Revision 9757810488e595638996e7b84dace5787733e9c6 authored by 1p on 18 April 2014, 01:54:37 UTC, committed by 1p on 18 April 2014, 01:54:37 UTC
1 parent fa07825
property.h
/** \file
* Properties and events.
*
*/
/*
* Copyright (C) 2009 Trammell Hudson <hudson+ml@osresearch.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#ifndef _property_h_
#define _property_h_
#define PROP_CAM_MODEL 0x00000002
#define PROP_BODY_ID 0x01000006
#define PROP_FIRMWARE_VER 0x02000001
#define PROP_OPTICAL_CORRECT_PARAM 0x0B000000
/** These are known */
#define PROP_BURST_COUNT 0x80030006
#define PROP_BAT_INFO 0x8003001d
#define PROP_TFT_STATUS 0x80030015
#define PROP_LENS_NAME 0x80030021
#define PROP_LENS_SOMETHING 0x80030022
//~ 5dc doesn't have a PROP_LENS.
#ifdef CONFIG_5DC
#define PROP_LENS 0x80030010
#else
#define PROP_LENS 0x80030011 // info about lens? flags?
#endif
#define PROP_HDMI_CHANGE 0x8003002c // 1 if HDMI display connected
#define PROP_HDMI_CHANGE_CODE 0x8003002e // edidc?
#define PROP_USBRCA_MONITOR 0x80030018
#define PROP_MVR_REC_START 0x80030033 // 0 = no, 1 = stating, 2 = recording
/** 0x02010000 - 0x02010014 == card state? */
#define PROP_REC_TIME 0x80030005 // time remaining. output at 1 Hz while recording
/** These are good guesses */
#define PROP_GUI_STATE 0x80020000 // 0 == IDLE, 1 == PLAYMENU?, 2 = menu->disp, 3 == START_QR_MODE, 9 = Q menu
#define PROP_LIVE_VIEW_FACE_AF 0x0205000A
#define PROP_LV_LOCK 0x80050021
#define PROP_LV_ACTION 0x80050022 // 0 == LV_START, 1 == LV_STOP
/** These are guesses */
#define PROP_LCD_POSITION 0x80040020 // 0 = like on non-flippable, 1 = backwards, 2 = flipped outside
#define PROP_USBDEVICE_CONNECT 0x8004000a
#define PROP_MVR_MOVW_START0 0x80000020 // not sure?
#define PROP_MVR_MOVW_START1 0x80000021
#define PROP_AF_MODE 0x80000004
#define AF_MODE_ONE_SHOT 0
#define AF_MODE_MANUAL_FOCUS 3
#define AF_MODE_AI_FOCUS 202 // TODO: seems to be model-specific or bit operation
#define AF_MODE_AI_SERVO 101 // TODO: seems to be model-specific or bit operation
#define PROP_MVR_REC 0x80030002
#define PROP_LV_LENS 0x80050000
#define PROP_LV_0004 0x80050004
#define PROP_LV_LENS_STABILIZE 0x80050005 // 0 = off, e0000 = on
#define PROP_LV_MANIPULATION 0x80050006
#define PROP_LV_AFFRAME 0x80050007 // called by ptp handler 915a
#define PROP_LV_FOCUS 0x80050001 // only works in liveview mode; LVCAF_LensDriveStart
#define PROP_LV_FOCUS_DONE 0x80050002 // output when focus motor is done?
#define PROP_LV_FOCUS_STOP 0x80050003 // LVCAF_LensDriveStop
#define PROP_LV_FOCUS_BAD 0x80050029 // true if camera couldn't focus?
#define PROP_LV_FOCUS_STATE 0x80050009 // 1 OK, 101 bad, 201 not done?
#define PROP_LV_FOCUS_CMD 0x80050027 // 3002 = full speed, 4/5 = slow, 6 = fine tune?
