Skip to main content

Browse the archive

https://github.com/torvalds/linux
17 May 2024, 11:00:25 UTC
sort by:
Revision Author Date Message Commit Date
8d8ee18 Axel Lin 21 March 2016, 12:03:50 UTC gpio: xgene: Prevent NULL pointer dereference platform_get_resource() can return NULL, thus add NULL test to prevent NULL pointer dereference. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 30 March 2016, 08:39:39 UTC
fd975a7 Axel Lin 09 March 2016, 12:38:55 UTC gpio: menz127: Drop lock field from struct men_z127_gpio Current code uses a uninitialized spin lock. bgpio_init() already initialized a spin lock, so let's switch to use &gc->bgpio_lock instead and remove the lock from struct men_z127_gpio. Fixes: f436bc2726c6 "gpio: add driver for MEN 16Z127 GPIO controller" Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 30 March 2016, 08:39:39 UTC
b5aea3d Sridhar Samudrala 07 March 2016, 17:41:49 UTC ixgbe: Fix cls_u32 offload support for L4 ports Fix support for 16 bit source/dest port matches in ixgbe model. u32 uses a single 32-bit key value for both source and destination ports starting at offset 0. So replace the 2 functions with a single function that takes this key value/mask to program both source and dest ports. Verified with the following filter: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1: u32 divisor 1 #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:10 u32 ht 800: link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:10 u32 ht 1: \ match tcp src 1024 ffff match tcp dst 80 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:11 u32 ht 1: \ match tcp src 1025 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:12 u32 ht 1: \ match tcp dst 81 ffff action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 30 March 2016, 06:23:04 UTC
ebd83ad Sridhar Samudrala 07 March 2016, 17:41:48 UTC ixgbe: Fix cls_u32 offload support for fields with masks Remove the incorrect check for mask in ixgbe_configure_clsu32 and drop the 'mask' field that is not required in struct ixgbe_mat_field Verified with the following filters: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: \ match ip dst 10.0.0.1/8 match ip src 10.0.0.2/8 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: \ match ip dst 11.0.0.1/16 match ip src 11.0.0.2/16 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:3 u32 ht 800: \ match ip dst 12.0.0.1/24 match ip src 12.0.0.2/24 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:4 u32 ht 800: \ match ip dst 13.0.0.1/32 match ip src 13.0.0.2/32 action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 30 March 2016, 06:12:30 UTC
176621c Sridhar Samudrala 07 March 2016, 17:41:47 UTC ixgbe: fix error handling in TC cls_u32 offload routines Check for handle ids when adding/deleting hash nodes OR adding/deleting filter entries and limit them to max number of links or header nodes supported(IXGBE_MAX_LINK_HANDLE). Start from bit 0 when setting hash table bit-map.(adapter->tables) Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 30 March 2016, 06:05:51 UTC
6e2a60b Emil Tantilov 17 February 2016, 23:55:06 UTC ixgbe: make __ixgbe_setup_tc static This function is only used in ixgbe_main.c Resolves a "missing prototype" warning when building the driver with W=1 Reported-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 30 March 2016, 05:57:32 UTC
32ca686 Emil Tantilov 10 February 2016, 23:16:30 UTC ixgbevf: fix error code path when setting MAC address Return error when a MAC address change is rejected by the PF. This will prevent the user from modifying the MAC address when that operation is not permitted. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 30 March 2016, 05:53:42 UTC
324d086 Stefan Assmann 03 February 2016, 08:20:49 UTC ixgbevf: call ndo_stop() instead of dev_close() when running offline selftest Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 30 March 2016, 05:45:04 UTC
6c211fe Stefan Assmann 03 February 2016, 08:20:48 UTC ixgbe: call ndo_stop() instead of dev_close() when running offline selftest Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 30 March 2016, 05:41:33 UTC
d90b5b0 Mark Rustad 29 January 2016, 22:44:29 UTC ixgbe: Use udelay to avoid sleeping while atomic Use udelay instead of usleep_range because this can be called while a lock is held. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 30 March 2016, 05:37:17 UTC
e2873d4 Alexander Duyck 26 January 2016, 03:39:40 UTC ixgbe: Fix ATR so that it correctly handles IPv6 extension headers The ATR code was assuming that it would be able to use tcp_hdr for every TCP frame that came through. However this isn't the case as it is possible for a frame to arrive that is TCP but sent through something like a raw socket. As a result the driver was setting up bad filters in which tcp_hdr was really pointing to the network header so the data was all invalid. In order to correct this I have added a bit of parsing logic that will determine the TCP header location based off of the network header and either the offset in the case of the IPv4 header, or a walk through the IPv6 extension headers until it encounters the header that indicates IPPROTO_TCP. In addition I have added checks to verify that the lowest protocol provided is recognized as IPv4 or IPv6 to help mitigate raw sockets using ETH_P_ALL from having ATR applied to them. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 30 March 2016, 05:32:33 UTC
9f12df9 Alexander Duyck 26 January 2016, 03:36:29 UTC ixgbe: Store VXLAN port number in network order The VXLAN port number should be stored in network order instead of in host order as it is accessed from the hot-path in ATR. This way we can avoid having to do any byte swaps in order to validate the port number. I moved the vxlan_port value into a hole in the read-mostly region of the adapter struct. This way it should be in a warm cache-line instead of in some isolated region in memory when it needs to be accessed. In addition I went through and stripped a bunch of unneeded ifdef flags since having an extra variable present doesn't really hurt anything and makes the code easier to read. I also went through and dropped the NETIF_F_RXCSUM flag which was being set in hw_encap_features but provides no value as the flag is not evaluated in the Rx path. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 30 March 2016, 05:24:16 UTC
5676804 Tushar Dave 07 January 2016, 22:17:03 UTC ixgbe: Fix for RAR0 not being set to default MAC addr commit c9f53e63c208 ("ixgbe: Refactor MAC address configuration code") introduced code that doesn't set HW register RAR0 to default mac address but FF:FF:FF:FF:FF:FF. Due to this, ixgbe HW discards all incoming packets that doesn't have destination mac address equals to FF:FF:FF:FF:FF:FF. This commit sets RAR0 correctly to default HW mac address. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Tested-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 30 March 2016, 05:06:50 UTC
2aac7dd Matthew McClintock 23 March 2016, 22:05:00 UTC clk: qcom: ipq4019: add some fixed clocks for ddrppl and fepll Drivers for these don't exist yet so we will add them as fixed clocks so we don't BUG() if we change clocks that reference these clocks. Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 29 March 2016, 23:31:16 UTC
bc95d4f Matthew McClintock 23 March 2016, 22:04:59 UTC clk: qcom: ipq4019: switch remaining defines to enums When this was added not all the remaining defines were switched over to use enums, so let's complete that process here Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 29 March 2016, 23:31:11 UTC
