d94befb | Davide Baldo | 15 October 2021, 07:21:22 UTC | ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers In laptop 'HP Spectre x360 Convertible 15-eb1xxx/8811' both front and rear speakers are silent, this patch fixes that by overriding the pin layout and by initializing the amplifier which needs a GPIO pin to be set to 1 then 0, similar to the existing HP Spectre x360 14 model. In order to have volume control, both front and rear speakers were forced to use the DAC1. This patch also correctly map the mute LED but since there is no microphone on/off switch exposed by the alsa subsystem it never turns on by itself. There are still known audio issues in this laptop: headset microphone doesn't work, the button to mute/unmute microphone is not yet mapped, the LED of the mute/unmute speakers doesn't seems to be exposed via GPIO and never turns on. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213953 Signed-off-by: Davide Baldo <davide@baldo.me> Link: https://lore.kernel.org/r/20211015072121.5287-1-davide@baldo.me Signed-off-by: Takashi Iwai <tiwai@suse.de> | 15 October 2021, 07:41:49 UTC |
3c414eb | Brendan Grieve | 15 October 2021, 02:53:35 UTC | ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset As per discussion at: https://github.com/szszoke/sennheiser-gsp670-pulseaudio-profile/issues/13 The GSP670 has 2 playback and 1 recording device that by default are detected in an incompatible order for alsa. This may have been done to make it compatible for the console by the manufacturer and only affects the latest firmware which uses its own ID. This quirk will resolve this by reordering the channels. Signed-off-by: Brendan Grieve <brendan@grieve.com.au> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211015025335.196592-1-brendan@grieve.com.au Signed-off-by: Takashi Iwai <tiwai@suse.de> | 15 October 2021, 07:27:41 UTC |
a14bc10 | Vegard Nossum | 12 October 2021, 11:52:42 UTC | drm/panel: olimex-lcd-olinuxino: select CRC32 Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe': panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le' Fixes: 17fd7a9d324fd ("drm/panel: Add support for Olimex LCD-OLinuXino panel") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.com Signed-off-by: Dave Airlie <airlied@redhat.com> | 15 October 2021, 05:05:13 UTC |
1a361b4 | Randy Dunlap | 11 October 2021, 08:00:06 UTC | drm/r128: fix build for UML Fix a build error on CONFIG_UML, which does not support (provide) wbinvd(). UML can use the generic mb() instead. ../drivers/gpu/drm/r128/ati_pcigart.c: In function ‘drm_ati_pcigart_init’: ../drivers/gpu/drm/r128/ati_pcigart.c:218:2: error: implicit declaration of function ‘wbinvd’ [-Werror=implicit-function-declaration] wbinvd(); ^~~~~~ Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: linux-um@lists.infradead.org Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211011080006.31081-1-rdunlap@infradead.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 15 October 2021, 05:05:10 UTC |
d1d94b0 | Marek Vasut | 07 October 2021, 21:41:17 UTC | drm/nouveau/fifo: Reinstate the correct engine bit programming Commit 64f7c698bea9 ("drm/nouveau/fifo: add engine_id hook") replaced fifo/chang84.c g84_fifo_chan_engine() call with an indirect call of fifo/g84.c g84_fifo_engine_id(). The G84_FIFO_ENGN_* values returned from the later g84_fifo_engine_id() are incremented by 1 compared to the previous g84_fifo_chan_engine() return values. This is fine either way for most of the code, except this one line where an engine bit programmed into the hardware is derived from the return value. Decrement the return value accordingly, otherwise the wrong engine bit is programmed into the hardware and that leads to the following failure: nouveau 0000:01:00.0: gr: 00000030 [ILLEGAL_MTHD ILLEGAL_CLASS] ch 1 [003fbce000 DRM] subc 3 class 0000 mthd 085c data 00000420 On the following hardware: lspci -s 01:00.0 01:00.0 VGA compatible controller: NVIDIA Corporation GT216GLM [Quadro FX 880M] (rev a2) lspci -ns 01:00.0 01:00.0 0300: 10de:0a3c (rev a2) Fixes: 64f7c698bea9 ("drm/nouveau/fifo: add engine_id hook") Signed-off-by: Marek Vasut <marex@denx.de> Cc: <stable@vger.kernel.org> # 5.12+ Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211007214117.231472-1-marex@denx.de Signed-off-by: Dave Airlie <airlied@redhat.com> | 15 October 2021, 05:04:58 UTC |
b253c30 | Dexuan Cui | 16 September 2021, 19:36:44 UTC | drm/hyperv: Fix double mouse pointers Hyper-V supports a hardware cursor feature. It is not used by Linux VM, but the Hyper-V host still draws a point as an extra mouse pointer, which is unwanted, especially when Xorg is running. The hyperv_fb driver uses synthvid_send_ptr() to hide the unwanted pointer. When the hyperv_drm driver was developed, the function synthvid_send_ptr() was not copied from the hyperv_fb driver. Fix the issue by adding the function into hyperv_drm. Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Deepak Rawat <drawat.floss@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210916193644.45650-1-decui@microsoft.com Signed-off-by: Dave Airlie <airlied@redhat.com> | 15 October 2021, 05:04:44 UTC |
b693e42 | Thomas Zimmermann | 05 October 2021, 07:03:55 UTC | drm/fbdev: Clamp fbdev surface size if too large Clamp the fbdev surface size of the available maximumi height to avoid failing to init console emulation. An example error is shown below. bad framebuffer height 2304, should be >= 768 && <= 768 [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 simple-framebuffer simple-framebuffer.0: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-22) This is especially a problem with drivers that have very small screen sizes and cannot over-allocate at all. v2: * reduce warning level (Ville) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Amanoel Dawod <kernel@amanoeldawod.com> Reported-by: Zoltán Kővágó <dirty.ice.hu@gmail.com> Reported-by: Michael Stapelberg <michael+lkml@stapelberg.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maxime Ripard <maxime@cerno.tech> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.14+ Link: https://patchwork.freedesktop.org/patch/msgid/20211005070355.7680-1-tzimmermann@suse.de Signed-off-by: Dave Airlie <airlied@redhat.com> | 15 October 2021, 05:04:05 UTC |
9779417 | Douglas Anderson | 06 October 2021, 02:29:08 UTC | drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read In commit e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid corruption test") the function connector_bad_edid() started assuming that the memory for the EDID passed to it was big enough to hold `edid[0x7e] + 1` blocks of data (1 extra for the base block). It completely ignored the fact that the function was passed `num_blocks` which indicated how much memory had been allocated for the EDID. Let's fix this by adding a bounds check. This is important for handling the case where there's an error in the first block of the EDID. In that case we will call connector_bad_edid() without having re-allocated memory based on `edid[0x7e]`. Fixes: e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid corruption test") Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211005192905.v2.1.Ib059f9c23c2611cb5a9d760e7d0a700c1295928d@changeid Signed-off-by: Dave Airlie <airlied@redhat.com> | 15 October 2021, 05:03:57 UTC |
6011106 | Dave Airlie | 15 October 2021, 05:02:52 UTC | Merge tag 'mediatek-drm-fixes-5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.15 1. Revert series "CMDQ refinement of Mediatek DRM driver" Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013235044.5488-1-chunkuang.hu@kernel.org | 15 October 2021, 05:02:57 UTC |
a1467fa | Philipp Zabel | 05 October 2021, 10:06:18 UTC | ARM: imx: register reset controller from a platform driver Starting with commit 6b2117ad65f1 ("of: property: fw_devlink: Add support for "resets" and "pwms""), the imx-drm driver fails to load due to forever dormant devlinks to the reset-controller node. This node was never associated with a struct device. Add a platform device to allow fw_devnode to activate the devlinks. Fixes: 6b2117ad65f1 ("of: property: fw_devlink: Add support for "resets" and "pwms"") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> | 15 October 2021, 01:38:06 UTC |
1483f0a | Dave Airlie | 15 October 2021, 00:00:48 UTC | Merge tag 'drm-intel-fixes-2021-10-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.15-rc6: - Fix ACPI object leak - Fix context leak in user proto-context creation - Fix missing i915_sw_fence_fini call Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87zgrbvgls.fsf@intel.com | 15 October 2021, 00:00:48 UTC |
ec681c5 | Linus Torvalds | 14 October 2021, 22:21:39 UTC | Merge tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Quite calm. The noisy DSA driver (embedded switches) changes, and adjustment to IPv6 IOAM behavior add to diffstat's bottom line but are not scary. Current release - regressions: - af_unix: rename UNIX-DGRAM to UNIX to maintain backwards compatibility - procfs: revert "add seq_puts() statement for dev_mcast", minor format change broke user space Current release - new code bugs: - dsa: fix bridge_num not getting cleared after ports leaving the bridge, resource leak - dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware bridges using VID 0, prevent packet drops if pvid is removed - dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW getting confused about station to VLAN mapping Previous releases - regressions: - virtio-net: fix for skb_over_panic inside big mode - phy: do not shutdown PHYs in READY state - dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link LED staying lit after ifdown - mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL) - mqprio: Correct stats in mqprio_dump_class_stats() - ice: fix deadlock for Tx timestamp tracking flush - stmmac: fix feature detection on old hardware Previous releases - always broken: - sctp: account stream padding length for reconf chunk - icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe() - isdn: cpai: check ctr->cnr to avoid array index out of bound - isdn: mISDN: fix sleeping function called from invalid context - nfc: nci: fix potential UAF of rf_conn_info object - dsa: microchip: prevent ksz_mib_read_work from kicking back in after it's canceled in .remove and crashing - dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged ports - dsa: sja1105, ocelot: break circular dependency between switch and tag drivers - dsa: felix: improve timestamping in presence of packe loss - mlxsw: thermal: fix out-of-bounds memory accesses Misc: - ipv6: ioam: move the check for undefined bits to improve interoperability" * tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits) icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe MAINTAINERS: Update the devicetree documentation path of imx fec driver sctp: account stream padding length for reconf chunk mlxsw: thermal: Fix out-of-bounds memory accesses ethernet: s2io: fix setting mac address during resume NFC: digital: fix possible memory leak in digital_in_send_sdd_req() NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() nfc: fix error handling of nfc_proto_register() Revert "net: procfs: add seq_puts() statement for dev_mcast" net: encx24j600: check error in devm_regmap_init_encx24j600 net: korina: select CRC32 net: arc: select CRC32 net: dsa: felix: break at first CPU port during init and teardown net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header net: mscc: ocelot: deny TX timestamping of non-PTP packets net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb ... | 14 October 2021, 22:21:39 UTC |
3ff6d64 | Shunsuke Nakamura | 11 October 2021, 08:37:04 UTC | libperf tests: Fix test_stat_cpu The `cpu` argument of perf_evsel__read() must specify the cpu index. perf_cpu_map__for_each_cpu() is for iterating the cpu number (not index) and is thus not appropriate for use with perf_evsel__read(). So, if there is an offline CPU, the cpu number specified in the argument may point out of range because the cpu number and the cpu index are different. Fix test_stat_cpu(). Testing it: # make tests -C tools/lib/perf/ make: Entering directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf' running static: - running tests/test-cpumap.c...OK - running tests/test-threadmap.c...OK - running tests/test-evlist.c...OK - running tests/test-evsel.c...OK running dynamic: - running tests/test-cpumap.c...OK - running tests/test-threadmap.c...OK - running tests/test-evlist.c...OK - running tests/test-evsel.c...OK make: Leaving directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf' Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20211011083704.4108720-1-nakamura.shun@fujitsu.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 14 October 2021, 18:41:35 UTC |
