| 8e37395 | Linus Torvalds | 20 October 2021, 16:13:22 UTC | Merge tag 'sound-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Again it became bigger than wished, unfortunately, as this contains quite a few ASoC fixes that came up a bit late. It also includes yet more HD- and USB-audio quirks: I decided to merge them now, as those are for stable, and we'll need them sooner or later. Although the volumes are a bit high, all changes are device-specific (and reasonably small) fixes, so it should be safe for the late rc" * tag 'sound-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Fix microphone sound on Jieli webcam. ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset ALSA: hda/realtek: Add quirk for Clevo PC50HS ALSA: usb-audio: add Schiit Hel device to quirk table ASoC: wm8960: Fix clock configuration on slave mode ASoC: cs42l42: Ensure 0dB full scale volume is used for headsets ASoC: soc-core: fix null-ptr-deref in snd_soc_del_component_unlocked() ASoC: codec: wcd938x: Add irq config support ASoC: DAPM: Fix missing kctl change notifications ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional() ASoC: Intel: bytcht_es8316: Use temporary variable for struct device ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata() ASoC: wcd938x: Fix jack detection issue ASoC: nau8824: Fix headphone vs headset, button-press detection no longer working ASoC: cs4341: Add SPI device ID table ASoC: pcm179x: Add missing entries SPI to device ID table ASoC: fsl_xcvr: Fix channel swap issue with ARC ASoC: pcm512x: Mend accesses to the I2S_1 and I2S_2 registers | 20 October 2021, 16:13:22 UTC |
| 6da52de | Linus Torvalds | 20 October 2021, 16:11:17 UTC | Merge tag 'audit-pr-20211019' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fix from Paul Moore: "One small audit patch to add a pointer NULL check" * tag 'audit-pr-20211019' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: fix possible null-pointer dereference in audit_filter_rules | 20 October 2021, 16:11:17 UTC |
| fc9b289 | Linus Torvalds | 20 October 2021, 16:02:58 UTC | Merge tag 'trace-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Recursion fix for tracing. While cleaning up some of the tracing recursion protection logic, I discovered a scenario that the current design would miss, and would allow an infinite recursion. Removing an optimization trick that opened the hole fixes the issue and cleans up the code as well" * tag 'trace-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have all levels of checks prevent recursion | 20 October 2021, 16:02:58 UTC |
| 1e59977 | Linus Torvalds | 20 October 2021, 15:56:51 UTC | Merge tag 'nios2_fixes_for_v5.15_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux Pull nios2 fix from Dinh Nguyen: - Renamed CTL_STATUS to CTL_FSTATUS to fix a redefined warning * tag 'nios2_fixes_for_v5.15_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: NIOS2: irqflags: rename a redefined register name | 20 October 2021, 15:56:51 UTC |
| 0afe64b | Linus Torvalds | 20 October 2021, 15:52:10 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "Tools: - kvm_stat: do not show halt_wait_ns since it is not a cumulative statistic x86: - clean ups and fixes for bus lock vmexit and lazy allocation of rmaps - two fixes for SEV-ES (one more coming as soon as I get reviews) - fix for static_key underflow ARM: - Properly refcount pages used as a concatenated stage-2 PGD - Fix missing unlock when detecting the use of MTE+VM_SHARED" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SEV-ES: reduce ghcb_sa_len to 32 bits KVM: VMX: Remove redundant handling of bus lock vmexit KVM: kvm_stat: do not show halt_wait_ns KVM: x86: WARN if APIC HW/SW disable static keys are non-zero on unload Revert "KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET" KVM: SEV-ES: Set guest_state_protected after VMSA update KVM: X86: fix lazy allocation of rmaps KVM: SEV-ES: fix length of string I/O KVM: arm64: Release mmap_lock when using VM_SHARED with MTE KVM: arm64: Report corrupted refcount at EL2 KVM: arm64: Fix host stage-2 PGD refcount KVM: s390: Function documentation fixes | 20 October 2021, 15:52:10 UTC |
| d9abdee | Linus Torvalds | 19 October 2021, 15:41:36 UTC | Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "19 patches. Subsystems affected by this patch series: mm (userfaultfd, migration, memblock, mempolicy, slub, secretmem, and thp), ocfs2, binfmt, vfs, and misc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mailmap: add Andrej Shadura mm/thp: decrease nr_thps in file's mapping on THP split mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem() vfs: check fd has read access in kernel_read_file_from_fd() elfcore: correct reference to CONFIG_UML mm, slub: fix incorrect memcg slab count for bulk free mm, slub: fix potential use-after-free in slab_debugfs_fops mm, slub: fix potential memoryleak in kmem_cache_open() mm, slub: fix mismatch between reconstructed freelist depth and cnt mm, slub: fix two bugs in slab_debug_trace_open() mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind() memblock: check memory total_size ocfs2: mount fails with buffer overflow in strlen ocfs2: fix data corruption after conversion from inline format mm/migrate: fix CPUHP state to update node demotion order mm/migrate: add CPU hotplug to demotion #ifdef mm/migrate: optimize hotplug-time demotion order updates userfaultfd: fix a race between writeprotect and exit_mmap() mm/userfaultfd: selftests: fix memory corruption with thp enabled | 19 October 2021, 15:41:36 UTC |
| 362d5df | Andrej Shadura | 18 October 2021, 22:16:22 UTC | mailmap: add Andrej Shadura Add a mapping for my old work email for BelDisplayTech to the personal email, and make sure the Collabora email has the correct spelling of the first name. Link: https://lkml.kernel.org/r/20210917091016.30232-1-andrew.shadura@collabora.co.uk Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| 1ca7554 | Marek Szyprowski | 18 October 2021, 22:16:19 UTC | mm/thp: decrease nr_thps in file's mapping on THP split Decrease nr_thps counter in file's mapping to ensure that the page cache won't be dropped excessively on file write access if page has been already split. I've tried a test scenario running a big binary, kernel remaps it with THPs, then force a THP split with /sys/kernel/debug/split_huge_pages. During any further open of that binary with O_RDWR or O_WRITEONLY kernel drops page cache for it, because of non-zero thps counter. Link: https://lkml.kernel.org/r/20211012120237.2600-1-m.szyprowski@samsung.com Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 09d91cda0e82 ("mm,thp: avoid writes to file with THP in pagecache") Fixes: 06d3eff62d9d ("mm/thp: fix node page state in split_huge_page_to_list()") Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: <sfoon.kim@samsung.com> Cc: Song Liu <songliubraving@fb.com> Cc: Rik van Riel <riel@surriel.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| 79f9bc5 | Sean Christopherson | 18 October 2021, 22:16:16 UTC | mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem() Check for a NULL page->mapping before dereferencing the mapping in page_is_secretmem(), as the page's mapping can be nullified while gup() is running, e.g. by reclaim or truncation. BUG: kernel NULL pointer dereference, address: 0000000000000068 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 4173897 Comm: CPU 3/KVM Tainted: G W RIP: 0010:internal_get_user_pages_fast+0x621/0x9d0 Code: <48> 81 7a 68 80 08 04 bc 0f 85 21 ff ff 8 89 c7 be RSP: 0018:ffffaa90087679b0 EFLAGS: 00010046 RAX: ffffe3f37905b900 RBX: 00007f2dd561e000 RCX: ffffe3f37905b934 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffe3f37905b900 ... CR2: 0000000000000068 CR3: 00000004c5898003 CR4: 00000000001726e0 Call Trace: get_user_pages_fast_only+0x13/0x20 hva_to_pfn+0xa9/0x3e0 try_async_pf+0xa1/0x270 direct_page_fault+0x113/0xad0 kvm_mmu_page_fault+0x69/0x680 vmx_handle_exit+0xe1/0x5d0 kvm_arch_vcpu_ioctl_run+0xd81/0x1c70 kvm_vcpu_ioctl+0x267/0x670 __x64_sys_ioctl+0x83/0xa0 do_syscall_64+0x56/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lkml.kernel.org/r/20211007231502.3552715-1-seanjc@google.com Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas") Signed-off-by: Sean Christopherson <seanjc@google.com> Reported-by: Darrick J. Wong <djwong@kernel.org> Reported-by: Stephen <stephenackerman16@gmail.com> Tested-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| 032146c | Matthew Wilcox (Oracle) | 18 October 2021, 22:16:12 UTC | vfs: check fd has read access in kernel_read_file_from_fd() If we open a file without read access and then pass the fd to a syscall whose implementation calls kernel_read_file_from_fd(), we get a warning from __kernel_read(): if (WARN_ON_ONCE(!(file->f_mode & FMODE_READ))) This currently affects both finit_module() and kexec_file_load(), but it could affect other syscalls in the future. Link: https://lkml.kernel.org/r/20211007220110.600005-1-willy@infradead.org Fixes: b844f0ecbc56 ("vfs: define kernel_copy_file_from_fd()") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: Hao Sun <sunhao.th@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| b0e9012 | Lukas Bulwahn | 18 October 2021, 22:16:09 UTC | elfcore: correct reference to CONFIG_UML Commit 6e7b64b9dd6d ("elfcore: fix building with clang") introduces special handling for two architectures, ia64 and User Mode Linux. However, the wrong name, i.e., CONFIG_UM, for the intended Kconfig symbol for User-Mode Linux was used. Although the directory for User Mode Linux is ./arch/um; the Kconfig symbol for this architecture is called CONFIG_UML. Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs: UM Referencing files: include/linux/elfcore.h Similar symbols: UML, NUMA Correct the name of the config to the intended one. [akpm@linux-foundation.org: fix um/x86_64, per Catalin] Link: https://lkml.kernel.org/r/20211006181119.2851441-1-catalin.marinas@arm.com Link: https://lkml.kernel.org/r/YV6pejGzLy5ppEpt@arm.com Link: https://lkml.kernel.org/r/20211006082209.417-1-lukas.bulwahn@gmail.com Fixes: 6e7b64b9dd6d ("elfcore: fix building with clang") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Barret Rhoden <brho@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| 3ddd602 | Miaohe Lin | 18 October 2021, 22:16:06 UTC | mm, slub: fix incorrect memcg slab count for bulk free kmem_cache_free_bulk() will call memcg_slab_free_hook() for all objects when doing bulk free. So we shouldn't call memcg_slab_free_hook() again for bulk free to avoid incorrect memcg slab count. Link: https://lkml.kernel.org/r/20210916123920.48704-6-linmiaohe@huawei.com Fixes: d1b2cf6cb84a ("mm: memcg/slab: uncharge during kmem_cache_free_bulk()") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| 67823a5 | Miaohe Lin | 18 October 2021, 22:16:02 UTC | mm, slub: fix potential use-after-free in slab_debugfs_fops When sysfs_slab_add failed, we shouldn't call debugfs_slab_add() for s because s will be freed soon. And slab_debugfs_fops will use s later leading to a use-after-free. Link: https://lkml.kernel.org/r/20210916123920.48704-5-linmiaohe@huawei.com Fixes: 64dd68497be7 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| 9037c57 | Miaohe Lin | 18 October 2021, 22:15:59 UTC | mm, slub: fix potential memoryleak in kmem_cache_open() In error path, the random_seq of slub cache might be leaked. Fix this by using __kmem_cache_release() to release all the relevant resources. Link: https://lkml.kernel.org/r/20210916123920.48704-4-linmiaohe@huawei.com Fixes: 210e7a43fa90 ("mm: SLUB freelist randomization") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| 899447f | Miaohe Lin | 18 October 2021, 22:15:55 UTC | mm, slub: fix mismatch between reconstructed freelist depth and cnt If object's reuse is delayed, it will be excluded from the reconstructed freelist. But we forgot to adjust the cnt accordingly. So there will be a mismatch between reconstructed freelist depth and cnt. This will lead to free_debug_processing() complaining about freelist count or a incorrect slub inuse count. Link: https://lkml.kernel.org/r/20210916123920.48704-3-linmiaohe@huawei.com Fixes: c3895391df38 ("kasan, slub: fix handling of kasan_slab_free hook") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| 2127d22 | Miaohe Lin | 18 October 2021, 22:15:52 UTC | mm, slub: fix two bugs in slab_debug_trace_open() Patch series "Fixups for slub". This series contains various bug fixes for slub. We fix memoryleak, use-afer-free, NULL pointer dereferencing and so on in slub. More details can be found in the respective changelogs. This patch (of 5): It's possible that __seq_open_private() will return NULL. So we should check it before using lest dereferencing NULL pointer. And in error paths, we forgot to release private buffer via seq_release_private(). Memory will leak in these paths. Link: https://lkml.kernel.org/r/20210916123920.48704-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210916123920.48704-2-linmiaohe@huawei.com Fixes: 64dd68497be7 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| 6d2aec9 | Eric Dumazet | 18 October 2021, 22:15:49 UTC | mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind() syzbot reported access to unitialized memory in mbind() [1] Issue came with commit bda420b98505 ("numa balancing: migrate on fault among multiple bound nodes") This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in do_set_mempolicy() This patch moves the check in sanitize_mpol_flags() so that it is also used by mbind() [1] BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_alloc_node mm/slub.c:3221 [inline] slab_alloc mm/slub.c:3230 [inline] kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235 mpol_new mm/mempolicy.c:293 [inline] do_mbind+0x912/0x15f0 mm/mempolicy.c:1289 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae ===================================================== Kernel panic - not syncing: panic_on_kmsan set ... CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G B 5.15.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106 dump_stack+0x25/0x28 lib/dump_stack.c:113 panic+0x44f/0xdeb kernel/panic.c:232 kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186 __msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lkml.kernel.org/r/20211001215630.810592-1-eric.dumazet@gmail.com Fixes: bda420b98505 ("numa balancing: migrate on fault among multiple bound nodes") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| 5173ed7 | Peng Fan | 18 October 2021, 22:15:45 UTC | memblock: check memory total_size mem=[X][G|M] is broken on ARM64 platform, there are cases that even type.cnt is 1, but total_size is not 0 because regions are merged into 1. So only check 'cnt' is not enough, total_size should be used, othersize bootargs 'mem=[X][G|B]' not work anymore. Link: https://lkml.kernel.org/r/20210930024437.32598-1-peng.fan@oss.nxp.com Fixes: e888fa7bb882 ("memblock: Check memory add/cap ordering") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| b15fa92 | Valentin Vidic | 18 October 2021, 22:15:42 UTC | ocfs2: mount fails with buffer overflow in strlen Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the trace below. Problem seems to be that strings for cluster stack and cluster name are not guaranteed to be null terminated in the disk representation, while strlcpy assumes that the source string is always null terminated. This causes a read outside of the source string triggering the buffer overflow detection. detected buffer overflow in strlen ------------[ cut here ]------------ kernel BUG at lib/string.c:1149! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1 Debian 5.14.6-2 RIP: 0010:fortify_panic+0xf/0x11 ... Call Trace: ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2] ocfs2_fill_super+0x359/0x19b0 [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x454/0xa20 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lkml.kernel.org/r/20210929180654.32460-1-vvidic@valentin-vidic.from.hr Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| 5314454 | Jan Kara | 18 October 2021, 22:15:39 UTC | ocfs2: fix data corruption after conversion from inline format Commit 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") uncovered a latent bug in ocfs2 conversion from inline inode format to a normal inode format. The code in ocfs2_convert_inline_data_to_extents() attempts to zero out the whole cluster allocated for file data by grabbing, zeroing, and dirtying all pages covering this cluster. However these pages are beyond i_size, thus writeback code generally ignores these dirty pages and no blocks were ever actually zeroed on the disk. This oversight was fixed by commit 693c241a5f6a ("ocfs2: No need to zero pages past i_size.") for standard ocfs2 write path, inline conversion path was apparently forgotten; the commit log also has a reasoning why the zeroing actually is not needed. After commit 6dbf7bb55598, things became worse as writeback code stopped invalidating buffers on pages beyond i_size and thus these pages end up with clean PageDirty bit but with buffers attached to these pages being still dirty. So when a file is converted from inline format, then writeback triggers, and then the file is grown so that these pages become valid, the invalid dirtiness state is preserved, mark_buffer_dirty() does nothing on these pages (buffers are already dirty) but page is never written back because it is clean. So data written to these pages is lost once pages are reclaimed. Simple reproducer for the problem is: xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \ -c "pwrite 4000 2000" ocfs2_file After unmounting and mounting the fs again, you can observe that end of 'ocfs2_file' has lost its contents. Fix the problem by not doing the pointless zeroing during conversion from inline format similarly as in the standard write path. [akpm@linux-foundation.org: fix whitespace, per Joseph] Link: https://lkml.kernel.org/r/20210930095405.21433-1-jack@suse.cz Fixes: 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Gang He <ghe@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: "Markov, Andrey" <Markov.Andrey@Dell.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| a6a0251 | Huang Ying | 18 October 2021, 22:15:35 UTC | mm/migrate: fix CPUHP state to update node demotion order The node demotion order needs to be updated during CPU hotplug. Because whether a NUMA node has CPU may influence the demotion order. The update function should be called during CPU online/offline after the node_states[N_CPU] has been updated. That is done in CPUHP_AP_ONLINE_DYN during CPU online and in CPUHP_MM_VMSTAT_DEAD during CPU offline. But in commit 884a6e5d1f93 ("mm/migrate: update node demotion order on hotplug events"), the function to update node demotion order is called in CPUHP_AP_ONLINE_DYN during CPU online/offline. This doesn't satisfy the order requirement. For example, there are 4 CPUs (P0, P1, P2, P3) in 2 sockets (P0, P1 in S0 and P2, P3 in S1), the demotion order is - S0 -> NUMA_NO_NODE - S1 -> NUMA_NO_NODE After P2 and P3 is offlined, because S1 has no CPU now, the demotion order should have been changed to - S0 -> S1 - S1 -> NO_NODE but it isn't changed, because the order updating callback for CPU hotplug doesn't see the new nodemask. After that, if P1 is offlined, the demotion order is changed to the expected order as above. So in this patch, we added CPUHP_AP_MM_DEMOTION_ONLINE and CPUHP_MM_DEMOTION_DEAD to be called after CPUHP_AP_ONLINE_DYN and CPUHP_MM_VMSTAT_DEAD during CPU online and offline, and register the update function on them. Link: https://lkml.kernel.org/r/20210929060351.7293-1-ying.huang@intel.com Fixes: 884a6e5d1f93 ("mm/migrate: update node demotion order on hotplug events") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:03 UTC |
| 76af6a0 | Dave Hansen | 18 October 2021, 22:15:32 UTC | mm/migrate: add CPU hotplug to demotion #ifdef Once upon a time, the node demotion updates were driven solely by memory hotplug events. But now, there are handlers for both CPU and memory hotplug. However, the #ifdef around the code checks only memory hotplug. A system that has HOTPLUG_CPU=y but MEMORY_HOTPLUG=n would miss CPU hotplug events. Update the #ifdef around the common code. Add memory and CPU-specific #ifdefs for their handlers. These memory/CPU #ifdefs avoid unused function warnings when their Kconfig option is off. [arnd@arndb.de: rework hotplug_memory_notifier() stub] Link: https://lkml.kernel.org/r/20211013144029.2154629-1-arnd@kernel.org Link: https://lkml.kernel.org/r/20210924161255.E5FE8F7E@davehans-spike.ostc.intel.com Fixes: 884a6e5d1f93 ("mm/migrate: update node demotion order on hotplug events") Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:02 UTC |
