| 936dbcc | Linus Torvalds | 31 August 2013, 00:05:02 UTC | Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This contains two Oops fixes (opti9xx and HD-audio) and a simple fixup for an Acer laptop. All marked as stable patches" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: opti9xx: Fix conflicting driver object name ALSA: hda - Fix NULL dereference with CONFIG_SND_DYNAMIC_MINORS=n ALSA: hda - Add inverted digital mic fixup for Acer Aspire One | 31 August 2013, 00:05:02 UTC |
| d9eda0f | Linus Torvalds | 30 August 2013, 23:18:59 UTC | Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Two straggling fixes that I had missed as they were posted a couple of weeks ago, causing problems with interrupts (breaking them completely) on the CSR SiRF platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm: prima2: drop nr_irqs in mach as we moved to linear irqdomain irqchip: sirf: move from legacy mode to linear irqdomain | 30 August 2013, 23:18:59 UTC |
| 418a95b | Linus Torvalds | 30 August 2013, 23:17:10 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Since we are getting to the pointy end, one i915 black screen on some machines, and one vmwgfx stop userspace ability to nuke the VM, There might be one or two ati or nouveau fixes trickle in before final, but I think this should pretty much be it" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Split GMR2_REMAP commands if they are to large drm/i915: ivb: fix edp voltage swing reg val | 30 August 2013, 23:17:10 UTC |
| 155e3a3 | Linus Torvalds | 30 August 2013, 23:15:52 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer updates from Dmitry Torokhov: "Just a couple of new IDs in Wacom and xpad drivers, i8042 is now disabled on ARC, and data checks in Elantech driver that were overly relaxed by the previous patch are now tightened" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - disable the driver on ARC platforms Input: xpad - add signature for Razer Onza Classic Edition Input: elantech - fix packet check for v3 and v4 hardware Input: wacom - add support for 0x300 and 0x301 | 30 August 2013, 23:15:52 UTC |
| 41615e8 | Linus Torvalds | 30 August 2013, 00:03:48 UTC | Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "During the percpu reference counting update which was merged during v3.11-rc1, the cgroup destruction path was updated so that a cgroup in the process of dying may linger on the children list, which was necessary as the cgroup should still be included in child/descendant iteration while percpu ref is being killed. Unfortunately, I forgot to update cgroup destruction path accordingly and cgroup destruction may fail spuriously with -EBUSY due to lingering dying children even when there's no live child left - e.g. "rmdir parent/child parent" will usually fail. This can be easily fixed by iterating through the children list to verify that there's no live child left. While this is very late in the release cycle, this bug is very visible to userland and I believe the fix is relatively safe. Thanks Hugh for spotting and providing fix for the issue" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix rmdir EBUSY regression in 3.11 | 30 August 2013, 00:03:48 UTC |
| ff49745 | Linus Torvalds | 30 August 2013, 00:02:48 UTC | Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "This contains one fix which could lead to system-wide lockup on !PREEMPT kernels. It's very late in the cycle but this definitely is a -stable material. The problem is that workqueue worker tasks may process unlimited number of work items back-to-back without every yielding inbetween. This usually isn't noticeable but a work item which re-queues itself waiting for someone else to do something can deadlock with stop_machine. stop_machine will ensure nothing else happens on all other cpus and the requeueing work item will reqeueue itself indefinitely without ever yielding and thus preventing the CPU from entering stop_machine. Kudos to Jamie Liu for spotting and diagnosing the problem. This can be trivially fixed by adding cond_resched() after processing each work item" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: cond_resched() after processing each work item | 30 August 2013, 00:02:48 UTC |
| 06a557f | Linus Torvalds | 30 August 2013, 00:00:40 UTC | Merge tag 'nfs-for-3.11-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfix from Trond Myklebust: "Stable patch to fix a highmem-related data corruption issue on 32-bit ARM platforms" * tag 'nfs-for-3.11-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Fix memory corruption issue on 32-bit highmem systems | 30 August 2013, 00:00:40 UTC |
| 6e4dcff | Jakob Bornecrantz | 29 August 2013, 00:32:53 UTC | drm/vmwgfx: Split GMR2_REMAP commands if they are to large This fixes the piglit test texturing/max-texture-size causing the VM to die due to a too large SVGA command. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Biran Paul <brianp@vmware.com> Reviewed-by: Zack Rusin <zackr@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@gmail.com> | 29 August 2013, 23:03:39 UTC |
| 1dcff83 | Dave Airlie | 29 August 2013, 23:02:57 UTC | Merge tag 'drm-intel-fixes-2013-08-30' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just a one-line patch to fix a black screen issue on rare ivb machines, cc: stable. Normally I'd just shovel this into the -next pull request this late in the -rc cycle, but Linus was making noises about not getting real fixes which are cc: stable. So here we go ;-) * tag 'drm-intel-fixes-2013-08-30' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: ivb: fix edp voltage swing reg val | 29 August 2013, 23:02:57 UTC |
| 77fa4cb | Imre Deak | 23 August 2013, 20:50:23 UTC | drm/i915: ivb: fix edp voltage swing reg val Fix the typo introduced in commit 1a2eb4604b85c5efb343da8a4dcf41288fcfca85 Author: Keith Packard <keithp@keithp.com> Date: Wed Nov 16 16:26:07 2011 -0800 drm/i915: Hook up Ivybridge eDP This fixes eDP link-training failures and cases where all voltage swing /pre-emphasis levels were tried and failed during clock recovery and - as a fallback - we go on to do channel equalization with the last voltage swing/pre-emphasis level which will succeed. Both issues can lead to a blank screen. v2: - improve commit message CC: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64880 Tested-by: Jeremy Moles <cubicool@gmail.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 29 August 2013, 22:07:27 UTC |
| f8ab658 | Barry Song | 06 August 2013, 05:37:14 UTC | arm: prima2: drop nr_irqs in mach as we moved to linear irqdomain we don't need nr_irqs in machine any more after we move to linear irqdomain for sirfsoc irqchip, so drop them. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net> | 29 August 2013, 16:48:36 UTC |
| 29eb51a | Barry Song | 06 August 2013, 05:37:13 UTC | irqchip: sirf: move from legacy mode to linear irqdomain the series of patches for irqdomain core in 3.11 has broken sirf irq which uses legacy mapping. all users fail in the new kernel while setupping irq. this patch moves to linear irqdomain and drop old legacy irqdomain codes since we don't need it any more, and at the same time, it also fixes the broken interrupts of sirfsoc in 3.11. on the other hand, we actually only have 64 interrupt sources for prima2 and atlas6, but there are 128 interrupt souces for marco which uses GIC. in the legacy codes, sirf gpio also uses legacy irqdomain, so to make gpio interrupt mapping not depend on the prima2/atlas6/marco an use unified marco,we enlarge prima2/atlas6 interrupt number to 128. here we don't need this workaround any more as sirf gpio also moved to linear mode before. so we move SIRFSOC_NUM_IRQS back to 64 too. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net> | 29 August 2013, 16:48:32 UTC |
| fa46c79 | Mischa Jonker | 29 August 2013, 16:29:40 UTC | Input: i8042 - disable the driver on ARC platforms It causes crashes when enabled, and we don't have such a peripheral anyway on ARC platforms. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 29 August 2013, 16:32:26 UTC |
| bb78a92 | Hugh Dickins | 28 August 2013, 23:31:23 UTC | cgroup: fix rmdir EBUSY regression in 3.11 On 3.11-rc we are seeing cgroup directories left behind when they should have been removed. Here's a trivial reproducer: cd /sys/fs/cgroup/memory mkdir parent parent/child; rmdir parent/child parent rmdir: failed to remove `parent': Device or resource busy It's because cgroup_destroy_locked() (step 1 of destruction) leaves cgroup on parent's children list, letting cgroup_offline_fn() (step 2 of destruction) remove it; but step 2 is run by work queue, which may not yet have removed the children when parent destruction checks the list. Fix that by checking through a non-empty list of children: if every one of them has already been marked CGRP_DEAD, then it's safe to proceed: those children are invisible to userspace, and should not obstruct rmdir. (I didn't see any reason to keep the cgrp->children checks under the unrelated css_set_lock, so moved them out.) tj: Flattened nested ifs a bit and updated comment so that it's correct on both for-3.11-fixes and for-3.12. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> | 29 August 2013, 15:05:07 UTC |