f304c8d | Shunsuke Nakamura | 06 October 2021, 09:57:03 UTC | libperf test evsel: Fix build error on !x86 architectures In test_stat_user_read, following build error occurs except i386 and x86_64 architectures: tests/test-evsel.c:129:31: error: variable 'pc' set but not used [-Werror=unused-but-set-variable] struct perf_event_mmap_page *pc; Fix build error. Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20211006095703.477826-1-nakamura.shun@fujitsu.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 14 October 2021, 18:41:35 UTC |
8e820f9 | Alexey Bayduraev | 29 September 2021, 09:14:45 UTC | perf report: Output non-zero offset for decompressed records Print offset of PERF_RECORD_COMPRESSED record instead of zero for decompressed records in raw trace dump (-D option of perf-report): 0x17cf08 [0x28]: event: 9 instead of: 0 [0x28]: event: 9 The fix is not critical, because currently file_pos for compressed events is used in perf_session__process_event only to show offsets in the raw dump. This patch was separated from patchset: https://lore.kernel.org/lkml/cover.1629186429.git.alexey.v.bayduraev@linux.intel.com/ and was already rewieved. Reviewed-by: Riccardo Mancini <rickyman7@gmail.com> Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Tested-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210929091445.18274-1-alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 14 October 2021, 18:41:35 UTC |
baa0ab2 | Jens Axboe | 14 October 2021, 15:07:14 UTC | Merge tag 'nvme-5.15-2021-10-14' of git://git.infradead.org/nvme into block-5.15 Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.15: - fix the abort command id (Keith Busch) - nvme: fix per-namespace chardev deletion (Adam Manzanares)" * tag 'nvme-5.15-2021-10-14' of git://git.infradead.org/nvme: nvme: fix per-namespace chardev deletion nvme-pci: Fix abort command id | 14 October 2021, 15:07:14 UTC |
14cfbb7 | Hao Xu | 14 October 2021, 14:04:00 UTC | io_uring: fix wrong condition to grab uring lock Grab uring lock when we are in io-worker rather than in the original or system-wq context since we already hold it in these two situation. Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> Fixes: b66ceaf324b3 ("io_uring: move iopoll reissue into regular IO path") Link: https://lore.kernel.org/r/20211014140400.50235-1-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 14 October 2021, 15:06:11 UTC |
1fcd794 | Xin Long | 14 October 2021, 09:50:50 UTC | icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe In icmp_build_probe(), the icmp_ext_echo_iio parsing should be done step by step and skb_header_pointer() return value should always be checked, this patch fixes 3 places in there: - On case ICMP_EXT_ECHO_CTYPE_NAME, it should only copy ident.name from skb by skb_header_pointer(), its len is ident_len. Besides, the return value of skb_header_pointer() should always be checked. - On case ICMP_EXT_ECHO_CTYPE_INDEX, move ident_len check ahead of skb_header_pointer(), and also do the return value check for skb_header_pointer(). - On case ICMP_EXT_ECHO_CTYPE_ADDR, before accessing iio->ident.addr. ctype3_hdr.addrlen, skb_header_pointer() should be called first, then check its return value and ident_len. On subcases ICMP_AFI_IP and ICMP_AFI_IP6, also do check for ident. addr.ctype3_hdr.addrlen and skb_header_pointer()'s return value. On subcase ICMP_AFI_IP, the len for skb_header_pointer() should be "sizeof(iio->extobj_hdr) + sizeof(iio->ident.addr.ctype3_hdr) + sizeof(struct in_addr)" or "ident_len". v1->v2: - To make it more clear, call skb_header_pointer() once only for iio->indent's parsing as Jakub Suggested. v2->v3: - The extobj_hdr.length check against sizeof(_iio) should be done before calling skb_header_pointer(), as Eric noticed. Fixes: d329ea5bd884 ("icmp: add response to RFC 8335 PROBE messages") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/31628dd76657ea62f5cf78bb55da6b35240831f1.1634205050.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 14 October 2021, 14:54:47 UTC |
ea142b0 | Cai Huoqing | 14 October 2021, 11:02:14 UTC | MAINTAINERS: Update the devicetree documentation path of imx fec driver Change the devicetree documentation path to "Documentation/devicetree/bindings/net/fsl,fec.yaml" since 'fsl-fec.txt' has been converted to 'fsl,fec.yaml' already. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20211014110214.3254-1-caihuoqing@baidu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 14 October 2021, 14:22:40 UTC |
a2d859e | Eiichi Tsukata | 13 October 2021, 20:27:29 UTC | sctp: account stream padding length for reconf chunk sctp_make_strreset_req() makes repeated calls to sctp_addto_chunk() which will automatically account for padding on each call. inreq and outreq are already 4 bytes aligned, but the payload is not and doing SCTP_PAD4(a + b) (which _sctp_make_chunk() did implicitly here) is different from SCTP_PAD4(a) + SCTP_PAD4(b) and not enough. It led to possible attempt to use more buffer than it was allocated and triggered a BUG_ON. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Greg KH <gregkh@linuxfoundation.org> Fixes: cc16f00f6529 ("sctp: add support for generating stream reconf ssn reset request chunk") Reported-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/b97c1f8b0c7ff79ac4ed206fc2c49d3612e0850c.1634156849.git.mleitner@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 14 October 2021, 14:15:22 UTC |
332fdf9 | Ido Schimmel | 12 October 2021, 17:49:55 UTC | mlxsw: thermal: Fix out-of-bounds memory accesses Currently, mlxsw allows cooling states to be set above the maximum cooling state supported by the driver: # cat /sys/class/thermal/thermal_zone2/cdev0/type mlxsw_fan # cat /sys/class/thermal/thermal_zone2/cdev0/max_state 10 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state # echo $? 0 This results in out-of-bounds memory accesses when thermal state transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the transition table is accessed with a too large index (state) [1]. According to the thermal maintainer, it is the responsibility of the driver to reject such operations [2]. Therefore, return an error when the state to be set exceeds the maximum cooling state supported by the driver. To avoid dead code, as suggested by the thermal maintainer [3], partially revert commit a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels") that tried to interpret these invalid cooling states (above the maximum) in a special way. The cooling levels array is not removed in order to prevent the fans going below 20% PWM, which would cause them to get stuck at 0% PWM. [1] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290 Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122 Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016 Workqueue: events_freezable_power_ thermal_zone_device_check Call Trace: dump_stack_lvl+0x8b/0xb3 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b thermal_cooling_device_stats_update+0x271/0x290 __thermal_cdev_update+0x15e/0x4e0 thermal_cdev_update+0x9f/0xe0 step_wise_throttle+0x770/0xee0 thermal_zone_device_update+0x3f6/0xdf0 process_one_work+0xa42/0x1770 worker_thread+0x62f/0x13e0 kthread+0x3ee/0x4e0 ret_from_fork+0x1f/0x30 Allocated by task 1: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 thermal_cooling_device_setup_sysfs+0x153/0x2c0 __thermal_cooling_device_register.part.0+0x25b/0x9c0 thermal_cooling_device_register+0xb3/0x100 mlxsw_thermal_init+0x5c5/0x7e0 __mlxsw_core_bus_device_register+0xcb3/0x19c0 mlxsw_core_bus_device_register+0x56/0xb0 mlxsw_pci_probe+0x54f/0x710 local_pci_probe+0xc6/0x170 pci_device_probe+0x2b2/0x4d0 really_probe+0x293/0xd10 __driver_probe_device+0x2af/0x440 driver_probe_device+0x51/0x1e0 __driver_attach+0x21b/0x530 bus_for_each_dev+0x14c/0x1d0 bus_add_driver+0x3ac/0x650 driver_register+0x241/0x3d0 mlxsw_sp_module_init+0xa2/0x174 do_one_initcall+0xee/0x5f0 kernel_init_freeable+0x45a/0x4de kernel_init+0x1f/0x210 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff8881052f7800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 1016 bytes inside of 1024-byte region [ffff8881052f7800, ffff8881052f7c00) The buggy address belongs to the page: page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0 head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x200000000010200(slab|head|node=0|zone=2) raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-1895-1fdc45c0244e@linaro.org/ [3] https://lore.kernel.org/linux-pm/af9857f2-578e-de3a-e62b-6baff7e69fd4@linaro.org/ CC: Daniel Lezcano <daniel.lezcano@linaro.org> Fixes: a50c1e35650b ("mlxsw: core: Implement thermal zone") Fixes: a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20211012174955.472928-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 14 October 2021, 14:13:26 UTC |
40507e7 | Arnd Bergmann | 13 October 2021, 14:35:49 UTC | ethernet: s2io: fix setting mac address during resume After recent cleanups, gcc started warning about a suspicious memcpy() call during the s2io_io_resume() function: In function '__dev_addr_set', inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:318:2, inlined from 's2io_set_mac_addr' at drivers/net/ethernet/neterion/s2io.c:5205:2, inlined from 's2io_io_resume' at drivers/net/ethernet/neterion/s2io.c:8569:7: arch/x86/include/asm/string_32.h:182:25: error: '__builtin_memcpy' accessing 6 bytes at offsets 0 and 2 overlaps 4 bytes at offset 2 [-Werror=restrict] 182 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n) | ^~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/netdevice.h:4648:9: note: in expansion of macro 'memcpy' 4648 | memcpy(dev->dev_addr, addr, len); | ^~~~~~ What apparently happened is that an old cleanup changed the calling conventions for s2io_set_mac_addr() from taking an ethernet address as a character array to taking a struct sockaddr, but one of the callers was not changed at the same time. Change it to instead call the low-level do_s2io_prog_unicast() function that still takes the old argument type. Fixes: 2fd376884558 ("S2io: Added support set_mac_address driver entry point") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211013143613.2049096-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 14 October 2021, 14:12:33 UTC |
26d6574 | Dinh Nguyen | 13 October 2021, 03:40:56 UTC | MAINTAINERS: Update entry for the Stratix10 firmware Richard Gong is no longer at Intel, so update the MAINTAINER's entry for the Stratix10 firmware drivers. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 October 2021, 13:55:45 UTC |
1626d9a | Linus Torvalds | 14 October 2021, 13:53:36 UTC | Merge tag 'sound-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This contains quite a few device-specific fixes for usual HD- and USB-audio in addition to a couple of ALSA core fixes (a UAF fix in sequencer and a fix for a misplaced PCM 32bit compat ioctl). Nothing really stands out" * tag 'sound-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add quirk for VF0770 ALSA: hda: avoid write to STATESTS if controller is in reset ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctl ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2 ALSA: hda: intel: Allow repeatedly probing on codec configuration errors ALSA: hda/realtek: Add quirk for TongFang PHxTxX1 ALSA: hda/realtek - ALC236 headset MIC recording issue ALSA: usb-audio: Enable rate validation for Scarlett devices ALSA: hda/realtek: Add quirk for Clevo X170KM-G ALSA: hda/realtek: Complete partial device name to avoid ambiguity ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254 ALSA: seq: Fix a potential UAF by wrong private_free call order ALSA: hda/realtek: Enable 4-speaker output for Dell Precision 5560 laptop ALSA: usb-audio: Fix a missing error check in scarlett gen2 mixer | 14 October 2021, 13:53:36 UTC |
aef454b | Steven Clarkson | 14 October 2021, 13:35:54 UTC | ALSA: hda/realtek: Add quirk for Clevo PC50HS Apply existing PCI quirk to the Clevo PC50HS and related models to fix audio output on the built in speakers. Signed-off-by: Steven Clarkson <sc@lambdal.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211014133554.1326741-1-sc@lambdal.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 14 October 2021, 13:41:42 UTC |
