92adeb6 | Linus Torvalds | 13 July 2019, 22:07:02 UTC | Merge tag 'for-linus-5.3' of git://github.com/cminyard/linux-ipmi Pull IPMI updates from Corey Minyard: "Some small fixes for various things, nothing huge, mostly found by automated tools. Plus add a driver that allows Linux to act as an IPMB slave device, so it can be a satellite MC in an IPMI network" * tag 'for-linus-5.3' of git://github.com/cminyard/linux-ipmi: docs: ipmb: place it at driver-api and convert to ReST fix platform_no_drv_owner.cocci warnings ipmi: ipmb: don't allocate i2c_client on stack ipmi: ipmb: Fix build error while CONFIG_I2C is set to m Add support for IPMB driver drivers: ipmi: Drop device reference ipmi_ssif: fix unexpected driver unregister warning ipmi_si: use bool type for initialized variable ipmi_si: fix unexpected driver unregister warning | 13 July 2019, 22:07:02 UTC |
43c95d3 | Linus Torvalds | 13 July 2019, 22:02:27 UTC | Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.3 kernel cycle: Core changes: - Device links can optionally be added between a pin control producer and its consumers. This will affect how the system power management is handled: a pin controller will not suspend before all of its consumers have been suspended. This was necessary for the ST Microelectronics STMFX expander and need to be tested on other systems as well: it makes sense to make this default in the long run. Right now it is opt-in per driver. - Drive strength can be specified in microamps. With decreases in silicon technology, milliamps isn't granular enough, let's make it possible to select drive strengths in microamps. Right now the Meson (AMlogic) driver needs this. New drivers: - New subdriver for the Tegra 194 SoC. - New subdriver for the Qualcomm SDM845. - New subdriver for the Qualcomm SM8150. - New subdriver for the Freescale i.MX8MN (Freescale is now a product line of NXP). - New subdriver for Marvell MV98DX1135. Driver improvements: - The Bitmain BM1880 driver now supports pin config in addition to muxing. - The Qualcomm drivers can now reserve some GPIOs as taken aside and not usable for users. This is used in ACPI systems to take out some GPIO lines used by the BIOS so that noone else (neither kernel nor userspace) will play with them by mistake and crash the machine. - A slew of refurbishing around the Aspeed drivers (board management controllers for servers) in preparation for the new Aspeed AST2600 SoC. - A slew of improvements over the SH PFC drivers as usual. - Misc cleanups and fixes" * tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits) pinctrl: aspeed: Strip moved macros and structs from private header pinctrl: aspeed: Fix missed include pinctrl: baytrail: Use GENMASK() consistently pinctrl: baytrail: Re-use data structures from pinctrl-intel.h pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux() pinctrl: qcom: Add SM8150 pinctrl driver dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding dt-bindings: pinctrl: qcom: Document missing gpio nodes pinctrl: aspeed: Add implementation-related documentation pinctrl: aspeed: Split out pinmux from general pinctrl pinctrl: aspeed: Clarify comment about strapping W1C pinctrl: aspeed: Correct comment that is no longer true MAINTAINERS: Add entry for ASPEED pinctrl drivers dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema dt-bindings: pinctrl: aspeed: Split bindings document in two pinctrl: qcom: Add irq_enable callback for msm gpio pinctrl: madera: Fixup SPDX headers pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard pinctrl: tegra: Add bitmask support for parked bits ... | 13 July 2019, 22:02:27 UTC |
073c916 | Linus Torvalds | 13 July 2019, 21:40:42 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - an update to Elan touchpad SMBus driver to fetch device parameters (size, resolution) while it is still in PS/2 mode, before switching over to SMBus, as in that mode some devices return garbage dimensions - update to iforce joystick driver - miscellaneous driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (48 commits) Input: gpio_keys_polled - allow specifying name of input device Input: edt-ft5x06 - simplify event reporting code Input: max77650-onkey - add MODULE_ALIAS() Input: atmel_mxt_ts - fix leak in mxt_update_cfg() Input: synaptics - enable SMBUS on T480 thinkpad trackpad Input: atmel_mxt_ts - fix -Wunused-const-variable Input: joydev - extend absolute mouse detection HID: quirks: Refactor ELAN 400 and 401 handling Input: elan_i2c - export the device id whitelist Input: edt-ft5x06 - use get_unaligned_be16() Input: iforce - add the Saitek R440 Force Wheel Input: iforce - use unaligned accessors, where appropriate Input: iforce - drop couple of temps from transport code Input: iforce - drop bus type from iforce structure Input: iforce - use DMA-safe buffores for USB transfers Input: iforce - allow callers supply data buffer when fetching device IDs Input: iforce - only call iforce_process_packet() if initialized Input: iforce - signal command completion from transport code Input: iforce - do not combine arguments for iforce_process_packet() Input: iforce - factor out hat handling when parsing packets ... | 13 July 2019, 21:40:42 UTC |
a2d79c7 | Linus Torvalds | 13 July 2019, 17:36:53 UTC | Merge tag 'for-5.3/io_uring-20190711' of git://git.kernel.dk/linux-block Pull io_uring updates from Jens Axboe: "This contains: - Support for recvmsg/sendmsg as first class opcodes. I don't envision going much further down this path, as there are plans in progress to support potentially any system call in an async fashion through io_uring. But I think it does make sense to have certain core ops available directly, especially those that can support a "try this non-blocking" flag/mode. (me) - Handle generic short reads automatically. This can happen fairly easily if parts of the buffered read is cached. Since the application needs to issue another request for the remainder, just do this internally and save kernel/user roundtrip while providing a nicer more robust API. (me) - Support for linked SQEs. This allows SQEs to depend on each other, enabling an application to eg queue a read-from-this-file,write-to-that-file pair. (me) - Fix race in stopping SQ thread (Jackie)" * tag 'for-5.3/io_uring-20190711' of git://git.kernel.dk/linux-block: io_uring: fix io_sq_thread_stop running in front of io_sq_thread io_uring: add support for recvmsg() io_uring: add support for sendmsg() io_uring: add support for sqe links io_uring: punt short reads to async context uio: make import_iovec()/compat_import_iovec() return bytes on success | 13 July 2019, 17:36:53 UTC |
964a4ea | Linus Torvalds | 13 July 2019, 00:37:53 UTC | Merge tag 'dlm-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: "This set removes some unnecessary debugfs error handling, and checks that lowcomms workqueues are not NULL before destroying" * tag 'dlm-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: no need to check return value of debugfs_create functions dlm: check if workqueues are NULL before flushing/destroying | 13 July 2019, 00:37:53 UTC |
23bbbf5 | Linus Torvalds | 13 July 2019, 00:31:19 UTC | Merge tag '9p-for-5.3' of git://github.com/martinetd/linux Pull 9p updates from Dominique Martinet: "Two small fixes to properly cleanup the 9p transports list if virtio/xen module initialization fail. 9p might otherwise try to access memory from a module that failed to register got freed" * tag '9p-for-5.3' of git://github.com/martinetd/linux: 9p/xen: Add cleanup path in p9_trans_xen_init 9p/virtio: Add cleanup path in p9_virtio_init | 13 July 2019, 00:31:19 UTC |
a641a88 | Linus Torvalds | 13 July 2019, 00:28:24 UTC | Merge tag 'f2fs-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've introduced native swap file support which can exploit DIO, enhanced existing checkpoint=disable feature with additional mount option to tune the triggering condition, and allowed user to preallocate physical blocks in a pinned file which will be useful to avoid f2fs fragmentation in append-only workloads. In addition, we've fixed subtle quota corruption issue. Enhancements: - add swap file support which uses DIO - allocate blocks for pinned file - allow SSR and mount option to enhance checkpoint=disable - enhance IPU IOs - add more sanity checks such as memory boundary access Bug fixes: - quota corruption in very corner case of error-injected SPO case - fix root_reserved on remount and some wrong counts - add missing fsck flag Some patches were also introduced to clean up ambiguous i_flags and debugging messages codes" * tag 'f2fs-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (33 commits) f2fs: improve print log in f2fs_sanity_check_ckpt() f2fs: avoid out-of-range memory access f2fs: fix to avoid long latency during umount f2fs: allow all the users to pin a file f2fs: support swap file w/ DIO f2fs: allocate blocks for pinned file f2fs: fix is_idle() check for discard type f2fs: add a rw_sem to cover quota flag changes f2fs: set SBI_NEED_FSCK for xattr corruption case f2fs: use generic EFSBADCRC/EFSCORRUPTED f2fs: Use DIV_ROUND_UP() instead of open-coding f2fs: print kernel message if filesystem is inconsistent f2fs: introduce f2fs_<level> macros to wrap f2fs_printk() f2fs: avoid get_valid_blocks() for cleanup f2fs: ioctl for removing a range from F2FS f2fs: only set project inherit bit for directory f2fs: separate f2fs i_flags from fs_flags and ext4 i_flags f2fs: replace ktype default_attrs with default_groups f2fs: Add option to limit required GC for checkpoint=disable f2fs: Fix accounting for unusable blocks ... | 13 July 2019, 00:28:24 UTC |
4ce9d18 | Linus Torvalds | 13 July 2019, 00:17:51 UTC | Merge tag 'xfs-5.3-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs updates from Darrick Wong: "In this release there are a significant amounts of consolidations and cleanups in the log code; restructuring of the log to issue struct bios directly; new bulkstat ioctls to return v5 fs inode information (and fix all the padding problems of the old ioctl); the beginnings of multithreaded inode walks (e.g. quotacheck); and a reduction in memory usage in the online scrub code leading to reduced runtimes. - Refactor inode geometry calculation into a single structure instead of open-coding pieces everywhere. - Add online repair to build options. - Remove unnecessary function call flags and functions. - Claim maintainership of various loose xfs documentation and header files. - Use struct bio directly for log buffer IOs instead of struct xfs_buf. - Reduce log item boilerplate code requirements. - Merge log item code spread across too many files. - Further distinguish between log item commits and cancellations. - Various small cleanups to the ag small allocator. - Support cgroup-aware writeback - libxfs refactoring for mkfs cleanup - Remove unneeded #includes - Fix a memory allocation miscalculation in the new log bio code - Fix bisection problems - Fix a crash in ioend processing caused by tripping over freeing of preallocated transactions - Split out a generic inode walk mechanism from the bulkstat code, hook up all the internal users to use the walking code, then clean up bulkstat to serve only the bulkstat ioctls. - Add a multithreaded iwalk implementation to speed up quotacheck on fast storage with many CPUs. - Remove unnecessary return values in logging teardown functions. - Supplement the bstat and inogrp structures with new bulkstat and inumbers structures that have all the fields we need for v5 filesystem features and none of the padding problems of their predecessors. - Wire up new ioctls that use the new structures with a much simpler bulk_ireq structure at the head instead of the pointerhappy mess we had before. - Enable userspace to constrain bulkstat returns to a single AG or a single special inode so that we can phase out a lot of geometry guesswork in userspace. - Reduce memory consumption and zeroing overhead in extended attribute scrub code. - Fix some behavioral regressions in the new bulkstat backend code. - Fix some behavioral regressions in the new log bio code" * tag 'xfs-5.3-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (100 commits) xfs: chain bios the right way around in xfs_rw_bdev xfs: bump INUMBERS cursor correctly in xfs_inumbers_walk xfs: don't update lastino for FSBULKSTAT_SINGLE xfs: online scrub needn't bother zeroing its temporary buffer xfs: only allocate memory for scrubbing attributes when we need it xfs: refactor attr scrub memory allocation function xfs: refactor extended attribute buffer pointer functions xfs: attribute scrub should use seen_enough to pass error values xfs: allow single bulkstat of special inodes xfs: specify AG in bulk req xfs: wire up the v5 inumbers ioctl xfs: wire up new v5 bulkstat ioctls xfs: introduce v5 inode group structure xfs: introduce new v5 bulkstat structure xfs: rename bulkstat functions xfs: remove various bulk request typedef usage fs: xfs: xfs_log: Change return type from int to void xfs: poll waiting for quotacheck xfs: multithreaded iwalk implementation xfs: refactor INUMBERS to use iwalk functions ... | 13 July 2019, 00:17:51 UTC |
5010fe9 | Linus Torvalds | 12 July 2019, 23:54:37 UTC | Merge tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull common SETFLAGS/FSSETXATTR parameter checking from Darrick Wong: "Here's a patch series that sets up common parameter checking functions for the FS_IOC_SETFLAGS and FS_IOC_FSSETXATTR ioctl implementations. The goal here is to reduce the amount of behaviorial variance between the filesystems where those ioctls originated (ext2 and XFS, respectively) and everybody else. - Standardize parameter checking for the SETFLAGS and FSSETXATTR ioctls (which were the file attribute setters for ext4 and xfs and have now been hoisted to the vfs) - Only allow the DAX flag to be set on files and directories" * tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: vfs: only allow FSSETXATTR to set DAX flag on files and dirs vfs: teach vfs_ioc_fssetxattr_check to check extent size hints vfs: teach vfs_ioc_fssetxattr_check to check project id info vfs: create a generic checking function for FS_IOC_FSSETXATTR vfs: create a generic checking and prep function for FS_IOC_SETFLAGS | 12 July 2019, 23:54:37 UTC |
8487d82 | Linus Torvalds | 12 July 2019, 23:08:21 UTC | Merge tag 'linux-kselftest-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: "This Kselftest update for Linux 5.3-rc1 consists of build failure fixes and minor code cleaning patch to remove duplicate headers" * tag 'linux-kselftest-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: rseq/selftests: Fix Thumb mode build failure on arm32 kselftests: cgroup: remove duplicated include from test_freezer.c selftests: timestamping: Fix SIOCGSTAMP undeclared build failure selftests: dma-buf: Adding kernel config fragment CONFIG_UDMABUF=y | 12 July 2019, 23:08:21 UTC |
