Revision 8e3c500594dca9a12c27eb6d77b82e0766879bfd authored by Johannes Berg on 22 April 2015, 09:55:14 UTC, committed by Al Viro on 24 April 2015, 19:45:03 UTC
Al Viro's IOV changes broke 9p readdir() because the new code didn't abort the read when it returned nothing. The original code checked if the combined error/length was <= 0 but in the new code that accidentally got changed to just an error check. Add back the return from the function when nothing is read. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: e1200fe68f20 ("9p: switch p9_client_read() to passing struct iov_iter *") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1 parent bb66873
gdb-kernel-debugging.txt
Debugging kernel and modules via gdb
====================================
The kernel debugger kgdb, hypervisors like QEMU or JTAG-based hardware
interfaces allow to debug the Linux kernel and its modules during runtime
using gdb. Gdb comes with a powerful scripting interface for python. The
kernel provides a collection of helper scripts that can simplify typical
kernel debugging steps. This is a short tutorial about how to enable and use
them. It focuses on QEMU/KVM virtual machines as target, but the examples can
be transferred to the other gdb stubs as well.
Requirements
------------
o gdb 7.2+ (recommended: 7.4+) with python support enabled (typically true
for distributions)
Setup
-----
o Create a virtual Linux machine for QEMU/KVM (see www.linux-kvm.org and
www.qemu.org for more details). For cross-development,
http://landley.net/aboriginal/bin keeps a pool of machine images and
toolchains that can be helpful to start from.
o Build the kernel with CONFIG_GDB_SCRIPTS enabled, but leave
CONFIG_DEBUG_INFO_REDUCED off. If your architecture supports
CONFIG_FRAME_POINTER, keep it enabled.
o Install that kernel on the guest.
Alternatively, QEMU allows to boot the kernel directly using -kernel,
-append, -initrd command line switches. This is generally only useful if
you do not depend on modules. See QEMU documentation for more details on
this mode.
o Enable the gdb stub of QEMU/KVM, either
- at VM startup time by appending "-s" to the QEMU command line
or
- during runtime by issuing "gdbserver" from the QEMU monitor
console
o cd /path/to/linux-build
o Start gdb: gdb vmlinux
Note: Some distros may restrict auto-loading of gdb scripts to known safe
directories. In case gdb reports to refuse loading vmlinux-gdb.py, add
add-auto-load-safe-path /path/to/linux-build
to ~/.gdbinit. See gdb help for more details.
o Attach to the booted guest:
(gdb) target remote :1234
Examples of using the Linux-provided gdb helpers
------------------------------------------------
o Load module (and main kernel) symbols:
(gdb) lx-symbols
loading vmlinux
scanning for modules in /home/user/linux/build
loading @0xffffffffa0020000: /home/user/linux/build/net/netfilter/xt_tcpudp.ko
loading @0xffffffffa0016000: /home/user/linux/build/net/netfilter/xt_pkttype.ko
loading @0xffffffffa0002000: /home/user/linux/build/net/netfilter/xt_limit.ko
loading @0xffffffffa00ca000: /home/user/linux/build/net/packet/af_packet.ko
loading @0xffffffffa003c000: /home/user/linux/build/fs/fuse/fuse.ko
...
loading @0xffffffffa0000000: /home/user/linux/build/drivers/ata/ata_generic.ko
o Set a breakpoint on some not yet loaded module function, e.g.:
(gdb) b btrfs_init_sysfs
Function "btrfs_init_sysfs" not defined.
Make breakpoint pending on future shared library load? (y or [n]) y
Breakpoint 1 (btrfs_init_sysfs) pending.
o Continue the target
(gdb) c
o Load the module on the target and watch the symbols being loaded as well as
the breakpoint hit:
loading @0xffffffffa0034000: /home/user/linux/build/lib/libcrc32c.ko
loading @0xffffffffa0050000: /home/user/linux/build/lib/lzo/lzo_compress.ko
loading @0xffffffffa006e000: /home/user/linux/build/lib/zlib_deflate/zlib_deflate.ko
loading @0xffffffffa01b1000: /home/user/linux/build/fs/btrfs/btrfs.ko
Breakpoint 1, btrfs_init_sysfs () at /home/user/linux/fs/btrfs/sysfs.c:36
36 btrfs_kset = kset_create_and_add("btrfs", NULL, fs_kobj);
o Dump the log buffer of the target kernel:
(gdb) lx-dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-rc4-dbg+ (...
[ 0.000000] Command line: root=/dev/sda2 resume=/dev/sda1 vga=0x314
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
....
o Examine fields of the current task struct:
(gdb) p $lx_current().pid
$1 = 4998
(gdb) p $lx_current().comm
$2 = "modprobe\000\000\000\000\000\000\000"
o Make use of the per-cpu function for the current or a specified CPU:
(gdb) p $lx_per_cpu("runqueues").nr_running
$3 = 1
(gdb) p $lx_per_cpu("runqueues", 2).nr_running
$4 = 0
o Dig into hrtimers using the container_of helper:
(gdb) set $next = $lx_per_cpu("hrtimer_bases").clock_base[0].active.next
(gdb) p *$container_of($next, "struct hrtimer", "node")
$5 = {
node = {
node = {
__rb_parent_color = 18446612133355256072,
rb_right = 0x0 <irq_stack_union>,
rb_left = 0x0 <irq_stack_union>
},
expires = {
tv64 = 1835268000000
}
},
_softexpires = {
tv64 = 1835268000000
},
function = 0xffffffff81078232 <tick_sched_timer>,
base = 0xffff88003fd0d6f0,
state = 1,
start_pid = 0,
start_site = 0xffffffff81055c1f <hrtimer_start_range_ns+20>,
start_comm = "swapper/2\000\000\000\000\000\000"
}
List of commands and functions
------------------------------
The number of commands and convenience functions may evolve over the time,
this is just a snapshot of the initial version:
(gdb) apropos lx
function lx_current -- Return current task
function lx_module -- Find module by name and return the module variable
function lx_per_cpu -- Return per-cpu variable
function lx_task_by_pid -- Find Linux task by PID and return the task_struct variable
function lx_thread_info -- Calculate Linux thread_info from task variable
lx-dmesg -- Print Linux kernel log buffer
lx-lsmod -- List currently loaded modules
lx-symbols -- (Re-)load symbols of Linux kernel and currently loaded modules
Detailed help can be obtained via "help <command-name>" for commands and "help
function <function-name>" for convenience functions.
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...