22390ce | Greg Kroah-Hartman | 14 October 2021, 11:17:50 UTC | ALSA: usb-audio: add Schiit Hel device to quirk table The Shciit Hel device responds to the ctl message for the mic capture switch with a timeout of -EPIPE: usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 This seems safe to ignore as the device works properly with the control message quirk, so add it to the quirk table so all is good. Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/YWgR3nOI1osvr5Yo@kroah.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 14 October 2021, 12:39:06 UTC |
16a8e2f | Uwe Kleine-König | 13 October 2021, 13:37:10 UTC | spi-mux: Fix false-positive lockdep splats io_mutex is taken by spi_setup() and spi-mux's .setup() callback calls spi_setup() which results in a nested lock of io_mutex. add_lock is taken by spi_add_device(). The device_add() call in there can result in calling spi-mux's .probe() callback which registers its own spi controller which in turn results in spi_add_device() being called again. To fix this initialize the controller's locks already in spi_alloc_controller() to give spi_mux_probe() a chance to set the lockdep subclass. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211013133710.2679703-2-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> | 14 October 2021, 12:32:19 UTC |
6098475 | Mark Brown | 08 October 2021, 13:31:57 UTC | spi: Fix deadlock when adding SPI controllers on SPI buses Currently we have a global spi_add_lock which we take when adding new devices so that we can check that we're not trying to reuse a chip select that's already controlled. This means that if the SPI device is itself a SPI controller and triggers the instantiation of further SPI devices we trigger a deadlock as we try to register and instantiate those devices while in the process of doing so for the parent controller and hence already holding the global spi_add_lock. Since we only care about concurrency within a single SPI bus move the lock to be per controller, avoiding the deadlock. This can be easily triggered in the case of spi-mux. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org> | 14 October 2021, 11:47:29 UTC |
d9b7748 | Hans Potsch | 06 October 2021, 12:13:32 UTC | EDAC/armada-xp: Fix output of uncorrectable error counter The number of correctable errors is displayed as uncorrectable errors because the "SBE" error count is passed to both calls of edac_mc_handle_error(). Pass the correct uncorrectable error count to the second edac_mc_handle_error() call when logging uncorrectable errors. [ bp: Massage commit message. ] Fixes: 7f6998a41257 ("ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC") Signed-off-by: Hans Potsch <hans.potsch@nokia.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20211006121332.58788-1-hans.potsch@nokia.com | 14 October 2021, 09:46:03 UTC |
be5eb93 | Adam Manzanares | 13 October 2021, 15:04:19 UTC | nvme: fix per-namespace chardev deletion Decrease reference count of chardevice during char device deletion in order to fix a memory leak. Add a release callabck for the device associated chardev and move ida_simple_remove into the release function. Fixes: 2637baed7801 ("nvme: introduce generic per-namespace chardev") Reported-by: Yi Zhang <yi.zhang@redhat.com> Suggested-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Adam Manzanares <a.manzanares@samsung.com> Reviewed-by: Javier González <javier@javigon.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> | 14 October 2021, 06:07:47 UTC |
776c750 | Wang Hai | 13 October 2021, 06:16:31 UTC | ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators() I got a null-ptr-deref report: KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] ... RIP: 0010:regulator_enable+0x84/0x260 ... Call Trace: ahci_platform_enable_regulators+0xae/0x320 ahci_platform_enable_resources+0x1a/0x120 ahci_probe+0x4f/0x1b9 platform_probe+0x10b/0x280 ... entry_SYSCALL_64_after_hwframe+0x44/0xae If devm_regulator_get() in ahci_platform_get_resources() fails, hpriv->phy_regulator will point to NULL, when enabling or disabling it, null-ptr-deref will occur. ahci_probe() ahci_platform_get_resources() devm_regulator_get(, "phy") // failed, let phy_regulator = NULL ahci_platform_enable_resources() ahci_platform_enable_regulators() regulator_enable(hpriv->phy_regulator) // null-ptr-deref commit 962399bb7fbf ("ata: libahci_platform: Fix regulator_get_optional() misuse") replaces devm_regulator_get_optional() with devm_regulator_get(), but PHY regulator omits to delete "hpriv->phy_regulator = NULL;" like AHCI. Delete it like AHCI regulator to fix this bug. Fixes: commit 962399bb7fbf ("ata: libahci_platform: Fix regulator_get_optional() misuse") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> | 14 October 2021, 03:22:47 UTC |
cbcc507 | Jakub Kicinski | 14 October 2021, 00:44:32 UTC | Merge branch 'fix-two-possible-memory-leak-problems-in-nfc-digital-module' Ziyang Xuan says: ==================== Fix two possible memory leak problems in NFC digital module. ==================== Link: https://lore.kernel.org/r/cover.1634111083.git.william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 14 October 2021, 00:44:32 UTC |
291c932 | Ziyang Xuan | 13 October 2021, 07:50:32 UTC | NFC: digital: fix possible memory leak in digital_in_send_sdd_req() 'skb' is allocated in digital_in_send_sdd_req(), but not free when digital_in_send_cmd() failed, which will cause memory leak. Fix it by freeing 'skb' if digital_in_send_cmd() return failed. Fixes: 2c66daecc409 ("NFC Digital: Add NFC-A technology support") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 14 October 2021, 00:44:29 UTC |
58e7dcc | Ziyang Xuan | 13 October 2021, 07:50:12 UTC | NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() 'params' is allocated in digital_tg_listen_mdaa(), but not free when digital_send_cmd() failed, which will cause memory leak. Fix it by freeing 'params' if digital_send_cmd() return failed. Fixes: 1c7a4c24fbfd ("NFC Digital: Add target NFC-DEP support") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 14 October 2021, 00:44:29 UTC |
0911ab3 | Ziyang Xuan | 13 October 2021, 03:49:32 UTC | nfc: fix error handling of nfc_proto_register() When nfc proto id is using, nfc_proto_register() return -EBUSY error code, but forgot to unregister proto. Fix it by adding proto_unregister() in the error handling case. Fixes: c7fe3b52c128 ("NFC: add NFC socket family") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211013034932.2833737-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 14 October 2021, 00:32:38 UTC |
1f922d9 | Vladimir Oltean | 13 October 2021, 00:19:09 UTC | Revert "net: procfs: add seq_puts() statement for dev_mcast" This reverts commit ec18e8455484370d633a718c6456ddbf6eceef21. It turns out that there are user space programs which got broken by that change. One example is the "ifstat" program shipped by Debian: https://packages.debian.org/source/bullseye/ifstat which, confusingly enough, seems to not have anything in common with the much more familiar (at least to me) ifstat program from iproute2: https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/tree/misc/ifstat.c root@debian:~# ifstat ifstat: /proc/net/dev: unsupported format. This change modified the header (first two lines of text) in /proc/net/dev so that it looks like this: root@debian:~# cat /proc/net/dev Interface| Receive | Transmit | bytes packets errs drop fifo frame compressed multicast| bytes packets errs drop fifo colls carrier compressed lo: 97400 1204 0 0 0 0 0 0 97400 1204 0 0 0 0 0 0 bond0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eno2: 5002206 6651 0 0 0 0 0 0 105518642 1465023 0 0 0 0 0 0 swp0: 134531 2448 0 0 0 0 0 0 99599598 1464381 0 0 0 0 0 0 swp1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 swp2: 4867675 4203 0 0 0 0 0 0 58134 631 0 0 0 0 0 0 sw0p0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw0p1: 124739 2448 0 1422 0 0 0 0 93741184 1464369 0 0 0 0 0 0 sw0p2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p0: 4850863 4203 0 0 0 0 0 0 54722 619 0 0 0 0 0 0 sw2p1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 br0: 10508 212 0 212 0 0 0 212 61369558 958857 0 0 0 0 0 0 whereas before it looked like this: root@debian:~# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 13160 164 0 0 0 0 0 0 13160 164 0 0 0 0 0 0 bond0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eno2: 30824 268 0 0 0 0 0 0 3332 37 0 0 0 0 0 0 swp0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 swp1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 swp2: 30824 268 0 0 0 0 0 0 2428 27 0 0 0 0 0 0 sw0p0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw0p1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw0p2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p0: 29752 268 0 0 0 0 0 0 1564 17 0 0 0 0 0 0 sw2p1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The reason why the ifstat shipped by Debian (v1.1, with a Debian patch upgrading it to 1.1-8.1 at the time of writing) is broken is because its "proc" driver/backend parses the header very literally: main/drivers.c#L825 if (!data->checked && strncmp(buf, "Inter-|", 7)) goto badproc; and there's no way in which the header can be changed such that programs parsing like that would not get broken. Even if we fix this ancient and very "lightly" maintained program to parse the text output of /proc/net/dev in a more sensible way, this story seems bound to repeat again with other programs, and modifying them all could cause more trouble than it's worth. On the other hand, the reverted patch had no other reason than an aesthetic one, so reverting it is the simplest way out. I don't know what other distributions would be affected; the fact that Debian doesn't ship the iproute2 version of the program (a different code base altogether, which uses netlink and not /proc/net/dev) is surprising in itself. Fixes: ec18e8455484 ("net: procfs: add seq_puts() statement for dev_mcast") Link: https://lore.kernel.org/netdev/20211009163511.vayjvtn3rrteglsu@skbuf/ Cc: Yajun Deng <yajun.deng@linux.dev> Cc: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20211013001909.3164185-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 14 October 2021, 00:24:38 UTC |
0282b0f | Steven Rostedt (VMware) | 13 October 2021, 20:51:13 UTC | selftests/ftrace: Update test for more eprobe removal process The removal of eprobes was broken and missed in testing. Add various ways to remove eprobes that are considered acceptable to the testing process to catch when/if they break again. Link: https://lkml.kernel.org/r/20211013205533.836644549@goodmis.org Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> | 13 October 2021, 23:27:53 UTC |
7d5fda1 | Steven Rostedt (VMware) | 13 October 2021, 20:51:12 UTC | tracing: Fix event probe removal from dynamic events When an event probe is to be removed via the API that created it via the dynamic events, an -ENOENT error is returned. This is because the removal of the event probe does not expect to see the event system and name that the event probe is attached to, even though that's part of the API to create it. As the removal of probes is to use the same API as they are created. In fact, the removal is not consistent with the kprobes and uprobes removal. Fix that by allowing various ways to remove the eprobe. The eprobe is created with: e:[GROUP/]NAME SYSTEM/EVENT [OPTIONS] Have it get removed by echoing in the following into dynamic_events: # Remove all eprobes with NAME echo '-:NAME' >> dynamic_events # Remove a specific eprobe echo '-:GROUP/NAME' >> dynamic_events echo '-:GROUP/NAME SYSTEM/EVENT' >> dynamic_events echo '-:NAME SYSTEM/EVENT' >> dynamic_events echo '-:GROUP/NAME SYSTEM/EVENT OPTIONS' >> dynamic_events echo '-:NAME SYSTEM/EVENT OPTIONS' >> dynamic_events Link: https://lkml.kernel.org/r/20211012081925.0e19cc4f@gandalf.local.home Link: https://lkml.kernel.org/r/20211013205533.630722129@goodmis.org Suggested-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> | 13 October 2021, 23:26:57 UTC |