add479e Philipp Zabel 25 February 2016, 09:45:12 UTC clk: qcom: Make reset_control_ops const The qcom_reset_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 29 March 2016, 23:30:26 UTC
7ba256d Philipp Zabel 25 February 2016, 09:45:11 UTC clk: tegra: Make reset_control_ops const The rst_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 29 March 2016, 23:30:12 UTC
5e7bc9c Philipp Zabel 25 February 2016, 09:45:10 UTC clk: sunxi: Make reset_control_ops const The sunxi_ve_reset_ops, sun9i_mmc_reset_ops, and sunxi_usb_reset_ops structures are never modified. Make them const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 29 March 2016, 23:30:07 UTC
b1b69c5 Philipp Zabel 25 February 2016, 09:45:09 UTC clk: atlas7: Make reset_control_ops const The atlas7_rst_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 29 March 2016, 23:30:01 UTC
3fb950f Philipp Zabel 25 February 2016, 09:45:08 UTC clk: rockchip: Make reset_control_ops const The rockchip_softrst_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 29 March 2016, 23:29:46 UTC
fd92f41 Philipp Zabel 25 February 2016, 09:45:07 UTC clk: mmp: Make reset_control_ops const The mmp_clk_reset_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 29 March 2016, 23:29:34 UTC
f39bb45 Philipp Zabel 25 February 2016, 09:45:06 UTC clk: mediatek: Make reset_control_ops const The mtk_reset_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 29 March 2016, 23:29:19 UTC
3ea223a Arnaldo Carvalho de Melo 29 March 2016, 21:46:04 UTC perf tools: Add missing initialization of perf_sample.cpumode in synthesized samples In 473398a21d28 ("perf tools: Add cpumode to struct perf_sample"), I missed some places where perf_sample fields are directly initialized in addition to what is done in perf_evsel__parse_sample(), namely when synthesizing PERF_RECORD_{MMAP*,COMM,FORK,EXIT} for pre-existing threads and also in intel_pt and intel_bts when synthesizing events from processor trace, the jitdump code also was affected, fix it. The problem was noticed with running: # perf record -e intel_pt//u true # perf script Where the samples wouldn't get resolved because perf_sample.cpumode would be left as zero, i.e. PERF_RECORD_MISC_CPUMODE_UNKNOWN, not resolving as kernel, hypervisor or user cpu modes. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 473398a21d28 ("perf tools: Add cpumode to struct perf_sample") Link: http://lkml.kernel.org/n/tip-n5sdauxgk24d5nun8kuuu2mh@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 29 March 2016, 23:03:56 UTC
431597b Will Deacon 29 March 2016, 15:39:12 UTC arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com> 29 March 2016, 15:56:00 UTC
82c7d82 Andrew Price 22 March 2016, 17:36:34 UTC dlm: config: Fix ENOMEM failures in make_cluster() Commit 1ae1602de0 "configfs: switch ->default groups to a linked list" left the NULL gps pointer behind after removing the kcalloc() call which made it non-NULL. It also left the !gps check in place so make_cluster() now fails with ENOMEM. Remove the remaining uses of the gps variable to fix that. Reviewed-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> 29 March 2016, 15:28:08 UTC
b8cfadf Shannon Zhao 24 March 2016, 16:01:16 UTC arm64: perf: Move PMU register related defines to asm/perf_event.h To use the ARMv8 PMU related register defines from the KVM code, we move the relevant definitions to asm/perf_event.h header file and rename them with prefix ARMV8_PMU_. This allows us to get rid of kvm_perf_event.h. Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> 29 March 2016, 15:04:57 UTC
a6002ec James Morse 24 March 2016, 16:54:34 UTC arm64: opcodes.h: Add arm big-endian config options before including arm header arm and arm64 use different config options to specify big endian. This needs taking into account when including code/headers between the two architectures. A case in point is PAN, which uses the __instr_arm() macro to output instructions. The macro comes from opcodes.h, which lives under arch/arm. On a big-endian build the mismatched config options mean the instruction isn't byte swapped correctly, resulting in undefined instruction exceptions during boot: | alternatives: patching kernel code | kdevtmpfs[87]: undefined instruction: pc=ffffffc0004505b4 | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | Internal error: Oops - undefined instruction: 0 [#1] SMP | Modules linked in: | CPU: 0 PID: 87 Comm: kdevtmpfs Not tainted 4.1.16+ #5 | Hardware name: Hisilicon PhosphorHi1382 EVB (DT) | task: ffffffc336591700 ti: ffffffc3365a4000 task.ti: ffffffc3365a4000 | PC is at dump_instr+0x68/0x100 | LR is at do_undefinstr+0x1d4/0x2a4 | pc : [<ffffffc00076231c>] lr : [<ffffffc0000811d4>] pstate: 604001c5 | sp : ffffffc3365a6450 Cc: <stable@vger.kernel.org> #4.3.x- Reported-by: Hanjun Guo <guohanjun@huawei.com> Tested-by: Xuefeng Wang <wxf.wang@hisilicon.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> 29 March 2016, 15:04:57 UTC
d758684 Bjorn Andersson 22 March 2016, 05:43:54 UTC MAINTAINERS: Add mailing list for remote processor subsystems Add the newly created linux-remoteproc mailing list for the three subsystems related to remote processor management and communication. Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 29 March 2016, 14:05:24 UTC
5529578 Frederic Weisbecker 24 March 2016, 14:38:01 UTC locking/atomic, sched: Unexport fetch_or() This patch functionally reverts: 5fd7a09cfb8c ("atomic: Export fetch_or()") During the merge Linus observed that the generic version of fetch_or() was messy: " This makes the ugly "fetch_or()" macro that the scheduler used internally a new generic helper, and does a bad job at it. " e23604edac2a Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Now that we have introduced atomic_fetch_or(), fetch_or() is only used by the scheduler in order to deal with thread_info flags which type can vary across architectures. Lets confine fetch_or() back to the scheduler so that we encourage future users to use the more robust and well typed atomic_t version instead. While at it, fetch_or() gets robustified, pasting improvements from a previous patch by Ingo Molnar that avoids needless expression re-evaluations in the loop. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1458830281-4255-4-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 29 March 2016, 09:52:11 UTC
f009a7a Frederic Weisbecker 24 March 2016, 14:38:00 UTC timers/nohz: Convert tick dependency mask to atomic_t The tick dependency mask was intially unsigned long because this is the type on which clear_bit() operates on and fetch_or() accepts it. But now that we have atomic_fetch_or(), we can instead use atomic_andnot() to clear the bit. This consolidates the type of our tick dependency mask, reduce its size on structures and benefit from possible architecture optimizations on atomic_t operations. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1458830281-4255-3-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 29 March 2016, 09:52:11 UTC
5acba71 Frederic Weisbecker 24 March 2016, 14:37:59 UTC locking/atomic: Introduce atomic_fetch_or() This is deemed to replace the type generic fetch_or() which brings a lot of issues such as macro induced block variable aliasing and sloppy types. Not to mention fetch_or() doesn't refer to any namespace, adding even more confusion. So lets provide an atomic_t version. Current and next users of fetch_or() are thus encouraged to use atomic_t. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1458830281-4255-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 29 March 2016, 09:52:11 UTC
