Revision 8f5d27084d9832f75bc6e6bfdde7622e1e1bf798 authored by Linus Torvalds on 22 June 2014, 05:01:15 UTC, committed by Linus Torvalds on 22 June 2014, 05:01:15 UTC
Pull i2c new drivers from Wolfram Sang:
 "Here is a pull request from i2c hoping for the "new driver" rule.

  Originally, I wanted to send this request during the merge window, but
  code checkers with very recent additions complained, so a few fixups
  were needed.  So, some more time went by and I merged rc1 to get a
  stable base"

So the "new driver" rule is really about drivers that people absolutely
need for the kernel to work on new hardware, which is not so much the
case for i2c.  So I considered not pulling this, but eventually
relented.

Just for FYI: the whole (and only) point of "new drivers" is not that
new drivers cannot regress things (they can, and they have - by
triggering badly tested code on machines that never triggered that code
before), but because they can bring to life machines that otherwise
wouldn't be useful at all without the drivers.

So the new driver rule is for essential things that actual consumers
would care about, ie devices like networking or disk drivers that matter
to normal people (not server people - they run old kernels anyway, so
mainlining new drivers is irrelevant for them).

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: sun6-p2wi: fix call to snprintf
  i2c: rk3x: add NULL entry to the end of_device_id array
  i2c: sun6i-p2wi: use proper return value in probe
  i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support
  i2c: sunxi: add P2WI DT bindings documentation
  i2c: rk3x: add driver for Rockchip RK3xxx SoC I2C adapter
2 parent s 2dfded8 + f0b1f64
Raw File
anon_inodes.c
/*
 *  fs/anon_inodes.c
 *
 *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
 *
 *  Thanks to Arnd Bergmann for code review and suggestions.
 *  More changes for Thomas Gleixner suggestions.
 *
 */

#include <linux/cred.h>
#include <linux/file.h>
#include <linux/poll.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/mount.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/magic.h>
#include <linux/anon_inodes.h>

#include <asm/uaccess.h>

static struct vfsmount *anon_inode_mnt __read_mostly;
static struct inode *anon_inode_inode;

/*
 * anon_inodefs_dname() is called from d_path().
 */
static char *anon_inodefs_dname(struct dentry *dentry, char *buffer, int buflen)
{
	return dynamic_dname(dentry, buffer, buflen, "anon_inode:%s",
				dentry->d_name.name);
}

static const struct dentry_operations anon_inodefs_dentry_operations = {
	.d_dname	= anon_inodefs_dname,
};

static struct dentry *anon_inodefs_mount(struct file_system_type *fs_type,
				int flags, const char *dev_name, void *data)
{
	return mount_pseudo(fs_type, "anon_inode:", NULL,
			&anon_inodefs_dentry_operations, ANON_INODE_FS_MAGIC);
}

static struct file_system_type anon_inode_fs_type = {
	.name		= "anon_inodefs",
	.mount		= anon_inodefs_mount,
	.kill_sb	= kill_anon_super,
};

/**
 * anon_inode_getfile - creates a new file instance by hooking it up to an
 *                      anonymous inode, and a dentry that describe the "class"
 *                      of the file
 *
 * @name:    [in]    name of the "class" of the new file
 * @fops:    [in]    file operations for the new file
 * @priv:    [in]    private data for the new file (will be file's private_data)
 * @flags:   [in]    flags
 *
 * Creates a new file by hooking it on a single inode. This is useful for files
 * that do not need to have a full-fledged inode in order to operate correctly.
 * All the files created with anon_inode_getfile() will share a single inode,
 * hence saving memory and avoiding code duplication for the file/inode/dentry
 * setup.  Returns the newly created file* or an error pointer.
 */
struct file *anon_inode_getfile(const char *name,
				const struct file_operations *fops,
				void *priv, int flags)
{
	struct qstr this;
	struct path path;
	struct file *file;

	if (IS_ERR(anon_inode_inode))
		return ERR_PTR(-ENODEV);

	if (fops->owner && !try_module_get(fops->owner))
		return ERR_PTR(-ENOENT);

	/*
	 * Link the inode to a directory entry by creating a unique name
	 * using the inode sequence number.
	 */
	file = ERR_PTR(-ENOMEM);
	this.name = name;
	this.len = strlen(name);
	this.hash = 0;
	path.dentry = d_alloc_pseudo(anon_inode_mnt->mnt_sb, &this);
	if (!path.dentry)
		goto err_module;

	path.mnt = mntget(anon_inode_mnt);
	/*
	 * We know the anon_inode inode count is always greater than zero,
	 * so ihold() is safe.
	 */
	ihold(anon_inode_inode);

	d_instantiate(path.dentry, anon_inode_inode);

	file = alloc_file(&path, OPEN_FMODE(flags), fops);
	if (IS_ERR(file))
		goto err_dput;
	file->f_mapping = anon_inode_inode->i_mapping;

	file->f_flags = flags & (O_ACCMODE | O_NONBLOCK);
	file->private_data = priv;

	return file;

err_dput:
	path_put(&path);
err_module:
	module_put(fops->owner);
	return file;
}
EXPORT_SYMBOL_GPL(anon_inode_getfile);

/**
 * anon_inode_getfd - creates a new file instance by hooking it up to an
 *                    anonymous inode, and a dentry that describe the "class"
 *                    of the file
 *
 * @name:    [in]    name of the "class" of the new file
 * @fops:    [in]    file operations for the new file
 * @priv:    [in]    private data for the new file (will be file's private_data)
 * @flags:   [in]    flags
 *
 * Creates a new file by hooking it on a single inode. This is useful for files
 * that do not need to have a full-fledged inode in order to operate correctly.
 * All the files created with anon_inode_getfd() will share a single inode,
 * hence saving memory and avoiding code duplication for the file/inode/dentry
 * setup.  Returns new descriptor or an error code.
 */
int anon_inode_getfd(const char *name, const struct file_operations *fops,
		     void *priv, int flags)
{
	int error, fd;
	struct file *file;

	error = get_unused_fd_flags(flags);
	if (error < 0)
		return error;
	fd = error;

	file = anon_inode_getfile(name, fops, priv, flags);
	if (IS_ERR(file)) {
		error = PTR_ERR(file);
		goto err_put_unused_fd;
	}
	fd_install(fd, file);

	return fd;

err_put_unused_fd:
	put_unused_fd(fd);
	return error;
}
EXPORT_SYMBOL_GPL(anon_inode_getfd);

static int __init anon_inode_init(void)
{
	anon_inode_mnt = kern_mount(&anon_inode_fs_type);
	if (IS_ERR(anon_inode_mnt))
		panic("anon_inode_init() kernel mount failed (%ld)\n", PTR_ERR(anon_inode_mnt));

	anon_inode_inode = alloc_anon_inode(anon_inode_mnt->mnt_sb);
	if (IS_ERR(anon_inode_inode))
		panic("anon_inode_init() inode allocation failed (%ld)\n", PTR_ERR(anon_inode_inode));

	return 0;
}

fs_initcall(anon_inode_init);

back to top