f03dca0 | Nanyong Sun | 12 October 2021, 12:59:01 UTC | net: encx24j600: check error in devm_regmap_init_encx24j600 devm_regmap_init may return error which caused by like out of memory, this will results in null pointer dereference later when reading or writing register: general protection fault in encx24j600_spi_probe KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty #11 9c53a778c1306b1b02359f3c2bbedc0222cba652 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540 Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00 RSP: 0018:ffffc900010476b8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000 RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094 RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001 R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08 FS: 00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459 spi_probe drivers/spi/spi.c:397 really_probe drivers/base/dd.c:517 __driver_probe_device drivers/base/dd.c:751 driver_probe_device drivers/base/dd.c:782 __device_attach_driver drivers/base/dd.c:899 bus_for_each_drv drivers/base/bus.c:427 __device_attach drivers/base/dd.c:971 bus_probe_device drivers/base/bus.c:487 device_add drivers/base/core.c:3364 __spi_add_device drivers/spi/spi.c:599 spi_add_device drivers/spi/spi.c:641 spi_new_device drivers/spi/spi.c:717 new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e] dev_attr_store drivers/base/core.c:2074 sysfs_kf_write fs/sysfs/file.c:139 kernfs_fop_write_iter fs/kernfs/file.c:300 new_sync_write fs/read_write.c:508 (discriminator 4) vfs_write fs/read_write.c:594 ksys_write fs/read_write.c:648 do_syscall_64 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113 Add error check in devm_regmap_init_encx24j600 to avoid this situation. Fixes: 04fbfce7a222 ("net: Microchip encx24j600 driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Link: https://lore.kernel.org/r/20211012125901.3623144-1-sunnanyong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 22:25:25 UTC |
b70b152 | Jakub Kicinski | 13 October 2021, 20:39:54 UTC | Merge tag 'mlx5-fixes-2021-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-10-12 * tag 'mlx5-fixes-2021-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix division by 0 in mlx5e_select_queue for representors net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp net/mlx5e: Switchdev representors are not vlan challenged net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path net/mlx5e: Allow only complete TXQs partition in MQPRIO channel mode net/mlx5: Fix cleanup of bridge delayed work ==================== Link: https://lore.kernel.org/r/20211012205323.20123-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 20:39:55 UTC |
427f974 | Vegard Nossum | 12 October 2021, 15:25:09 UTC | net: korina: select CRC32 Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/korina.o: in function `korina_multicast_list': korina.c:(.text+0x1af): undefined reference to `crc32_le' Fixes: ef11291bcd5f9 ("Add support the Korina (IDT RC32434) Ethernet MAC") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Florian fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211012152509.21771-1-vegard.nossum@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 20:28:35 UTC |
0f0f80d | Arnd Bergmann | 10 October 2021, 17:27:03 UTC | iommu/arm: fix ARM_SMMU_QCOM compilation My previous bugfix ended up making things worse for the QCOM IOMMU driver when it forgot to add the Kconfig symbol that is getting used to control the compilation of the SMMU implementation specific code for Qualcomm. Fixes: 424953cf3c66 ("qcom_scm: hide Kconfig symbol") Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reported-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/lkml/20211010023350.978638-1-dmitry.baryshkov@linaro.org/ Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 13 October 2021, 19:28:44 UTC |
3536ac5 | Arnd Bergmann | 13 October 2021, 19:17:07 UTC | Merge tag 'optee-fix2-for-v5.15' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Fix missing devices unregister during optee_remove Unregisters OP-TEE client devices (UUIDs of some known Trusted Applications) from the TEE bus when the OP-TEE driver is unloaded. * tag 'optee-fix2-for-v5.15' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: Fix missing devices unregister during optee_remove Link: https://lore.kernel.org/r/20211013122854.GA1542549@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 13 October 2021, 19:17:10 UTC |
0470512 | Arnd Bergmann | 13 October 2021, 18:57:12 UTC | Merge tag 'arm-soc/for-5.15/devicetree' of https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.15, please pull the following: - Stefan fixes the VEC (video encoder) bus address for 2711, fixes the MDIO bus controller #address-cells/#size-cells inversion and the SDIO regulator voltage ranges - Nicolas fixes DTC warnings for the PCIe host bridge and its child USB device * tag 'arm-soc/for-5.15/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states ARM: dts: bcm2711: fix MDIO #address- and #size-cells ARM: dts: bcm283x: Fix VEC address for BCM2711 Link: https://lore.kernel.org/r/20211012213841.1872021-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 13 October 2021, 18:57:14 UTC |
92c02ff | Luca Weiss | 07 October 2021, 21:24:28 UTC | clk: qcom: add select QCOM_GDSC for SM6350 QCOM_GDSC is needed for the gcc driver to probe. Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20211007212444.328034-2-luca@z3ntu.xyz Signed-off-by: Stephen Boyd <sboyd@kernel.org> | 13 October 2021, 18:44:42 UTC |
e41bdd1 | Shawn Guo | 19 September 2021, 02:23:08 UTC | clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc It looks that the offset 0x7d060 is a copy & paste from above hlos1_vote_turing_mmu_tbu1_gdsc. Correct it to 0x7d07c as per downstream kernel. Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210919022308.24046-1-shawn.guo@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> | 13 October 2021, 17:43:39 UTC |
e599ee2 | Vegard Nossum | 12 October 2021, 09:34:46 UTC | net: arc: select CRC32 Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/arc/emac_main.o: in function `arc_emac_set_rx_mode': emac_main.c:(.text+0xb11): undefined reference to `crc32_le' The crc32_le() call comes through the ether_crc_le() call in arc_emac_set_rx_mode(). [v2: moved the select to ARC_EMAC_CORE; the Makefile is a bit confusing, but the error comes from emac_main.o, which is part of the arc_emac module, which in turn is enabled by CONFIG_ARC_EMAC_CORE. Note that arc_emac is different from emac_arc...] Fixes: 775dd682e2b0ec ("arc_emac: implement promiscuous mode and multicast filtering") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Link: https://lore.kernel.org/r/20211012093446.1575-1-vegard.nossum@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 16:00:10 UTC |
6b9b546 | Shengjiu Wang | 13 October 2021, 05:17:04 UTC | ASoC: wm8960: Fix clock configuration on slave mode There is a noise issue for 8kHz sample rate on slave mode. Compared with master mode, the difference is the DACDIV setting, after correcting the DACDIV, the noise is gone. There is no noise issue for 48kHz sample rate, because the default value of DACDIV is correct for 48kHz. So wm8960_configure_clocking() should be functional for ADC and DAC function even if it is slave mode. In order to be compatible for old use case, just add condition for checking that sysclk is zero with slave mode. Fixes: 0e50b51aa22f ("ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1634102224-3922-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> | 13 October 2021, 15:25:33 UTC |
348949d | Linus Torvalds | 13 October 2021, 14:42:07 UTC | Merge tag 'modules-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules fix from Jessica Yu: - Build fix for cfi_init() when CONFIG_MODULE_UNLOAD=n * tag 'modules-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: fix clang CFI with MODULE_UNLOAD=n | 13 October 2021, 14:42:07 UTC |
5d388fa | Stephen Boyd | 13 October 2021, 12:45:11 UTC | nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we subtract one from that making a large number that is then shifted more than the number of bits that fit into an unsigned long. UBSAN reports this problem: UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8 shift exponent 64 is too large for 64-bit type 'unsigned long' CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ #9 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x170 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 ubsan_epilogue+0x10/0x54 __ubsan_handle_shift_out_of_bounds+0x180/0x194 __nvmem_cell_read+0x1ec/0x21c nvmem_cell_read+0x58/0x94 nvmem_cell_read_variable_common+0x4c/0xb0 nvmem_cell_read_variable_le_u32+0x40/0x100 a6xx_gpu_init+0x170/0x2f4 adreno_bind+0x174/0x284 component_bind_all+0xf0/0x264 msm_drm_bind+0x1d8/0x7a0 try_to_bring_up_master+0x164/0x1ac __component_add+0xbc/0x13c component_add+0x20/0x2c dp_display_probe+0x340/0x384 platform_probe+0xc0/0x100 really_probe+0x110/0x304 __driver_probe_device+0xb8/0x120 driver_probe_device+0x4c/0xfc __device_attach_driver+0xb0/0x128 bus_for_each_drv+0x90/0xdc __device_attach+0xc8/0x174 device_initial_probe+0x20/0x2c bus_probe_device+0x40/0xa4 deferred_probe_work_func+0x7c/0xb8 process_one_work+0x128/0x21c process_scheduled_works+0x40/0x54 worker_thread+0x1ec/0x2a8 kthread+0x138/0x158 ret_from_fork+0x10/0x20 Fix it by making sure there are any bits to mask out. Fixes: 69aba7948cbe ("nvmem: Add a simple NVMEM framework for consumers") Cc: Douglas Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211013124511.18726-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 13 October 2021, 13:09:58 UTC |
bcef935 | Cindy Lu | 29 September 2021, 09:09:33 UTC | vhost-vdpa: Fix the wrong input in config_cb Fix the wrong input in for config_cb. In function vhost_vdpa_config_cb, the input cb.private was used as struct vhost_vdpa, so the input was wrong here, fix this issue Fixes: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Signed-off-by: Cindy Lu <lulu@redhat.com> Link: https://lore.kernel.org/r/20210929090933.20465-1-lulu@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 13 October 2021, 12:42:07 UTC |
09b6add | Randy Dunlap | 06 October 2021, 20:29:04 UTC | VDUSE: fix documentation underline warning Fix a VDUSE documentation build warning: Documentation/userspace-api/vduse.rst:21: WARNING: Title underline too short. Fixes: 7bc7f61897b6 ("Documentation: Add documentation for VDUSE") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Xie Yongji <xieyongji@bytedance.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/20211006202904.30241-1-rdunlap@infradead.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> | 13 October 2021, 12:42:07 UTC |
8b72164 | Heiko Carstens | 13 October 2021, 09:45:38 UTC | s390: add Alexander Gordeev as reviewer Alexander Gordeev will help reviewing s390 code. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> | 13 October 2021, 12:37:44 UTC |
ff63198 | Michael S. Tsirkin | 04 October 2021, 15:31:00 UTC | Revert "virtio-blk: Add validation for block size in config space" It turns out that access to config space before completing the feature negotiation is broken for big endian guests at least with QEMU hosts up to 6.1 inclusive. This affects any device that accesses config space in the validate callback: at the moment that is virtio-net with VIRTIO_NET_F_MTU but since 82e89ea077b9 ("virtio-blk: Add validation for block size in config space") that also started affecting virtio-blk with VIRTIO_BLK_F_BLK_SIZE. Further, unlike VIRTIO_NET_F_MTU which is off by default on QEMU, VIRTIO_BLK_F_BLK_SIZE is on by default, which resulted in lots of people not being able to boot VMs on BE. The spec is very clear that what we are doing is legal so QEMU needs to be fixed, but given it's been broken for so many years and no one noticed, we need to give QEMU a bit more time before applying this. Further, this patch is incomplete (does not check blk size is a power of two) and it duplicates the logic from nbd. Revert for now, and we'll reapply a cleaner logic in the next release. Cc: stable@vger.kernel.org Fixes: 82e89ea077b9 ("virtio-blk: Add validation for block size in config space") Cc: Xie Yongji <xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 13 October 2021, 12:35:36 UTC |
97f854b | Wu Zongyong | 15 September 2021, 06:39:32 UTC | vhost_vdpa: unset vq irq before freeing irq Currently we unset vq irq after freeing irq and that will result in error messages: pi_update_irte: failed to update PI IRTE irq bypass consumer (token 000000005a07a12b) unregistration fails: -22 This patch solves this. Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Link: https://lore.kernel.org/r/02637d38dcf4e4b836c5b3a65055fe92bf812b3b.1631687872.git.wuzongyong@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> | 13 October 2021, 12:35:36 UTC |