34a4cce Huang Rui 25 March 2016, 02:08:40 UTC x86/cpu: Add advanced power management bits Bit 11 of CPUID 8000_0007 edx is processor feedback interface. Bit 12 of CPUID 8000_0007 edx is accumulated power. Print proper names in proc/cpuinfo Reported-and-tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Huang Rui <ray.huang@amd.com> Cc: Tony Li <tony.li@amd.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Sherry Hurwitz <sherry.hurwitz@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: "Len Brown" <lenb@kernel.org> Link: http://lkml.kernel.org/r/1458871720-3209-1-git-send-email-ray.huang@amd.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 29 March 2016, 09:12:11 UTC
5f870a3 Borislav Petkov 28 March 2016, 18:20:17 UTC x86/thread_info: Merge two !__ASSEMBLY__ sections We have #ifndef __ASSEMBLY__ ... #endif #ifndef __ASSEMBLY__ ... #endif Merge the two. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1459189217-25532-1-git-send-email-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 29 March 2016, 09:12:10 UTC
4a6772f Vladimir Zapolskiy 26 March 2016, 18:47:00 UTC x86/cpufreq: Remove duplicated TDP MSR macro definitions The list of CPU model specific registers contains two copies of TDP registers, remove the one, which is out of numerical order in the list. Fixes: 6a35fc2d6c22 ("cpufreq: intel_pstate: get P1 from TAR when available") Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Len Brown <len.brown@intel.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Kristen Carlson Accardi <kristen@linux.intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: http://lkml.kernel.org/r/1459018020-24577-1-git-send-email-vladimir_zapolskiy@mentor.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 29 March 2016, 09:12:10 UTC
74b2375 Harald Freudenberger 17 March 2016, 13:52:17 UTC s390/crypto: provide correct file mode at device register. When the prng device driver calls misc_register() there is the possibility to also provide the recommented file permissions. This fix now gives useful values (0644) where previously just the default was used (resulting in 0600 for the device file). Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 29 March 2016, 08:55:12 UTC
f7be861 Borislav Petkov 28 March 2016, 09:56:09 UTC x86/Documentation: Start documenting x86 topology This should contain important aspects of how we represent the system topology on x86. If people have questions about it and this file doesn't answer it, then it must be updated. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20160328095609.GD26651@pd.tnic Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 29 March 2016, 08:45:04 UTC
8196dab Borislav Petkov 25 March 2016, 14:52:36 UTC x86/cpu: Get rid of compute_unit_id It is cpu_core_id anyway. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1458917557-8757-3-git-send-email-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 29 March 2016, 08:45:04 UTC
32b62f4 Peter Zijlstra 25 March 2016, 14:52:35 UTC perf/x86/amd: Cleanup Fam10h NB event constraints Avoid allocating the AMD NB event constraints data structure when not needed. This gets rid of x86_max_cores usage and avoids allocating this on AMD Core Perfctr supporting hardware (which has separate MSRs for NB events). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: aherrmann@suse.com Cc: Rui Huang <ray.huang@amd.com> Cc: Borislav Petkov <bp@alien8.de> Cc: jencce.kernel@gmail.com Link: http://lkml.kernel.org/r/20160320124629.GY6375@twins.programming.kicks-ass.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 29 March 2016, 08:45:04 UTC
ee6825c Peter Zijlstra 25 March 2016, 14:52:34 UTC x86/topology: Fix AMD core count It turns out AMD gets x86_max_cores wrong when there are compute units. The issue is that Linux assumes: nr_logical_cpus = nr_cores * nr_siblings But AMD reports its CU unit as 2 cores, but then sets num_smp_siblings to 2 as well. Boris: fixup ras/mce_amd_inj.c too, to compute the Node Base Core properly, according to the new nomenclature. Fixes: 1f12e32f4cd5 ("x86/topology: Create logical package id") Reported-by: Xiong Zhou <jencce.kernel@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andreas Herrmann <aherrmann@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Link: http://lkml.kernel.org/r/20160317095220.GO6344@twins.programming.kicks-ass.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 29 March 2016, 08:45:04 UTC
5dc1037 Ingo Molnar 29 March 2016, 08:39:12 UTC Merge tag 'perf-urgent-for-mingo-20160328' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fix from Arnaldo Carvalho de Melo: - Fix build break on PowerPC due to missing headers with prototypes for functions defined in tools/perf/arch/powerpc/util/header.c (Sukadev Bhattiprolu) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> 29 March 2016, 08:39:12 UTC
71528d8 Simon Guo 24 March 2016, 17:12:21 UTC powerpc: Correct used_vsr comment The used_vsr flag is set if process has used VSX registers, not Altivec registers. But the comment says otherwise, correct the comment. Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 29 March 2016, 01:08:08 UTC
01d7c2a Oliver O'Halloran 07 March 2016, 22:08:47 UTC powerpc/process: Fix altivec SPR not being saved In save_sprs() in process.c contains the following test: if (cpu_has_feature(cpu_has_feature(CPU_FTR_ALTIVEC))) t->vrsave = mfspr(SPRN_VRSAVE); CPU feature with the mask 0x1 is CPU_FTR_COHERENT_ICACHE so the test is equivilent to: if (cpu_has_feature(CPU_FTR_ALTIVEC) && cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) On CPUs without support for both (i.e G5) this results in vrsave not being saved between context switches. The vector register save/restore code doesn't use VRSAVE to determine which registers to save/restore, but the value of VRSAVE is used to determine if altivec is being used in several code paths. Fixes: 152d523e6307 ("powerpc: Create context switch helpers save_sprs() and restore_sprs()") Cc: stable@vger.kernel.org Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 29 March 2016, 01:08:08 UTC
08a5bb2 Sebastian Siewior 08 March 2016, 09:03:56 UTC powerpc/mm: Fixup preempt underflow with huge pages hugepd_free() used __get_cpu_var() once. Nothing ensured that the code accessing the variable did not migrate from one CPU to another and soon this was noticed by Tiejun Chen in 94b09d755462 ("powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var"). So we had it fixed. Christoph Lameter was doing his __get_cpu_var() replaces and forgot PowerPC. Then he noticed this and sent his fixed up batch again which got applied as 69111bac42f5 ("powerpc: Replace __get_cpu_var uses"). The careful reader will noticed one little detail: get_cpu_var() got replaced with this_cpu_ptr(). So now we have a put_cpu_var() which does a preempt_enable() and nothing that does preempt_disable() so we underflow the preempt counter. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux.com> Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 29 March 2016, 01:08:07 UTC
fc0c202 Dan Williams 08 March 2016, 18:30:19 UTC x86, pmem: use memcpy_mcsafe() for memcpy_from_pmem() Update the definition of memcpy_from_pmem() to return 0 or a negative error code. Implement x86/arch_memcpy_from_pmem() with memcpy_mcsafe(). Cc: Borislav Petkov <bp@alien8.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 29 March 2016, 00:19:31 UTC
e84810c Bjørn Mork 28 March 2016, 20:38:16 UTC qmi_wwan: add "D-Link DWM-221 B1" device id Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 29 March 2016, 00:12:01 UTC