#define PROP_LV_FOCUS_DATA 0x80050026 // 8 integers; updates quickly when AF is active
#define PROP_LVAF_0003 0x80050003
#define PROP_LVAF_001D 0x8005001d // LVCAF_LensSearchDriveStart
#define PROP_LV_STATE 0x8005000f // output very often
#define PROP_LV_DISPSIZE 0x80050015 // used to control LV zoom (1 / 5 / A)
#define PROP_LVCAF_STATE 0x8005001B // unknown meaning
#define PROP_HALF_SHUTTER 0x8005000a // two bytes, 1==held; only updated in LV mode
#define PROP_ORIENTATION 0x8005000d // 0 == 0 deg, 1 == +90 deg, 2 == -90 deg
#define PROP_LV_LENS_DRIVE_REMOTE 0x80050013 // what values?!
#ifdef CONFIG_EOSM
#define PROP_LV_FOCAL_DISTANCE 0x80050045
#endif
#define PROP_APERTURE2 0x8000002d
#define PROP_APERTURE3 0x80000036
#define PROP_LIVE_VIEW_VIEWTYPE 0x80000034
#define PROP_MODE 0x80000001 // maybe; set in FA_DISP_COM
#define PROP_DRIVE 0x80000003
#define DRIVE_SINGLE 0
#define DRIVE_SELFTIMER_REMOTE 0x10
#ifdef CONFIG_5DC
#define DRIVE_SELFTIMER_2SEC 0x10
#else
#define DRIVE_SELFTIMER_2SEC 0x11
#endif
#define DRIVE_SELFTIMER_CONTINUOUS 7
#if defined(CONFIG_60D) || defined(CONFIG_7D)
#define DRIVE_HISPEED_CONTINUOUS 4
#define DRIVE_CONTINUOUS 5
#elif defined(CONFIG_5D3)
#define DRIVE_HISPEED_CONTINUOUS 4
#define DRIVE_CONTINUOUS 5
#define DRIVE_SILENT 0x13
#define DRIVE_SILENT_CONTINUOUS 0x14
#elif defined(CONFIG_6D)
#define DRIVE_CONTINUOUS 1
#define DRIVE_SILENT 0x13
#define DRIVE_SILENT_CONTINUOUS 0x14
#else
#define DRIVE_CONTINUOUS 1
#endif
#define PROP_SHUTTER 0x80000005
#define PROP_SHUTTER_ALSO 0x8000002c
#define PROP_SHUTTER_RANGE 0x80000035 // Len=4, 6D:100098 30" & 1/4k
#define PROP_APERTURE 0x80000006
#define PROP_ISO 0x80000007
#ifndef CONFIG_NO_AUTO_ISO_LIMITS
#define PROP_AUTO_ISO_RANGE 0x8000003b // len=2, LSB is max iso, MSB is min iso (ignored?)
#endif
#define PROP_AE 0x80000008 // signed 8-bit value
#define PROP_UILOCK 0x8000000b // maybe?
#define PROP_ISO_AUTO 0x8000002E // computed by AUTO ISO if PROP_ISO is 0; otherwise, equal to PROP_ISO; in movie mode, is 0 unless you half-press shutter
#define PROP_SHUTTER_RELEASE 0x8003000A
#define PROP_AVAIL_SHOT 0x80030005
#define PROP_MIC_INSERTED 0x8003002b
/** These need to be found */
#define PROP_LCD_STATE error_must_be_found
/** These are used by DL: 8002000C, 80030014, 100000E, 80020013 */
// These come form master result cbr
#define PROP_SENSOR 0x80020002
#define PROP_DEFAULT_CAMERA 0x80020003
#define PROP_DEFAULT_CFN 0x80020004
#define PROP_DEFALT_AF_SHIFT 0x80020005
#define PROP_DEFAULT_LV_MANIP 0x80020006
#define PROP_DISPSENSOR_CTRL 0x80020010 // 1 == show results?
#define PROP_LV_OUTPUT_DEVICE 0x80050011 // 1 == LCD?