| 295be91 | Dave Hansen | 18 October 2021, 22:15:29 UTC | mm/migrate: optimize hotplug-time demotion order updates Patch series "mm/migrate: 5.15 fixes for automatic demotion", v2. This contains two fixes for the "automatic demotion" code which was merged into 5.15: * Fix memory hotplug performance regression by watching suppressing any real action on irrelevant hotplug events. * Ensure CPU hotplug handler is registered when memory hotplug is disabled. This patch (of 2): == tl;dr == Automatic demotion opted for a simple, lazy approach to handling hotplug events. This noticeably slows down memory hotplug[1]. Optimize away updates to the demotion order when memory hotplug events should have no effect. This has no effect on CPU hotplug. There is no known problem on the CPU side and any work there will be in a separate series. == Background == Automatic demotion is a memory migration strategy to ensure that new allocations have room in faster memory tiers on tiered memory systems. The kernel maintains an array (node_demotion[]) to drive these migrations. The node_demotion[] path is calculated by starting at nodes with CPUs and then "walking" to nodes with memory. Only hotplug events which online or offline a node with memory (N_ONLINE) or CPUs (N_CPU) will actually affect the migration order. == Problem == However, the current code is lazy. It completely regenerates the migration order on *any* CPU or memory hotplug event. The logic was that these events are extremely rare and that the overhead from indiscriminate order regeneration is minimal. Part of the update logic involves a synchronize_rcu(), which is a pretty big hammer. Its overhead was large enough to be detected by some 0day tests that watch memory hotplug performance[1]. == Solution == Add a new helper (node_demotion_topo_changed()) which can differentiate between superfluous and impactful hotplug events. Skip the expensive update operation for superfluous events. == Aside: Locking == It took me a few moments to declare the locking to be safe enough for node_demotion_topo_changed() to work. It all hinges on the memory hotplug lock: During memory hotplug events, 'mem_hotplug_lock' is held for write. This ensures that two memory hotplug events can not be called simultaneously. CPU hotplug has a similar lock (cpuhp_state_mutex) which also provides mutual exclusion between CPU hotplug events. In addition, the demotion code acquire and hold the mem_hotplug_lock for read during its CPU hotplug handlers. This provides mutual exclusion between the demotion memory hotplug callbacks and the CPU hotplug callbacks. This effectively allows treating the migration target generation code to act as if it is single-threaded. 1. https://lore.kernel.org/all/20210905135932.GE15026@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/20210924161251.093CCD06@davehans-spike.ostc.intel.com Link: https://lkml.kernel.org/r/20210924161253.D7673E31@davehans-spike.ostc.intel.com Fixes: 884a6e5d1f93 ("mm/migrate: update node demotion order on hotplug events") Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reported-by: kernel test robot <oliver.sang@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:02 UTC |
| cb185d5 | Nadav Amit | 18 October 2021, 22:15:25 UTC | userfaultfd: fix a race between writeprotect and exit_mmap() A race is possible when a process exits, its VMAs are removed by exit_mmap() and at the same time userfaultfd_writeprotect() is called. The race was detected by KASAN on a development kernel, but it appears to be possible on vanilla kernels as well. Use mmget_not_zero() to prevent the race as done in other userfaultfd operations. Link: https://lkml.kernel.org/r/20210921200247.25749-1-namit@vmware.com Fixes: 63b2d4174c4ad ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl") Signed-off-by: Nadav Amit <namit@vmware.com> Tested-by: Li Wang <liwang@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:02 UTC |
| 8913970 | Peter Xu | 18 October 2021, 22:15:22 UTC | mm/userfaultfd: selftests: fix memory corruption with thp enabled In RHEL's gating selftests we've encountered memory corruption in the uffd event test even with upstream kernel: # ./userfaultfd anon 128 4 nr_pages: 32768, nr_pages_per_cpu: 32768 bounces: 3, mode: rnd racing read, userfaults: 6240 missing (6240) 14729 wp (14729) bounces: 2, mode: racing read, userfaults: 1444 missing (1444) 28877 wp (28877) bounces: 1, mode: rnd read, userfaults: 6055 missing (6055) 14699 wp (14699) bounces: 0, mode: read, userfaults: 82 missing (82) 25196 wp (25196) testing uffd-wp with pagemap (pgsize=4096): done testing uffd-wp with pagemap (pgsize=2097152): done testing events (fork, remap, remove): ERROR: nr 32427 memory corruption 0 1 (errno=0, line=963) ERROR: faulting process failed (errno=0, line=1117) It can be easily reproduced when global thp enabled, which is the default for RHEL. It's also known as a side effect of commit 0db282ba2c12 ("selftest: use mmap instead of posix_memalign to allocate memory", 2021-07-23), which is imho right itself on using mmap() to make sure the addresses will be untagged even on arm. The problem is, for each test we allocate buffers using two allocate_area() calls. We assumed these two buffers won't affect each other, however they could, because mmap() could have found that the two buffers are near each other and having the same VMA flags, so they got merged into one VMA. It won't be a big problem if thp is not enabled, but when thp is agressively enabled it means when initializing the src buffer it could accidentally setup part of the dest buffer too when there's a shared THP that overlaps the two regions. Then some of the dest buffer won't be able to be trapped by userfaultfd missing mode, then it'll cause memory corruption as described. To fix it, do release_pages() after initializing the src buffer. Since the previous two release_pages() calls are after uffd_test_ctx_clear() which will unmap all the buffers anyway (which is stronger than release pages; as unmap() also tear town pgtables), drop them as they shouldn't really be anything useful. We can mark the Fixes tag upon 0db282ba2c12 as it's reported to only happen there, however the real "Fixes" IMHO should be 8ba6e8640844, as before that commit we'll always do explicit release_pages() before registration of uffd, and 8ba6e8640844 changed that logic by adding extra unmap/map and we didn't release the pages at the right place. Meanwhile I don't have a solid glue anyway on whether posix_memalign() could always avoid triggering this bug, hence it's safer to attach this fix to commit 8ba6e8640844. Link: https://lkml.kernel.org/r/20210923232512.210092-1-peterx@redhat.com Fixes: 8ba6e8640844 ("userfaultfd/selftests: reinitialize test context in each test") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1994931 Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: Li Wang <liwan@redhat.com> Tested-by: Li Wang <liwang@redhat.com> Reviewed-by: Axel Rasmussen <axelrasmussen@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 October 2021, 06:22:02 UTC |
| 2966492 | Marco Giunta | 18 October 2021, 16:25:52 UTC | ALSA: usb-audio: Fix microphone sound on Jieli webcam. When a Jieli Technology USB Webcam is connected, the video part works well, but the mic sound is speeded up. On dmesg there are messages about different rates from the runtime rates, warnings about volume resolution and lastly, the log is filled, every 5 seconds, with retire_capture_urb error messages. The mic works only when ep packet size is set to wMaxPacketSize (normal sound and no more retire_capture_urb error messages). Skipping reading sample rate, fixes the messages about different rates and forcing a volume resolution, fixes warnings about volume range. I have arbitrarily choosed the value (16): I read in a comment that there should be no more than 255 levels, so 4096 (max volume) / 16 = 0-255. Signed-off-by: Marco Giunta <giun7a@gmail.com> Link: https://lore.kernel.org/r/20211018162552.12082-1-giun7a@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 October 2021, 06:07:01 UTC |
| 6e3ee99 | Gaosheng Cui | 16 October 2021, 07:23:50 UTC | audit: fix possible null-pointer dereference in audit_filter_rules Fix possible null-pointer dereference in audit_filter_rules. audit_filter_rules() error: we previously assumed 'ctx' could be null Cc: stable@vger.kernel.org Fixes: bf361231c295 ("audit: add saddr_fam filter field") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Paul Moore <paul@paul-moore.com> | 18 October 2021, 22:27:47 UTC |
| ed65df6 | Steven Rostedt (VMware) | 18 October 2021, 19:44:12 UTC | tracing: Have all levels of checks prevent recursion While writing an email explaining the "bit = 0" logic for a discussion on making ftrace_test_recursion_trylock() disable preemption, I discovered a path that makes the "not do the logic if bit is zero" unsafe. The recursion logic is done in hot paths like the function tracer. Thus, any code executed causes noticeable overhead. Thus, tricks are done to try to limit the amount of code executed. This included the recursion testing logic. Having recursion testing is important, as there are many paths that can end up in an infinite recursion cycle when tracing every function in the kernel. Thus protection is needed to prevent that from happening. Because it is OK to recurse due to different running context levels (e.g. an interrupt preempts a trace, and then a trace occurs in the interrupt handler), a set of bits are used to know which context one is in (normal, softirq, irq and NMI). If a recursion occurs in the same level, it is prevented*. Then there are infrastructure levels of recursion as well. When more than one callback is attached to the same function to trace, it calls a loop function to iterate over all the callbacks. Both the callbacks and the loop function have recursion protection. The callbacks use the "ftrace_test_recursion_trylock()" which has a "function" set of context bits to test, and the loop function calls the internal trace_test_and_set_recursion() directly, with an "internal" set of bits. If an architecture does not implement all the features supported by ftrace then the callbacks are never called directly, and the loop function is called instead, which will implement the features of ftrace. Since both the loop function and the callbacks do recursion protection, it was seemed unnecessary to do it in both locations. Thus, a trick was made to have the internal set of recursion bits at a more significant bit location than the function bits. Then, if any of the higher bits were set, the logic of the function bits could be skipped, as any new recursion would first have to go through the loop function. This is true for architectures that do not support all the ftrace features, because all functions being traced must first go through the loop function before going to the callbacks. But this is not true for architectures that support all the ftrace features. That's because the loop function could be called due to two callbacks attached to the same function, but then a recursion function inside the callback could be called that does not share any other callback, and it will be called directly. i.e. traced_function_1: [ more than one callback tracing it ] call loop_func loop_func: trace_recursion set internal bit call callback callback: trace_recursion [ skipped because internal bit is set, return 0 ] call traced_function_2 traced_function_2: [ only traced by above callback ] call callback callback: trace_recursion [ skipped because internal bit is set, return 0 ] call traced_function_2 [ wash, rinse, repeat, BOOM! out of shampoo! ] Thus, the "bit == 0 skip" trick is not safe, unless the loop function is call for all functions. Since we want to encourage architectures to implement all ftrace features, having them slow down due to this extra logic may encourage the maintainers to update to the latest ftrace features. And because this logic is only safe for them, remove it completely. [*] There is on layer of recursion that is allowed, and that is to allow for the transition between interrupt context (normal -> softirq -> irq -> NMI), because a trace may occur before the context update is visible to the trace recursion logic. Link: https://lore.kernel.org/all/609b565a-ed6e-a1da-f025-166691b5d994@linux.alibaba.com/ Link: https://lkml.kernel.org/r/20211018154412.09fcad3c@gandalf.local.home Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@hansenpartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Jisheng Zhang <jszhang@kernel.org> Cc: =?utf-8?b?546L6LSH?= <yun.wang@linux.alibaba.com> Cc: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> | 18 October 2021, 22:12:09 UTC |