4b28038 Vladimir Zapolskiy 19 March 2016, 13:31:10 UTC remoteproc: st: fix check of syscon_regmap_lookup_by_phandle() return value syscon_regmap_lookup_by_phandle() returns either a valid pointer to struct regmap or ERR_PTR() error value, check for NULL is invalid and on error path may lead to oops, the change corrects the check. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 28 March 2016, 23:19:00 UTC
379649c Sukadev Bhattiprolu 28 March 2016, 12:31:41 UTC perf tools: Fix build break on powerpc Commit 531d2410635c ("perf tools: Do not include stringify.h from the kernel sources") seems to have accidentially removed the inclusion of "util/header.h" from "arch/powerpc/util/header.c". "util/header.h" provides the prototype for get_cpuid() and is needed to build perf on Powerpc: arch/powerpc/util/header.c:17:1: error: no previous prototype for 'get_cpuid' [-Werror=missing-prototypes] Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 531d2410635c ("perf tools: Do not include stringify.h from the kernel sources") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> [ Included "util.h" too, to get the scnprintf() prototype ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 28 March 2016, 20:46:20 UTC
1993b17 Linus Torvalds 28 March 2016, 20:17:02 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide Pull IDE fixes from David Miller: "Just two small changes: 1) Remove bogus init annotation in icside, from Arnd Bergmann. 2) Don't use zero clock rates in palm_bk3710 driver, from Wolfram Sang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: palm_bk3710: test clock rate to avoid division by 0 ide: icside: remove incorrect initconst annotation 28 March 2016, 20:17:02 UTC
d4dc3b2 Linus Torvalds 28 March 2016, 20:14:11 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc fixes from David Miller: "Minor typing cleanup from Joe Perches, and some comment typo fixes from Adam Buchbinder" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Convert naked unsigned uses to unsigned int sparc: Fix misspellings in comments. 28 March 2016, 20:14:11 UTC
ec3c073 Linus Torvalds 28 March 2016, 20:04:55 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile bugfixes from Chris Metcalf: "These include updates to MAINTAINERS, some comment spelling fixes, and a bugfix to the tile kgdb.c support" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: Fix misspellings in comments. MAINTAINERS: update web link for tile architecture MAINTAINERS: update arch/tile maintainer email domain tile kgdb: fix bug in copy to gdb regs, and optimize memset 28 March 2016, 20:04:55 UTC
0c84ea1 David S. Miller 28 March 2016, 19:38:59 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for you net tree, they are: 1) There was a race condition between parallel save/swap and delete, which resulted a kernel crash due to the increase ref for save, swap, wrong ref decrease operations. Reported and fixed by Vishwanath Pai. 2) OVS should call into CT NAT for packets of new expected connections only when the conntrack state is persisted with the 'commit' option to the OVS CT action. From Jarno Rajahalme. 3) Resolve kconfig dependencies with new OVS NAT support. From Arnd Bergmann. 4) Early validation of entry->target_offset to make sure it doesn't take us out from the blob, from Florian Westphal. 5) Again early validation of entry->next_offset to make sure it doesn't take out from the blob, also from Florian. 6) Check that entry->target_offset is always of of sizeof(struct xt_entry) for unconditional entries, when checking both from check_underflow() and when checking for loops in mark_source_chains(), again from Florian. 7) Fix inconsistent behaviour in nfnetlink_queue when NFQA_CFG_F_FAIL_OPEN is set and netlink_unicast() fails due to buffer overrun, we have to reinject the packet as the user expects. 8) Enforce nul-terminated table names from getsockopt GET_ENTRIES requests. 9) Don't assume skb->sk is set from nft_bridge_reject and synproxy, this fixes a recent update of the code to namespaceify ip_default_ttl, patch from Liping Zhang. This batch comes with four patches to validate x_tables blobs coming from userspace. CONFIG_USERNS exposes the x_tables interface to unpriviledged users and to be honest this interface never received the attention for this move away from the CAP_NET_ADMIN domain. Florian is working on another round with more patches with more sanity checks, so expect a bit more Netfilter fixes in this development cycle than usual. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2016, 19:38:59 UTC
2942119 Liping Zhang 26 March 2016, 08:32:57 UTC netfilter: ipv4: fix NULL dereference Commit fa50d974d104 ("ipv4: Namespaceify ip_default_ttl sysctl knob") use sock_net(skb->sk) to get the net namespace, but we can't assume that sk_buff->sk is always exist, so when it is NULL, oops will happen. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Reviewed-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 28 March 2016, 15:59:29 UTC
b301f25 Pablo Neira Ayuso 24 March 2016, 20:29:53 UTC netfilter: x_tables: enforce nul-terminated table name from getsockopt GET_ENTRIES Make sure the table names via getsockopt GET_ENTRIES is nul-terminated in ebtables and all the x_tables variants and their respective compat code. Uncovered by KASAN. Reported-by: Baozeng Ding <sploving1@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 28 March 2016, 15:59:24 UTC
9314011 Pablo Neira Ayuso 23 March 2016, 11:58:01 UTC netfilter: nfnetlink_queue: honor NFQA_CFG_F_FAIL_OPEN when netlink unicast fails When netlink unicast fails to deliver the message to userspace, we should also check if the NFQA_CFG_F_FAIL_OPEN flag is set so we reinject the packet back to the stack. I think the user expects no packet drops when this flag is set due to queueing to userspace errors, no matter if related to the internal queue or when sending the netlink message to userspace. The userspace application will still get the ENOBUFS error via recvmsg() so the user still knows that, with the current configuration that is in place, the userspace application is not consuming the messages at the pace that the kernel needs. Reported-by: "Yigal Reiss (yreiss)" <yreiss@cisco.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Tested-by: "Yigal Reiss (yreiss)" <yreiss@cisco.com> 28 March 2016, 15:59:20 UTC
54d83fc Florian Westphal 22 March 2016, 17:02:52 UTC netfilter: x_tables: fix unconditional helper Ben Hawkes says: In the mark_source_chains function (net/ipv4/netfilter/ip_tables.c) it is possible for a user-supplied ipt_entry structure to have a large next_offset field. This field is not bounds checked prior to writing a counter value at the supplied offset. Problem is that mark_source_chains should not have been called -- the rule doesn't have a next entry, so its supposed to return an absolute verdict of either ACCEPT or DROP. However, the function conditional() doesn't work as the name implies. It only checks that the rule is using wildcard address matching. However, an unconditional rule must also not be using any matches (no -m args). The underflow validator only checked the addresses, therefore passing the 'unconditional absolute verdict' test, while mark_source_chains also tested for presence of matches, and thus proceeeded to the next (not-existent) rule. Unify this so that all the callers have same idea of 'unconditional rule'. Reported-by: Ben Hawkes <hawkes@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 28 March 2016, 15:59:15 UTC
6e94e0c Florian Westphal 22 March 2016, 17:02:50 UTC netfilter: x_tables: make sure e->next_offset covers remaining blob size Otherwise this function may read data beyond the ruleset blob. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 28 March 2016, 15:59:08 UTC