| b22ce27 | Tejun Heo | 28 August 2013, 21:33:37 UTC | workqueue: cond_resched() after processing each work item If !PREEMPT, a kworker running work items back to back can hog CPU. This becomes dangerous when a self-requeueing work item which is waiting for something to happen races against stop_machine. Such self-requeueing work item would requeue itself indefinitely hogging the kworker and CPU it's running on while stop_machine would wait for that CPU to enter stop_machine while preventing anything else from happening on all other CPUs. The two would deadlock. Jamie Liu reports that this deadlock scenario exists around scsi_requeue_run_queue() and libata port multiplier support, where one port may exclude command processing from other ports. With the right timing, scsi_requeue_run_queue() can end up requeueing itself trying to execute an IO which is asked to be retried while another device has an exclusive access, which in turn can't make forward progress due to stop_machine. Fix it by invoking cond_resched() after executing each work item. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jamie Liu <jamieliu@google.com> References: http://thread.gmane.org/gmane.linux.kernel/1552567 Cc: stable@vger.kernel.org -- kernel/workqueue.c | 9 +++++++++ 1 file changed, 9 insertions(+) | 29 August 2013, 13:19:28 UTC |
| c95389b | Linus Torvalds | 29 August 2013, 02:31:33 UTC | Merge branch 'akpm' (patches from Andrew Morton) Merge fixes from Andrew Morton: "Five fixes. err, make that six. let me try again" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: fs/ocfs2/super.c: Use bigger nodestr to accomodate 32-bit node numbers memcg: check that kmem_cache has memcg_params before accessing it drivers/base/memory.c: fix show_mem_removable() to handle missing sections IPC: bugfix for msgrcv with msgtyp < 0 Omnikey Cardman 4000: pull in ioctl.h in user header timer_list: correct the iterator for timer_list | 29 August 2013, 02:31:33 UTC |
| 49fa814 | Goldwyn Rodrigues | 28 August 2013, 23:35:21 UTC | fs/ocfs2/super.c: Use bigger nodestr to accomodate 32-bit node numbers While using pacemaker/corosync, the node numbers are generated using IP address as opposed to serial node number generation. This may not fit in a 8-byte string. Use a bigger string to print the complete node number. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 August 2013, 02:26:38 UTC |
| 6f6b895 | Andrey Vagin | 28 August 2013, 23:35:20 UTC | memcg: check that kmem_cache has memcg_params before accessing it If the system had a few memory groups and all of them were destroyed, memcg_limited_groups_array_size has non-zero value, but all new caches are created without memcg_params, because memcg_kmem_enabled() returns false. We try to enumirate child caches in a few places and all of them are potentially dangerous. For example my kernel is compiled with CONFIG_SLAB and it crashed when I tryed to mount a NFS share after a few experiments with kmemcg. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff8118166a>] do_tune_cpucache+0x8a/0xd0 PGD b942a067 PUD b999f067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: fscache(+) ip6table_filter ip6_tables iptable_filter ip_tables i2c_piix4 pcspkr virtio_net virtio_balloon i2c_core floppy CPU: 0 PID: 357 Comm: modprobe Not tainted 3.11.0-rc7+ #59 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800b9f98240 ti: ffff8800ba32e000 task.ti: ffff8800ba32e000 RIP: 0010:[<ffffffff8118166a>] [<ffffffff8118166a>] do_tune_cpucache+0x8a/0xd0 RSP: 0018:ffff8800ba32fb70 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000000 RSI: ffff8800b9f98910 RDI: 0000000000000246 RBP: ffff8800ba32fba0 R08: 0000000000000002 R09: 0000000000000004 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000010 R13: 0000000000000008 R14: 00000000000000d0 R15: ffff8800375d0200 FS: 00007f55f1378740(0000) GS:ffff8800bfa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f24feba57a0 CR3: 0000000037b51000 CR4: 00000000000006f0 Call Trace: enable_cpucache+0x49/0x100 setup_cpu_cache+0x215/0x280 __kmem_cache_create+0x2fa/0x450 kmem_cache_create_memcg+0x214/0x350 kmem_cache_create+0x2b/0x30 fscache_init+0x19b/0x230 [fscache] do_one_initcall+0xfa/0x1b0 load_module+0x1c41/0x26d0 SyS_finit_module+0x86/0xb0 system_call_fastpath+0x16/0x1b Signed-off-by: Andrey Vagin <avagin@openvz.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Glauber Costa <glommer@openvz.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 August 2013, 02:26:38 UTC |
| 21ea9f5 | Russ Anderson | 28 August 2013, 23:35:18 UTC | drivers/base/memory.c: fix show_mem_removable() to handle missing sections "cat /sys/devices/system/memory/memory*/removable" crashed the system. The problem is that show_mem_removable() is passing a bad pfn to is_mem_section_removable(), which causes if (!node_online(page_to_nid(page))) to blow up. Why is it passing in a bad pfn? The reason is that show_mem_removable() will loop sections_per_block times. sections_per_block is 16, but mem->section_count is 8, indicating holes in this memory block. Checking that the memory section is present before checking to see if the memory section is removable fixes the problem. harp5-sys:~ # cat /sys/devices/system/memory/memory*/removable 0 1 1 1 1 1 1 1 1 1 1 1 1 1 BUG: unable to handle kernel paging request at ffffea00c3200000 IP: [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 PGD 83ffd4067 PUD 37bdfce067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: autofs4 binfmt_misc rdma_ucm rdma_cm iw_cm ib_addr ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_cm ib_uverbs ib_umad iw_cxgb3 cxgb3 mdio mlx4_en mlx4_ib ib_sa mlx4_core ib_mthca ib_mad ib_core fuse nls_iso8859_1 nls_cp437 vfat fat joydev loop hid_generic usbhid hid hwperf(O) numatools(O) dm_mod iTCO_wdt ipv6 iTCO_vendor_support igb i2c_i801 ioatdma i2c_algo_bit ehci_pci pcspkr lpc_ich i2c_core ehci_hcd ptp sg mfd_core dca rtc_cmos pps_core mperf button xhci_hcd sd_mod crc_t10dif usbcore usb_common scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh gru(O) xvma(O) xfs crc32c libcrc32c thermal sata_nv processor piix mptsas mptscsih scsi_transport_sas mptbase megaraid_sas fan thermal_sys hwmon ext3 jbd ata_piix ahci libahci libata scsi_mod CPU: 4 PID: 5991 Comm: cat Tainted: G O 3.11.0-rc5-rja-uv+ #10 Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013 task: ffff88081f034580 ti: ffff880820022000 task.ti: ffff880820022000 RIP: 0010:[<ffffffff81117ed1>] [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 RSP: 0018:ffff880820023df8 EFLAGS: 00010287 RAX: 0000000000040000 RBX: ffffea00c3200000 RCX: 0000000000000004 RDX: ffffea00c30b0000 RSI: 00000000001c0000 RDI: ffffea00c3200000 RBP: ffff880820023e38 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea00c33c0000 R13: 0000160000000000 R14: 6db6db6db6db6db7 R15: 0000000000000001 FS: 00007ffff7fb2700(0000) GS:ffff88083fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffea00c3200000 CR3: 000000081b954000 CR4: 00000000000407e0 Call Trace: show_mem_removable+0x41/0x70 dev_attr_show+0x2a/0x60 sysfs_read_file+0xf7/0x1c0 vfs_read+0xc8/0x130 SyS_read+0x5d/0xa0 system_call_fastpath+0x16/0x1b Signed-off-by: Russ Anderson <rja@sgi.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 August 2013, 02:26:38 UTC |
| 368ae53 | Svenning Sørensen | 28 August 2013, 23:35:17 UTC | IPC: bugfix for msgrcv with msgtyp < 0 According to 'man msgrcv': "If msgtyp is less than 0, the first message of the lowest type that is less than or equal to the absolute value of msgtyp shall be received." Bug: The kernel only returns a message if its type is 1; other messages with type < abs(msgtype) will never get returned. Fix: After having traversed the list to find the first message with the lowest type, we need to actually return that message. This regression was introduced by commit daaf74cf0867 ("ipc: refactor msg list search into separate function") Signed-off-by: Svenning Soerensen <sss@secomea.dk> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 August 2013, 02:26:38 UTC |
| aaaafb7 | Mike Frysinger | 28 August 2013, 23:35:16 UTC | Omnikey Cardman 4000: pull in ioctl.h in user header This file uses the ioctl helpers (_IOR/_IOW/etc...), so include ioctl.h for the definitions. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 August 2013, 02:26:38 UTC |
| 84a78a6 | Nathan Zimmer | 28 August 2013, 23:35:14 UTC | timer_list: correct the iterator for timer_list Correct an issue with /proc/timer_list reported by Holger. When reading from the proc file with a sufficiently small buffer, 2k so not really that small, there was one could get hung trying to read the file a chunk at a time. The timer_list_start function failed to account for the possibility that the offset was adjusted outside the timer_list_next. Signed-off-by: Nathan Zimmer <nzimmer@sgi.com> Reported-by: Holger Hans Peter Freyther <holger@freyther.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Berke Durak <berke.durak@xiphos.com> Cc: Jeff Layton <jlayton@redhat.com> Tested-by: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> # 3.10.x Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 August 2013, 02:26:38 UTC |
| 9847423 | Waiman Long | 29 August 2013, 01:24:59 UTC | vfs: make the dentry cache use the lockref infrastructure This just replaces the dentry count/lock combination with the lockref structure that contains both a count and a spinlock, and does the mechanical conversion to use the lockref infrastructure. There are no semantic changes here, it's purely syntactic. The reference lockref implementation uses the spinlock exactly the same way that the old dcache code did, and the bulk of this patch is just expanding the internal "d_count" use in the dcache code to use "d_lockref.count" instead. This is purely preparation for the real change to make the reference count updates be lockless during the 3.12 merge window. [ As with the previous commit, this is a rewritten version of a concept originally from Waiman, so credit goes to him, blame for any errors goes to me. Waiman's patch had some semantic differences for taking advantage of the lockless update in dget_parent(), while this patch is intentionally a pure search-and-replace change with no semantic changes. - Linus ] Signed-off-by: Waiman Long <Waiman.Long@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 August 2013, 01:24:59 UTC |