106f146 | Linus Torvalds | 12 July 2019, 23:06:27 UTC | Merge tag 'kconfig-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - always require argument for --defconfig and remove the hard-coded arch/$(ARCH)/defconfig path - make arch/$(SRCARCH)/configs/defconfig the new default of defconfig - some code cleanups * tag 'kconfig-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove meaningless if-conditional in conf_read() kconfig: Fix spelling of sym_is_changable unicore32: rename unicore32_defconfig to defconfig kconfig: make arch/*/configs/defconfig the default of KBUILD_DEFCONFIG kconfig: add static qualifier to expand_string() kconfig: require the argument of --defconfig kconfig: remove always false ifeq ($(KBUILD_DEFCONFIG,) conditional | 12 July 2019, 23:06:27 UTC |
39ceda5 | Linus Torvalds | 12 July 2019, 23:03:16 UTC | Merge tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - remove headers_{install,check}_all targets - remove unreasonable 'depends on !UML' from CONFIG_SAMPLES - re-implement 'make headers_install' more cleanly - add new header-test-y syntax to compile-test headers - compile-test exported headers to ensure they are compilable in user-space - compile-test headers under include/ to ensure they are self-contained - remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value flags - add -Werror=unknown-warning-option for Clang - add 128-bit built-in types support to genksyms - fix missed rebuild of modules.builtin - propagate 'No space left on device' error in fixdep to Make - allow Clang to use its integrated assembler - improve some coccinelle scripts - add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute path for $(srctree). - do not ignore errors when compression utility is missing - misc cleanups * tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits) kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix kbuild: Inform user to pass ARCH= for make mrproper kbuild: fix compression errors getting ignored kbuild: add a flag to force absolute path for srctree kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree kbuild: remove src and obj from the top Makefile scripts/tags.sh: remove unused environment variables from comments scripts/tags.sh: drop SUBARCH support for ARM kbuild: compile-test kernel headers to ensure they are self-contained kheaders: include only headers into kheaders_data.tar.xz kheaders: remove meaningless -R option of 'ls' kbuild: support header-test-pattern-y kbuild: do not create wrappers for header-test-y kbuild: compile-test exported headers to ensure they are self-contained init/Kconfig: add CONFIG_CC_CAN_LINK kallsyms: exclude kasan local symbols on s390 kbuild: add more hints about SUBDIRS replacement coccinelle: api/stream_open: treat all wait_.*() calls as blocking coccinelle: put_device: Add a cast to an expression for an assignment coccinelle: put_device: Adjust a message construction ... | 12 July 2019, 23:03:16 UTC |
5f26f11 | Linus Torvalds | 12 July 2019, 22:41:33 UTC | Merge tag 'asm-generic-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "The asm-generic changes for 5.3 consist of a cleanup series to remove ptrace.h from Christoph Hellwig, who explains: 'asm-generic/ptrace.h is a little weird in that it doesn't actually implement any functionality, but it provided multiple layers of macros that just implement trivial inline functions. We implement those directly in the few architectures and be off with a much simpler design.' at https://lore.kernel.org/lkml/20190624054728.30966-1-hch@lst.de/" * tag 'asm-generic-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: remove ptrace.h x86: don't use asm-generic/ptrace.h sh: don't use asm-generic/ptrace.h powerpc: don't use asm-generic/ptrace.h arm64: don't use asm-generic/ptrace.h | 12 July 2019, 22:41:33 UTC |
aabfea8 | Linus Torvalds | 12 July 2019, 22:39:22 UTC | Merge tag 's390-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: - Fix integer overflow during stack frame unwind with invalid backchain. - Cleanup unused symbol export in zcrypt code. - Fix MIO addressing control activation in PCI code and expose its usage via sysfs. - Fix kernel image signature verification report presence detection. - Fix irq registration in vfio-ap code. - Add CPU measurement counters for newer machines. - Add base DASD thin provisioning support and code cleanups. * tag 's390-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (21 commits) s390/unwind: avoid int overflow in outside_of_stack s390/zcrypt: remove the exporting of ap_query_configuration s390/pci: add mio_enabled attribute s390: fix setting of mio addressing control s390/ipl: Fix detection of has_secure attribute s390: vfio-ap: fix irq registration s390/cpumf: Add extended counter set definitions for model 8561 and 8562 s390/dasd: Handle out-of-space constraint s390/dasd: Add discard support for ESE volumes s390/dasd: Use ALIGN_DOWN macro s390/dasd: Make dasd_setup_queue() a discipline function s390/dasd: Add new ioctl to release space s390/dasd: Add dasd_sleep_on_queue_interruptible() s390/dasd: Add missing intensity definition s390/dasd: Fix whitespace s390/dasd: Add dynamic formatting support for ESE volumes s390/dasd: Recognise data for ESE volumes s390/dasd: Put sub-order definitions in a separate section s390/dasd: Make layout analysis ESE compatible s390/dasd: Remove old defines and function ... | 12 July 2019, 22:39:22 UTC |
7181feb | Linus Torvalds | 12 July 2019, 22:38:05 UTC | Merge tag 'nios2-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull arch/nios2 updates from Ley Foon Tan. * tag 'nios2-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: configs: Remove useless UEVENT_HELPER_PATH nios2: remove pointless second entry for CONFIG_TRACE_IRQFLAGS_SUPPORT | 12 July 2019, 22:38:05 UTC |
39d7530 | Linus Torvalds | 12 July 2019, 22:35:14 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM updates from Paolo Bonzini: "ARM: - support for chained PMU counters in guests - improved SError handling - handle Neoverse N1 erratum #1349291 - allow side-channel mitigation status to be migrated - standardise most AArch64 system register accesses to msr_s/mrs_s - fix host MPIDR corruption on 32bit - selftests ckleanups x86: - PMU event {white,black}listing - ability for the guest to disable host-side interrupt polling - fixes for enlightened VMCS (Hyper-V pv nested virtualization), - new hypercall to yield to IPI target - support for passing cstate MSRs through to the guest - lots of cleanups and optimizations Generic: - Some txt->rST conversions for the documentation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (128 commits) Documentation: virtual: Add toctree hooks Documentation: kvm: Convert cpuid.txt to .rst Documentation: virtual: Convert paravirt_ops.txt to .rst KVM: x86: Unconditionally enable irqs in guest context KVM: x86: PMU Event Filter kvm: x86: Fix -Wmissing-prototypes warnings KVM: Properly check if "page" is valid in kvm_vcpu_unmap KVM: arm/arm64: Initialise host's MPIDRs by reading the actual register KVM: LAPIC: Retry tune per-vCPU timer_advance_ns if adaptive tuning goes insane kvm: LAPIC: write down valid APIC registers KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s KVM: doc: Add API documentation on the KVM_REG_ARM_WORKAROUNDS register KVM: arm/arm64: Add save/restore support for firmware workaround state arm64: KVM: Propagate full Spectre v2 workaround state to KVM guests KVM: arm/arm64: Support chained PMU counters KVM: arm/arm64: Remove pmc->bitmask KVM: arm/arm64: Re-create event when setting counter value KVM: arm/arm64: Extract duplicated code to own function KVM: arm/arm64: Rename kvm_pmu_{enable/disable}_counter functions KVM: LAPIC: ARBPRI is a reserved register for x2APIC ... | 12 July 2019, 22:35:14 UTC |
16c9765 | Linus Torvalds | 12 July 2019, 22:28:38 UTC | Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyper-v updates from Sasha Levin: - Add a module description to the Hyper-V vmbus module. - Rework some vmbus code to separate architecture specifics out to arch/x86/. This is part of the work of adding arm64 support to Hyper-V. * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Break out ISA independent parts of mshyperv.h drivers: hv: Add a module description line to the hv_vmbus driver | 12 July 2019, 22:28:38 UTC |
9e3a25d | Linus Torvalds | 12 July 2019, 22:13:55 UTC | Merge tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - move the USB special case that bounced DMA through a device bar into the USB code instead of handling it in the common DMA code (Laurentiu Tudor and Fredrik Noring) - don't dip into the global CMA pool for single page allocations (Nicolin Chen) - fix a crash when allocating memory for the atomic pool failed during boot (Florian Fainelli) - move support for MIPS-style uncached segments to the common code and use that for MIPS and nios2 (me) - make support for DMA_ATTR_NON_CONSISTENT and DMA_ATTR_NO_KERNEL_MAPPING generic (me) - convert nds32 to the generic remapping allocator (me) * tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping: (29 commits) dma-mapping: mark dma_alloc_need_uncached as __always_inline MIPS: only select ARCH_HAS_UNCACHED_SEGMENT for non-coherent platforms usb: host: Fix excessive alignment restriction for local memory allocations lib/genalloc.c: Add algorithm, align and zeroed family of DMA allocators nios2: use the generic uncached segment support in dma-direct nds32: use the generic remapping allocator for coherent DMA allocations arc: use the generic remapping allocator for coherent DMA allocations dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code dma-direct: handle DMA_ATTR_NON_CONSISTENT in common code dma-mapping: add a dma_alloc_need_uncached helper openrisc: remove the partial DMA_ATTR_NON_CONSISTENT support arc: remove the partial DMA_ATTR_NON_CONSISTENT support arm-nommu: remove the partial DMA_ATTR_NON_CONSISTENT support ARM: dma-mapping: allow larger DMA mask than supported dma-mapping: truncate dma masks to what dma_addr_t can hold iommu/dma: Apply dma_{alloc,free}_contiguous functions dma-remap: Avoid de-referencing NULL atomic_pool MIPS: use the generic uncached segment support in dma-direct dma-direct: provide generic support for uncached kernel segments au1100fb: fix DMA API abuse ... | 12 July 2019, 22:13:55 UTC |
9787aed | Nathan Chancellor | 01 July 2019, 18:28:08 UTC | coresight: Make the coresight_device_fwnode_match declaration's fwnode parameter const Fix Linus' merge error in the parent commit, causing: drivers/hwtracing/coresight/coresight.c:1051:11: error: incompatible pointer types passing 'int (struct device *, void *)' to parameter of type 'int (*)(struct device *, const void *)' [-Werror,-Wincompatible-pointer-types] coresight_device_fwnode_match); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/device.h:173:17: note: passing argument to parameter 'match' here int (*match)(struct device *dev, const void *data)); ^ due to missed header file fixup. Fixes: f632a8170a6b ("Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> [ Greg even sent this patch with his pull request, but I stupidly thought it was the merge resolution fix I had already done as part of the merge. But no, this was the extra fix for the header file that goes with the definition I _had_ caught - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 21:42:05 UTC |
f632a81 | Linus Torvalds | 12 July 2019, 19:24:03 UTC | Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ... | 12 July 2019, 19:24:03 UTC |
ef8f3d4 | Linus Torvalds | 12 July 2019, 18:40:28 UTC | Merge branch 'akpm' (patches from Andrew) Merge updates from Andrew Morton: "Am experimenting with splitting MM up into identifiable subsystems perhaps with a view to gitifying it in complex ways. Also with more verbose "incoming" emails. Most of MM is here and a few other trees. Subsystems affected by this patch series: - hotfixes - iommu - scripts - arch/sh - ocfs2 - mm:slab-generic - mm:slub - mm:kmemleak - mm:kasan - mm:cleanups - mm:debug - mm:pagecache - mm:swap - mm:memcg - mm:gup - mm:pagemap - mm:infrastructure - mm:vmalloc - mm:initialization - mm:pagealloc - mm:vmscan - mm:tools - mm:proc - mm:ras - mm:oom-kill hotfixes: mm: vmscan: scan anonymous pages on file refaults mm/nvdimm: add is_ioremap_addr and use that to check ioremap address mm/memcontrol: fix wrong statistics in memory.stat mm/z3fold.c: lock z3fold page before __SetPageMovable() nilfs2: do not use unexported cpu_to_le32()/le32_to_cpu() in uapi header MAINTAINERS: nilfs2: update email address iommu: include/linux/dmar.h: replace single-char identifiers in macros scripts: scripts/decode_stacktrace: match basepath using shell prefix operator, not regex scripts/decode_stacktrace: look for modules with .ko.debug extension scripts/spelling.txt: drop "sepc" from the misspelling list scripts/spelling.txt: add spelling fix for prohibited scripts/decode_stacktrace: Accept dash/underscore in modules scripts/spelling.txt: add more spellings to spelling.txt arch/sh: arch/sh/configs/sdk7786_defconfig: remove CONFIG_LOGFS sh: config: remove left-over BACKLIGHT_LCD_SUPPORT sh: prevent warnings when using iounmap ocfs2: fs: ocfs: fix spelling mistake "hearbeating" -> "heartbeat" ocfs2/dlm: use struct_size() helper ocfs2: add last unlock times in locking_state ocfs2: add locking filter debugfs file ocfs2: add first lock wait time in locking_state ocfs: no need to check return value of debugfs_create functions fs/ocfs2/dlmglue.c: unneeded variable: "status" ocfs2: use kmemdup rather than duplicating its implementation mm:slab-generic: Patch series "mm/slab: Improved sanity checking": mm/slab: validate cache membership under freelist hardening mm/slab: sanity-check page type when looking up cache lkdtm/heap: add tests for freelist hardening mm:slub: mm/slub.c: avoid double string traverse in kmem_cache_flags() slub: don't panic for memcg kmem cache creation failure mm:kmemleak: mm/kmemleak.c: fix check for softirq context mm/kmemleak.c: change error at _write when kmemleak is disabled docs: kmemleak: add more documentation details mm:kasan: mm/kasan: print frame description for stack bugs Patch series "Bitops instrumentation for KASAN", v5: lib/test_kasan: add bitops tests x86: use static_cpu_has in uaccess region to avoid instrumentation asm-generic, x86: add bitops instrumentation for KASAN Patch series "mm/kasan: Add object validation in ksize()", v3: mm/kasan: introduce __kasan_check_{read,write} mm/kasan: change kasan_check_{read,write} to return boolean lib/test_kasan: Add test for double-kzfree detection mm/slab: refactor common ksize