bdf533d Florian Westphal 22 March 2016, 17:02:49 UTC netfilter: x_tables: validate e->target_offset early We should check that e->target_offset is sane before mark_source_chains gets called since it will fetch the target entry for loop detection. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 28 March 2016, 15:59:04 UTC
99b7248 Arnd Bergmann 18 March 2016, 13:33:45 UTC openvswitch: call only into reachable nf-nat code The openvswitch code has gained support for calling into the nf-nat-ipv4/ipv6 modules, however those can be loadable modules in a configuration in which openvswitch is built-in, leading to link errors: net/built-in.o: In function `__ovs_ct_lookup': :(.text+0x2cc2c8): undefined reference to `nf_nat_icmp_reply_translation' :(.text+0x2cc66c): undefined reference to `nf_nat_icmpv6_reply_translation' The dependency on (!NF_NAT || NF_NAT) prevents similar issues, but NF_NAT is set to 'y' if any of the symbols selecting it are built-in, but the link error happens when any of them are modular. A second issue is that even if CONFIG_NF_NAT_IPV6 is built-in, CONFIG_NF_NAT_IPV4 might be completely disabled. This is unlikely to be useful in practice, but the driver currently only handles IPv6 being optional. This patch improves the Kconfig dependency so that openvswitch cannot be built-in if either of the two other symbols are set to 'm', and it replaces the incorrect #ifdef in ovs_ct_nat_execute() with two "if (IS_ENABLED())" checks that should catch all corner cases also make the code more readable. The same #ifdef exists ovs_ct_nat_to_attr(), where it does not cause a link error, but for consistency I'm changing it the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 05752523e565 ("openvswitch: Interface with NAT.") Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 28 March 2016, 15:58:59 UTC
5745b0b Jarno Rajahalme 21 March 2016, 18:15:19 UTC openvswitch: Fix checking for new expected connections. OVS should call into CT NAT for packets of new expected connections only when the conntrack state is persisted with the 'commit' option to the OVS CT action. The test for this condition is doubly wrong, as the CT status field is ANDed with the bit number (IPS_EXPECTED_BIT) rather than the mask (IPS_EXPECTED), and due to the wrong assumption that the expected bit would apply only for the first (i.e., 'new') packet of a connection, while in fact the expected bit remains on for the lifetime of an expected connection. The 'ctinfo' value IP_CT_RELATED derived from the ct status can be used instead, as it is only ever applicable to the 'new' packets of the expected connection. Fixes: 05752523e565 ('openvswitch: Interface with NAT.') Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 28 March 2016, 15:58:51 UTC
596cf3f Vishwanath Pai 16 March 2016, 20:49:00 UTC netfilter: ipset: fix race condition in ipset save, swap and delete This fix adds a new reference counter (ref_netlink) for the struct ip_set. The other reference counter (ref) can be swapped out by ip_set_swap and we need a separate counter to keep track of references for netlink events like dump. Using the same ref counter for dump causes a race condition which can be demonstrated by the following script: ipset create hash_ip1 hash:ip family inet hashsize 1024 maxelem 500000 \ counters ipset create hash_ip2 hash:ip family inet hashsize 300000 maxelem 500000 \ counters ipset create hash_ip3 hash:ip family inet hashsize 1024 maxelem 500000 \ counters ipset save & ipset swap hash_ip3 hash_ip2 ipset destroy hash_ip3 /* will crash the machine */ Swap will exchange the values of ref so destroy will see ref = 0 instead of ref = 1. With this fix in place swap will not succeed because ipset save still has ref_netlink on the set (ip_set_swap doesn't swap ref_netlink). Both delete and swap will error out if ref_netlink != 0 on the set. Note: The changes to *_head functions is because previously we would increment ref whenever we called these functions, we don't do that anymore. Reviewed-by: Joshua Hunt <johunt@akamai.com> Signed-off-by: Vishwanath Pai <vpai@akamai.com> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 28 March 2016, 15:57:45 UTC
104ece9 Michel Dänzer 28 March 2016, 03:53:02 UTC drm/amdgpu: Don't move pinned BOs The purpose of pinning is to prevent a buffer from moving. Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 28 March 2016, 15:55:38 UTC
e1a575a Michel Dänzer 28 March 2016, 07:39:14 UTC drm/radeon: Don't move pinned BOs The purpose of pinning is to prevent a buffer from moving. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 28 March 2016, 15:54:51 UTC
0e3e799 Charles Keepax 28 March 2016, 12:47:42 UTC net: macb: Only call GPIO functions if there is a valid GPIO GPIOlib will print warning messages if we call GPIO functions without a valid GPIO. Change the code to avoid doing so. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2016, 15:39:16 UTC
9832ce4 Lisheng 28 March 2016, 10:40:57 UTC net: hns: set-coalesce-usecs returns errno by dsaf.ko It may fail to set coalesce usecs to HW, and Ethtool needs to know if it is successful to cfg the parameter or not. So it needs return the errno by dsaf.ko. Signed-off-by: Lisheng <lisheng011@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2016, 15:39:16 UTC
43adc06 Lisheng 28 March 2016, 10:40:56 UTC net: hns: fixed the setting and getting overtime bug The overtime setting and getting REGs in HNS V2 is defferent from HNS V1. It needs to be distinguished between them if getting or setting the REGs. Signed-off-by: Lisheng <lisheng011@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2016, 15:39:16 UTC
ac71b46 Haishuang Yan 28 March 2016, 10:08:59 UTC openvswitch: Use proper buffer size in nla_memcpy For the input parameter count, it's better to use the size of destination buffer size, as nla_memcpy would take into account the length of the source netlink attribute when a data is copied from an attribute. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2016, 15:37:14 UTC
0e5585d Alex Deucher 28 March 2016, 14:21:20 UTC drm/radeon: add a dpm quirk for all R7 370 parts Higher mclk values are not stable due to a bug somewhere. Limit them for now. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 28 March 2016, 14:21:20 UTC
a64663d Alex Deucher 28 March 2016, 14:16:40 UTC drm/radeon: add another R7 370 quirk bug: https://bugzilla.kernel.org/show_bug.cgi?id=115291 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 28 March 2016, 14:16:40 UTC
6b94fb1 Takashi Sakamoto 27 March 2016, 23:29:32 UTC ALSA: dice: fix memory leak when unplugging When sound card is going to be released, dice private data is also released. Then all of data should be released. However, stream data is not released. This causes memory leak when unplugging dice unit. This commit fixes the bug. Fixes: 4bdc495c87b3('ALSA: dice: handle several PCM substreams when any isochronous streams are available') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> 28 March 2016, 07:32:57 UTC
06b898e Douglas Anderson 07 March 2016, 22:00:53 UTC drm/rockchip: dw_hdmi: Don't call platform_set_drvdata() The Rockchip dw_hdmi driver just called platform_set_drvdata() to get your hopes up that maybe, somehow, you'd be able to retrieve the 'struct rockchip_hdmi' from a pointer to the 'struct device'. You can't. When we call dw_hdmi_bind() the main driver calls dev_set_drvdata(), which clobbers our setting. Let's just remove the platform_set_drvdata() to avoid dashing people's hopes. Signed-off-by: Douglas Anderson <dianders@chromium.org> 28 March 2016, 06:48:32 UTC