| 0f8f2aa | Waiman Long | 29 August 2013, 01:13:26 UTC | Add new lockref infrastructure reference implementation This introduces a new "lockref" structure that supports the concept of lockless updates of reference counts that still honor an attached spinlock. NOTE! This reference implementation is not the optimized lockless version, rather it is the fallback implementation using standard spinlocks. The actual optimized versions will be merged into 3.12, but I wanted to get the infrastructure in place and document the new interfaces. [ Also note that this particular commit is drastically cut-down minimal version of the original patch by Waiman. In order to properly credit the original author I'm marking Waiman as the author here, but in the end this patch bears little resemblance to the patch by Waiman. So blame any errors on me editing things down to the point where I can introduce the infrastructure before the merge window for 3.12 actually opens. - Linus ] Signed-off-by: Waiman Long <Waiman.Long@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 August 2013, 01:13:27 UTC |
| 347e223 | Trond Myklebust | 28 August 2013, 17:35:13 UTC | SUNRPC: Fix memory corruption issue on 32-bit highmem systems Some architectures, such as ARM-32 do not return the same base address when you call kmap_atomic() twice on the same page. This causes problems for the memmove() call in the XDR helper routine "_shift_data_right_pages()", since it defeats the detection of overlapping memory ranges, and has been seen to corrupt memory. The fix is to distinguish between the case where we're doing an inter-page copy or not. In the former case of we know that the memory ranges cannot possibly overlap, so we can additionally micro-optimise by replacing memmove() with memcpy(). Reported-by: Mark Young <MYoung@nvidia.com> Reported-by: Matt Craighead <mcraighead@nvidia.com> Cc: Bruce Fields <bfields@fieldses.org> Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Matt Craighead <mcraighead@nvidia.com> | 28 August 2013, 19:43:43 UTC |
| f0cc6ff | Linus Torvalds | 28 August 2013, 16:18:05 UTC | Revert "fs: Allow unprivileged linkat(..., AT_EMPTY_PATH) aka flink" This reverts commit bb2314b47996491bbc5add73633905c3120b6268. It wasn't necessarily wrong per se, but we're still busily discussing the exact details of this all, so I'm going to revert it for now. It's true that you can already do flink() through /proc and that flink() isn't new. But as Brad Spengler points out, some secure environments do not mount proc, and flink adds a new interface that can avoid path lookup of the source for those kinds of environments. We may re-do this (and even mark it for stable backporting back in 3.11 and possibly earlier) once the whole discussion about the interface is done. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 August 2013, 16:18:05 UTC |
| fb61549 | Takashi Iwai | 27 August 2013, 10:03:01 UTC | ALSA: opti9xx: Fix conflicting driver object name The recent commit to delay the release of kobject triggered NULL dereferences of opti9xx drivers. The cause is that all snd-opti92x-ad1848, snd-opti92x-cs4231 and snd-opti93x drivers register the PnP card driver with the very same name, and also snd-opti92x-ad1848 and -cs4231 drivers register the ISA driver with the same name, too. When these drivers are built in, quick "register-release-and-re-register" actions occur, and this results in Oops because of the same name is assigned to the kobject. The fix is simply to assign individual names. As a bonus, by using KBUILD_MODNAME, the patch reduces more lines than it adds. The fix is based on the suggestion by Russell King. Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 28 August 2013, 06:22:16 UTC |
| fa8218d | Linus Torvalds | 27 August 2013, 17:10:30 UTC | Merge tag 'regmap-v3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "Two changes here: - Fix a bug in the rbtree code which could cause it to create two different cache entries for the same register by adding a single register at a time to the cache. This isn't awesome for performance but it's non-invasive which we need for this late in the release cycle and the I/O costs we're trying to avoid are high. - Add another header used in the !CONFIG_REGMAP stubs where we had been relying on implicit inclusion" * tag 'regmap-v3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: rbtree: Fix overlapping rbnodes. regmap: Add another missing header for !CONFIG_REGMAP stubs | 27 August 2013, 17:10:30 UTC |
| 0c6b5c5 | Linus Torvalds | 27 August 2013, 17:09:22 UTC | Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here are 3 bug fixes that should probably go into 3.11 since I'm also tagging them for stable. Once fixes our old /proc/powerpc/lparcfg file which provides partition informations when running under our hypervisor and also acts as a user-triggerable Oops when hot :-( The other two respectively are a one liner to fix a HVSI protocol handshake problem causing the console to fail to show up on a bunch of machines until we reach userspace, which I deem annoying enough to warrant going to stable, and a nasty gcc miscompile causing us to pass virtual instead of physical addresses to the firmware under some circumstances" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/hvsi: Increase handshake timeout from 200ms to 400ms. powerpc: Work around gcc miscompilation of __pa() on 64-bit powerpc: Don't Oops when accessing /proc/powerpc/lparcfg without hypervisor | 27 August 2013, 17:09:22 UTC |
| 6dec97d | Cyrill Gorcunov | 27 August 2013, 08:37:18 UTC | mm: move_ptes -- Set soft dirty bit depending on pte type Dave reported corrupted swap entries | [ 4588.541886] swap_free: Unused swap offset entry 00002d15 | [ 4588.541952] BUG: Bad page map in process trinity-kid12 pte:005a2a80 pmd:22c01f067 and Hugh pointed that in move_ptes _PAGE_SOFT_DIRTY bit set regardless the type of entry pte consists of. The trick here is that when we carry soft dirty status in swap entries we are to use _PAGE_SWP_SOFT_DIRTY instead, because this is the only place in pte which can be used for own needs without intersecting with bits owned by swap entry type/offset. Reported-and-tested-by: Dave Jones <davej@redhat.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Analyzed-by: Hugh Dickins <hughd@google.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 27 August 2013, 16:36:17 UTC |
| d220980 | Eugene Surovegin | 26 August 2013, 18:53:32 UTC | powerpc/hvsi: Increase handshake timeout from 200ms to 400ms. This solves a problem observed in kexec'ed kernel where 200ms timeout is too short and bootconsole fails to initialize. Console did eventually become workable but much later into the boot process. Observed timeout was around 260ms, but I decided to make it a little bigger for more reliability. This has been tested on Power7 machine with Petitboot as a primary bootloader and PowerNV firmware. CC: <stable@vger.kernel.org> Signed-off-by: Eugene Surovegin <surovegin@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 27 August 2013, 06:59:56 UTC |
| bdbc29c | Paul Mackerras | 27 August 2013, 06:07:49 UTC | powerpc: Work around gcc miscompilation of __pa() on 64-bit On 64-bit, __pa(&static_var) gets miscompiled by recent versions of gcc as something like: addis 3,2,.LANCHOR1+4611686018427387904@toc@ha addi 3,3,.LANCHOR1+4611686018427387904@toc@l This ends up effectively ignoring the offset, since its bottom 32 bits are zero, and means that the result of __pa() still has 0xC in the top nibble. This happens with gcc 4.8.1, at least. To work around this, for 64-bit we make __pa() use an AND operator, and for symmetry, we make __va() use an OR operator. Using an AND operator rather than a subtraction ends up with slightly shorter code since it can be done with a single clrldi instruction, whereas it takes three instructions to form the constant (-PAGE_OFFSET) and add it on. (Note that MEMORY_START is always 0 on 64-bit.) CC: <stable@vger.kernel.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 27 August 2013, 06:59:30 UTC |
| f5f6cbb | Benjamin Herrenschmidt | 27 August 2013, 06:38:33 UTC | powerpc: Don't Oops when accessing /proc/powerpc/lparcfg without hypervisor /proc/powerpc/lparcfg is an ancient facility (though still actively used) which allows access to some informations relative to the partition when running underneath a PAPR compliant hypervisor. It makes no sense on non-pseries machines. However, currently, not only can it be created on these if the kernel has pseries support, but accessing it on such a machine will crash due to trying to do hypervisor calls. In fact, it should also not do HV calls on older pseries that didn't have an hypervisor either. Finally, it has the plumbing to be a module but is a "bool" Kconfig option. This fixes the whole lot by turning it into a machine_device_initcall that is only created on pseries, and adding the necessary hypervisor check before calling the H_GET_EM_PARMS hypercall CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 27 August 2013, 06:38:33 UTC |
| 9b50683 | Linus Torvalds | 27 August 2013, 02:23:29 UTC | Merge tag 'usb-3.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB bugfix from Greg KH: "Here is a single bugfix that resolves the "can not build the OHCI driver with CONFIG_PM disabled" problem that lots of people have been reporting with 3.11-rc7. Sorry about that one, it missed my build tests, and it seems, a number of others as well. Thank goodness for Guenter :)" * tag 'usb-3.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: OHCI: fix build error related to ohci_suspend/resume | 27 August 2013, 02:23:29 UTC |