2f9a174 | Halil Pasic | 11 October 2021, 05:39:21 UTC | virtio: write back F_VERSION_1 before validate The virtio specification virtio-v1.1-cs01 states: "Transitional devices MUST detect Legacy drivers by detecting that VIRTIO_F_VERSION_1 has not been acknowledged by the driver." This is exactly what QEMU as of 6.1 has done relying solely on VIRTIO_F_VERSION_1 for detecting that. However, the specification also says: "... the driver MAY read (but MUST NOT write) the device-specific configuration fields to check that it can support the device ..." before setting FEATURES_OK. In that case, any transitional device relying solely on VIRTIO_F_VERSION_1 for detecting legacy drivers will return data in legacy format. In particular, this implies that it is in big endian format for big endian guests. This naturally confuses the driver which expects little endian in the modern mode. It is probably a good idea to amend the spec to clarify that VIRTIO_F_VERSION_1 can only be relied on after the feature negotiation is complete. Before validate callback existed, config space was only read after FEATURES_OK. However, we already have two regressions, so let's address this here as well. The regressions affect the VIRTIO_NET_F_MTU feature of virtio-net and the VIRTIO_BLK_F_BLK_SIZE feature of virtio-blk for BE guests when virtio 1.0 is used on both sides. The latter renders virtio-blk unusable with DASD backing, because things simply don't work with the default. See Fixes tags for relevant commits. For QEMU, we can work around the issue by writing out the feature bits with VIRTIO_F_VERSION_1 bit set. We (ab)use the finalize_features config op for this. This isn't enough to address all vhost devices since these do not get the features until FEATURES_OK, however it looks like the affected devices actually never handled the endianness for legacy mode correctly, so at least that's not a regression. No devices except virtio net and virtio blk seem to be affected. Long term the right thing to do is to fix the hypervisors. Cc: <stable@vger.kernel.org> #v4.11 Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Fixes: 82e89ea077b9 ("virtio-blk: Add validation for block size in config space") Fixes: fe36cbe0671e ("virtio_net: clear MTU when out of range") Reported-by: markver@us.ibm.com Reviewed-by: Cornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/r/20211011053921.1198936-1-pasic@linux.ibm.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 13 October 2021, 12:35:36 UTC |
c2115b2 | Miquel Raynal | 05 October 2021, 22:16:31 UTC | usb: musb: dsps: Fix the probe error path Commit 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb") has inverted the calls to dsps_setup_optional_vbus_irq() and dsps_create_musb_pdev() without updating correctly the error path. dsps_create_musb_pdev() allocates and registers a new platform device which must be unregistered and freed with platform_device_unregister(), and this is missing upon dsps_setup_optional_vbus_irq() error. While on the master branch it seems not to trigger any issue, I observed a kernel crash because of a NULL pointer dereference with a v5.10.70 stable kernel where the patch mentioned above was backported. With this kernel version, -EPROBE_DEFER is returned the first time dsps_setup_optional_vbus_irq() is called which triggers the probe to error out without unregistering the platform device. Unfortunately, on the Beagle Bone Black Wireless, the platform device still living in the system is being used by the USB Ethernet gadget driver, which during the boot phase triggers the crash. My limited knowledge of the musb world prevents me to revert this commit which was sent to silence a robot warning which, as far as I understand, does not make sense. The goal of this patch was to prevent an IRQ to fire before the platform device being registered. I think this cannot ever happen due to the fact that enabling the interrupts is done by the ->enable() callback of the platform musb device, and this platform device must be already registered in order for the core or any other user to use this callback. Hence, I decided to fix the error path, which might prevent future errors on mainline kernels while also fixing older ones. Fixes: 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20211005221631.1529448-1-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 13 October 2021, 12:12:49 UTC |
82a59c7 | Zenghui Yu | 06 September 2021, 03:35:41 UTC | drm/i915: Free the returned object of acpi_evaluate_dsm() As per the comment on top of acpi_evaluate_dsm(): | * Evaluate device's _DSM method with specified GUID, revision id and | * function number. Caller needs to free the returned object. We should free the returned object of acpi_evaluate_dsm() to avoid memory leakage. Otherwise the kmemleak splat will be triggered at boot time (if we compile kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE=y). Fixes: 8e55f99c510f ("drm/i915: Invoke another _DSM to enable MUX on HP Workstation laptops") Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210906033541.862-1-yuzenghui@huawei.com (cherry picked from commit 149ac2e7ae1845191bd18b66a725392ac83a0c47) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 13 October 2021, 10:41:16 UTC |
af628cd | Matthew Brost | 01 October 2021, 15:58:25 UTC | drm/i915: Fix bug in user proto-context creation that leaked contexts Set number of engines before attempting to create contexts so the function free_engines can clean up properly. Also check return of alloc_engines for NULL. v2: (Tvrtko) - Send as stand alone patch (John Harrison) - Check for alloc_engines returning NULL v3: (Checkpatch / Tvrtko) - Remove braces around single line if statement Cc: Jason Ekstrand <jason@jlekstrand.net> Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)") Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211001155825.6762-1-matthew.brost@intel.com (cherry picked from commit 84edf53776343d6b5bf5fa59a6f600a22ca23c40) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 13 October 2021, 10:41:16 UTC |
6d7163f | Alexander Usyskin | 13 October 2021, 07:45:52 UTC | mei: hbm: drop hbm responses on early shutdown Drop HBM responses also in the early shutdown phase where the usual traffic is allowed. Extend the rule that drop HBM responses received during the shutdown phase by also in MEI_DEV_POWERING_DOWN state. This resolves the stall if the driver is stopping in the middle of the link init or link reset. Fixes: da3eb47c90d4 ("mei: hbm: drop hbm responses on shutdown") Fixes: 36edb1407c3c ("mei: allow clients on bus to communicate in remove callback") Cc: <stable@vger.kernel.org> # v5.12+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20211013074552.2278419-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 13 October 2021, 09:02:05 UTC |
6f779e1 | Cédric Le Goater | 11 October 2021, 07:02:03 UTC | powerpc/xive: Discard disabled interrupts in get_irqchip_state() When an interrupt is passed through, the KVM XIVE device calls the set_vcpu_affinity() handler which raises the P bit to mask the interrupt and to catch any in-flight interrupts while routing the interrupt to the guest. On the guest side, drivers (like some Intels) can request at probe time some MSIs and call synchronize_irq() to check that there are no in flight interrupts. This will call the XIVE get_irqchip_state() handler which will always return true as the interrupt P bit has been set on the host side and lock the CPU in an infinite loop. Fix that by discarding disabled interrupts in get_irqchip_state(). Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race") Cc: stable@vger.kernel.org #v5.4+ Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: seeteena <s1seetee@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211011070203.99726-1-clg@kaod.org | 13 October 2021, 05:38:55 UTC |
6e44bd6 | Mike Rapoport | 13 October 2021, 05:36:59 UTC | memblock: exclude NOMAP regions from kmemleak Vladimir Zapolskiy reports: commit a7259df76702 ("memblock: make memblock_find_in_range method private") invokes a kernel panic while running kmemleak on OF platforms with nomaped regions: Unable to handle kernel paging request at virtual address fff000021e00000 [...] scan_block+0x64/0x170 scan_gray_list+0xe8/0x17c kmemleak_scan+0x270/0x514 kmemleak_write+0x34c/0x4ac Indeed, NOMAP regions don't have linear map entries so an attempt to scan these areas would fault. Prevent such faults by excluding NOMAP regions from kmemleak. Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> | 13 October 2021, 05:36:59 UTC |
2b94b6b | Wang Hai | 12 October 2021, 07:15:56 UTC | PCI/MSI: Handle msi_populate_sysfs() errors correctly Previously, when msi_populate_sysfs() failed, we saved the error return value as dev->msi_irq_groups, which leads to a page fault when free_msi_irqs() calls msi_destroy_sysfs(). To prevent this, leave dev->msi_irq_groups alone when msi_populate_sysfs() fails. Found by the Hulk Robot when injecting a memory allocation fault in msi_populate_sysfs(): BUG: unable to handle page fault for address: fffffffffffffff4 ... Call Trace: msi_destroy_sysfs+0x30/0xa0 free_msi_irqs+0x11d/0x1b0 Fixes: 2f170814bdd2 ("genirq/msi: Move MSI sysfs handling from PCI to MSI core") Link: https://lore.kernel.org/r/20211012071556.939137-1-wanghai38@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Barry Song <song.bao.hua@hisilicon.com> | 13 October 2021, 01:32:58 UTC |
847c6bd | Jakub Kicinski | 13 October 2021, 00:35:21 UTC | Merge branch 'felix-dsa-driver-fixes' Vladimir Oltean says: ==================== Felix DSA driver fixes This is an assorted collection of fixes for issues seen on the NXP LS1028A switch. - PTP packet drops due to switch congestion result in catastrophic damage to the driver's state - loops are not blocked by STP if using the ocelot-8021q tagger - driver uses the wrong CPU port when two of them are defined in DT - module autoloading is broken* with both tagging protocol drivers (ocelot and ocelot-8021q) Changes in v2: - Stop printing that we aren't going to take TX timestamps if we don't have TX timestamping anyway, and we are just carrying PTP frames for a cascaded DSA switch. - Shorten the deferred xmit kthread name so that it fits the 16 character limit (TASK_COMM_LEN) ==================== Link: https://lore.kernel.org/r/20211012114044.2526146-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:35:22 UTC |
8d5f795 | Vladimir Oltean | 12 October 2021, 11:40:44 UTC | net: dsa: felix: break at first CPU port during init and teardown The NXP LS1028A switch has two Ethernet ports towards the CPU, but only one of them is capable of acting as an NPI port at a time (inject and extract packets using DSA tags). However, using the alternative ocelot-8021q tagging protocol, it should be possible to use both CPU ports symmetrically, but for that we need to mark both ports in the device tree as DSA masters. In the process of doing that, it can be seen that traffic to/from the network stack gets broken, and this is because the Felix driver iterates through all DSA CPU ports and configures them as NPI ports. But since there can only be a single NPI port, we effectively end up in a situation where DSA thinks the default CPU port is the first one, but the hardware port configured to be an NPI is the last one. I would like to treat this as a bug, because if the updated device trees are going to start circulating, it would be really good for existing kernels to support them, too. Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:35:19 UTC |
43ba33b | Vladimir Oltean | 12 October 2021, 11:40:43 UTC | net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports When setting up a bridge with stp_state 1, topology changes are not detected and loops are not blocked. This is because the standard way of transmitting a packet, based on VLAN IDs redirected by VCAP IS2 to the right egress port, does not override the port STP state (in the case of Ocelot switches, that's really the PGID_SRC masks). To force a packet to be injected into a port that's BLOCKING, we must send it as a control packet, which means in the case of this tagger to send it using the manual register injection method. We already do this for PTP frames, extend the logic to apply to any link-local MAC DA. Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:35:19 UTC |
1328a88 | Vladimir Oltean | 12 October 2021, 11:40:42 UTC | net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent At present, when a PTP packet which requires TX timestamping gets dropped under congestion by the switch, things go downhill very fast. The driver keeps a clone of that skb in a queue of packets awaiting TX timestamp interrupts, but interrupts will never be raised for the dropped packets. Moreover, matching timestamped packets to timestamps is done by a 2-bit timestamp ID, and this can wrap around and we can match on the wrong skb. Since with the default NPI-based tagging protocol, we get no notification about packet drops, the best we can do is eventually recover from the drop of a PTP frame: its skb will be dead memory until another skb which was assigned the same timestamp ID happens to find it. However, with the ocelot-8021q tagger which injects packets using the manual register interface, it appears that we can check for more information, such as: - whether the input queue has reached the high watermark or not - whether the injection group's FIFO can accept additional data or not so we know that a PTP frame is likely to get dropped before actually sending it, and drop it ourselves (because DSA uses NETIF_F_LLTX, so it can't return NETDEV_TX_BUSY to ask the qdisc to requeue the packet). But when we do that, we can also remove the skb from the timestamping queue, because there surely won't be any timestamp that matches it. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:35:18 UTC |