#define PROP_HOUTPUT_TYPE 0x80030030 // 0 = no info displayed in LV, 1 = info displayed (this is toggled with DISP)
#define PROP_MIRROR_DOWN 0x8005001C
#define PROP_LV_EXPSIM 0x80050023
#define PROP_MYMENU_LISTING 0x80040009
#define PROP_LV_MOVIE_SELECT 0x8004001C // 0=DisableMovie, 1=? or 2=EnableMovie
#define LVMS_DISABLE_MOVIE 0
#define LVMS_ENABLE_MOVIE 2
#define PROP_SHOOTING_TYPE 0x80040004 // 0 == NORMAL, 3 == LV, 4 == MOVIE
#define PROP_ERR_BATTERY 0x80030020
#define PROP_CUSTOM_SETTING 0x80020007
#define PROP_DEFAULT_CUSTOM 0x80020008
#define PROP_DEFAULT_BRACKET 0x8002000A
#define PROP_PARTIAL_SETTING 0x8002000B
#define PROP_EMPOWER_OFF 0x80030007 // 1 == prohibit, 2 == permit
#define PROP_LVAF_MODE 0x8004001d // 0 = shutter killer, 1 = live mode, 2 = face detect
#define PROP_ACTIVE_SWEEP_STATUS 0x8002000C // 1 == cleaning sensor?
#ifndef CONFIG_5DC
#define PROP_DL_ACTION 0x80020013 // 0 == end?
#endif
#ifdef CONFIG_5DC
#define PROP_EFIC_TEMP 0x80030013
#else
#define PROP_EFIC_TEMP 0x80030014
#endif
#define PROP_EFIC_TEMP_MAYBE 0x010100ed
//#define PROP_BATTERY_RAW_LEVEL_MAYBE 0x80030014
#define PROP_ARTIST_STRING 0x0E070000
#define PROP_COPYRIGHT_STRING 0x0E070001
#define PROP_LANGUAGE 0x02040002
#define PROP_VIDEO_SYSTEM 0x02040003
#define PROP_DATE_FORMAT 0x02040005
#define DATE_FORMAT_YYYY_MM_DD 0
#define DATE_FORMAT_MM_DD_YYYY 1
#define DATE_FORMAT_DD_MM_YYYY 2
#define PROP_ICU_UILOCK 0x80020009
#define UILOCK_NONE 0x41000000
#define UILOCK_EVERYTHING_EXCEPT_POWEROFF_AND_MODEDIAL 0x4100014f
#define UILOCK_EVERYTHING 0x4100017f
#define UILOCK_SHUTTER 0x41000001
#define UILOCK_ARROWS 0x41000008
#define UILOCK_MODE_DIAL 0x41000010
#define UILOCK_POWER_SW 0x41000020
#define PROP_SHOOTING_MODE 0x80000000 // During mode switch, it takes other values.
#define PROP_SHOOTING_MODE_2 0x80000001 // for custom modes
#define SHOOTMODE_P 0
#define SHOOTMODE_TV 1
#define SHOOTMODE_AV 2
#define SHOOTMODE_M 3
#define SHOOTMODE_BULB 4
#define SHOOTMODE_ADEP 5
#define SHOOTMODE_C 7
#define SHOOTMODE_C2 0x10
#define SHOOTMODE_C3 0x11
#define SHOOTMODE_CA 0x13
#define SHOOTMODE_AUTO 9
#define SHOOTMODE_NOFLASH 0xF
#define SHOOTMODE_PORTRAIT 0xC
#define SHOOTMODE_LANDSCAPE 0xD
#define SHOOTMODE_MACRO 0xE
#define SHOOTMODE_SPORTS 0xB
#define SHOOTMODE_NIGHT 0xA
#define SHOOTMODE_MOVIE 0x14
// WB in LiveView (and movie) mode
#define PROP_WB_MODE_LV 0x80050018 // 0=AWB, 1=sun, 8=shade, 2=clouds, 3=tungsten, 4=fluorescent, 5=flash, 6=custom, 9 = kelvin
#define PROP_WB_KELVIN_LV 0x80050019
// WB in photo mode
#define PROP_WB_MODE_PH 0x8000000D
#define PROP_WB_KELVIN_PH 0x8000000E
// values of PROP_WB_MODE_*:
#define WB_AUTO 0
#define WB_SUNNY 1
#define WB_SHADE 8
#define WB_CLOUDY 2
#define WB_TUNGSTEN 3
#define WB_FLUORESCENT 4
#define WB_FLASH 5
#define WB_CUSTOM 6
#define WB_KELVIN 9
#define PROP_WBS_GM 0x80000010 // signed 8-bit, len=4
#define PROP_WBS_BA 0x80000011 // idem
#define PROP_CUSTOM_WB 0x2020000 // len=52, contains multipliers at 0x20 [B?], 0x24 [G], 0x26 [R?] as int16, 1024=1
#define PROP_METERING_MODE 0x80000002
#define SPOT_METER 1
#define EVAL_METER 3
#define PARTIAL_METER 4
#define CENTERW_METER 5
#define PROP_LAST_JOB_ID 0x02050001 // maybe?
