in1_lcrit Critical minimum Voltage. VIN_UV_FAULT_LIMIT register.
in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT
register.
in1_min_alarm Voltage low alarm. From VIN_UV_WARNING status.
in1_max_alarm Voltage high alarm. From VIN_OV_WARNING status.
in1_lcrit_alarm Voltage critical low alarm. From VIN_UV_FAULT status.
in1_crit_alarm Voltage critical high alarm. From VIN_OV_FAULT status.
in[2-5]_label "vout[1-4]".
in[2-5]_input Measured voltage. From READ_VOUT register.
in[2-5]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[2-5]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in[2-5]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT
register.
in[2-5]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[2-5]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
in[2-5]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT
status.
in[2-5]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT
status.
curr1_label "iin".
curr1_input Measured current. From READ_IIN register.
curr[2-5]_label "iout[1-4]".
curr[2-5]_input Measured current. From READ_IOUT register.
curr[2-5]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
curr[2-5]_lcrit Critical minimum output current. From
IOUT_UC_FAULT_LIMIT register.
curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT
register.
curr[2-5]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
curr[2-5]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
power1_input Measured input power. From READ_PIN register.
power1_label "pin"
power[2-5]_input Measured output power. From READ_POUT register.
power[2-5]_label "pout[1-4]"
The number of output voltage, current, and power
attribute sets is determined by the number of enabled
rails. See chip datasheets for details.
temp[1-5]_input Measured temperatures. From READ_TEMPERATURE_1 and
READ_TEMPERATURE_2 registers.
temp1 is the chip internal temperature. temp[2-5] are
rail temperatures. temp[2-5] attributes are only
created for enabled rails. See chip datasheets for
details.
temp[1-5]_max Maximum temperature. From OT_WARN_LIMIT register.
temp[1-5]_crit Critical high temperature. From OT_FAULT_LIMIT register.
temp[1-5]_max_alarm Temperature high alarm.
temp[1-5]_crit_alarm Temperature critical high alarm.
fan1_input Fan RPM. ucd9240 only.
fan1_alarm Fan alarm. ucd9240 only.
fan1_fault Fan fault. ucd9240 only.
======================= ========================================================
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...