KASAN logic into slab_common.c mm/kasan: add object validation in ksize() mm:cleanups: include/linux/pfn_t.h: remove pfn_t_to_virt() Patch series "remove ARCH_SELECT_MEMORY_MODEL where it has no effect": arm: remove ARCH_SELECT_MEMORY_MODEL s390: remove ARCH_SELECT_MEMORY_MODEL sparc: remove ARCH_SELECT_MEMORY_MODEL mm/gup.c: make follow_page_mask() static mm/memory.c: trivial clean up in insert_page() mm: make !CONFIG_HUGE_PAGE wrappers into static inlines include/linux/mm_types.h: ifdef struct vm_area_struct::swap_readahead_info mm: remove the account_page_dirtied export mm/page_isolation.c: change the prototype of undo_isolate_page_range() include/linux/vmpressure.h: use spinlock_t instead of struct spinlock mm: remove the exporting of totalram_pages include/linux/pagemap.h: document trylock_page() return value mm:debug: mm/failslab.c: by default, do not fail allocations with direct reclaim only Patch series "debug_pagealloc improvements": mm, debug_pagelloc: use static keys to enable debugging mm, page_alloc: more extensive free page checking with debug_pagealloc mm, debug_pagealloc: use a page type instead of page_ext flag mm:pagecache: Patch series "fix filler_t callback type mismatches", v2: mm/filemap.c: fix an overly long line in read_cache_page mm/filemap: don't cast ->readpage to filler_t for do_read_cache_page jffs2: pass the correct prototype to read_cache_page 9p: pass the correct prototype to read_cache_page mm/filemap.c: correct the comment about VM_FAULT_RETRY mm:swap: mm, swap: fix race between swapoff and some swap operations mm/swap_state.c: simplify total_swapcache_pages() with get_swap_device() mm, swap: use rbtree for swap_extent mm/mincore.c: fix race between swapoff and mincore mm:memcg: memcg, oom: no oom-kill for __GFP_RETRY_MAYFAIL memcg, fsnotify: no oom-kill for remote memcg charging mm, memcg: introduce memory.events.local mm: memcontrol: dump memory.stat during cgroup OOM Patch series "mm: reparent slab memory on cgroup removal", v7: mm: memcg/slab: postpone kmem_cache memcg pointer initialization to memcg_link_cache() mm: memcg/slab: rename slab delayed deactivation functions and fields mm: memcg/slab: generalize postponed non-root kmem_cache deactivation mm: memcg/slab: introduce __memcg_kmem_uncharge_memcg() mm: memcg/slab: unify SLAB and SLUB page accounting mm: memcg/slab: don't check the dying flag on kmem_cache creation mm: memcg/slab: synchronize access to kmem_cache dying flag using a spinlock mm: memcg/slab: rework non-root kmem_cache lifecycle management mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages mm: memcg/slab: reparent memcg kmem_caches on cgroup removal mm, memcg: add a memcg_slabinfo debugfs file mm:gup: Patch series "switch the remaining architectures to use generic GUP", v4: mm: use untagged_addr() for get_user_pages_fast addresses mm: simplify gup_fast_permitted mm: lift the x86_32 PAE version of gup_get_pte to common code MIPS: use the generic get_user_pages_fast code sh: add the missing pud_page definition sh: use the generic get_user_pages_fast code sparc64: add the missing pgd_page definition sparc64: define untagged_addr() sparc64: use the generic get_user_pages_fast code mm: rename CONFIG_HAVE_GENERIC_GUP to CONFIG_HAVE_FAST_GUP mm: reorder code blocks in gup.c mm: consolidate the get_user_pages* implementations mm: validate get_user_pages_fast flags mm: move the powerpc hugepd code to mm/gup.c mm: switch gup_hugepte to use try_get_compound_head mm: mark the page referenced in gup_hugepte mm/gup: speed up check_and_migrate_cma_pages() on huge page mm/gup.c: remove some BUG_ONs from get_gate_page() mm/gup.c: mark undo_dev_pagemap as __maybe_unused mm:pagemap: asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel] alpha: switch to generic version of pte allocation arm: switch to generic version of pte allocation arm64: switch to generic version of pte allocation csky: switch to generic version of pte allocation m68k: sun3: switch to generic version of pte allocation mips: switch to generic version of pte allocation nds32: switch to generic version of pte allocation nios2: switch to generic version of pte allocation parisc: switch to generic version of pte allocation riscv: switch to generic version of pte allocation um: switch to generic version of pte allocation unicore32: switch to generic version of pte allocation mm/pgtable: drop pgtable_t variable from pte_fn_t functions mm/memory.c: fail when offset == num in first check of __vm_map_pages() mm:infrastructure: mm/mmu_notifier: use hlist_add_head_rcu() mm:vmalloc: Patch series "Some cleanups for the KVA/vmalloc", v5: mm/vmalloc.c: remove "node" argument mm/vmalloc.c: preload a CPU with one object for split purpose mm/vmalloc.c: get rid of one single unlink_va() when merge mm/vmalloc.c: switch to WARN_ON() and move it under unlink_va() mm/vmalloc.c: spelling> s/informaion/information/ mm:initialization: mm/large system hash: use vmalloc for size > MAX_ORDER when !hashdist mm/large system hash: clear hashdist when only one node with memory is booted mm:pagealloc: arm64: move jump_label_init() before parse_early_param() Patch series "add init_on_alloc/init_on_free boot options", v10: mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options mm: init: report memory auto-initialization features at boot time mm:vmscan: mm: vmscan: remove double slab pressure by inc'ing sc->nr_scanned mm: vmscan: correct some vmscan counters for THP swapout mm:tools: tools/vm/slabinfo: order command line options tools/vm/slabinfo: add partial slab listing to -X tools/vm/slabinfo: add option to sort by partial slabs tools/vm/slabinfo: add sorting info to help menu mm:proc: proc: use down_read_killable mmap_sem for /proc/pid/maps proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup proc: use down_read_killable mmap_sem for /proc/pid/pagemap proc: use down_read_killable mmap_sem for /proc/pid/clear_refs proc: use down_read_killable mmap_sem for /proc/pid/map_files mm: use down_read_killable for locking mmap_sem in access_remote_vm mm: smaps: split PSS into components mm: vmalloc: show number of vmalloc pages in /proc/meminfo mm:ras: mm/memory-failure.c: clarify error message mm:oom-kill: mm: memcontrol: use CSS_TASK_ITER_PROCS at mem_cgroup_scan_tasks() mm, oom: refactor dump_tasks for memcg OOMs mm, oom: remove redundant task_in_mem_cgroup() check oom: decouple mems_allowed from oom_unkillable_task mm/oom_kill.c: remove redundant OOM score normalization in select_bad_process()" * akpm: (147 commits) mm/oom_kill.c: remove redundant OOM score normalization in select_bad_process() oom: decouple mems_allowed from oom_unkillable_task mm, oom: remove redundant task_in_mem_cgroup() check mm, oom: refactor dump_tasks for memcg OOMs mm: memcontrol: use CSS_TASK_ITER_PROCS at mem_cgroup_scan_tasks() mm/memory-failure.c: clarify error message mm: vmalloc: show number of vmalloc pages in /proc/meminfo mm: smaps: split PSS into components mm: use down_read_killable for locking mmap_sem in access_remote_vm proc: use down_read_killable mmap_sem for /proc/pid/map_files proc: use down_read_killable mmap_sem for /proc/pid/clear_refs proc: use down_read_killable mmap_sem for /proc/pid/pagemap proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup proc: use down_read_killable mmap_sem for /proc/pid/maps tools/vm/slabinfo: add sorting info to help menu tools/vm/slabinfo: add option to sort by partial slabs tools/vm/slabinfo: add partial slab listing to -X tools/vm/slabinfo: order command line options mm: vmscan: correct some vmscan counters for THP swapout mm: vmscan: remove double slab pressure by inc'ing sc->nr_scanned ... | 12 July 2019, 18:40:28 UTC |
2c20798 | Tetsuo Handa | 12 July 2019, 04:00:34 UTC | mm/oom_kill.c: remove redundant OOM score normalization in select_bad_process() Since commit bbbe48029720 ("mm, oom: remove 'prefer children over parent' heuristic") removed the "%s: Kill process %d (%s) score %u or sacrifice child\n" line, oc->chosen_points is no longer used after select_bad_process(). Link: http://lkml.kernel.org/r/1560853435-15575-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:47 UTC |
ac311a1 | Shakeel Butt | 12 July 2019, 04:00:31 UTC | oom: decouple mems_allowed from oom_unkillable_task Commit ef08e3b4981a ("[PATCH] cpusets: confine oom_killer to mem_exclusive cpuset") introduces a heuristic where a potential oom-killer victim is skipped if the intersection of the potential victim and the current (the process triggered the oom) is empty based on the reason that killing such victim most probably will not help the current allocating process. However the commit 7887a3da753e ("[PATCH] oom: cpuset hint") changed the heuristic to just decrease the oom_badness scores of such potential victim based on the reason that the cpuset of such processes might have changed and previously they may have allocated memory on mems where the current allocating process can allocate from. Unintentionally 7887a3da753e ("[PATCH] oom: cpuset hint") introduced a side effect as the oom_badness is also exposed to the user space through /proc/[pid]/oom_score, so, readers with different cpusets can read different oom_score of the same process. Later, commit 6cf86ac6f36b ("oom: filter tasks not sharing the same cpuset") fixed the side effect introduced by 7887a3da753e by moving the cpuset intersection back to only oom-killer context and out of oom_badness. However the combination of ab290adbaf8f ("oom: make oom_unkillable_task() helper function") and 26ebc984913b ("oom: /proc/<pid>/oom_score treat kernel thread honestly") unintentionally brought back the cpuset intersection check into the oom_badness calculation function. Other than doing cpuset/mempolicy intersection from oom_badness, the memcg oom context is also doing cpuset/mempolicy intersection which is quite wrong and is caught by syzcaller with the following report: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 28426 Comm: syz-executor.5 Not tainted 5.2.0-rc3-next-20190607 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:194 [inline] RIP: 0010:has_intersects_mems_allowed mm/oom_kill.c:84 [inline] RIP: 0010:oom_unkillable_task mm/oom_kill.c:168 [inline] RIP: 0010:oom_unkillable_task+0x180/0x400 mm/oom_kill.c:155 Code: c1 ea 03 80 3c 02 00 0f 85 80 02 00 00 4c 8b a3 10 07 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8d 74 24 10 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 67 02 00 00 49 8b 44 24 10 4c 8d a0 68 fa ff ff RSP: 0018:ffff888000127490 EFLAGS: 00010a03 RAX: dffffc0000000000 RBX: ffff8880a4cd5438 RCX: ffffffff818dae9c RDX: 100000000c3cc602 RSI: ffffffff818dac8d RDI: 0000000000000001 RBP: ffff8880001274d0 R08: ffff888000086180 R09: ffffed1015d26be0 R10: ffffed1015d26bdf R11: ffff8880ae935efb R12: 8000000061e63007 R13: 0000000000000000 R14: 8000000061e63017 R15: 1ffff11000024ea6 FS: 00005555561f5940(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000607304 CR3: 000000009237e000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: oom_evaluate_task+0x49/0x520 mm/oom_kill.c:321 mem_cgroup_scan_tasks+0xcc/0x180 mm/memcontrol.c:1169 select_bad_process mm/oom_kill.c:374 [inline] out_of_memory mm/oom_kill.c:1088 [inline] out_of_memory+0x6b2/0x1280 mm/oom_kill.c:1035 mem_cgroup_out_of_memory+0x1ca/0x230 mm/memcontrol.c:1573 mem_cgroup_oom mm/memcontrol.c:1905 [inline] try_charge+0xfbe/0x1480 mm/memcontrol.c:2468 mem_cgroup_try_charge+0x24d/0x5e0 mm/memcontrol.c:6073 mem_cgroup_try_charge_delay+0x1f/0xa0 mm/memcontrol.c:6088 do_huge_pmd_wp_page_fallback+0x24f/0x1680 mm/huge_memory.c:1201 do_huge_pmd_wp_page+0x7fc/0x2160 mm/huge_memory.c:1359 wp_huge_pmd mm/memory.c:3793 [inline] __handle_mm_fault+0x164c/0x3eb0 mm/memory.c:4006 handle_mm_fault+0x3b7/0xa90 mm/memory.c:4053 do_user_addr_fault arch/x86/mm/fault.c:1455 [inline] __do_page_fault+0x5ef/0xda0 arch/x86/mm/fault.c:1521 do_page_fault+0x71/0x57d arch/x86/mm/fault.c:1552 page_fault+0x1e/0x30 arch/x86/entry/entry_64.S:1156 RIP: 0033:0x400590 Code: 06 e9 49 01 00 00 48 8b 44 24 10 48 0b 44 24 28 75 1f 48 8b 14 24 48 8b 7c 24 20 be 04 00 00 00 e8 f5 56 00 00 48 8b 74 24 08 <89> 06 e9 1e 01 00 00 48 8b 44 24 08 48 8b 14 24 be 04 00 00 00 8b RSP: 002b:00007fff7bc49780 EFLAGS: 00010206 RAX: 0000000000000001 RBX: 0000000000760000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000002000cffc RDI: 0000000000000001 RBP: fffffffffffffffe R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000075 R11: 0000000000000246 R12: 0000000000760008 R13: 00000000004c55f2 R14: 0000000000000000 R15: 00007fff7bc499b0 Modules linked in: ---[ end trace a65689219582ffff ]--- RIP: 0010:__read_once_size include/linux/compiler.h:194 [inline] RIP: 0010:has_intersects_mems_allowed mm/oom_kill.c:84 [inline] RIP: 0010:oom_unkillable_task mm/oom_kill.c:168 [inline] RIP: 0010:oom_unkillable_task+0x180/0x400 mm/oom_kill.c:155 Code: c1 ea 03 80 3c 02 00 0f 85 80 02 00 00 4c 8b a3 10 07 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8d 74 24 10 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 67 02 00 00 49 8b 44 24 10 4c 8d a0 68 fa ff ff RSP: 0018:ffff888000127490 EFLAGS: 00010a03 RAX: dffffc0000000000 RBX: ffff8880a4cd5438 RCX: ffffffff818dae9c RDX: 100000000c3cc602 RSI: ffffffff818dac8d RDI: 0000000000000001 RBP: ffff8880001274d0 R08: ffff888000086180 R09: ffffed1015d26be0 R10: ffffed1015d26bdf R11: ffff8880ae935efb R12: 8000000061e63007 R13: 0000000000000000 R14: 8000000061e63017 R15: 1ffff11000024ea6 FS: 00005555561f5940(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2f823000 CR3: 000000009237e000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 The fix is to decouple the cpuset/mempolicy intersection check from oom_unkillable_task() and make sure cpuset/mempolicy intersection check is only done in the global oom context. [shakeelb@google.com: change function name and update comment] Link: http://lkml.kernel.org/r/20190628152421.198994-3-shakeelb@google.com Link: http://lkml.kernel.org/r/20190624212631.87212-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Reported-by: syzbot+d0fc9d3c166bc5e4a94b@syzkaller.appspotmail.com Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Paul Jackson <pj@sgi.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:47 UTC |
6ba749e | Shakeel Butt | 12 July 2019, 04:00:26 UTC | mm, oom: remove redundant task_in_mem_cgroup() check oom_unkillable_task() can be called from three different contexts i.e. global OOM, memcg OOM and oom_score procfs interface. At the moment oom_unkillable_task() does a task_in_mem_cgroup() check on the given process. Since there is no reason to perform task_in_mem_cgroup() check for global OOM and oom_score procfs interface, those contexts provide NULL memcg and skips the task_in_mem_cgroup() check. However for memcg OOM context, the oom_unkillable_task() is always called from mem_cgroup_scan_tasks() and thus task_in_mem_cgroup() check becomes redundant and effectively dead code. So, just remove the task_in_mem_cgroup() check altogether. Link: http://lkml.kernel.org/r/20190624212631.87212-2-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Paul Jackson <pj@sgi.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:47 UTC |