| 9f1ee7b | Paolo Bonzini | 18 October 2021, 10:49:18 UTC | KVM: SEV-ES: reduce ghcb_sa_len to 32 bits The size of the GHCB scratch area is limited to 16 KiB (GHCB_SCRATCH_AREA_LIMIT), so there is no need for it to be a u64. This fixes a build error on 32-bit systems: i686-linux-gnu-ld: arch/x86/kvm/svm/sev.o: in function `sev_es_string_io: sev.c:(.text+0x110f): undefined reference to `__udivdi3' Cc: stable@vger.kernel.org Fixes: 019057bd73d1 ("KVM: SEV-ES: fix length of string I/O") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 18 October 2021, 18:07:19 UTC |
| d61863c | Hao Xiang | 15 October 2021, 11:59:21 UTC | KVM: VMX: Remove redundant handling of bus lock vmexit Hardware may or may not set exit_reason.bus_lock_detected on BUS_LOCK VM-Exits. Dealing with KVM_RUN_X86_BUS_LOCK in handle_bus_lock_vmexit could be redundant when exit_reason.basic is EXIT_REASON_BUS_LOCK. We can remove redundant handling of bus lock vmexit. Unconditionally Set exit_reason.bus_lock_detected in handle_bus_lock_vmexit(), and deal with KVM_RUN_X86_BUS_LOCK only in vmx_handle_exit(). Signed-off-by: Hao Xiang <hao.xiang@linux.alibaba.com> Message-Id: <1634299161-30101-1-git-send-email-hao.xiang@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 18 October 2021, 18:07:19 UTC |
| 01c7d26 | Christian Borntraeger | 06 October 2021, 12:17:24 UTC | KVM: kvm_stat: do not show halt_wait_ns Similar to commit 111d0bda8eeb ("tools/kvm_stat: Exempt time-based counters"), we should not show timer values in kvm_stat. Remove the new halt_wait_ns. Fixes: 87bcc5fa092f ("KVM: stats: Add halt_wait_ns stats for all architectures") Cc: Jing Zhang <jingzhangos@google.com> Cc: Stefan Raspl <raspl@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Stefan Raspl <raspl@linux.ibm.com> Message-Id: <20211006121724.4154-1-borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 18 October 2021, 18:07:18 UTC |
| 9139a7a | Sean Christopherson | 13 October 2021, 00:35:54 UTC | KVM: x86: WARN if APIC HW/SW disable static keys are non-zero on unload WARN if the static keys used to track if any vCPU has disabled its APIC are left elevated at module exit. Unlike the underflow case, nothing in the static key infrastructure will complain if a key is left elevated, and because an elevated key only affects performance, nothing in KVM will fail if either key is improperly incremented. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211013003554.47705-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 18 October 2021, 18:07:18 UTC |
| f7d8a19 | Sean Christopherson | 13 October 2021, 00:35:53 UTC | Revert "KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET" Revert a change to open code bits of kvm_lapic_set_base() when emulating APIC RESET to fix an apic_hw_disabled underflow bug due to arch.apic_base and apic_hw_disabled being unsyncrhonized when the APIC is created. If kvm_arch_vcpu_create() fails after creating the APIC, kvm_free_lapic() will see the initialized-to-zero vcpu->arch.apic_base and decrement apic_hw_disabled without KVM ever having incremented apic_hw_disabled. Using kvm_lapic_set_base() in kvm_lapic_reset() is also desirable for a potential future where KVM supports RESET outside of vCPU creation, in which case all the side effects of kvm_lapic_set_base() are needed, e.g. to handle the transition from x2APIC => xAPIC. Alternatively, KVM could temporarily increment apic_hw_disabled (and call kvm_lapic_set_base() at RESET), but that's a waste of cycles and would impact the performance of other vCPUs and VMs. The other subtle side effect is that updating the xAPIC ID needs to be done at RESET regardless of whether the APIC was previously enabled, i.e. kvm_lapic_reset() needs an explicit call to kvm_apic_set_xapic_id() regardless of whether or not kvm_lapic_set_base() also performs the update. That makes stuffing the enable bit at vCPU creation slightly more palatable, as doing so affects only the apic_hw_disabled key. Opportunistically tweak the comment to explicitly call out the connection between vcpu->arch.apic_base and apic_hw_disabled, and add a comment to call out the need to always do kvm_apic_set_xapic_id() at RESET. Underflow scenario: kvm_vm_ioctl() { kvm_vm_ioctl_create_vcpu() { kvm_arch_vcpu_create() { if (something_went_wrong) goto fail_free_lapic; /* vcpu->arch.apic_base is initialized when something_went_wrong is false. */ kvm_vcpu_reset() { kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event) { vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE | MSR_IA32_APICBASE_ENABLE; } } return 0; fail_free_lapic: kvm_free_lapic() { /* vcpu->arch.apic_base is not yet initialized when something_went_wrong is true. */ if (!(vcpu->arch.apic_base & MSR_IA32_APICBASE_ENABLE)) static_branch_slow_dec_deferred(&apic_hw_disabled); // <= underflow bug. } return r; } } } This (mostly) reverts commit 421221234ada41b4a9f0beeb08e30b07388bd4bd. Fixes: 421221234ada ("KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET") Reported-by: syzbot+9fc046ab2b0cf295a063@syzkaller.appspotmail.com Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211013003554.47705-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 18 October 2021, 18:07:18 UTC |
| baa1e5c | Peter Gonda | 15 October 2021, 17:32:22 UTC | KVM: SEV-ES: Set guest_state_protected after VMSA update The refactoring in commit bb18a6777465 ("KVM: SEV: Acquire vcpu mutex when updating VMSA") left behind the assignment to svm->vcpu.arch.guest_state_protected; add it back. Signed-off-by: Peter Gonda <pgonda@google.com> [Delta between v2 and v3 of Peter's patch, which had already been committed; the commit message is my own. - Paolo] Fixes: bb18a6777465 ("KVM: SEV: Acquire vcpu mutex when updating VMSA") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 18 October 2021, 18:07:17 UTC |
| fa13843 | Paolo Bonzini | 15 October 2021, 17:05:00 UTC | KVM: X86: fix lazy allocation of rmaps If allocation of rmaps fails, but some of the pointers have already been written, those pointers can be cleaned up when the memslot is freed, or even reused later for another attempt at allocating the rmaps. Therefore there is no need to WARN, as done for example in memslot_rmap_alloc, but the allocation *must* be skipped lest KVM will overwrite the previous pointer and will indeed leak memory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 18 October 2021, 18:07:17 UTC |
| 4cce60f | Randy Dunlap | 04 October 2021, 07:56:06 UTC | NIOS2: irqflags: rename a redefined register name Both arch/nios2/ and drivers/mmc/host/tmio_mmc.c define a macro with the name "CTL_STATUS". Change the one in arch/nios2/ to be "CTL_FSTATUS" (flags status) to eliminate the build warning. In file included from ../drivers/mmc/host/tmio_mmc.c:22: drivers/mmc/host/tmio_mmc.h:31: warning: "CTL_STATUS" redefined 31 | #define CTL_STATUS 0x1c arch/nios2/include/asm/registers.h:14: note: this is the location of the previous definition 14 | #define CTL_STATUS 0 Fixes: b31ebd8055ea ("nios2: Nios2 registers") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> | 18 October 2021, 16:22:59 UTC |
| 519d819 | Linus Torvalds | 18 October 2021, 06:00:13 UTC | Linux 5.15-rc6 | 18 October 2021, 06:00:13 UTC |
| cd079b1 | Linus Torvalds | 18 October 2021, 05:39:22 UTC | Merge tag 'libata-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull libata fixes from Damien Le Moal: "Two fixes for this cycle: - Fix a null pointer dereference in ahci-platform driver (from Hai) - Fix uninitialized variables in pata_legacy driver (from Dan)" * tag 'libata-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators() pata_legacy: fix a couple uninitialized variable bugs | 18 October 2021, 05:39:22 UTC |
| f2b3420 | Linus Torvalds | 18 October 2021, 05:25:20 UTC | Merge tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Bigger than usual for this point in time, the majority is fixing some issues around BDI lifetimes with the move from the request_queue to the disk in this release. In detail: - Series on draining fs IO for del_gendisk() (Christoph) - NVMe pull request via Christoph: - fix the abort command id (Keith Busch) - nvme: fix per-namespace chardev deletion (Adam Manzanares) - brd locking scope fix (Tetsuo) - BFQ fix (Paolo)" * tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block: block, bfq: reset last_bfqq_created on group change block: warn when putting the final reference on a registered disk brd: reduce the brd_devices_mutex scope kyber: avoid q->disk dereferences in trace points block: keep q_usage_counter in atomic mode after del_gendisk block: drain file system I/O on del_gendisk block: split bio_queue_enter from blk_queue_enter block: factor out a blk_try_enter_queue helper block: call submit_bio_checks under q_usage_counter nvme: fix per-namespace chardev deletion block/rnbd-clt-sysfs: fix a couple uninitialized variable bugs nvme-pci: Fix abort command id | 18 October 2021, 05:25:20 UTC |
| cc0af0a | Linus Torvalds | 18 October 2021, 05:20:13 UTC | Merge tag 'io_uring-5.15-2021-10-17' of git://git.kernel.dk/linux-block Pull io_uring fix from Jens Axboe: "Just a single fix for a wrong condition for grabbing a lock, a regression in this merge window" * tag 'io_uring-5.15-2021-10-17' of git://git.kernel.dk/linux-block: io_uring: fix wrong condition to grab uring lock | 18 October 2021, 05:20:13 UTC |
| 3bb50f8 | Linus Torvalds | 18 October 2021, 04:17:19 UTC | Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael Tsirkin: "Fixes up some issues in rc5" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-vdpa: Fix the wrong input in config_cb VDUSE: fix documentation underline warning Revert "virtio-blk: Add validation for block size in config space" vhost_vdpa: unset vq irq before freeing irq virtio: write back F_VERSION_1 before validate | 18 October 2021, 04:17:19 UTC |
