98873f5 | Ralf Baechle | 09 December 2008, 17:58:46 UTC | MIPS: Better than nothing implementation of PCI mmap to fix X. Certain X11 servers such as the SIS server will only work if PCI mmap is implemented. This patch implements PCI mmap but to be on the same side so close to a release it only supports uncached mappings so performance will not be optimal for some uses such as framebuffers. Thanks to Zhang Le <r0bertz@gentoo.org> for the original report and testing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 09 December 2008, 21:55:43 UTC |
bbeba4c | Linus Torvalds | 05 December 2008, 05:45:44 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: [PATCH] fix bogus argument of blkdev_put() in pktcdvd [PATCH 2/2] documnt FMODE_ constants [PATCH 1/2] kill FMODE_NDELAY_NOW [PATCH] clean up blkdev_get a little bit [PATCH] Fix block dev compat ioctl handling [PATCH] kill obsolete temporary comment in swsusp_close() | 05 December 2008, 05:45:44 UTC |
6df944c | Linus Torvalds | 05 December 2008, 05:44:40 UTC | Merge branch 'drm-gem-update' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-gem-update' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: Return error in i915_gem_set_to_gtt_domain if we're not in the GTT. drm/i915: Retry execbuffer pinning after clearing the GTT drm/i915: Move the execbuffer domain computations together drm/i915: Rename object_set_domain to object_set_to_gpu_domain drm/i915: Make a single set-to-cpu-domain path and use it wherever needed. drm/i915: Make a single set-to-gtt-domain path. drm/i915: If interrupted while setting object domains, still emit the flush. drm/i915: Move flushing list cleanup from flush request retire to request emit. drm/i915: Respect GM965/GM45 bit-17-instead-of-bit-11 option for swizzling. | 05 December 2008, 05:44:40 UTC |
341e558 | Linus Torvalds | 05 December 2008, 05:44:03 UTC | Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc/83xx: Enable FIXED_PHY in mpc834x_itx and mpc83xx defconfigs | 05 December 2008, 05:44:03 UTC |
aaad077 | Rafael J. Wysocki | 05 December 2008, 00:07:51 UTC | ACPI: Fix ACPI battery regression introduced by commit 558073 Commit 558073dd56707864f09d563b64e7c37c021e89d2 ("ACPI: battery: Convert discharge energy rate to current properly") caused the battery subsystem to report wrong values of the remaining time on battery power and the time until fully charged on Toshiba Portege R500 (and presumably on other boxes too). Fix the issue by correcting the conversion from mW to mA. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 December 2008, 05:43:16 UTC |
4857339 | Linus Torvalds | 05 December 2008, 05:40:29 UTC | Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: time: catch xtime_nsec underflows and fix them posix-cpu-timers: fix clock_gettime with CLOCK_PROCESS_CPUTIME_ID | 05 December 2008, 05:40:29 UTC |
0efcafb | Linus Torvalds | 05 December 2008, 05:40:17 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Sync FPU state in VIS emulation handler. sparc64: Fix VIS emulation bugs sparc: asm/bitops.h should define __fls sparc64: Fix bug in PTRACE_SETFPREGS64 handling. | 05 December 2008, 05:40:17 UTC |
e948990 | Linus Torvalds | 05 December 2008, 05:40:08 UTC | Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix early panic with boot option "nosmp" x86/oprofile: fix Intel cpu family 6 detection oprofile: fix CPU unplug panic in ppro_stop() AMD IOMMU: fix possible race while accessing iommu->need_sync AMD IOMMU: set device table entry for aliased devices AMD IOMMU: struct amd_iommu remove padding on 64 bit x86: fix broken flushing in GART nofullflush path x86: fix dma_mapping_error for 32bit x86 | 05 December 2008, 05:40:08 UTC |
2b218ae | Linus Torvalds | 05 December 2008, 05:39:55 UTC | Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: don't export sched_mc_power_savings in laptops | 05 December 2008, 05:39:55 UTC |
3b666ce | Linus Torvalds | 05 December 2008, 05:39:41 UTC | Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: check_hung_task(): unsigned sysctl_hung_task_warnings cannot be less than 0 documentation: local_ops fix on_each_cpu | 05 December 2008, 05:39:41 UTC |
56d18e9 | Linus Torvalds | 05 December 2008, 05:39:21 UTC | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Return ENOSYS from sys32_syscall on 64bit kernels like elsewhere. MIPS: 64-bit: vmsplice needs to use the compat wrapper for o32 and N32. MIPS: o32: Fix number of arguments to splice(2). MIPS: Malta: Consolidate platform device code. MIPS: IP22, Fulong, Malta: Update defconfigs. MIPS: Malta: Add back RTC support MIPS: Fix potential DOS by untrusted user app. | 05 December 2008, 05:39:21 UTC |
1cb434b | Linus Torvalds | 05 December 2008, 05:38:55 UTC | Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs * 'for-linus' of git://oss.sgi.com/xfs/xfs: [XFS] Fix hang after disallowed rename across directory quota domains | 05 December 2008, 05:38:55 UTC |
576a488 | Dave Chinner | 03 December 2008, 22:09:34 UTC | [XFS] Fix hang after disallowed rename across directory quota domains When project quota is active and is being used for directory tree quota control, we disallow rename outside the current directory tree. This requires a check to be made after all the inodes involved in the rename are locked. We fail to unlock the inodes correctly if we disallow the rename when the target is outside the current directory tree. This results in a hang on the next access to the inodes involved in failed rename. Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by: Dave Chinner <david@fromorbit.com> Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> | 05 December 2008, 04:39:13 UTC |
b2c2717 | Anton Vorontsov | 04 December 2008, 17:52:31 UTC | powerpc/83xx: Enable FIXED_PHY in mpc834x_itx and mpc83xx defconfigs This is needed so that Vitesse 7385 5-port switch could work on MPC8349E-mITX boards. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | 05 December 2008, 00:47:09 UTC |
c6cb4df | David Daney | 31 October 2008, 18:23:09 UTC | MIPS: Return ENOSYS from sys32_syscall on 64bit kernels like elsewhere. When the o32 errno was changed to ENOSYS, we forgot to update the code for 64bit kernels. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 04 December 2008, 17:47:28 UTC |
8d13cb2 | Ralf Baechle | 03 December 2008, 17:03:27 UTC | MIPS: 64-bit: vmsplice needs to use the compat wrapper for o32 and N32. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 04 December 2008, 17:47:28 UTC |
08d3087 | Ralf Baechle | 03 December 2008, 16:33:17 UTC | MIPS: o32: Fix number of arguments to splice(2). The syscall code was assuming splice only takes 4 arguments so no stack arguments were being copied from the userspace stack to the kernel stack. As the result splice was likely to fail with EINVAL. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 04 December 2008, 17:47:28 UTC |
