'--------------------------------------------------------------------------------
' IMPORT RIG-SPECIFIC PARAMETERS AND UNIVERSAL PARAMETERS
'--------------------------------------------------------------------------------
#include "C:\\Users\\Public\\RaymondLabCode\\Experiment Protocols\\RigChoice.s2s"
#include "C:\\Users\\Public\\RaymondLabCode\\Experiment Protocols\\Parameters_Universal.s2s"

'--------------------------------------------------------------------------------
' MAIN PROGRAM
'--------------------------------------------------------------------------------
ToolbarConfig();


'--------------------------------------------------------------------------------
' Toolbar Callbacks
'--------------------------------------------------------------------------------
Func ToolbarIdle%()
  'This function calls repeatedly whenever nothing else is happening
  'if runExmpt=1, it is used to run a full expmt automatically.  -HP
  'expmtMode: 0=habit, 1=0x, 2=2x, 3=ipsi stim, 4=contra stim
  'test: 0=wait, 1=test, 2=train

  ' Check a valid sampling view is running
  var currView := ViewKind();
  if  currView <> 0 then
      return 1;
  endif;

  ' Keep sine wave from drifting
  if MaxTime() > (prevTime + 1/sinHzChair) then
    if driftFix = 1 then
      driftFix%();
    endif;
  endif;


  'If an experiment is running:
  if runExpmt% = 1 then

      'Check the time. Seconds is the current time - compare it to the goal time of each segment
      if  MaxTime() > goalTime then

          docase

          ' GAP A
          case test% = 0 then
            SampleKey("x");
            goalTime := MaxTime() + 5;
            ToolbarInit%(); Yield();
            test% := 7;

          ' GAP B
          case test% = 7 then
            goalTime := MaxTime() + 5;
            ToolbarInit%(); Yield();


            ' Go to Pre/Post or Train/Test Section
            docase
              ' PRE & POST Tests
              case expmtLoc% = 1 then
                test% := 1;
              ' TEST/TRAIN Blocks
              case expmtLoc% = 2 then
                test% := 2;
                ' If you have already done the test/train blocks, quit instead.
                if rep% = (nBlocks%+1)  then
                  ToolbarQuitExpmt%();
                  Return(1);
                endif
            endcase

            runFlash(); Yield();
            ToolbarInit%(); Yield();

          ' PRE AND POST TEST
          case test% = 1 then
            SampleKey("1");
            SampleKey("X");
            goalTime := MaxTime() + testLength;
            test% := 0;

            ' Keep track of how many PRE/POST tests that you've run
            prePostNum := prePostNum + 1;

            if prePostNum > 3 then
              expmtLoc% := 2;
              ' This check is for the 'T-35' test
              if rep% < nBlocks% then
                prePostNum := 1;
              endif
            else
              expmtLoc% := 1;
            endif

            if expmtMode = 5 then
              ToolbarStepOn%();
            else
              ToolbarSineStart%();
            endif;

          ' BLOCK: TRAIN
          case test% = 2 then
            SampleKey("X");
            goalTime := MaxTime() + runLength;

            if rep% < (nBlocks%+1) then
              docase
                '3 = ipsi, 4 = contra
                case expmtMode = 3 or expmtMode = 4 then
                    ToolbarSineStart%();
                    ToolbarStimOn%();
                '1 = x0, 2 = x2
                case expmtMode = 1 or expmtMode = 2 then
                    ToolbarSineStart%();
                    ToolbarLightOn%();
                '5 = step
                case expmtMode = 5 then
                    ToolbarStepOff%(); Yield();
                    ToolbarLightOn%(); Yield();
                    ToolbarStepOn%();
              endcase;

            endif;

            if rep% = (nBlocks%) then
              if expmtMode = 5 then
                ToolbarStimOff%();
                ToolbarStepOff%();
              else
                ToolbarLightOff%();
                ToolbarSineStop%();
              endif;
              expmtLoc% := 1;
            endif;

            test% := 3;

          ' BLOCK: TEST
          case test% = 3 then
            SampleKey("x");
            SampleKey("X");
            goalTime := MaxTime() + testLength;
            testrep% := testrep% + 1;

            if expmtMode = 5 then
              ToolbarStimOff%();
              ToolbarStepOn%();
            else
                ToolbarLightOff%(); Yield();
            endif;

            if testrep% = nTestreps% then
              rep% := rep% + 1;
              testrep% := 0;
            endif;

            if rep% = (nBlocks%) then
              expmtLoc% := 1;
            endif

            if rep% = (nBlocks% + 1) then
              if expmtMode = 5 then
                ToolbarStimOff%();
                ToolbarStepOn%();
              else
                ToolbarSineStart%();
              endif;
              test% := 9;
            else
              test% := 0;
            endif

          case test% = 9 then
            ToolbarQuitExpmt%();
            Return(1);

          endcase;
      endif;
  endif;
  Return(1);
End

'--------------------------------------------------------------------------------
'Configure expmt settings window
'--------------------------------------------------------------------------------
Func ToolbarConfigExpmt%()
  DlgCreate("Experiment settings");  'Start new dialog
  DlgInteger(1,"Number of run-test blocks",0,100,0,0,1);
  DlgInteger(2,"Number of tests per block",1,100,0,0,1);    'set to 0 if not using Chair
  DlgReal(3,"Run length (s)",0,5000);
  DlgReal(4,"Test length (s)",0,5000);
  DlgList(5,"Expmt mode", "habit|x0|x2|ipsi|contra|steps");
  DlgInteger(6,"Light flash on?)",0,1,0,0,"0|1");
  DlgReal(7,"Test stim and bilat (0 or 1)",0,1);

  DlgShow(nBlocks%, nTestreps%, runLength, testLength, expmtMode, flashon%,testStim);

  docase
  case expmtMode = 0 then     'habit
      sinPhDrum := 90;
      sinPhChair := 90;
      sinAmpChair := 10;
      sinAmpDrum := 0;
  case expmtMode = 1 then     'x0
      sinPhDrum := 90;
      sinPhChair := 90;
      sinAmpChair := 10;
      sinAmpDrum := 10;
  case expmtMode = 2 then     'x2
      sinPhDrum := -90;
      sinPhChair := 90;
      sinAmpChair := 10;
      sinAmpDrum := 10;
  case expmtMode = 3  then     'ipsi
      sinPhChair := 90;
      sinAmpDrum := 0;
  case expmtMode = 4 then      'contra
      sinPhChair := -90;
      sinAmpDrum := 0;
  case expmtMode = 5 then      'steps
      StepConfigWindow%();
  endcase;


  if testStim > 0 then
      ToolbarPulseConfig%()
  endif;

  SetSequencerValues();
  Return(1);
End