| be9eb2f | Linus Torvalds | 18 October 2021, 04:01:32 UTC | Merge tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a bug where guests on P9 with interrupts passed through could get stuck in synchronize_irq(). - Fix a bug in KVM on P8 where secondary threads entering a guest would write outside their allocated stack. - Fix a bug in KVM on P8 where secondary threads could confuse the host offline code and cause the guest or host to crash. Thanks to Cédric Le Goater. * tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest() powerpc/xive: Discard disabled interrupts in get_irqchip_state() | 18 October 2021, 04:01:32 UTC |
| 6890aca | Linus Torvalds | 18 October 2021, 03:41:39 UTC | Merge tag 'objtool_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: - Update section headers before the respective relocations to not trigger a safety check in elftoolchain's implementation of libelf - Do not add garbage data to the .rela.orc_unwind_ip section * tag 'objtool_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Update section header before relocations objtool: Check for gelf_update_rel[a] failures | 18 October 2021, 03:41:39 UTC |
| f644750 | Linus Torvalds | 18 October 2021, 03:36:39 UTC | Merge tag 'edac_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: - Log the "correct" uncorrectable error count in the armada_xp driver * tag 'edac_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/armada-xp: Fix output of uncorrectable error counter | 18 October 2021, 03:36:39 UTC |
| 60ebc28 | Linus Torvalds | 18 October 2021, 03:34:18 UTC | Merge tag 'perf_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Borislav Petkov: - Add Sapphire Rapids to the list of CPUs supporting the SMI count MSR * tag 'perf_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/msr: Add Sapphire Rapids CPU support | 18 October 2021, 03:34:18 UTC |
| 424e7d8 | Linus Torvalds | 18 October 2021, 03:30:49 UTC | Merge tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Borislav Petkov: "Forwarded from Ard Biesheuvel through the tip tree. Ard will send stuff directly in the near future. Low priority fixes but fixes nonetheless: - update stub diagnostic print that is no longer accurate - avoid statically allocated buffer for CPER error record decoding - avoid sleeping on the efi_runtime semaphore when calling the ResetSystem EFI runtime service" * tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock() efi/cper: use stack buffer for error record decoding efi/libstub: Simplify "Exiting bootservices" message | 18 October 2021, 03:30:49 UTC |
| 89f6602 | Linus Torvalds | 18 October 2021, 03:27:22 UTC | Merge tag 'x86_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Do not enable AMD memory encryption in Kconfig by default due to shortcomings of some platforms, leading to boot failures. - Mask out invalid bits in the MXCSR for 32-bit kernels again because Thomas and I don't know how to mask out bits properly. Third time's the charm. * tag 'x86_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Mask out the invalid MXCSR bits properly x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically | 18 October 2021, 03:27:22 UTC |
| cf52ad5 | Linus Torvalds | 18 October 2021, 03:17:28 UTC | Merge tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core fixes for 5.15-rc6, all of which have been in linux-next for a while with no reported issues. They include: - kernfs negative dentry bugfix - simple pm bus fixes to resolve reported issues" * tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers: bus: Delete CONFIG_SIMPLE_PM_BUS drivers: bus: simple-pm-bus: Add support for probing simple bus only devices driver core: Reject pointless SYNC_STATE_ONLY device links kernfs: don't create a negative dentry if inactive node exists | 18 October 2021, 03:17:28 UTC |
| e3572df | Linus Torvalds | 18 October 2021, 03:14:00 UTC | Merge tag 'char-misc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 5.15-rc6 for reported issues that include: - habanalabs driver fixes - mei driver fixes and new ids - fpga new device ids - MAINTAINER file updates for fpga subsystem - spi module id table additions and fixes - fastrpc locking fixes - nvmem driver fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: eeprom: 93xx46: fix MODULE_DEVICE_TABLE nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells mei: hbm: drop hbm responses on early shutdown mei: me: add Ice Lake-N device id. eeprom: 93xx46: Add SPI device ID table eeprom: at25: Add SPI ID table misc: HI6421V600_IRQ should depend on HAS_IOMEM misc: fastrpc: Add missing lock before accessing find_vma() cb710: avoid NULL pointer subtraction misc: gehc: Add SPI ID table MAINTAINERS: Drop outdated FPGA Manager website MAINTAINERS: Add Hao and Yilun as maintainers habanalabs: fix resetting args in wait for CS IOCTL fpga: ice40-spi: Add SPI device ID table | 18 October 2021, 03:14:00 UTC |
| a563ae0 | Linus Torvalds | 18 October 2021, 03:10:00 UTC | Merge tag 'staging-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are a number of small IIO and staging driver fixes for 5.15-rc6. They include: - vc04_services bugfix for reported problem - r8188eu array underflow fix - iio driver fixes for a lot of tiny reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: prevent array underflow in rtw_hal_update_ra_mask() staging: vc04_services: shut up out-of-range warning iio: light: opt3001: Fixed timeout error when 0 lux iio: adis16480: fix devices that do not support sleep mode iio: mtk-auxadc: fix case IIO_CHAN_INFO_PROCESSED iio: adis16475: fix deadlock on frequency set iio: ssp_sensors: add more range checking in ssp_parse_dataframe() iio: ssp_sensors: fix error code in ssp_print_mcu_debug() iio: adc: ad7793: Fix IRQ flag iio: adc: ad7780: Fix IRQ flag iio: adc: ad7192: Add IRQ flag iio: adc: aspeed: set driver data when adc probe. iio: adc: rzg2l_adc: add missing clk_disable_unprepare() in rzg2l_adc_pm_runtime_resume() iio: adc: max1027: Fix the number of max1X31 channels iio: adc: max1027: Fix wrong shift with 12-bit devices iio: adc128s052: Fix the error handling path of 'adc128_probe()' iio: adc: rzg2l_adc: Fix -EBUSY timeout error return iio: accel: fxls8962af: return IRQ_HANDLED when fifo is flushed iio: dac: ti-dac5571: fix an error code in probe() | 18 October 2021, 03:10:00 UTC |
| b9e42b3 | Linus Torvalds | 18 October 2021, 03:06:31 UTC | Merge tag 'tty-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fix from Greg KH: "Here is a single 8250 Kconfig fix for 5.15-rc6 that resolves a regression that showed up in 5.15-rc1. It has been in linux-next for a while with no reported issues" * tag 'tty-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250: allow disabling of Freescale 16550 compile test | 18 October 2021, 03:06:31 UTC |
| ebf613a | Linus Torvalds | 18 October 2021, 03:02:00 UTC | Merge tag 'usb-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes that resolve a number of tiny issues. They include: - new USB serial driver ids - xhci driver fixes for a bunch of issues - musb error path fixes. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: musb: dsps: Fix the probe error path xhci: Enable trust tx length quirk for Fresco FL11 USB controller xhci: Fix command ring pointer corruption while aborting a command USB: xhci: dbc: fix tty registration race xhci: add quirk for host controllers that don't update endpoint DCS xhci: guard accesses to ep_state in xhci_endpoint_reset() USB: serial: qcserial: add EM9191 QDL support USB: serial: option: add Quectel EC200S-CN module support USB: serial: option: add prod. id for Quectel EG91 USB: serial: option: add Telit LE910Cx composition 0x1204 | 18 October 2021, 03:02:00 UTC |
| 12dbbfa | Linus Torvalds | 18 October 2021, 02:57:06 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a new product ID for the xpad joystick driver - fixes to resistive-adc-touch and snvs_pwrkey drivers - a change to touchscreen helpers to make clang happier * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: touchscreen - avoid bitwise vs logical OR warning Input: xpad - add support for another USB ID of Nacon GC-100 Input: resistive-adc-touch - fix division by zero error on z1 == 0 Input: snvs_pwrkey - add clk handling | 18 October 2021, 02:57:06 UTC |
| d29bd41 | Paolo Valente | 15 October 2021, 14:43:36 UTC | block, bfq: reset last_bfqq_created on group change Since commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"), BFQ maintains a per-group pointer to the last bfq_queue created. If such a queue, say bfqq, happens to move to a different group, then bfqq is no more a valid last bfq_queue created for its previous group. That pointer must then be cleared. Not resetting such a pointer may also cause UAF, if bfqq happens to also be freed after being moved to a different group. This commit performs this missing reset. As such it fixes commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"). Such a missing reset is most likely the cause of the crash reported in [1]. With some analysis, we found that this crash was due to the above UAF. And such UAF did go away with this commit applied [1]. Anyway, before this commit, that crash happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq: honor already-setup queue merges""). Yet commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") contains no error related with the above UAF, and can then be restored. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214503 Fixes: 430a67f9d616 ("block, bfq: merge bursts of newly-created queues") Tested-by: Grzegorz Kowal <custos.mentis@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20211015144336.45894-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk> | 17 October 2021, 13:03:02 UTC |
| a204176 | Christoph Hellwig | 14 October 2021, 13:02:31 UTC | block: warn when putting the final reference on a registered disk Warn when the last reference on a live disk is put without calling del_gendisk first. There are some BDI related bug reports that look like a case of this, so make sure we have the proper instrumentation to catch it. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211014130231.1468538-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> | 17 October 2021, 12:59:45 UTC |
