Revision 98873f53becea9a8a46972ff252e96fe575b120d authored by Ralf Baechle on 09 December 2008, 17:58:46 UTC, committed by Ralf Baechle on 09 December 2008, 21:55:43 UTC
Certain X11 servers such as the SIS server will only work if PCI mmap is implemented. This patch implements PCI mmap but to be on the same side so close to a release it only supports uncached mappings so performance will not be optimal for some uses such as framebuffers. Thanks to Zhang Le <r0bertz@gentoo.org> for the original report and testing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
1 parent bbeba4c
Makefile
#
# kbuild file for firmware/
#
# Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
# leading /, it's relative to $(srctree).
fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
# There are three cases to care about:
# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
# include the firmware files to include, according to .config
# 2. 'make modules_install', which will install firmware for modules, and
# _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
# 3. 'make firmware_install', which installs all firmware, unconditionally.
# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
# But be aware that the config file might not be included at all.
fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
ess/maestro3_assp_minisrc.fw
fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
sb16/ima_adpcm_init.csp \
sb16/ima_adpcm_playback.csp \
sb16/ima_adpcm_capture.csp
fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
yamaha/ds1e_ctrl.fw
fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
emi26/bitstream.fw
fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
emi62/spdif.fw emi62/midi.fw
fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
kaweth/new_code_fix.bin \
kaweth/trigger_code_fix.bin
ifdef CONFIG_FIRMWARE_IN_KERNEL
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
else
fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \
keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \
keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \
keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
endif
fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw
fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
edgeport/down.fw edgeport/down2.fw
fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
# whiteheat_loader_debug.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
# Directories which we _might_ need to create, so we have a rule for them.
firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all))))
quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@)
cmd_mkdir = mkdir -p $@
quiet_cmd_ihex = IHEX $@
cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@
quiet_cmd_ihex2fw = IHEX2FW $@
cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
quiet_cmd_h16tofw = H16TOFW $@
cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
quiet_cmd_fwbin = MK_FW $@
cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \
firmware/%.gen.S,%,$@))))"; \
ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long); \
ASM_ALIGN=$(if $(CONFIG_64BIT),3,2); \
PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \
echo "/* Generated by firmware/Makefile */" > $@;\
echo " .section .rodata" >>$@;\
echo " .p2align $${ASM_ALIGN}" >>$@;\
echo "_fw_$${FWSTR}_bin:" >>$@;\
echo " .incbin \"$(2)\"" >>$@;\
echo "_fw_end:" >>$@;\
echo " .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
echo " .p2align $${ASM_ALIGN}" >>$@;\
echo "_fw_$${FWSTR}_name:" >>$@;\
echo " .string \"$$FWNAME\"" >>$@;\
echo " .section .builtin_fw,\"a\",$${PROGBITS}" >>$@;\
echo " .p2align $${ASM_ALIGN}" >>$@;\
echo " $${ASM_WORD} _fw_$${FWSTR}_name" >>$@;\
echo " $${ASM_WORD} _fw_$${FWSTR}_bin" >>$@;\
echo " $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin" >>$@;
# One of these files will change, or come into existence, whenever
# the configuration changes between 32-bit and 64-bit. The .S files
# need to change when that happens.
wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
include/config/ppc32.h include/config/ppc64.h \
include/config/superh32.h include/config/superh64.h \
include/config/x86_32.h include/config/x86_64.h)
# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
# It'll end up depending on these targets, so make them a PHONY rule which
# depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
$(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
@true
# For the $$(dir %) trick, where we need % to be expanded first.
.SECONDEXPANSION:
$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
| $(objtree)/$$(dir %)
$(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
$(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
$(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
# The .o files depend on the binaries directly; the .S files don't.
$(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
$(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
# .ihex is used just as a simple way to hold binary files in a source tree
# where binaries are frowned upon. They are directly converted with objcopy.
$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex)
# Don't depend on ihex2fw if we're installing and it already exists.
# Putting it after | in the dependencies doesn't seem sufficient when
# we're installing after a cross-compile, because ihex2fw has dependencies
# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and
# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
# is exported read-only for someone to run 'make install'.
ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
ihex2fw_dep :=
else
ihex2fw_dep := $(obj)/ihex2fw
endif
# .HEX is also Intel HEX, but where the offset and length in each record
# is actually meaningful, because the firmware has to be loaded in a certain
# order rather than as a single binary blob. Thus, we convert them into our
# more compact binary representation of ihex records (<linux/ihex.h>)
$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex2fw)
# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,h16tofw)
$(firmware-dirs):
$(call cmd,mkdir)
obj-y += $(patsubst %,%.gen.o, $(fw-external-y))
obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
# Remove .S files and binaries created from ihex
# (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
$(shell find $(obj) -name \*.gen.S 2>/dev/null))
# Without this, built-in.o won't be created when it's empty, and the
# final vmlinux link will fail.
obj-n := dummy
hostprogs-y := ihex2fw
Computing file changes ...