#ifdef CONFIG_5DC
#define PROP_PICTURE_STYLE 0x80000020
#else
#define PROP_PICTURE_STYLE 0x80000028 // 0x81 = std, 82 = portrait, 83 = landscape, 84 = neutral, 85 = faithful, 86 = monochrome, 21 = user 1, 22 = user 2, 23 = user 3
#endif
#define PROP_PICSTYLE_SETTINGS_STANDARD 0x02060001 // 02060001 for std, 02060002 for portrait... 02060007 for user 1 ... 02060009 for user 3
#define PROP_PICSTYLE_SETTINGS_PORTRAIT 0x02060002
#define PROP_PICSTYLE_SETTINGS_LANDSCAPE 0x02060003
#define PROP_PICSTYLE_SETTINGS_NEUTRAL 0x02060004
#define PROP_PICSTYLE_SETTINGS_FAITHFUL 0x02060005
#define PROP_PICSTYLE_SETTINGS_MONOCHROME 0x02060006
#define PROP_PICSTYLE_SETTINGS_USERDEF1 0x02060007
#define PROP_PICSTYLE_SETTINGS_USERDEF2 0x02060008
#define PROP_PICSTYLE_SETTINGS_USERDEF3 0x02060009
#define PROP_PICSTYLE_OF_USERDEF1 0x0206000a
#define PROP_PICSTYLE_OF_USERDEF2 0x0206000b
#define PROP_PICSTYLE_OF_USERDEF3 0x0206000c
#define PROP_PICSTYLE_SETTINGS_AUTO 0x0206001e // 600D only
#define PROP_PC_FLAVOR1_PARAM 0x4010001
#define PROP_PC_FLAVOR2_PARAM 0x4010003
#define PROP_PC_FLAVOR3_PARAM 0x4010005
#ifdef CONFIG_7D
#define PROP_ALO 0x02050012
#else
#define PROP_ALO 0x8000003D
#endif
#define ALO_STD 0
#define ALO_LOW 1
#define ALO_HIGH 2
#define ALO_OFF 3
#if defined(CONFIG_5D3)
#define PROP_HTP 0x8000004a
#define PROP_MULTIPLE_EXPOSURE 0x0202000c
#define PROP_MLU 0x80000047
#endif
#ifdef CONFIG_GPS
#define PROP_GPS 0x8004004c // 0 - Off 1 - External 2 - Internal
#define PROP_BUILTINGPS_INTERVAL 0x80040054
/* to debug GPS code on cameras without GPS (fake it with WB mode) */
#ifdef CONFIG_GPS_FAKE
#undef PROP_GPS
#define PROP_GPS PROP_WB_MODE_PH
#endif
#endif
#ifdef CONFIG_6D //May work for others.
#define PROP_HI_ISO_NR 0x80000049 //Len 4, 4 is multishot
#define PROP_HTP 0x8000004a
#define PROP_MULTIPLE_EXPOSURE 0x0202000c
#define PROP_MULTIPLE_EXPOSURE_SETTING 0x8000003F
#define PROP_MLU 0x80000047
#define PROP_AFFRAME_ENABLE_SETTING 0x8003004F //LV I think
#define PROP_BT_DEVICE_CONNECT 0x2070008
#define PROP_AF_METHOD_SELECT_FOCUS_AREA 0x80000046
#define PROP_VIDEOSNAP_MODE 0x80000041
//Passwords around 0x77cb4 but no dialog :( Def=0000
//0x2 Restricted Mode (mymenu only) /0x1 Normal? /0x0 Off
#define PROP_PHOTO_STUDIO_MODE 0x80040016
#define PROP_GPS_TIME_SYNC 0x80040045
#define PROP_GUIGROUND_STATE 0x80020011
#define PROP_STROBO_SYNC_AV 0x8000004c //Array 0x77C04
#define PROP_MOVIE_REC_VOLUME 0x2050017 //Len 4, Vol00Vol
#define PROP_HEADPHONE_PHYSICAL_CONNECT 0x80030055
#endif
/** Job progress
* 0xB == capture end?
