Revision 91facc22dec964683aef88f5620a790a6e46b98a authored by Johannes Berg on 22 December 2010, 01:24:28 UTC, committed by Linus Torvalds on 23 December 2010, 03:43:34 UTC
When I added led_blink_set I had a typo: the return value of the hw offload is a regular error code that is zero when succesful, and in that case software emulation should not be used, rather than the other way around. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent 5a2d6e3
tmp421
Kernel driver tmp421
====================
Supported chips:
* Texas Instruments TMP421
Prefix: 'tmp421'
Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html
* Texas Instruments TMP422
Prefix: 'tmp422'
Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html
* Texas Instruments TMP423
Prefix: 'tmp423'
Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html
Authors:
Andre Prendel <andre.prendel@gmx.de>
Description
-----------
This driver implements support for Texas Instruments TMP421, TMP422
and TMP423 temperature sensor chips. These chips implement one local
and up to one (TMP421), up to two (TMP422) or up to three (TMP423)
remote sensors. Temperature is measured in degrees Celsius. The chips
are wired over I2C/SMBus and specified over a temperature range of -40
to +125 degrees Celsius. Resolution for both the local and remote
channels is 0.0625 degree C.
The chips support only temperature measurement. The driver exports
the temperature values via the following sysfs files:
temp[1-4]_input
temp[2-4]_fault
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...