566a3b9 | Ralf Baechle | 01 December 2008, 08:16:08 UTC | MIPS: Malta: Consolidate platform device code. After adding the RTC platform device to malta-platform.c malta-mtd.c should get unified with the rest of the platform device code. | 04 December 2008, 17:47:28 UTC |
3e27cce | Ralf Baechle | 01 December 2008, 08:09:10 UTC | MIPS: IP22, Fulong, Malta: Update defconfigs. These haven't seen much attention for too long but particularly important enable RTC_CLASS and CONFIG_RTC_HCTOSYS so the wall clock time is set on kernel startup. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 04 December 2008, 17:47:28 UTC |
192cc7f | Tiejun Chen | 25 November 2008, 08:33:20 UTC | MIPS: Malta: Add back RTC support With the conversion of MIPS to RTC_LIB the old RTC driver CONFIG_RTC became unselectable. Fix by setting up a platform device. Also enable RTC_CLASS so system time gets set from RTC on kernel initialization. [Ralf: Original patch by Tiejun; polished nice and shiny by me] Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 04 December 2008, 17:47:27 UTC |
e807f95 | Vlad Malov | 18 November 2008, 23:05:46 UTC | MIPS: Fix potential DOS by untrusted user app. On a 64 bit kernel if an o32 syscall was made with a syscall number less than 4000, we would read the function from outside of the bounds of the syscall table. This led to non-deterministic behavior including system crashes. While we were at it we reworked the 32 bit version as well to use fewer instructions. Both 32 and 64 bit versions are use the same code now. Signed-off-by: Vlad Malov <Vlad.Malov@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 04 December 2008, 17:47:26 UTC |
410d2c8 | Hong H. Pham | 04 December 2008, 17:12:57 UTC | sparc64: Sync FPU state in VIS emulation handler. Copy the FPU state to the task's thread_info->fpregs for the VIS emulation functions to access. Signed-off-by: Hong H. Pham <hong.pham@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 04 December 2008, 17:12:57 UTC |
9adc138 | Andi Kleen | 04 December 2008, 12:33:35 UTC | x86: fix early panic with boot option "nosmp" Impact: fix boot crash with numcpus=0 on certain systems Fix early exception in __get_smp_config with nosmp. Bail out early when there is no MP table. Reported-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 04 December 2008, 15:33:51 UTC |
2cbed89 | Al Viro | 30 November 2008, 06:33:57 UTC | [PATCH] fix bogus argument of blkdev_put() in pktcdvd final close of ->bdev should match the initial open, i.e. get FMODE_READ | FMODE_NDELAY; FMODE_READ|FMODE_WRITE has been a braino. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 04 December 2008, 09:22:59 UTC |
fc9161e | Christoph Hellwig | 05 November 2008, 13:58:46 UTC | [PATCH 2/2] documnt FMODE_ constants Make sure all FMODE_ constants are documents, and ensure a coherent style for the already existing comments. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 04 December 2008, 09:22:58 UTC |
fd4ce1a | Christoph Hellwig | 05 November 2008, 13:58:42 UTC | [PATCH 1/2] kill FMODE_NDELAY_NOW Update FMODE_NDELAY before each ioctl call so that we can kill the magic FMODE_NDELAY_NOW. It would be even better to do this directly in setfl(), but for that we'd need to have FMODE_NDELAY for all files, not just block special files. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 04 December 2008, 09:22:57 UTC |
ebbefc0 | Christoph Hellwig | 05 November 2008, 13:54:41 UTC | [PATCH] clean up blkdev_get a little bit The way the bd_claim for the FMODE_EXCL case is implemented is rather confusing. Clean it up to the most logical style. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 04 December 2008, 09:22:56 UTC |
1c92560 | Andreas Schwab | 31 October 2008, 21:39:46 UTC | [PATCH] Fix block dev compat ioctl handling Commit 33c2dca4957bd0da3e1af7b96d0758d97e708ef6 (trim file propagation in block/compat_ioctl.c) removed the handling of some ioctls from compat_blkdev_driver_ioctl. That caused them to be rejected as unknown by the compat layer. Signed-off-by: Andreas Schwab <schwab@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 04 December 2008, 09:22:55 UTC |
50c396d | Al Viro | 30 November 2008, 06:47:12 UTC | [PATCH] kill obsolete temporary comment in swsusp_close() it had been put there to mark the call of blkdev_put() that needed proper argument propagated to it; later patch in the same series had done just that. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 04 December 2008, 09:22:54 UTC |
6c9bacb | john stultz | 02 December 2008, 02:34:41 UTC | time: catch xtime_nsec underflows and fix them Impact: fix time warp bug Alex Shi, along with Yanmin Zhang have been noticing occasional time inconsistencies recently. Through their great diagnosis, they found that the xtime_nsec value used in update_wall_time was occasionally going negative. After looking through the code for awhile, I realized we have the possibility for an underflow when three conditions are met in update_wall_time(): 1) We have accumulated a second's worth of nanoseconds, so we incremented xtime.tv_sec and appropriately decrement xtime_nsec. (This doesn't cause xtime_nsec to go negative, but it can cause it to be small). 2) The remaining offset value is large, but just slightly less then cycle_interval. 3) clocksource_adjust() is speeding up the clock, causing a corrective amount (compensating for the increase in the multiplier being multiplied against the unaccumulated offset value) to be subtracted from xtime_nsec. This can cause xtime_nsec to underflow. Unfortunately, since we notify the NTP subsystem via second_overflow() whenever we accumulate a full second, and this effects the error accumulation that has already occured, we cannot simply revert the accumulated second from xtime nor move the second accumulation to after the clocksource_adjust call without a change in behavior. This leaves us with (at least) two options: 1) Simply return from clocksource_adjust() without making a change if we notice the adjustment would cause xtime_nsec to go negative. This would work, but I'm concerned that if a large adjustment was needed (due to the error being large), it may be possible to get stuck with an ever increasing error that becomes too large to correct (since it may always force xtime_nsec negative). This may just be paranoia on my part. 2) Catch xtime_nsec if it is negative, then add back the amount its negative to both xtime_nsec and the error. This second method is consistent with how we've handled earlier rounding issues, and also has the benefit that the error being added is always in the oposite direction also always equal or smaller then the correction being applied. So the risk of a corner case where things get out of control is lessened. This patch fixes bug 11970, as tested by Yanmin Zhang http://bugzilla.kernel.org/show_bug.cgi?id=11970 Reported-by: alex.shi@intel.com Signed-off-by: John Stultz <johnstul@us.ibm.com> Acked-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Tested-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 04 December 2008, 07:43:02 UTC |