| f7bf358 | Tetsuo Handa | 07 September 2021, 10:18:00 UTC | brd: reduce the brd_devices_mutex scope As with commit 8b52d8be86d72308 ("loop: reorder loop_exit"), unregister_blkdev() needs to be called first in order to avoid calling brd_alloc() from brd_probe() after brd_del_one() from brd_exit(). Then, we can avoid holding global mutex during add_disk()/del_gendisk() as with commit 1c500ad706383f1a ("loop: reduce the loop_ctl_mutex scope"). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/e205f13d-18ff-a49c-0988-7de6ea5ff823@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk> | 17 October 2021, 12:51:19 UTC |
| d999ade | Linus Torvalds | 16 October 2021, 18:11:07 UTC | Merge tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix 'perf test evsel' build error on !x86 architectures - Fix libperf's test_stat_cpu mixup of CPU numbers and CPU indexes - Output offsets for decompressed records, not just useless zeros * tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: libperf tests: Fix test_stat_cpu libperf test evsel: Fix build error on !x86 architectures perf report: Output non-zero offset for decompressed records | 16 October 2021, 18:11:07 UTC |
| ccfb5ce | Linus Torvalds | 16 October 2021, 17:57:13 UTC | Merge tag 'fixes-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fix from Mike Rapoport: "Fix handling of NOMAP regions with kmemleak. NOMAP regions don't have linear map entries so an attempt to scan these areas in kmemleak would fault. Prevent such faults by excluding NOMAP regions from kmemleak" * tag 'fixes-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock: exclude NOMAP regions from kmemleak | 16 October 2021, 17:57:13 UTC |
| 368a978 | Linus Torvalds | 16 October 2021, 17:51:41 UTC | Merge tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Tracing fixes for 5.15: - Fix defined but not use warning/error for osnoise function - Fix memory leak in event probe - Fix memblock leak in bootconfig - Fix the API of event probes to be like kprobes - Added test to check removal of event probe API - Fix recordmcount.pl for nds32 failed build * tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^' selftests/ftrace: Update test for more eprobe removal process tracing: Fix event probe removal from dynamic events tracing: Fix missing * in comment block bootconfig: init: Fix memblock leak in xbc_make_cmdline() tracing: Fix memory leak in eprobe_register() tracing: Fix missing osnoise tracer on max_latency | 16 October 2021, 17:51:41 UTC |
| 6985c40 | Linus Torvalds | 16 October 2021, 17:22:08 UTC | Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver fixes from Stephen Boyd: "Clk driver fixes for critical issues found in the past few weeks: - Select gdsc config so qcom sm6350 driver probes - Fix a register offset in qcom gcc-sm6115 so the correct clk is controlled - Fix inverted logic in Renesas RZ/G2L .is_enabled() - Mark some more clks critical in Renesas clk driver - Remove a duplicate clk in the agilex driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: add select QCOM_GDSC for SM6350 clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc clk: socfpga: agilex: fix duplicate s2f_user0_clk clk: renesas: rzg2l: Fix clk status function clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical | 16 October 2021, 17:22:08 UTC |
| dcd6198 | Linus Torvalds | 16 October 2021, 17:12:21 UTC | Merge tag 'for-5.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM verity target to skip redundant processing on I/O errors. - Fix request-based DM so that it doesn't queue request to blk-mq when DM device is suspended. - Fix DM core mempool NULL pointer race when completing IO. - Make DM clone target's 'descs' array static. * tag 'for-5.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix mempool NULL pointer race when completing IO dm rq: don't queue request to blk-mq during DM suspend dm clone: make array 'descs' static dm verity: skip redundant verity_handle_err() on I/O errors | 16 October 2021, 17:12:21 UTC |
| 304040f | Linus Torvalds | 16 October 2021, 16:14:55 UTC | Merge tag 's390-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Maintainers and reviewers changes: * Cornelia decided to free up her time and step down from vfio-ccw maintainer and s390 kvm reviewer duties * Add Alexander Gordeev as s390 arch code reviewer - Fix broken strrchr implementation * tag 's390-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: add Alexander Gordeev as reviewer s390: fix strrchr() implementation vfio-ccw: step down as maintainer KVM: s390: remove myself as reviewer | 16 October 2021, 16:14:55 UTC |
| c13f946 | Linus Torvalds | 16 October 2021, 16:12:18 UTC | Merge tag 'csky-for-linus-5.15-rc6' of git://github.com/c-sky/csky-linux Pull csky fixes from Guo Ren: "Only 5 fixups: - Make HAVE_TCM depend on !COMPILE_TEST - bitops: Remove duplicate __clear_bit define - Select ARCH_WANT_FRAME_POINTERS only if compiler supports it - Fixup regs.sr broken in ptrace - don't let sigreturn play with priveleged bits of status register" * tag 'csky-for-linus-5.15-rc6' of git://github.com/c-sky/csky-linux: csky: Make HAVE_TCM depend on !COMPILE_TEST csky: bitops: Remove duplicate __clear_bit define csky: Select ARCH_WANT_FRAME_POINTERS only if compiler supports it csky: Fixup regs.sr broken in ptrace csky: don't let sigreturn play with priveleged bits of status register | 16 October 2021, 16:12:18 UTC |
| 5fd01b7 | Linus Torvalds | 16 October 2021, 16:09:27 UTC | Merge tag 'arc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fix from Vineet Gupta: "Small fixlet for ARC" * tag 'arc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: fix potential build snafu | 16 October 2021, 16:09:27 UTC |
| f042981 | Linus Torvalds | 16 October 2021, 16:05:58 UTC | Merge tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A small number fixes this time, mostly touching actual code: - Add platform device for i.MX System Reset Controller (SRC) to fix a regression caused by fw_devlink change - A fixup for a boot regression caused by my own rework for the Qualcomm SCM driver - Multiple bugfixes for the Arm FFA and optee firmware drivers, addressing problems when they are built as a loadable module - Four dts bugfixes for the Broadcom SoC used in Raspberry pi, addressing VEC (video encoder), MDIO bus controller #address-cells/#size-cells, SDIO voltage and PCIe host bridge dtc warnings" * tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: imx: register reset controller from a platform driver iommu/arm: fix ARM_SMMU_QCOM compilation ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting tee: optee: Fix missing devices unregister during optee_remove ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states ARM: dts: bcm2711: fix MDIO #address- and #size-cells ARM: dts: bcm283x: Fix VEC address for BCM2711 firmware: arm_ffa: Fix __ffa_devices_unregister firmware: arm_ffa: Add missing remove callback to ffa_bus_type | 16 October 2021, 16:05:58 UTC |
| 5a7ee55 | Linus Torvalds | 16 October 2021, 16:00:46 UTC | Merge tag 'pci-v5.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: - Don't save msi_populate_sysfs() error code as dev->msi_irq_groups so we don't dereference the error code as a pointer (Wang Hai) * tag 'pci-v5.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/MSI: Handle msi_populate_sysfs() errors correctly | 16 October 2021, 16:00:46 UTC |
| 711c368 | Linus Torvalds | 16 October 2021, 15:45:46 UTC | Merge tag 'acpi-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Add a missing device ID to a quirk list in the suspend-to-idle support code" * tag 'acpi-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Include alternate AMDI0005 id in special behaviour | 16 October 2021, 15:45:46 UTC |
| b2381ac | Borislav Petkov | 15 October 2021, 10:46:25 UTC | x86/fpu: Mask out the invalid MXCSR bits properly This is a fix for the fix (yeah, /facepalm). The correct mask to use is not the negation of the MXCSR_MASK but the actual mask which contains the supported bits in the MXCSR register. Reported and debugged by Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: d298b03506d3 ("x86/fpu: Restore the masking out of reserved MXCSR bits") Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ser Olmy <ser.olmy@protonmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/YWgYIYXLriayyezv@intel.com | 16 October 2021, 10:37:50 UTC |
| a02dcde | Nathan Chancellor | 15 October 2021, 20:13:06 UTC | Input: touchscreen - avoid bitwise vs logical OR warning A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types: drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated. To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 16 October 2021, 05:22:54 UTC |
| 3378a07 | Michael Cullen | 15 October 2021, 20:17:50 UTC | Input: xpad - add support for another USB ID of Nacon GC-100 The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 16 October 2021, 05:11:04 UTC |
| fe0a7e3 | Oleksij Rempel | 16 October 2021, 04:12:06 UTC | Input: resistive-adc-touch - fix division by zero error on z1 == 0 For proper pressure calculation we need at least x and z1 to be non zero. Even worse, in case z1 we may run in to division by zero error. Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 16 October 2021, 05:11:03 UTC |
| d997cc1 | Uwe Kleine-König | 16 October 2021, 04:19:33 UTC | Input: snvs_pwrkey - add clk handling On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an associated clock. Accessing the registers requires that this clock is enabled. Binding the driver on at least i.MX7S and i.MX8MP while not having the clock enabled results in a complete hang of the machine. (This usually only happens if snvs_pwrkey is built as a module and the rtc-snvs driver isn't already bound because at bootup the required clk is on and only gets disabled when the clk framework disables unused clks late during boot.) This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add snvs clock to pwrkey"). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 16 October 2021, 05:11:01 UTC |
| c411080 | Christoph Hellwig | 12 October 2021, 09:33:01 UTC | kyber: avoid q->disk dereferences in trace points q->disk becomes invalid after the gendisk is removed. Work around this by caching the dev_t for the tracepoints. The real fix would be to properly tear down the I/O schedulers with the gendisk, but that is a much more invasive change. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211012093301.GA27795@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 16 October 2021, 03:02:57 UTC |
| aec89dc | Christoph Hellwig | 29 September 2021, 07:12:41 UTC | block: keep q_usage_counter in atomic mode after del_gendisk Don't switch back to percpu mode to avoid the double RCU grace period when tearing down SCSI devices. After removing the disk only passthrough commands can be send anyway. Suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-6-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 16 October 2021, 03:02:54 UTC |