| 83c425d | Linus Torvalds | 27 August 2013, 02:22:49 UTC | Merge tag 'jfs-3.11-rc8' of git://github.com/kleikamp/linux-shaggy Pull jfs fix from Dave Kleikamp: "One JFS patch to fix an incompatibility with NFSv4 resulting in the nfs client reporting a readdir loop" * tag 'jfs-3.11-rc8' of git://github.com/kleikamp/linux-shaggy: jfs: fix readdir cookie incompatibility with NFSv4 | 27 August 2013, 02:22:49 UTC |
| d347404 | Alan Stern | 26 August 2013, 14:53:53 UTC | USB: OHCI: fix build error related to ohci_suspend/resume Commit 9a11899c5e69 (USB: OHCI: add missing PCI PM callbacks to ohci-pci.c) added missing ohci_suspend and ohci_resume callback pointers, but forgot that these callbacks are declared and defined only when CONFIG_PM is enabled. This patch adds a preprocessor conditional to avoid build errors when PM is disabled. Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Meelis Roos <mroos@linux.ee>, Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 26 August 2013, 22:22:15 UTC |
| ed06349 | Mag | 26 August 2013, 07:22:01 UTC | Input: xpad - add signature for Razer Onza Classic Edition Signed-off-by: Nol "Mag" Archinova <magissia@magissia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 26 August 2013, 07:35:01 UTC |
| d8dfad3 | Linus Torvalds | 26 August 2013, 00:43:22 UTC | Linux 3.11-rc7 | 26 August 2013, 00:43:22 UTC |
| c1c008c | Linus Torvalds | 25 August 2013, 19:44:15 UTC | Merge tag 'staging-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are two tiny staging tree fixes (well, one is for an iio driver, but those updates come through the staging tree due to dependancies) One fixes a problem with an IIO driver, and the other fixes a bug in the comedi driver core" * tag 'staging-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: bug-fix NULL pointer dereference on failed attach iio: adjd_s311: Fix non-scan mode data read | 25 August 2013, 19:44:15 UTC |
| 5e25e4f | Linus Torvalds | 25 August 2013, 19:43:44 UTC | Merge tag 'usb-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are two USB fixes for 3.11-rc7 One fixes a reported regression in the OHCI driver, and the other fixes a reported build breakage in the USB phy drivers" * tag 'usb-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: phy: fix build breakage USB: OHCI: add missing PCI PM callbacks to ohci-pci.c | 25 August 2013, 19:43:44 UTC |
| 1b4757e | Linus Torvalds | 25 August 2013, 19:41:37 UTC | Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm Pull ARM fixes from Russell King: "This round of fixes is smaller than previous: a couple more updates for the security fixes, and a one-liner kexec fix" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7816/1: CONFIG_KUSER_HELPERS: fix help text ARM: 7815/1: kexec: offline non panic CPUs on Kdump panic ARM: 7819/1: fiq: Cast the first argument of flush_icache_range() | 25 August 2013, 19:41:37 UTC |
| 4d4323e | Linus Torvalds | 25 August 2013, 19:25:38 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Assorted fixes from the last week or so" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: collect_mounts() should return an ERR_PTR bfs: iget_locked() doesn't return an ERR_PTR efs: iget_locked() doesn't return an ERR_PTR() proc: kill the extra proc_readfd_common()->dir_emit_dots() cope with potentially long ->d_dname() output for shmem/hugetlb | 25 August 2013, 19:25:38 UTC |
| acc0444 | Matteo Delfino | 15 August 2013, 07:09:41 UTC | Input: elantech - fix packet check for v3 and v4 hardware The signatures of v3 and v4 packets change depending on the value of a hardware flag called 'crc_enabled'. The packet type detection must change accordingly. This patch also restores a consistency check for v4 packets inadvertently removed by commit: 9eebed7de660c0b5ab129a9de4f89d20b60de68c Input: elantech - fix for newer hardware versions (v7) A note about the naming convention: v3 hardware is associated with IC body v5 while v4 hardware is associated with IC body v6 and v7. The above commit refers to IC body v7, not to v7 hardware. Tested on Samsung NP730U3E (fw = 0x675f05, ICv7, crc_enabled = 1) Tested-by: Giovanni Frigione <gio.frigione@gmail.com> Signed-off-by: Matteo Delfino <kendatsuba@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 25 August 2013, 00:52:35 UTC |
| f41a64e | Ping Cheng | 21 August 2013, 16:14:49 UTC | Input: wacom - add support for 0x300 and 0x301 Tested-by: Arjuna Rao Chavala <arjunaraoc@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 25 August 2013, 00:44:46 UTC |
| 8495e9c | Linus Torvalds | 24 August 2013, 18:34:33 UTC | Merge tag 'acpi-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "I really hoped that it wouldn't be necessary to change anything in ACPI at this point, but it turns out that we need to revert one more ACPI video commit causing trouble. This reverts a change in the ACPI video driver that caused the ACPI backlight initialization to be carried out even if acpi_backlight=vendor is passed in the kernel command line which turns out to break things at least on one system" * tag 'acpi-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / video: Always call acpi_video_init_brightness() on init" | 24 August 2013, 18:34:33 UTC |
| 5befb98 | Linus Torvalds | 24 August 2013, 18:33:21 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of small bug fixes for lpfc and zfcp and a fix for a fairly nasty bug in sg where a process which cancels I/O completes in a kernel thread which would then try to write back to the now gone userspace and end up writing to a random kernel address instead" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] zfcp: remove access control tables interface (keep sysfs files) [SCSI] zfcp: fix schedule-inside-lock in scsi_device list loops [SCSI] zfcp: fix lock imbalance by reworking request queue locking [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal [SCSI] lpfc: Don't force CONFIG_GENERIC_CSUM on | 24 August 2013, 18:33:21 UTC |
| b0f55f2 | Joern Rennecke | 24 August 2013, 06:33:06 UTC | ARC: [lib] strchr breakage in Big-endian configuration For a search buffer, 2 byte aligned, strchr() was returning pointer outside of buffer (buf - 1) ------------->8---------------- // Input buffer (default 4 byte aigned) char *buffer = "1AA_"; // actual search start (to mimick 2 byte alignment) char *current_line = &(buffer[2]); // Character to search for char c = 'A'; char *c_pos = strchr(current_line, c); printf("%s\n", c_pos) --> 'AA_' as oppose to 'A_' ------------->8---------------- Reported-by: Anton Kolesov <Anton.Kolesov@synopsys.com> Debugged-by: Anton Kolesov <Anton.Kolesov@synopsys.com> Cc: <stable@vger.kernel.org> # [3.9 and 3.10] Cc: Noam Camus <noamc@ezchip.com> Signed-off-by: Joern Rennecke <joern.rennecke@embecosm.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 24 August 2013, 18:24:53 UTC |
| 52e220d | Dan Carpenter | 14 August 2013, 09:44:39 UTC | VFS: collect_mounts() should return an ERR_PTR This should actually be returning an ERR_PTR on error instead of NULL. That was how it was designed and all the callers expect it. [AV: actually, that's what "VFS: Make clone_mnt()/copy_tree()/collect_mounts() return errors" missed - originally collect_mounts() was expected to return NULL on failure] Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 24 August 2013, 16:10:29 UTC |
| 821ff77 | Dan Carpenter | 14 August 2013, 09:51:03 UTC | bfs: iget_locked() doesn't return an ERR_PTR iget_locked() returns a NULL on error, it doesn't return an ERR_PTR. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 24 August 2013, 16:10:22 UTC |
| 136eefa | Dan Carpenter | 14 August 2013, 09:49:40 UTC | efs: iget_locked() doesn't return an ERR_PTR() The iget_locked() function returns NULL on error and never an ERR_PTR. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 24 August 2013, 16:10:22 UTC |
| a5a1955 | Oleg Nesterov | 24 August 2013, 15:14:34 UTC | proc: kill the extra proc_readfd_common()->dir_emit_dots() proc_readfd_common() does dir_emit_dots() twice in a row, we need to do this only once. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 24 August 2013, 16:10:22 UTC |
| 118b230 | Al Viro | 24 August 2013, 16:08:17 UTC | cope with potentially long ->d_dname() output for shmem/hugetlb dynamic_dname() is both too much and too little for those - the output may be well in excess of 64 bytes dynamic_dname() assumes to be enough (thanks to ashmem feeding really long names to shmem_file_setup()) and vsnprintf() is an overkill for those guys. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 24 August 2013, 16:10:17 UTC |
| 89b53e5 | Linus Torvalds | 23 August 2013, 17:59:42 UTC | Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "This contains three commits all of which are updates for specific devices which aren't too widespread. Pretty limited scope and nothing too interesting or dangerous" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_fsl: save irqs while coalescing libata: apply behavioral quirks to sil3826 PMP sata, highbank: fix ordering of SGPIO signals | 23 August 2013, 17:59:42 UTC |
| e2982a0 | Linus Torvalds | 23 August 2013, 17:58:50 UTC | Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "A late fix for cgroup. This fixes a behavior regression visible to userland which was created by a commit merged during -rc1. While the behavior change isn't too likely to be noticeable, the fix is relatively low risk and we'll need to backport it through -stable anyway if the bug gets released" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: fix a regression in validating config change | 23 August 2013, 17:58:50 UTC |