49f885b | Vladimir Oltean | 12 October 2021, 11:40:41 UTC | net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib Michael reported that when using the "ocelot-8021q" tagging protocol, the switch driver module must be manually loaded before the tagging protocol can be loaded/is available. This appears to be the same problem described here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ where due to the fact that DSA tagging protocols make use of symbols exported by the switch drivers, circular dependencies appear and this breaks module autoloading. The ocelot_8021q driver needs the ocelot_can_inject() and ocelot_port_inject_frame() functions from the switch library. Previously the wrong approach was taken to solve that dependency: shims were provided for the case where the ocelot switch library was compiled out, but that turns out to be insufficient, because the dependency when the switch lib _is_ compiled is problematic too. We cannot declare ocelot_can_inject() and ocelot_port_inject_frame() as static inline functions, because these access I/O functions like __ocelot_write_ix() which is called by ocelot_write_rix(). Making those static inline basically means exposing the whole guts of the ocelot switch library, not ideal... We already have one tagging protocol driver which calls into the switch driver during xmit but not using any exported symbol: sja1105_defer_xmit. We can do the same thing here: create a kthread worker and one work item per skb, and let the switch driver itself do the register accesses to send the skb, and then consume it. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:35:18 UTC |
deab6b1 | Vladimir Oltean | 12 October 2021, 11:40:40 UTC | net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver As explained here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ DSA tagging protocol drivers cannot depend on symbols exported by switch drivers, because this creates a circular dependency that breaks module autoloading. The tag_ocelot.c file depends on the ocelot_ptp_rew_op() function exported by the common ocelot switch lib. This function looks at OCELOT_SKB_CB(skb) and computes how to populate the REW_OP field of the DSA tag, for PTP timestamping (the command: one-step/two-step, and the TX timestamp identifier). None of that requires deep insight into the driver, it is quite stateless, as it only depends upon the skb->cb. So let's make it a static inline function and put it in include/linux/dsa/ocelot.h, a file that despite its name is used by the ocelot switch driver for populating the injection header too - since commit 40d3f295b5fe ("net: mscc: ocelot: use common tag parsing code with DSA"). With that function declared as static inline, its body is expanded inside each call site, so the dependency is broken and the DSA tagger can be built without the switch library, upon which the felix driver depends. Fixes: 39e5308b3250 ("net: mscc: ocelot: support PTP Sync one-step timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:35:18 UTC |
ebb4c6a | Vladimir Oltean | 12 October 2021, 11:40:39 UTC | net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header The sad reality is that when a PTP frame with a TX timestamping request is transmitted, it isn't guaranteed that it will make it all the way to the wire (due to congestion inside the switch), and that a timestamp will be taken by the hardware and placed in the timestamp FIFO where an IRQ will be raised for it. The implication is that if enough PTP frames are silently dropped by the hardware such that the timestamp ID has rolled over, it is possible to match a timestamp to an old skb. Furthermore, nobody will match on the real skb corresponding to this timestamp, since we stupidly matched on a previous one that was stale in the queue, and stopped there. So PTP timestamping will be broken and there will be no way to recover. It looks like the hardware parses the sequenceID from the PTP header, and also provides that metadata for each timestamp. The driver currently ignores this, but it shouldn't. As an extra resiliency measure, do the following: - check whether the PTP sequenceID also matches between the skb and the timestamp, treat the skb as stale otherwise and free it - if we see a stale skb, don't stop there and try to match an skb one more time, chances are there's one more skb in the queue with the same timestamp ID, otherwise we wouldn't have ever found the stale one (it is by timestamp ID that we matched it). While this does not prevent PTP packet drops, it at least prevents the catastrophic consequences of incorrect timestamp matching. Since we already call ptp_classify_raw in the TX path, save the result in the skb->cb of the clone, and just use that result in the interrupt code path. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:35:18 UTC |
fba0128 | Vladimir Oltean | 12 October 2021, 11:40:38 UTC | net: mscc: ocelot: deny TX timestamping of non-PTP packets It appears that Ocelot switches cannot timestamp non-PTP frames, I tested this using the isochron program at: https://github.com/vladimiroltean/tsn-scripts with the result that the driver increments the ocelot_port->ts_id counter as expected, puts it in the REW_OP, but the hardware seems to not timestamp these packets at all, since no IRQ is emitted. Therefore check whether we are sending PTP frames, and refuse to populate REW_OP otherwise. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:35:18 UTC |
9fde506 | Vladimir Oltean | 12 October 2021, 11:40:37 UTC | net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb When skb_match is NULL, it means we received a PTP IRQ for a timestamp ID that the kernel has no idea about, since there is no skb in the timestamping queue with that timestamp ID. This is a grave error and not something to just "continue" over. So print a big warning in case this happens. Also, move the check above ocelot_get_hwtimestamp(), there is no point in reading the full 64-bit current PTP time if we're not going to do anything with it anyway for this skb. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:35:18 UTC |
52849bc | Vladimir Oltean | 12 October 2021, 11:40:36 UTC | net: mscc: ocelot: avoid overflowing the PTP timestamp FIFO PTP packets with 2-step TX timestamp requests are matched to packets based on the egress port number and a 6-bit timestamp identifier. All PTP timestamps are held in a common FIFO that is 128 entry deep. This patch ensures that back-to-back timestamping requests cannot exceed the hardware FIFO capacity. If that happens, simply send the packets without requesting a TX timestamp to be taken (in the case of felix, since the DSA API has a void return code in ds->ops->port_txtstamp) or drop them (in the case of ocelot). I've moved the ts_id_lock from a per-port basis to a per-switch basis, because we need separate accounting for both numbers of PTP frames in flight. And since we need locking to inc/dec the per-switch counter, that also offers protection for the per-port counter and hence there is no reason to have a per-port counter anymore. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:35:17 UTC |
c57fe00 | Vladimir Oltean | 12 October 2021, 11:40:35 UTC | net: mscc: ocelot: make use of all 63 PTP timestamp identifiers At present, there is a problem when user space bombards a port with PTP event frames which have TX timestamping requests (or when a tc-taprio offload is installed on a port, which delays the TX timestamps by a significant amount of time). The driver will happily roll over the 2-bit timestamp ID and this will cause incorrect matches between an skb and the TX timestamp collected from the FIFO. The Ocelot switches have a 6-bit PTP timestamp identifier, and the value 63 is reserved, so that leaves identifiers 0-62 to be used. The timestamp identifiers are selected by the REW_OP packet field, and are actually shared between CPU-injected frames and frames which match a VCAP IS2 rule that modifies the REW_OP. The hardware supports partitioning between the two uses of the REW_OP field through the PTP_ID_LOW and PTP_ID_HIGH registers, and by default reserves the PTP IDs 0-3 for CPU-injected traffic and the rest for VCAP IS2. The driver does not use VCAP IS2 to set REW_OP for 2-step timestamping, and it also writes 0xffffffff to both PTP_ID_HIGH and PTP_ID_LOW in ocelot_init_timestamp() which makes all timestamp identifiers available to CPU injection. Therefore, we can make use of all 63 timestamp identifiers, which should allow more timestampable packets to be in flight on each port. This is only part of the solution, more issues will be addressed in future changes. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:35:17 UTC |
3af760e | Jakub Kicinski | 13 October 2021, 00:33:39 UTC | Merge branch 'fix-circular-dependency-between-sja1105-and-tag_sja1105' Vladimir Oltean says: ==================== Fix circular dependency between sja1105 and tag_sja1105 As discussed here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ DSA tagging protocols cannot use symbols exported by switch drivers. Eliminate the two instances of that from tag_sja1105, and that allows us to have a working setup with modules again. ==================== Re-applying to net, this was mistakenly applied to net-next, see first Link. Link: https://lore.kernel.org/r/20211012114044.2526146-1-vladimir.oltean@nxp.com/ Link: https://lore.kernel.org/r/20210922143726.2431036-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:33:59 UTC |
4ac0567 | Vladimir Oltean | 22 September 2021, 14:37:26 UTC | net: dsa: sja1105: break dependency between dsa_port_is_sja1105 and switch driver It's nice to be able to test a tagging protocol with dsa_loop, but not at the cost of losing the ability of building the tagging protocol and switch driver as modules, because as things stand, there is a circular dependency between the two. Tagging protocol drivers cannot depend on switch drivers, that is a hard fact. The reasoning behind the blamed patch was that accessing dp->priv should first make sure that the structure behind that pointer is what we really think it is. Currently the "sja1105" and "sja1110" tagging protocols only operate with the sja1105 switch driver, just like any other tagging protocol and switch combination. The only way to mix and match them is by modifying the code, and this applies to dsa_loop as well (by default that uses DSA_TAG_PROTO_NONE). So while in principle there is an issue, in practice there isn't one. Until we extend dsa_loop to allow user space configuration, treat the problem as a non-issue and just say that DSA ports found by tag_sja1105 are always sja1105 ports, which is in fact true. But keep the dsa_port_is_sja1105 function so that it's easy to patch it during testing, and rely on dead code elimination. Fixes: 994d2cbb08ca ("net: dsa: tag_sja1105: be dsa_loop-safe") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:33:36 UTC |