| 8e141f9 | Christoph Hellwig | 29 September 2021, 07:12:40 UTC | block: drain file system I/O on del_gendisk Instead of delaying draining of file system I/O related items like the blk-qos queues, the integrity read workqueue and timeouts only when the request_queue is removed, do that when del_gendisk is called. This is important for SCSI where the upper level drivers that control the gendisk are separate entities, and the disk can be freed much earlier than the request_queue, or can even be unbound without tearing down the queue. Fixes: edb0872f44ec ("block: move the bdi from the request_queue to the gendisk") Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-5-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 16 October 2021, 03:02:50 UTC |
| a674153 | Christoph Hellwig | 29 September 2021, 07:12:39 UTC | block: split bio_queue_enter from blk_queue_enter To prepare for fixing a gendisk shutdown race, open code the blk_queue_enter logic in bio_queue_enter. This also removes the pointless flags translation. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-4-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 16 October 2021, 03:02:47 UTC |
| 1f14a09 | Christoph Hellwig | 29 September 2021, 07:12:38 UTC | block: factor out a blk_try_enter_queue helper Factor out the code to try to get q_usage_counter without blocking into a separate helper. Both to improve code readability and to prepare for splitting bio_queue_enter from blk_queue_enter. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-3-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 16 October 2021, 03:02:44 UTC |
| cc9c884 | Christoph Hellwig | 29 September 2021, 07:12:37 UTC | block: call submit_bio_checks under q_usage_counter Ensure all bios check the current values of the queue under freeze protection, i.e. to make sure the zero capacity set by del_gendisk is actually seen before dispatching to the driver. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210929071241.934472-2-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 16 October 2021, 03:02:36 UTC |
| be358af | Steven Rostedt | 14 October 2021, 18:35:07 UTC | nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^' I received a build failure for a new patch I'm working on the nds32 architecture, and when I went to test it, I couldn't get to my build error, because it failed to build with a bunch of: Error: invalid operands (*UND* and *UND* sections) for `^' issues with various files. Those files were temporary asm files that looked like: kernel/.tmp_mc_fork.s I decided to look deeper, and found that the "mc" portion of that name stood for "mcount", and was created by the recordmcount.pl script. One that I wrote over a decade ago. Once I knew the source of the problem, I was able to investigate it further. The way the recordmcount.pl script works (BTW, there's a C version that simply modifies the ELF object) is by doing an "objdump" on the object file. Looks for all the calls to "mcount", and creates an offset of those locations from some global variable it can use (usually a global function name, found with <.*>:). Creates a asm file that is a table of references to these locations, using the found variable/function. Compiles it and links it back into the original object file. This asm file is called ".tmp_mc_<object_base_name>.s". The problem here is that the objdump produced by the nds32 object file, contains things that look like: 0000159a <.L3^B1>: 159a: c6 00 beqz38 $r6, 159a <.L3^B1> 159a: R_NDS32_9_PCREL_RELA .text+0x159e 159c: 84 d2 movi55 $r6, #-14 159e: 80 06 mov55 $r0, $r6 15a0: ec 3c addi10.sp #0x3c Where ".L3^B1 is somehow selected as the "global" variable to index off of. Then the assembly file that holds the mcount locations looks like this: .section __mcount_loc,"a",@progbits .align 2 .long .L3^B1 + -5522 .long .L3^B1 + -5384 .long .L3^B1 + -5270 .long .L3^B1 + -5098 .long .L3^B1 + -4970 .long .L3^B1 + -4758 .long .L3^B1 + -4122 [...] And when it is compiled back to an object to link to the original object, the compile fails on the "^" symbol. Simple solution for now, is to have the perl script ignore using function symbols that have an "^" in the name. Link: https://lkml.kernel.org/r/20211014143507.4ad2c0f7@gandalf.local.home Cc: stable@vger.kernel.org Acked-by: Greentime Hu <green.hu@gmail.com> Fixes: fbf58a52ac088 ("nds32/ftrace: Add RECORD_MCOUNT support") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> | 16 October 2021, 02:44:16 UTC |
| c3ca31c | Vineet Gupta | 15 October 2021, 17:43:35 UTC | ARC: fix potential build snafu In the big pgtable header split, I inadvertently introduced a couple of duplicate symbols. Fixes: fe6cb7b043b69cd9 ("ARC: mm: disintegrate pgtable.h into levels and flags") Signed-off-by: Vineet Gupta <vgupta@kernel.org> | 16 October 2021, 01:06:32 UTC |
| e21e52a | Guenter Roeck | 17 September 2021, 04:38:38 UTC | csky: Make HAVE_TCM depend on !COMPILE_TEST Building csky:allmodconfig results in the following build errors. arch/csky/mm/tcm.c:9:2: error: #error "You should define ITCM_RAM_BASE" 9 | #error "You should define ITCM_RAM_BASE" | ^~~~~ arch/csky/mm/tcm.c:14:2: error: #error "You should define DTCM_RAM_BASE" 14 | #error "You should define DTCM_RAM_BASE" | ^~~~~ arch/csky/mm/tcm.c:18:2: error: #error "You should define correct DTCM_RAM_BASE" 18 | #error "You should define correct DTCM_RAM_BASE" This is seen with compile tests since those enable HAVE_TCM, but do not provide useful default values for ITCM_RAM_BASE or DTCM_RAM_BASE. Disable HAVE_TCM for commpile tests to avoid the error. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guo Ren <guoren@kernel.org> | 15 October 2021, 23:20:12 UTC |
| fb5d69a | Guenter Roeck | 17 September 2021, 04:38:37 UTC | csky: bitops: Remove duplicate __clear_bit define Building csky:allmodconfig results in the following build error. In file included from ./include/linux/bitops.h:33, from ./include/linux/log2.h:12, from kernel/bounds.c:13: ./arch/csky/include/asm/bitops.h:77: error: "__clear_bit" redefined Since commit 9248e52fec95 ("locking/atomic: simplify non-atomic wrappers"), __clear_bit is defined in include/asm-generic/bitops/non-atomic.h, and the define in the csky include file is no longer necessary or useful. Remove it. Fixes: 9248e52fec95 ("locking/atomic: simplify non-atomic wrappers") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guo Ren <guoren@kernel.org> | 15 October 2021, 23:20:12 UTC |
| aeba0b8 | Guenter Roeck | 17 September 2021, 04:38:36 UTC | csky: Select ARCH_WANT_FRAME_POINTERS only if compiler supports it Compiling csky:allmodconfig with an upstream C compiler results in the following error. csky-linux-gcc: error: unrecognized command-line option '-mbacktrace'; did you mean '-fbacktrace'? Select ARCH_WANT_FRAME_POINTERS only if gcc supports it to avoid the error. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guo Ren <guoren@kernel.org> | 15 October 2021, 23:20:12 UTC |
| af89eba | Guo Ren | 24 September 2021, 07:33:38 UTC | csky: Fixup regs.sr broken in ptrace gpr_get() return the entire pt_regs (include sr) to userspace, if we don't restore the C bit in gpr_set, it may break the ALU result in that context. So the C flag bit is part of gpr context, that's why riscv totally remove the C bit in the ISA. That makes sr reg clear from userspace to supervisor privilege. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org | 15 October 2021, 23:20:12 UTC |
| fbd63c0 | Al Viro | 24 September 2021, 00:35:42 UTC | csky: don't let sigreturn play with priveleged bits of status register csky restore_sigcontext() blindly overwrites regs->sr with the value it finds in sigcontext. Attacker can store whatever they want in there, which includes things like S-bit. Userland shouldn't be able to set that, or anything other than C flag (bit 0). Do the same thing other architectures with protected bits in flags register do - preserve everything that shouldn't be settable in user mode, picking the rest from the value saved is sigcontext. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org | 15 October 2021, 23:20:12 UTC |
| 011ace4 | Arnd Bergmann | 15 October 2021, 18:48:06 UTC | Merge tag 'imx-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.15, round 3: - Add platform device for i.MX System Reset Controller (SRC) to fix a regression caused by fw_devlink change. * tag 'imx-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: register reset controller from a platform driver Link: https://lore.kernel.org/r/20211015070017.GI22881@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 15 October 2021, 18:48:08 UTC |
| eadeb06 | Takashi Iwai | 15 October 2021, 15:43:46 UTC | Merge tag 'asoc-fix-v5.15-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.15 A colletion of smallish mostly driver specific fixes, the biggest thing here is fixing some of the core code to generate change notifications properly when writing to controls which will fix issues with UIs not showing the correct values. There's one build fix here with a slightly misleading changelog saying it's adding IRQ config support, it's adding a missing select of the regmap-irq code rather than adding a feature. | 15 October 2021, 15:43:46 UTC |
| 8fe31e0 | Linus Torvalds | 15 October 2021, 14:27:20 UTC | Merge tag 'gpio-fixes-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix module autoloading on gpio-74x164 after a revert of OF modaliases - fix problems with the bias setting in gpio-pca953x - fix a use-after-free bug in gpio-mockup by using software nodes * tag 'gpio-fixes-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: mockup: Convert to use software nodes gpio: pca953x: Improve bias setting gpio: 74x164: Add SPI device ID table | 15 October 2021, 14:27:20 UTC |
| 985f6ab | Linus Torvalds | 15 October 2021, 14:21:46 UTC | Merge tag 'spi-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small fixes. Mostly driver specific but there's one in the core which fixes a deadlock when adding devices on spi-mux that's triggered because spi-mux is a SPI device which is itself a SPI controller and so can instantiate devices when registered. We were using a global lock to protect against reusing chip selects but they're a per controller thing so moving the lock per controller resolves that" * tag 'spi-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi-mux: Fix false-positive lockdep splats spi: Fix deadlock when adding SPI controllers on SPI buses spi: bcm-qspi: clear MSPI spifie interrupt during probe spi: spi-nxp-fspi: don't depend on a specific node name erratum workaround spi: mediatek: skip delays if they are 0 spi: atmel: Fix PDC transfer setup bug spi: spidev: Add SPI ID table spi: Use 'flash' node name instead of 'spi-flash' in example | 15 October 2021, 14:21:46 UTC |