| f07823e | Linus Torvalds | 23 August 2013, 17:46:28 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Ben was on holidays for a week so a few nouveau regression fixes backed up, but they all seem necessary. Otherwise one i915 and one gma500 fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: gma500: Fix SDVO turning off randomly drm/nv04/disp: fix framebuffer pin refcounting drm/nouveau/mc: fix race condition between constructor and request_irq() drm/nouveau: fix reclocking on nv40 drm/nouveau/ltcg: fix allocating memory as free drm/nouveau/ltcg: fix ltcg memory initialization after suspend drm/nouveau/fb: fix null derefs in nv49 and nv4e init drm/i915: Invalidate TLBs for the rings after a reset | 23 August 2013, 17:46:28 UTC |
| 52d5b9a | Anatolij Gustschin | 21 August 2013, 15:43:31 UTC | usb: phy: fix build breakage Commit 94ae9843 (usb: phy: rename all phy drivers to phy-$name-usb.c) renamed drivers/usb/phy/otg_fsm.h to drivers/usb/phy/phy-fsm-usb.h but changed drivers/usb/phy/phy-fsm-usb.c to include not existing "phy-otg-fsm.h" instead of new "phy-fsm-usb.h". This breaks building: ... drivers/usb/phy/phy-fsm-usb.c:32:25: fatal error: phy-otg-fsm.h: No such file or directory compilation terminated. make[3]: *** [drivers/usb/phy/phy-fsm-usb.o] Error 1 This commit also missed to modify drivers/usb/phy/phy-fsl-usb.h to include new "phy-fsm-usb.h" instead of "otg_fsm.h" resulting in another build breakage: ... In file included from drivers/usb/phy/phy-fsl-usb.c:46:0: drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or directory compilation terminated. make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1 Fix both issues. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: stable <stable@vger.kernel.org> # 3.10+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 23 August 2013, 17:41:46 UTC |
| 9a11899 | Alan Stern | 21 August 2013, 14:33:17 UTC | USB: OHCI: add missing PCI PM callbacks to ohci-pci.c Commit c1117afb8589 (USB: OHCI: make ohci-pci a separate driver) neglected to preserve the entries for the pci_suspend and pci_resume driver callbacks. As a result, OHCI controllers don't work properly during suspend and after hibernation. This patch adds the missing callbacks to the driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Steve Cotton <steve@s.cotton.clara.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 23 August 2013, 17:41:46 UTC |
| 3955dfa | Ian Abbott | 23 August 2013, 11:37:17 UTC | staging: comedi: bug-fix NULL pointer dereference on failed attach Commit dcd7b8bd63cb81c5b973bf86510ca3c80bbbd162 ("staging: comedi: put module _after_ detach" by myself) reversed a couple of calls in `comedi_device_attach()` when recovering from an error returned by the low-level driver's 'attach' handler. Unfortunately, that introduced a NULL pointer dereference bug as `dev->driver` is NULL after the call to `comedi_device_detach()`. We still have a pointer to the low-level comedi driver structure in the `driv` variable, so use that instead. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 23 August 2013, 17:31:47 UTC |
| 41a00f7 | Linus Torvalds | 23 August 2013, 16:54:21 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Merge networking fixes from David Miller: 1) Revert Johannes Berg's genetlink locking fix, because it causes regressions. Johannes and Pravin Shelar are working on fixing things properly. 2) Do not drop ipv6 ICMP messages without a redirected header option, they are legal. From Duan Jiong. 3) Missing error return propagation in probing of via-ircc driver. From Alexey Khoroshilov. 4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when initializing, from Peter Wu. 5) realtek phy driver programs wrong interrupt status bit, from Giuseppe CAVALLARO. 6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn. 7) Bridge code uses wrong bitmap length, from Toshiaki Makita. 8) SFC driver uses wrong indexes to look up MAC filters, from Ben Hutchings. 9) Don't pass stack buffers into usb control operations in hso driver, from Daniel Gimpelevich. 10) Multiple ipv6 fragmentation headers in one packet is illegal and such packets should be dropped, from Hannes Frederic Sowa. 11) When TCP sockets are "repaired" as part of checkpoint/restart, the timestamp field of SKBs need to be refreshed otherwise RTOs can be wildly off. From Andrey Vagin. 12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in hostp driver. From Dan Carpenter. 13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes it does. From Dan Carpenter. 14) Fix regression in wireless SME disconnects, from Johannes Berg. 15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from Jussi Kivilinna. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) ipv4: expose IPV4_DEVCONF ipv6: handle Redirect ICMP Message with no Redirected Header option be2net: fix disabling TX in be_close() Revert "genetlink: fix family dump race" hso: Fix stack corruption on some architectures hso: Earlier catch of error condition sfc: Fix lookup of default RX MAC filters when steered using ethtool bridge: Use the correct bit length for bitmap functions in the VLAN code packet: restore packet statistics tp_packets to include drops net: phy: rtl8211: fix interrupt on status link change r8169: remember WOL preferences on driver load via-ircc: don't return zero if via_ircc_open() failed macvtap: Ignore tap features when VNET_HDR is off macvtap: Correctly set tap features when IFF_VNET_HDR is disabled. macvtap: simplify usage of tap_features tcp: set timestamps for restored skb-s bnx2x: set VF DMAE when first function has 0 supported VFs bnx2x: Protect against VFs' ndos when SR-IOV is disabled bnx2x: prevent VF benign attentions bnx2x: Consider DCBX remote error ... | 23 August 2013, 16:54:21 UTC |
| 3db0d4d | Linus Torvalds | 23 August 2013, 16:52:32 UTC | Merge branch 'akpm' (patches from Andrew Morton) Merge fixes from Andrew Morton: "A few fixes. One is a licensing change and I don't do licensing, so please eyeball that one" Licensing eye-balled. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/lz4: correct the LZ4 license memcg: get rid of swapaccount leftovers nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error drivers/platform/olpc/olpc-ec.c: initialise earlier | 23 August 2013, 16:52:32 UTC |
| ee8a99b | Richard Laager | 22 August 2013, 23:35:47 UTC | lib/lz4: correct the LZ4 license The LZ4 code is listed as using the "BSD 2-Clause License". Signed-off-by: Richard Laager <rlaager@wiktel.com> Acked-by: Kyungsik Lee <kyungsik.lee@lge.com> Cc: Chanho Min <chanho.min@lge.com> Cc: Richard Yao <ryao@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ The 2-clause BSD can be just converted into GPL, but that's rude and pointless, so don't do it - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 23 August 2013, 16:51:22 UTC |
| 07555ac | Michal Hocko | 22 August 2013, 23:35:46 UTC | memcg: get rid of swapaccount leftovers The swapaccount kernel parameter without any values has been removed by commit a2c8990aed5a ("memsw: remove noswapaccount kernel parameter") but it seems that we didn't get rid of all the left overs. Make sure that menuconfig help text and kernel-parameters.txt are clear about value for the paramter and remove the stalled comment which is not very much useful on its own. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Gergely Risko <gergely@risko.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 23 August 2013, 16:51:22 UTC |
| 4bf93b5 | Vyacheslav Dubeyko | 22 August 2013, 23:35:45 UTC | nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection Fix the issue with improper counting number of flying bio requests for BIO_EOPNOTSUPP error detection case. The sb_nbio must be incremented exactly the same number of times as complete() function was called (or will be called) because nilfs_segbuf_wait() will call wail_for_completion() for the number of times set to sb_nbio: do { wait_for_completion(&segbuf->sb_bio_event); } while (--segbuf->sb_nbio > 0); Two functions complete() and wait_for_completion() must be called the same number of times for the same sb_bio_event. Otherwise, wait_for_completion() will hang or leak. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 23 August 2013, 16:51:22 UTC |
| 2df37a1 | Vyacheslav Dubeyko | 22 August 2013, 23:35:44 UTC | nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error Remove double call of bio_put() in nilfs_end_bio_write() for the case of BIO_EOPNOTSUPP error detection. The issue was found by Dan Carpenter and he suggests first version of the fix too. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 23 August 2013, 16:51:22 UTC |
| 93dbc1b | Daniel Drake | 22 August 2013, 23:35:43 UTC | drivers/platform/olpc/olpc-ec.c: initialise earlier Being a low-level component, various drivers (e.g. olpc-battery) assume that it is ok to communicate with the OLPC Embedded Controller during probe. Therefore the OLPC EC driver must be initialised before other drivers try to use it. This was the case until it was recently moved out of arch/x86 and restructured around commits ac2504151f5a ("Platform: OLPC: turn EC driver into a platform_driver") and 85f90cf6ca56 ("x86: OLPC: switch over to using new EC driver on x86"). Use arch_initcall so that olpc-ec is readied earlier, matching the previous behaviour. Fixes a regression introduced in Linux-3.6 where various drivers such as olpc-battery and olpc-xo1-sci failed to load due to an inability to communicate with the EC. The user-visible effect was a lack of battery monitoring, missing ebook/lid switch input devices, etc. Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: Andres Salomon <dilinger@queued.net> Cc: Paul Fox <pgf@laptop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 23 August 2013, 16:51:22 UTC |
