Revision 9215310cf13bccfe777500986d562d53bdb63537 authored by Linus Torvalds on 15 June 2018, 22:39:34 UTC, committed by Linus Torvalds on 15 June 2018, 22:39:34 UTC
Pull networking fixes from David Miller: 1) Various netfilter fixlets from Pablo and the netfilter team. 2) Fix regression in IPVS caused by lack of PMTU exceptions on local routes in ipv6, from Julian Anastasov. 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia. 4) Don't crash on poll in TLS, from Daniel Borkmann. 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things including Avahi mDNS. From Bart Van Assche. 6) Missing of_node_put in qcom/emac driver, from Yue Haibing. 7) We lack checking of the TCP checking in one special case during SYN receive, from Frank van der Linden. 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg. 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman. 10) Must grab HW caps before doing quirk checks in stmmac driver, from Jose Abreu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: stmmac: Run HWIF Quirks after getting HW caps neighbour: skip NTF_EXT_LEARNED entries during forced gc net: cxgb3: add error handling for sysfs_create_group tls: fix waitall behavior in tls_sw_recvmsg tls: fix use-after-free in tls_push_record l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl() l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels mlxsw: spectrum_switchdev: Fix port_vlan refcounting mlxsw: spectrum_router: Align with new route replace logic mlxsw: spectrum_router: Allow appending to dev-only routes ipv6: Only emit append events for appended routes stmmac: added support for 802.1ad vlan stripping cfg80211: fix rcu in cfg80211_unregister_wdev mac80211: Move up init of TXQs mac80211_hwsim: fix module init error paths cfg80211: initialize sinfo in cfg80211_get_station nl80211: fix some kernel doc tag mistakes hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload rds: avoid unenecessary cong_update in loop transport l2tp: clean up stale tunnel or session in pppol2tp_connect's error path ...
coccicheck
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Linux kernel coccicheck
#
# Read Documentation/dev-tools/coccinelle.rst
#
# This script requires at least spatch
# version 1.0.0-rc11.
DIR="$(dirname $(readlink -f $0))/.."
SPATCH="`which ${SPATCH:=spatch}`"
if [ ! -x "$SPATCH" ]; then
echo 'spatch is part of the Coccinelle project and is available at http://coccinelle.lip6.fr/'
exit 1
fi
SPATCH_VERSION=$($SPATCH --version | head -1 | awk '{print $3}')
SPATCH_VERSION_NUM=$(echo $SPATCH_VERSION | ${DIR}/scripts/ld-version.sh)
USE_JOBS="no"
$SPATCH --help | grep "\-\-jobs" > /dev/null && USE_JOBS="yes"
# The verbosity may be set by the environmental parameter V=
# as for example with 'make V=1 coccicheck'
if [ -n "$V" -a "$V" != "0" ]; then
VERBOSE="$V"
else
VERBOSE=0
fi
FLAGS="--very-quiet"
# You can use SPFLAGS to append extra arguments to coccicheck or override any
# heuristics done in this file as Coccinelle accepts the last options when
# options conflict.
#
# A good example for use of SPFLAGS is if you want to debug your cocci script,
# you can for instance use the following:
#
# $ export COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci
# $ make coccicheck MODE=report DEBUG_FILE="all.err" SPFLAGS="--profile --show-trying" M=./drivers/mfd/arizona-irq.c
#
# "--show-trying" should show you what rule is being processed as it goes to
# stdout, you do not need a debug file for that. The profile output will be
# be sent to stdout, if you provide a DEBUG_FILE the profiling data can be
# inspected there.
#
# --profile will not output if --very-quiet is used, so avoid it.
echo $SPFLAGS | egrep -e "--profile|--show-trying" 2>&1 > /dev/null
if [ $? -eq 0 ]; then
FLAGS="--quiet"
fi
# spatch only allows include directories with the syntax "-I include"
# while gcc also allows "-Iinclude" and "-include include"
COCCIINCLUDE=${LINUXINCLUDE//-I/-I }
COCCIINCLUDE=${COCCIINCLUDE// -include/ --include}
if [ "$C" = "1" -o "$C" = "2" ]; then
ONLINE=1
# Take only the last argument, which is the C file to test
shift $(( $# - 1 ))
OPTIONS="$COCCIINCLUDE $1"
# No need to parallelize Coccinelle since this mode takes one input file.
NPROC=1
else
ONLINE=0
if [ "$KBUILD_EXTMOD" = "" ] ; then
OPTIONS="--dir $srctree $COCCIINCLUDE"
else
OPTIONS="--dir $KBUILD_EXTMOD $COCCIINCLUDE"
fi
if [ -z "$J" ]; then
NPROC=$(getconf _NPROCESSORS_ONLN)
else
NPROC="$J"
fi
fi
if [ "$KBUILD_EXTMOD" != "" ] ; then
OPTIONS="--patch $srctree $OPTIONS"
fi
# You can override by using SPFLAGS
if [ "$USE_JOBS" = "no" ]; then
trap kill_running SIGTERM SIGINT
declare -a SPATCH_PID
elif [ "$NPROC" != "1" ]; then
# Using 0 should work as well, refer to _SC_NPROCESSORS_ONLN use on
# https://github.com/rdicosmo/parmap/blob/master/setcore_stubs.c
OPTIONS="$OPTIONS --jobs $NPROC --chunksize 1"
fi
if [ "$MODE" = "" ] ; then
if [ "$ONLINE" = "0" ] ; then
echo 'You have not explicitly specified the mode to use. Using default "report" mode.'
