Revision 91194e9b046e18ed813d4632e1c72683aac944ad authored by Alexander A. Klimov on 12 July 2020, 11:11:18 UTC, committed by Rich Felker on 15 August 2020, 02:05:12 UTC
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Rich Felker <dalias@libc.org>
1 parent e1a8d38
stmp_device.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
* Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
* Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
*/
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/compiler.h>
#include <linux/export.h>
#include <linux/stmp_device.h>
#define STMP_MODULE_CLKGATE (1 << 30)
#define STMP_MODULE_SFTRST (1 << 31)
/*
* Clear the bit and poll it cleared. This is usually called with
* a reset address and mask being either SFTRST(bit 31) or CLKGATE
* (bit 30).
*/
static int stmp_clear_poll_bit(void __iomem *addr, u32 mask)
{
int timeout = 0x400;
writel(mask, addr + STMP_OFFSET_REG_CLR);
udelay(1);
while ((readl(addr) & mask) && --timeout)
/* nothing */;
return !timeout;
}
int stmp_reset_block(void __iomem *reset_addr)
{
int ret;
int timeout = 0x400;
/* clear and poll SFTRST */
ret = stmp_clear_poll_bit(reset_addr, STMP_MODULE_SFTRST);
if (unlikely(ret))
goto error;
/* clear CLKGATE */
writel(STMP_MODULE_CLKGATE, reset_addr + STMP_OFFSET_REG_CLR);
/* set SFTRST to reset the block */
writel(STMP_MODULE_SFTRST, reset_addr + STMP_OFFSET_REG_SET);
udelay(1);
/* poll CLKGATE becoming set */
while ((!(readl(reset_addr) & STMP_MODULE_CLKGATE)) && --timeout)
/* nothing */;
if (unlikely(!timeout))
goto error;
/* clear and poll SFTRST */
ret = stmp_clear_poll_bit(reset_addr, STMP_MODULE_SFTRST);
if (unlikely(ret))
goto error;
/* clear and poll CLKGATE */
ret = stmp_clear_poll_bit(reset_addr, STMP_MODULE_CLKGATE);
if (unlikely(ret))
goto error;
return 0;
error:
pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
return -ETIMEDOUT;
}
EXPORT_SYMBOL(stmp_reset_block);
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...