Skip to main content

Browse the archive

Revision 96dcc08b0c6b730474469b10ed5eeda06e617deb authored by Sergei Shtylyov on 03 July 2007, 20:28:35 UTC, committed by Bartlomiej Zolnierkiewicz on 03 July 2007, 20:28:35 UTC 
hpt366: use correct enablebits for HPT36x
 
The HPT36x chips finally turned out to have the channel enable bits -- however,
badly implemented.  Make use of them despite it's probably only going to burden
the driver's code -- assuming both channels are always enabled by the HighPoint
BIOS anyway...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Linas Vepstas <linas@austin.ibm.com>
Cc: michal.kepien@poczta.onet.pl
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
1 parent 783353b
Raw File
mkuboot.sh 
#!/bin/bash

#
# Build U-Boot image when `mkimage' tool is available.
#

MKIMAGE=$(type -path "${CROSS_COMPILE}mkimage")

if [ -z "${MKIMAGE}" ]; then
	MKIMAGE=$(type -path mkimage)
	if [ -z "${MKIMAGE}" ]; then
		# Doesn't exist
		echo '"mkimage" command not found - U-Boot images will not be built' >&2
		exit 0;
	fi
fi

# Call "mkimage" to create U-Boot image
${MKIMAGE} "$@"
back to top