328b51c Douglas Anderson 07 March 2016, 22:00:52 UTC drm/rockchip: vop: Fix vop crtc cleanup This fixes a few problems in the vop crtc cleanup (handling error paths and cleanup upon exit): * The vop_create_crtc() error path had an unsafe version of the iterator used for iterating over all planes (though it was destroying planes in the iterator so should have used the safe version) * vop_destroy_crtc() - wasn't calling vop_plane_destroy(), which made slub_debug unhappy, at least if we ended up running this due to a deferred probe. * In vop_create_crtc() if we were missing the "port" device tree node we would fail but not return an error (found by code inspection). Fix these problems. Signed-off-by: Douglas Anderson <dianders@chromium.org> 28 March 2016, 06:48:32 UTC
948cf42 Douglas Anderson 07 March 2016, 22:00:50 UTC drm/rockchip: dw_hdmi: Call drm_encoder_cleanup() in error path The drm_encoder_cleanup() was missing both from the error path of dw_hdmi_rockchip_bind(). This caused a crash when slub_debug was enabled and we ended up deferring probe of HDMI at boot. This call isn't needed from unbind() because if dw_hdmi_bind() returns no error then it takes over the job of freeing the encoder (in dw_hdmi_unbind). Signed-off-by: Douglas Anderson <dianders@chromium.org> 28 March 2016, 06:48:31 UTC
3ed6c64 Tomeu Vizoso 22 March 2016, 15:08:04 UTC drm/rockchip: vop: Disable planes when disabling CRTC When a VOP is re-enabled, it will start scanning right away the framebuffers that were configured from the last time, even if those have been destroyed already. To prevent the VOP from trying to access freed memory, disable all its windows when the CRTC is being disabled, then each window will get a valid framebuffer address before it's enabled again. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Link: http://lkml.kernel.org/g/CAAObsKAv+05ih5U+=4kic_NsjGMhfxYheHR8xXXmacZs+p5SHw@mail.gmail.com 28 March 2016, 06:48:30 UTC
eac5ad8 Tomeu Vizoso 18 March 2016, 11:22:02 UTC drm/rockchip: vop: Don't reject empty modesets So that when DRM_IOCTL_MODE_SETCRTC is called without a FB nor mode, the CRTC gets disabled. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Link: http://lkml.kernel.org/g/CAAObsKAv+05ih5U+=4kic_NsjGMhfxYheHR8xXXmacZs+p5SHw@mail.gmail.com 28 March 2016, 06:48:30 UTC
f135046 John Keeping 11 March 2016, 17:21:17 UTC drm/rockchip: cancel pending vblanks on close When closing the DRM device while a vblank is pending, we access file_priv after it has been free'd, which gives: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... PC is at __list_add+0x5c/0xe8 LR is at send_vblank_event+0x54/0x1f0 ... [<c02952e8>] (__list_add) from [<c031a7b4>] (send_vblank_event+0x54/0x1f0) [<c031a760>] (send_vblank_event) from [<c031a9c0>] (drm_send_vblank_event+0x70/0x78) [<c031a950>] (drm_send_vblank_event) from [<c031a9f8>] (drm_crtc_send_vblank_event+0x30/0x34) [<c031a9c8>] (drm_crtc_send_vblank_event) from [<c0339ad8>] (vop_isr+0x224/0x28c) [<c03398b4>] (vop_isr) from [<c0081780>] (handle_irq_event_percpu+0x12c/0x3e4) This can be triggered somewhat reliably with: modetest -M rockchip -v -s ... Add a preclose hook to the driver so that we can discard any pending vblank events when the device is closed. Signed-off-by: John Keeping <john@metanate.com> 28 March 2016, 06:48:29 UTC
92915da John Keeping 04 March 2016, 11:04:03 UTC drm/rockchip: vop: fix crtc size in plane check If the geometry of a crtc is changing in an atomic update then we must validate the plane size against the new state of the crtc and not the current size, otherwise if the crtc size is increasing the plane will be cropped at the previous size and will not fill the screen. Signed-off-by: John Keeping <john@metanate.com> 28 March 2016, 06:48:29 UTC
d7be81a Lino Sanfilippo 27 March 2016, 10:22:02 UTC ravb: fix software timestamping In ravb_start_xmit dont call skb_tx_timestamp only when hardware timestamping is requested: in the latter case software timestamps are suppressed and thus the call of skb_tx_timestamp does not have any effect. Instead call skb_tx_timestamp unconditionally in ravb_start_xmit, since the function checks itself if software timestamping is required or should be skipped due to hardware timestamping. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2016, 02:41:37 UTC
79c1342 Rasmus Villemoes 26 March 2016, 21:24:09 UTC net: sxgbe: fix error paths in sxgbe_platform_probe() We need to use post-decrement to ensure that irq_dispose_mapping is also called on priv->rxq[0]->irq_no; moreover, if one of the above for loops failed already at i==0 (so we reach one of these labels with that value of i), we'll enter an essentially infinite loop of out-of-bounds accesses. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2016, 02:39:22 UTC
66391b3 Cosmin-Gabriel Samoila 26 March 2016, 00:49:50 UTC Drivers: isdn: hisax: isac.c: Fix assignment and check into one expression. Fix variable assignment inside if statement. It is error-prone and hard to read. Signed-off-by: Cosmin-Gabriel Samoila <gabrielcsmo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2016, 02:38:12 UTC
995096a Quentin Armitage 27 March 2016, 16:06:11 UTC Fix returned tc and hoplimit values for route with IPv6 encapsulation For a route with IPv6 encapsulation, the traffic class and hop limit values are interchanged when returned to userspace by the kernel. For example, see below. ># ip route add 192.168.0.1 dev eth0.2 encap ip6 dst 0x50 tc 0x50 hoplimit 100 table 1000 ># ip route show table 1000 192.168.0.1 encap ip6 id 0 src :: dst fe83::1 hoplimit 80 tc 100 dev eth0.2 scope link Signed-off-by: Quentin Armitage <quentin@armitage.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2016, 02:35:02 UTC
a69f0e2 Diego Viola 27 March 2016, 23:58:15 UTC drivers/net/usb/plusb.c: Fix typo Signed-off-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2016, 02:33:56 UTC
3c2e226 Guenter Roeck 26 March 2016, 19:28:05 UTC hwmon: (max1111) Return -ENODEV from max1111_read_channel if not instantiated arm:pxa_defconfig can result in the following crash if the max1111 driver is not instantiated. Unhandled fault: page domain fault (0x01b) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 1b [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 300 Comm: kworker/0:1 Not tainted 4.5.0-01301-g1701f680407c #10 Hardware name: SHARP Akita Workqueue: events sharpsl_charge_toggle task: c390a000 ti: c391e000 task.ti: c391e000 PC is at max1111_read_channel+0x20/0x30 LR is at sharpsl_pm_pxa_read_max1111+0x2c/0x3c pc : [<c03aaab0>] lr : [<c0024b50>] psr: 20000013 ... [<c03aaab0>] (max1111_read_channel) from [<c0024b50>] (sharpsl_pm_pxa_read_max1111+0x2c/0x3c) [<c0024b50>] (sharpsl_pm_pxa_read_max1111) from [<c00262e0>] (spitzpm_read_devdata+0x5c/0xc4) [<c00262e0>] (spitzpm_read_devdata) from [<c0024094>] (sharpsl_check_battery_temp+0x78/0x110) [<c0024094>] (sharpsl_check_battery_temp) from [<c0024f9c>] (sharpsl_charge_toggle+0x48/0x110) [<c0024f9c>] (sharpsl_charge_toggle) from [<c004429c>] (process_one_work+0x14c/0x48c) [<c004429c>] (process_one_work) from [<c0044618>] (worker_thread+0x3c/0x5d4) [<c0044618>] (worker_thread) from [<c004a238>] (kthread+0xd0/0xec) [<c004a238>] (kthread) from [<c000a670>] (ret_from_fork+0x14/0x24) This can occur because the SPI controller driver (SPI_PXA2XX) is built as module and thus not necessarily loaded. While building SPI_PXA2XX into the kernel would make the problem disappear, it appears prudent to ensure that the driver is instantiated before accessing its data structures. Cc: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> 27 March 2016, 17:37:48 UTC