726c12f | Joseph Myers | 04 December 2008, 03:36:05 UTC | sparc64: Fix VIS emulation bugs This patch fixes some bugs in VIS emulation that cause the GCC test failure FAIL: gcc.target/sparc/pdist-3.c execution test for both 32-bit and 64-bit testing on hardware lacking these instructions. The emulation code for the pdist instruction uses RS1(insn) for both source registers rs1 and rs2, which is obviously wrong and leads to the instruction doing nothing (the observed problem), and further inspection of the code shows that RS1 uses a shift of 24 and RD a shift of 25, which clearly cannot both be right; examining SPARC documentation indicates the correct shift for RS1 is 14. This patch fixes the bug if single-stepping over the affected instruction in the debugger, but not if the testcase is run standalone. For that, Wind River has another patch I hope they will send as a followup to this patch submission. Signed-off-by: Joseph Myers <joseph@codesourcery.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 04 December 2008, 03:36:05 UTC |
0235439 | Eric Anholt | 26 November 2008, 21:58:13 UTC | drm/i915: Return error in i915_gem_set_to_gtt_domain if we're not in the GTT. It's only for flushing caches appropriately for GTT access, not for actually getting it there. Prevents potential smashing of cpu read/write domains on unbound objects. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com> | 04 December 2008, 01:24:47 UTC |
ac94a96 | Keith Packard | 21 November 2008, 07:30:27 UTC | drm/i915: Retry execbuffer pinning after clearing the GTT If we fail to pin all of the buffers in an execbuffer request, go through and clear the GTT and try again to see if its just a matter of fragmentation Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com> | 04 December 2008, 01:22:06 UTC |
646f0f6 | Keith Packard | 21 November 2008, 07:23:03 UTC | drm/i915: Move the execbuffer domain computations together This eliminates the dev_set_domain function and just in-lines it where its used, with the goal of moving the manipulation and use of invalidate_domains and flush_domains closer together. This also avoids calling add_request unless some domain has been flushed. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com> | 04 December 2008, 01:22:02 UTC |
c0d9082 | Keith Packard | 21 November 2008, 07:11:08 UTC | drm/i915: Rename object_set_domain to object_set_to_gpu_domain Now that the CPU and GTT domain operations are isolated to their own functions, the previously general-purpose set_domain function is now used only to set GPU domains. It also has no failure cases, which is important as this eliminates any possible interruption of the computation of new object domains and subsequent emmission of the flushing instructions into the ring. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com> | 04 December 2008, 01:21:58 UTC |
e47c68e | Eric Anholt | 14 November 2008, 21:35:19 UTC | drm/i915: Make a single set-to-cpu-domain path and use it wherever needed. This fixes several domain management bugs, including potential lack of cache invalidation for pread, potential failure to wait for set_domain(CPU, 0), and more, along with producing more intelligible code. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com> | 04 December 2008, 01:21:55 UTC |
2ef7eea | Eric Anholt | 10 November 2008, 18:53:25 UTC | drm/i915: Make a single set-to-gtt-domain path. This fixes failure to flush caches in the relocation update path, and failure to wait in the set_domain ioctl, each of which could lead to incorrect rendering. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com> | 04 December 2008, 01:21:52 UTC |
b670d81 | Eric Anholt | 15 November 2008, 00:27:47 UTC | drm/i915: If interrupted while setting object domains, still emit the flush. Otherwise, we would leave the objects in an inconsistent state, such as write_domain == 0 but on the flushing list. Signed-off-by: Dave Airlie <airlied@redhat.com> | 04 December 2008, 01:21:48 UTC |
ce44b0e | Eric Anholt | 07 November 2008, 00:00:31 UTC | drm/i915: Move flushing list cleanup from flush request retire to request emit. obj_priv->write_domain is "write domain if the GPU went idle now", not "write domain at this moment." By postponing the clear, we confused the concept, required more storage, and potentially emitted more flushes than are required. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com> | 04 December 2008, 01:21:45 UTC |
a7f014f | Eric Anholt | 25 November 2008, 22:02:05 UTC | drm/i915: Respect GM965/GM45 bit-17-instead-of-bit-11 option for swizzling. This fixes readpixels and buffer corruption when swapped out and in by disabling tiling on them. Now that we know that the bit 17 mode isn't just a mistake of older chipsets, we'll need to work on a clever fix so that we can get the performance of tiling on these chipsets, but that will require intrusive changes targeted at the next kernel release, not this one. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com> | 04 December 2008, 01:21:41 UTC |
004b50f | David Howells | 03 December 2008, 16:33:14 UTC | MN10300: Introduce barriers to replace removed volatiles in gdbstub 16550 driver Introduce into the MN10300 gdbstub 16550 driver a couple of barrier() calls to replace the removed volatility of the input/output index variables for the Rx ring buffer. A previous patch added them into the on-chip serial port driver. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 04 December 2008, 00:47:40 UTC |
8711cca | James Morris | 03 December 2008, 16:19:45 UTC | MAINTAINERS: Add security subsystem maintainer Add myself as overall maintainer of the security subsystem (generally, components under the top-level security directory). This addresses the lack of an official maintainer for the increasing number of security projects being incorporated into the kernel. Signed-off-by: James Morris <jmorris@namei.org> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 04 December 2008, 00:47:40 UTC |
feaf384 | Linus Torvalds | 04 December 2008, 00:45:56 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block * 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: fix setting of max_segment_size and seg_boundary mask block: internal dequeue shouldn't start timer block: set disk->node_id before it's being used When block layer fails to map iov, it calls bio_unmap_user to undo | 04 December 2008, 00:45:56 UTC |
