Revision 9468613b2bb0a386af563953b613efc6c77bd8c1 authored by Russell King on 28 October 2006, 21:42:56 UTC, committed by Russell King on 28 October 2006, 21:42:56 UTC
The PXA2xx PCMCIA driver was registering a device_driver with the platform_bus_type. Unfortunately, this causes data outside the device_driver structure to be dereferenced as if it were a platform_driver structure, causing an oops. Convert the PXA2xx core driver to use the proper platform_driver structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
1 parent 84b5abe
IRQ.txt
What is an IRQ?
An IRQ is an interrupt request from a device.
Currently they can come in over a pin, or over a packet.
Several devices may be connected to the same pin thus
sharing an IRQ.
An IRQ number is a kernel identifier used to talk about a hardware
interrupt source. Typically this is an index into the global irq_desc
array, but except for what linux/interrupt.h implements the details
are architecture specific.
An IRQ number is an enumeration of the possible interrupt sources on a
machine. Typically what is enumerated is the number of input pins on
all of the interrupt controller in the system. In the case of ISA
what is enumerated are the 16 input pins on the two i8259 interrupt
controllers.
Architectures can assign additional meaning to the IRQ numbers, and
are encouraged to in the case where there is any manual configuration
of the hardware involved. The ISA IRQs are a classic example of
assigning this kind of additional meaning.
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...