5eee7e1 | Shakeel Butt | 12 July 2019, 04:00:23 UTC | mm, oom: refactor dump_tasks for memcg OOMs dump_tasks() traverses all the existing processes even for the memcg OOM context which is not only unnecessary but also wasteful. This imposes a long RCU critical section even from a contained context which can be quite disruptive. Change dump_tasks() to be aligned with select_bad_process and use mem_cgroup_scan_tasks to selectively traverse only processes of the target memcg hierarchy during memcg OOM. Link: http://lkml.kernel.org/r/20190617231207.160865-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Jackson <pj@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:47 UTC |
f168a9a | Tetsuo Handa | 12 July 2019, 04:00:20 UTC | mm: memcontrol: use CSS_TASK_ITER_PROCS at mem_cgroup_scan_tasks() Since commit c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations") corrected how CSS_TASK_ITER_PROCS works, mem_cgroup_scan_tasks() can use CSS_TASK_ITER_PROCS in order to check only one thread from each thread group. [penguin-kernel@I-love.SAKURA.ne.jp: remove thread group leader check in oom_evaluate_task()] Link: http://lkml.kernel.org/r/1560853257-14934-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Link: http://lkml.kernel.org/r/c763afc8-f0ae-756a-56a7-395f625b95fc@i-love.sakura.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:47 UTC |
135e535 | Jane Chu | 12 July 2019, 04:00:17 UTC | mm/memory-failure.c: clarify error message Some user who install SIGBUS handler that does longjmp out therefore keeping the process alive is confused by the error message "[188988.765862] Memory failure: 0x1840200: Killing cellsrv:33395 due to hardware memory corruption" Slightly modify the error message to improve clarity. Link: http://lkml.kernel.org/r/1558403523-22079-1-git-send-email-jane.chu@oracle.com Signed-off-by: Jane Chu <jane.chu@oracle.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:47 UTC |
97105f0 | Roman Gushchin | 12 July 2019, 04:00:13 UTC | mm: vmalloc: show number of vmalloc pages in /proc/meminfo Vmalloc() is getting more and more used these days (kernel stacks, bpf and percpu allocator are new top users), and the total % of memory consumed by vmalloc() can be pretty significant and changes dynamically. /proc/meminfo is the best place to display this information: its top goal is to show top consumers of the memory. Since the VmallocUsed field in /proc/meminfo is not in use for quite a long time (it has been defined to 0 by a5ad88ce8c7f ("mm: get rid of 'vmalloc_info' from /proc/meminfo")), let's reuse it for showing the actual physical memory consumption of vmalloc(). Link: http://lkml.kernel.org/r/20190417194002.12369-3-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:47 UTC |
ee2ad71 | Luigi Semenzato | 12 July 2019, 04:00:10 UTC | mm: smaps: split PSS into components Report separate components (anon, file, and shmem) for PSS in smaps_rollup. This helps understand and tune the memory manager behavior in consumer devices, particularly mobile devices. Many of them (e.g. chromebooks and Android-based devices) use zram for anon memory, and perform disk reads for discarded file pages. The difference in latency is large (e.g. reading a single page from SSD is 30 times slower than decompressing a zram page on one popular device), thus it is useful to know how much of the PSS is anon vs. file. All the information is already present in /proc/pid/smaps, but much more expensive to obtain because of the large size of that procfs entry. This patch also removes a small code duplication in smaps_account, which would have gotten worse otherwise. Also updated Documentation/filesystems/proc.txt (the smaps section was a bit stale, and I added a smaps_rollup section) and Documentation/ABI/testing/procfs-smaps_rollup. [semenzato@chromium.org: v5] Link: http://lkml.kernel.org/r/20190626234333.44608-1-semenzato@chromium.org Link: http://lkml.kernel.org/r/20190626180429.174569-1-semenzato@chromium.org Signed-off-by: Luigi Semenzato <semenzato@chromium.org> Acked-by: Yu Zhao <yuzhao@chromium.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Yu Zhao <yuzhao@chromium.org> Cc: Brian Geffon <bgeffon@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:47 UTC |
1e426fe | Konstantin Khlebnikov | 12 July 2019, 04:00:07 UTC | mm: use down_read_killable for locking mmap_sem in access_remote_vm This function is used by ptrace and proc files like /proc/pid/cmdline and /proc/pid/environ. Access_remote_vm never returns error codes, all errors are ignored and only size of successfully read data is returned. So, if current task was killed we'll simply return 0 (bytes read). Mmap_sem could be locked for a long time or forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. Link: http://lkml.kernel.org/r/156007494202.3335.16782303099589302087.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Michal Koutný <mkoutny@suse.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:47 UTC |
cd9e2bb | Konstantin Khlebnikov | 12 July 2019, 04:00:03 UTC | proc: use down_read_killable mmap_sem for /proc/pid/map_files Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. It seems ->d_revalidate() could return any error (except ECHILD) to abort validation and pass error as result of lookup sequence. [akpm@linux-foundation.org: fix proc_map_files_lookup() return value, per Andrei] Link: http://lkml.kernel.org/r/156007493995.3335.9595044802115356911.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Roman Gushchin <guro@fb.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:47 UTC |
c460380 | Konstantin Khlebnikov | 12 July 2019, 04:00:00 UTC | proc: use down_read_killable mmap_sem for /proc/pid/clear_refs Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. Replace the only unkillable mmap_sem lock in clear_refs_write(). Link: http://lkml.kernel.org/r/156007493826.3335.5424884725467456239.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Roman Gushchin <guro@fb.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:47 UTC |
ad80b93 | Konstantin Khlebnikov | 12 July 2019, 03:59:56 UTC | proc: use down_read_killable mmap_sem for /proc/pid/pagemap Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. Link: http://lkml.kernel.org/r/156007493638.3335.4872164955523928492.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Roman Gushchin <guro@fb.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:47 UTC |
a26a978 | Konstantin Khlebnikov | 12 July 2019, 03:59:53 UTC | proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. Link: http://lkml.kernel.org/r/156007493429.3335.14666825072272692455.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Roman Gushchin <guro@fb.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:47 UTC |
8a713e7 | Konstantin Khlebnikov | 12 July 2019, 03:59:50 UTC | proc: use down_read_killable mmap_sem for /proc/pid/maps Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. This function is also used for /proc/pid/smaps. Link: http://lkml.kernel.org/r/156007493160.3335.14447544314127417266.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Roman Gushchin <guro@fb.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
cbf800d | Tobin C. Harding | 12 July 2019, 03:59:46 UTC | tools/vm/slabinfo: add sorting info to help menu Passing more than one sorting option has undefined behaviour. Add an explicit statement as such to the help menu, this also has the advantage of highlighting all the sorting options. Link: http://lkml.kernel.org/r/20190426022622.4089-5-tobin@kernel.org Signed-off-by: Tobin C. Harding <tobin@kernel.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com>, Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@iki.fi> Cc: Qian Cai <cai@lca.pw> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
53a83f9 | Tobin C. Harding | 12 July 2019, 03:59:42 UTC | tools/vm/slabinfo: add option to sort by partial slabs We would like to get a better view of the level of fragmentation within the SLUB allocator. Total number of partial slabs is an indicator of fragmentation. Add a command line option (-P | --partial) to sort the slab list by total number of partial slabs. Link: http://lkml.kernel.org/r/20190426022622.4089-4-tobin@kernel.org Signed-off-by: Tobin C. Harding <tobin@kernel.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com>, Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@iki.fi> Cc: Qian Cai <cai@lca.pw> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
1106b20 | Tobin C. Harding | 12 July 2019, 03:59:38 UTC | tools/vm/slabinfo: add partial slab listing to -X We would like to see how fragmented the SLUB allocator is, one window into fragmentation is the total number of partial slabs. Currently `slabinfo -X` shows slabs sorted by loss and by size. We can use this option to also show slabs sorted by number of partial slabs. Option '-X' can be used in conjunction with '-N' to control the number of slabs shown e.g. list of top 5 slabs: slabinfo -X -N5 Add list of slabs ordered by number of partial slabs to output of `slabinfo -X`. Link: http://lkml.kernel.org/r/20190426022622.4089-3-tobin@kernel.org Signed-off-by: Tobin C. Harding <tobin@kernel.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com>, Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@iki.fi> Cc: Qian Cai <cai@lca.pw> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
d914999 | Tobin C. Harding | 12 July 2019, 03:59:34 UTC | tools/vm/slabinfo: order command line options During recent discussion on LKML over SLAB vs SLUB it was suggested by Jesper that it would be nice to have a tool to view the current fragmentation of the slab allocators. CC list for this set is taken from that thread. For SLUB we have all the information for this already exposed by the kernel and also we have a userspace tool for displaying this info: tools/vm/slabinfo.c Extend slabinfo to improve the fragmentation information by enabling sorting of caches by number of partial slabs. Also add cache list sorted in this manner to the output of `slabinfo -X`. This patch (of 4): get_opt() has a spurious character within the option string. Remove it and reorder the options in alphabetic order so that it is easier to keep the options correct. Use the same ordering for command help output and long option handling code. Link: http://lkml.kernel.org/r/20190426022622.4089-2-tobin@kernel.org Signed-off-by: Tobin C. Harding <tobin@kernel.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pekka Enberg <penberg@iki.fi> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Cc: Qian Cai <cai@lca.pw> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com>, Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
98879b3 | Yang Shi | 12 July 2019, 03:59:30 UTC | mm: vmscan: correct some vmscan counters for THP swapout Commit bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped out"), THP can be swapped out in a whole. But, nr_reclaimed and some other vm counters still get inc'ed by one even though a whole THP (512 pages) gets swapped out. This doesn't make too much sense to memory reclaim. For example, direct reclaim may just need reclaim SWAP_CLUSTER_MAX pages, reclaiming one THP could fulfill it. But, if nr_reclaimed is not increased correctly, direct reclaim may just waste time to reclaim more pages, SWAP_CLUSTER_MAX * 512 pages in worst case. And, it may cause pgsteal_{kswapd|direct} is greater than pgscan_{kswapd|direct}, like the below: pgsteal_kswapd 122933 pgsteal_direct 26600225 pgscan_kswapd 174153 pgscan_direct 14678312 nr_reclaimed and nr_scanned must be fixed in parallel otherwise it would break some page reclaim logic, e.g. vmpressure: this looks at the scanned/reclaimed ratio so it won't change semantics as long as scanned & reclaimed are fixed in parallel. compaction/reclaim: compaction wants a certain number of physical pages freed up before going back to compacting. kswapd priority raising: kswapd raises priority if we scan fewer pages than the reclaim target (which itself is obviously expressed in order-0 pages). As a result, kswapd can falsely raise its aggressiveness even when it's making great progress. Other than nr_scanned and nr_reclaimed, some other counters, e.g. pgactivate, nr_skipped, nr_ref_keep and nr_unmap_fail need to be fixed too since they are user visible via cgroup, /proc/vmstat or trace points, otherwise they would be underreported. When isolating pages from LRUs, nr_taken has been accounted in base page, but nr_scanned and nr_skipped are still accounted in THP. It doesn't make too much sense too since this may cause trace point underreport the numbers as well. So accounting those counters in base page instead of accounting THP as one page. nr_dirty, nr_unqueued_dirty, nr_congested and nr_writeback are used by file cache, so they are not impacted by THP swap. This change may result in lower steal/scan ratio in some cases since THP may get split during page reclaim, then a part of tail pages get reclaimed instead of the whole 512 pages, but nr_scanned is accounted by 512, particularly for direct reclaim. But, this should be not a significant issue. Link: http://lkml.kernel.org/r/1559025859-72759-2-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
af5d440 | Yang Shi | 12 July 2019, 03:59:27 UTC | mm: vmscan: remove double slab pressure by inc'ing sc->nr_scanned Commit 9092c71bb724 ("mm: use sc->priority for slab shrink targets") has broken up the relationship between sc->nr_scanned and slab pressure. The sc->nr_scanned can't double slab pressure anymore. So, it sounds no sense to still keep sc->nr_scanned inc'ed. Actually, it would prevent from adding pressure on slab shrink since excessive sc->nr_scanned would prevent from scan->priority raise. The bonnie test doesn't show this would change the behavior of slab shrinkers. w/ w/o /sec %CP /sec %CP Sequential delete: 3960.6 94.6 3997.6 96.2 Random delete: 2518 63.8 2561.6 64.6 The slight increase of "/sec" without the patch would be caused by the slight increase of CPU usage. Link: http://lkml.kernel.org/r/1559025859-72759-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Hillf Danton <hdanton@sina.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