a771132 | Linus Torvalds | 04 December 2008, 00:41:15 UTC | Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc/83xx: Fix MCU support merge issue in mpc8349emitx.dts powerpc: Fix dma_map_sg() cache flushing on non coherent platforms | 04 December 2008, 00:41:15 UTC |
2433c41 | Linus Torvalds | 04 December 2008, 00:40:37 UTC | Merge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linux * 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: NLM: client-side nlm_lookup_host() should avoid matching on srcaddr nfsd: use of unitialized list head on error exit in nfs4recover.c Add a reference to sunrpc in svc_addsock nfsd: clean up grace period on early exit | 04 December 2008, 00:40:37 UTC |
cd92a17 | Linus Torvalds | 04 December 2008, 00:20:19 UTC | iTCO_wdt: fix typo when setting TCO_EN bit The code used '&= 0x00002000' when it tried to set the TCO_EN bit, which obviously didn't set that bit at all, but instead just reset all the other bits in the SMI_EN register. This bug seemingly caused various random behavior, with Frans Pop reporting that X.org just silently hung at startup and Rafael Wysocki reports the fan spinning with full speed. See http://lkml.org/lkml/2008/12/3/178 http://bugzilla.kernel.org/show_bug.cgi?id=12162 The problem seems to have been triggered by "[WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboards" (commit 7cd5b08be3c489df11b559fef210b81133764ad4), but the bogus code existed before that too (in the "supermicro_old_pre_stop()" function), it just apparently never showed up due to different logic. In that commit the broken code got moved around and now gets executed much more. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Frans Pop <elendil@planet.nl> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 04 December 2008, 00:20:19 UTC |
e8e8e80 | Rusty Russell | 04 December 2008, 00:04:52 UTC | sparc: asm/bitops.h should define __fls bitops_64.h includes the generic one; pretty sure 32 should too. (Found by using __fls in generic code and breaking sparc defconfig build: thanks Stephen and linux-next!) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 04 December 2008, 00:04:52 UTC |
66a05d6 | Ingo Molnar | 03 December 2008, 17:52:46 UTC | Merge branch 'oprofile-for-tip' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into x86/urgent | 03 December 2008, 17:52:46 UTC |
3d337c6 | William Cohen | 30 November 2008, 20:39:10 UTC | x86/oprofile: fix Intel cpu family 6 detection Alan Jenkins wrote: > This is on an EeePC 701, /proc/cpuinfo as attached. > > Is this expected? Will the next release work? > > Thanks, Alan > > # opcontrol --setup --no-vmlinux > cpu_type 'unset' is not valid > you should upgrade oprofile or force the use of timer mode > > # opcontrol -v > opcontrol: oprofile 0.9.4 compiled on Nov 29 2008 22:44:10 > > # cat /dev/oprofile/cpu_type > i386/p6 > # uname -r > 2.6.28-rc6eeepc Hi Alan, Looking at the kernel driver code for oprofile it can return the "i386/p6" for the cpu_type. However, looking at the user-space oprofile code there isn't the matching entry in libop/op_cpu_type.c or the events/unit_mask files in events/i386 directory. The Intel AP-485 says this is a "Intel Pentium M processor model D". Seems like the oprofile kernel driver should be identifying the processor as "i386/p6_mobile" The driver identification code doesn't look quite right in nmi_init.c http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=blob;f=arch/x86/oprofile/nmi_int.c;h=022cd41ea9b4106e5884277096e80e9088a7c7a9;hb=HEAD has: 409 case 10 ... 13: 410 *cpu_type = "i386/p6"; 411 break; Referring to the Intel AP-485: case 10 and 11 should produce "i386/piii" case 13 should produce "i386/p6_mobile" I didn't see anything for case 12. Something like the attached patch. I don't have a celeron machine to verify that changes in this area of the kernel fix thing. -Will Signed-off-by: William Cohen <wcohen@redhat.com> Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Acked-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Robert Richter <robert.richter@amd.com> | 03 December 2008, 16:17:17 UTC |
dafdb61 | Anton Vorontsov | 27 November 2008, 17:36:45 UTC | powerpc/83xx: Fix MCU support merge issue in mpc8349emitx.dts Just found the merge issue in 442746989d92afc125040e0f29b33602ad94da99 ("powerpc/83xx: Add support for MCU microcontroller in .dts files"): the commit adds the MCU controller node into the DMA node, which is wrong because the MCU sits on the I2C bus. Fix this by moving the MCU node into the I2C controller node. The original patch[1] was OK though. ;-) Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | 03 December 2008, 15:56:02 UTC |
9ea84ad | Eric Dumazet | 02 December 2008, 06:21:21 UTC | oprofile: fix CPU unplug panic in ppro_stop() If oprofile statically compiled in kernel, a cpu unplug triggers a panic in ppro_stop(), because a NULL pointer is dereferenced. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Robert Richter <robert.richter@amd.com> | 03 December 2008, 14:58:51 UTC |
0e435ac | Milan Broz | 03 December 2008, 11:55:08 UTC | block: fix setting of max_segment_size and seg_boundary mask Fix setting of max_segment_size and seg_boundary mask for stacked md/dm devices. When stacking devices (LVM over MD over SCSI) some of the request queue parameters are not set up correctly in some cases by default, namely max_segment_size and and seg_boundary mask. If you create MD device over SCSI, these attributes are zeroed. Problem become when there is over this mapping next device-mapper mapping - queue attributes are set in DM this way: request_queue max_segment_size seg_boundary_mask SCSI 65536 0xffffffff MD RAID1 0 0 LVM 65536 -1 (64bit) Unfortunately bio_add_page (resp. bio_phys_segments) calculates number of physical segments according to these parameters. During the generic_make_request() is segment cout recalculated and can increase bio->bi_phys_segments count over the allowed limit. (After bio_clone() in stack operation.) Thi is specially problem in CCISS driver, where it produce OOPS here BUG_ON(creq->nr_phys_segments > MAXSGENTRIES); (MAXSEGENTRIES is 31 by default.) Sometimes even this command is enough to cause oops: dd iflag=direct if=/dev/<vg>/<lv> of=/dev/null bs=128000 count=10 This command generates bios with 250 sectors, allocated in 32 4k-pages (last page uses only 1024 bytes). For LVM layer, it allocates bio with 31 segments (still OK for CCISS), unfortunatelly on lower layer it is recalculated to 32 segments and this violates CCISS restriction and triggers BUG_ON(). The patch tries to fix it by: * initializing attributes above in queue request constructor blk_queue_make_request() * make sure that blk_queue_stack_limits() inherits setting (DM uses its own function to set the limits because it blk_queue_stack_limits() was introduced later. It should probably switch to use generic stack limit function too.) * sets the default seg_boundary value in one place (blkdev.h) * use this mask as default in DM (instead of -1, which differs in 64bit) Bugs related to this: https://bugzilla.redhat.com/show_bug.cgi?id=471639 http://bugzilla.kernel.org/show_bug.cgi?id=8672 Signed-off-by: Milan Broz <mbroz@redhat.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Cc: Neil Brown <neilb@suse.de> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Tejun Heo <htejun@gmail.com> Cc: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 03 December 2008, 11:55:55 UTC |
