Revision 8fb46293e48a71fe533bb76ff9e74f41fcd30e1e authored by Gautier Hattenberger on 19 November 2019, 08:21:49 UTC, committed by GitHub on 19 November 2019, 08:21:49 UTC
This features are needed for some board to close properly the log files.
This is now board specific, Tawaki, Apogee and Chimera are the only one
concerned so far.

- increase ADC predivider to relax DMA throughtput pressure on memory
- don't flush individually every open file, but close filsesystem to speed filesystem closing when power drop is detected
- relaxing all unnecessary PINs to input floating to save energy
1 parent 5cf27ee
Raw File
mc24_j.xml
<?xml version="1.0"?>
<!-- $Id$
--
-- (c) 2003 Pascal Brisset, Antoine Drouin
--
-- This file is part of paparazzi.
--
-- paparazzi is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-- any later version.
--
-- paparazzi is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with paparazzi; see the file COPYING.  If not, write to
-- the Free Software Foundation, 59 Temple Place - Suite 330,
-- Boston, MA 02111-1307, USA.
-->

<!--
-- Attributes of root (Radio) tag :
-- name: name of RC
-- data_min: min width of a pulse to be considered as a data pulse
-- data_max: max width of a pulse to be considered as a data pulse
-- sync_min: min width of a pulse to be considered as a synchro pulse
-- sync_max: max width of a pulse to be considered as a synchro pulse
-- min, max and sync are expressed in micro-seconds
-->

<!--
-- Attributes of channel tag :
-- ctl: name of the command on the transmitter - only for displaying
-- function: logical command
-- average: (boolean) channel filtered through several frames (for discrete commands)
-- min: minimum pulse length (micro-seconds)
-- max: maximum pulse length (micro-seconds)
-- neutral: neutral pulse length (micro-seconds)
-- Note: a command may be reversed by exchanging min and max values
-->



<!DOCTYPE radio SYSTEM "radio.dtd">
<radio name="mc24" data_min="800" data_max="2200" sync_min="5000" sync_max="15000" pulse_type="NEGATIVE">
  <channel ctl="D" function="THROTTLE" min="1096" neutral="1096" max="1900" average="0"/>
  <channel ctl="C" function="YAW"     min="1096" neutral="1500" max="1900" average="0"/>
  <channel ctl="B" function="PITCH"    min="1900" neutral="1500" max="1096" average="0"/>
  <channel ctl="A" function="ROLL"      min="1096" neutral="1500" max="1900" average="0"/>
  <channel ctl="G" function="SWITCH1"  min="1096" neutral="1500" max="1900" average="1"/>
  <channel ctl="E" function="GAIN1"    min="1096" neutral="1500" max="1900" average="1"/>
  <channel ctl="F" function="CALIB"    min="1096" neutral="1500" max="1900" average="1"/>
  <channel ctl="H" function="MODE"  min="966" neutral="1500" max="2025" average="1"/>
  <channel ctl="I" function="SWITCH2"  min="1096" neutral="1500" max="1900" average="1"/>
</radio>
back to top