28da055 | Vladimir Oltean | 22 September 2021, 14:37:25 UTC | net: dsa: move sja1110_process_meta_tstamp inside the tagging protocol driver The problem is that DSA tagging protocols really must not depend on the switch driver, because this creates a circular dependency at insmod time, and the switch driver will effectively not load when the tagging protocol driver is missing. The code was structured in the way it was for a reason, though. The DSA driver-facing API for PTP timestamping relies on the assumption that two-step TX timestamps are provided by the hardware in an out-of-band manner, typically by raising an interrupt and making that timestamp available inside some sort of FIFO which is to be accessed over SPI/MDIO/etc. So the API puts .port_txtstamp into dsa_switch_ops, because it is expected that the switch driver needs to save some state (like put the skb into a queue until its TX timestamp arrives). On SJA1110, TX timestamps are provided by the switch as Ethernet packets, so this makes them be received and processed by the tagging protocol driver. This in itself is great, because the timestamps are full 64-bit and do not require reconstruction, and since Ethernet is the fastest I/O method available to/from the switch, PTP timestamps arrive very quickly, no matter how bottlenecked the SPI connection is, because SPI interaction is not needed at all. DSA's code structure and strict isolation between the tagging protocol driver and the switch driver break the natural code organization. When the tagging protocol driver receives a packet which is classified as a metadata packet containing timestamps, it passes those timestamps one by one to the switch driver, which then proceeds to compare them based on the recorded timestamp ID that was generated in .port_txtstamp. The communication between the tagging protocol and the switch driver is done through a method exported by the switch driver, sja1110_process_meta_tstamp. To satisfy build requirements, we force a dependency to build the tagging protocol driver as a module when the switch driver is a module. However, as explained in the first paragraph, that causes the circular dependency. To solve this, move the skb queue from struct sja1105_private :: struct sja1105_ptp_data to struct sja1105_private :: struct sja1105_tagger_data. The latter is a data structure for which hacks have already been put into place to be able to create persistent storage per switch that is accessible from the tagging protocol driver (see sja1105_setup_ports). With the skb queue directly accessible from the tagging protocol driver, we can now move sja1110_process_meta_tstamp into the tagging driver itself, and avoid exporting a symbol. Fixes: 566b18c8b752 ("net: dsa: sja1105: implement TX timestamping for SJA1110") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 13 October 2021, 00:33:36 UTC |
43a4b4d | Alvin Šipraga | 12 October 2021, 11:27:31 UTC | net: dsa: fix spurious error message when unoffloaded port leaves bridge Flip the sign of a return value check, thereby suppressing the following spurious error: port 2 failed to notify DSA_NOTIFIER_BRIDGE_LEAVE: -EOPNOTSUPP ... which is emitted when removing an unoffloaded DSA switch port from a bridge. Fixes: d371b7c92d19 ("net: dsa: Unset vlan_filtering when ports leave the bridge") Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211012112730.3429157-1-alvin@pqrs.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 12 October 2021, 23:11:23 UTC |
60d950f | Baowen Zheng | 12 October 2021, 12:48:50 UTC | nfp: flow_offload: move flow_indr_dev_register from app init to app start In commit 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation"), it adds a process to trigger the callback to setup the bo callback when the driver regists a callback. In our current implement, we are not ready to run the callback when nfp call the function flow_indr_dev_register, then there will be error message as: kernel: Oops: 0000 [#1] SMP PTI kernel: CPU: 0 PID: 14119 Comm: kworker/0:0 Tainted: G kernel: Workqueue: events work_for_cpu_fn kernel: RIP: 0010:nfp_flower_indr_setup_tc_cb+0x258/0x410 kernel: RSP: 0018:ffffbc1e02c57bf8 EFLAGS: 00010286 kernel: RAX: 0000000000000000 RBX: ffff9c761fabc000 RCX: 0000000000000001 kernel: RDX: 0000000000000001 RSI: fffffffffffffff0 RDI: ffffffffc0be9ef1 kernel: RBP: ffffbc1e02c57c58 R08: ffffffffc08f33aa R09: ffff9c6db7478800 kernel: R10: 0000009c003f6e00 R11: ffffbc1e02800000 R12: ffffbc1e000d9000 kernel: R13: ffffbc1e000db428 R14: ffff9c6db7478800 R15: ffff9c761e884e80 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: fffffffffffffff0 CR3: 00000009e260a004 CR4: 00000000007706f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: PKRU: 55555554 kernel: Call Trace: kernel: ? flow_indr_dev_register+0xab/0x210 kernel: ? __cond_resched+0x15/0x30 kernel: ? kmem_cache_alloc_trace+0x44/0x4b0 kernel: ? nfp_flower_setup_tc+0x1d0/0x1d0 [nfp] kernel: flow_indr_dev_register+0x158/0x210 kernel: ? tcf_block_unbind+0xe0/0xe0 kernel: nfp_flower_init+0x40b/0x650 [nfp] kernel: nfp_net_pci_probe+0x25f/0x960 [nfp] kernel: ? nfp_rtsym_read_le+0x76/0x130 [nfp] kernel: nfp_pci_probe+0x6a9/0x820 [nfp] kernel: local_pci_probe+0x45/0x80 So we need to call flow_indr_dev_register in app start process instead of init stage. Fixes: 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation") Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20211012124850.13025-1-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 12 October 2021, 23:07:52 UTC |
0dee6f7 | Laurent Pinchart | 21 August 2021, 23:44:27 UTC | drm: rcar-du: Don't create encoder for unconnected LVDS outputs On R-Car D3 and E3, the LVDS encoders provide the pixel clock to the DU, even when LVDS outputs are not used. For this reason, the rcar-lvds driver probes successfully on those platforms even if no further bridge or panel is connected to the LVDS output, in order to provide the rcar_lvds_clk_enable() and rcar_lvds_clk_disable() functions to the DU driver. If an LVDS output isn't connected, trying to create a DRM connector for the output will fail. Fix this by skipping connector creation in that case, and also skip creation of the DRM encoder as there's no point in an encoder without a connector. Fixes: e9e056949c92 ("drm: rcar-du: lvds: Convert to DRM panel bridge helper") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> (cherry picked from commit 187502afe87a0fc96832056558978fa423920ee0) Signed-off-by: Dave Airlie <airlied@redhat.com> | 12 October 2021, 21:44:04 UTC |
84c8a87 | Maxim Mikityanskiy | 11 October 2021, 15:39:35 UTC | net/mlx5e: Fix division by 0 in mlx5e_select_queue for representors Commit 846d6da1fcdb ("net/mlx5e: Fix division by 0 in mlx5e_select_queue") makes mlx5e_build_nic_params assign a non-zero initial value to priv->num_tc_x_num_ch, so that mlx5e_select_queue doesn't fail with division by 0 if called before the first activation of channels. However, the initialization flow of representors doesn't call mlx5e_build_nic_params, so this bug can still happen with representors. This commit fixes the bug by adding the missing assignment to mlx5e_build_rep_params. Fixes: 846d6da1fcdb ("net/mlx5e: Fix division by 0 in mlx5e_select_queue") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 12 October 2021, 20:52:03 UTC |
0bc73ad | Aya Levin | 26 September 2021, 14:55:41 UTC | net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp Due to current HW arch limitations, RX-FCS (scattering FCS frame field to software) and RX-port-timestamp (improved timestamp accuracy on the receive side) can't work together. RX-port-timestamp is not controlled by the user and it is enabled by default when supported by the HW/FW. This patch sets RX-port-timestamp opposite to RX-FCS configuration. Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 12 October 2021, 20:51:59 UTC |
b2107cd | Saeed Mahameed | 05 October 2021, 04:20:25 UTC | net/mlx5e: Switchdev representors are not vlan challenged Before this patch, mlx5 representors advertised the NETIF_F_VLAN_CHALLENGED bit, this could lead to missing features when using reps with vxlan/bridge and maybe other virtual interfaces, when such interfaces inherit this bit and block vlan usage in their topology. Example: $ip link add dev bridge type bridge # add representor interface to the bridge $ip link set dev pf0hpf master $ip link add link bridge name vlan10 type vlan id 10 protocol 802.1q Error: 8021q: VLANs not supported on device. Reps are perfectly capable of handling vlan traffic, although they don't implement vlan_{add,kill}_vid ndos, hence, remove NETIF_F_VLAN_CHALLENGED advertisement. Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Reported-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> | 12 October 2021, 20:51:56 UTC |
94b960b | Valentine Fatiev | 15 August 2021, 14:43:19 UTC | net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path Prior to this patch in case mlx5_core_destroy_cq() failed it returns without completing all destroy operations and that leads to memory leak. Instead, complete the destroy flow before return error. Also move mlx5_debug_cq_remove() to the beginning of mlx5_core_destroy_cq() to be symmetrical with mlx5_core_create_cq(). kmemleak complains on: unreferenced object 0xc000000038625100 (size 64): comm "ethtool", pid 28301, jiffies 4298062946 (age 785.380s) hex dump (first 32 bytes): 60 01 48 94 00 00 00 c0 b8 05 34 c3 00 00 00 c0 `.H.......4..... 02 00 00 00 00 00 00 00 00 db 7d c1 00 00 00 c0 ..........}..... backtrace: [<000000009e8643cb>] add_res_tree+0xd0/0x270 [mlx5_core] [<00000000e7cb8e6c>] mlx5_debug_cq_add+0x5c/0xc0 [mlx5_core] [<000000002a12918f>] mlx5_core_create_cq+0x1d0/0x2d0 [mlx5_core] [<00000000cef0a696>] mlx5e_create_cq+0x210/0x3f0 [mlx5_core] [<000000009c642c26>] mlx5e_open_cq+0xb4/0x130 [mlx5_core] [<0000000058dfa578>] mlx5e_ptp_open+0x7f4/0xe10 [mlx5_core] [<0000000081839561>] mlx5e_open_channels+0x9cc/0x13e0 [mlx5_core] [<0000000009cf05d4>] mlx5e_switch_priv_channels+0xa4/0x230 [mlx5_core] [<0000000042bbedd8>] mlx5e_safe_switch_params+0x14c/0x300 [mlx5_core] [<0000000004bc9db8>] set_pflag_tx_port_ts+0x9c/0x160 [mlx5_core] [<00000000a0553443>] mlx5e_set_priv_flags+0xd0/0x1b0 [mlx5_core] [<00000000a8f3d84b>] ethnl_set_privflags+0x234/0x2d0 [<00000000fd27f27c>] genl_family_rcv_msg_doit+0x108/0x1d0 [<00000000f495e2bb>] genl_family_rcv_msg+0xe4/0x1f0 [<00000000646c5c2c>] genl_rcv_msg+0x78/0x120 [<00000000d53e384e>] netlink_rcv_skb+0x74/0x1a0 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Valentine Fatiev <valentinef@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 12 October 2021, 20:51:52 UTC |
ca20dfd | Tariq Toukan | 04 October 2021, 12:04:25 UTC | net/mlx5e: Allow only complete TXQs partition in MQPRIO channel mode Do not allow configurations of MQPRIO channel mode that do not fully define and utilize the channels txqs. Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 12 October 2021, 20:51:48 UTC |
2266bb1 | Shay Drory | 13 September 2021, 12:48:11 UTC | net/mlx5: Fix cleanup of bridge delayed work Currently, bridge cleanup is calling to cancel_delayed_work(). When this function is finished, there is a chance that the delayed work is still running. Also, the delayed work is queueing itself. As a result, we might execute the delayed work after the bridge cleanup have finished and hit a null-ptr oops[1]. Fix it by using cancel_delayed_work_sync(), which is waiting until the work is done and will cancel the queue work. [1] [ 8202.143043 ] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 8202.144438 ] #PF: supervisor write access in kernel mode [ 8202.145476 ] #PF: error_code(0x0002) - not-present page [ 8202.146520 ] PGD 0 P4D 0 [ 8202.147126 ] Oops: 0002 [#1] SMP NOPTI [ 8202.147899 ] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.14.0-rc6_for_upstream_min_debug_2021_08_25_16_06 #1 [ 8202.149741 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 8202.151908 ] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 8202.156234 ] RSP: 0018:ffff88846f885ea0 EFLAGS: 00010046 [ 8202.157289 ] RAX: 0000000000000000 RBX: ffff88846f880000 RCX: 0000000000000000 [ 8202.158731 ] RDX: 0000000000000001 RSI: ffff8881004000c8 RDI: 0000000000000000 [ 8202.160177 ] RBP: ffff8881fe684978 R08: ffff888100140000 R09: ffffffff824455b8 [ 8202.161569 ] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 8202.163004 ] R13: 0000000000000012 R14: 0000000000000200 R15: ffff88812992d000 [ 8202.164018 ] FS: 0000000000000000(0000) GS:ffff88846f880000(0000) knlGS:0000000000000000 [ 8202.164960 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8202.165634 ] CR2: 0000000000000000 CR3: 0000000108cac004 CR4: 0000000000370ea0 [ 8202.166450 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8202.167807 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8202.168852 ] Call Trace: [ 8202.169421 ] <IRQ> [ 8202.169792 ] __queue_work+0xf2/0x3d0 [ 8202.170481 ] ? queue_work_node+0x40/0x40 [ 8202.171270 ] call_timer_fn+0x2b/0x100 [ 8202.171932 ] __run_timers.part.0+0x152/0x220 [ 8202.172717 ] ? __hrtimer_run_queues+0x171/0x290 [ 8202.173526 ] ? kvm_clock_get_cycles+0xd/0x10 [ 8202.174232 ] ? ktime_get+0x35/0x90 [ 8202.174943 ] run_timer_softirq+0x26/0x50 [ 8202.175745 ] __do_softirq+0xc7/0x271 [ 8202.176373 ] irq_exit_rcu+0x93/0xb0 [ 8202.176983 ] sysvec_apic_timer_interrupt+0x72/0x90 [ 8202.177755 ] </IRQ> [ 8202.178245 ] asm_sysvec_apic_timer_interrupt+0x12/0x20 Fixes: c636a0f0f3f0 ("net/mlx5: Bridge, dynamic entry ageing") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 12 October 2021, 20:51:45 UTC |