c36910c | Ingo Molnar | 03 December 2008, 11:54:45 UTC | Merge branch 'iommu-fixes-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent | 03 December 2008, 11:54:45 UTC |
53a0880 | Tejun Heo | 03 December 2008, 11:41:26 UTC | block: internal dequeue shouldn't start timer blkdev_dequeue_request() and elv_dequeue_request() are equivalent and both start the timeout timer. Barrier code dequeues the original barrier request but doesn't passes the request itself to lower level driver, only broken down proxy requests; however, as the original barrier code goes through the same dequeue path and timeout timer is started on it. If barrier sequence takes long enough, this timer expires but the low level driver has no idea about this request and oops follows. Timeout timer shouldn't have been started on the original barrier request as it never goes through actual IO. This patch unexports elv_dequeue_request(), which has no external user anyway, and makes it operate on elevator proper w/o adding the timer and make blkdev_dequeue_request() call elv_dequeue_request() and add timer. Internal users which don't pass the request to driver - barrier code and end_that_request_last() - are converted to use elv_dequeue_request(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 03 December 2008, 11:41:26 UTC |
bf91db1 | Cheng Renquan | 20 November 2008, 07:37:37 UTC | block: set disk->node_id before it's being used disk->node_id will be refered in allocating in disk_expand_part_tbl, so we should set it before disk->node_id is refered. Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 03 December 2008, 11:41:20 UTC |
53cc0b2 | Petr Vandrovec | 19 November 2008, 10:12:14 UTC | When block layer fails to map iov, it calls bio_unmap_user to undo mapping. Which is good if pages were mapped - but if they were provided by someone else and just copied then bad things happen - pages are released once here, and once by caller, leading to user triggerable BUG at include/linux/mm.h:246. Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 03 December 2008, 11:41:20 UTC |
09ee17e | Joerg Roedel | 03 December 2008, 11:19:27 UTC | AMD IOMMU: fix possible race while accessing iommu->need_sync The access to the iommu->need_sync member needs to be protected by the iommu->lock. Otherwise this is a possible race condition. Fix it with this patch. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> | 03 December 2008, 11:20:46 UTC |
f91ba19 | Joerg Roedel | 25 November 2008, 11:56:12 UTC | AMD IOMMU: set device table entry for aliased devices In some rare cases a request can arrive an IOMMU with its originial requestor id even it is aliased. Handle this by setting the device table entry to the same protection domain for the original and the aliased requestor id. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> | 03 December 2008, 11:20:46 UTC |
eac9fbc | Richard Kennedy | 24 November 2008, 13:53:24 UTC | AMD IOMMU: struct amd_iommu remove padding on 64 bit Remove 16 bytes of padding from struct amd_iommu on 64bit builds reducing its size to 120 bytes, allowing it to span one fewer cachelines. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> | 03 December 2008, 11:20:46 UTC |
2019554 | Roel Kluin | 02 December 2008, 21:55:38 UTC | check_hung_task(): unsigned sysctl_hung_task_warnings cannot be less than 0 Impact: fix warnings-limit cutoff check for debug feature unsigned sysctl_hung_task_warnings cannot be less than 0 Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 03 December 2008, 09:11:51 UTC |
70d7d35 | Joerg Roedel | 02 December 2008, 19:16:03 UTC | x86: fix broken flushing in GART nofullflush path Impact: remove stale IOTLB entries In the non-default nofullflush case the GART is only flushed when next_bit wraps around. But it can happen that an unmap operation unmaps memory which is behind the current next_bit location. If these addresses are reused it may result in stale GART IO/TLB entries. Fix this by setting the GART next_bit always behind an unmapped location. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 03 December 2008, 09:02:41 UTC |
ee4ee52 | Chris Torek | 03 December 2008, 08:47:28 UTC | sparc64: Fix bug in PTRACE_SETFPREGS64 handling. From: Chris Torek <chris.torek@windriver.com> >The SPARC64 kernel code for PTRACE_SETFPREGS64 appears to be an exact copy >of that for PTRACE_GETFPREGS64. This means that gdbserver and native >64-bit GDB cannot set floating-point registers. It looks like a simple typo. Signed-off-by: David S. Miller <davem@davemloft.net> | 03 December 2008, 08:47:28 UTC |
2434bbb | Benjamin Herrenschmidt | 30 November 2008, 18:53:40 UTC | powerpc: Fix dma_map_sg() cache flushing on non coherent platforms On PowerPC 4xx or other non cache-coherent platforms, we lost the appropriate cache flushing in dma_map_sg() when merging the 32 and 64-bit DMA code (commit 4fc665b88a79a45bae8bbf3a05563c27c7337c3d, "powerpc: Merge 32 and 64-bit dma code"). This restores it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> | 03 December 2008, 07:24:08 UTC |
f6f7b52 | Linus Torvalds | 02 December 2008, 23:58:20 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog * git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] hpwdt: Fix kdump when using hpwdt [WATCHDOG] hpwdt: set the mapped BIOS address space as executable [WATCHDOG] iTCO_wdt: add PCI ID's for ICH9 & ICH10 chipsets [WATCHDOG] iTCO_wdt : correct status clearing [WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboards [WATCHDOG] fix mtx1_wdt compilation failure | 02 December 2008, 23:58:20 UTC |
51eaaa6 | Linus Torvalds | 02 December 2008, 23:56:55 UTC | Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6 * 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: pre-allocate bulk-read buffer UBIFS: do not allocate too much UBIFS: do not print scary memory allocation warnings UBIFS: allow for gaps when dirtying the LPT UBIFS: fix compilation warnings MAINTAINERS: change UBI/UBIFS git tree URLs UBIFS: endian handling fixes and annotations UBIFS: remove printk | 02 December 2008, 23:56:55 UTC |