* 0xA == start face catch pass?
* 0x8 == "guiSetDarkBusy" -- noise reduction?
* 0x0 == Job Done
*/
#ifdef CONFIG_5DC
#define PROP_LAST_JOB_STATE 0x80030011
#else
#define PROP_LAST_JOB_STATE 0x80030012 // 8 == writing to card, 0 = idle, B = busy.
#endif
#define PROP_STROBO_FIRING 0x80040013 // 0 = enable, 1 = disable, 2 = auto?
#define PROP_STROBO_ETTLMETER 0x80040014 // 0 = evaluative, 1 = average
#define PROP_STROBO_CURTAIN 0x80040015 // 0 = first, 1 = second
#define PROP_STROBO_AECOMP 0x80000009 // in 1/8 EV steps, 8-bit signed, len=4
#define PROP_STROBO_SETTING 0x80030038 // len=22
#define PROP_STROBO_REDEYE 0x80000025 // 1 = enable, 0 = disable
#define PROP_POPUP_BUILTIN_FLASH 0x80020019 // request with 1
//strobo_setting[0] & 0xFF000000 = strobo_aecomp << 24
//strobo_setting[1] & 2 = 2 if strobo_curtain else 0
//strobo_setting[1] & 8 = 8 if e-ttl meter = average else 0
#define PROP_LCD_BRIGHTNESS 0x2040000 // 1 .. 7
#define PROP_LCD_BRIGHTNESS_MODE 0x204000D // 0=auto, 1=manual (5D)
#define PROP_LCD_BRIGHTNESS_AUTO_LEVEL 0x204000C // dark, normal, bright? (5D)
/** Gui properties? 0xffc509b0 @ 0xDA */
#define PROP_STROBO_FIRING 0x80040013 // 0 = enable, 1 = disable?
#define PROP_MOVIE_SIZE_50D 0x205000C
#ifdef CONFIG_500D
#define PROP_VIDEO_MODE 0x2050010
// buf[0]: 0 if 1080p, 1 if 720p, 2 if 480p
// buf[1]: 14 if 1080p (20fps), 1e if 720p or 480p (30fps)
// buf[2]: a if 1080p (1/2 of 20fps??), f if 720p or 480p (1/2 of 30fps??)
#else
#define PROP_VIDEO_MODE 0x80000039
// buf[0]: 8 if crop else 0
// buf[1]: 0 if full hd, 1 if 720p, 2 if 680p
// buf[2]: fps
// buf[3]: GoP
#endif
#define PROP_DOF_PREVIEW_MAYBE 0x8005000B
#define PROP_REMOTE_SW1 0x80020015
#define PROP_REMOTE_SW2 0x80020016
#define PROP_PROGRAM_SHIFT 0x80000033
#define PROP_QUICKREVIEW 0x2020006
#define PROP_QUICKREVIEW_MODE 0x2020005
#define PROP_REMOTE_AFSTART_BUTTON 0x80020017
#define PROP_REMOTE_BULB_RELEASE_END 0x8002000F
#define PROP_REMOTE_BULB_RELEASE_START 0x8002000E
#define PROP_REMOTE_RELEASE 0x8003000A
#define PROP_REMOTE_SET_BUTTON 0x80020018
/* some properties found while reverse engineering */
#define PROP_FA_ADJUST_FLAG 0x80040000
#if defined(CONFIG_VXWORKS)
#define PROP_FOLDER_NUMBER 0x2010000
#define PROP_FILE_NUMBER 0x2010002
#define PROP_CARD_RECORD 0x8003000B
#define PROP_CLUSTER_SIZE 0x2010004
#define PROP_FREE_SPACE 0x2010006
#else // DryOS
#define PROP_CARD_SELECT 0x80040002 // 1=CF, 2=SD
// CF card
#define PROP_FOLDER_NUMBER_A 0x02010000