48827e1 | Jonas Hahnfeld | 12 October 2021, 20:09:07 UTC | ALSA: usb-audio: Add quirk for VF0770 The device advertises 8 formats, but only a rate of 48kHz is honored by the hardware and 24 bits give chopped audio, so only report the one working combination. This fixes out-of-the-box audio experience with PipeWire which otherwise attempts to choose S24_3LE (while PulseAudio defaulted to S16_LE). Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211012200906.3492-1-hahnjo@hahnjo.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 October 2021, 20:13:11 UTC |
f4d0cc4 | Linus Torvalds | 12 October 2021, 18:16:38 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix CMA gigantic page order for 16K/64K page sizes - Fix section mismatch error in drivers/acpi/arm64/gtdt.c * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: acpi/arm64: fix next_platform_timer() section mismatch error arm64/hugetlb: fix CMA gigantic page order for non-4K PAGE_SIZE | 12 October 2021, 18:16:38 UTC |
ed47291 | Linus Torvalds | 12 October 2021, 18:11:39 UTC | Merge tag 'platform-drivers-x86-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "A second (small) set of pdx86 bug-fixes and new hardware ids for 5.15" * tag 'platform-drivers-x86-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: int1092: Fix non sequential device mode handling platform/x86: intel_skl_int3472: Correct null check platform/x86: gigabyte-wmi: add support for B550 AORUS ELITE AX V2 platform/x86: amd-pmc: Add alternative acpi id for PMC controller platform/x86: intel_scu_ipc: Update timeout value in comment platform/x86: intel_scu_ipc: Increase virtual timeout to 10s platform/x86: intel_scu_ipc: Fix busy loop expiry time platform/x86: dell: Make DELL_WMI_PRIVACY depend on DELL_WMI platform/mellanox: mlxreg-io: Fix read access of n-bytes size attributes platform/mellanox: mlxreg-io: Fix argument base in kstrtou32() call | 12 October 2021, 18:11:39 UTC |
d208b89 | Jiazi Li | 29 September 2021, 11:59:28 UTC | dm: fix mempool NULL pointer race when completing IO dm_io_dec_pending() calls end_io_acct() first and will then dec md in-flight pending count. But if a task is swapping DM table at same time this can result in a crash due to mempool->elements being NULL: task1 task2 do_resume ->do_suspend ->dm_wait_for_completion bio_endio ->clone_endio ->dm_io_dec_pending ->end_io_acct ->wakeup task1 ->dm_swap_table ->__bind ->__bind_mempools ->bioset_exit ->mempool_exit ->free_io [ 67.330330] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ...... [ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 67.330510] pc : mempool_free+0x70/0xa0 [ 67.330515] lr : mempool_free+0x4c/0xa0 [ 67.330520] sp : ffffff8008013b20 [ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004 [ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8 [ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800 [ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800 [ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80 [ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c [ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd [ 67.330563] x15: 000000000093b41e x14: 0000000000000010 [ 67.330569] x13: 0000000000007f7a x12: 0000000034155555 [ 67.330574] x11: 0000000000000001 x10: 0000000000000001 [ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000 [ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a [ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001 [ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8 [ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970 [ 67.330609] Call trace: [ 67.330616] mempool_free+0x70/0xa0 [ 67.330627] bio_put+0xf8/0x110 [ 67.330638] dec_pending+0x13c/0x230 [ 67.330644] clone_endio+0x90/0x180 [ 67.330649] bio_endio+0x198/0x1b8 [ 67.330655] dec_pending+0x190/0x230 [ 67.330660] clone_endio+0x90/0x180 [ 67.330665] bio_endio+0x198/0x1b8 [ 67.330673] blk_update_request+0x214/0x428 [ 67.330683] scsi_end_request+0x2c/0x300 [ 67.330688] scsi_io_completion+0xa0/0x710 [ 67.330695] scsi_finish_command+0xd8/0x110 [ 67.330700] scsi_softirq_done+0x114/0x148 [ 67.330708] blk_done_softirq+0x74/0xd0 [ 67.330716] __do_softirq+0x18c/0x374 [ 67.330724] irq_exit+0xb4/0xb8 [ 67.330732] __handle_domain_irq+0x84/0xc0 [ 67.330737] gic_handle_irq+0x148/0x1b0 [ 67.330744] el1_irq+0xe8/0x190 [ 67.330753] lpm_cpuidle_enter+0x4f8/0x538 [ 67.330759] cpuidle_enter_state+0x1fc/0x398 [ 67.330764] cpuidle_enter+0x18/0x20 [ 67.330772] do_idle+0x1b4/0x290 [ 67.330778] cpu_startup_entry+0x20/0x28 [ 67.330786] secondary_start_kernel+0x160/0x170 Fix this by: 1) Establishing pointers to 'struct dm_io' members in dm_io_dec_pending() so that they may be passed into end_io_acct() _after_ free_io() is called. 2) Moving end_io_acct() after free_io(). Cc: stable@vger.kernel.org Signed-off-by: Jiazi Li <lijiazi@xiaomi.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 12 October 2021, 17:54:10 UTC |
b4459b1 | Ming Lei | 23 September 2021, 09:11:31 UTC | dm rq: don't queue request to blk-mq during DM suspend DM uses blk-mq's quiesce/unquiesce to stop/start device mapper queue. But blk-mq's unquiesce may come from outside events, such as elevator switch, updating nr_requests or others, and request may come during suspend, so simply ask for blk-mq to requeue it. Fixes one kernel panic issue when running updating nr_requests and dm-mpath suspend/resume stress test. Cc: stable@vger.kernel.org Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 12 October 2021, 17:54:10 UTC |
ec132ef | Colin Ian King | 15 September 2021, 11:14:40 UTC | dm clone: make array 'descs' static Don't populate the read-only array descs on the stack but instead it static and add extra const. Also makes the object code smaller by 66 bytes: Before: text data bss dec hex filename 42382 11140 512 54034 d312 ./drivers/md/dm-clone-target.o After: text data bss dec hex filename 42220 11236 512 53968 d2d0 ./drivers/md/dm-clone-target.o (gcc version 11.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 12 October 2021, 17:54:10 UTC |
2c0468e | Akilesh Kailash | 13 September 2021, 09:26:42 UTC | dm verity: skip redundant verity_handle_err() on I/O errors Without FEC, dm-verity won't call verity_handle_err() when I/O fails, but with FEC enabled, it currently does even if an I/O error has occurred. If there is an I/O error and FEC correction fails, return the error instead of calling verity_handle_err() again. Suggested-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Akilesh Kailash <akailash@google.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 12 October 2021, 17:54:09 UTC |
596143e | Jackie Liu | 23 August 2021, 09:25:26 UTC | acpi/arm64: fix next_platform_timer() section mismatch error Fix modpost Section mismatch error in next_platform_timer(). [...] WARNING: modpost: vmlinux.o(.text.unlikely+0x26e60): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references the variable __initdata acpi_gtdt_desc. This is often because next_platform_timer lacks a __initdata annotation or the annotation of acpi_gtdt_desc is wrong. WARNING: modpost: vmlinux.o(.text.unlikely+0x26e64): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references the variable __initdata acpi_gtdt_desc. This is often because next_platform_timer lacks a __initdata annotation or the annotation of acpi_gtdt_desc is wrong. ERROR: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. make[1]: *** [scripts/Makefile.modpost:59: vmlinux.symvers] Error 1 make[1]: *** Deleting file 'vmlinux.symvers' make: *** [Makefile:1176: vmlinux] Error 2 [...] Fixes: a712c3ed9b8a ("acpi/arm64: Add memory-mapped timer support in GTDT driver") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20210823092526.2407526-1-liu.yun@linux.dev Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 12 October 2021, 16:41:19 UTC |
7904022 | Dan Carpenter | 12 October 2021, 08:44:43 UTC | block/rnbd-clt-sysfs: fix a couple uninitialized variable bugs These variables are printed on the error path if match_int() fails so they have to be initialized. Fixes: 2958a995edc9 ("block/rnbd-clt: Support polling mode for IO latency optimization") Fixes: 1eb54f8f5dd8 ("block/rnbd: client: sysfs interface functions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Gioh Kim <gi-oh.kim@ionos.com> Link: https://lore.kernel.org/r/20211012084443.GA31472@kili Signed-off-by: Jens Axboe <axboe@kernel.dk> | 12 October 2021, 16:39:57 UTC |
bc22b62 | Florian Fainelli | 08 October 2021, 22:28:46 UTC | Merge tag 'tags/bcm2835-dt-fixes-2021-10-06' into devicetree/fixes A series of devicetree fixes for the Raspberry Pi 4: - Fix VEC reg address - Fix MDIO address/size cells - Fix regulator states - Fix PCIe address formatting Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> | 12 October 2021, 16:14:30 UTC |
3f32472 | Nicolas Saenz Julienne | 31 August 2021, 12:58:43 UTC | ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address The unit address is supposed to represent '<device>,<function>'. Which are both 0 for RPi4b's XHCI controller. On top of that although OpenFirmware states bus number goes in the high part of the last reg parameter, FDT doesn't seem to care for it[1], so remove it. [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210830103909.323356-1-nsaenzju@redhat.com/#24414633 Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node") Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210831125843.1233488-2-nsaenzju@redhat.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> | 12 October 2021, 16:14:26 UTC |
13dbc95 | Nicolas Saenz Julienne | 31 August 2021, 12:58:42 UTC | ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting dtbs_check currently complains that: arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0" Unsurprisingly pci@0,0 is the right address, as illustrated by its reg property: &pcie0 { pci@0,0 { /* * As defined in the IEEE Std 1275-1994 document, * reg is a five-cell address encoded as (phys.hi * phys.mid phys.lo size.hi size.lo). phys.hi * should contain the device's BDF as 0b00000000 * bbbbbbbb dddddfff 00000000. The other cells * should be zero. */ reg = <0 0 0 0 0>; }; }; The device is clearly 0. So fix it. Also add a missing 'device_type = "pci"'. Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node") Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210831125843.1233488-1-nsaenzju@redhat.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> | 12 October 2021, 16:14:16 UTC |
b37a151 | Kai Vehmanen | 12 October 2021, 14:29:35 UTC | ALSA: hda: avoid write to STATESTS if controller is in reset The snd_hdac_bus_reset_link() contains logic to clear STATESTS register before performing controller reset. This code dates back to an old bugfix in commit e8a7f136f5ed ("[ALSA] hda-intel - Improve HD-audio codec probing robustness"). Originally the code was added to azx_reset(). The code was moved around in commit a41d122449be ("ALSA: hda - Embed bus into controller object") and ended up to snd_hdac_bus_reset_link() and called primarily via snd_hdac_bus_init_chip(). The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is called when controller is not in reset. In this case, STATESTS can be cleared. This can be useful e.g. when forcing a controller reset to retry codec probe. A normal non-power-on reset will not clear the bits. However, this old logic is problematic when controller is already in reset. The HDA specification states that controller must be taken out of reset before writing to registers other than GCTL.CRST (1.0a spec, 3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost if the controller is already in reset per the HDA specification mentioned. This has been harmless on older hardware. On newer generation of Intel PCIe based HDA controllers, if configured to report issues, this write will emit an unsupported request error. If ACPI Platform Error Interface (APEI) is enabled in kernel, this will end up to kernel log. Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if the function is called when controller is not in reset. Otherwise clearing the bits is not possible and should be skipped. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 October 2021, 16:05:28 UTC |
8607954 | Konstantin Komarov | 11 October 2021, 16:43:29 UTC | fs/ntfs3: Check for NULL pointers in ni_try_remove_attr_list Check for potential NULL pointers. Print error message if found. Thread, that leads to this commit: https://lore.kernel.org/ntfs3/227c13e3-5a22-0cba-41eb-fcaf41940711@paragon-software.com/ Reported-by: Mohammad Rasim <mohammad.rasim96@gmail.com> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> | 12 October 2021, 15:53:03 UTC |