23a5c8c | Alexander Potapenko | 12 July 2019, 03:59:23 UTC | mm: init: report memory auto-initialization features at boot time Print the currently enabled stack and heap initialization modes. Stack initialization is enabled by a config flag, while heap initialization is configured at boot time with defaults being set in the config. It's more convenient for the user to have all information about these hardening measures in one place at boot, so the user can reason about the expected behavior of the running system. The possible options for stack are: - "all" for CONFIG_INIT_STACK_ALL; - "byref_all" for CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL; - "byref" for CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF; - "__user" for CONFIG_GCC_PLUGIN_STRUCTLEAK_USER; - "off" otherwise. Depending on the values of init_on_alloc and init_on_free boottime options we also report "heap alloc" and "heap free" as "on"/"off". In the init_on_free mode initializing pages at boot time may take a while, so print a notice about that as well. This depends on how much memory is installed, the memory bandwidth, etc. On a relatively modern x86 system, it takes about 0.75s/GB to wipe all memory: [ 0.418722] mem auto-init: stack:byref_all, heap alloc:off, heap free:on [ 0.419765] mem auto-init: clearing system memory may take some time... [ 12.376605] Memory: 16408564K/16776672K available (14339K kernel code, 1397K rwdata, 3756K rodata, 1636K init, 11460K bss, 368108K reserved, 0K cma-reserved) Link: http://lkml.kernel.org/r/20190617151050.92663-3-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Suggested-by: Kees Cook <keescook@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Christoph Lameter <cl@linux.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: James Morris <jmorris@namei.org> Cc: Jann Horn <jannh@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Sandeep Patil <sspatil@android.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Marco Elver <elver@google.com> Cc: Kaiwan N Billimoria <kaiwan@kaiwantech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
6471384 | Alexander Potapenko | 12 July 2019, 03:59:19 UTC | mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options Patch series "add init_on_alloc/init_on_free boot options", v10. Provide init_on_alloc and init_on_free boot options. These are aimed at preventing possible information leaks and making the control-flow bugs that depend on uninitialized values more deterministic. Enabling either of the options guarantees that the memory returned by the page allocator and SL[AU]B is initialized with zeroes. SLOB allocator isn't supported at the moment, as its emulation of kmem caches complicates handling of SLAB_TYPESAFE_BY_RCU caches correctly. Enabling init_on_free also guarantees that pages and heap objects are initialized right after they're freed, so it won't be possible to access stale data by using a dangling pointer. As suggested by Michal Hocko, right now we don't let the heap users to disable initialization for certain allocations. There's not enough evidence that doing so can speed up real-life cases, and introducing ways to opt-out may result in things going out of control. This patch (of 2): The new options are needed to prevent possible information leaks and make control-flow bugs that depend on uninitialized values more deterministic. This is expected to be on-by-default on Android and Chrome OS. And it gives the opportunity for anyone else to use it under distros too via the boot args. (The init_on_free feature is regularly requested by folks where memory forensics is included in their threat models.) init_on_alloc=1 makes the kernel initialize newly allocated pages and heap objects with zeroes. Initialization is done at allocation time at the places where checks for __GFP_ZERO are performed. init_on_free=1 makes the kernel initialize freed pages and heap objects with zeroes upon their deletion. This helps to ensure sensitive data doesn't leak via use-after-free accesses. Both init_on_alloc=1 and init_on_free=1 guarantee that the allocator returns zeroed memory. The two exceptions are slab caches with constructors and SLAB_TYPESAFE_BY_RCU flag. Those are never zero-initialized to preserve their semantics. Both init_on_alloc and init_on_free default to zero, but those defaults can be overridden with CONFIG_INIT_ON_ALLOC_DEFAULT_ON and CONFIG_INIT_ON_FREE_DEFAULT_ON. If either SLUB poisoning or page poisoning is enabled, those options take precedence over init_on_alloc and init_on_free: initialization is only applied to unpoisoned allocations. Slowdown for the new features compared to init_on_free=0, init_on_alloc=0: hackbench, init_on_free=1: +7.62% sys time (st.err 0.74%) hackbench, init_on_alloc=1: +7.75% sys time (st.err 2.14%) Linux build with -j12, init_on_free=1: +8.38% wall time (st.err 0.39%) Linux build with -j12, init_on_free=1: +24.42% sys time (st.err 0.52%) Linux build with -j12, init_on_alloc=1: -0.13% wall time (st.err 0.42%) Linux build with -j12, init_on_alloc=1: +0.57% sys time (st.err 0.40%) The slowdown for init_on_free=0, init_on_alloc=0 compared to the baseline is within the standard error. The new features are also going to pave the way for hardware memory tagging (e.g. arm64's MTE), which will require both on_alloc and on_free hooks to set the tags for heap objects. With MTE, tagging will have the same cost as memory initialization. Although init_on_free is rather costly, there are paranoid use-cases where in-memory data lifetime is desired to be minimized. There are various arguments for/against the realism of the associated threat models, but given that we'll need the infrastructure for MTE anyway, and there are people who want wipe-on-free behavior no matter what the performance cost, it seems reasonable to include it in this series. [glider@google.com: v8] Link: http://lkml.kernel.org/r/20190626121943.131390-2-glider@google.com [glider@google.com: v9] Link: http://lkml.kernel.org/r/20190627130316.254309-2-glider@google.com [glider@google.com: v10] Link: http://lkml.kernel.org/r/20190628093131.199499-2-glider@google.com Link: http://lkml.kernel.org/r/20190617151050.92663-2-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Michal Hocko <mhocko@suse.cz> [page and dmapool parts Acked-by: James Morris <jamorris@linux.microsoft.com>] Cc: Christoph Lameter <cl@linux.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Sandeep Patil <sspatil@android.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
ba5c5e4 | Kees Cook | 12 July 2019, 03:59:15 UTC | arm64: move jump_label_init() before parse_early_param() While jump_label_init() was moved earlier in the boot process in efd9e03facd0 ("arm64: Use static keys for CPU features"), it wasn't early enough for early params to use it. The old state of things was as described here... init/main.c calls out to arch-specific things before general jump label and early param handling: asmlinkage __visible void __init start_kernel(void) { ... setup_arch(&command_line); ... smp_prepare_boot_cpu(); ... /* parameters may set static keys */ jump_label_init(); parse_early_param(); ... } x86 setup_arch() wants those earlier, so it handles jump label and early param: void __init setup_arch(char **cmdline_p) { ... jump_label_init(); ... parse_early_param(); ... } arm64 setup_arch() only had early param: void __init setup_arch(char **cmdline_p) { ... parse_early_param(); ... } with jump label later in smp_prepare_boot_cpu(): void __init smp_prepare_boot_cpu(void) { ... jump_label_init(); ... } This moves arm64 jump_label_init() from smp_prepare_boot_cpu() to setup_arch(), as done already on x86, in preparation from early param usage in the init_on_alloc/free() series: https://lkml.kernel.org/r/1561572949.5154.81.camel@lca.pw Link: http://lkml.kernel.org/r/201906271003.005303B52@keescook Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Qian Cai <cai@lca.pw> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
e03a512 | Nicholas Piggin | 12 July 2019, 03:59:12 UTC | mm/large system hash: clear hashdist when only one node with memory is booted CONFIG_NUMA on 64-bit CPUs currently enables hashdist unconditionally even when booting on single node machines. This causes the large system hashes to be allocated with vmalloc, and mapped with small pages. This change clears hashdist if only one node has come up with memory. This results in the important large inode and dentry hashes using memblock allocations. All others are within 4MB size up to about 128GB of RAM, which allows them to be allocated from the linear map on most non-NUMA images. Other big hashes like futex and TCP should eventually be moved over to the same style of allocation as those vfs caches that use HASH_EARLY if !hashdist, so they don't exceed MAX_ORDER on very large non-NUMA images. This brings dTLB misses for linux kernel tree `git diff` from ~45,000 to ~8,000 on a Kaby Lake KVM guest with 8MB dentry hash and mitigations=off (performance is in the noise, under 1% difference, page tables are likely to be well cached for this workload). Link: http://lkml.kernel.org/r/20190605144814.29319-2-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
ec11408 | Nicholas Piggin | 12 July 2019, 03:59:09 UTC | mm/large system hash: use vmalloc for size > MAX_ORDER when !hashdist The kernel currently clamps large system hashes to MAX_ORDER when hashdist is not set, which is rather arbitrary. vmalloc space is limited on 32-bit machines, but this shouldn't result in much more used because of small physical memory limiting system hash sizes. Include "vmalloc" or "linear" in the kernel log message. Link: http://lkml.kernel.org/r/20190605144814.29319-1-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
d9009d6 | Geert Uytterhoeven | 12 July 2019, 03:59:06 UTC | mm/vmalloc.c: spelling> s/informaion/information/ Link: http://lkml.kernel.org/r/20190607113509.15032-1-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
460e42d | Uladzislau Rezki (Sony) | 12 July 2019, 03:59:03 UTC | mm/vmalloc.c: switch to WARN_ON() and move it under unlink_va() Trigger a warning if an object that is about to be freed is detached. We used to have a BUG_ON(), but even though it is considered as faulty behaviour that is not a good reason to break a system. Link: http://lkml.kernel.org/r/20190606120411.8298-5-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
54f63d9 | Uladzislau Rezki (Sony) | 12 July 2019, 03:59:00 UTC | mm/vmalloc.c: get rid of one single unlink_va() when merge It does not make sense to try to "unlink" the node that is definitely not linked with a list nor tree. On the first merge step VA just points to the previously disconnected busy area. On the second step, check if the node has been merged and do "unlink" if so, because now it points to an object that must be linked. Link: http://lkml.kernel.org/r/20190606120411.8298-4-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Acked-by: Hillf Danton <hdanton@sina.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
82dd23e | Uladzislau Rezki (Sony) | 12 July 2019, 03:58:57 UTC | mm/vmalloc.c: preload a CPU with one object for split purpose Refactor the NE_FIT_TYPE split case when it comes to an allocation of one extra object. We need it in order to build a remaining space. The preload is done per CPU in non-atomic context with GFP_KERNEL flags. More permissive parameters can be beneficial for systems which are suffer from high memory pressure or low memory condition. For example on my KVM system(4xCPUs, no swap, 256MB RAM) i can simulate the failure of page allocation with GFP_NOWAIT flags. Using "stress-ng" tool and starting N workers spinning on fork() and exit(), i can trigger below trace: <snip> [ 179.815161] stress-ng-fork: page allocation failure: order:0, mode:0x40800(GFP_NOWAIT|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 [ 179.815168] CPU: 0 PID: 12612 Comm: stress-ng-fork Not tainted 5.2.0-rc3+ #1003 [ 179.815170] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 179.815171] Call Trace: [ 179.815178] dump_stack+0x5c/0x7b [ 179.815182] warn_alloc+0x108/0x190 [ 179.815187] __alloc_pages_slowpath+0xdc7/0xdf0 [ 179.815191] __alloc_pages_nodemask+0x2de/0x330 [ 179.815194] cache_grow_begin+0x77/0x420 [ 179.815197] fallback_alloc+0x161/0x200 [ 179.815200] kmem_cache_alloc+0x1c9/0x570 [ 179.815202] alloc_vmap_area+0x32c/0x990 [ 179.815206] __get_vm_area_node+0xb0/0x170 [ 179.815208] __vmalloc_node_range+0x6d/0x230 [ 179.815211] ? _do_fork+0xce/0x3d0 [ 179.815213] copy_process.part.46+0x850/0x1b90 [ 179.815215] ? _do_fork+0xce/0x3d0 [ 179.815219] _do_fork+0xce/0x3d0 [ 179.815226] ? __do_page_fault+0x2bf/0x4e0 [ 179.815229] do_syscall_64+0x55/0x130 [ 179.815231] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 179.815234] RIP: 0033:0x7fedec4c738b ... [ 179.815237] RSP: 002b:00007ffda469d730 EFLAGS: 00000246 ORIG_RAX: 0000000000000038 [ 179.815239] RAX: ffffffffffffffda RBX: 00007ffda469d730 RCX: 00007fedec4c738b [ 179.815240] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000001200011 [ 179.815241] RBP: 00007ffda469d780 R08: 00007fededd6e300 R09: 00007ffda47f50a0 [ 179.815242] R10: 00007fededd6e5d0 R11: 0000000000000246 R12: 0000000000000000 [ 179.815243] R13: 0000000000000020 R14: 0000000000000000 R15: 0000000000000000 [ 179.815245] Mem-Info: [ 179.815249] active_anon:12686 inactive_anon:14760 isolated_anon:0 active_file:502 inactive_file:61 isolated_file:70 unevictable:2 dirty:0 writeback:0 unstable:0 slab_reclaimable:2380 slab_unreclaimable:7520 mapped:15069 shmem:14813 pagetables:10833 bounce:0 free:1922 free_pcp:229 free_cma:0 <snip> Link: http://lkml.kernel.org/r/20190606120411.8298-3-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Roman Gushchin <guro@fb.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
cacca6b | Uladzislau Rezki (Sony) | 12 July 2019, 03:58:53 UTC | mm/vmalloc.c: remove "node" argument Patch series "Some cleanups for the KVA/vmalloc", v5. This patch (of 4): Remove unused argument from the __alloc_vmap_area() function. Link: http://lkml.kernel.org/r/20190606120411.8298-2-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
543bdb2 | Jean-Philippe Brucker | 12 July 2019, 03:58:50 UTC | mm/mmu_notifier: use hlist_add_head_rcu() Make mmu_notifier_register() safer by issuing a memory barrier before registering a new notifier. This fixes a theoretical bug on weakly ordered CPUs. For example, take this simplified use of notifiers by a driver: my_struct->mn.ops = &my_ops; /* (1) */ mmu_notifier_register(&my_struct->mn, mm) ... hlist_add_head(&mn->hlist, &mm->mmu_notifiers); /* (2) */ ... Once mmu_notifier_register() releases the mm locks, another thread can invalidate a range: mmu_notifier_invalidate_range() ... hlist_for_each_entry_rcu(mn, &mm->mmu_notifiers, hlist) { if (mn->ops->invalidate_range) The read side relies on the data dependency between mn and ops to ensure that the pointer is properly initialized. But the write side doesn't have any dependency between (1) and (2), so they could be reordered and the readers could dereference an invalid mn->ops. mmu_notifier_register() does take all the mm locks before adding to the hlist, but those have acquire semantics which isn't sufficient. By calling hlist_add_head_rcu() instead of hlist_add_head() we update the hlist using a store-release, ensuring that readers see prior initialization of my_struct. This situation is better illustated by litmus test MP+onceassign+derefonce. Link: http://lkml.kernel.org/r/20190502133532.24981-1-jean-philippe.brucker@arm.com Fixes: cddb8a5c14aa ("mmu-notifiers: core") Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