echo 'Available modes are the following: patch, report, context, org'
echo 'You can specify the mode with "make coccicheck MODE=<mode>"'
echo 'Note however that some modes are not implemented by some semantic patches.'
fi
MODE="report"
fi
if [ "$MODE" = "chain" ] ; then
if [ "$ONLINE" = "0" ] ; then
echo 'You have selected the "chain" mode.'
echo 'All available modes will be tried (in that order): patch, report, context, org'
fi
elif [ "$MODE" = "report" -o "$MODE" = "org" ] ; then
FLAGS="--no-show-diff $FLAGS"
fi
if [ "$ONLINE" = "0" ] ; then
echo ''
echo 'Please check for false positives in the output before submitting a patch.'
echo 'When using "patch" mode, carefully review the patch before submitting it.'
echo ''
fi
run_cmd_parmap() {
if [ $VERBOSE -ne 0 ] ; then
echo "Running ($NPROC in parallel): $@"
fi
echo $@ >>$DEBUG_FILE
$@ 2>>$DEBUG_FILE
if [[ $? -ne 0 ]]; then
echo "coccicheck failed"
exit $?
fi
}
run_cmd_old() {
local i
if [ $VERBOSE -ne 0 ] ; then
echo "Running ($NPROC in parallel): $@"
fi
for i in $(seq 0 $(( NPROC - 1)) ); do
eval "$@ --max $NPROC --index $i &"
SPATCH_PID[$i]=$!
if [ $VERBOSE -eq 2 ] ; then
echo "${SPATCH_PID[$i]} running"
fi
done
wait
}
run_cmd() {
if [ "$USE_JOBS" = "yes" ]; then
run_cmd_parmap $@
else
run_cmd_old $@
fi
}
kill_running() {
for i in $(seq 0 $(( NPROC - 1 )) ); do
if [ $VERBOSE -eq 2 ] ; then
echo "Killing ${SPATCH_PID[$i]}"
fi
kill ${SPATCH_PID[$i]} 2>/dev/null
done
}
# You can override heuristics with SPFLAGS, these must always go last
OPTIONS="$OPTIONS $SPFLAGS"
coccinelle () {
COCCI="$1"
OPT=`grep "Options:" $COCCI | cut -d':' -f2`
REQ=`grep "Requires:" $COCCI | cut -d':' -f2 | sed "s| ||"`
REQ_NUM=$(echo $REQ | ${DIR}/scripts/ld-version.sh)
if [ "$REQ_NUM" != "0" ] ; then
if [ "$SPATCH_VERSION_NUM" -lt "$REQ_NUM" ] ; then
echo "Skipping coccinelle SmPL patch: $COCCI"
echo "You have coccinelle: $SPATCH_VERSION"
echo "This SmPL patch requires: $REQ"
return
fi
fi
# The option '--parse-cocci' can be used to syntactically check the SmPL files.
#
# $SPATCH -D $MODE $FLAGS -parse_cocci $COCCI $OPT > /dev/null
if [ $VERBOSE -ne 0 -a $ONLINE -eq 0 ] ; then
FILE=${COCCI#$srctree/}
echo "Processing `basename $COCCI`"
echo "with option(s) \"$OPT\""
echo ''
echo 'Message example to submit a patch:'
sed -ne 's|^///||p' $COCCI
if [ "$MODE" = "patch" ] ; then
echo ' The semantic patch that makes this change is available'
elif [ "$MODE" = "report" ] ; then
echo ' The semantic patch that makes this report is available'
elif [ "$MODE" = "context" ] ; then
echo ' The semantic patch that spots this code is available'
elif [ "$MODE" = "org" ] ; then
echo ' The semantic patch that makes this Org report is available'
else
echo ' The semantic patch that makes this output is available'
fi
echo " in $FILE."
echo ''
echo ' More information about semantic patching is available at'
echo ' http://coccinelle.lip6.fr/'
echo ''
if [ "`sed -ne 's|^//#||p' $COCCI`" ] ; then
echo 'Semantic patch information:'
sed -ne 's|^//#||p' $COCCI
echo ''
fi
fi
if [ "$MODE" = "chain" ] ; then
run_cmd $SPATCH -D patch \
$FLAGS --cocci-file $COCCI $OPT $OPTIONS || \
run_cmd $SPATCH -D report \
$FLAGS --cocci-file $COCCI $OPT $OPTIONS --no-show-diff || \
run_cmd $SPATCH -D context \
$FLAGS --cocci-file $COCCI $OPT $OPTIONS || \
run_cmd $SPATCH -D org \
$FLAGS --cocci-file $COCCI $OPT $OPTIONS --no-show-diff || exit 1
elif [ "$MODE" = "rep+ctxt" ] ; then
run_cmd $SPATCH -D report \
$FLAGS --cocci-file $COCCI $OPT $OPTIONS --no-show-diff && \
run_cmd $SPATCH -D context \
$FLAGS --cocci-file $COCCI $OPT $OPTIONS || exit 1
else
run_cmd $SPATCH -D $MODE $FLAGS --cocci-file $COCCI $OPT $OPTIONS || exit 1
fi
}
if [ "$DEBUG_FILE" != "/dev/null" -a "$DEBUG_FILE" != "" ]; then
if [ -f $DEBUG_FILE ]; then
echo "Debug file $DEBUG_FILE exists, bailing"
exit
fi
else
DEBUG_FILE="/dev/null"
fi
if [ "$COCCI" = "" ] ; then
for f in `find $srctree/scripts/coccinelle/ -name '*.cocci' -type f | sort`; do
coccinelle $f
done
else
coccinelle $COCCI
fi
Computing file changes ...