#define PROP_FILE_NUMBER_A 0x02010003
#define PROP_CLUSTER_SIZE_A 0x02010006
#define PROP_FREE_SPACE_A 0x02010009
#define PROP_CARD_RECORD_A 0x8003000b
// SD card
#define PROP_FOLDER_NUMBER_B 0x02010001
#define PROP_FILE_NUMBER_B 0x02010004
#define PROP_CLUSTER_SIZE_B 0x02010007
#define PROP_FREE_SPACE_B 0x0201000a
#define PROP_CARD_RECORD_B 0x8003000c
// WFT drive
#define PROP_FOLDER_NUMBER_C 0x02010002
#define PROP_FILE_NUMBER_C 0x02010005
#define PROP_CLUSTER_SIZE_C 0x02010008
#define PROP_FREE_SPACE_C 0x0201000b
#define PROP_CARD_RECORD_C 0x8003000d
#endif
#define PROP_USER_FILE_PREFIX 0x02050004
#define PROP_SELECTED_FILE_PREFIX 0x02050008
#define PROP_CARD_COVER 0x8003002F
#define PROP_TERMINATE_SHUT_REQ 0x80010001
#define PROP_BUTTON_ASSIGNMENT 0x80010007
#define PROP_PIC_QUALITY 0x8000002f
#define PROP_PIC_QUALITY2 0x80000030
#define PROP_PIC_QUALITY3 0x80000031
#define PICQ_RAW 0x4060000
#define PICQ_MRAW 0x4060001
#define PICQ_SRAW 0x4060002
#define PICQ_RAW_JPG_LARGE_FINE 0x3070000
#define PICQ_MRAW_JPG_LARGE_FINE 0x3070001
#define PICQ_SRAW_JPG_LARGE_FINE 0x3070002
#define PICQ_RAW_JPG_MED_FINE 0x3070100
#define PICQ_MRAW_JPG_MED_FINE 0x3070101
#define PICQ_SRAW_JPG_MED_FINE 0x3070102
#define PICQ_RAW_JPG_SMALL_FINE 0x3070200
#define PICQ_MRAW_JPG_SMALL_FINE 0x3070201
#define PICQ_SRAW_JPG_SMALL_FINE 0x3070202
#define PICQ_LARGE_FINE 0x3010000
#define PICQ_LARGE_COARSE 0x2010000
#define PICQ_MED_FINE 0x3010100
#define PICQ_MED_COARSE 0x2010100
#define PICQ_SMALL_FINE 0x3010200
#define PICQ_SMALL_COARSE 0x2010200
#ifdef CONFIG_5DC
#define PROP_IMAGE_REVIEW_TIME 0x0202000b
#else
#define PROP_IMAGE_REVIEW_TIME 0x02020006 // 0, 2, 4, 8, ff
#endif
#define PROP_BATTERY_REPORT 0x8003001D
#define PROP_BATTERY_HISTORY 0x0204000F
#define PROP_BATTERY_CHECK 0x80030013
#define PROP_BATTERY_POWER 0x80030004
#define PROP_AE_MODE_MOVIE 0x8000003a
#define PROP_WINDCUT_MODE 0x02050016
#define PROP_SCREEN_COLOR 0x0204000b
#define PROP_ROLLING_PITCHING_LEVEL 0x80030039
#define PROP_VRAM_SIZE_MAYBE 0x8005001f
#define PROP_ICU_AUTO_POWEROFF 0x80030024
#define PROP_AUTO_POWEROFF_TIME 0x80000024
#define PROP_REBOOT_MAYBE 0x80010003 // used by firmware update code
#define PROP_DIGITAL_ZOOM_RATIO 0x8005002f
#define PROP_INFO_BUTTON_FUNCTION 0x02070006
#define PROP_CONTINUOUS_AF_MODE 0x80000042
#define PROP_CONTINUOUS_AF_VALID 0x80000043 //also toggles servo
#define PROP_REGISTRATION_DATA_UPDATE_FUNC 0x80000044 // custom slave cBr?