| ccb6a66 | Linus Torvalds | 15 October 2021, 14:20:18 UTC | Merge tag 'regulator-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "Just a trivial fix to the MAINTAINERS file for an update missed during conversion of the DT bindings to YAML format" * tag 'regulator-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: MAINTAINERS: rectify entry for SY8106A REGULATOR DRIVER | 15 October 2021, 14:20:18 UTC |
| 9e795d9 | Linus Torvalds | 15 October 2021, 14:13:00 UTC | Merge tag 'mtd/fixes-for-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fix from Miquel Raynal: "Raw NAND controller driver fix: - Qcom: Update code word value for raw reads (QPIC v2+)" * tag 'mtd/fixes-for-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: qcom: Update code word value for raw read | 15 October 2021, 14:13:00 UTC |
| 591a495 | Linus Torvalds | 15 October 2021, 14:09:09 UTC | Merge tag 'drm-fixes-2021-10-15-1' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "It has a few scattered msm and i915 fixes, a few core fixes and a mediatek feature revert. I've had to pick a bunch of patches into this, as the drm-misc-fixes tree had a bunch of vc4 patches I wasn't comfortable with sending to you at least as part of this, they were delayed due to your reverts. If it's really useful as fixes I'll do a separate pull. Summary: Core: - clamp fbdev size - edid cap blocks read to avoid out of bounds panel: - fix missing crc32 dependency msm: - Fix a new crash on dev file close if the dev file was opened when GPU is not loaded (such as missing fw in initrd) - Switch to single drm_sched_entity per priority level per drm_file to unbreak multi-context userspace - Serialize GMU access to fix GMU OOB errors - Various error path fixes - A couple integer overflow fixes - Fix mdp5 cursor plane WARNs i915: - Fix ACPI object leak - Fix context leak in user proto-context creation - Fix missing i915_sw_fence_fini call hyperv: - hide hw pointer nouveau: - fix engine selection bit r128: - fix UML build rcar-du: - unconncted LVDS regression fix mediatek: - revert CMDQ refinement patches" * tag 'drm-fixes-2021-10-15-1' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/panel: olimex-lcd-olinuxino: select CRC32 drm/r128: fix build for UML drm/nouveau/fifo: Reinstate the correct engine bit programming drm/hyperv: Fix double mouse pointers drm/fbdev: Clamp fbdev surface size if too large drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read drm/i915: Free the returned object of acpi_evaluate_dsm() drm/i915: Fix bug in user proto-context creation that leaked contexts drm: rcar-du: Don't create encoder for unconnected LVDS outputs drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling drm/msm/dsi: Fix an error code in msm_dsi_modeset_init() drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready drm/msm/dsi/phy: fix clock names in 28nm_8960 phy drm/msm/dpu: Fix address of SM8150 PINGPONG5 IRQ register drm/msm: Do not run snapshot on non-DPU devices drm/msm/a3xx: fix error handling in a3xx_gpu_init() drm/msm/a4xx: fix error handling in a4xx_gpu_init() drm/msm: Fix null pointer dereference on pointer edp drm/msm/mdp5: fix cursor-related warnings drm/msm: Avoid potential overflow in timeout_to_jiffies() ... | 15 October 2021, 14:09:09 UTC |
| 86a44e9 | Linus Torvalds | 15 October 2021, 13:58:11 UTC | Merge tag 'ntfs3_for_5.15' of git://github.com/Paragon-Software-Group/linux-ntfs3 Pull ntfs3 fixes from Konstantin Komarov: "Use the new api for mounting as requested by Christoph. Also fixed: - some memory leaks and panic - xfstests (tested on x86_64) generic/016 generic/021 generic/022 generic/041 generic/274 generic/423 - some typos, wrong returned error codes, dead code, etc" * tag 'ntfs3_for_5.15' of git://github.com/Paragon-Software-Group/linux-ntfs3: (70 commits) fs/ntfs3: Check for NULL pointers in ni_try_remove_attr_list fs/ntfs3: Refactor ntfs_read_mft fs/ntfs3: Refactor ni_parse_reparse fs/ntfs3: Refactor ntfs_create_inode fs/ntfs3: Refactor ntfs_readlink_hlp fs/ntfs3: Rework ntfs_utf16_to_nls fs/ntfs3: Fix memory leak if fill_super failed fs/ntfs3: Keep prealloc for all types of files fs/ntfs3: Remove unnecessary functions fs/ntfs3: Forbid FALLOC_FL_PUNCH_HOLE for normal files fs/ntfs3: Refactoring of ntfs_set_ea fs/ntfs3: Remove locked argument in ntfs_set_ea fs/ntfs3: Use available posix_acl_release instead of ntfs_posix_acl_release fs/ntfs3: Check for NULL if ATTR_EA_INFO is incorrect fs/ntfs3: Refactoring of ntfs_init_from_boot fs/ntfs3: Reject mount if boot's cluster size < media sector size fs/ntfs3: Refactoring lock in ntfs_init_acl fs/ntfs3: Change posix_acl_equiv_mode to posix_acl_update_mode fs/ntfs3: Pass flags to ntfs_set_ea in ntfs_set_acl_ex fs/ntfs3: Refactor ntfs_get_acl_ex for better readability ... | 15 October 2021, 13:58:11 UTC |
| cdeb5d7 | Michael Ellerman | 15 October 2021, 12:02:08 UTC | KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest We call idle_kvm_start_guest() from power7_offline() if the thread has been requested to enter KVM. We pass it the SRR1 value that was returned from power7_idle_insn() which tells us what sort of wakeup we're processing. Depending on the SRR1 value we pass in, the KVM code might enter the guest, or it might return to us to do some host action if the wakeup requires it. If idle_kvm_start_guest() is able to handle the wakeup, and enter the guest it is supposed to indicate that by returning a zero SRR1 value to us. That was the behaviour prior to commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C"), however in that commit the handling of SRR1 was reworked, and the zeroing behaviour was lost. Returning from idle_kvm_start_guest() without zeroing the SRR1 value can confuse the host offline code, causing the guest to crash and other weirdness. Fixes: 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211015133929.832061-2-mpe@ellerman.id.au | 15 October 2021, 13:40:03 UTC |
| 9b4416c | Michael Ellerman | 15 October 2021, 12:01:48 UTC | KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest() In commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") kvm_start_guest() became idle_kvm_start_guest(). The old code allocated a stack frame on the emergency stack, but didn't use the frame to store anything, and also didn't store anything in its caller's frame. idle_kvm_start_guest() on the other hand is written more like a normal C function, it creates a frame on entry, and also stores CR/LR into its callers frame (per the ABI). The problem is that there is no caller frame on the emergency stack. The emergency stack for a given CPU is allocated with: paca_ptrs[i]->emergency_sp = alloc_stack(limit, i) + THREAD_SIZE; So emergency_sp actually points to the first address above the emergency stack allocation for a given CPU, we must not store above it without first decrementing it to create a frame. This is different to the regular kernel stack, paca->kstack, which is initialised to point at an initial frame that is ready to use. idle_kvm_start_guest() stores the backchain, CR and LR all of which write outside the allocation for the emergency stack. It then creates a stack frame and saves the non-volatile registers. Unfortunately the frame it creates is not large enough to fit the non-volatiles, and so the saving of the non-volatile registers also writes outside the emergency stack allocation. The end result is that we corrupt whatever is at 0-24 bytes, and 112-248 bytes above the emergency stack allocation. In practice this has gone unnoticed because the memory immediately above the emergency stack happens to be used for other stack allocations, either another CPUs mc_emergency_sp or an IRQ stack. See the order of calls to irqstack_early_init() and emergency_stack_init(). The low addresses of another stack are the top of that stack, and so are only used if that stack is under extreme pressue, which essentially never happens in practice - and if it did there's a high likelyhood we'd crash due to that stack overflowing. Still, we shouldn't be corrupting someone else's stack, and it is purely luck that we aren't corrupting something else. To fix it we save CR/LR into the caller's frame using the existing r1 on entry, we then create a SWITCH_FRAME_SIZE frame (which has space for pt_regs) on the emergency stack with the backchain pointing to the existing stack, and then finally we switch to the new frame on the emergency stack. Fixes: 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211015133929.832061-1-mpe@ellerman.id.au | 15 October 2021, 13:39:54 UTC |
| cd932c2 | Greg Kroah-Hartman | 15 October 2021, 13:04:02 UTC | Merge tag 'usb-serial-5.15-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.15-rc6 Here are some new modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-5.15-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: qcserial: add EM9191 QDL support USB: serial: option: add Quectel EC200S-CN module support USB: serial: option: add prod. id for Quectel EG91 USB: serial: option: add Telit LE910Cx composition 0x1204 | 15 October 2021, 13:04:02 UTC |
| 71920ea | Kan Liang | 06 October 2021, 20:12:17 UTC | perf/x86/msr: Add Sapphire Rapids CPU support SMI_COUNT MSR is supported on Sapphire Rapids CPU. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1633551137-192083-1-git-send-email-kan.liang@linux.intel.com | 15 October 2021, 09:25:26 UTC |
| f427527 | Arnd Bergmann | 14 October 2021, 15:37:18 UTC | eeprom: 93xx46: fix MODULE_DEVICE_TABLE The newly added SPI device ID table does not work because the entry is incorrectly copied from the OF device table. During build testing, this shows as a compile failure when building it as a loadable module: drivers/misc/eeprom/eeprom_93xx46.c:424:1: error: redefinition of '__mod_of__eeprom_93xx46_of_table_device_table' MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table); Change the entry to refer to the correct symbol. Fixes: 137879f7ff23 ("eeprom: 93xx46: Add SPI device ID table") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211014153730.3821376-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 15 October 2021, 08:54:02 UTC |
| e2b6d94 | Paolo Bonzini | 15 October 2021, 08:47:55 UTC | Merge tag 'kvmarm-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.15, take #2 - Properly refcount pages used as a concatenated stage-2 PGD - Fix missing unlock when detecting the use of MTE+VM_SHARED | 15 October 2021, 08:47:55 UTC |
| 019057b | Paolo Bonzini | 12 October 2021, 15:07:59 UTC | KVM: SEV-ES: fix length of string I/O The size of the data in the scratch buffer is not divided by the size of each port I/O operation, so vcpu->arch.pio.count ends up being larger than it should be by a factor of size. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 15 October 2021, 08:47:36 UTC |