96756fc | Miguel Ojeda | 12 July 2019, 03:58:47 UTC | mm/memory.c: fail when offset == num in first check of __vm_map_pages() If the caller asks us for offset == num, we should already fail in the first check, i.e. the one testing for offsets beyond the object. At the moment, we are failing on the second test anyway, since count cannot be 0. Still, to agree with the comment of the first test, we should first test it there. Link: http://lkml.kernel.org/r/20190528193004.GA7744@gmail.com Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
8b1e0f8 | Anshuman Khandual | 12 July 2019, 03:58:43 UTC | mm/pgtable: drop pgtable_t variable from pte_fn_t functions Drop the pgtable_t variable from all implementation for pte_fn_t as none of them use it. apply_to_pte_range() should stop computing it as well. Should help us save some cycles. Link: http://lkml.kernel.org/r/1556803126-26596-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Matthew Wilcox <willy@infradead.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <jglisse@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
c2471e7 | Mike Rapoport | 12 July 2019, 03:58:39 UTC | unicore32: switch to generic version of pte allocation Replace __get_free_page() and alloc_pages() calls with the generic __pte_alloc_one_kernel() and __pte_alloc_one(). There is no functional change for the kernel PTE allocation. The difference for the user PTEs, is that the clear_pte_table() is now called after pgtable_page_ctor() and the addition of __GFP_ACCOUNT to the GFP flags. The pte_free() and pte_free_kernel() versions are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-15-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Guo Ren <ren_guo@c-sky.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:46 UTC |
f32848e | Mike Rapoport | 12 July 2019, 03:58:35 UTC | um: switch to generic version of pte allocation um allocates PTE pages with __get_free_page() and uses GFP_KERNEL | __GFP_ZERO for the allocations. Switch it to the generic version that does exactly the same thing for the kernel page tables and adds __GFP_ACCOUNT for the user PTEs. The pte_free() and pte_free_kernel() versions are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-14-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
d1b46fe | Mike Rapoport | 12 July 2019, 03:58:31 UTC | riscv: switch to generic version of pte allocation The only difference between the generic and RISC-V implementation of PTE allocation is the usage of __GFP_RETRY_MAYFAIL for both kernel and user PTEs and the absence of __GFP_ACCOUNT for the user PTEs. The conversion to the generic version removes the __GFP_RETRY_MAYFAIL and ensures that GFP_ACCOUNT is used for the user PTE allocations. The pte_free() and pte_free_kernel() versions are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-13-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
3f4a130 | Mike Rapoport | 12 July 2019, 03:58:27 UTC | parisc: switch to generic version of pte allocation parisc allocates PTE pages with __get_free_page() and uses GFP_KERNEL | __GFP_ZERO for the allocations. Switch it to the generic version that does exactly the same thing for the kernel page tables and adds __GFP_ACCOUNT for the user PTEs. The pte_free_kernel() and pte_free() versions on are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-12-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
fc7835c | Mike Rapoport | 12 July 2019, 03:58:22 UTC | nios2: switch to generic version of pte allocation nios2 allocates kernel PTE pages with __get_free_pages(GFP_KERNEL | __GFP_ZERO, PTE_ORDER); and user page tables with pte = alloc_pages(GFP_KERNEL, PTE_ORDER); if (pte) clear_highpage(); The PTE_ORDER is hardwired to zero, which makes nios2 implementation almost identical to the generic one. Switch nios2 to the generic version that does exactly the same thing for the kernel page tables and adds __GFP_ACCOUNT for the user PTEs. The pte_free_kernel() and pte_free() versions on nios2 are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
f52a8e1 | Mike Rapoport | 12 July 2019, 03:58:18 UTC | nds32: switch to generic version of pte allocation The nds32 implementation of pte_alloc_one_kernel() differs from the generic in the use of __GFP_RETRY_MAYFAIL flag, which is removed after the conversion. The nds32 version of pte_alloc_one() missed the call to pgtable_page_ctor() and also used __GFP_RETRY_MAYFAIL. Switching it to use generic __pte_alloc_one() for the PTE page allocation ensures that page table constructor is run and the user page tables are allocated with __GFP_ACCOUNT. The conversion to the generic version of pte_free_kernel() removes the NULL check for pte. The pte_free() version on nds32 is identical to the generic one and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-10-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
b7902ce | Mike Rapoport | 12 July 2019, 03:58:14 UTC | mips: switch to generic version of pte allocation MIPS allocates kernel PTE pages with __get_free_pages(GFP_KERNEL | __GFP_ZERO, PTE_ORDER) and user PTE pages with pte = alloc_pages(GFP_KERNEL, PTE_ORDER) and then uses clear_highpage(pte) to zero out the allocated page for the user page tables. The PTE_ORDER is hardwired to zero, which makes MIPS implementation almost identical to the generic one. Switch MIPS to the generic version that does exactly the same thing for the kernel page tables and adds __GFP_ACCOUNT for the user PTEs. The pte_free_kernel() and pte_free() versions on mips are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-9-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Paul Burton <paul.burton@mips.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
14c0a39 | Mike Rapoport | 12 July 2019, 03:58:10 UTC | m68k: sun3: switch to generic version of pte allocation The sun3 MMU variant of m68k uses GFP_KERNEL to allocate a PTE page and then memset(0) or clear_highpage() to clear it. This is equivalent to allocating the page with GFP_KERNEL | __GFP_ZERO, which allows replacing sun3 implementation of pte_alloc_one() and pte_alloc_one_kernel() with the generic ones. The pte_free() and pte_free_kernel() versions are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-8-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
bd5ff06 | Mike Rapoport | 12 July 2019, 03:58:06 UTC | csky: switch to generic version of pte allocation The csky implementation pte_alloc_one(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch csky to use generic version of these functions. The csky implementation of pte_alloc_one_kernel() is not replaced because it does not clear the allocated page but rather sets each PTE in it to a non-zero value. The pte_free_kernel() and pte_free() versions on csky are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-6-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Guo Ren <ren_guo@c-sky.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
50f11a8 | Mike Rapoport | 12 July 2019, 03:58:02 UTC | arm64: switch to generic version of pte allocation The PTE allocations in arm64 are identical to the generic ones modulo the GFP flags. Using the generic pte_alloc_one() functions ensures that the user page tables are allocated with __GFP_ACCOUNT set. The arm64 definition of PGALLOC_GFP is removed and replaced with GFP_PGTABLE_USER for p[gum]d_alloc_one() for the user page tables and GFP_PGTABLE_KERNEL for the kernel page tables. The KVM memory cache is now using GFP_PGTABLE_USER. The mappings created with create_pgd_mapping() are now using GFP_PGTABLE_KERNEL. The conversion to the generic version of pte_free_kernel() removes the NULL check for pte. The pte_free() version on arm64 is identical to the generic one and can be simply dropped. [cai@lca.pw: fix a bogus GFP flag in pgd_alloc()] Link: https://lore.kernel.org/r/1559656836-24940-1-git-send-email-cai@lca.pw/ [and fix it more] Link: https://lore.kernel.org/linux-mm/20190617151252.GF16810@rapoport-lnx/ Link: http://lkml.kernel.org/r/1557296232-15361-5-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
28bcf59 | Mike Rapoport | 12 July 2019, 03:57:57 UTC | arm: switch to generic version of pte allocation Replace __get_free_page() and alloc_pages() calls with the generic __pte_alloc_one_kernel() and __pte_alloc_one(). There is no functional change for the kernel PTE allocation. The difference for the user PTEs, is that the clear_pte_table() is now called after pgtable_page_ctor() and the addition of __GFP_ACCOUNT to the GFP flags. The conversion to the generic version of pte_free_kernel() removes the NULL check for pte. The pte_free() version on arm is identical to the generic one and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-4-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
bc3ace9 | Mike Rapoport | 12 July 2019, 03:57:53 UTC | alpha: switch to generic version of pte allocation alpha allocates PTE pages with __get_free_page() and uses GFP_KERNEL | __GFP_ZERO for the allocations. Switch it to the generic version that does exactly the same thing for the kernel page tables and adds __GFP_ACCOUNT for the user PTEs. The alpha pte_free() and pte_free_kernel() versions are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-3-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
5fba4af | Mike Rapoport | 12 July 2019, 03:57:49 UTC | asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel] Most architectures have identical or very similar implementation of pte_alloc_one_kernel(), pte_alloc_one(), pte_free_kernel() and pte_free(). Add a generic implementation that can be reused across architectures and enable its use on x86. The generic implementation uses GFP_KERNEL | __GFP_ZERO for the kernel page tables and GFP_KERNEL | __GFP_ZERO | __GFP_ACCOUNT for the user page tables. The "base" functions for PTE allocation, namely __pte_alloc_one_kernel() and __pte_alloc_one() are intended for the architectures that require additional actions after actual memory allocation or must use non-default GFP flags. x86 is switched to use generic pte_alloc_one_kernel(), pte_free_kernel() and pte_free(). x86 still implements pte_alloc_one() to allow run-time control of GFP flags required for "userpte" command line option. Link: http://lkml.kernel.org/r/1557296232-15361-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
790c736 | Guenter Roeck | 12 July 2019, 03:57:46 UTC | mm/gup.c: mark undo_dev_pagemap as __maybe_unused Several mips builds generate the following build warning. mm/gup.c:1788:13: warning: 'undo_dev_pagemap' defined but not used The function is declared unconditionally but only called from behind various ifdefs. Mark it __maybe_unused. Link: http://lkml.kernel.org/r/1562072523-22311-1-git-send-email-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
b5d1c39 | Andy Lutomirski | 12 July 2019, 03:57:43 UTC | mm/gup.c: remove some BUG_ONs from get_gate_page() If we end up without a PGD or PUD entry backing the gate area, don't BUG -- just fail gracefully. It's not entirely implausible that this could happen some day on x86. It doesn't right now even with an execute-only emulated vsyscall page because the fixmap shares the PUD, but the core mm code shouldn't rely on that particular detail to avoid OOPSing. Link: http://lkml.kernel.org/r/a1d9f4efb75b9d464e59fd6af00104b21c58f6f7.1561610798.git.luto@kernel.org Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
aa71239 | Pingfan Liu | 12 July 2019, 03:57:39 UTC | mm/gup: speed up check_and_migrate_cma_pages() on huge page Both hugetlb and thp locate on the same migration type of pageblock, since they are allocated from a free_list[]. Based on this fact, it is enough to check on a single subpage to decide the migration type of the whole huge page. By this way, it saves (2M/4K - 1) times loop for pmd_huge on x86, similar on other archs. Furthermore, when executing isolate_huge_page(), it avoid taking global hugetlb_lock many times, and meanless remove/add to the local link list cma_page_list. [akpm@linux-foundation.org: make `i' and `step' unsigned] Link: http://lkml.kernel.org/r/1561612545-28997-1-git-send-email-kernelfans@gmail.com Signed-off-by: Pingfan Liu <kernelfans@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Keith Busch <keith.busch@intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
520b4a4 | Christoph Hellwig | 12 July 2019, 03:57:36 UTC | mm: mark the page referenced in gup_hugepte All other get_user_page_fast cases mark the page referenced, so do this here as well. Link: http://lkml.kernel.org/r/20190625143715.1689-17-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
01a3691 | Christoph Hellwig | 12 July 2019, 03:57:32 UTC | mm: switch gup_hugepte to use try_get_compound_head This applies the overflow fixes from 8fde12ca79aff ("mm: prevent get_user_pages() from overflowing page refcount") to the powerpc hugepd code and brings it back in sync with the other GUP cases. Link: http://lkml.kernel.org/r/20190625143715.1689-16-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
cbd34da | Christoph Hellwig | 12 July 2019, 03:57:28 UTC | mm: move the powerpc hugepd code to mm/gup.c While only powerpc supports the hugepd case, the code is pretty generic and I'd like to keep all GUP internals in one place. Link: http://lkml.kernel.org/r/20190625143715.1689-15-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
817be12 | Christoph Hellwig | 12 July 2019, 03:57:25 UTC | mm: validate get_user_pages_fast flags We can only deal with FOLL_WRITE and/or FOLL_LONGTERM in get_user_pages_fast, so reject all other flags. Link: http://lkml.kernel.org/r/20190625143715.1689-14-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
050a9ad | Christoph Hellwig | 12 July 2019, 03:57:21 UTC | mm: consolidate the get_user_pages* implementations Always build mm/gup.c so that we don't have to provide separate nommu stubs. Also merge the get_user_pages_fast and __get_user_pages_fast stubs when HAVE_FAST_GUP into the main implementations, which will never call the fast path if HAVE_FAST_GUP is not set. This also ensures the new put_user_pages* helpers are available for nommu, as those are currently missing, which would create a problem as soon as we actually grew users for it. Link: http://lkml.kernel.org/r/20190625143715.1689-13-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