#define PROP_MOVIE_REC_AF 0x8000003C
// #define PROP_AF_CURRENT_AISERVO_STYLE 0x8004004B
#define PROP_LIMITED_TV_VALUE_AT_AUTOISO 0x80040034
#define PROP_LOUDNESS_BUILT_IN_SPEAKER 0x205001B
#define PROP_LED_LIGHT 0x80030042
#define PROP_AFSHIFT_LVASSIST_STATUS 0x8003003D
#define PROP_AFSHIFT_LVASSIST_SHIFT_RESULT 0x8003003E
#define PROP_MULTIPLE_EXPOSURE_CTRL 0x80070001
#define PROP_MIRROR_DOWN_IN_MOVIE_MODE 0x80030034
//~ #define PROP_CARD2_CLUSTER_SIZE 0x2010007
#define PROP_SHUTTER_COUNTER 0x80030029
#define PROP_AFPOINT 0x8000000A // len=70x8003004F
#define PROP_BEEP 0x80000023
#define PROP_ELECTRIC_SHUTTER 0x80040011
#ifdef CONFIG_5D2
#define PROP_MOVIE_SOUND_RECORD 0x2050015
#else
#define PROP_MOVIE_SOUND_RECORD 0x205000E
#endif
#define PROP_LOGICAL_CONNECT 0x8003000e
#define PROP_BV 0x80050010
#define PROP_LV_BV 0x80050008
#define PROP_STROBO_CHARGE_INFO_MAYBE 0x8005000C
#define PROP_ONESHOT_RAW 0x80000037
#define PROP_DCIM_DIR_SUFFIX 5 // :)
#define PROP_FILE_PREFIX 0x1000007
#define PROP_AEB 0x8000000B
#ifdef CONFIG_600D
#define PROP_PLAYMODE_VOL_CHANGE_600D 0x205000F //volume change when playing a video by wheel
#define PROP_AUDIO_VOL_CHANGE_600D 0x2050017 //volume change finished from Cannon Audio menu
#define PROP_PLAYMODE_LAUNCH_600D 0x205000D //Playmode and Q(Quick setting menu) launched
#endif
/** Properties */
extern void
prop_register_slave(
unsigned * property_list,
unsigned count,
void * (*prop_handler)(
unsigned property,
void * priv,
void * addr,
unsigned len
),
void * priv,
void (*token_handler)( void * token )
);
// prop
void prop_request_change( unsigned property, const void* addr, size_t len );
/** Get the current value of a property.
*
* int* data = 0;
* int len = 0;
* int err = prop_get_value(prop, &data, &len);
*
* Returns 0 on success.
*/
// int prop_get_value( unsigned property, void** addr, size_t* len );
int prop_request_change_wait(unsigned property, const void* addr, size_t len, int timeout);
extern void
prop_deliver(
uint32_t prop,
void * buf,
size_t len,
uint32_t mzb
);
struct prop_handler
{
unsigned property;
uint16_t property_length;
uint16_t property_ack;
void (*handler)(
unsigned property,
void * priv,
void * addr,
unsigned len
);
};
/** Configure a property handler; only necessary if not using automated functions */
extern void
prop_handler_init(
struct prop_handler * handler
);
/* add property handler to dynamic property list. need to run prop_update_registration() afterwards */
void prop_add_handler (uint32_t property, void *handler);
/* reset handler setup to the state after startup */
void prop_reset_registration(void);
/* only re-register handlers in case it was updated in meantime */
void prop_update_registration(void);
/** Register a property handler with automated token function. module.h will define it for modules */
#if !defined(MODULE)
#define REGISTER_PROP_HANDLER_EX( id, func, length ) \
__attribute__((section(".prop_handlers"))) \
__attribute__((used)) \
static struct prop_handler _prop_handler_##id##_block = { \
.handler = func, \
.property = id, \
.property_length = length, \
}
#define REGISTER_PROP_HANDLER( id, func ) REGISTER_PROP_HANDLER_EX( id, func, 0 )
#define PROP_HANDLER(id) \
static void _prop_handler_##id(); \
REGISTER_PROP_HANDLER( id, _prop_handler_##id ); \
void _prop_handler_##id( \
unsigned property, \
void * token, \
uint32_t * buf, \
unsigned len \
) \
#define PROP_INT(id,name) \
volatile uint32_t name; \
PROP_HANDLER(id) { \
name = buf[0]; \
}
#endif
#include "propvalues.h"
#endif
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...