Revision 93d2175d3d31f11ba04fcfa0e9a496a1b4bc8b34 authored by Yinghai Lu on 14 May 2011, 01:06:17 UTC, committed by Linus Torvalds on 17 May 2011, 01:33:35 UTC
During pci remove/rescan testing found: pci 0000:c0:03.0: PCI bridge to [bus c4-c9] pci 0000:c0:03.0: bridge window [io 0x1000-0x0fff] pci 0000:c0:03.0: bridge window [mem 0xf0000000-0xf00fffff] pci 0000:c0:03.0: bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref] pci 0000:c0:03.0: device not available (can't reserve [io 0x1000-0x0fff]) pci 0000:c0:03.0: Error enabling bridge (-22), continuing pci 0000:c0:03.0: enabling bus mastering pci 0000:c0:03.0: setting latency timer to 64 pcieport 0000:c0:03.0: device not available (can't reserve [io 0x1000-0x0fff]) pcieport: probe of 0000:c0:03.0 failed with error -22 This bug was caused by commit c8adf9a3e873 ("PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.") After that commit, pci_hotplug_io_size is changed to additional_io_size from minium size. So it will not go through resource_size(res) != 0 path, and will not be reset. The root cause is: pci_bridge_check_ranges will set RESOURCE_IO flag for pci bridge, and later if children do not need IO resource. those bridge resources will not need to be allocated. but flags is still there. that will confuse the the pci_enable_bridges later. related code: static void assign_requested_resources_sorted(struct resource_list *head, struct resource_list_x *fail_head) { struct resource *res; struct resource_list *list; int idx; for (list = head->next; list; list = list->next) { res = list->res; idx = res - &list->dev->resource[0]; if (resource_size(res) && pci_assign_resource(list->dev, idx)) { ... reset_resource(res); } } } At last, We have to clear the flags in pbus_size_mem/io when requested size == 0 and !add_head. becasue this case it will not go through adjust_resources_sorted(). Just make size1 = size0 when !add_head. it will make flags get cleared. At the same time when requested size == 0, add_size != 0, will still have in head and add_list. because we do not clear the flags for it. After this, we will get right result: pci 0000:c0:03.0: PCI bridge to [bus c4-c9] pci 0000:c0:03.0: bridge window [io disabled] pci 0000:c0:03.0: bridge window [mem 0xf0000000-0xf00fffff] pci 0000:c0:03.0: bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref] pci 0000:c0:03.0: enabling bus mastering pci 0000:c0:03.0: setting latency timer to 64 pcieport 0000:c0:03.0: setting latency timer to 64 pcieport 0000:c0:03.0: irq 160 for MSI/MSI-X pcieport 0000:c0:03.0: Signaling PME through PCIe PME interrupt pci 0000:c4:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:c0:03.0:pcie01: service driver pcie_pme loaded aer 0000:c0:03.0:pcie02: service driver aer loaded pciehp 0000:c0:03.0:pcie04: Hotplug Controller: v3: more simple fix. also fix one typo in pbus_size_mem Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Ram Pai <linuxram@us.ibm.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent df8d06a
kthread.S
/* MN10300 Kernel thread trampoline function
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by Mark Salter (msalter@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
.text
###############################################################################
#
# kernel_thread_helper - trampoline for kernel_thread()
#
# On entry:
# A2 = address of function to call
# D2 = function argument
#
###############################################################################
.globl kernel_thread_helper
.type kernel_thread_helper,@function
kernel_thread_helper:
mov do_exit,d1
mov d1,(sp)
mov d1,mdr
mov d2,d0
jmp (a2)
.size kernel_thread_helper,.-kernel_thread_helper
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...