f55532a Linus Torvalds 26 March 2016, 23:03:24 UTC Linux 4.6-rc1 26 March 2016, 23:03:24 UTC
d5a38f6 Linus Torvalds 26 March 2016, 22:53:16 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph updates from Sage Weil: "There is quite a bit here, including some overdue refactoring and cleanup on the mon_client and osd_client code from Ilya, scattered writeback support for CephFS and a pile of bug fixes from Zheng, and a few random cleanups and fixes from others" [ I already decided not to pull this because of it having been rebased recently, but ended up changing my mind after all. Next time I'll really hold people to it. Oh well. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (34 commits) libceph: use KMEM_CACHE macro ceph: use kmem_cache_zalloc rbd: use KMEM_CACHE macro ceph: use lookup request to revalidate dentry ceph: kill ceph_get_dentry_parent_inode() ceph: fix security xattr deadlock ceph: don't request vxattrs from MDS ceph: fix mounting same fs multiple times ceph: remove unnecessary NULL check ceph: avoid updating directory inode's i_size accidentally ceph: fix race during filling readdir cache libceph: use sizeof_footer() more ceph: kill ceph_empty_snapc ceph: fix a wrong comparison ceph: replace CURRENT_TIME by current_fs_time() ceph: scattered page writeback libceph: add helper that duplicates last extent operation libceph: enable large, variable-sized OSD requests libceph: osdc->req_mempool should be backed by a slab pool libceph: make r_request msg_size calculation clearer ... 26 March 2016, 22:53:16 UTC
698f415 Linus Torvalds 26 March 2016, 19:59:04 UTC Merge tag 'ofs-pull-tag-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs filesystem from Mike Marshall. This finally merges the long-pending orangefs filesystem, which has been much cleaned up with input from Al Viro over the last six months. From the documentation file: "OrangeFS is an LGPL userspace scale-out parallel storage system. It is ideal for large storage problems faced by HPC, BigData, Streaming Video, Genomics, Bioinformatics. Orangefs, originally called PVFS, was first developed in 1993 by Walt Ligon and Eric Blumer as a parallel file system for Parallel Virtual Machine (PVM) as part of a NASA grant to study the I/O patterns of parallel programs. Orangefs features include: - Distributes file data among multiple file servers - Supports simultaneous access by multiple clients - Stores file data and metadata on servers using local file system and access methods - Userspace implementation is easy to install and maintain - Direct MPI support - Stateless" see Documentation/filesystems/orangefs.txt for more in-depth details. * tag 'ofs-pull-tag-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: (174 commits) orangefs: fix orangefs_superblock locking orangefs: fix do_readv_writev() handling of error halfway through orangefs: have ->kill_sb() evict the VFS side of things first orangefs: sanitize ->llseek() orangefs-bufmap.h: trim unused junk orangefs: saner calling conventions for getting a slot orangefs_copy_{to,from}_bufmap(): don't pass bufmap pointer orangefs: get rid of readdir_handle_s ornagefs: ensure that truncate has an up to date inode size orangefs: move code which sets i_link to orangefs_inode_getattr orangefs: remove needless wrapper around GFP_KERNEL orangefs: remove wrapper around mutex_lock(&inode->i_mutex) orangefs: refactor inode type or link_target change detection orangefs: use new getattr for revalidate and remove old getattr orangefs: use new getattr in inode getattr and permission orangefs: use new orangefs_inode_getattr to get size in write and llseek orangefs: use new orangefs_inode_getattr to create new inodes orangefs: rename orangefs_inode_getattr to orangefs_inode_old_getattr orangefs: remove inode->i_lock wrapper orangefs: put register_chrdev immediately before register_filesystem ... 26 March 2016, 19:59:04 UTC
b4cec5f Linus Torvalds 26 March 2016, 18:37:42 UTC Merge tag 'ntb-4.6' of git://github.com/jonmason/ntb Pull NTB bug fixes from Jon Mason: "NTB bug fixes for tasklet from spinning forever, link errors, translation window setup, NULL ptr dereference, and ntb-perf errors. Also, a modification to the driver API that makes _addr functions optional" * tag 'ntb-4.6' of git://github.com/jonmason/ntb: NTB: Remove _addr functions from ntb_hw_amd NTB: Make _addr functions optional in the API NTB: Fix incorrect clean up routine in ntb_perf NTB: Fix incorrect return check in ntb_perf ntb: fix possible NULL dereference ntb: add missing setup of translation window ntb: stop link work when we do not have memory ntb: stop tasklet from spinning forever during shutdown. ntb: perf test: fix address space confusion 26 March 2016, 18:37:42 UTC
895a106 Linus Torvalds 26 March 2016, 18:31:01 UTC Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull more SCSI updates from James Bottomley: "The only new stuff which missed the first pull request is an update to the UFS driver. The rest is an assortment of bug fixes and minor tweaks which appeared recently (some are fixes for recent code and some are stuff spotted recently by the checkers or the new gcc-6 compiler [most of Arnd's stuff])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi_common: do not clobber fixed sense information scsi: ufs: select CONFIG_NLS scsi: fc: use get/put_unaligned64 for wwn access fnic: move printk()s outside of the critical code section. qla2xxx: avoid maybe_uninitialized warning megaraid_sas: add missing curly braces in ioctl handler lpfc: fix misleading indentation scsi_transport_sas: add 'scsi_target_id' sysfs attribute scsi_dh_alua: uninitialized variable in alua_check_vpd() scsi: ufs-qcom: add printouts of testbus debug registers scsi: ufs-qcom: enable/disable the device ref clock scsi: ufs-qcom: set PA_Local_TX_LCC_Enable before link startup scsi: ufs: add device quirk delay before putting UFS rails in LPM scsi: ufs: fix leakage during link off state scsi: ufs: tune UniPro parameters to optimize hibern8 exit time scsi: ufs: handle non spec compliant bkops behaviour by device scsi: ufs: add retry for query descriptors scsi: ufs: add error recovery after DL NAC error scsi: ufs: make error handling bit faster scsi: ufs: disable vccq if it's not needed by UFS device ... 26 March 2016, 18:31:01 UTC
02fc59a Linus Torvalds 26 March 2016, 17:13:05 UTC f2fs/crypto: fix xts_tweak initialization Commit 0b81d07790726 ("fs crypto: move per-file encryption from f2fs tree to fs/crypto") moved the f2fs crypto files to fs/crypto/ and renamed the symbol prefixes from "f2fs_" to "fscrypt_" (and from "F2FS_" to just "FS" for preprocessor symbols). Because of the symbol renaming, it's a bit hard to see it as a file move: use git show -M30 0b81d07790726 to lower the rename detection to just 30% similarity and make git show the files as renamed (the header file won't be shown as a rename even then - since all it contains is symbol definitions, it looks almost completely different). Even with the renames showing as renames, the diffs are not all that easy to read, since so much is just the renames. But Eric Biggers noticed that it's not just all renames: the initialization of the xts_tweak had been broken too, using the inode number rather than the page offset. That's not right - it makes the xfs_tweak the same for all pages of each inode. It _might_ make sense to make the xfs_tweak contain both the offset _and_ the inode number, but not just the inode number. Reported-by: Eric Biggers <ebiggers3@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 March 2016, 17:13:05 UTC