b7d6266 | Linus Torvalds | 02 December 2008, 23:56:17 UTC | Merge branch 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: MMU: avoid creation of unreachable pages in the shadow KVM: ppc: stop leaking host memory on VM exit KVM: MMU: fix sync of ptes addressed at owner pagetable KVM: ia64: Fix: Use correct calling convention for PAL_VPS_RESUME_HANDLER KVM: ia64: Fix incorrect kbuild CFLAGS override KVM: VMX: Fix interrupt loss during race with NMI KVM: s390: Fix problem state handling in guest sigp handler | 02 December 2008, 23:56:17 UTC |
e6d9f0f | Linus Torvalds | 02 December 2008, 23:55:43 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix offset calculation in compute_size() rtc: rtc-starfire fixes | 02 December 2008, 23:55:43 UTC |
e1825e7 | Linus Torvalds | 02 December 2008, 23:55:05 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) MAINTAINERS: add netdev to ATM ATM: horizon, fix hrz_probe fail path pppol2tp: Add missing sock_put() in pppol2tp_release() net: Fix soft lockups/OOM issues w/ unix garbage collector macvlan: don't broadcast PAUSE frames to macvlan devices Phonet: fix oops in phonet_address_del() on non-Phonet device netfilter: ctnetlink: fix GFP_KERNEL allocation under spinlock sungem: Fix PCS_MIICTRL register write in gem_init_phy(). net: make skb_truesize_bug() call WARN() net: hp-plus uses eip_poll net/wireless/reg.c: fix bad WARN_ON in if statement ath5k: disable beacon filter when station is not associated ath5k: fix Security issue in DebugFS part of ath5k ath9k: correct expected max RX buffer size ath9k: Fix SW-IOMMU bounce buffer starvation mac80211 : Fix setting ad-hoc mode and non-ibss channel iwlagn: fix DMA sync phylib: Add Vitesse VSC8221 SGMII PHY rose: zero length frame filtering in af_rose.c bridge: netfilter: fix update_pmtu crash with GRE ... | 02 December 2008, 23:55:05 UTC |
5d279dc | Linus Torvalds | 02 December 2008, 23:53:41 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Update defconfigs for 2.6.28-rc7 macfb: Do not overflow fb_fix_screeninfo.id | 02 December 2008, 23:53:41 UTC |
e2e2983 | Linus Torvalds | 02 December 2008, 23:53:10 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: alim15x3: fix sparse warning ide: remove dead code from drive_is_ready() ide: fix build for DEBUG_PM ide: respect current DMA setting during resume ide: add SAMSUNG SP0822N with firmware WA100-10 to ivb_list[] amd74xx: workaround unreliable AltStatus register for nVidia controllers ide: fix the ide_release_lock imbalance | 02 December 2008, 23:53:10 UTC |
9a689bc | Linus Torvalds | 02 December 2008, 23:52:28 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] stex: switch to block timeout [SCSI] make scsi_eh_try_stu use block timeout [SCSI] megaraid_sas: switch to block timeout [SCSI] ibmvscsi: switch to block timeout [SCSI] aacraid: switch to block timeout [SCSI] zfcp: prevent double decrement on host_busy while being busy [SCSI] zfcp: fix deadlock between wq triggered port scan and ERP [SCSI] zfcp: eliminate race between validation and locking [SCSI] zfcp: verify for correct rport state before scanning for SCSI devs [SCSI] zfcp: returning an ERR_PTR where a NULL value is expected [SCSI] zfcp: Fix opening of wka ports [SCSI] zfcp: fix remote port status check [SCSI] fc_transport: fix old bug on bitflag definitions [SCSI] Fix hang in starved list processing | 02 December 2008, 23:52:28 UTC |
1122b19 | Mark Salter | 02 December 2008, 14:38:09 UTC | MN10300: Fix application of kernel module relocations This fixes the MN10300 kernel module linking to match the toolchain. RELA relocs don't use the value at the location being relocated. This has been working because the tools always leave the value at the target location cleared. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 23:52:07 UTC |
026bde1 | Dean Nelson | 02 December 2008, 14:06:01 UTC | sgi-gru: call fs_initcall() if statically linked If xpc.ko and gru.ko are both statically linked into the kernel, then xpc_init() can get called before gru_init() and make a call to one of the gru's exported functions before the gru has initialized itself. The end result is a NULL dereference. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 23:51:35 UTC |
7a0d794 | Kumar Gala | 02 December 2008, 19:37:01 UTC | powerpc: Use physical cpu id when setting the processor affinity In the CONFIG_SMP case the irq_choose_cpu() code was returning back a logical cpu id not the physical id. We were writing that directly into the HW register. We need to be calling get_hard_smp_processor_id() so irq_choose_cpu() always returns a physical cpu id. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 23:50:40 UTC |
9ff473b | Rik van Riel | 02 December 2008, 18:31:52 UTC | vmscan: evict streaming IO first Count the insertion of new pages in the statistics used to drive the pageout scanning code. This should help the kernel quickly evict streaming file IO. We count on the fact that new file pages start on the inactive file LRU and new anonymous pages start on the active anon list. This means streaming file IO will increment the recent scanned file statistic, while leaving the recent rotated file statistic alone, driving pageout scanning to the file LRUs. Pageout activity does its own list manipulation. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Tested-by: Gene Heskett <gene.heskett@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 23:50:40 UTC |
f1d0b06 | Kay Sievers | 02 December 2008, 18:31:50 UTC | bdi: register sysfs bdi device only once per queue Devices which share the same queue, like floppies and mtd devices, get registered multiple times in the bdi interface, but bdi accounts only the last registered device of the devices sharing one queue. On remove, all earlier registered devices leak, stay around in sysfs, and cause "duplicate filename" errors if the devices are re-created. This prevents the creation of multiple bdi interfaces per queue, and the bdi device will carry the dev_t name of the block device which is the first one registered, of the pool of devices using the same queue. [akpm@linux-foundation.org: add a WARN_ON so we know which drivers are misbehaving] Tested-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 23:50:40 UTC |
1b79cd0 | Junjiro R. Okajima | 02 December 2008, 18:31:46 UTC | nfsd: fix vm overcommit crash fix #2 The previous patch from Alan Cox ("nfsd: fix vm overcommit crash", commit 731572d39fcd3498702eda4600db4c43d51e0b26) fixed the problem where knfsd crashes on exported shmemfs objects and strict overcommit is set. But the patch forgot supporting the case when CONFIG_SECURITY is disabled. This patch copies a part of his fix which is mainly for detecting a bug earlier. Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Junjiro R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 23:50:40 UTC |