d3649f6 | Christoph Hellwig | 12 July 2019, 03:57:18 UTC | mm: reorder code blocks in gup.c This moves the actually exported functions towards the end of the file, and reorders some functions to be in more logical blocks as a preparation for moving various stubs inline into the main functionality using IS_ENABLED(). Link: http://lkml.kernel.org/r/20190625143715.1689-12-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:45 UTC |
67a929e | Christoph Hellwig | 12 July 2019, 03:57:14 UTC | mm: rename CONFIG_HAVE_GENERIC_GUP to CONFIG_HAVE_FAST_GUP We only support the generic GUP now, so rename the config option to be more clear, and always use the mm/Kconfig definition of the symbol and select it from the arch Kconfigs. Link: http://lkml.kernel.org/r/20190625143715.1689-11-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
7b9afb8 | Christoph Hellwig | 12 July 2019, 03:57:11 UTC | sparc64: use the generic get_user_pages_fast code The sparc64 code is mostly equivalent to the generic one, minus various bugfixes and two arch overrides that this patch adds to pgtable.h. Link: http://lkml.kernel.org/r/20190625143715.1689-10-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
5875509 | Christoph Hellwig | 12 July 2019, 03:57:07 UTC | sparc64: define untagged_addr() Add a helper to untag a user pointer. This is needed for ADI support in get_user_pages_fast. Link: http://lkml.kernel.org/r/20190625143715.1689-9-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
d855079 | Christoph Hellwig | 12 July 2019, 03:57:03 UTC | sparc64: add the missing pgd_page definition sparc64 only had pgd_page_vaddr, but not pgd_page. [hch@lst.de: fix sparc64 build] Link: http://lkml.kernel.org/r/20190626131318.GA5101@lst.de Link: http://lkml.kernel.org/r/20190625143715.1689-8-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: David Miller <davem@davemloft.net> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
3c9b9ac | Christoph Hellwig | 12 July 2019, 03:57:00 UTC | sh: use the generic get_user_pages_fast code The sh code is mostly equivalent to the generic one, minus various bugfixes and two arch overrides that this patch adds to pgtable.h. Link: http://lkml.kernel.org/r/20190625143715.1689-7-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
2f85e7f | Christoph Hellwig | 12 July 2019, 03:56:56 UTC | sh: add the missing pud_page definition sh only had pud_page_vaddr, but not pud_page. [hch@lst.de: sh: stub out pud_page] Link: http://lkml.kernel.org/r/20190701151818.32227-2-hch@lst.de Link: http://lkml.kernel.org/r/20190625143715.1689-6-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
446f062 | Christoph Hellwig | 12 July 2019, 03:56:52 UTC | MIPS: use the generic get_user_pages_fast code The mips code is mostly equivalent to the generic one, minus various bugfixes and an arch override for gup_fast_permitted. Note that this defines ARCH_HAS_PTE_SPECIAL for mips as mips has pte_special and pte_mkspecial implemented and used in the existing gup code. They are no-op stubs, though which makes me a little unsure if this is really right thing to do. Note that this also adds back a missing cpu_has_dc_aliases check for __get_user_pages_fast, which the old code was only doing for get_user_pages_fast. This clearly looks like an oversight, as any condition that makes get_user_pages_fast unsafe also applies to __get_user_pages_fast. [hch@lst.de: MIPS: don't select ARCH_HAS_PTE_SPECIAL] Link: http://lkml.kernel.org/r/20190701151818.32227-3-hch@lst.de Link: http://lkml.kernel.org/r/20190625143715.1689-5-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
39656e8 | Christoph Hellwig | 12 July 2019, 03:56:49 UTC | mm: lift the x86_32 PAE version of gup_get_pte to common code The split low/high access is the only non-READ_ONCE version of gup_get_pte that did show up in the various arch implemenations. Lift it to common code and drop the ifdef based arch override. Link: http://lkml.kernel.org/r/20190625143715.1689-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
26f4c32 | Christoph Hellwig | 12 July 2019, 03:56:45 UTC | mm: simplify gup_fast_permitted Pass in the already calculated end value instead of recomputing it, and leave the end > start check in the callers instead of duplicating them in the arch code. Link: http://lkml.kernel.org/r/20190625143715.1689-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
f455c85 | Christoph Hellwig | 12 July 2019, 03:56:41 UTC | mm: use untagged_addr() for get_user_pages_fast addresses Patch series "switch the remaining architectures to use generic GUP", v4. A series to switch mips, sh and sparc64 to use the generic GUP code so that we only have one codebase to touch for further improvements to this code. This patch (of 16): This will allow sparc64, or any future architecture with memory tagging to override its tags for get_user_pages and get_user_pages_fast. Link: http://lkml.kernel.org/r/20190625143715.1689-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: David Miller <davem@davemloft.net> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
fcf8a1e | Waiman Long | 12 July 2019, 03:56:38 UTC | mm, memcg: add a memcg_slabinfo debugfs file There are concerns about memory leaks from extensive use of memory cgroups as each memory cgroup creates its own set of kmem caches. There is a possiblity that the memcg kmem caches may remain even after the memory cgroups have been offlined. Therefore, it will be useful to show the status of each of memcg kmem caches. This patch introduces a new <debugfs>/memcg_slabinfo file which is somewhat similar to /proc/slabinfo in format, but lists only information about kmem caches that have child memcg kmem caches. Information available in /proc/slabinfo are not repeated in memcg_slabinfo. A portion of a sample output of the file was: # <name> <css_id[:dead]> <active_objs> <num_objs> <active_slabs> <num_slabs> rpc_inode_cache root 13 51 1 1 rpc_inode_cache 48 0 0 0 0 fat_inode_cache root 1 45 1 1 fat_inode_cache 41 2 45 1 1 xfs_inode root 770 816 24 24 xfs_inode 92 22 34 1 1 xfs_inode 88:dead 1 34 1 1 xfs_inode 89:dead 23 34 1 1 xfs_inode 85 4 34 1 1 xfs_inode 84 9 34 1 1 The css id of the memcg is also listed. If a memcg is not online, the tag ":dead" will be attached as shown above. [longman@redhat.com: memcg: add ":deact" tag for reparented kmem caches in memcg_slabinfo] Link: http://lkml.kernel.org/r/20190621173005.31514-1-longman@redhat.com [longman@redhat.com: set the flag in the common code as suggested by Roman] Link: http://lkml.kernel.org/r/20190627184324.5875-1-longman@redhat.com Link: http://lkml.kernel.org/r/20190619171621.26209-1-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Suggested-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
fb2f2b0 | Roman Gushchin | 12 July 2019, 03:56:34 UTC | mm: memcg/slab: reparent memcg kmem_caches on cgroup removal Let's reparent non-root kmem_caches on memcg offlining. This allows us to release the memory cgroup without waiting for the last outstanding kernel object (e.g. dentry used by another application). Since the parent cgroup is already charged, everything we need to do is to splice the list of kmem_caches to the parent's kmem_caches list, swap the memcg pointer, drop the css refcounter for each kmem_cache and adjust the parent's css refcounter. Please, note that kmem_cache->memcg_params.memcg isn't a stable pointer anymore. It's safe to read it under rcu_read_lock(), cgroup_mutex held, or any other way that protects the memory cgroup from being released. We can race with the slab allocation and deallocation paths. It's not a big problem: parent's charge and slab global stats are always correct, and we don't care anymore about the child usage and global stats. The child cgroup is already offline, so we don't use or show it anywhere. Local slab stats (NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE) aren't used anywhere except count_shadow_nodes(). But even there it won't break anything: after reparenting "nodes" will be 0 on child level (because we're already reparenting shrinker lists), and on parent level page stats always were 0, and this patch won't change anything. [guro@fb.com: properly handle kmem_caches reparented to root_mem_cgroup] Link: http://lkml.kernel.org/r/20190620213427.1691847-1-guro@fb.com Link: http://lkml.kernel.org/r/20190611231813.3148843-11-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Waiman Long <longman@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Andrei Vagin <avagin@gmail.com> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
4d96ba3 | Roman Gushchin | 12 July 2019, 03:56:31 UTC | mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages Every slab page charged to a non-root memory cgroup has a pointer to the memory cgroup and holds a reference to it, which protects a non-empty memory cgroup from being released. At the same time the page has a pointer to the corresponding kmem_cache, and also hold a reference to the kmem_cache. And kmem_cache by itself holds a reference to the cgroup. So there is clearly some redundancy, which allows to stop setting the page->mem_cgroup pointer and rely on getting memcg pointer indirectly via kmem_cache. Further it will allow to change this pointer easier, without a need to go over all charged pages. So let's stop setting page->mem_cgroup pointer for slab pages, and stop using the css refcounter directly for protecting the memory cgroup from going away. Instead rely on kmem_cache as an intermediate object. Make sure that vmstats and shrinker lists are working as previously, as well as /proc/kpagecgroup interface. Link: http://lkml.kernel.org/r/20190611231813.3148843-10-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Waiman Long <longman@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Andrei Vagin <avagin@gmail.com> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
f0a3a24 | Roman Gushchin | 12 July 2019, 03:56:27 UTC | mm: memcg/slab: rework non-root kmem_cache lifecycle management Currently each charged slab page holds a reference to the cgroup to which it's charged. Kmem_caches are held by the memcg and are released all together with the memory cgroup. It means that none of kmem_caches are released unless at least one reference to the memcg exists, which is very far from optimal. Let's rework it in a way that allows releasing individual kmem_caches as soon as the cgroup is offline, the kmem_cache is empty and there are no pending allocations. To make it possible, let's introduce a new percpu refcounter for non-root kmem caches. The counter is initialized to the percpu mode, and is switched to the atomic mode during kmem_cache deactivation. The counter is bumped for every charged page and also for every running allocation. So the kmem_cache can't be released unless all allocations complete. To shutdown non-active empty kmem_caches, let's reuse the work queue, previously used for the kmem_cache deactivation. Once the reference counter reaches 0, let's schedule an asynchronous kmem_cache release. * I used the following simple approach to test the performance (stolen from another patchset by T. Harding): time find / -name fname-no-exist echo 2 > /proc/sys/vm/drop_caches repeat 10 times Results: orig patched real 0m1.455s real 0m1.355s user 0m0.206s user 0m0.219s sys 0m0.855s sys 0m0.807s real 0m1.487s real 0m1.699s user 0m0.221s user 0m0.256s sys 0m0.806s sys 0m0.948s real 0m1.515s real 0m1.505s user 0m0.183s user 0m0.215s sys 0m0.876s sys 0m0.858s real 0m1.291s real 0m1.380s user 0m0.193s user 0m0.198s sys 0m0.843s sys 0m0.786s real 0m1.364s real 0m1.374s user 0m0.180s user 0m0.182s sys 0m0.868s sys 0m0.806s real 0m1.352s real 0m1.312s user 0m0.201s user 0m0.212s sys 0m0.820s sys 0m0.761s real 0m1.302s real 0m1.349s user 0m0.205s user 0m0.203s sys 0m0.803s sys 0m0.792s real 0m1.334s real 0m1.301s user 0m0.194s user 0m0.201s sys 0m0.806s sys 0m0.779s real 0m1.426s real 0m1.434s user 0m0.216s user 0m0.181s sys 0m0.824s sys 0m0.864s real 0m1.350s real 0m1.295s user 0m0.200s user 0m0.190s sys 0m0.842s sys 0m0.811s So it looks like the difference is not noticeable in this test. [cai@lca.pw: fix an use-after-free in kmemcg_workfn()] Link: http://lkml.kernel.org/r/1560977573-10715-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/20190611231813.3148843-9-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Waiman Long <longman@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Andrei Vagin <avagin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
63b02ef | Roman Gushchin | 12 July 2019, 03:56:24 UTC | mm: memcg/slab: synchronize access to kmem_cache dying flag using a spinlock Currently the memcg_params.dying flag and the corresponding workqueue used for the asynchronous deactivation of kmem_caches is synchronized using the slab_mutex. It makes impossible to check this flag from the irq context, which will be required in order to implement asynchronous release of kmem_caches. So let's switch over to the irq-save flavor of the spinlock-based synchronization. Link: http://lkml.kernel.org/r/20190611231813.3148843-8-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Waiman Long <longman@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Andrei Vagin <avagin@gmail.com> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
5703329 | Roman Gushchin | 12 July 2019, 03:56:20 UTC | mm: memcg/slab: don't check the dying flag on kmem_cache creation There is no point in checking the root_cache->memcg_params.dying flag on kmem_cache creation path. New allocations shouldn't be performed using a dead root kmem_cache, so no new memcg kmem_cache creation can be scheduled after the flag is set. And if it was scheduled before, flush_memcg_workqueue() will wait for it anyway. So let's drop this check to simplify the code. Link: http://lkml.kernel.org/r/20190611231813.3148843-7-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Waiman Long <longman@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Andrei Vagin <avagin@gmail.com> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
6cea1d5 | Roman Gushchin | 12 July 2019, 03:56:16 UTC | mm: memcg/slab: unify SLAB and SLUB page accounting Currently the page accounting code is duplicated in SLAB and SLUB internals. Let's move it into new (un)charge_slab_page helpers in the slab_common.c file. These helpers will be responsible for statistics (global and memcg-aware) and memcg charging. So they are replacing direct memcg_(un)charge_slab() calls. Link: http://lkml.kernel.org/r/20190611231813.3148843-6-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Waiman Long <longman@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Andrei Vagin <avagin@gmail.com> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