4f1b50c Allen Hubbe 21 March 2016, 08:53:14 UTC NTB: Remove _addr functions from ntb_hw_amd Kernel zero day testing warned about address space confusion. A virtual iomem address was used where a physical address is expected. The offending functions implement an optional part of the api, so they are removed. They can be added later, after testing. Fixes: a1b3695820aa490e58915d720a1438069813008b Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Acked-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 26 March 2016, 15:44:33 UTC
4599649 Al Viro 25 March 2016, 23:56:34 UTC orangefs: fix orangefs_superblock locking * switch orangefs_remount() to taking ORANGEFS_SB(sb) instead of sb * remove from the list _before_ orangefs_unmount() - request_mutex in the latter will make sure that nothing observed in the loop in ORANGEFS_DEV_REMOUNT_ALL handling will get freed until the end of loop * on removal, keep the forward pointer and zero the back one. That way we can drop and regain the spinlock in the loop body (again, ORANGEFS_DEV_REMOUNT_ALL one) and still be able to get to the rest of the list. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 26 March 2016, 11:22:00 UTC
6d4c1a3 Al Viro 17 February 2016, 01:15:43 UTC orangefs: fix do_readv_writev() handling of error halfway through Error should only be returned if nothing had been read/written. Otherwise we need to report a short read/write instead. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 26 March 2016, 02:30:54 UTC
524b1d3 Al Viro 17 February 2016, 02:08:29 UTC orangefs: have ->kill_sb() evict the VFS side of things first Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 26 March 2016, 02:30:54 UTC
177f8fc Al Viro 17 February 2016, 01:25:19 UTC orangefs: sanitize ->llseek() a) open files can't have NULL inodes b) it's SEEK_END, not ORANGEFS_SEEK_END; no need to get cute. c) make_bad_inode() on lseek()? Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 26 March 2016, 02:30:54 UTC
7df240d Al Viro 17 February 2016, 01:12:04 UTC orangefs-bufmap.h: trim unused junk Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 26 March 2016, 02:30:54 UTC
b8a99a8 Al Viro 17 February 2016, 01:10:26 UTC orangefs: saner calling conventions for getting a slot just have it return the slot number or -E... - the caller checks the sign anyway Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 26 March 2016, 02:30:54 UTC
bf6bf60 Al Viro 17 February 2016, 01:06:19 UTC orangefs_copy_{to,from}_bufmap(): don't pass bufmap pointer it's always __orangefs_bufmap Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 26 March 2016, 02:30:54 UTC
9f5e2f7 Al Viro 17 February 2016, 00:54:13 UTC orangefs: get rid of readdir_handle_s no point, really - we couldn't keep those across the calls of getdents(); it would be too easy to DoS, having all slots exhausted. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 26 March 2016, 02:30:54 UTC
a212116 Srinivas Pandruvada 24 March 2016, 04:07:39 UTC ACPI / processor: Request native thermal interrupt handling via _OSC There are several reports of freeze on enabling HWP (Hardware PStates) feature on Skylake-based systems by the Intel P-states driver. The root cause is identified as the HWP interrupts causing BIOS code to freeze. HWP interrupts use the thermal LVT which can be handled by Linux natively, but on the affected Skylake-based systems SMM will respond to it by default. This is a problem for several reasons: - On the affected systems the SMM thermal LVT handler is broken (it will crash when invoked) and a BIOS update is necessary to fix it. - With thermal interrupt handled in SMM we lose all of the reporting features of the arch/x86/kernel/cpu/mcheck/therm_throt driver. - Some thermal drivers like x86-package-temp depend on the thermal threshold interrupts signaled via the thermal LVT. - The HWP interrupts are useful for debugging and tuning performance (if the kernel can handle them). The native handling of thermal interrupts needs to be enabled because of that. This requires some way to tell SMM that the OS can handle thermal interrupts. That can be done by using _OSC/_PDC in processor scope very early during ACPI initialization. The meaning of _OSC/_PDC bit 12 in processor scope is whether or not the OS supports native handling of interrupts for Collaborative Processor Performance Control (CPPC) notifications. Since on HWP-capable systems CPPC is a firmware interface to HWP, setting this bit effectively tells the firmware that the OS will handle thermal interrupts natively going forward. For details on _OSC/_PDC refer to: http://www.intel.com/content/www/us/en/standards/processor-vendor-specific-acpi-specification.html To implement the _OSC/_PDC handshake as described, introduce a new function, acpi_early_processor_osc(), that walks the ACPI namespace looking for ACPI processor objects and invokes _OSC for them with bit 12 in the capabilities buffer set and terminates the namespace walk on the first success. Also modify intel_thermal_interrupt() to clear HWP status bits in the HWP_STATUS MSR to acknowledge HWP interrupts (which prevents them from firing continuously). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject & changelog, function rename ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 26 March 2016, 01:00:38 UTC
606c61a Linus Torvalds 25 March 2016, 23:59:11 UTC Merge branch 'akpm' (patches from Andrew) Merge fourth patch-bomb from Andrew Morton: "A lot more stuff than expected, sorry. A bunch of ocfs2 reviewing was finished off. - mhocko's oom-reaper out-of-memory-handler changes - ocfs2 fixes and features - KASAN feature work - various fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (42 commits) thp: fix typo in khugepaged_scan_pmd() MAINTAINERS: fill entries for KASAN mm/filemap: generic_file_read_iter(): check for zero reads unconditionally kasan: test fix: warn if the UAF could not be detected in kmalloc_uaf2 mm, kasan: stackdepot implementation. Enable stackdepot for SLAB arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections mm, kasan: add GFP flags to KASAN API mm, kasan: SLAB support kasan: modify kmalloc_large_oob_right(), add kmalloc_pagealloc_oob_right() include/linux/oom.h: remove undefined oom_kills_count()/note_oom_kill() mm/page_alloc: prevent merging between isolated and other pageblocks drivers/memstick/host/r592.c: avoid gcc-6 warning ocfs2: extend enough credits for freeing one truncate record while replaying truncate records ocfs2: extend transaction for ocfs2_remove_rightmost_path() and ocfs2_update_edge_lengths() before to avoid inconsistency between inode and et ocfs2/dlm: move lock to the tail of grant queue while doing in-place convert ocfs2: solve a problem of crossing the boundary in updating backups ocfs2: fix occurring deadlock by changing ocfs2_wq from global to local ocfs2/dlm: fix BUG in dlm_move_lockres_to_recovery_list ocfs2/dlm: fix race between convert and recovery ocfs2: fix a deadlock issue in ocfs2_dio_end_io_write() ... 25 March 2016, 23:59:11 UTC
15dbc13 Linus Torvalds 25 March 2016, 23:55:37 UTC Merge tag 'pm+acpi-4.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixlet from Rafael Wysocki: "One of commits in my previous pull request changed the permissions of drivers/power/avs/rockchip-io-domain.c to executable by mistake" * tag 'pm+acpi-4.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Fix permissions of drivers/power/avs/rockchip-io-domain.c 25 March 2016, 23:55:37 UTC
back to top