ae4e143 | Geert Uytterhoeven | 02 December 2008, 19:58:26 UTC | m68k: Update defconfigs for 2.6.28-rc7 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> | 02 December 2008, 19:58:26 UTC |
9596401 | Hannes Eder | 02 December 2008, 19:40:04 UTC | alim15x3: fix sparse warning Fix this sparse warning: drivers/ide/alim15x3.c:594:2: warning: returning void-valued expression Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 02 December 2008, 19:40:04 UTC |
a366380 | Bartlomiej Zolnierkiewicz | 02 December 2008, 19:40:04 UTC | ide: remove dead code from drive_is_ready() We guarantee 400ns delay at the time of issuing the command. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 02 December 2008, 19:40:04 UTC |
6b7d8fc | Bartlomiej Zolnierkiewicz | 02 December 2008, 19:40:03 UTC | ide: fix build for DEBUG_PM Also while at it: * Drop unused arguments from ide_complete_power_step(). * Move DEBUG_PM printk() from ide_end_drive_cmd() to ide_complete_power_step(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 02 December 2008, 19:40:03 UTC |
e9eb838 | Bartlomiej Zolnierkiewicz | 02 December 2008, 19:40:03 UTC | ide: respect current DMA setting during resume Respect current DMA setting during resume, otherwise PIO timings may get destroyed if host uses shared PIO/MWDMA timings. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 02 December 2008, 19:40:03 UTC |
c7b997b | Bartlomiej Zolnierkiewicz | 02 December 2008, 19:40:03 UTC | ide: add SAMSUNG SP0822N with firmware WA100-10 to ivb_list[] Should fix kernel.org bug #10225: http://bugzilla.kernel.org/show_bug.cgi?id=10225 Reported-by: Matthias B. <haferfrost@web.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 02 December 2008, 19:40:03 UTC |
6636487 | Bartlomiej Zolnierkiewicz | 02 December 2008, 19:40:03 UTC | amd74xx: workaround unreliable AltStatus register for nVidia controllers It seems that on some nVidia controllers using AltStatus register can be unreliable so default to Status register if the PCI device is in Compatibility Mode. In order to achieve this: * Add ide_pci_is_in_compatibility_mode() inline helper to <linux/ide.h>. * Add IDE_HFLAG_BROKEN_ALTSTATUS host flag and set it in amd74xx host driver for nVidia controllers in Compatibility Mode. * Teach actual_try_to_identify() and drive_is_ready() about the new flag. This fixes the regression caused by removal of CONFIG_IDEPCI_SHARE_IRQ config option in 2.6.25 and using AltStatus register unconditionally when available (kernel.org bugs #11659 and #10216). [ Moreover for CONFIG_IDEPCI_SHARE_IRQ=y (which is what most people and distributions use) it never worked correctly. ] Thanks to Remy LABENE and Lars Winterfeld for help with debugging the problem. More info at: http://bugzilla.kernel.org/show_bug.cgi?id=11659 http://bugzilla.kernel.org/show_bug.cgi?id=10216 Reported-by: Remy LABENE <remy.labene@free.fr> Tested-by: Remy LABENE <remy.labene@free.fr> Tested-by: Lars Winterfeld <lars.winterfeld@tu-ilmenau.de> Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 02 December 2008, 19:40:03 UTC |
f9e3326 | Michael Schmitz | 02 December 2008, 19:40:02 UTC | ide: fix the ide_release_lock imbalance ide_release_lock() spits out lots of: ide_release_lock: bug warnings on Atari Falcon. Fix the ide_release_lock imbalance. Signed-off-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 02 December 2008, 19:40:02 UTC |
89c223a | Finn Thain | 18 November 2008, 19:40:40 UTC | macfb: Do not overflow fb_fix_screeninfo.id Don't overflow the 16-character fb_fix_screeninfo id string (fixes some console erasing and blanking artifacts). Have the ID default to "Unknown" on machines with no built-in video and no nubus devices. Check for fb_alloc_cmap failure. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> | 02 December 2008, 19:27:15 UTC |
061e41f | Linus Torvalds | 02 December 2008, 03:59:23 UTC | Linux 2.6.28-rc7 | 02 December 2008, 03:59:23 UTC |
0d81514 | Linus Torvalds | 02 December 2008, 03:56:34 UTC | Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (25 commits) em28xx: remove backward compat macro added on a previous fix V4L/DVB (9748): em28xx: fix compile warning V4L/DVB (9743): em28xx: fix oops audio V4L/DVB (9742): em28xx-alsa: implement another locking schema V4L/DVB (9732): sms1xxx: use new firmware for Hauppauge WinTV MiniStick V4L/DVB (9691): gspca: Move the video device to a separate area. V4L/DVB (9690): gspca: Lock the subdrivers via module_get/put. V4L/DVB (9689): gspca: Memory leak when disconnect while streaming. V4L/DVB (9668): em28xx: fix a race condition with hald V4L/DVB (9664): af9015: don't reconnect device in USB-bus V4L/DVB (9647): em28xx: void having two concurrent control URB's V4L/DVB (9646): em28xx: avoid allocating/dealocating memory on every control urb V4L/DVB (9645): em28xx: Avoid memory leaks if registration fails V4L/DVB (9639): Make dib0700 remote control support work with firmware v1.20 V4L/DVB (9635): v4l: s2255drv fix firmware test on big-endian V4L/DVB (9634): Make sure the i2c gate is open before powering down tuner V4L/DVB (9632): make em28xx aux audio input work V4L/DVB (9631): Make s2api work for ATSC support V4L/DVB (9627): em28xx: Avoid i2c register error for boards without eeprom V4L/DVB (9608): Fix section mismatch warning for dm1105 during make ... | 02 December 2008, 03:56:34 UTC |
9c84ba4 | Andrew Morton | 01 December 2008, 21:14:08 UTC | drivers/gpu/drm/i915/i915_irq.c: fix warning drivers/gpu/drm/i915/i915_irq.c: In function 'i915_disable_pipestat': drivers/gpu/drm/i915/i915_irq.c:101: warning: control may reach end of non-void function 'i915_pipestat' being inlined Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 03:55:25 UTC |
09a8126 | Jarkko Lavinen | 01 December 2008, 21:14:08 UTC | i82875p_edac: fix module remove Fix module removal bugs of i82875p_edac. Also i82975x_edac code seems to have the same module removal bugs as in i82875p_edac. The problems were: 1. In module removal i82875p_remove_one() is never called. Variable i82875p_registered is newer changed from 1, which guarantees i82875p_remove_one() is not called (and even if it were called, it would be called in wrong order). As a result, the edac_mc workque is not stopped and keeps probing. If kernel debugging options are not enabled, user may not notice anything going wrong. if debugging options are enabled and I do "rmmod i82875p_edac", I get: edac debug: edac_pci_workq_function() checking BUG: unable to handle kernel paging request at f882d16f ... call trace: [<f8834df3>] ? edac_mc_workq_function+0x55/0x7e [edac_core] [<c0233974>] ? run_workqueue+0xd7/0x1a5 [<c023392f>] ? run_workqueue+0x92/0x1a5 [<f8834d9e>] ? edac_mc_workq_function+0x0/0x7e [edac_core] [<c0233af9>] ? worker_thread+0xb7/0xc3 [<c0236a7b>] ? autoremove_wake_function+0x0/0x33 [<c0233a42>] ? worker_thread+0x0/0xc3 [<c0236809>] ? kthread+0x3b/0x61 [<c02367ce>] ? kthread+0x0/0x61 [<c0204587>] ? kernel_thread_helper+0x7/0x10 Fix for this is to get rid of needles variable i82875p_registered altogether and run i82875p_remove_one() *before* pci_unregister_driver(). 2. edac_mc_del_mc() uses mci after freeing mci edac_mc_del_mc() calls calls edac_remove_sysfs_mci_device(). The kobject refcount of mci drops to 0 and mci is freed. After this mci is accessed via debug print and i82875p_remove_one() still uses mci->pvt and tries to free mci again with edac_mc_free(). The fix for this is add kobject_get(&mci->edac_mci_kobj) after edac_mc_alloc(). Then the mci is still available after returning from edac_mc_del_mc() with refcount 1, and mci->pvt is still available. When i82875p_remove_one() finally calls edac_mc_free(), this will cause kobject_put() and mci is released properly. Signed-off-by: Jarkko Lavinen <jlavi@iki.fi> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 03:55:25 UTC |