| 4dd17ee | Dave Airlie | 23 August 2013, 08:52:37 UTC | Merge tag 'drm-intel-fixes-2013-08-23' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just one patch that soaked for quite a bit to fix a resume issue, resulting in gpu hangs (or worse) due to tlb containing garbage. * tag 'drm-intel-fixes-2013-08-23' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Invalidate TLBs for the rings after a reset | 23 August 2013, 08:52:37 UTC |
| 4a5a8aa | stephen hemminger | 22 August 2013, 04:09:47 UTC | ipv4: expose IPV4_DEVCONF IP sends device configuration (see inet_fill_link_af) as an array in the netlink information, but the indices in that array are not exposed to userspace through any current santized header file. It was available back in 2.6.32 (in /usr/include/linux/sysctl.h) but was broken by: commit 02291680ffba92e5b5865bc0c5e7d1f3056b80ec Author: Eric W. Biederman <ebiederm@xmission.com> Date: Sun Feb 14 03:25:51 2010 +0000 net ipv4: Decouple ipv4 interface parameters from binary sysctl numbers Eric was solving the sysctl problem but then the indices were re-exposed by a later addition of devconf support for IPV4 commit 9f0f7272ac9506f4c8c05cc597b7e376b0b9f3e4 Author: Thomas Graf <tgraf@infradead.org> Date: Tue Nov 16 04:32:48 2010 +0000 ipv4: AF_INET link address family Putting them in /usr/include/linux/ip.h seemed the logical match for the DEVCONF_ definitions for IPV6 in /usr/include/linux/ip6.h Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 August 2013, 03:30:15 UTC |
| c92a59e | Duan Jiong | 22 August 2013, 04:07:35 UTC | ipv6: handle Redirect ICMP Message with no Redirected Header option rfc 4861 says the Redirected Header option is optional, so the kernel should not drop the Redirect Message that has no Redirected Header option. In this patch, the function ip6_redirect_no_header() is introduced to deal with that condition. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> | 23 August 2013, 03:08:21 UTC |
| 6e1f997 | Sathya Perla | 22 August 2013, 06:53:41 UTC | be2net: fix disabling TX in be_close() commit fba875591 ("disable TX in be_close()") disabled TX in be_close() to protect be_xmit() from touching freed up queues in the AER recovery flow. But, TX must be disabled *before* cleaning up TX completions in the close() path, not after. This allows be_tx_compl_clean() to free up all TX-req skbs that were notified to the HW. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 August 2013, 02:58:23 UTC |
| 168cf0e | Rafael J. Wysocki | 22 August 2013, 21:31:38 UTC | Revert "ACPI / video: Always call acpi_video_init_brightness() on init" Revert commit c04c697 (ACPI / video: Always call acpi_video_init_brightness() on init), because it breaks eDP backlight at 1920x1080 on Acer Aspire S3 for Trevor Bortins. References: https://bugs.freedesktop.org/show_bug.cgi?id=68355 Reported-and-bisected-by: Trevor Bortins <enabfluw@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 22 August 2013, 21:39:02 UTC |
| 2266c68 | David S. Miller | 22 August 2013, 21:34:13 UTC | Merge branch 'sfc-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc Merge in a fix for RX MAC address filter programming bug in the sfc driver. Signed-off-by: David S. Miller <davem@davemloft.net> | 22 August 2013, 21:34:13 UTC |
| 2ca320e | Takashi Iwai | 22 August 2013, 07:55:36 UTC | ALSA: hda - Fix NULL dereference with CONFIG_SND_DYNAMIC_MINORS=n Without the dynamic minor assignment, HDMI codec may have less PCM instances than the number of pins, which eventually leads to Oops. Reported-by: Stratos Karafotis <stratosk@semaphore.gr> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 22 August 2013, 21:22:39 UTC |
| 9d47b38 | Johannes Berg | 21 August 2013, 14:08:02 UTC | Revert "genetlink: fix family dump race" This reverts commit 58ad436fcf49810aa006016107f494c9ac9013db. It turns out that the change introduced a potential deadlock by causing a locking dependency with netlink's cb_mutex. I can't seem to find a way to resolve this without doing major changes to the locking, so revert this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 August 2013, 20:24:02 UTC |
| 6a7492a | Linus Torvalds | 22 August 2013, 20:04:11 UTC | Merge branch 'linux-next' of git://cavan.codon.org.uk/platform-drivers-x86 Pull x86 platform driver fixes from Matthew Garrett: "Three trivial fixes - the first reverts a patch that's broken some other devices (again - I'm trying to figure out a clean way to implement this), the other two fix minor issues in the sony-laptop driver" * 'linux-next' of git://cavan.codon.org.uk/platform-drivers-x86: Revert "hp-wmi: Enable hotkeys on some systems" sony-laptop: Fix reporting of gfx_switch_status sony-laptop: return a negative error code in sonypi_compat_init() | 22 August 2013, 20:04:11 UTC |
| 1f8b766 | Linus Torvalds | 22 August 2013, 17:44:44 UTC | Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A handful of fixes for 3.11 are still trickling in. These are: - A couple of fixes for older OMAP platforms - Another few fixes for at91 (lateish due to European summer vacations) - A late-found problem with USB on Tegra, fix is to keep VBUS regulator on at all times - One fix for Exynos 5440 dealing with CPU detection - One MAINTAINERS update" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: always enable USB VBUS regulators ARM: davinci: nand: specify ecc strength ARM: OMAP: rx51: change musb mode to OTG ARM: OMAP2: fix musb usage for n8x0 MAINTAINERS: Update email address for Benoit Cousson ARM: at91/DT: fix at91sam9n12ek memory node ARM: at91: add missing uart clocks DT entries ARM: SAMSUNG: fix to support for missing cpu specific map_io ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port C | 22 August 2013, 17:44:44 UTC |
| 8351fcf | Linus Torvalds | 22 August 2013, 17:43:47 UTC | Merge tag 'devicetree-fixes-for-3.11' of git://sources.calxeda.com/kernel/linux Pull device tree fix from Rob Herring: "For DT unflattening, add missing memory initialization. This is needed for arches like PPC that use memblock_alloc. This appears to have been an issue for some time, but is a somewhat limited usecase of OF_DYNAMIC" * tag 'devicetree-fixes-for-3.11' of git://sources.calxeda.com/kernel/linux: of: fdt: fix memory initialization for expanded DT | 22 August 2013, 17:43:47 UTC |
| ee7075d | Linus Torvalds | 22 August 2013, 17:43:00 UTC | Merge tag 'dm-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "A patch to fix dm-cache-policy-mq's remove_mapping() conflict with sparc32" * tag 'dm-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: avoid conflicting remove_mapping() in mq policy | 22 August 2013, 17:43:00 UTC |
| 41aacc1 | Radu Caragea | 21 August 2013, 17:55:59 UTC | x86 get_unmapped_area: Access mmap_legacy_base through mm_struct member This is the updated version of df54d6fa5427 ("x86 get_unmapped_area(): use proper mmap base for bottom-up direction") that only randomizes the mmap base address once. Signed-off-by: Radu Caragea <sinaelgl@gmail.com> Reported-and-tested-by: Jeff Shorey <shoreyjeff@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Adrian Sendroiu <molecula2788@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 22 August 2013, 17:19:35 UTC |
| 5ea80f7 | Linus Torvalds | 22 August 2013, 16:13:06 UTC | Revert "x86 get_unmapped_area(): use proper mmap base for bottom-up direction" This reverts commit df54d6fa54275ce59660453e29d1228c2b45a826. The commit isn't necessarily wrong, but because it recalculates the random mmap_base every time, it seems to confuse user memory allocators that expect contiguous mmap allocations even when the mmap address isn't specified. In particular, the MATLAB Java runtime seems to be unhappy. See https://bugzilla.kernel.org/show_bug.cgi?id=60774 So we'll want to apply the random offset only once, and Radu has a patch for that. Revert this older commit in order to apply the other one. Reported-by: Jeff Shorey <shoreyjeff@gmail.com> Cc: Radu Caragea <sinaelgl@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 22 August 2013, 17:18:44 UTC |
| b5dc3c4 | Martin Peschke | 22 August 2013, 15:45:38 UTC | [SCSI] zfcp: remove access control tables interface (keep sysfs files) By popular demand, this patch brings back a couple of sysfs attributes removed by commit 663e0890e31cb85f0cca5ac1faaee0d2d52880b5 "[SCSI] zfcp: remove access control tables interface". The content has been irrelevant for years, but the files must be there forever for whatever user space tools that may rely on them. Since these files always return a constant value, a new stripped down show-macro was required. Otherwise build warnings would have been introduced. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> | 22 August 2013, 16:26:51 UTC |