49a18ea | Roman Gushchin | 12 July 2019, 03:56:13 UTC | mm: memcg/slab: introduce __memcg_kmem_uncharge_memcg() Let's separate the page counter modification code out of __memcg_kmem_uncharge() in a way similar to what __memcg_kmem_charge() and __memcg_kmem_charge_memcg() work. This will allow to reuse this code later using a new memcg_kmem_uncharge_memcg() wrapper, which calls __memcg_kmem_uncharge_memcg() if memcg_kmem_enabled() check is passed. Link: http://lkml.kernel.org/r/20190611231813.3148843-5-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Waiman Long <longman@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Andrei Vagin <avagin@gmail.com> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
4348669 | Roman Gushchin | 12 July 2019, 03:56:09 UTC | mm: memcg/slab: generalize postponed non-root kmem_cache deactivation Currently SLUB uses a work scheduled after an RCU grace period to deactivate a non-root kmem_cache. This mechanism can be reused for kmem_caches release, but requires generalization for SLAB case. Introduce kmemcg_cache_deactivate() function, which calls allocator-specific __kmem_cache_deactivate() and schedules execution of __kmem_cache_deactivate_after_rcu() with all necessary locks in a worker context after an rcu grace period. Here is the new calling scheme: kmemcg_cache_deactivate() __kmemcg_cache_deactivate() SLAB/SLUB-specific kmemcg_rcufn() rcu kmemcg_workfn() work __kmemcg_cache_deactivate_after_rcu() SLAB/SLUB-specific instead of: __kmemcg_cache_deactivate() SLAB/SLUB-specific slab_deactivate_memcg_cache_rcu_sched() SLUB-only kmemcg_rcufn() rcu kmemcg_workfn() work kmemcg_cache_deact_after_rcu() SLUB-only For consistency, all allocator-specific functions start with "__". Link: http://lkml.kernel.org/r/20190611231813.3148843-4-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Waiman Long <longman@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Andrei Vagin <avagin@gmail.com> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
0b14e8a | Roman Gushchin | 12 July 2019, 03:56:06 UTC | mm: memcg/slab: rename slab delayed deactivation functions and fields The delayed work/rcu deactivation infrastructure of non-root kmem_caches can be also used for asynchronous release of these objects. Let's get rid of the word "deactivation" in corresponding names to make the code look better after generalization. It's easier to make the renaming first, so that the generalized code will look consistent from scratch. Let's rename struct memcg_cache_params fields: deact_fn -> work_fn deact_rcu_head -> rcu_head deact_work -> work And RCU/delayed work callbacks in slab common code: kmemcg_deactivate_rcufn -> kmemcg_rcufn kmemcg_deactivate_workfn -> kmemcg_workfn This patch contains no functional changes, only renamings. Link: http://lkml.kernel.org/r/20190611231813.3148843-3-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Waiman Long <longman@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Andrei Vagin <avagin@gmail.com> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:44 UTC |
c03914b | Roman Gushchin | 12 July 2019, 03:56:02 UTC | mm: memcg/slab: postpone kmem_cache memcg pointer initialization to memcg_link_cache() Patch series "mm: reparent slab memory on cgroup removal", v7. # Why do we need this? We've noticed that the number of dying cgroups is steadily growing on most of our hosts in production. The following investigation revealed an issue in the userspace memory reclaim code [1], accounting of kernel stacks [2], and also the main reason: slab objects. The underlying problem is quite simple: any page charged to a cgroup holds a reference to it, so the cgroup can't be reclaimed unless all charged pages are gone. If a slab object is actively used by other cgroups, it won't be reclaimed, and will prevent the origin cgroup from being reclaimed. Slab objects, and first of all vfs cache, is shared between cgroups, which are using the same underlying fs, and what's even more important, it's shared between multiple generations of the same workload. So if something is running periodically every time in a new cgroup (like how systemd works), we do accumulate multiple dying cgroups. Strictly speaking pagecache isn't different here, but there is a key difference: we disable protection and apply some extra pressure on LRUs of dying cgroups, and these LRUs contain all charged pages. My experiments show that with the disabled kernel memory accounting the number of dying cgroups stabilizes at a relatively small number (~100, depends on memory pressure and cgroup creation rate), and with kernel memory accounting it grows pretty steadily up to several thousands. Memory cgroups are quite complex and big objects (mostly due to percpu stats), so it leads to noticeable memory losses. Memory occupied by dying cgroups is measured in hundreds of megabytes. I've even seen a host with more than 100Gb of memory wasted for dying cgroups. It leads to a degradation of performance with the uptime, and generally limits the usage of cgroups. My previous attempt [3] to fix the problem by applying extra pressure on slab shrinker lists caused a regressions with xfs and ext4, and has been reverted [4]. The following attempts to find the right balance [5, 6] were not successful. So instead of trying to find a maybe non-existing balance, let's do reparent accounted slab caches to the parent cgroup on cgroup removal. # Implementation approach There is however a significant problem with reparenting of slab memory: there is no list of charged pages. Some of them are in shrinker lists, but not all. Introducing of a new list is really not an option. But fortunately there is a way forward: every slab page has a stable pointer to the corresponding kmem_cache. So the idea is to reparent kmem_caches instead of slab pages. It's actually simpler and cheaper, but requires some underlying changes: 1) Make kmem_caches to hold a single reference to the memory cgroup, instead of a separate reference per every slab page. 2) Stop setting page->mem_cgroup pointer for memcg slab pages and use page->kmem_cache->memcg indirection instead. It's used only on slab page release, so performance overhead shouldn't be a big issue. 3) Introduce a refcounter for non-root slab caches. It's required to be able to destroy kmem_caches when they become empty and release the associated memory cgroup. There is a bonus: currently we release all memcg kmem_caches all together with the memory cgroup itself. This patchset allows individual kmem_caches to be released as soon as they become inactive and free. Some additional implementation details are provided in corresponding commit messages. # Results Below is the average number of dying cgroups on two groups of our production hosts. They do run some sort of web frontend workload, the memory pressure is moderate. As we can see, with the kernel memory reparenting the number stabilizes in 60s range; however with the original version it grows almost linearly and doesn't show any signs of plateauing. The difference in slab and percpu usage between patched and unpatched versions also grows linearly. In 7 days it exceeded 200Mb. day 0 1 2 3 4 5 6 7 original 56 362 628 752 1070 1250 1490 1560 patched 23 46 51 55 60 57 67 69 mem diff(Mb) 22 74 123 152 164 182 214 241 # Links [1]: commit 68600f623d69 ("mm: don't miss the last page because of round-off error") [2]: commit 9b6f7e163cd0 ("mm: rework memcg kernel stack accounting") [3]: commit 172b06c32b94 ("mm: slowly shrink slabs with a relatively small number of objects") [4]: commit a9a238e83fbb ("Revert "mm: slowly shrink slabs with a relatively small number of objects") [5]: https://lkml.org/lkml/2019/1/28/1865 [6]: https://marc.info/?l=linux-mm&m=155064763626437&w=2 This patch (of 10): Initialize kmem_cache->memcg_params.memcg pointer in memcg_link_cache() rather than in init_memcg_params(). Once kmem_cache will hold a reference to the memory cgroup, it will simplify the refcounting. For non-root kmem_caches memcg_link_cache() is always called before the kmem_cache becomes visible to a user, so it's safe. Link: http://lkml.kernel.org/r/20190611231813.3148843-2-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Waiman Long <longman@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:43 UTC |
c8713d0 | Johannes Weiner | 12 July 2019, 03:55:59 UTC | mm: memcontrol: dump memory.stat during cgroup OOM The current cgroup OOM memory info dump doesn't include all the memory we are tracking, nor does it give insight into what the VM tried to do leading up to the OOM. All that useful info is in memory.stat. Furthermore, the recursive printing for every child cgroup can generate absurd amounts of data on the console for larger cgroup trees, and it's not like we provide a per-cgroup breakdown during global OOM kills. When an OOM kill is triggered, print one set of recursive memory.stat items at the level whose limit triggered the OOM condition. Example output: stress invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0 CPU: 2 PID: 210 Comm: stress Not tainted 5.2.0-rc2-mm1-00247-g47d49835983c #135 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014 Call Trace: dump_stack+0x46/0x60 dump_header+0x4c/0x2d0 oom_kill_process.cold.10+0xb/0x10 out_of_memory+0x200/0x270 ? try_to_free_mem_cgroup_pages+0xdf/0x130 mem_cgroup_out_of_memory+0xb7/0xc0 try_charge+0x680/0x6f0 mem_cgroup_try_charge+0xb5/0x160 __add_to_page_cache_locked+0xc6/0x300 ? list_lru_destroy+0x80/0x80 add_to_page_cache_lru+0x45/0xc0 pagecache_get_page+0x11b/0x290 filemap_fault+0x458/0x6d0 ext4_filemap_fault+0x27/0x36 __do_fault+0x2f/0xb0 __handle_mm_fault+0x9c5/0x1140 ? apic_timer_interrupt+0xa/0x20 handle_mm_fault+0xc5/0x180 __do_page_fault+0x1ab/0x440 ? page_fault+0x8/0x30 page_fault+0x1e/0x30 RIP: 0033:0x55c32167fc10 Code: Bad RIP value. RSP: 002b:00007fff1d031c50 EFLAGS: 00010206 RAX: 000000000dc00000 RBX: 00007fd2db000010 RCX: 00007fd2db000010 RDX: 0000000000000000 RSI: 0000000010001000 RDI: 0000000000000000 RBP: 000055c321680a54 R08: 00000000ffffffff R09: 0000000000000000 R10: 0000000000000022 R11: 0000000000000246 R12: ffffffffffffffff R13: 0000000000000002 R14: 0000000000001000 R15: 0000000010000000 memory: usage 1024kB, limit 1024kB, failcnt 75131 swap: usage 0kB, limit 9007199254740988kB, failcnt 0 Memory cgroup stats for /foo: anon 0 file 0 kernel_stack 36864 slab 274432 sock 0 shmem 0 file_mapped 0 file_dirty 0 file_writeback 0 anon_thp 0 inactive_anon 126976 active_anon 0 inactive_file 0 active_file 0 unevictable 0 slab_reclaimable 0 slab_unreclaimable 274432 pgfault 59466 pgmajfault 1617 workingset_refault 2145 workingset_activate 0 workingset_nodereclaim 0 pgrefill 98952 pgscan 200060 pgsteal 59340 pgactivate 40095 pgdeactivate 96787 pglazyfree 0 pglazyfreed 0 thp_fault_alloc 0 thp_collapse_alloc 0 Tasks state (memory values in pages): [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name [ 200] 0 200 1121 884 53248 29 0 bash [ 209] 0 209 905 246 45056 19 0 stress [ 210] 0 210 66442 56 499712 56349 0 stress oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),oom_memcg=/foo,task_memcg=/foo,task=stress,pid=210,uid=0 Memory cgroup out of memory: Killed process 210 (stress) total-vm:265768kB, anon-rss:0kB, file-rss:224kB, shmem-rss:0kB oom_reaper: reaped process 210 (stress), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB [hannes@cmpxchg.org: s/kvmalloc/kmalloc/ per Michal] Link: http://lkml.kernel.org/r/20190605161133.GA12453@cmpxchg.org Link: http://lkml.kernel.org/r/20190604210509.9744-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:43 UTC |
1e577f9 | Shakeel Butt | 12 July 2019, 03:55:55 UTC | mm, memcg: introduce memory.events.local The memory controller in cgroup v2 exposes memory.events file for each memcg which shows the number of times events like low, high, max, oom and oom_kill have happened for the whole tree rooted at that memcg. Users can also poll or register notification to monitor the changes in that file. Any event at any level of the tree rooted at memcg will notify all the listeners along the path till root_mem_cgroup. There are existing users which depend on this behavior. However there are users which are only interested in the events happening at a specific level of the memcg tree and not in the events in the underlying tree rooted at that memcg. One such use-case is a centralized resource monitor which can dynamically adjust the limits of the jobs running on a system. The jobs can create their sub-hierarchy for their own sub-tasks. The centralized monitor is only interested in the events at the top level memcgs of the jobs as it can then act and adjust the limits of the jobs. Using the current memory.events for such centralized monitor is very inconvenient. The monitor will keep receiving events which it is not interested and to find if the received event is interesting, it has to read memory.event files of the next level and compare it with the top level one. So, let's introduce memory.events.local to the memcg which shows and notify for the events at the memcg level. Now, does memory.stat and memory.pressure need their local versions. IMHO no due to the no internal process contraint of the cgroup v2. The memory.stat file of the top level memcg of a job shows the stats and vmevents of the whole tree. The local stats or vmevents of the top level memcg will only change if there is a process running in that memcg but v2 does not allow that. Similarly for memory.pressure there will not be any process in the internal nodes and thus no chance of local pressure. Link: http://lkml.kernel.org/r/20190527174643.209172-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:43 UTC |
ec16545 | Shakeel Butt | 12 July 2019, 03:55:52 UTC | memcg, fsnotify: no oom-kill for remote memcg charging Commit d46eb14b735b ("fs: fsnotify: account fsnotify metadata to kmemcg") added remote memcg charging for fanotify and inotify event objects. The aim was to charge the memory to the listener who is interested in the events but without triggering the OOM killer. Otherwise there would be security concerns for the listener. At the time, oom-kill trigger was not in the charging path. A parallel work added the oom-kill back to charging path i.e. commit 29ef680ae7c2 ("memcg, oom: move out_of_memory back to the charge path"). So to not trigger oom-killer in the remote memcg, explicitly add __GFP_RETRY_MAYFAIL to the fanotigy and inotify event allocations. Link: http://lkml.kernel.org/r/20190514212259.156585-2-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 July 2019, 18:05:43 UTC |