307d114 | Jarkko Lavinen | 01 December 2008, 21:14:06 UTC | i82875p_edac: fix overflow device resource setup When I do "modprobe i82875p_edac" on my Asus P4C800 MB on kernels 2.6.26 or later, the module load fails due to BAR 0 collision. On 2.6.25 the module loads just fine. The overflow device on the MB seems to be hidden and its resources are not allocated at normal PCI bus init. Log shows the missing resource problem: EDAC DEBUG: i82875p_probe1() PCI: 0000:00:06.0 reg 10 32bit mmio: [fecf0000, fecf0fff] pci 0000:00:06.0: device not available because of BAR 0 [0xfecf0000-0xfecf0fff] collisions EDAC i82875p: i82875p_setup_overfl_dev(): Failed to enable overflow device The patch below fixes this by calling pci_bus_assign_resources() after the overflow device is revealed and added to the bus. With this patch I am again able to load and use the module. Signed-off-by: Jarkko Lavinen <jlavi@iki.fi> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 03:55:25 UTC |
bca404a | Dmitry Baryshkov | 01 December 2008, 21:14:05 UTC | fbdev: fix FB console blanking The commit aef7db4bd5a3b6068dfa05919a3d685199eed116 fixed the problem with recursive locking in fb blanking code if blank is caused by user setting the /sys/class/graphics/fb*/blank. However this broke the fbcon timeout blanking. If you use a driver that defines ->fb_blank operation and at the same time that driver relies on other driver (e.g. backlight or lcd class) to blank the screen, when the fbcon times out and tries to blank the fb, it will call only fb driver blanker and won't notify the other driver. Thus FB output is disabled, but the screen isn't blanked. Restore fbcon blanking and at the same time apply the proper fix for the above problem: if fbcon_blank is called with FBINFO_FLAG_USEREVENT, we are already called through notification from fb_blank, thus we don't have to blank the fb again. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 03:55:25 UTC |
0380155 | Randy Dunlap | 01 December 2008, 21:14:04 UTC | ntfs: don't fool kernel-doc kernel-doc handles macros now (it has for quite some time), so change the ntfs_debug() macro's kernel-doc to be just before the macro instead of before a phony function prototype. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Anton Altaparmakov <aia21@cantab.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 03:55:25 UTC |
ced6909 | Randy Dunlap | 01 December 2008, 21:14:03 UTC | kernel-doc: handle varargs cleanly The method for listing varargs in kernel-doc notation is: * @...: these arguments are printed by the @fmt argument but scripts/kernel-doc is confused: it always lists varargs as: ... variable arguments and ignores the @...: line's description, but then prints that line after the list of function parameters as though it's not part of the function parameters. This patch makes kernel-doc print the supplied @... description if it is present; otherwise a boilerplate "variable arguments" is printed. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 03:55:25 UTC |
6ff2d39 | Manfred Spraul | 01 December 2008, 21:14:02 UTC | lib/idr.c: fix rcu related race with idr_find 2nd part of the fixes needed for http://bugzilla.kernel.org/show_bug.cgi?id=11796. When the idr tree is either grown or shrunk, then the update to the number of layers and the top pointer were not atomic. This race caused crashes. The attached patch fixes that by replicating the layers counter in each layer, thus idr_find doesn't need idp->layers anymore. Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Clement Calmels <cboulte@gmail.com> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Cc: Pierre Peiffer <peifferp@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 03:55:25 UTC |
1d678f3 | FUJITA Tomonori | 01 December 2008, 21:14:01 UTC | DMA-API.txt: fix description of pci_map_sg/dma_map_sg scatterlists handling - pci_map_sg/dma_map_sg are used with a scatter gather list that doesn't come from the block layer (e.g. some network drivers do). - how IOMMUs merge adjacent elements of the scatter/gather list is independent of how the block layer determines sees elements. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 03:55:24 UTC |
4280e31 | David Howells | 01 December 2008, 21:14:00 UTC | frv: fix mmap2 error handling Fix the error handling in sys_mmap2(). Currently, if the pgoff check fails, fput() might have to be called (which it isn't), so do the pgoff check first, before fget() is called. Signed-off-by: David Howells <dhowells@redhat.com> Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 03:55:24 UTC |
a800599 | Arjan van de Ven | 01 December 2008, 21:14:00 UTC | taint: add missing comment The description for 'D' was missing in the comment... (causing me a minute of WTF followed by looking at more of the code) Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 03:55:24 UTC |
c4c6fa9 | Benjamin Herrenschmidt | 01 December 2008, 21:13:58 UTC | radeonfb: fix problem with color expansion & alignment The engine on some radeon variants locks up if color expansion is called for non aligned source data. This patch enables a feature of the core fbdev to request aligned input pixmaps and uses the HW clipping engine to clip the output to the requested size Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11875 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: James Cloos <cloos@jhcloos.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "David S. Miller" <davem@davemloft.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 03:55:24 UTC |
b93c35f | Ben Dooks | 01 December 2008, 21:13:57 UTC | spi: fix spi_s3c24xx_gpio num_chipselect The spi master driver must have num_chipselect set to allow the bus to initialise. Pass this through the platform data. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 December 2008, 03:55:24 UTC |