| 924dd58 | Martin Peschke | 22 August 2013, 15:45:37 UTC | [SCSI] zfcp: fix schedule-inside-lock in scsi_device list loops BUG: sleeping function called from invalid context at kernel/workqueue.c:2752 in_atomic(): 1, irqs_disabled(): 1, pid: 360, name: zfcperp0.0.1700 CPU: 1 Not tainted 3.9.3+ #69 Process zfcperp0.0.1700 (pid: 360, task: 0000000075b7e080, ksp: 000000007476bc30) <snip> Call Trace: ([<00000000001165de>] show_trace+0x106/0x154) [<00000000001166a0>] show_stack+0x74/0xf4 [<00000000006ff646>] dump_stack+0xc6/0xd4 [<000000000017f3a0>] __might_sleep+0x128/0x148 [<000000000015ece8>] flush_work+0x54/0x1f8 [<00000000001630de>] __cancel_work_timer+0xc6/0x128 [<00000000005067ac>] scsi_device_dev_release_usercontext+0x164/0x23c [<0000000000161816>] execute_in_process_context+0x96/0xa8 [<00000000004d33d8>] device_release+0x60/0xc0 [<000000000048af48>] kobject_release+0xa8/0x1c4 [<00000000004f4bf2>] __scsi_iterate_devices+0xfa/0x130 [<000003ff801b307a>] zfcp_erp_strategy+0x4da/0x1014 [zfcp] [<000003ff801b3caa>] zfcp_erp_thread+0xf6/0x2b0 [zfcp] [<000000000016b75a>] kthread+0xf2/0xfc [<000000000070c9de>] kernel_thread_starter+0x6/0xc [<000000000070c9d8>] kernel_thread_starter+0x0/0xc Apparently, the ref_count for some scsi_device drops down to zero, triggering device removal through execute_in_process_context(), while the lldd error recovery thread iterates through a scsi device list. Unfortunately, execute_in_process_context() decides to immediately execute that device removal function, instead of scheduling asynchronous execution, since it detects process context and thinks it is safe to do so. But almost all calls to shost_for_each_device() in our lldd are inside spin_lock_irq, even in thread context. Obviously, schedule() inside spin_lock_irq sections is a bad idea. Change the lldd to use the proper iterator function, __shost_for_each_device(), in combination with required locking. Occurences that need to be changed include all calls in zfcp_erp.c, since those might be executed in zfcp error recovery thread context with a lock held. Other occurences of shost_for_each_device() in zfcp_fsf.c do not need to be changed (no process context, no surrounding locking). The problem was introduced in Linux 2.6.37 by commit b62a8d9b45b971a67a0f8413338c230e3117dff5 "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit". Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: stable@vger.kernel.org #2.6.37+ Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> | 22 August 2013, 16:24:02 UTC |
| d79ff14 | Martin Peschke | 22 August 2013, 15:45:36 UTC | [SCSI] zfcp: fix lock imbalance by reworking request queue locking This patch adds wait_event_interruptible_lock_irq_timeout(), which is a straight-forward descendant of wait_event_interruptible_timeout() and wait_event_interruptible_lock_irq(). The zfcp driver used to call wait_event_interruptible_timeout() in combination with some intricate and error-prone locking. Using wait_event_interruptible_lock_irq_timeout() as a replacement nicely cleans up that locking. This rework removes a situation that resulted in a locking imbalance in zfcp_qdio_sbal_get(): BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10 last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp] It was introduced by commit c2af7545aaff3495d9bf9a7608c52f0af86fb194 "[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit without a required lock being held. The problem occured when a special, non-SCSI I/O request was being submitted in process context, when the adapter's queues had been torn down. In this case the bug surfaced when the Fibre Channel port connection for a well-known address was closed during a concurrent adapter shut-down procedure, which is a rare constellation. This patch also fixes these warnings from the sparse tool (make C=1): drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in 'zfcp_qdio_sbal_check' - wrong count at exit drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in 'zfcp_qdio_sbal_get' - unexpected unlock Last but not least, we get rid of that crappy lock-unlock-lock sequence at the beginning of the critical section. It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: stable@vger.kernel.org #2.6.35+ Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> | 22 August 2013, 15:53:30 UTC |
| 30ca222 | Stephen Warren | 20 August 2013, 20:00:13 UTC | ARM: tegra: always enable USB VBUS regulators This fixes a regression exposed during the merge window by commit 9f310de "ARM: tegra: fix VBUS regulator GPIO polarity in DT"; namely that USB VBUS doesn't get turned on, so USB devices are not detected. This affects the internal USB port on TrimSlice (i.e. the USB->SATA bridge, to which the SSD is connected) and the external port(s) on Seaboard/ Springbank and Whistler. The Tegra DT as written in v3.11 allows two paths to enable USB VBUS: 1) Via the legacy DT binding for the USB controller; it can directly acquire a VBUS GPIO and activate it. 2) Via a regulator for VBUS, which is referenced by the new DT binding for the USB controller. Those two methods both use the same GPIO, and hence whichever of the USB controller and regulator gets probed first ends up owning the GPIO. In practice, the USB driver only supports path (1) above, since the patches to support the new USB binding are not present until v3.12:-( In practice, the regulator ends up being probed first and owning the GPIO. Since nothing enables the regulator (the USB driver code is not yet present), the regulator ends up being turned off. This originally caused no problem, because the polarity in the regulator definition was incorrect, so attempting to turn off the regulator actually turned it on, and everything worked:-( However, when testing the new USB driver code in v3.12, I noticed the incorrect polarity and fixed it in commit 9f310de "ARM: tegra: fix VBUS regulator GPIO polarity in DT". In the context of v3.11, this patch then caused the USB VBUS to actually turn off, which broke USB ports with VBUS control. I got this patch included in v3.11-rc1 since it fixed a bug in device tree (incorrect polarity specification), and hence was suitable to be included early in the rc series. I evidently did not test the patch at all, or correctly, in the context of v3.11, and hence did not notice the issue that I have explained above:-( Fix this by making the USB VBUS regulators always enabled. This way, if the regulator owns the GPIO, it will always be turned on, even if there is no USB driver code to request the regulator be turned on. Even ignoring this bug, this is a reasonable way to configure the HW anyway. If this patch is applied to v3.11, it will cause a couple pretty trivial conflicts in tegra20-{trimslice,seaboard}.dts when creating v3.12, since the context right above the added lines changed in patches destined for v3.12. Reported-by: Kyle McMartin <kmcmarti@redhat.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> | 22 August 2013, 04:36:19 UTC |
| e75dc67 | Daniel Gimpelevich | 21 August 2013, 08:43:19 UTC | hso: Fix stack corruption on some architectures As Sergei Shtylyov explained in the #mipslinux IRC channel: [Mon 2013-08-19 12:28:21 PM PDT] <headless> guys, are you sure it's not "DMA off stack" case? [Mon 2013-08-19 12:28:35 PM PDT] <headless> it's a known stack corruptor on non-coherent arches [Mon 2013-08-19 12:31:48 PM PDT] <DonkeyHotei> headless: for usb/ehci? [Mon 2013-08-19 12:34:11 PM PDT] <DonkeyHotei> headless: explain [Mon 2013-08-19 12:35:38 PM PDT] <headless> usb_control_msg() (or other such func) should not use buffer on stack. DMA from/to stack is prohibited [Mon 2013-08-19 12:35:58 PM PDT] <headless> and EHCI uses DMA on control xfers (as well as all the others) Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 August 2013, 03:47:59 UTC |
| 35e57e1 | Daniel Gimpelevich | 21 August 2013, 08:43:07 UTC | hso: Earlier catch of error condition There is no need to get an interface specification if we know it's the wrong one. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 August 2013, 03:47:59 UTC |
| 9e40127 | Wladislav Wiebe | 12 August 2013, 11:06:53 UTC | of: fdt: fix memory initialization for expanded DT Already existing property flags are filled wrong for properties created from initial FDT. This could cause problems if this DYNAMIC device-tree functions are used later, i.e. properties are attached/detached/replaced. Simply dumping flags from the running system show, that some initial static (not allocated via kzmalloc()) nodes are marked as dynamic. I putted some debug extensions to property_proc_show(..) : .. + if (OF_IS_DYNAMIC(pp)) + pr_err("DEBUG: xxx : OF_IS_DYNAMIC\n"); + if (OF_IS_DETACHED(pp)) + pr_err("DEBUG: xxx : OF_IS_DETACHED\n"); when you operate on the nodes (e.g.: ~$ cat /proc/device-tree/*some_node*) you will see that those flags are filled wrong, basically in most cases it will dump a DYNAMIC or DETACHED status, which is in not true. (BTW. this OF_IS_DETACHED is a own define for debug purposes which which just make a test_bit(OF_DETACHED, &x->_flags) If nodes are dynamic kernel is allowed to kfree() them. But it will crash attempting to do so on the nodes from FDT -- they are not allocated via kzmalloc(). Signed-off-by: Wladislav Wiebe <wladislav.kw@gmail.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@nsn.com> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <rob.herring@calxeda.com> | 22 August 2013, 01:05:49 UTC |
| 6f1e120 | Guillaume Clement | 10 August 2013, 07:06:04 UTC | gma500: Fix SDVO turning off randomly Some Poulsbo cards seem to incorrectly report SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED instead of SDVO_CMD_STATUS_PENDING, which causes the display to be turned off. Signed-off-by: Guillaume Clement <gclement@baobob.org> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 22 August 2013, 00:37:49 UTC |
| 317b07b | Dave Airlie | 22 August 2013, 00:34:58 UTC | Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes regression fixes and null derefs and oops fixes. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nv04/disp: fix framebuffer pin refcounting drm/nouveau/mc: fix race condition between constructor and request_irq() drm/nouveau: fix reclocking on nv40 drm/nouveau/ltcg: fix allocating memory as free drm/nouveau/ltcg: fix ltcg memory initialization after suspend drm/nouveau/fb: fix null derefs in nv49 and nv4e init | 22 August 2013, 00:34:58 UTC |
| d936d2d | Linus Torvalds | 21 August 2013, 23:38:33 UTC | Merge tag 'stable/for-linus-3.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - On ARM did not have balanced calls to get/put_cpu. - Fix to make tboot + Xen + Linux correctly. - Fix events VCPU binding issues. - Fix a vCPU online race where IPIs are sent to not-yet-online vCPU. * tag 'stable/for-linus-3.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/smp: initialize IPI vectors before marking CPU online xen/events: mask events when changing their VCPU binding xen/events: initialize local per-cpu mask for all possible events x86/xen: do not identity map UNUSABLE regions in the machine E820 xen/arm: missing put_cpu in xen_percpu_init | 21 August 2013, 23:38:33 UTC |
| 0903391 | Linus Torvalds | 21 August 2013, 23:37:14 UTC | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fix from Ralf Baechle: "Just a single patch which fixes a special case in the MIPS FPU emulator which is always required, even on CPUs with FPU. There is the rare special case that an FPU (or certain other instructions) in a branch delay slot is causing an exception and then the branch instruction will need to be emulated by the kernel before resuming execution. This is working great except if the branch instruction is an Octeon BBIT instruction. The boring disclaimer - all MIPS defconfigs build tested and no regressions and runtime tested on Octeon, no known issues" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Handle OCTEON BBIT instructions in FPU emulator. | 21 August 2013, 23:37:14 UTC |
| 7d06baf | Linus Torvalds | 21 August 2013, 23:36:32 UTC | Merge tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 perf fixes from Catalin Marinas: "Perf backend fixes for arm64 where the user can cause kernel panic (discovered with Vince's fuzzing tool)" * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: perf: fix event validation for software group leaders arm64: perf: fix array out of bounds access in armpmu_map_hw_event() | 21 August 2013, 23:36:32 UTC |
| 69bbe13 | Linus Torvalds | 21 August 2013, 23:35:37 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "Fixes for ARM and aarch64. This pull request is coming a bit later than I would have preferred, because I and Gleb happened to have holidays around the same weeks of August... sorry about that" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: ARM: Squash len warning arm64: KVM: use 'int' instead of 'u32' for variable 'target' in kvm_host.h. arm64: KVM: add missing dsb before invalidating Stage-2 TLBs arm64: KVM: perform save/restore of PAR_EL1 arm64: KVM: fix 2-level page tables unmapping ARM: KVM: Fix unaligned unmap_range leak ARM: KVM: Fix 64-bit coprocessor handling | 21 August 2013, 23:35:37 UTC |
| da2ad2a | Linus Torvalds | 21 August 2013, 23:33:37 UTC | Merge tag 'pinctrl-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "Fixes for the sunxi (AllWinner) pin control driver. This was a new driver in this merge window, so some post-merge hardening is happening" [ I had completely missed this pull request for some reason, it was sent over a week ago but my mailbox is chaotic ] * tag 'pinctrl-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: Add spinlocks pinctrl: sunxi: Fix gpio_set behaviour pinctrl: sunxi: Read register before writing to it in irq_set_type | 21 August 2013, 23:33:37 UTC |
| 35dc248 | Roland Dreier | 06 August 2013, 00:55:01 UTC | [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal There is a nasty bug in the SCSI SG_IO ioctl that in some circumstances leads to one process writing data into the address space of some other random unrelated process if the ioctl is interrupted by a signal. What happens is the following: - A process issues an SG_IO ioctl with direction DXFER_FROM_DEV (ie the underlying SCSI command will transfer data from the SCSI device to the buffer provided in the ioctl) - Before the command finishes, a signal is sent to the process waiting in the ioctl. This will end up waking up the sg_ioctl() code: result = wait_event_interruptible(sfp->read_wait, (srp_done(sfp, srp) || sdp->detached)); but neither srp_done() nor sdp->detached is true, so we end up just setting srp->orphan and returning to userspace: srp->orphan = 1; write_unlock_irq(&sfp->rq_list_lock); return result; /* -ERESTARTSYS because signal hit process */ At this point the original process is done with the ioctl and blithely goes ahead handling the signal, reissuing the ioctl, etc. - Eventually, the SCSI command issued by the first ioctl finishes and ends up in sg_rq_end_io(). At the end of that function, we run through: write_lock_irqsave(&sfp->rq_list_lock, iflags); if (unlikely(srp->orphan)) { if (sfp->keep_orphan) srp->sg_io_owned = 0; else done = 0; } srp->done = done; write_unlock_irqrestore(&sfp->rq_list_lock, iflags); if (likely(done)) { /* Now wake up any sg_read() that is waiting for this * packet. */ wake_up_interruptible(&sfp->read_wait); kill_fasync(&sfp->async_qp, SIGPOLL, POLL_IN); kref_put(&sfp->f_ref, sg_remove_sfp); } else { INIT_WORK(&srp->ew.work, sg_rq_end_io_usercontext); schedule_work(&srp->ew.work); } Since srp->orphan *is* set, we set done to 0 (assuming the userspace app has not set keep_orphan via an SG_SET_KEEP_ORPHAN ioctl), and therefore we end up scheduling sg_rq_end_io_usercontext() to run in a workqueue. - In workqueue context we go through sg_rq_end_io_usercontext() -> sg_finish_rem_req() -> blk_rq_unmap_user() -> ... -> bio_uncopy_user() -> __bio_copy_iov() -> copy_to_user(). The key point here is that we are doing copy_to_user() on a workqueue -- that is, we're on a kernel thread with current->mm equal to whatever random previous user process was scheduled before this kernel thread. So we end up copying whatever data the SCSI command returned to the virtual address of the buffer passed into the original ioctl, but it's quite likely we do this copying into a different address space! As suggested by James Bottomley <James.Bottomley@hansenpartnership.com>, add a check for current->mm (which is NULL if we're on a kernel thread without a real userspace address space) in bio_uncopy_user(), and skip the copy if we're on a kernel thread. There's no reason that I can think of for any caller of bio_uncopy_user() to want to do copying on a kernel thread with a random active userspace address space. Huge thanks to Costa Sapuntzakis <costa@purestorage.com> for the original pointer to this bug in the sg code. Signed-off-by: Roland Dreier <roland@purestorage.com> Tested-by: David Milburn <dmilburn@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com> | 21 August 2013, 17:58:35 UTC |
| f5944da | Anton Blanchard | 08 August 2013, 07:47:34 UTC | [SCSI] lpfc: Don't force CONFIG_GENERIC_CSUM on We want ppc64 to be able to select between optimised assembly checksum routines in big endian and the generic lib/checksum.c routines in little endian. The lpfc driver is forcing CONFIG_GENERIC_CSUM on which means we are unable to make the decision to enable it in the arch Kconfig. If the option exists it is always forced on. This got introduced in 3.10 via commit 6a7252fdb0c3 ([SCSI] lpfc: fix up Kconfig dependencies). I spoke to Randy about it and the original issue was with CRC_T10DIF not being defined. As such, remove the select of CONFIG_GENERIC_CSUM. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@vger.kernel.org> # 3.10 Signed-off-by: James Bottomley <JBottomley@Parallels.com> | 21 August 2013, 17:54:20 UTC |
| 7f242bd | Mark Brown | 21 August 2013, 16:08:17 UTC | Merge remote-tracking branch 'regmap/fix/rbtree' into regmap-linus | 21 August 2013, 16:08:17 UTC |
| 4ff98c9 | Mark Brown | 21 August 2013, 16:08:17 UTC | Merge remote-tracking branch 'regmap/fix/header' into regmap-linus | 21 August 2013, 16:08:17 UTC |
| 4e67fb5 | David Jander | 21 August 2013, 15:37:22 UTC | regmap: rbtree: Fix overlapping rbnodes. Avoid overlapping register regions by making the initial blklen of a new node 1. If a register write occurs to a yet uncached register, that is lower than but near an existing node's base_reg, a new node is created and it's blklen is set to an arbitrary value (sizeof(*rbnode)). That may cause this node to overlap with another node. Those nodes should be merged, but this merge doesn't happen yet, so this patch at least makes the initial blklen small enough to avoid hitting the wrong node, which may otherwise lead to severe breakage. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org | 21 August 2013, 16:03:54 UTC |
| f3851b0 | Ben Hutchings | 09 July 2013, 16:12:49 UTC | sfc: Fix lookup of default RX MAC filters when steered using ethtool commit 385904f819e3 ('sfc: Don't use efx_filter_{build,hash,increment}() for default MAC filters') used the wrong name to find the index of default RX MAC filters at insertion/ update time. This could result in memory corruption and would in any case silently fail to update the filter. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> | 21 August 2013, 13:18:12 UTC |
| 1c09b19 | Li Zefan | 21 August 2013, 02:22:28 UTC | cpuset: fix a regression in validating config change It's not allowed to clear masks of a cpuset if there're tasks in it, but it's broken: # mkdir /cgroup/sub # echo 0 > /cgroup/sub/cpuset.cpus # echo 0 > /cgroup/sub/cpuset.mems # echo $$ > /cgroup/sub/tasks # echo > /cgroup/sub/cpuset.cpus (should fail) This bug was introduced by commit 88fa523bff295f1d60244a54833480b02f775152 ("cpuset: allow to move tasks to empty cpusets"). tj: Dropped temp bool variables and nestes the conditionals directly. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> | 21 August 2013, 12:40:27 UTC |
